Used Hydraulic Cnc Press Brake for sale (42,948)

Year of construction: 1989, condition: ready for operation (used), A Darley CNC press brake is available. Pressing force: 2000kN, working width: 5200mm, power: 15kW, oil capacity: 160l, machine dimensions X/Y/Z: approx. 5500mm/1900mm/3100mm, weight: approx. 20000kg. Including tools and accessories. Documentation available. On-site inspection is possible. Hjdjvf Ixyopfx Ahvoni

Condition: ready for operation (used), Year of construction: 1992, Compressive force: 1000kN/100t, ram stroke: 200mm, max. operating pressure: 290bar, control: DNC70, safety distance: 166mm, overtravel time: 104ms, overtravel distance: 7mm. Hedpfx Ajwcz Axshvoni

Year of construction: 2000, condition: ready for operation (used), Working width: 2500mm, max. sheet thickness aluminium/steel/stainless steel: 3mm/2mm/1.25mm, feeding length range: 575mm-2500mm, feeding width range: 210mm-1500mm, max. bending height: 200mm, max. negative bend: 35mm, max. diagonal twist: 3300mm, rotary table position: 0°/90°/180°/270°, working height: 1150mm. Clamping stroke: 210mm, clamping force: 240kN, clamping lowering and return speed: 50mm/s, upper beam swivel range: 135°, upper beam swivel speed: 90°/s, lower beam swivel range: 135°, lower beam swivel speed: 90°/s. Machine dimensions X/Y/Z: approx. 4050mm/1600mm/2400mm, weight: approx. 13000kg. Documentation available. An on-site inspection is possible. Hjdpfx Ahjw N Shksveni

Condition: ready for operation (used), Year of construction: 1997, Press force: 1700kN, bending length: 4000mm, stroke: 215mm, installation height: 365mm, passage width: 3680mm, throat depth: 410mm, feed speed: 200mm/s, bending speed: 1-10mm/s, retraction rate: 135mm/s, working height: 1050mm, control: Delem. Including spare parts and accessories. Documentation available. Hnjdpfxetqfqio Ahvei

Year of construction: 2007, condition: ready for operation (used), A Beyeler press brake, today Bystronic, is available. Working length: 4100mm, press force: 2250kN, max. stroke: 400mm, throat depth: 250mm, installation height: 917mm, rapid traverse down/up: 150mm/s, working speed: 10mm/s, hydraulic pressure: 315bar, oil volume: 815l, max. oil temperature: 65°C, power: 30kW, max. upper tool weight: 400kg, max. workpiece weight: 13kg. Machine dimensions X/Y/Z: approx. 5500mm/2300mm/3350mm, weight: approx. 22000kg, operating hours: approx. 35000h. Including numerous upper tools, blades and lower tools. Documentation available. On-site inspection is possible. Hnsdpfex U Dwpex Ahvsi

Year of construction: 1995, condition: ready for operation (used), Pressing force: 200t/2000kN, bending length: 3550mm, upright distance: 3050mm, upright projection: 350mm, max. ram stroke: 200mm, max. ram-to-table distance: 540mm. Dimensions X/Y/Z: approx. 4400mm/2100mm/3200mm, weight: approx. 16000kg, control: Cybelec DNC 800. Including a matrix, 2x upper tool (30°/60°) and a new light barrier. Documentation available. On-site inspection is possible. Hedpotva Dnsfx Ahvjni

Year of construction: 1998, condition: ready for operation (used), Pressing force: 2000kN, working width: 3100mm, column passage: 3240mm, max. stroke: 400mm, throat depth: 250mm, max. installation height: 965mm, NC axes: 11, hydraulic volume: 550l, machine dimensions X/Y: approx. 4400mm/3400mm, weight: approx. 16600kg, control: Cyb-Tech Infinitron. Documentation available. On-site inspection is possible. Hedpewhp Ndsfx Ahvsni

