Used Horizontal Baler for sale (6,224)

Condition: good (used), Year of construction: 2010, operating hours: 74,323 h, functionality: fully functional, CNC Machining Center HECKERT HEC 1250 Athletic Ram For sale is a used CNC machining center HECKERT HEC 1250 Athletic Ram with ram support. The machine is in operational condition and suitable for heavy-duty machining tasks in industrial applications. Machine Data Machinery Type: CNC machining center with ram support Model: HEC 1250 Athletic Ram Machine Category: Milling machine / machining Year of Manufacture: 2009 Condition: Functioning Operating Hours: 50,100 h Control System: CNC control, Siemens Solutionline 840D Number of Axes: 5 Software: Siemens Sinumerik Mechanics / Spindle Toolholder: DIN 69871 SK50 Spindle Type: SK50 Maximum Tool Weight: 35 kg Maximum Tool Length: 450 mm Maximum Tool Diameter: 250 mm Tool Magazine: 280 positions Probe: Renishaw MP10 Travel Paths X Travel: 2,200 mm Y Travel: 1,500 mm Z Travel: 1,850 mm Pallet System Pallet Pool: 2 pallets Additional Pallets: 4 pallets with threaded holes and T-slots Pallet Size: 1,000 × 1,250 mm Equipment Oil Tray: Available Platform: Available Coolant System: Available Chip Extractor: Available Lodjx Syhrjpfx Ad Njhb Operating Manual / Documentation: Available Crane: Available Maintenance / History Maintenance: 2012, 2014, 2016, 2017, 2018, 2019 Inspections: 2021, 2022, 2023 Last Major Overhaul: ZP-KGT replacement in 2025 Power Supply Mains Connection: TN-C, 3/PEN AC 400 V Rated Voltage: 3AC 400 V Rated Operating Voltage: AC 360 V – AC 440 V Operating Frequency: 49 – 51 Hz Insulation Voltage: AC 500 V Rated Current: 250 A Supply Fuse: NH fuse size 1, 250 A gL, 500 V Connected Load: 130 kW Type of Current: D Compressed Air Connection: 6 bar Transport / Dismantling Machine must be dismantled: Yes Tools for Dismantling / Removal: Not included

Condition: used, Year of construction: 2021, Machine Description for 2021 Model: Horizontal Machining Center NHX 5000 Manufacturer: DMG MORI Bielefeld Hilden GmbH Type / Model: NHX 5000, Fanuc 31iB with CELOS ERGOline Touch Year of Manufacture: 2021 Control System: FANUC 31iB with CELOS / 21.5" Multi-Touchscreen / MAPPS system Technical Data: • Working Area / Travels: - Travel X / Y / Z: 730 / 730 / 880 mm - Pallet size: 500 × 500 mm - Pallet quantity: 2 (with threaded holes) - Minimum B-axis indexing angle: 0.001° (DD direct drive) - Max. rotary table speed: 100 rpm - Pallet load: 500 kg - Hydraulic coupling with 2 hydraulic and 2 air circuits (max. 7 MPa) - Automatic indexing setup station • Performance / Spindle Speed / Drive Power: - Spindle: speedMASTER® motor spindle - Speed range: 35 – 20,000 rpm - Power: 37 / 26 / 18.5 kW (15% / 30 min / continuous duty) Lhsdpfx Asxnkdmjd Nsb - Torque: 221 / 107 / 86.8 Nm - Tool taper: SK40 (7/24 taper, face contact) - Tool magazine capacity: 60 tools (ring-type, random selection) - Max. tool diameter: 70 mm (adjacent) / 170 mm (free) - Max. tool length: 550 mm - Max. tool weight: 12 kg - Chip conveyor: rear discharge with drum filter - Through-spindle coolant interface (8-step pressure control, up to 7 MPa) - Coolant / air switching via spindle - External coolant system: INTERLIT TMF300/600 compact filter unit (70 bar / 32 L/min) • Weight / Dimensions / Electrical Connection: - Machine weight: approx. 12,000 kg - Coolant tank capacity: 800 L - Transformer: 54 kVA - Power supply: 400 V, 50 Hz Equipment / Accessories: - Renishaw OMP60 spindle probe system (optical transmission) - Tool breakage detection system in the magazine - Hydraulic coupling on both pallets with integrated pressure regulation (7 MPa) - Automatic door for setup station - Rotating inspection window (air-driven) - Oil mist extraction system: LTA AC3002 (1,050 m³/h, dual electrostatic stages) - INTERLIT TMF300/600 high-pressure coolant filter system (70 bar, 32 L/min) - EtherNet/IP robot interface - IoTconnector, NETservice, Machine Data Connector (MDC), DMG MORI Messenger - CELOS with touchscreen and MAPPS functionality - Four-color signal light tower - Handheld control device (mobile handwheel) - Central coolant preparation for through-spindle supply - Drain circuit for auto-coupler (to prevent pressure drop) - 10 programmable external M-codes - 2 hydraulic clamping towers (each with 6 hydraulic 2-jaw chucks, GHHY-2B-200.00/K) - Voltage: 400 V, 50 Hz configuration - Air filter unit (T105A-1000MSP) This summary uses industry-standard terminology and structure suitable for platforms such as Machineseeker or TruckScout24.

