Used Hydraulic Deep Drawing Press for sale (28,310)

Condition: used, Zschokke HAP 063a - 4/6 - Hydraulic press brake - Year of manufacture: 1967 Technical data - Max. bending force: 630 t - Max. oil pressure: 400 bar - Distance between uprights: 4100 mm - Max. bending length: 6000 mm - Overhang: 375 mm - Stroke (adjustable): 0 - 500 mm - Distance between tool clamping surfaces: 300 - 800 mm Hydraulic pumps: - Main pumps: 2 x 22 kW - Delivery rate at idle: 2 x 153 l/min - Delivery rate at full load: 2 x 33 l/min - Control pump: 0.75 kW Installation: - Footprint (W x D): 6960 x 3250 mm Gusdpezf Hniofx Aa Ejd - Height above ground: 4100 mm - Undercarriage, front: 2200 mm - Undercarriage, rear: 600 mm - Operating voltage: 3 x 400 V / 50 Hz - Machine weight: 51000 kg

Condition: good (used), Pressure 63to Stroke -400mm Distance ram-table 700mm Table size 1800x500mm Guodech Dacepfx Aa Eod MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 1985, I sell hydraulic press MÜLLER HEP 10.20.35, year of production 1985. the press worked until the very end in bdb condition. Review of the press in 2023. Gedpfxjudph Io Aa Ejud

Condition: excellent (used), High-end hydraulic tool from the renowned manufacturer CEMBRE. This device delivers high clamping force and convenient operation thanks to battery power. Gusdpfx Asy H Rdgja Esd Robust construction and reliability – equipment used in professional applications. 📊 Technical specifications: Manufacturer: CEMBRE Model: B35-50D Clamping force: 35 kN (approx. 4 tons) Max. cross-section: up to 150 mm² (Cu) Power supply: battery-powered Year of manufacture: 2010 📦 Included: CEMBRE hydraulic press Battery Charger Transport case Documentation Additional items as shown in the photos 📦 Condition: Very good technical condition Fully functional Normal signs of use Ready for work

Condition: excellent (used), I sell a Lukas baler in very good condition. Guodpfjum Htzox Aa Eed

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, pressing force: 500 t, stroke length: 400 mm, table width: 1,600 mm, table length: 900 mm, year of last overhaul: 2017, Equipment: safety light barrier, Dieffenbacher PO 500A press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2017. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Gedpjv E Nlzjfx Aa Ejud Dieffenbacher PO 500A press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2017. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: used, Mackey Bowley Hydraulic Press 100tonnes Capacity, 400mm Stroke, Table 700 x 750mm, Ram 160mm Diameter (Approx), Ram Base Plate Diameter 700mm, Model CM507/04 Gujdpeyabf Hsfx Aa Eod

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 1,600 mm, total height: 1,600 mm, total width: 1,000 mm, overall weight: 1,500 kg, input voltage: 400 V, OFFER OF THE WEEK! Metal Technics Polska Professional CNC machines, lasers, and metalworking equipment We are a manufacturer and importer of high-quality metalworking machines. We supply proven technologies from Poland, Europe, and Asia—used by hundreds of companies across Europe. For 15 years, we have focused on quality, precision, and reliability. HYDRAULIC PRESS BRAKE 1320x40 MM Touchscreen control + SERVO The press brake is used for sheet metal forming. During the ram cycle, the sheet can be bent to match the required geometric profile. The machine can be used in many industries, including electromechanical, light industry, agricultural machinery production, shipbuilding, automotive, and aerospace industries. Technical Data: Nominal force: 400 kN (40 tons) Working table length: 1320 mm Distance between columns: 900 mm Throat depth: 180 mm Ram stroke: 100 mm Daylight: 290 mm Back gauge range: 500 mm Approach speed: 80 mm/s Working speed: 9 mm/s Return speed: 80 mm/s Main motor power: 4 kW Dimensions: 1500 × 1300 × 1600 mm AMADA Tool Clamping System: Each press is equipped with a quick and safe tool clamping system. The Amada-Promecam system is a reliable manual technology that allows fast tool insertion without additional tools. Control System MTP 3212: Modern controllers combining ease of use with advanced programming capabilities. Godpjyr N E Esfx Aa Eeud Touchscreen interface Automatic bending angle calculation Storage of thousands of programs Functions: Manual programming (no visualization) Tool library and editing SD card memory Crowning correction: YES Angle correction: YES Axis correction: YES Safety: Side guards – protection against accidental contact Light curtains – stop the machine when intrusion is detected Rear safety zone – prevents access from the back Delivery available. Transport cost quoted individually.