Year of construction: 1996, condition: ready for operation (used), Pressing force: 1200kN, working width: 4100mm, stand distance: 3550mm, table width: 215mm, throat depth: 400mm, stroke: 800mm, working speed: 80mm/s, power: 11kW, weight: approx. 12000kg. An on-site inspection is possible. Hjdpfxoumwh Ne Ahveni

Year of construction: 2010, condition: ready for operation (used), A CNC sheet bending machine Amada is available. Working width: 4000mm, pressing force: 2200kN, stroke: 350mm, axes: 8. Machine dimensions X/Y/Z: approx. 5600mm/2650mm/3300mm, weight: approx. 18000kg, control: Amada. An on-site inspection is possible. Hedpfjxv A E Sox Ahvoni

Condition: ready for operation (used), Pressing force: 440kN, working width: 1600mm, cylinder stroke: 150mm, travel X/R: 400mm/200mm, adjustment speed R-axis: 200mm/s, installation height: 400mm, throat depth: 200mm, machine stand distance: 1530mm, motor power: 7.5kW, weight: approx. 2100kg. Including various accessories and tools. Documentation available. On-site inspection is possible. Hodpju N Hc Nsfx Ahvoni

Condition: ready for operation (used), Year of construction: 2008, Pressing force: 3200kN, enlarged stroke: 810mm, working width: 4050mm, ram speed: downwards: 130mm/s, pressing: 6.5mm/s, upwards: 75mm, stop time: 109ms, safety distance: 174mm, weight: approx. 29000kg, operating hours: 16010h, control: Cybelec ModEva 15S. Including 4 bending aids and angle measuring sensor. Dies, embossing tools, pointed punches, roe foot punches, closing bar, extension for upper tool, radius tool and adapter available on request. Documentation available. Hjdpjwxb Igofx Ahvjni

Year of construction: 1978, condition: ready for operation (used), An oil-hydraulic press brake built in 1978 is offered, max. pressing force: 2000kN, max. stroke: 250mm, max. operating pressure: 295bar. Control panel defective. Viewing is possible by arrangement. Hnsdpfx Ajx Aunfjhvei

Year of construction: 1995, condition: ready for operation (used), A Promecam (Amada) APX 103 CNC press brake is available. Pressing force: 1000kN, working width: 3000mm, column distance: 2550mm, gap opening: 370mm, stroke: 100mm, column depth: 400mm, infeed speed: 70mm/s, bending speed: 9mm/s, return speed: 85mm/s, drive power: 10.5kW. Machine dimensions X/Y/Z: approx. 3500mm/2200mm/2300mm, weight: approx. 6400kg, control: Amada Operator, operating hours: 36261h. The press is still in operation, therefore the operating hours change continuously. Documentation available. On-site inspection is possible. Hodpfxjwm Nn Re Ahvjni

Condition: used, Year of construction: 1986, - incl. various bending tools - year of manufacture: 1986 Specifications - Capacity: 800 kN - Bending length: 2550 mm - Throat depth: 250 mm - Passage: 2050 mm - Stroke: 140 mm - Stopping time: 140 ms - Backgauge travel: 600 mm - Operating pressure: 300 bar - Motor power: 5.5 kW - Operating voltage: 400 V - Dimensions (W x H x D): approx. 3400 x 2600 x 1300 mm Hodpfx Ahsxdc A Hjveni - Weight: 4800 kg