Condition: used, machine/vehicle number: 16787, Year of construction: 2018, load capacity: 2,500 kg, lifting height: 200 mm, load center: 1,200 mm, construction height: 1,400 mm, fork length: 2,400 mm, overall weight: 1,100 kg, enginetype: Electric, manufacturer: Jungheinrich Lhodpfox U Hibex Ad Nsb

Condition: new, The HB 460 L is a semi-automatic horizontal band saw in the Horizontal Mitre Cutting Bandsaws category and part of the Semi-Auto Bandsaw product group. Designed for heavy cutting applications, it delivers precise cuts on steel, cast iron, and other materials with its robust dual-column construction and reduced vibrations that enhance accuracy and speed. This advanced model features infinitely variable cutting speeds from 20 to 100 m/min, a powerful, low-maintenance motor, and a standard hydraulic workpiece clamping system to ensure reliability and efficiency. With the HB 460 L, operators benefit from precise saw blade tension adjustments via a pressure gauge, a removable coolant reservoir for easy maintenance, and an optical sensor for automatic stroke height adjustment. The machine’s versatility extends to including miter cutting capabilities with a 45° swiveling vise, making it ideal for both sections and solid materials. For an optimal cutting experience with the Horizontal Mitre Cutting Bandsaws product group, request a quote for the HB 460 L today and see how KNUTH can enhance your machining operations. Lodpfju Abvdox Ad Nehb

Condition: new, The SBS 255, part of the Horizontal Mitre Cutting Bandsaws category and the Semi-Auto Bandsaw group, is a compact, robust machine designed for efficient machining of small batches. This universal workshop band saw features a one-piece cast-iron saw frame that is torsion-proof and swivels 60° to the right and 45° to the left, allowing for versatile cutting options. With a rigid vise equipped with lateral slide and long guideways in the movable jaw segments, users can achieve precise cuts on various workpiece sizes, thanks to the combination of carbide jaws and adjustable ball bearing guides. The SBS 255 operates quietly, ensuring short machining times and easy handling, which leads to increased productivity. Additionally, it is powered by a strong motor for continuous operation and comes with a high-capacity coolant system. Included with the saw are essential tools like a saw blade, base, pressure gauge, and operator instructions. KNUTH provides the quality assurance you expect, so order online today to enhance your workshop with the SBS 255 Horizontal Mitre Cutting Bandsaw. Lhjdpjuyiqdofx Ad Njb

