Used Horizontal Wrapping Machine for sale (65,815)

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: S135686, Wrapping Machine MYTHO EASY Semi-automatic wrapping machine with a full turntable Articulated column mounting for easy and quick assembly and disassembly The machine can be relocated using a forklift Photoelectric sensor for pallet height detection Acoustic signal for start and end of wrapping cycle Mode selector: manual – automatic Emergency central stop button Digital control panel with adjustable wrapping parameters for selection of wrapping cycles (wrap up and down, only up, only down, hermetic sealing of pallets, manual cycle) Kedpfx Ahjyb Rtis Nsll Adjustable number of wraps up and down Soft start with adjustable turntable speed (frequency inverter) Adjustable carriage speed for film carriage (can be set differently for ascent and descent) Adjustable film tension (can be set differently for ascent and descent) Adjustable pre-stretch percentage (on PS carriage, can be set differently for ascent and descent) Photocell reading delay Pressing unit on/off (accessory) Film cutting device on/off (accessory) 4 film tensioning/pre-stretching methods: - FM – mechanical film tensioning clutch adjustable on the film carriage - FE – electromagnetic film tensioning clutch adjustable on the control panel - PRS – powered pre-stretch (1 motor) adjustable on the control panel with standard 200% pre-stretch (option to change gears for 150% or 250% pre-stretch), system designed for fast and easy film replacement TECHNICAL DATA: Turntable diameter: 1500 mm Maximum turntable load: 2000 kg Adjustable turntable speed: 3–12 rpm Max. pallet size (standard platform): 1000 x 1200 x 2500 mm Platform height: 7 cm Supply voltage: 230 V – 50 Hz Max film roll width/diameter: 500 / 300 mm

Year of construction: 2004, condition: good (used), functionality: fully functional, Wrapping machine Manufacturer: Böhl Model: BSB-45 SX-2 Year: 2004 Total connected load: 2.5 kW Product dimensions: Width: 5-250 mm Height: 5-250 mm Klsdpfx Asybbhqeh Njl Length: 600-6000 mm Machine weight: 950 kg with roller tables

Condition: excellent (used), Year of construction: 1980, Horizontal gear hobbing and threading machine for gears, splined shafts, worm screws, threads, and pinions up to 5 meters in length, complete with 3 milling heads models APFW, APGS, APG, set of gears, various steadies, and indexing device. Kljdpfxjyba Rwe Ah Nel

Condition: used, Year of construction: 2015, x-travel 560 mm y-travel 560 mm z-travel 660 mm Control M 730 BM MAPPS IV distance spindle center to table 80 - 640 mm distance Spindlenose and center of table 70 - 730 mm max. spindle speed 12.000 min/-1 power capacity - main spindel 15 / 11 kW tool taper SK 40 spindle diameter in front bearing 80 mm numbers of pallets 2 pos. work height max. 1.050 mm Klodpfex Hpytex Ah Njl size of pallet 400 x 400 mm max. workpiece weight 400 kg max. workpiecediameter 630 mm Max. workpiece - hight 900 mm B-Axis 0,001 ° Indexing-time 90° 1,3 sec change time of pallets 8,0 sec number of toolpositions 60 pos. tool taper SK 40 max. tool diameter 70 mm max. tool-dia with free toolbox 170 mm max. tool length 450 mm max. tool weight 8 kg change-time tool to tool 0,9 sec change-time chip to chip 2,8 - max. 9,9 sec feed speeds max. 60.000 mm/min rapid traverse ( X / Y / Z ) 60 m/min total power requirement 35 kVA weight of the machine ca. 7,9 t dimensions of the machine ca. 5,5 x 3,5 x 2,6 m CNC - MachiningCenter Horizontal MORI SEIKI - NHX 4000 - pallet-changer - WITHOUT clamping towers

Condition: used, Year of construction: 2015, x-travel 560 mm y-travel 560 mm z-travel 660 mm Control M 730 BM MAPPS IV distance spindle center to table 80 - 640 mm distance Spindlenose and center of table 70 - 730 mm max. spindle speed 12.000 min/-1 power capacity - main spindel 15 / 11 kW tool taper SK 40 spindle diameter in front bearing 80 mm numbers of pallets 2 pos. work height max. 1.050 mm size of pallet 400 x 400 mm max. workpiece weight 400 kg max. workpiecediameter 630 mm Max. workpiece - hight 900 mm B-Axis 0,001 ° Indexing-time 90° 1,3 sec change time of pallets 8,0 sec number of toolpositions 60 pos. tool taper SK 40 max. tool diameter 70 mm max. tool-dia with free toolbox 170 mm max. tool length 450 mm max. tool weight 8 kg change-time tool to tool 0,9 sec change-time chip to chip 2,8 - max. 9,9 sec feed speeds max. 60.000 mm/min rapid traverse ( X / Y / Z ) 60 m/min total power requirement 35 kVA weight of the machine ca. 7,9 t dimensions of the machine ca. 5,5 x 3,5 x 2,6 m CNC - MachiningCenter Horizontal MORI SEIKI - NHX 4000 - pallet-changer Kledpfx Aox Hpymeh Nel - WITHOUT clamping towers