Condition: new, Year of construction: 2026, control type: CNC control, KBA - Combined CNC-controlled press brake / guillotine shear Super-compact machine with a very small footprint. Maximum cutting length: 3,020 mm or 2,020 mm Rated cutting capacity: 6 mm steel sheet / ST 40 Hsdpfxjyhzlts Ahvjni Cutting angle: 1°30″ Backgauge for the shear station – adjustment range: 750 mm Table height: 750 mm Maximum bending length between side frames: 3,550 mm or 2,505 mm Maximum pressing force: 1,000 kN Working height for bending: only 1,230 mm Stroke range (bending station): 175 mm Maximum installation height (bending station): 350 mm Backgauge adjustment range (bending station): 750 mm Dimensions including operator’s pendant: 4.25 or 3.25 m x 1.82 m x H 2.8 m Required floor space: 3.85 or 2.85 x 1.82 m Drive power: 10 kW Weight: 9,000 kg or 7,500 kg Equipment: - CNC control with touchscreen and 10” colour display, graphical user interface, and automatic bending angle calculation - 1 set of press brake tools (bending punch + four-way reversible die) - Sheet metal supports for the press brake station - 90° angle stop for the guillotine shear with 1 m length - Bending station working area safeguarding via light barriers, rear area safeguarded by lateral safety guards and light barriers Optional: - Front bending area guarding by PILZ® camera monitoring - Rotatable angle stop

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Serial No. Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Frame gap: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm (travel) Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working speed: 1-10 mm/s Y return speed: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Hnsdpsya Iaqjfx Ahvji Power supply: 400 Volt, 50 Hz, 50 Amp. - 8-axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, movable laterally (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 stop positions up to max. 1080 mm - Press beam with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light curtain - Operation via electric foot switch and/or two-hand control panel - Hydraulic clamping for the upper tool (TRUMPF system) with 20 mm clamping groove - Tool holder for the lower tool, height 160 mm x width 60 mm, with locating groove 14 x 23 mm - Tool system TRUMPF, supplied without tools Space requirements (L x W x H): 0 x 2500 x 3400 mm Transport height of the machine: 3360 mm Weight: 17,000 kg Good condition

Condition: good (used), Year of construction: 2010, Press force: max. 1200 kN; Stroke: max. 52 mm; Dimensions (W x L x H): 4610 x 3910 x 2665 mm; Total weight (net): approx. 7000 kg Hedpfjyaqgajx Ahvjni

Condition: new, Year of construction: 2025, sheet thickness - max. 8 mm pressure 200 t chamfer lenght 3200 mm engine output 15 kW Hnodpfx Ahsxf Na Ujvei return speed 105 mm/min working feed 9 mm/sec x-travel 600 mm Max. opening height 570 mm control DELEM DA53T GERD WOLFF KANTO 200T CNC Electro-Hydraulic Press Brake CNC axis accuracy 1) Machine sliders (Y1, Y2) – synchronisation precision: The slider movement axes control the bending depth and bending angle. The system consists of the control unit, two glass scales (Y1, Y2) installed on the work table, electro-hydraulic proportional valves and an amplifier. A closed control loop detects and controls the relative position of the slide and table as well as the speed and position of the slide. This ensures the synchronisation of the slide and maintains the bending depth and angle with high precision. Positioning accuracy: ±0.02 mm Repeatability: ±0.02 mm 2) Machine backgauge (X axis): The forward/backward movement of the X-axis controls the dimensions of the sheet metal cut. The stop bar is driven by a servo motor and moves the crossbeam via a ball screw and linear guide. Operation is stable and precise. Positioning accuracy: ±0.10 mm Repeatability: ±0.03 mm 3) Mechanical compensation system (V axis): The pull plate of the mechanical compensation is moved by a motor so that the compensation points are formed in an arc shape. The points perfectly compensate for the elastic deformation of the work table and slide to ensure angular constancy and straightness of the workpiece. Position sensors and CNC control ensure precise regulation.

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Working length 2550 mm Hsdpfjxpqy Djx Ahvjni Stroke 215 mm Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Table height above floor 950 mm Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) - Total recorded operating hours = 8,120 h - Work strokes 1,049,789 Space requirement (L x W x H): 3450 x 1850 x 2650 mm Weight 5,000 kg Good condition

