Used Hydraulic Cnc Press Brake for sale (47,511)

Year of construction: 1986, condition: ready for operation (used), OFFERED FOR SALE DUE TO OVERCOMPLETION: Well maintained second hand hydraulic press brake, brand LVD, equipped with front support Model PPN 125/4000 S630 Built in 1986 TECHNICAL CHARACTERISTICS Max. pressure force 1250kN Max. oil pressure 310bar Gkodpfer Ezv Ujx Akyec Max. working length 4000mm Max. passage between the uprights 3150mm Max. stroke of the ram 150mm Distance table / ram 350mm Unloading 250mm Width of table 180mm Closing speed 90mm/s Working speed 7mm/s Return speed 55mm/s Motor power 10kW Approximate weight 13500kg Steered axes Y1,Y2,X STURING CNC TOUCH S-630 (New 2019) Very user-friendly Full touch screen (10") control with 2D graphic simulation controlled axes: Y,X,R cnc backgauge X-duo - R back gauge with 2 movable fingers ADDITIONAL TOOLS F10 H180 26° 7x508mm + 1x550mm in sections Multi-V M90 L4000mm Asking price excluding transport costs (for buyer). Note: only serious bids will be responded to!

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Gedsxpqy Djpfx Akyekc Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: new, Year of construction: 2026, functionality: fully functional, power: 8.5 kW (11.56 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 110 t, oil tank capacity: 200 l, total length: 3,850 mm, total width: 1,650 mm, total height: 2,680 mm, overall weight: 7,500 kg, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, MACHINE IN STOCK – AVAILABLE FOR IMMEDIATE DISPATCH! DELIVERY AVAILABLE THROUGHOUT EUROPE – WE CAN ARRANGE TRANSPORT DIRECTLY TO YOUR DESTINATION AT AN ADDITIONAL COST. CNC PRESS BRAKE SPB 110T × 3200 – HACO 70S – 4+1 AXES The SPB 110T × 3200 is a professional electro-hydraulic CNC press brake with a bending force of 110 tons and a working length of 3200 mm. Designed for precise sheet-metal bending in both individual and series production. The electro-hydraulic servo synchronization system and linear scales monitoring the ram position provide high accuracy, stability and repeatability. The machine is equipped with high-quality hydraulic, electrical and drive components from recognized manufacturers. HACO 70S CNC CONTROL – 4+1 AXES Gsdjy D Nvispfx Akyjkc • Y1/Y2 – independent control of the left and right sides of the ram • X – precise backgauge positioning • R – vertical adjustment of the backgauge fingers • V – automatic CNC table crowning compensation TECHNICAL DATA • Bending force: 1100 kN / 110 T • Working length: 3200 mm • Distance between columns: 2700 mm • Throat depth: 400 mm • Ram stroke: 200 mm • Maximum opening height: 480 mm • Controlled axes: Y1, Y2, X, R + V (4+1) • CNC controller: HACO 70S • Motor power: 8.5 kW • Fast approach speed: 180 mm/s • Bending speed: 13 mm/s • Return speed: 170 mm/s • Dimensions: 3850 × 1650 × 2680 mm PREMIUM COMPONENTS • CNC control system – HACO 70S • Servo motor and drive – INOVANCE / ESTUN • Main servo motor – INOVANCE / ESTUN • Main hydraulic valve – HACO + Rexroth • Hydraulic pump – Rexroth / HYTEK (USA SUNNY) • Hydraulic cylinders – HONGWEI / WUYANG • Backgauge ball screw – TAIWAN • Linear guides – TAIWAN • Hydraulic fittings – Germany EMB • Cylinder seals – Japan NOK • Linear scales – HACO • Main electrical components – Schneider • Laser safety protection – Italy DSP • Rear safety light curtain – LNTECH • Push-button quick tool clamping system • Foot pedal control ACCURACY • Ram positioning repeatability: ±0.01 mm • Ram positioning accuracy: ±0.02 mm • Backgauge repeatability: ±0.02 mm • Bending straightness: 0.3 mm / 1 m • Bending angle accuracy: ±1–1.5° • Linear scale resolution: 0.005 mm EQUIPMENT • Electro-hydraulic servo synchronization system • CNC automatic table crowning compensation • Backgauge with linear guides and ball screw • Adjustable front material supports • Quick tool clamping system • V8–V12 tooling set