Used Horizontal Baler for sale (6,651)

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational Bsdpfxsx Dnb Uo Ab Iewk • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: used, Speed-Tech Equipment horizontal cardboard baler, bales are approx. 1200 lbs., 6' long x 36" wide x approx. 28" tall, 3 phase, in working condition, winning bidder responsible for proper removal. Bjdpfx Asxd D Nzeb Iewk

Condition: ready for operation (used), machine/vehicle number: 154.1004.094, Professional Neolt Electro Foam Trim Plus 310 horizontal cutting machine for foam board, PVC, cardboard and similar materials. Bedpfx Ajywpcpjb Iowk This is a high-quality Italian industrial cutter with a maximum working width of 310 cm, suitable for sign making, printing industry and production environments. Main features: • Manufacturer: Neolt (Italy) • Model: Electro Foam Trim Plus 310 • Working width: 310 cm • Electric cutting system • High precision cutting • Suitable for foam board, PVC, cardboard and similar materials Included accessories • Multiple blade holders: 5 mm, 10 mm, 20 mm and 30 mm • Spare blades included • Original manual • Electrical spare parts (circuit boards etc.)• Additional accessories and components Condition: Machine is in good working condition and fully functional. Cutting accuracy is very good. The main unit is clean and well maintained. Support tables show normal signs of use. Additional information: • Maximum cutting thickness up to 30 mm (depending on blade holder) • Currently equipped with 10 mm blade holder • Mounted on wheels for easy movement • Support tables included Logistics Machine available for immediate pickup. Located in Finland. Loading assistance available. Extra Video available showing cutting operation! Complete set with accessories and spare parts – ready for professional use! Keywords: foam board cutter Neolt cutter electric cutter horizontal cutter foam trim sign making equipment large format cutter

Condition: excellent (used), Horizontal/vertical rotary table Chuck: Ø 350 mm Shelf diameter: Ø 400 mm Height without mandrel: 140 mm Bsdpfsyr Numsx Ab Ijwk Total height: 250 mm Base dimensions: Length 430 mm x Depth 370 mm Weight: approx 150 kg Possibility to work horizontally or vertically The increment is done by the front handle

Year of construction: 2014, condition: like new (used), COOLING (DEEP FREEZING) HORIZONTAL TUNNEL (Instruction manual added) Liquid nitrogen deep-freezing of foodstuffs Model ZIP FREEZ SILVER LINE 2 type 90X12 Overall dimension in m: Lengh 10,30 Width 2,30 Height 1,81 Height in cleaning position 2,31 Deep-freezing chamber Lengh 8,70 m Effective width 1,20 m Bjdpoyf Hlisfx Ab Iewk Height 0,25 m Surface in m2 10,44 Weight 3200 kg Made by SEPAR, France Was used for cooling of the hot filled desserts In complete with Associated Controls, Conveyor and Pipework

Condition: excellent (used), Year of construction: 2014, Horizontal conveyor 2000x800mm year 2014 Bedpfx Aju N Aykeb Iowk price: €1,850.00 contact: Mr. Rainer Eckerle

Condition: excellent (used), Year of construction: 2015, Horizontal conveyor 3000x800mm Bsdeu N Argspfx Ab Iswk year 2015 price: €2,450.00 contact: Mr. Rainer Eckerle

Condition: excellent (used), Year of construction: 2015, Horizontal conveyor 3000x800mm year 2015 price: €2,450.00 contact: Mr. Rainer Eckerle Bedpfxju U Ii Ee Ab Iewk

Condition: excellent (used), Year of construction: 2014, Horizontal conveyor 2000x800mm year 2014 Bwodpou N Axgsfx Ab Isk price: €1,850.00 contact: Mr. Rainer Eckerle

Condition: excellent (used), Year of construction: 2015, Horizontal conveyor 3000x800mm year 2015 price: €2,450.00 contact: Mr. Rainer Eckerle Bwsdpfxju N Aqco Ab Iok

Condition: used, total length: 5,300 mm, total width: 2,600 mm, total height: 30,003,500 mm, water tank capacity: 25,000 l, External dimensions: W 2600 mm, H 3000/3500 mm, L 5300 mm. Horizontal stainless steel tanks – 2 units. Bwodpfxewnn Ape Ab Iek Manhole at the front 2.5" outlet at the end. AISI 304.