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Hnjdpfx Aow Iq Ugohvsi Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: new, functionality: fully functional, Year of construction: 2025, pressing force: 180 t, Pressure: 180 t Bending length: 3100 mm Frame width: 3100 mm Control: Cybelec CybTouch 15 Stroke: 250 mm Installation height: 470 mm Rapid approach (down): 180 mm/s Bending speed: 0-10 mm/s Rapid return (up): 165 mm/s Total power requirement: 15 kW Machine weight approx.: 14,000 kg Dimensions: 4255 x 2390 x 3030 mm Standard equipment: - CNC control Cybelec CybTouch 15 Windows - 4 + 1 axes: Y1, Y2, X, R, C - Mechanical crowning system: B-CM - Backgauge system mod. GHP-2 - Servo-driven main motor - Safety system: DSP AP+MCS Hedpfx Ahewz Et Sevsni Additional equipment: - 2 x front support tables - 2 x stop fingers - Hydraulic upper tool clamping Wila Style - Hydraulic die clamping Wila Style - CE standard norm

Condition: used, Year of construction: 2004, machine/vehicle number: P020504, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Delem, controller model: DA-66W, bending force (max.): 130 t, working width: 3,150 mm, stroke length: 350 mm, throat depth: 500 mm, distance between stands: 2,600 mm, installation height: 550 mm, operating speed: 10 mm/s, reverse speed: 115 mm/s, number of axes: 6, table height: 950 mm, type of crowning: CNC-controlled, oil tank capacity: 160 l, travel distance X-axis: 500 mm, back gauge adjustment: CNC-controlled, back gauge speed R-axis: 100 mm/s, back gauge travel distance R-axis: 160 mm, overall weight: 13,500 kg, total length: 2,300 mm, total width: 4,000 mm, total height: 3,100 mm, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, lower tooling, safety light barrier, upper tooling, Offered machine: Used CNC hydraulic press brake Manufacturer: CR Electronic Model: GOLD 130/31 Year of manufacture: 2004 Control: Delem DA-66W (8-axis capable) Condition: used, fully functional (Z axes currently not operational, see details below) Technical Specifications: - Pressing force: 1,300 kN (130 t) - Bending length: 3,100 mm - Distance between uprights: 2,600 mm - CNC-controlled axes: Y1, Y2, X, R, Z1, Z2 (Note: Z1 and Z2 are currently electronically non-operational – new servo drives required. Manual adjustment possible.) - Stroke: 350 mm - Install height: 550 mm - Throat depth: 500 mm - Backgauge (X): 600 mm - Table height: 950 mm - Working speed: 10 mm/s - Return speed: 115 mm/s - Motor power: 11 kW - Operating pressure: 275 bar - Weight: approx. 13,500 kg Equipment & Features: - CNC-controlled hydraulic crowning - Quick-change system tool holders top & bottom - Manual quick-clamping of top tools - Laser optical finger guard (safety light curtain) - PLC-based diagnostic system - 2 support arms with quick adjustment - Operating manuals available - CE compliant Included accessories: - Fully equipped tool cabinet - Top tool 88°, full bending length - Top tool 35°, full bending length - Top radius bending tool - V8 T-die, full bending length Hnedpfxjw A Rgge Ahvoi - V12 T-die, full bending length - Flattening die, approx. 2,000 mm length Condition / Remarks: - The machine is well-maintained, currently connected - Inspection and trial run under power possible onsite - Z1/Z2 currently not functional – new servo controllers required - The machine is being sold due to a planned modernization and replacement by a new press brake.

Condition: excellent (used), Year of construction: 2007, Synchronized hydraulic press brake MECOS Mod. Syncro 200/4000. Numerco ESA KVARA control. NR.07 Controlled axes (Y1-Y2-X-R-Z1-Z1-Z1) WILA automatic compensation table. Hsdpfx Ahov S Ad Reveni Pneumatic tool attachment: Type Promecam, Tecnostamp H=150 mm. Useful bending length: mm 4050. Power exerted: Ton 200. Front safety devices: DSP LASER. Weight: kg 24,000.