The upper tool is segmented into 835 mm sections, with one section additionally divided into shorter segments, providing greater flexibility when bending complex workpieces. The SPB 110T × 3200 combines advanced 4+1-axis CNC control, high positioning accuracy and quality components from recognized manufacturers, providing efficient, precise and repeatable performance for professional sheet-metal fabrication. European delivery can be arranged directly to the customer's destination at an additional cost. Please contact us with your delivery address for an individual transport quotation.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 40 t, oil tank capacity: 90 l, total length: 1,630 mm, total width: 1,020 mm, total height: 1,950 mm, overall weight: 1,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, OFFER OF THE WEEK! MTP HYDRAULIC CNC PRESS BRAKE 1320 MM / 40 T 2-AXIS X + Y – TOUCHSCREEN CONTROL Metal Technics Polska is a manufacturer and importer of professional CNC machines, laser systems and metalworking equipment. For 15 years, we have supplied reliable technologies to companies across Europe. The MTP 1320/40 hydraulic CNC press brake is a compact and efficient machine designed for accurate and repeatable sheet-metal bending. With a pressing force of 40 tonnes and a working length of 1320 mm, it is ideal for workshops and production companies looking for a practical and easy-to-operate bending solution. MTP-3212 TOUCHSCREEN CONTROL The machine is equipped with the MTP-3212 touchscreen controller and 2 controlled axes: Gjdpfx Aeyr N E Eokyekc • Y axis – ram movement / bending depth • X axis – rear back-gauge positioning Controller functions include: • Touchscreen interface • Programming of bending operations • Storage of bending programs • Manual programming • Tool parameter management • SD card memory • X-axis back-gauge positioning • Y-axis bending-depth control AMADA-PROMECAM STYLE TOOL CLAMPING The machine is equipped with an AMADA-Promecam-style manual upper tool-clamping system, allowing convenient replacement and positioning of the segmented upper tooling. SAFETY EQUIPMENT • Side safety guards • Front safety light curtains • Secured rear working area • Emergency stop system • Automatic stop when the protected safety zone is breached TECHNICAL DATA • Nominal force: 400 kN / 40 t • Working length: 1320 mm • Controlled axes: X + Y (2 axes) • Distance between columns: 900 mm • Throat depth: 180 mm • Ram stroke: 100 mm • Maximum daylight: 290 mm • Back-gauge range: 500 mm • Approach speed: 80 mm/s • Working speed: 9 mm/s • Return speed: 80 mm/s • Main motor power: 3 kW • Dimensions: 1630 × 1020 × 1950 mm (L × W × H) • Weight: 1500 kg • Controller: MTP-3212 touchscreen • Tool clamping: AMADA-Promecam style • Crowning / compensation system: Not equipped The MTP 1320/40 combines compact dimensions, simple touchscreen operation and reliable hydraulic technology. The X + Y axis configuration provides automatic back-gauge positioning and control of the bending depth, making the machine suitable for individual jobs as well as repeat production. DELIVERY Delivery can be arranged throughout Europe and beyond. Transport costs are calculated individually according to destination. Please provide your delivery address or postal code to receive a transport quotation.

Condition: used, Year of construction: 2008, 2008 Axe & Status Durma E40300 CNC Hydraulic Press Brake With Durma DU6000 Control & Assorted Press Brake Tooling Capacity 4,050 Width x 300 Tonne Bending Force. Stroke 245mm. Distance Between Columns 3,550mm. Maximum Top Tool Weight 75kg. Maximum Bottom Tool Weight 87kg. S/No. 7553083315 (2008). Gjdpfx Aksz Rw Rwjyskc With Tooling Rack With Contents Of Press Brake Tooling, Trolley With Press Brake Tooling, Sick Safety Light Guards, Foot Switch & 2 Front Arm Supports. Overall Dimensions L5,600 x W2,500 x H3,100mm. Weight 17,500kg.