Condition: refurbished (used), 105m3 horizontal steel tank with heating coil Diameter: 2.80m Bwodpfexqfwtjx Ab Isk Length: 17.10m

Condition: used, 50 m3 / 50,000 l horizontal steel tank Diameter: 2.50 m Length: 10 m Weight: 16 t The tank is pressurized. Steel thickness: 20 mm / 2 cm Bsdpfx Abextmzxs Iswk Pressure: up to 20 atmospheres Steel cradles (legs) included

Condition: like new (used), Horizontal carbon steel tanks 73.000l Bjdpoibh S Hefx Ab Iswk Dim. 3x 11m Cyllinder thickness 8mm Bottom thickness 12mm Equipped with a ladder.

Condition: good (used), Protech Horizontal Collator Model: HC2010 Plastic belt, belt width: 250 mm Distance between dividers: 200 mm, divider height: 150 mm Clearance: 140 mm x 150 mm Bwedpfx Aev T D Dusb Isk Total dimensions: 2900 mm x 560 mm x 1540 mm.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 1153 000006 3, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller model: Siemens 840 D Solutionline (PCU 50), spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel X-axis: 1,250 mm Travel Y-axis: 1,000 mm Travel Z-axis: 1,000 mm Feed rate X, Y, Z-axis: 20 - 60,000 mm/min Rapid traverse X, Y, Z-axis: 60 m/min B-axis travel: 360 x 0.001° B-axis feed rate: 10,800 /min Max. table rotation: 30 rpm Max. workpiece diameter: 1,250 mm Max. workpiece height: 1,580 mm Max. workpiece weight: 1,500 kg Clamping area: 800 x 800 mm Pallet weight: 570 kg Bedpfoyvzl Hsx Ab Iswk Spindle speed: 20 - 8,000 rpm Max. permissible weight difference for pallet loading: 1,000 kg Tool holder: SK 50 according to DIN 69871 Maximum tool length: 650 mm Tool magazine: 120 positions MACHINE DETAILS Control: Siemens 840 D Solutionline (PCU 50) Dimensions & Weight Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of the machine (without magazine or other accessories): approx. 20,000 kg Required space: approx. 7,000 x 6,000 mm Total machine weight: 24,000 kg Operating hours "Counter external 2 (read off)": 60,197 h EQUIPMENT Chip conveyor with coolant tank Coolant/lubrication system 4x machine pallets Tool magazine Oil mist extraction unit Length measuring system Y-axis (new spare part) Lubrication unit 230V 0.12 30bar (new spare part) Gear unit ZAHNRADP-AGG*MKF1-KW2-20036 (new spare part) Cyclo gearbox*F1C-A25 (new spare part) Retrofit kit for power module (new spare part) Lifting devices for the machine

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,447 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, table width: 500 mm, table length: 500 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 560 mm Travel Z-axis: 560 mm Bodpfxeytnf Hs Ab Iswk Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 30 m/min Rapid traverse Z-axis: 24 m/min Table width: 500 mm Table length: 500 mm Table load: 400 kg MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,445 x 3,055 x 2,200 mm Total weight: 7,000 kg Spindle hours: 2,447 h EQUIPMENT Automatic pallet changer 4-axis design incl. B-axis (table rotation)

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 123426, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 800 mm, workpiece weight (max.): 2,000 kg, spindle speed (max.): 2,300 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 1,200 mm Travel Y-axis: 1,000 mm Travel Z-axis: 800 mm Bwedjyw N Sqopfx Ab Iok Workpiece weight (max.): 2,000 kg Table width: 630 mm Table length: 800 mm Spindle speed: 10 - 2,300 rpm Spindle motor power: 22,000 W Number of spindles: 1 Number of tool magazine slots: 161 MACHINE DETAILS Control: Siemens Sinumerik System 800 - 840C Total weight: 24,000 kg EQUIPMENT Documentation/manual Infinitely variable speed control Chip conveyor