Condition: excellent (used), Year of construction: 1959, functionality: fully functional, pressing force: 650 t, stroke length: 400 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 90,000 kg, working height: 1,600 mm, Equipment: safety light barrier, Becker & van Hüllen_ 35.11284 3-phase press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Becker & van Hüllen_ 35.11284 3-phase press Guodpfx Asv Hpnlea Eod A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, pressing force: 630 t, table width: 2,500 mm, table length: 1,600 mm, overall weight: 100,000 kg, Equipment: safety light barrier, Müller ZE 625 4 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2020. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Müller ZE 625 4 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2020. Gujdpjv Hp T Uofx Aa Esd New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: used, Year of construction: 1963, Single-column hydraulic press MÜLLER ZE 250/300-12.5 1.3-U, No. 586, year of manufacture 1963, pressing force 250 t, working area 1,300 x 1,100 x 1,000 mm, retrofitted with ROMA safety roller door (year of manufacture 2012) Gjdoyhqqnepfx Aa Esud

Condition: good (used), Year of construction: 1995, 2-column spotting press MOSSINI PO/2M/P800, No. 0481, year of manufacture 1995, pressing force 800 t, working area 3,200 x 2,000 x 1,800 mm Gusdpfx Aajyhquae Esd

Condition: ready for operation (used), Year of construction: 2010, pressing force: 400 t, stroke length: 400 mm, throat depth: 405 mm, clearance between the columns: 4,050 mm, total length: 6,100 mm, overall weight: 34,000 kg, Equipment: CE marking, documentation/manual, Hydraulic press brake Manufacturer: EHT - Trumpf, Type: TruBend 8400-50S Year of manufacture: 2010 Technical data Manufacturer: EHT / Trumpf Type: TruBend 8400-50S Year of manufacture: 2010 Capacity: 400 t Bending length: 5050 mm Distance between uprights: 4050 mm Throat depth: 405 mm Stroke of Y-axis: 400 mm Installation height: 720 mm Table width: 140 mm Motor power: 37 kW Oil capacity: 600 L Pneumatic connection: 6 +/- 1 bar Dimensions: approx. L 6.1 x W 2.8 x H 3.67 m Weight: approx. 34 t Equipment • Controlled axes: X, R, Y1, Y2, Z1, Z2 • Control system: Cybelec ModEva 10S, 2D – graphic control • Upper tool clamping system Trumpf/Wila, hydraulic • Lower tool clamping system Trumpf, hydraulic • CNC-controlled crowning • Safety light curtain Lazersafe • 2 pcs. CNC bending aids incl. parking position • Pneumatic die shifting • Foot switch Gsdjzd Tf Sspfx Aa Ejud • Very large tool package, as shown in the photos • LCB angle measuring system (2 x front, 2 x rear) All information without guarantee.