Condition: excellent (used), Year of construction: 2023, power: 11 kW (14.96 HP), pressing force: 220 t, stroke length: 3,100 mm, throat depth: 650 mm, total length: 4,500 mm, total width: 2,200 mm, total height: 3,100 mm, overall weight: 16,200 kg, Press brake DURMA - AD-SERVO 30220 MACH-ID 9836 Make: DURMA Type: AD-SERVO 30220 Control: Delem DA69-T YOP: 2023 New 2023 very little working hours ! Hydraulic top and lower clamping CNC Crowning DAM Laser Measuring and Angle correction system Delem DA69-T 3D graphical controller Component Backagauge with R and Z Axis   Under power ! New EUR 120.000 Max. bending length: 3050mm Distance between column: 3100mm Max. pressing force: 220T Adjustment X-Axis back gauge:650mm Number of controlled axis: 4 Power: 11kW Length: 4500mm Width: 2200mm Height: 3100mm Weight: 16200kg Gksdpfoz Nwztjx Akysc Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: refurbished (used), Year of construction: 1993, machine/vehicle number: 20658, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 320 t, stroke length: 250 mm, operating speed: 7 mm/s, reverse speed: 70 mm/s, table width: 250 mm, table length: 4,800 mm, table height: 980 mm, throat depth: 305 mm, ram plate length: 4,500 mm, distance table to ram: 500 mm, clearance between the columns: 3,760 mm, oil tank capacity: 350 l, total length: 6,300 mm, total width: 2,300 mm, total height: 3,475 mm, overall weight: 22,500 kg, year of last overhaul: 2026, Equipment: documentation/manual, safety light barrier, Hydraulic press brake LVD PPI 320/40 S840W Year of manufacture: 1993 Year of refurbishment: 2026 Serial number: 20658 Technical specifications: Force: 3200 kN Working length: 4500 mm Distance between uprights: 3760 mm Gedjzktg Aspfx Akyokc Stroke: 250 mm Distance table – ram: 500 mm Gap: 305 mm Table width: 250 mm Approach speed: 80 mm/s Working speed: 7 mm/s Return speed: 70 mm/s Weight: 22500 kg Motor: 22 kW Oil capacity: 350 l Dimensions (L x W x H): 6300 x 2300 x 3475 mm New 2026 S840W controller • S840W: 15” touch screen – Graphic controller with free online service assistance • Axes: Y1, Y2, X, V • V: CNC crowning table • 2 front supports • Hydraulic clamping of the top tool in LVD classic 15 tool holder Tooling included: E15 H150 78° L3000mm D15 H150 78° L4500mm F15 H150 26° L4500mm H15 H150 L2500mm R15 H150 78° L4500mm V20 H130 30° L3500mm V20 H130 78° L3000mm V40 H130 78° L4500mm V60 H130 78° L4500mm V90 H130 78° L2500mm M130 Multi-V L4500mm (90/40/24/16/10)

Condition: new, Year of construction: 2026, pressing force: 220 t, Equipment: documentation/manual, safety light barrier, New, immediately available, top-spec CNC press brake YAWEI PBH220/3100-7C - Pressing force: 2200 kN Gkedozyafkjpfx Akyec - Max. bending length: 3100 mm - Year of manufacture: 2026 - CNC-controlled hydraulic crowning - Cybelec DELEM DA66 control system - WILA upper tool clamping - Controlled axes: X, R, Y1/Y2, Z1/Z2, Delta X - Servo bending aid (up to 200 kg) - 60 mm table with 13.5 mm x 22 mm slot for insert dies - 2 front support arms, adjustable on linear guides - CE compliant with Fiessler AKAS IIF (automatic height adjustment) - 24-month warranty - Commissioning and training included