Condition: new, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, bending force (max.): 220 t, working width: 4,100 mm, stroke length: 310 mm, throat depth: 410 mm, distance between stands: 3,600 mm, operating speed: 10 mm/s, reverse speed: 140 mm/s, number of axes: 4, table height: 965 mm, type of crowning: motor-driven, back gauge adjustment: CNC-controlled, power: 18.5 kW (25.15 HP), STANDARD FEATURES CNC-controlled hydraulic press brake CNC control of Y1 – Y2 – X – R axes (4 axes) CNC control unit (ESA S640 – 15” touchscreen, 2D graphic display) Offline PC programming capability Stress-relieved, heavy-duty steel frame CNC-controlled synchronized cylinder system 310 mm stroke 410 mm throat depth ±0.03 mm precision servo-motorized back gauge Back gauge travel distance: X axis: 750 mm R axis: 250 mm Back gauge system with ball screw spindles and linear guides Sliding type front support arms Manual crowning system (wedge type) Narrow European-style lower table European-style quick-release upper tool clamping system (Promecam type) High-precision linear encoders Standard upper punch (H: 67 mm – 85° – R: 0.8) Standard lower die (60×60 mm – 4 grooves V: 16 / 22 / 35 / 50 mm) Front safety system with laser beam Hnjdpox Nqqrsfx Ahvei LED lighting Foot pedal Emergency stop buttons Safety equipment compliant with CE standards OPTIONAL FEATURES 4 / 6 / 8-axis back gauge systems starting from X + R Extension of the X-axis back gauge travel up to 1000 mm Additional back gauge fingers Hydraulic upper and lower tool clamping systems Motorized crowning system Wide lower table for multi-groove dies Front safety laser system (AKAS or DSP) Rear safety light barrier CNC-controlled sheet metal front support systems Automatic angle measurement system Oil cooler or oil heater Electrical cabinet with air-conditioned cooling system Deep throat option TECHNICAL SPECIFICATIONS (C 220 / 4100 MODEL) Bending force: 220 tons Bending length: 4100 mm Distance between side frames: 3600 mm Stroke: 310 mm Open height (distance between lower and upper dies): 515 mm Throat depth: 410 mm Table height: 965 mm Back gauge axes: X = 750 mm / R = 250 mm Approach speed: 180 mm/sec Working speed: 140 mm/sec Return speed: 10 mm/sec Main motor power: 18.5 kW Oil tank capacity: 290 liters Machine weight: ~13,650 kg Machine dimensions (LxWxH): approx. 6180 x 2650 x 3040 mm

Condition: new, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, bending force (max.): 400 t, working width: 4,100 mm, stroke length: 310 mm, throat depth: 510 mm, distance between stands: 3,600 mm, operating speed: 8 mm/s, reverse speed: 80 mm/s, number of axes: 4, table height: 985 mm, type of crowning: motor-driven, back gauge adjustment: CNC-controlled, power: 30 kW (40.79 HP), Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm Stroke, 510 mm Throat Depth • ESA S650 CNC Control Unit • Servo-driven backgauge with ±0.03 mm accuracy, X=750 mm, R=250 mm • European type Promekam quick die clamping system • Sliding front support system • Manual crowning system (Original WILA wedge-type) • Narrow lower beam (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower tool (60x60 mm, 4-way V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • Rear backgauge options from X+R up to 4-6-8 axes • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide lower beam for multi-vee die • Backgauge X-axis distance 1000 mm • AKAS or DSP front laser safety system • Additional backgauge fingers • Additional backgauge stops TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 400 Bending Length (mm) 4100 Distance Between Side Frames (mm) 3600 Stroke (mm) 310 Daylight Opening (mm) 535 Throat Depth (mm) 510 Table Height (mm) 985 Approach Speed (mm/s) 100 Return Speed (mm/s) 80 Pressing Speed (mm/s) 8 Oil Tank Capacity (L) 400 Machine Weight (kg) 22500 Main Motor Power (kW) 30 Hjdpfxox Npale Ahvsni CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 Axes) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA wedge-type) Safety System Front laser safety Origin Turkey