Year of construction: 2014, operating hours: 5,316 h, condition: ready for operation (used), Main Drive Spindle speed range 4000 Spindle bore 52 mm Number of axis 3 Movement X-Axis Movement 213 mm Y-Axis Movement ±51 mm Z-Axis Movement 572 mm Turret Lhsdox D Nzpspfx Ad Nsb Tool taper VDI/BOT Tools Number of station 12 This 3-axis HAAS ST-20Y was manufactured in 2014. It features a CNC lathe with C and Y-axis capabilities, a spindle speed of 4000 rpm, and a chuck size of 8 inches. Additional features include a 12-station turret, chip conveyor, and a programmable hydraulic tailstock. Ideal for precision turning operations. If you are looking to get high-quality turning capabilities consider the HAAS ST-20Y machine we have for sale. Contact us for more information about this machine. Application Types Turning

Year of construction: 2020, condition: ready for operation (used), General Data Machine weight 3850 kg Measurements height 1921 mm Control Unit Brand SIEMENS Model SINUMERIK 828D Dimensions Machine Length 2880 mm Main Drive Number of axis 3 Spindle Speed 6000 RPM Spindle motor power 15 kW Movement X-Axis Movement 205 mm Z-Axis Movement 560 mm Y-Axis Movement 105 mm Technical Specification Driven Tools yes This 3-axis DOOSAN LYNX 2100LYA was manufactured in 2020, featuring a chuck size of 6 inches, a maximum turning diameter of 300 mm, and a length of 510 mm. It boasts rapid traverses of 30 m/min on the X-axis and 36 m/min on the Z-axis, with a high spindle speed up to 6000 rpm. Consider the opportunity to buy this DOOSAN LYNX 2100LYA horizontal turning machine. Contact us for more information about this machine. Application Types Turning Lodpfxsx D Dkre Ad Njhb

Condition: ready for operation (used), Year of construction: 2019, operating hours: 3,728 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 213 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 572 mm, spindle motor power: 149,000 W, bar diameter (max.): 64 mm, controller manufacturer: HAAS, controller model: NGC, number of slots in tool magazine: 12, swivel angle C-axis (max.): 360 °, number of axes: 4, Control Unit Brand HAAS Model NGC Main Drive Spindle bore 88.9 mm Number of axis 4 Spindle Speed 4000 RPM Spindle motor power 149 kW Movement X-Axis Movement 213 mm Z-Axis Movement 572 mm Lhjdpsx D Hn Tofx Ad Neb Y-Axis Movement 51 mm C-Axis Movement 360 º Tools Slots in storage 12 Technical Specification Max. Bar Diameter 64 mm Driven Tools yes This HAAS ST-20Y lathe, manufactured in 2019, features a Y-axis, tailstock, automatic tool probe, and chip conveyor. With a spindle speed of up to 4000 rpm and driven tools supported by a C-axis, it offers strong capabilities for complex machining. If you are looking for a high-quality turning solution, consider the HAAS ST-20Y we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2008, condition: ready for operation (used), General Data Machine weight 6300 kg Control Unit Brand FANUC Model 18i-TB Main Drive Spindle speed range 3500 Spindle motor power 22000 W Movement X-Axis Movement 245 mm X-Axis Rapid Traverse 22 m/min Y-Axis Movement 102 mm Y-Axis Rapid Traverse 8 m/min Z-Axis Movement 1270 mm Z-Axis Rapid Traverse 24 m/min Additional Equipment Documentation/manual Lhsdpfjx D H Aqex Ad Neb This 3-axis DOOSAN Puma 2500XLY horizontal turning machine was manufactured in 2008. It offers robust performance for precision turning operations. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2500XLY machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2012, operating hours: 6,500 h, condition: ready for operation (used), Main Drive Number of axis 3 Media Chip conveyor Yes Lhjdpsx D D Uwjfx Ad Nob Additional Equipment KITAGAWA Hollow Clamping Device with KITAGAWA SS1881K21 for the main spindle 15 bar pump with filter Coolant system with increased pressure (5 bar) Hinged belt conveyor, right-hand discharge Integrated parts catcher for the main spindle Interface for bar feed, LNS Double foot switch with protective cover Signal light (red, yellow, green) Tool overhang length 100 mm for driven Y-axis travel + Tool holder package Transformer 45000 VA This 3-axis DMG Mori Seiki NLX2500Y 700 was manufactured in 2012. It features a KITAGAWA Hollow Clamping Device, enhanced coolant system at 5 bar, and an integrated parts catcher. Additional attributes include a hinged belt conveyor, I/F for bar feed, and a signal light system. Ideal for turn-mill operations, consider the opportunity to buy this DMG Mori Seiki NLX2500Y 700 horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: used, Horizontal Machining Center Kitamura HX500G Ledjm E Ttbepfx Ad Nohb Main Technical specifications: Spindle Max. Speed: 12000 RPM Max. diameter of tools: 125mm Max. weight of tools: 20 kg Table work area: 630x630mm Max. work size: 1000x1000mm Table load capacity: 1200kg X-axis: 1050 mm Y-axis: 850 mm Z axis: 900 mm Spindle nose to table distance: 130 - 1030 mm Available. Fast delivery