Condition: defective spare-parts repository (used), Year of construction: 1997, machine/vehicle number: 885258, Defective hydraulic CNC press brake Offer 25514 Technical data: - max. working length 3060 mm - distance between uprights 2690 mm - max. pressing force 1300 kN - max. distance table / ram 370 mm - upright overhang 410 mm - ram stroke 215 mm - stroke speeds - downward speed, no load max. 200 mm/sec - upward speed 135 mm/sec - downward pressing speed 1 to 11 mm/sec - total drive power 18 kW - pneumatic connection 6 bar - space requirement approx. W 3800 x H 2400 x D 2400 mm - weight approx. 11500 kg - includes: - with 6-axis CNC control DELEM - two-hand control panel with foot switch Gkjdpfx Aox Ew Dqskyjc - crowning device - controlled back gauge with height adjustment 5 - 860 mm - hydraulic upper and lower tool clamping - die table movement pneumatically assisted - Machine does not reference because 2 axes on the right side of the back gauge are not functioning; control module may be defective.

Condition: excellent (used), Year of construction: 2009, operating hours: 8,100 h, AMADA PROMECAM MODEL HFE 5020 50 TONS CAPACITY X 2000 year 2009 specification 7 AXIS CNC HYDRAULIC DOWNSTROKING PRESS BRAKE Gsdpfx Ajzn Afvekyjkc CAPACITY 50 TONS CONTROL OP 2000 CNC NO OF AXIS SEVEN X 1 X 2,Y 1 Y 2, R 1 , Z1 & Z2 BENDING LENGTH 2000 mm OPEN HEIGHT 470 STROKE LENGTH 200 THROAT DEPTH 420 MOTOR SIZE 7.5 KW APPROACH SPEED 100 BENDING SPEED 10 RETURN SPEED 100 SERIAL NO.V090090 GUARDING MACHINE MOUNTED ERWIN SICK ELECTRONIC SIDE INTERLOCKED FENCING REAR INTERLOCKED year 2009 price POA specification

Condition: good (used), Year of construction: 2010, functionality: fully functional, operating hours: 15,996 h, input voltage: 400 V, overall weight: 6,750 kg, 1000 KN Max. stroke: 200 Weight: 6750 Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Gkjdpfstwliwox Akyoc Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV inspection on a regular basis / maintenance always carried out by Amada on a regular basis Accessories: Tool die: 2 pieces UKB 20.478 V8/12 30° 835mm 3 pieces UKB 20.344 V4/V7 88° 835mm Tool holder: 4 pieces UKB substructure for double V die 20.287 + 60.919 835mm Bending swords: 5 pieces UKB 10.261 H100 R0.6/90° 2 pieces UKB 11.158 H80 R0.6/30° 2 pieces UKB 11.200 H66 R0.8/90° Other: Light barrier in need of repair (new price approx. €4500) – separately as a replacement as an attachment (has been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to commercial customers and with exclusion of any warranty!

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total length: 3,280 mm, total width: 2,000 mm, total height: 2,700 mm, overall weight: 11,000 kg, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, PRESS BRAKE 200T × 3200 mm The press brake is used for forming sheet metal. During the slider cycle, the sheet metal can be bent to match the required geometric cross-section. The machine can be used in many industries – electromechanical industry, light industry, agricultural machinery manufacturing, shipbuilding, automotive industry, aerospace industry, etc. Machine Functions Back gauge position control Intelligent position control Recall functions Automatic reference point search Backup and restore parameters with a single identifier Fast position indexing Memory for 40 machining programs, each with 25 steps Power failure protection Technical Data Pressing force: 200 T Maximum workpiece length: 3200 mm Distance between columns: 2530 mm Throat depth: 320 mm Gjdpfx Akjyttbmsyjkc Ram stroke: 200 mm Maximum opening height: 455 mm Motor power: 11 kW Weight: 11000 kg Machine dimensions (L × W × H): 3280 × 2000 × 2700 mm Equipment Controller MTP-3212 Ball guides for back gauge Two back gauge fingers Two front supports Cylinder covers Optical light curtains (front) Safety gates (rear) Foot pedal AMADA-type punch holder Four-side lower die prism Back gauge driven by electric motor Segmented punch with possibility to remove a damaged segment Delivery Conditions The machine is brand new 12-month warranty Warranty service Post-warranty service CE declaration of conformity Operation manual in English Delivery to the customer is possible. Delivery cost according to an individual quotation from the transport company. If you are interested in other machines, we encourage you to visit our website.

