Used Horizontal Wrapping Machine for sale (65,789)

Condition: used, Year of construction: 1992, max. wheel diameter 150 mm gear width 300 mm max. module 4,5 min. module total power requirement 20 kW weight of the machine ca. 6 t Bodpfx Aet Hwxbsdrodd dimensions of the machine ca. m

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. Bdodpfx Aet Hw D Rodrsd " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: used, Year of construction: 1999, x-travel 800 mm y-travel 630 mm z-travel 560 mm total power requirement 60 kW weight of the machine ca. 12.5 t dimensions of the machine ca. m H E L L E R (Germany) 5 Axis - CNC Controlled Horizontal Machining Centre Model FST- MC 160 / 800 / E Year 1998 Only approx. 500 hours in operation _____ Working range: Longitudinal stroke X axis 800 mm Vertical stroke Y axis 630 mm Cross stroke Z axis 560 mm NC rotary table Tilting A axis 180 ° Turning B axis 360 ° Size of pallet, approx. 250 x 620 mm Tool holder HSK 63A Spindle speeds, infinitely variable 63 - 20,000 rpm Bodpfst Hwrhjx Adrsdd Feeds / quick feeds XYZ 1 - 70,000 mm/min Spindle drive 24 kW Total electrical load, approx. 60 kW - 400 V - 50 Hz Weight, approx. 12,500 kg Accessories / Special Features * 5-Axis SIEMENS CNC Path Control, Model SINUMERIC 840 D, allows working operation on 5 sides. * Workpiece handling system: Workpiece is mounted on a pallet outside the machine and is transported via a conveyor into a lifting/turning device, which brings the workpiece onto the table, where it is automatically clamped and machined. * 40-position tool magazine with tool replacement door, and laser-operated tool breakage control. * Internal high pressure coolant supply, 50 bar. * Coolant preparation unit with filter and temperature control. * Oil mist exhaust. * Separate cooling aggregate for motor spindle and switch cabinet. * CO² fire extinguisher. * Chip conveyor. * Complete covers for the working area. Machine comes from the design department of an car manufacturer and was only used for trials. The new price in 1998 was approx. 1.3 million DM (EUR 650,000.00). The machine is very suitable for medium-sized production series. Ideal for aluminium.

Condition: used, Year of construction: 2000, grinding length 1600 mm grinding width 600 mm workpiece height 500 mm total power requirement 50 kW Bsdpst Hxcbefx Adrodd

Condition: used, Year of construction: 1969, grinding length 500 mm grinding width 200 mm workpiece height 250 mm total power requirement 5,5 kW weight of the machine ca. 2500 kg dimensions of the machine ca. m J U N G Horizontal High Precision Surface- and Profile Grinding Machine Model HF 50 RD, Year 1969, partially reconditioned in 2021 Serial-no. 4082 _____ Grinding length max. 500 mm Grinding width max. 200 mm Table size 600 x 200 mm Grinding height under grinding wheel approx. 250 mm Table cross travel approx.. 230 mm Table slide cross stroke 0,2 - 8 mm/table stroke Table longitudinal travel max.. 550 mm Table speed longitudinal 1 – 20 m/min. Measurement of grinding wheel 225 x 25 x 51 mm Grinding wheel speed infinitely adjustable 1.000 - 4.500 rpm Vertical feed 0.001 - 0.01 mm/stroke Grinding spindle drive infinitely variable load 0,4 – 1,5 kW Total electrical load 5,5 kW - 380 V – 50 cycles Weight approx. 2.500 kg Accessories/Special Features: • Due to the infinitely variable speed range of the grinding wheel this design is especially suited for grinding of high alloyed steels and carbide, hardmetal, etc. • Set up switches for plunge-in or normal pendular-grinding with automatic infeed • Automatic infeed of grinding slide during surface- and/or profile grinding, (plunge-in cut)with automatic stop of infeed by contact-Gauge. • motorized rapid feed of grinding head up/down • Manual straight grinding wheel-dressing device mounted above the grinding wheel • Manual Table mounted, swivable magnetic chuck make BRAILLON size 400 x 200 mm • separate converter cabinet for infinitely variable speed regulation and with respective display of cutting speed in m/sec. Bodpfxot Hwzio Adredd • Wet grinding facility including coolant tank and bandfilter cleaning device, separate standing, • Including 3 separate flanges, some grinding wheels, service tools, etc. Condition : good – can be inspected here under power, partially reconditioned by a JUNG Specialist (table pistons, lubrication, infeed system, Dresser, covers, etc.) Delivery : ex stock – as inspected Payment : net– after completion of contract