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 1110001, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 800 mm, workpiece weight (max.): 1,500 kg, spindle speed (max.): 3,500 rpm, No minimum price – guaranteed sale to the highest bidder! Further technical details about the machine can be found in the attached machine description. TECHNICAL DETAILS Travel X-axis: 1,250 mm Travel Y-axis: 1,000 mm Travel Z-axis: 800 mm Spindle speed: 10 – 3,500 rpm Number of spindles: 1 Rapid traverse X-axis: 25 m/min Rapid traverse Y-axis: 25 m/min Rapid traverse Z-axis: 25 m/min Feed rate X-axis: 25 m/min Feed rate Y-axis: 25 m/min Feed rate Z-axis: 25 m/min Max. workpiece height: 1,250 mm Max. workpiece diameter: 1,230 mm Max. workpiece weight: 1,500 kg Table width: 630 mm Table length: 800 mm Table load: 1,500 kg Bwjdpfx Ajyw N Irsb Iek Number of tool magazine slots: 122 Tool holder diameter: 130 mm Tool length: 630 mm Tool weight: 50 kg MACHINE DETAILS Control: Siemens Sinumerik 840C Coolant supply: 50 bar Dimensions & Weight Dimensions (L x W x H): 9,500 x 8,000 x 4,300 mm Weight: 30,000 kg X, Y, and Z axes Resolution: 0.001 mm Position uncertainty P: 0.010 mm Positional scatter Ps: 0.006 mm B-axis Positioning accuracy (face gear disengaged): 10″ Indirect measuring system B-axis indexing accuracy (via face gear): 6″ Machining accuracy Circular interpolation: 0.015 mm Runout in the taper of the working spindle: 0.006 mm Pallet change accuracy: ± 0.015 mm EQUIPMENT Documentation/manual Infinitely variable speed adjustment Chip conveyor Note: The door on the right pallet station is jammed.

Condition: used, Year of construction: 2012, grinding length 1000 mm grinding width 600 mm workpiece height 400 mm table-size 1.100 x 500 mm max. table load 1.000 kg dist. center of grinding spindle - table 600 mm table travel longitudinal 1400 mm table travel cross 550 mm table feed 1 - 30 m/min turning speed range - grinding wheel 1.000 - 3.000 U/min power capacity - grinding motor 11,0 kW grinding wheel size 400 x 80 x 127 mm magnetic clamping plate 1000 x 500 mm dressing device Tischabrichter voltage 400 V total power requirement 21 kW weight of the machine ca. 6,0 t dimensions of the machine ca. 4,30 x 2,95 x 2,55 m band filter unit 1,80 x 1,30 x 0,80 m hydraulic power unit 0,90 x 0,75 x 0,95 m suction device 1,10 x 0,60 x 0,70 m - Serial-No.: Spindle ON: 11.742 hours - autom. vertical feed Bwjdpfx Ajya Ihhsb Isk - table dresser with compensation - electr. hand wheel - paper band filter unit with magn. separator - coolant mist extraction unit

Condition: new, cutting diameter 225 mm saw band length 2480 mm cutting width max. 245 x 150 mm voltage 230 V power capacity 1,5 kW dimensions of saw-band 2480 x 27 x 0,9 mm mitter cutting 0 - 60 ° cutting speed 20 - 90 m/min weight of the machine ca. 185 kg dimensions of the machine ca. 1,4 x 0,69 x 1,7 m Bwodenlbmzjpfx Ab Iok - stepless speed - stepless feed - miter cut - Bi-metal saw band - Material stop - Machine base - Coolant device

Condition: used, Year of construction: 1995, cutting diameter 280 mm saw band length 4200 mm cutting width 280 x 280 mm dimensions of saw-band 4200 x 34 x 1,1 mm cutting speed 18 - 115 m/min multiple feeding 0 - 6000 mm power capacity 3,0 kW voltage 400 V total power requirement 5,0 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,35 x 2,40 x 2,00 m - serial-no.: 6082 - control: SIEMENS COROS - OP 15 - chip conveyor - multiple feeding Bwjdpfx Abop Rai Eo Ijk - coolant equipment

Condition: good (used), Year of construction: 2009, operating hours: 22,100 h, functionality: fully functional, HECKERT HEC 1250 ATHLETIC PINOLE For sale is a Heckert HEC 1250 Athletic Pinole horizontal machining center, year of manufacture 2009, currently in ongoing industrial operation. The machine is in exceptionally well-maintained condition and fully functional. It has undergone consistent preventive maintenance over the years. Documented maintenance was performed in 2012, 2014, 2016, 2017, 2018, and 2019. Documented inspections took place in 2021, 2022, and 2023. In 2025, the ZP-KGT was replaced. The machine has approximately 50,100 operating hours. The machine is equipped with a Siemens SINUMERIK 840D Solutionline control and is ideally suited for machining large and heavy prismatic workpieces. The combination of NC rotary table, quill support, SK50 interface, and large tool magazine makes the unit highly suitable for multi-sided machining, heavy-duty cutting, and complex machining tasks requiring minimal setups. Technical Data Manufacturer: Starrag Heckert Model: HEC 1250 Athletic Pinole Year of manufacture: 2009 Machine type: Horizontal machining center Control: Siemens SINUMERIK 840D Solutionline Potential total number of axes (according to documentation): 5 Travel X-axis: 2200 mm Travel Y-axis: 1500 mm Travel Z-axis: approx. 1850 mm Tool holder: DIN 69871 SK50 Tool magazine: 280 positions Max. tool length: 450 mm Max. tool diameter: 250 mm Max. tool weight: 35 kg Measuring probe: Renishaw MP10 Pallet system: 2-pallet system Pallet size: 1000 x 1250 mm Additional pallets (as per documentation): 4 pallets with threaded holes / T-slots Mains connection: TN-C, 3/PEN AC 400 V Rated current: 250 A Connected load: 130 kW Compressed air: 6 bar Operating hours: approx. 50,100 h Features Quill support NC rotary table 280-position tool magazine Renishaw measuring probe MP10 Oil pan Platform Coolant system Chip suction unit Documentation / operating manuals included Maintenance and history Documented maintenance: 2012, 2014, 2016, 2017, 2018, 2019 Documented inspections: 2021, 2022, 2023 2025: ZP-KGT replaced Availability Machine located in Augsburg Dismantling possible from 31.03.2026 Collection by 29.05.2026 Viewing by appointment Scope of delivery Bjdpfx Ajx Syhrsb Iswk Machine as described Without tools Without additional spare parts

Condition: used, Year of construction: 1965, total length: 7,750 mm, total width: 1,400 mm, total height: 1,600 mm, Empty weight: 5.000 kg - Year: 1965 Bwsdpfxoyy Ntms Ab Iek - Documentation available: No - CE certificate present: No - Serial number: 16628 - Drive system: Conventional - Power [kW]: 13.7 - Centre height [mm]: 300 - Swing over bed [mm]: 600 - Carriage turning diameter [mm]: 300 - Distance between centres [mm]: 6000 - Bed width [mm]: 400 - Spindle bore [mm]: 65 - Min. spindle speed [rpm]: 22.4 - Max. spindle speed [rpm]: 1000 - Options: Fixed steady, Quick-change tool post, Removable bed, Travelling steady, Three-jaw chuck - Swing over removable bed [mm]: 900 - Transport dimensions: 7750mm x 1400mm x 1600mm (l x w x h) - Transport weight [kg]: 5000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, overall weight: 270 kg, warranty duration: 24 months, empty load weight: 265 kg, Robust and compact construction High-quality components with a longer lifespan Above-standard productivity Adjustable bale height (three sizes) Automatic start for efficient compaction Bwedpeu Tqmdsfx Ab Isk Bale trolley for easy transport Material selector for cardboard and plastic Full bale indicator and service indicator Compliance with EN 16500:2014 safety standards