Condition: used, Year of construction: 1950, pressure 120 t draw back pressure 20 t Gujdpfxox Sr Evo Aa Ejd piston stroke 500 mm dayligth 600 mm usable table size 800 x 800 mm range L-W-H ca. 2,55 x 1,14 x 3,34 m weight ca. 3,5 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Year of construction: 1992, condition: used, Pressing force 40 t Effective stroke 500 mm power capacity 17 kW Gujdpfxezdvcas Aa Eod tracking travel 48 mm Overrun time 110 ms safety distance 176 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 2015, functionality: unexamined, total length: 5,270 mm, total height: 7,290 mm, total width: 5,436 mm, overall weight: 100,000 kg, power: 75 kW (101.97 HP), 1200 T HYDRAULIC PRESS WITH ARCH FRAME – MIB-HYDRO (platform not included) History: Year of manufacture: 2015 Date of acquisition: 03/2015 Mid-2018: Operation ceased Until today: Machine disassembled and stored Specifications: Thrust force = 1200 T Type: ARCH FRAME, Bi-Cylinder Maximum operating pressure = 285 bar Pressure control: Analog sensor Stroke control: Analog linear scale Stroke: V1 = 1000 mm Approach speed = 100 mm/s Return speed = 100 mm/s Dimensions of press platens: 2600 x 1400 mm Maximum clearance between platens (at top dead center): V1 = 2000 mm Slide guide type: (x8) prismatic faces Gedpfx Aasy T N A Ie Esud Working height = 1200 mm Mold loading system Control unit: SIEMENS S7-300 Hydraulic power unit power = 75 kW Weight = 100 T Dimensions (H x L x W) = 7300 x 5500 x 5300 mm Contact: Christian LEMBLE Price: 72000 (including VAT) MIB Hydro (your model) / Lemacher Hydraulique / Servopresse / Pinette P.E.I. (heavy presses, composites, stamping) / Schaal Technology (special presses) / Schuler (world leader, presses 800–2500 T) / Siempelkamp (heavy presses, forming, composites) / Wepuko PAHNKE (high-capacity hydraulic presses) / Beckwood / Dunkes (special presses, high precision) / Lasco Umformtechnik (heavy forming presses) / Faccin Group / Boldrini / OMCN / Hydrap Presses / Sangiacomo Presses / Beckwood Press Company (USA) — presses 1000–3000 T / Greenerd (USA) — heavy hydraulic presses / Macrodyne (Canada) — presses 1000–5000 T / Phoenix Hydraulic Presses (UK) / Prensa Juaristi (Spain) / Hidrogarne (Spain) / Hydromec (Italy/Spain) / Ermak Press (Turkey) / Yilmaz Machinery (Turkey) / Industrial cutting Cutting of large-sized parts (carpets, technical textiles, polymers) / Cutting of thick sheets or complex metal parts / Cutting of composites or polymer fibers with multi-punch tools. (Arch frame, bi-cylinder presses are designed to ensure parallelism of the slide, which is essential for these operations.) / Stamping / Forming Stamping of metal parts (steel, stainless steel, aluminum) / Cold or hot forming of structural parts / Shaping of automotive or aerospace parts / Compression / molding Compression of composite materials (SMC, BMC, fibers) / Molding of large technical parts / Pressing of polymer or rubber materials / Punching / cambering / straightening Punching of thick sheets / Cambering of profiles / Straightening of deformed parts (sheets, tubes, bars) / Special applications / Compression of technical powders / Pressure bonding / Mechanical tests requiring high thrust (1200 T) / Automotive industry: Cutting of carpets, foams, technical textiles / Stamping of body parts / Forming of structural parts / Aerospace & space: Forming of aluminum or titanium parts / Compression of high-performance composites / Metallurgy & metal processing: Punching, cambering, straightening / Cutting of thick sheets / Chemical industry & materials: Compression of powders / Molding of technical polymers / Technical textile & polymers: Cutting of large textile parts or polymer fibers / Food industry: Pressing of tools or molds for production / Recycling & recovery: Compression of recycled materials / Forming of parts made from recycled materials.