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 308, table width: 850 mm, table length: 1,250 mm, stroke length: 200 mm, pressing force: 42 t, empty load weight: 1,000 kg, TECHNICAL DETAILS Bending capacity: 42 t Max. bending stroke: 200 mm Table length: 1,250 mm Bdsdpfxjzdfb Ts Adrsd Table width: 850 mm Stroke length: 300 mm Stroke width: 200 mm MACHINE DETAILS Motor power: 4.0 kW Dimensions & Weight Dimensions (L x W x H): 1,500 x 2,500 x 1,800 mm Shipping weight: 1,000 kg Shipping packages: 2 units EQUIPMENT Documentation CE marking

Year of construction: 2024, condition: as good as new (ex-display), Stierli bending machine 120HE Horizontal bending machine, with Bdodpsid Izgofx Adrsd bending force of 12 tons tool height 130 mm stroke 0-170 mm bending capacity for flat steel 130x12 mm pipe bending for steel pipes up to 1 1/2" capable of performing minor straightening operations demonstration machine, year of manufacture 2024

Year of construction: 2024, condition: as good as new (ex-display), Stierli bending machine 420HE Horizontal bending machine, with Bjdpoid Izkjfx Adredd bending force of 42 tons tool height of 200 mm stroke of 0-310 mm, stepless bending capacity of 200x24 mm St40 straightening capacity for HEB180 Bending and straightening program via selector switch Exhibition machine, year of manufacture 2024, incl. hand-held control and foot pedal Wear-resistant machine table Machine in new condition

Year of construction: 1963, condition: used, machine/vehicle number: 18135, Broaching Machine – Horizontal Bedpfx Adjbrcy Norodd Manufacturer: Forst Typ: RIW 100/2200 Force: 100 Tons Stroke: 2.200 mm It is possible to buy the Crane - see offer no Y941

Year of construction: 1995, condition: used, machine/vehicle number: 20225, Color: green Slighty used! DIN 1415 Bdodpfebrcmfsx Adred Impetus electromechanic

Year of construction: 1991, condition: good (used), machine/vehicle number: nn, Broaching Machine – Vertical Manufacturer: Locher Model: RWIL 10 x 1250 Year of manufacturing: 1991 Force: 10 Tons Stroke: 1.250 mm Area required: approx. 170 x 150 cm With automatic lead Bdjdpfx Ajfc T Ewsdred Magnetic chip-conveyor

Condition: excellent (used), Jig boring machine J6B and jig grinding machines J6GA and J4GB Bdsdpfjyartnsx Adred

Condition: good (used), Smipack SL55 Shrink Wrapper This machine is in very good condition and ready for production. The photos show the actual product. Made in Italy. Bdedpfx Aszdav Ssdrsd Description: Smipack series of shrink wrapping machines. Their main advantage is their compact design, requiring less space than other similar units on the market. Technical specifications: Product dimensions: 560x430mm Maximum product height: 260mm Power supply: 230V.

Condition: good (used), Minipack Torre Mailbag Packaging Machine This machine is in excellent condition and ready for production. The photos show the actual product. Made in Italy. Bsdpfx Aezdavxjdrsdd Manufacturer’s description: The Mailbag is a compact digital bagging system, ideal for packaging brochures, newspapers, and books. Powered by a single-phase power supply (airless), it’s easy to use with wheels, and the system can be easily moved from one location to another with minimal fuss. A product, such as a magazine, inserted into the feeder activates a photocell, detects the package, and moves the bag and product into the sealing system. A combination of transverse and longitudinal seals closes the package and creates a seal for the next product. The finished package gently falls into the receiving hopper at the bottom of the machine. Technical data: Production speeds, depending on package and film dimensions (up to 1200 pph) Min. package width: 160 mm Maximum package width: 250 mm Min. package length: 100 mm Maximum package length: 360 mm Maximum film thickness: 30 microns Machine dimensions: 600 mm x 840 mm x 1050 mm Weight: 144 kg Power supply: 230V Power consumption: 0.6 kW