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 650 mm, controller model: Siemens 840 D, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 500 mm Travel Z-axis: 650 mm B-axis: 360,000 x 0.001 mm Pallet size: 400 x 500 mm Spindle speed: 50 – 10,000 rpm Tool holding system: SK 40 Number of tools in magazine: 60 Rapid traverse: 40 m/min Feed rate: 1 – 20,000 mm/min Kljdpfeya Ed Hjx Ah Nsl MACHINE DETAILS Control system: Siemens 840 D Power requirement: 65 kW

Condition: used, Year of construction: 2004, Back Coating Line Laminating Machine FRIZ, type Profi FBS 130, year 2004 Kodjyay Rujpfx Ah Nell

Condition: used, Year of construction: 2022, Price: On request Kedpfx Aox Tt Unoh Nell What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2022 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 30B.11.040.22 - Type milling table: Beam table - Tool clamping system: HSK-F63 - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 4 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - Working range X [mm]: 3300 - Working range Y [mm]: 1280 - Z-axis working range [mm]: 250 - X-axis maximum stroke [mm]: 4000 - Y-axis maximum stroke [mm]: 1670 - Z-axis maximum stroke [mm]: 500 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2000, grinding length 600 mm grinding width 300 mm magnetic clamping plate 600x250 mm wheel diameter 220-300 mm Klodpfjw Hg Uzsx Ah Nsl weight 2200 kg

Condition: used, Year of construction: 2018, - Year: 2018 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - Type milling table: Beam table - Drilling unit present: Yes - Tool changer positions [pcs.]: 1 Kjdpfx Aextbgpjh Nsll Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2004, operating hours: 19,357 h, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: Siemens 810 D, total length: 6,500 mm, total width: 3,500 mm, overall weight: 9,000 kg, spindle speed (max.): 9,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a 4-axis vertical machining center from Unisign, model Univers 4, year of manufacture 2004. The machine is used but in good condition, fully functional, and has been regularly maintained. Special feature: second milling spindle (replacement spindle included). Operating hours: 19,357 Technical Data -Traverse paths: X = 1600 mm / Y = 400 mm / Z = 400 mm -B axis: A axis (360° x 0.001°) 20 rpm -Spindle speed: 0 – 9000 rpm -Control: Siemens Sinumerik 810D -Table size: 1 bridge with 4 sides, L 1800 mm, 4 x 113 mm -Table load capacity: approx. 150 kg -Working feed rate: 5 – 28,000 mm/min -Rapid traverse (X/Y/Z): 28,000 mm/min Tool & Magazine -Tool holder: DIN 69871-SK40 -Chain magazine with 44 stations -Tool diameter: approx. 70 mm (up to 200 mm with free adjacent slots) -Max. tool length: approx. 240 mm -Max. tool weight: 5 kg -Max. total weight of tool magazine: approx. 200 kg -Tool change time: approx. 8 sec Machine Requirements & Dimensions -Total power requirement: 14 kW -Machine weight: approx. 9000 kg -Footprint (LxW): approx. 6.5 x 3.5 m Equipment & Accessories -Coolant system (approx. 480 L, internal & external emulsion) Kljdpsx Iputofx Ah Nel -Clefil RBF-E100 20 bar pump unit -Chip conveyor -Rinse gun in machining area -Hydraulic/pneumatic clamping options in machining area -Enclosed work area cover in accordance with safety regulations (UVV) -Röhmheld hydraulic aggregate (max. 500 bar) -Automatic probe RWP20.00 -Various SK40 holders -Technical documentation & floor plan available Maintenance -Regular maintenance performed -Hydraulic and pneumatic hoses partially renewed -LT module replaced in control cabinet The machine is immediately available and ready for operation. If interested or if you have any questions, please get in touch! All information provided to the best of our knowledge and belief. Subject to change, error, and prior sale.