Year of construction: 1991, condition: ready for operation (used), Hydraulic CNC press brake EHT for sale. Press force: 1100kN, bending length: 3050mm, min./max. table-ram distance: 280mm/600mm, rapid approach speed: 100mm/s, working speed: 2mm/s-8mm/s, return speed: 100mm/s, backgauge adjustment range: 5-1000mm, backgauge adjustment speed: 200mm/s, backgauge vertical adjustment: +/-10mm, safety distance between tooling and operating elements: 120mm, stopping time: 75ms, stopping distance: 11mm, Control system: DAK 90. Machine weight: 8500kg. Documentation available. Inspection by appointment possible. Gksdpfjzkvk Djx Akyoc

Condition: new, Year of construction: 2026, machine/vehicle number: PB11032, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 380 V, input current: 25 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 110 t, stroke length: 250 mm, operating speed: 10 mm/s, reverse speed: 150 mm/s, table width: 300 mm, table length: 3,200 mm, table height: 850 mm, throat depth: 400 mm, ram plate width: 1,700 mm, ram plate length: 3,200 mm, distance table to ram: 2,700 mm, clearance between the columns: 2,600 mm, oil tank capacity: 400 l, total length: 3,500 mm, total width: 1,900 mm, total height: 2,600 mm, overall weight: 8,000 kg, Equipment: CE marking, safety light barrier, European technician service, installation, training No. Name Parameter Unit 1 Nominal force 1100 KN 2 Worktable length 3200 mm 3 Worktable height 850 mm 4 Distance between vertical 2600 mm 5 Stroke 200 mm Dsc Arxfey U Hmgem Iswa 6 Equipping die height 500 mm 7 Throat depth 400 mm 8 Control axes 8+1Axes Y1, Y2, X1, X2, R1, R2, Z1, Z2+V 9 Y axis working speed Quick down 160 mm/s Working 10 mm/s Return 150 mm/s 10 Y axis repeat position accuracy ±0.01 mm 11 Main servo motor Power 18 KW Brand INOVANCE Speed 1500r/min 12 Work piece Precision Straightness 0.3 mm/m Angle ±30’ /m 13 Back gauge X axis Stroke 600 mm Max. speed 200 mm/s Repeat position accuracy ±0.02 mm 14 Back gauge R axis Stroke 200 mm Max. speed 150 mm/s Repeat position accuracy ±0.05 mm 15 Dimension (Approximate) Length 4000 mm Width 1900 mm Height 2600 mm 16 Weight(Approximate) 10500 Kg No. Parts Name Brand Brand Location Remarks 1 Main servo motor INOVANCE China Gsdpez H Skvefx Akyekc 2 Servo motor and drive INOVANCE China 3 Main Electrics Schneider France 4 Oil Cylinder HEYAN China TOP BRAND 5 Seal ring NOK Japan 6 Hydraulic valve & Filter Rexroth BOSCH Germany 7 Pump Hawe Germany 8 Controller DA66T Netherlands 9 Toolings Cnstamp 10 Ball screw Hiwin China Taiwan 11 Guide rail Hiwin China Taiwan 12 Grating ruler GIVI ITALY 13 Footswitch Enchi China 14 Stop finger with linear guide YES 15 Crowing table Motorized 16 Front laser protection LNTECH CE standard 17 Side and Back doors with limit switch Schneider CE standard