Condition: good (used), - Completely overhauled by us, ready for immediate use Bdedpfx Asr Nvldjdrsd - Type: 100013 - Serial number: 011136 - Glass thickness 2-12 mm - Minimum glass dimensions 120 x 80 mm - Max. Washing width: 1000 mm - Dimension: L=2900mm W=1650mm H=1250mm - Roller spacing 55mm -3 pairs of brushes / 1 pair of racks - Connected loads: 380/50V, 13kW - Price on request

Condition: used, Year of construction: 2004, Horizontal machining center Manufacturer: Makino Bedpfx Adszc Ifrjredd Type: a51-A60 Year of manufacture: 2004 Control: CNC FANUC System 16 iM Travel distances: X/Y/Z: 560 x 560 x 500 mm Distance from table center to spindle nose: 70 – 570 mm Maximum swiveling height from pallet surface: 900 mm Permissible swiveling range in the work area: 630 mm Tool magazine: 60 tool positions Maximum load weight: 180 kg T-command, 4 digits, freely assignable Tool change time: 0.9 sec. Maximum tool dimensions: Ø 70 mm, 360 mm long Maximum tool weight: 8 kg Spindle unit 50 – 12,000 rpm Spindle unit with tool holder for tapered hollow shanks according to DIN 69893 HSK-A63 Tool clamping force: 29 kN Pallet changing system, integrated into the machine Pallet change time: 7 sec. Pallet changer with storage of 2 pallets in alternating sequence on a storage station Pallet holder rotatable, indexed 90° division 0-position electrically controlled. Permissible load weight max.: 400 kg Pallet size: 400 x 400 mm High-speed machining Contour milling with feed rates up to 40,000 mm/min. Function can be used for milling in 3 axes X, Y, and Z 2 ½ axis operation (X/Y axis circular, Z axis linear) for thread and curve milling Direct thread cutting by synchronizing the feed drive of the Z-axis via pulse encoder in the spindle motor Maximum speed: n = 4,000 rpm Feed drive with AC servomotors Rapid traverse speeds X, Y, Z axis = 1 … 50,000 mm/min. Feed rates X, Y, Z axis = 1 .. 40,000 mm/min. Manual operation, freely movable, via direction keys Coolant system Chip and splash protection central chip/flush system Machine light All-round flashing beacon, 3-color Total weight: 7,800 kg Space requirement approx.: 11.5 m2 Overall height approx.: 2.7 m 2 machines available! 2726

Condition: good (used), Year of construction: 2002, Ref. -No.: 10633 Manufacturer: ANAYAK Type: VH Plus 2000-MG Year of construction: 2002 Type of control: CNC-Steuerung Control: Heidenhain Bdodjzc D Enopfx Adred Storage location: Halberstadt Country of origin: Germany serial number: M200XXX X-Travel: 2000 mm Y-Travel: 1500 mm Z-Travel: 1500 mm No. Of Working Stations: 90 Control: 106.253 H machine: 93.170 H Program run: 41.859 H Head and turntable: 1600 x 1450 mm

Condition: good (used), Year of construction: 2008, Ref. -No.: 10335 Manufacturer: HüLLER HILLE Type: NBH 170 Year of construction: 2008 Type of control: CNC-Steuerung Control: Sinumerik 840D pl Storage location: Halberstadt Country of origin: Germany X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 800 mm Bsdpfx Adezc Dylorsdd B-Axis: 360 ° Distance spindle center - table: 150 mm Table Dimensions (Lengthxwidth): 500 x 630 mm Table Load: 800 kg Max. Workpiece Weight: 40 kg Max. Tool Length: 650 mm Max. Tool Diameter: 325 mm Workpiece Diameter At Full Load: 100 mm Tool Taper: HSK - 100 Spindle Speed: RPM Rapid Traverse: 60 m / min Machine length: 9500 mm Machine width: 4500 mm Machine Height: 3500 mm Further information: Coolant system = 1250 l