Condition: new, Year of construction: 2023, machine/vehicle number: 7YXXX, VIS G is the ideal and the most efficent solution for serap processing like stampings, trimmings, wires mostly recommended for the automotive industry, metal recyclers and non-ferrous metal remelting industry. Gjdjmqi Akjpfx Aa Eoud

Condition: good (used), Hydraulic press 10 tons. Installation height 400 mm Overhang 270 mm Width 1000 mm Without hydraulic pump Transport dimensions: Gedpfxjzdufyo Aa Ejud Height without pallet 1440 mm Width 1000 mm Depth 780 mm Weight 325 kg

Condition: ready for operation (used), Year of construction: 1979, Immediately available ex-location: Gusdpfxjzg Tg Ue Aa Ejd Hydraulic high-speed press Lauffer Type EPT 25 Year of manufacture: 1979 Inspected according to UVV Press force 25 t Stroke 160 mm Installation height 320 mm Throat depth 230 mm Table 500 x 360 mm Ram 250 x 210 mm Weight 2 t Drive power 7.5 kW Price: EUR 2,750 plus VAT, ex-location.

Condition: ready for operation (used), Year of construction: 1979, Immediately available ex-location: Hydraulic high-speed press Lauffer Type EPT 25 Year of manufacture: 1979 Gjdpjzg Tg Isfx Aa Esud Inspected according to UVV Press force 25 t Stroke 160 mm Installation height 320 mm Throat depth 230 mm Table 500 x 360 mm Ram 250 x 210 mm Weight 2 t Drive power 7.5 kW Price: EUR 2,750 plus VAT, ex-location.

Condition: ready for operation (used), Year of construction: 1977, Immediately available ex location: Hydraulic double-column straightening press Dunkes Type HDSR 75 Year of manufacture: 1977 Pressing force: 165 t 3 cylinders, pressing force per cylinder: 75 / 65 / 25 t Table: 1500 x 500 mm Stroke: 350 mm Drive power: 3 / 15 kW Weight: 6 t Gujdozg Tgzspfx Aa Esd Price: EUR 2,750— plus VAT, ex location

Condition: ready for operation (used), Year of construction: 1992, Available immediately from our location: Hydraulic single-column press, Edelhoff Type HEP 45 Year of manufacture 1992 Machine complies with the latest UVV regulations Pressing force 45 tons Table 1000 x 1000 mm Stroke 300 mm Drive power 7.5 kW Gsdpfxjzg Tgue Aa Eeud Weight 6 tons 4 guide pins of the upper ram are broken. These need to be unscrewed and replaced. Apart from that, the machine is in perfect working order. Price: EUR 3,000.00 plus VAT, ex works.

Condition: used, Year of construction: 2009, total length: 2,700 mm, total width: 1,700 mm, total height: 3,900 mm, Colour: Green Empty weight: 5.000 kg Guedpfxszdnzho Aa Eod - Year: 2009 - Documentation available: No - CE certificate present: No - Drive system: Conventional - Press model: Workshop press - Press force [ton]: 200 - Min. stroke [mm]: 1 - Max. stroke [mm]: 1100 - Table length [mm]: 730 - Table width [mm]: 1900 - Transport dimensions: 2700mm x 1700mm x 3900mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 1969, functionality: fully functional, pressing force: 160 t, stroke length: 650 mm, table width: 1,200 mm, table length: 800 mm, working height: 600 mm, Equipment: safety light barrier, Lasco TSP 160S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2019. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Lasco TSP 160S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2019. New Simatic S7 control system and new electrical cabinet. Gusdpfx Ajv E Rd Esa Ejd Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: excellent (used), Year of construction: 1962, functionality: fully functional, pressing force: 200 t, stroke length: 800 mm, table width: 970 mm, table length: 1,600 mm, year of last overhaul: 2022, die cushion force: 40 t, Equipment: safety light barrier, Lasco FP 222 S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2022. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Lasco FP 222 S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2022. New Simatic S7 control system and new electrical cabinet. Gusdpfev E Efdox Aa Esd Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.