Condition: excellent (used), Jig boring machine J6B and jig grinding machines J6GA and J4GB Klsdsyartnepfx Ah Nol

Condition: used, Year of construction: 2013, x-travel 750 mm y-travel 1.000 mm Kjdpfx Ahex Ti Dro Nsll z-travel 870 mm control Siemens spindle tunring speed 18.000 U/min tool taper HSK 63 number of spindles 2 no. of tables 2 Number of axes 5 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 1996, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 825 mm, controller model: Mazatrol M Plus, table width: 630 mm, table length: 630 mm, overall weight: 19,800 kg, spindle speed (max.): 10,000 rpm, Mazak FH 680 X • X axis 1100 mm • Y axis 800 mm Ksdoyan Diopfx Ah Njll • Z axis 825 mm • Rotary table 360° – 1° indexing • 2 pallets • Table size 630x630 mm • 10,000 rpm, BT 50 • Through-spindle coolant (IKZ) • Year of manufacture: 1996 • 19,800 kg Can be inspected under power.

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 136722, travel distance X-axis: 560 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Mazatrol M Plus, table width: 400 mm, table length: 400 mm, overall weight: 9,500 kg, spindle speed (max.): 10,000 rpm, Mazak H415 • X 560 mm • Y 510 mm • Z 510 mm • Rotary table 360° - 1° indexing • 6-pallet magazine • 120-tool magazine • SK 40 • Through spindle coolant (IKZ) • Year of manufacture: 1998 • 9,150 kg Kedpfx Ahsyan Axs Noll Can be inspected under power.

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 8868, Technical characteristics: Work Area Kjdpfx Ahoyanixe Noll # Table diameter: 1.2 m # Manual and automatic mode: available # Maximum height: 2.20 m # Adjustable speed and tension. # Maximum load: 1500 kg Electrical Equipment # Operating voltage: 230 V / 10A Machine status: WORKING

Condition: new, Year of construction: 2025, operating hours: 50 h, functionality: fully functional, machine/vehicle number: HorizOne50_2, overall weight: 1,500 kg, tool height: 300 mm, operating speed: 10 mm/s, total length: 1,850 mm, total height: 1,250 mm, total width: 850 mm, reverse speed: 40 mm/s, working height: 1,000 mm, table width: 1,000 mm, table length: 1,000 mm, table height: 1,000 mm, stroke length: 250 mm, pressing force: 50 t, length stop: 1,000 mm, working width: 300 mm, lifting speed: 10 mm/s, bending force (max.): 50 t, warranty duration: 36 months, Electric horizontal bending machine HorizOne 50 with spindle drive from CoastOne in Finland. Kledpfsxd U Emjx Ah Nol 500kN pressing force thanks to precise and low-maintenance spindle drive with servo motor and servo controller. Simple, intuitive programming with the proven CoastOne TC12-2D control system. Automatically controlled side stop for convenient processing of your sheet metal parts from individual part production to series production.

Condition: excellent (used), Year of construction: 1998, Fanuc System 16 MC control Travel paths X/Y/Z 800/750/770 mm Spindle speed 20,000 rpm Tool magazine for 132 tools HSK A-63 Ksdpfx Ahex Tf Nwj Nell Dual pallet changer 630x630 mm Knoll system with internal coolant supply Chip conveyor

Condition: good (used), Year of construction: 2008, operating hours: 9,267 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 1,000 mm, workpiece weight (max.): 1,200 kg, total height: 30,410 mm, total length: 70,000 mm, total width: 44,270 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 6,000 rpm, coolant supply: 30 bar, spindle motor power: 26 W, spindle nose: ISO 50, number of spindles: 60, tool length: 550 mm, tool diameter: 250 mm, Equipment: chip conveyor, rotational speed infinitely variable, Horizontal machining center with automatic pallet changer "DOOSAN mod.HM 630" with CNC Fanuc 18i-MC Ksdpstvf Smjfx Ah Njll

Year of construction: 2011, condition: ready for operation (used), Horizontal machining center with 5-axis Fanuc CNC, tilting table with 120° and continuous B-axis. Kledpfx Aoku A A Hsh Nsl Pallet magazine with 10 stations, automatic tool changer with 199 stations. Accessories included with the machine: Chip conveyor, high pressure coolant system through the spindle line with separate tank and paper filter.

Year of construction: 1997, condition: excellent (used), For sale we offer a blockmold machine with the following specifications: Block dimensions: 1300 × 1040 × 5300/4000 mm – VARIO PLC control system: SIEMENS S7 Vacuum system pumps: SIEMENS Hydraulic system pump: BOSCH After being purchased by our company, the block mold underwent a comprehensive inspection, including the removal of all internal panels and thorough cleaning of the internal steam and vacuum channels. The machine is in excellent technical condition and is characterized by high efficiency. Klodpfx Ahon Tn Hrs Nol The offer also includes a complete set of documentation, including electrical, hydraulic, pneumatic diagrams, and technical drawings. We also have other EPS polystyrene production machines available for sale, such as: ICI CALDAIE steam generator (2000 kg/h) 2× steam accumulators with capacities of 10,000 liters and 20,000 liters (RUTHS tank) 3× EPS block cutting lines 2× blockmolds Pre-expander (high-capacity continuous pre-expander) There is also the option to purchase a complete production line (including installation, commissioning, and operator training).