Condition: used, Year of construction: 1999, x-travel 560 mm y-travel 510 mm z-travel 510 mm Control MSC 502 distance spindle center to table 50 - 650 mm distance Spindlenose and center of table 100 - 610 mm turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 22 / 18,5 kW tool taper MAS BT-40 spindle bearing diameter 70 mm numbers of pallets 2 size of pallet 400 x 400 mm max. workpiecediameter 580 mm max. workpiece height 650 mm switching time 90°: 2,5 sec change time of pallets 6,0 sec number of toolpositions 60 pos. tool taper MAS BT-40 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8 kg Bsdpfxjzczc Rs Adredd change-time tool to tool 1,5 sec change-time chip to chip 3,7 sec rapid traverse ( X / Y / Z ) 32 m/min feed speeds 1 - 24.000 mm/min Tipp feed 0 - 1.260 mm/min total power requirement 63 kVA weight of the machine ca. 9,0 t dimensions of the machine ca. 5,5 x 4,5 x 2,7 m CNC - Machiningcenter Horizontal MORI SEIKI - SH 400

Condition: used, Year of construction: 1983, Schenck M480-1/450 High-Precision Dynamic Horizontal Balancing Machine with CAB 690 Control (1983) Speed Range 20-5,000rpm. Maximum Rotor Weight 450kg. Asset No.10_627. S/No. AHG 0459 (1983). Description With Interlocked Guards & 2 Roller Steady Supports. Bjdey Dr Unepfx Adrjdd

Condition: new, Number of boring spindles 1 St. Boring depth max. 150 mm Motor output 1,8 kW Götzinger HR 150 - Hoffmann system ----- The machine that gives you the highest precision when drilling two levels guaranteed. Frame and slot drilling machine, enables drilling in Bdodpfxoytx T Ie Adred two levels in one clamping. - Well thought-out, precise and practical stop system - particularly smooth and play-free grid positioning, Feed and transverse adjustment - Guidance systems for the highest demands - Special drill chuck - precise, quiet concentricity - for drilling levels via digital display - Two side stops offer enormous advantages, center stop on request - Continuous front stop with position markings - Drilling pattern depending on the wood profile - free choice, in a 12 mm grid Special grids also possible - integrated dust extraction - the exchangeable additional equipment (e.g. drill heads, Miter stops, parapet railing device, side and folding stops) can be easily installed without tools. and dismantle. Technical data: Drilling unit ----- Height adjustment in 2 levels via digital display Height adjustment 100 mm pneumatically Drilling stroke/depth 150 mm by hand Transverse adjustment 320 mm via grid Drilling pattern width 12 mm pitch, standard Three-phase motor 230/400 V, 50 Hz, 1,420/2,840 rpm, 1.3-1.8 KW Tool holder ----- Special drill chuck with 2 tool changing inserts 1 x M10, 1 x D 16 stop system ----- 2 side stops can be swiveled in/out 1 longitudinal stop (tube) with adjustable folding stop approx. 1500 mm Elongated hole stop left and right Workpiece clamping ----- pneumatically via foot valve Dust extraction Special accessories - see PDF attachment ----- Price of the above mentioned machine on request! ----- Recommended accessories (additional charge): Two-jaw chuck 2–20 mm, replacement part: EUR 648.00 Chassis: EUR 295.00 2 workpiece support arms (left/right), approx. 800 mm, swivelling: EUR 1,298.00 ----- (technical data according to manufacturer - no guarantee!)

Condition: new, pressure 28 t Bedpfeqzmgqjx Adredd piston stroke 180 mm diameter of piston 130 mm table-size 300 x 550 mm working feed 2 - 9,8 mm/sek return speed 20 mm/sec Max. pressure 200 bar bending capacity - flat iron 200 x 10 mm weight of the machine ca. 800 kg dimensions ca. 1150 x 1103 x 750 mm The horizontal hydraulic press (28 ton) can be used for many different metal working jobs. The press has a piston stroke of 192 mm and can be equipped with all kinds of tooling for specific bending or straightening jobs. We supply a standard toolingset with this press including a stampholder and backgauge. However, we also produce custom-made tooling for your specific request. Thanks to the NC-control you can easily set the cylinder stroke and save up to 100 working cycles. With this horizontal hydraulic press you are able to bend, straighten, notch, cut and form. A universal hydraulic press that serves all your needs in cold metal working processes.