Year of construction: 1995, condition: ready for operation (used), A Promecam (Amada) APX 103 CNC press brake is available. Pressing force: 1000kN, working width: 3000mm, column distance: 2550mm, gap opening: 370mm, stroke: 100mm, column depth: 400mm, infeed speed: 70mm/s, bending speed: 9mm/s, return speed: 85mm/s, drive power: 10.5kW. Machine dimensions X/Y/Z: approx. 3500mm/2200mm/2300mm, weight: approx. 6400kg, control: Amada Operator, operating hours: 36261h. The press is still in operation, therefore the operating hours change continuously. Documentation available. On-site inspection is possible. Gjdpewm Nn Rofx Akyjkc

Condition: excellent (used), Year of construction: 1993, AMADA MODEL ITS2 50-20 50 TONS X 2000 HYDRAULIC UP STROKING 5 AXIS CNC PRESS BRAKE COMPLETE WITH OPERATEUR 1 4 AXIS CNC CONTROL Erwin Sick machine mounted electronic guards , side and rear interlocked fencing year 1993 description TYPE HYDRAULIC UPSTROKING BENDING PRESSURE 50 TONS BENDING LENGTH 2000 OPEN HEIGHT 370 STROKE LENGTH 100 THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 4 AXIS CONFIGURATIONS X1-X YI-Y2 RI-R2 BACKGUAGE Gsdpfx Aspygydjkyekc can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: new, pressing force: 135 t, operating speed: 10 mm/s, reverse speed: 130 mm/s, table height: 940 mm, overall weight: 7,750 kg, MVD SERIES B - 3,100x135Tn SERIES B - 4 Axes Large press brake for achieving outstanding bends and flawless workpieces The body and upper beam are of steel construction, designed according to minimum and optimum strength criteria. Model: B135/3100 Bending force: 135 tons Bending length: 3100 mm Distance between uprights: 2600 mm Ram stroke: 260 mm Daylight: 465 mm Throat depth: 410 mm Table height: 940 mm Length x Width x Height: 4690 x 2340 x 2980 mm Approach speed: 210 mm/s Return speed: 130 mm/s Bending speed: 10 mm/s Oil tank capacity: 180L Main motor: 11 kW Weight: 7,750 kg Standard features: CNC 3 axes Y1, Y2, X 260 mm stroke, 410 mm throat depth ESA S630 CNC control unit ± 0.03 mm precision SERVO-driven, motorized rear gauge X = 750 mm Promecam quick-release punch holder Sliding front sheet support arms Special narrow bottom table by MVD (European type) GIVI optical linear scales Standard punch tooling (H: 67, 850 R:08) Godpexfzpzjfx Akyskc Standard die tooling (60x60 mm, 4 Vee V=16-22-35-50 mm, 85°, H:60) LED lighting in RAM Optional features: Choice of X-axis backgauge options with 2-4-6-8 stops Wide bottom table for Multi Vee forming dies Anti-deflection crowning with original Wila wedges AKAS or DSP front laser safety systems Additional backgauge fingers Front laser safety

Condition: like new (used), Year of construction: 2020, Like-new press brake from Ermak / Ermaksan Type: Power-Bend Pro 3100 135 Capacity: 3100 x 135 tons Delem DA56s CNC control Gjdpfjzunlhsx Akyjkc Y1, Y2, and X axes CNC controlled Akas Fiessler laser safety system Amada/Euro clamping system Manual crowning Includes a set of tooling

Year of construction: 1992, condition: good (used), machine/vehicle number: 03.323.36002, Item No. 22621 Technical Data: - Max. working length 3500 mm - Distance between columns 3050 mm - Max. pressing force 2000 kN - Distance table / ram max. 480 mm Gkjdpfx Aksip Nikoysc - Column overhang 260 mm - Ram stroke approx. 300 mm - Stroke speeds - Downward speed, no load max. 100 mm/sec - Upward speed 80 mm/sec - Downward pressing speed max. 10 mm/sec - Total drive power 25 kW - Space requirement approx. W 4500 x H 3150 x D 2100 mm - Weight approx. 16000 kg - including: - CNC control CYBELEC, renewed in 2008 - Controlled crowning device - Controlled rear backstop with height adjustment 5 - 1000 mm - Hydraulic tool clamping - Upper tool + universal die set - Material supports - Two-hand control panel