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, saw blade diameter: 600 mm, FOR SALE — Soenen Hendrik CNC Machining Line for Aluminum Window & Door Profiles A Soenen Hendrik aluminum CNC processing line, fully operational and available for demonstration. Offered due to replacement by an in-house developed CNC system. Key Features ✔ Fully operational and available for on-site demonstration ✔ Automated profile handling: infeed and outfeed transport ✔ Capable of processing up to 20 profiles consecutively without manual intervention ✔ Equipped with 18 milling spindles: • 5 upper and lower (including 1 angled spindle) • 4 front and rear spindles Kodpfox Dcnpex Ah Noll ✔ 600 mm saw with adjustable cutting angle (22°–158°) ✔ Slot milling unit — ideal for T-profiles, mullions, etc. ✔ Automatic label application on finished profiles ✔ Compatible with UniLink for machine control ✔ Outfeed conveyor for scrap/waste removal ✔ Includes UPS emergency power supply ✔ Integrated cameras for process monitoring This machine is an ideal solution for manufacturers looking for automated CNC processing with high throughput and minimal operator involvement. Contact us for pricing, inspection, or additional technical information.

Condition: excellent (used), Year of construction: 1999, Control: Mazatrol Fusion 640M Travels X/Y/Z: 710/610/660 mm Spindle speed: 15,000 rpm Kjdex S R Suepfx Ah Njll Tool magazine for 120 tools SK40 Double pallet changer (500x500 mm) Max. workpiece: Ø 730 mm, H 711 mm, 500 kg Chip conveyor

Condition: good (used), Year of construction: 2014, x-travel 730 mm y-travel 730 mm z-travel 880 mm size of pallet 2 x: 500 x 500 mm spindle speed: 12000 tool taper SK 40 distance spindle center to table 80 - 810 mm milling spindle drive 30 kW max. torque max. 102 Nm max. workpiece weight 500 kg max. workpiece diameter on pallets 800 mm max. workpiece height H = 1100 mm change time of pallets 9,5 sec Max. speed ot the feeder 60000 mm/min rapid traverse 60 m/min tool changer number of tools 40 max. tool diameter 110 mm max. tool-dia with free toolbox 320 mm max. tool weight 30 kg change-time chip to chip 4,4 - 10 sec change-time tool to tool 1,95 sec Number of working hours 15894 h total power requirement 46 KVA weight of the machine ca. 15 t required space 5,5 x 3 x 2,8 m Well-preserved horizontal machining center DMG-Mori, Mod. NHX 5000, built in 2014 with Siemens 840D CNC control with two pallets and 40-way tool changer. Klodpev Htitjfx Ah Njl Read operating hours 23262, spindle hours 15894 Other data: Distance spindle nose - table center 70 - 950 mm Pallet indexing time 1.3 sec Indexing of the B axis (table) 360 x 1 degree Jog feed rate 0 - 5000 mm/min Machine dealer with own stock of 1600 m².

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, pass-through height: 40 mm, pass-through width: 330 mm, table width: 750 mm, product height (min.): 40 mm, product length (min.): 150 mm, product width (max.): 420 mm, product width (min.): 100 mm, roll diameter: 600 mm, type of input current: three-phase, Sitma C-80-750 Overwrapping Machine Klsdpfx Ajyaclnjh Nol - Film module - Register mark/printed film control - 3 transport modules (one of them portable) - Longitudinal ionization system for bagging and shrink-wrapping - Longitudinal sealing system for packaging loose aluminum foil, with the possibility of adaptation for heat-sealable paper (future compliance with EU packaging regulations) - Adapted for connection to multiple feeders Technical parameters - Package type: closed with two sealing systems, one longitudinal top seal and another longitudinal side seal - Minimum/maximum package length: 150-420 mm - Minimum/maximum package width: 100-330 mm - Minimum/maximum package height: 1-40 mm - Minimum/maximum package weight: 10-2,500 g - Maximum output: 11,000 units/hour - Consumable material type: PE-PVC-PPO, with option to adapt for paper according to EU regulations - Minimum/maximum film thickness: 13-50 μm - Minimum/maximum film width: 250-750 mm - Number of wraps: 1 unit - Maximum reel diameter: 600 mm - Sealing bar width: 320 mm