Year of construction: 1987, condition: used, grinding length max. 630 mm grinding width max. 200 mm workpiece height . mm x-axis max. 250 mm y-axis max. 710 mm Bdjdpsgbgawjfx Adrod distance spindle center to table max. 500 mm table surface area 0,25 mm table load max. 1,1 t table speed -stepless- 2 - 18 m/min cross feed autom. . dust exhaust 0,25 kW coolant pump 0,09 kW total power requirement ca. 4,5 kW weight of the machine ca. 1,3 t dimensions of the machine ca. 2400 x 1600 x 1900 mm Adjustments Y axis: 1 scale value = 0.005 mm Z axis: 1 scale value = 0.002 mm Manual adjustment (within the range of 250 mm of the Y axis): 80 mm Speeds: automatic cross feed Adjustment path in Y direction: - intermittent 0.2 - 20 mm per stroke; - continuous: 0 - 4 m/min Grinding wheel Ø max. 200 mm Grinding wheel bore: 51 mm Grinding wheel width: 20 mm Diamond dressing unit Digitaldisplay for 2 advertisement vertical infeed

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: K500-50739, total length: 14,000 mm, total height: 2,500 mm, total width: 3,600 mm, type of input current: three-phase, product height (max.): 100 mm, product height (min.): 30 mm, product length (min.): 500 mm, product length (max.): 1,800 mm, product width (max.): 1,500 mm, product width (min.): 600 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 33 A, working height: 900 mm, passage height: 250 mm, table width: 1,700 mm, table length: 2,000 mm, year of last overhaul: 2022, workpiece weight (max.): 100 kg, Equipment: documentation/manual, Dimensions of the entire machine: Width: 3,600 mm Length: 10,600 mm (without feed and deposit areas) Height: = 2,500 mm Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Properties of the PE shrink flat film • Shrink film suitable for the shrink sealing process. (Top and bottom films must be laterally sealable in the tunnel). • Biaxial shrinkage value of approximately 50-60% lengthwise, approximately 40-50% crosswise • Antistatic treatment. • Shrink film with needle perforation. Improves the shrinking process and has higher gas and water vapor permeability. Shrink film to be used • Biaxially shrinking, needle perforated. • Spooled on rolls, sound-tight and with straight edges. Foil thickness: Application: approx. 40 - 60 μm. Film widths: Application: 800 mm, 1100 mm, 2000 mm Roll outer diameter: max. 350 mm Core outer diameter: min. 90 mm Bottom film calculation: Package width + 200-250 mm Top film calculation: Package width + (2 x height) + 200-250 mm Bdjdpfxovvlyis Adrsd Technical component data: Conveyor belts: Infeed conveyor (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. Roller conveyor behind the tunnel (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. KFE standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Package height (passage height): max. 250 mm / max. Film roll diameter: 350 mm Film thickness: approx. 40-60 µm high-quality PE film / Weight: approx. 3,100 kg Side sealing: Sealing bar length: 1,850 mm / Adjustment range: 500 - 1,600 mm / Adjustable feed rate: 13 - 23 m/min. Shrink tunnel ST / lI -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Adjustable feed rate: 6 - 23 m/min. The machine can be inspected at the production site.

Condition: excellent (used), Year of construction: 2020, operating hours: 23,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 120 m/min, rapid traverse Y-axis: 120 m/min, rapid traverse Z-axis: 120 m/min, torque: 80 Nm, controller manufacturer: Siemens, controller model: Sinumerik 840 D SL Solution Line mit NCU 730, workpiece diameter (max.): 1,830 mm, workpiece weight (max.): 800 kg, total height: 3,500 mm, total length: 5,900 mm, total width: 3,990 mm, overall weight: 24,500 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 17,500 rpm, operating hours of spindle: 8,000 h, Equipment: chip conveyor, Horizontal double swivel-beam machining center with 2 spindles - Linear and torque motors in the feed axes - Gantry drive for the Y-axis - Independent Z-axes and X-axes - Double swivel beam with two integrated rotary axes for loading and unloading parallel to main processing time - Siemens Sinumerik 840 D SL Solution Line control with NCU 730 - Oil distributor for NC rotary table - 1 set of clamping bridge supports - Torsion compensation - 5th axis directly driven twice - Boring head indexing - Base module for clamping hydraulics - Pneumatic pressure intensifier - Scraper belt conveyor - Automatic loading door - Emulsion mist extraction unit - Automatic rinsing cycle for loading area - Tool flatness monitoring - Position monitoring, base module and extension Bdjdpfx Aow Hgk Ajdrjd - Grating/walk-on grid - 24 quick-release couplings SW-ID No. 413288 - Tool breakage monitoring, inductive etc.