Condition: ready for operation (used), Year of construction: 2008, Pressing force: 3200kN, enlarged stroke: 810mm, working width: 4050mm, ram speed: downwards: 130mm/s, pressing: 6.5mm/s, upwards: 75mm, stop time: 109ms, safety distance: 174mm, weight: approx. 29000kg, operating hours: 16010h, control: Cybelec ModEva 15S. Including 4 bending aids and angle measuring sensor. Dies, embossing tools, pointed punches, roe foot punches, closing bar, extension for upper tool, radius tool and adapter available on request. Documentation available. Gsdpfx Akowxb Igeyekc

Condition: used, Safan 120-4300 TS-1 CNC Pressbrake Year 2004 Pressing Force 120 Ton Bending Length 4,300 mm Distance between Uprights 3,600 – 3,700 mm Maximum Stroke 180 mm Open Height (Table to Ram) 510 mm Gksdpfxezdgnbs Akyoc Throat Depth 400 mm Table Width 160 mm Main Motor Power 7.5 kW Control System Safan TS-1 CNC Number of Controlled Axes Typically 4 Axis (Y1, Y2, X, R) Electrical Supply 400V / 3 Phase Machine Weight Approx. 11,700 – 12,300 kg Machine Dimensions (L × W × H) Approx. 4,500 × 1,650 × 2,900 mm

Condition: excellent (used), functionality: fully functional, Pressure: 130 t Bending length: 3150 mm Gksdpfxeyvh Dvj Akyjc Distance between uprights: 2600 mm Motor power: 15 kW Control: CYBELEC VisiTouch Machine weight approx.: 10,900 kg Space requirement approx.: 3990x1750x2900 mm Equipment: - Controlled axes: Y1, Y2, X, R, Z1, Z2, X1 - Fully dynamic hydraulic crowning

Condition: excellent (used), Year of construction: 2009, Pressing force: 75 tons Bending length: 2,000 mm Gkjdpfez I Sytox Akyjc CNC operating hours: 77 hours 53 minutes EASYBEND 2DT control system (newly installed) Includes tools.

Condition: used, Zschokke HAP 063a - 4/6 - Hydraulic press brake - Year of manufacture: 1967 Technical data - Max. bending force: 630 t - Max. oil pressure: 400 bar - Distance between uprights: 4100 mm - Max. bending length: 6000 mm - Overhang: 375 mm - Stroke (adjustable): 0 - 500 mm - Distance between tool clamping surfaces: 300 - 800 mm Hydraulic pumps: - Main pumps: 2 x 22 kW - Delivery rate at idle: 2 x 153 l/min - Delivery rate at full load: 2 x 33 l/min - Control pump: 0.75 kW Installation: - Footprint (W x D): 6960 x 3250 mm - Height above ground: 4100 mm Gkjdpfjzf Hniox Akysc - Undercarriage, front: 2200 mm - Undercarriage, rear: 600 mm - Operating voltage: 3 x 400 V / 50 Hz - Machine weight: 51000 kg

Condition: used, Year of construction: 1976, total length: 2,100 mm, total width: 1,100 mm, total height: 3,200 mm, Colour: Green Empty weight: 6.000 kg - Year: 1976 Gedpjz R Ehwefx Akyokc - Documentation available: Yes - Serial number: 8753 - Drive system: Conventional - Press model: C-Frame press - Press configuration: Single-acting - Press force [ton]: 63 - Max. stroke [mm]: 560 - Table length [mm]: 640 - Table width [mm]: 640 - Ram length [mm]: 555 - Ram width [mm]: 555 - Max. opening height [mm]: 350 - Transport dimensions: 2100mm x 1100mm x 3200mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum