Used Hydraulic Shearing Machine for sale (71,752)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1994, working width: 4,000 mm, sheet thickness (max.): 6 mm, back gauge: 700 mm, overall weight: 7,500 kg, distance between stands: 4,010 mm, TECHNICAL DETAILS Sheet width: 4,000 mm Sheet thickness: 6 mm Frame gap: 4,010 mm Gusdjyhmfzopfx Agfoa Back gauge: 700 mm MACHINE DETAILS Machine weight: 7,500 kg Total power: 16 kW

Condition: used, functionality: fully functional, This listing is for an industrial guillotine shear designed for cutting sheet metal with a maximum cutting length of 3040 mm and a maximum cutting thickness of 12 mm. The machine is equipped with a motorised back gauge with an adjustment range of 1000 mm, allowing precise positioning of the material. The shear is fitted with 17 hold-down clamps to secure the material during cutting. The total connected electrical load is approximately 23 kW, operating at 400 V and 50 A. The machine weighs around 11 tonnes, with additional weight from attachments and accessories. Gedpfxeylzcie Agfoua Machine dimensions are approximately 4.5 m (length) x 4.0 m (width) x 2.2 m (height). Transport dimensions are about 5.0 m x 2.25 m x 2.2 m. Safety features include bright orange guards covering the moving parts in the upper cutting area and yellow safety fencing on the right side. Metal supports on the front bed help to hold the material securely during operation. The machine shows normal signs of wear consistent with industrial use, such as surface scratches and dirt. It is currently located in a well-lit industrial workshop environment, with visible hydraulic and mechanical components on the right side.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: 09233-K06P27, working width: 3,100 mm, stroke rate (max.): 10 1/min, sheet thickness (max.): 16 mm, distance between stands: 3,400 mm, working height: 900 mm, TECHNICAL DETAILS Sheet width: 3,100 mm Sheet thickness: 16 mm Frame gap: 3,400 mm Shearing angle: 2.5° Working height: 900 mm Backgauge: 1,000 mm Hold-downs: 14 units Strokes per minute: 10 MACHINE DETAILS Control: CYBELEC CybTouch 6 Total power requirement: 30 kW Dimensions & Weight Space required: approx. 4,150 x 2,360 x 2,450 mm Machine weight: approx. 16,400 kg Oil capacity: 500 l EQUIPMENT Gujdpfx Agoygw Epofsa Electric backgauge 1,000 mm Electric cutting gap adjustment Electric cutting angle adjustment Cutting length limitation Light barrier at rear of machine Finger guard at front Ball rollers in support table 1x side stop 2x front support arms Foot switch

Condition: new, HYDRAULIC SHEAR MVD MOD iSHEAR B 06-4000 COMPLETE WITH REAR PNEUMATIC SUPPORT. CNC ESA S 625 TECHNICAL SPECIFICATION Material cutting capacity 450N/mm2 06 mm Gjdsfh R Inopfx Agfoua Material cutting capacity 700N/mm2 04 mm Cutting length 4100 mm Fixed cutting angle 1.5° Blade press cylinders 18 Strokes per minute 10 - 14 Hollow 250 mm Motor power 10 kw Millimeter square and two sheet supports 1000 mm Rear register stroke 1000 mm Approximate weight 11000 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 1972, HELMUT LOTZE TYPE: KSHY30 Year of manufacture: 1972 Gsdpoyllrhjfx Agfjua Max. power: 5

Condition: good (used), functionality: fully functional, Year of construction: 2000, Used Safan guillotine shear Type HT 310-6 TS Capacity: 3100 x 6 mm Electrically adjustable backgauge, blade gap and cutting angle adjustment Equipped with pneumatic rear support table Gujdpeyglr Rofx Agfja

Condition: used, Technical details: plate width: 1000 mm plate thickness: 3,0 mm smallest sheet thickness: 0,5 mm distance between columns: 920 mm Number of Straightening rolls: oben 4x unten 4x Stück / pieces roll diameter: ca. 75 mm number of rollers: 2 oben und 2 unten St. weight of the machine ca.: 6,5 t Guodpfx Agjvgbgaefja dimensions L x W x H: 3,8 x 2,2 x 2,1 m This is a sheet metal straightening machine with hydraulic feed. Further features: 4 straightening top rolls Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 straightening bottom rolls Ø 75 x 830 mm, fixed, hydraulic 4 pull-out rollers Ø 110 x 480 mm, 2x top adjustable approx. 20 mm and 2x bottom, hydraulic Roller support Infeed height 1400 mm Hydraulic system equipment Operated externally Recommendation: complete conveyor system (decoiler + loading device + straightener with hydraulic feed) for sale with optional stock no. 0100572. *

Condition: used, Year of construction: 1995, Technical details: sheet width: 3000 mm plate thickness: 12 mm distance between columns: 3500 mm control: Cybelec DNC 10 G back gauge: 1200 motorisch mm cutting angle: 1,2 - 2,73 ° cutting gap adjustment: ja mm cutting capacity : 66.000 daN daN Knife length: 3100 mm down holder: 17 Stück interface: RS232 Table dimensions: 3200 x 600 mm total connected load: 22 kW weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t space requirements approx. LxWxH: ca. 4,5 x 2,6 x 2,1 m transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m The guillotine shear was put into operation for the first time in 1998. The DNC 10 G control unit was specially designed for guillotine shears. It has a numerical axis for controlling the backgauge and automatically calculates and regulates the cutting gap, the cutting angle and the cutting depth, taking into account the material to be cut. (Data from the manufacturer) Table with side stopL:930 x W:105 x H:42 mm 2 table extensions L:1600 x W:100 x 83 mm Angle fence (attached to table extension) Operation via control panel with swivel arm and foot control Gedpjvc Amtsfx Agfeua Equipment: Drain with rollers for clippings 2x protective grid *

Condition: used, Year of construction: 1992, Technical details: sheet width: 4050 mm plate thickness: 16 mm distance between columns: 4900 mm control for program: Robosoft SC5 Controller back gauge: 1000 motorisch cutting angle: 0,5° - 3° ° cutting gap adjustment: ja / jes mm down holder: 23 Stück height over floor: 1030 mm Table dimensions: L x B 4000 x 520 mm weight of the machine ca.: 19,2 t dimensions of machine: 5,2 x 2,2 x 2,78 m characteristics: - knife length 4100mm, 4 turns possible - Number of strokes: 5 - 11 strokes/min. - Table: side stop with linear scale, with stop bar 1000mm removable, feed aid via / with ball bearings - front support: LxWxH: 1600 x 1100 x 1000 mm; movable over roller rail, easy handling - backgauge adjustable, motor driven and foldable Operation via control panel with jib lenmgth arm and foot control Equipment: - light grid at backgauge Guedsu Icpcjpfx Agfoa - cut line ilumination Accessories: - 1 set (2 pieces) shearing blades *

Condition: new, Year of construction: 2026, Constructed from high-quality materials, this lift features a solid construction, ensuring durability and reliability in extreme operating conditions. The solid frame and stable platform enable the handling of even the heaviest loads, while ensuring stability and operator safety. Thanks to advanced control systems, the operation of the 10-ton machine lift becomes intuitive and precise. The operator can easily adjust the lifting height and smoothly control the speed, which enables effective work in various conditions. The claw lift is also equipped with a screw pin on which we can also lift machines or heavy objects. The safety of use of the 10-ton machine lift is a priority, which is why it is equipped with safety systems. To sum up, the 10-ton machine lift is an irreplaceable tool for industries requiring lifting and moving large and heavy loads. Thanks to its solid construction, ease of use and priority on safety, this lift provides invaluable support in everyday industrial tasks. Gusdpfovvk Aiex Agfsa Technical data: Maximum static load 10T Maximum lifting capacity at the head of the lifter 7,5T Maximum lifting capacity at the lifting foot 6T Minimum height (foot/head) 35 / 320 mm The hight of raising 160 mm Screw pin adjustment 0-80 mm Net weight 25 kg

Condition: new, Year of construction: 2026, Claw machine lift with an impressive lifting capacity of 20 tons is an excellent tool for industries that require huge loads. Equipped with a robust design and innovative technical solutions, this claw lift ensures efficiency, safety and reliability in every application. The main distinguishing feature of the claw jack is its claw lifting mechanism, which allows for reliable and precise gripping of various objects. Thanks to this, handling large and non-formine loads becomes much more efficient, and the operator has full control over the lifting process. The lift with a lifting capacity of 20 tons is not only strength, but also protection against failures, it guarantees safe lifting and transport of heavy loads to high altitudes. The claw lift design has been carefully designed to ensure maximum stability during operation. The solid frame and durable materials make the jack cope with difficult industrial conditions while maintaining full functionality and reliability. To sum up, a machine claw machine lift with a lifting capacity of 20 tons is a powerful tool that will meet even the most demanding industrial tasks. Its impressive load-bearing capacity and precise claw mechanism make it an invaluable support in the area of lifting and moving large loads in a variety of working environments. Technical data: Maximum static load 20T Maximum lifting capacity at the head of the lifter 15T Maximum lifting capacity at the lifting foot 12T Minimum height (foot/head) 40 / 325 mm The hight of raising 140 mm Screw pin adjustment 0-60 mm Net weight 68 kg Guodpfx Agevvk D Hofja

Condition: used, Technical details: dimension machine xH: 1,8 x 1,1 x 1,0 m Gusdpfx Agoxu Dx Djfoa

Year of construction: 2000, condition: good (used), Hydraulic machine vice Gsdjhcipkspfx Agfeua Make BUSCH Type:V2 HY 94.

Condition: excellent (used), Year of construction: 2014, actuation type: hydraulic, working width: 3,100 mm, stroke rate (min.): 13 1/min, sheet thickness (max.): 10 mm, table height: 800 mm, back gauge: 1,000 mm, power: 22 kW (29.91 HP), Equipment: CE marking, emergency stop, finger protection, foot remote control, safety light barrier, We hereby offer you a hydraulic swing beam shear of the brand "ERMAKSON", used, in very good condition. Please feel free to contact us for a quote. Godpfx Agjxvinmofsua

Condition: excellent (used), Year of construction: 2006, Technical Data: Working width: 2100 mm Bending capacity: 28.0 mm Pre-bending: 22.0 mm CNC control Top roller diameter: 350 mm Middle roller diameter: 330 mm Side roller diameter: 240 mm Hardened rollers Conical bending device via tilt adjustment of both side rollers Mobile control panel with digital display Motor power: 7.5 kW CE marking Dimensions (L x W x H): approx. 3600 x 1500 x 1500 mm Weight: approx. 4.5 t Gedpfx Agsx Dtt Asfoua The seller is not liable for typographical or data transmission errors. The machine's visual appearance, technical condition, and wear conform to its age; used machines are sold without any warranty.

Condition: excellent (used), functionality: fully functional, Cutting length: 2520 mm Sheet thickness at 400N/mm²: 4.0 mm Strokes per minute: 47 Back gauge approx.: 750 mm Throat depth: 350 mm . Very good original condition! . Equipment: Left side gauge, 750 mm Cutting gap adjustment Back gauge with vernier scale and magnifier (and light) Overload protection Gsdpfx Agsyiu Dhsfjua . Other: Both blades are sharp and have not yet been shimmed The cylinders are dry

Condition: good (used), GATTI HYDRAULIC BENDING MACHINE 4000X80 TON, 4 AXES, 200 mm RECESS. DIMENSIONS 440X180X270(h) cm, WEIGHT: 7100 KG Guedpfxsvzyzfj Agfoa

Condition: good (used), CMU HYDRAULIC SHEAR 3000X6, 300 mm RECESS, WITH MOTORIZED REGISTER, DIMENSIONS: 380 X180X 185 (h) cm Gsdjvzyw Hepfx Agfoua

Condition: good (used), Year of construction: 2006, sheet width 3100 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3120 mm down holder 14 Stück cutting angle 1°5 no. of strokes 14 Hub/min control ENC 100 table width 500 mm work height max. 880 mm oil volume 170 ltr. total power requirement 11.0 KW weight 5550 kg range L-W-H 3750 x 1950 x 1650 mm Machine was used for ALU processing no "heavy" sheet metal processing good condition (!) new price ~ 32.000 Euro - in checked conditions - machinevideo - ?v=o2LW7L2r7Xs ----- Swing cut guillotine shear with fixed cutting angle * with DURMA ENC 100 NC control unit * manual cutting gap adjustment from the front ----- Gjdpfx Aoycxgmsgfeua Equipment: - electro-hydraulic guillotine shears "swing cut" - with DURMA "ENC 100 NC" control unit * Backgauge preselection - X axis * Number of pieces (in automatic mode) * Control panel, front left * Retraction from backgauge on/off * Input of target/actual value procedure with button - NC electro-motorized backgauge (X axis) * on recirculating ball screws * Traversing speed 120 mm/sec. - Manual cutting gap adjustment, from the front - hydraulically acting hold-down device - 1x side stop 1,000 mm - 2x front support arms - Ball rollers in the front support table - Light barrier behind the machine (safety device) - 1x free-moving foot switch - Rear sheet metal chute - Operating instructions

Condition: good (used), functionality: fully functional, Year of construction: 2009, Expected in approx. 1 month: Used 4-meter CNC guillotine shear by Safan Model: M Shear 430 6 Capacity: 4300 x 6 mm High hold-down system Return to sender system Year of manufacture: 2009 Images shown are of another identical machine. Gusdpsycwaljfx Agfoa

Condition: ready for operation (used), Max. workpiece thickness: 20mm, including one unused and originally packed set of blades. Guedpfjim Ixfex Agfoa

Year of construction: 2005, condition: ready for operation (used), A hydraulic CNC plate shear Baykal is available. Cutting length: 3060mm, max. sheet thickness (St42): 10mm, operating pressure: 260bar, stroke rate: 12/min. Machine dimensions X/Y/Z: approx. 4000mm/2600mm/2000mm, weight: approx. 9600kg, control system: Delem DAC 310. Documentation available. On-site inspection is possible. Godpoya Hwzefx Agfsua

Condition: ready for operation (used), Year of construction: 2018, Width: 1860mm, depth: 800mm, height: 1900mm, weight: approx. 2.3t Rectangular notchers: 57 x 100mm, triangular notchers: 5 x 5 x 7.5mm. Notching station width: 330mm, working height: 915mm Guodpfxsrxflcs Agfja

Condition: excellent (used), METALLKRAFT Profile Steel Shear / Punch HPS 65 DS Combined Hydraulic Profile Steel Shear and Punch with Punching Station, Notching Station, and Flat Steel, Angle Steel, and Profile Steel Shear – enables simultaneous operation at punching and profile steel shear. Punching Station - Punching Force: 65 t - Punching Capacity: max. Ø 26 x 20 / Ø 57 x 10 mm* - Throat Depth: 305 mm - Stroke Length: max. 55 mm - Number of Strokes: 25 strokes/min - Working Height: 900 mm Rod Steel Shear - Cutting Capacity Round: max. Ø 45 mm* - Cutting Capacity Square: max. 45 x 45 mm* Angle Steel Shear - Cutting Capacity L-Profile 90°: 120 x 120 x 12 mm* - Cutting Capacity L-Profile 45°: 70 x 10 mm* - Cutting Capacity U/I Profile: 120 x 58 mm - Cutting Capacity T-Profile: 90 x 11 mm - Working Height: 1,140 mm Flat Steel Shear - Cutting Capacity 90°: max. 300 x 20 / 375 x 15 mm* - Miter Cut 45°: max. FL 100 x 15 mm* - Blade Length: 380 mm - Working Height: 900 mm Notching Station - Material Thickness: max. 10 mm* - Notching Width: max. 45 mm - Notching Depth: max. 90 mm - Notching Station: 100 x 100 x 10 mm Machine Data - Motor Power: 5.5 kW | 400 V - 50 Hz - Dimensions (LxWxH): 1700 x 950 x 1880 mm - Weight (net): approx. 1,600 kg Shipping on pallet via freight forwarder possible Europe-wide. Additional machines available! Take a look at our listings. If you have any questions, feel free to contact us by message or phone: Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Gsdexizanopfx Agfsua

Condition: used, functionality: fully functional, Year of construction: 1987, machine/vehicle number: 101536, Offered for sale is a hydraulic guillotine shear Manufacturer: Eisen und Hammerschmidt GmbH Model: TSS4-20 Year of manufacture: 1987 Serial No.: 101536 Capacity: 4 mm Working width: 2,000 mm Control: ELGO Type P8511 Light curtain system by SICK Used, fully functional condition. Collection by purchaser; assistance with dismantling/transport can be arranged if required. — If you are interested or have any questions, please feel free to send me a message. Viewing on site by appointment possible. Further metalworking machinery such as bench drills, press brakes, column drilling machines, eccentric presses, heavy-duty racking, welding tables, MIG welders, compressors, etc. – please take a look at my other listings. Location for viewing and collection: 12277 Berlin Domestic price net plus VAT Gjdpjx Da D Uefx Agfjua or Net export price Collection only – dismantling and transport by buyer or by arrangement. If you are interested or have any questions, please feel free to send me a message. Further photos and technical details available on request. All information is subject to change without notice. Errors and prior sale reserved. For further questions, please call Nous parlons Français / Мы говорим по-русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype We handle all customs and registration matters for an additional charge. For an extra fee, we can transfer the vehicles to the port.