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram Lhodpfx Asx A U Ncod Nsb o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: used, Year of construction: 1999, x-travel 1900 mm Lodpfsrpa N Iex Ad Nshb y-travel 800 mm z-travel 800 mm control 426 Heidenhain weight of the machine ca. 12 t

Year of construction: 2017, condition: good (used), functionality: fully functional, We offer this good K.M.E. Auto weight Baler & Shreader, year of construction 2017. • Auto-weigh 20kg chamber • Hydraulic baler press • Bagging chute • Full control panel Lodpfx Adex U Dg Ro Nohb • Includes dedicated dust-extraction unit • Flat-bed feed • High-speed cutting rotor • Extraction-ready outlet • Fully operational If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 1975, functionality: fully functional, Used Table Type Boring Mill / Horizontal Boring Mill TOS Varnsdorf W9 – including technical specifications Manufacturer: TOS Varnsdorf Model: W9 Machine type: Table Type Boring Mill / Horizontal Boring Mill Condition: Used Availability: Immediately Machine Description For sale is a used, robust TOS Varnsdorf W9 table type boring mill / horizontal boring mill – ideal for drilling, boring, milling, and tapping operations on medium-sized workpieces in machinery and plant engineering. The machine was last in operational use and is excellently suited for productive manufacturing or as a backup machine. Technical Specifications Spindle & Drive Spindle diameter: 90 mm Spindle extension travel (W-axis): approx. 710 mm Spindle taper: Morse 5 (MT-5) Spindle speed: 0 – approx. 1400 rpm (depending on gearbox/version) Main motor power: approx. 7.5 kW Travels Cross traverse (X-axis): 1000 – 1250 mm Vertical travel (Y-axis): 900 – 1120 mm Longitudinal travel (Z-axis): 800 – 1400 mm Lsdpfx Aox U Dd Ajd Nshb Spindle quill stroke (W-axis): approx. 710 mm Table & Capacity Table size (clamping surface): approx. 1000 x 1120 mm Max. workpiece weight / table load: approx. 3000 kg Machine Dimensions & Weight Machine dimensions (L × W × H): approx. 3900 × 2500 × 2650 mm Machine weight (net): approx. 9000 – 11500 kg

Condition: new, Year of construction: 2026, Standard Features Torsion-resistant, robust cast iron saw frame Powered chip removal brush Powerful industrial worm gear motor Automatic shut-off after cutting Mechanical saw blade tensioning with electrical blade breakage monitoring Slidable quick-action vise Lhsdpefg Eq Rofx Ad Nsb Hydraulic saw frame lowering with rapid traverse function (infinitely adjustable) Electric coolant pump Precision carbide saw blade guides, ground (adjustable) Large round support table, rotates during miter cuts, miter indicator (scale) on the operator side Direct switching from manual to lowering mode Easily removable chip collection tray 500 mm material stop with scale Including saw blade with 4/6 combi toothing. Technical Specifications Motor: Three-phase 400 V, pole-changing, 1.1/1.5 kW Blade dimensions: 2720 x 27 x 0.9 mm Flywheels: 300 mm Ø Cutting speed: 40/80 m/min Vise clamping width: 275 mm Working height: 978 mm Weight: 370 kg Machine dimensions (W x D x H): 1150 x 1588 x 1477 mm Cutting area: see data sheet Please inquire about additional accessories. DELIVERY: FREE DOOR (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2026, High-performance band saw machine with hydraulic saw frame lowering (control valve) for miter cuts from 0° to 60° right / 45° left Torsion-resistant, robust cast saw frame Powered chip removal brush Cut feed via frame weight Miter angle adjustment and clamping manual Quick-action, movable vise Electric coolant pump Precision-ground, carbide saw band guides (adjustable) Large-diameter round support table, rotates with the miter, miter scale visible from the operator side Easily removable chip tray Material stop 500 mm with scale Includes combination-tooth saw band 4/6. Ledpfx Aoxlhmyed Nohb Technical Data Motor: three-phase 400 V, 1.5 kW Saw band dimensions: 2720 x 27 x 0.9 mm Flywheel diameter: 325 mm Cutting speed: 20-120 m/min Vise clamping range: 320 mm Working height: 760 mm Weight: 390 kg Machine dimensions (W x D x H): 1480 x 1700 x 2000 mm

Condition: new, Year of construction: 2026, Fully hydraulic lowering and raising function of the saw frame Hydraulic opening and closing of the vice Shutdown after cutting, return of the saw arm to its starting position Torsion-resistant saw frame made of cast steel (multi-ribbed) Hydraulic short-stroke cylinder for the vice Lhsdpscl Tc Ajfx Ad Njb Precision-ground carbide saw blade guides, adjustable Electric coolant pump Manual blade tension with display, including electric saw blade and cutting pressure monitoring Hydraulic vice (opening and closing) Revolving chip removal brush Large, solid round support table, rotating for miter cuts with a predefined cutting channel, manual miter adjustment, readout via scale 500 mm material stop with scale Including combi-toothed saw blade 4/6 Machine color: - Saw frame RAL 7035 - Machine body RAL 7005 Motor: 400 V three-phase, frequency-controlled, 1.5 kW Saw blade dimensions: 2910 x 27 x 0.9 mm Flywheel diameter: 325 mm Cutting speed: 20-120 m/min. Vice clamping width: 320 mm Working height: 760 mm Sawing range: at 0° = round diameter 250 mm, square 240 x 240 mm, rectangle 320 x 190 mm Machine dimensions (W x D x H) 1480 x 1700 x 2000 mm Weight: 420 kg Please inquire about additional accessories. DELIVERY: FREE (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: used, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller model: Mitsubishi, Equipment: chip conveyor, rotational speed infinitely variable, For sale: Yasda Csepel YBM-90N horizontal machining center as shown in the photos. The machine is equipped with a twin-pallet changer, and the table is rotatable 360 degrees. Specifications: Lsdpfxox Uz Ife Ad Njhb Table size: 1000 x 1000 mm Travels: X: 1200 mm, Y: 1000 mm, Z: 1000 mm Twin-pallet system Mitsubishi CNC control

Condition: used, Year of construction: 2014, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, Doosan HP5100II Horizontal Machining Center Lodpfx Ajx Sq Uvod Njhb Year of manufacture: November 2014 Control: Fanuc 31i Travels: X-axis: 850 mm Y-axis: 700 mm Z-axis: 750 mm B-axis: 0.001° Automatic pallet changer Table: 500x500 mm Spindle max. 14,000 rpm Spindle taper: BT40 Tool magazine for 60 tools Renishaw workpiece measuring probe Chip conveyor Through-spindle coolant (IKZ)

Condition: ready for operation (used), Year of construction: 2012, Brand: DIXI Model: 60 Sh Year of manufacture: 2012 Pressing force: 60 tons Voltage: 400V Maximum bale weight: 340-500 kg Ljdjx Ux Hxepfx Ad Nohb Bale dimensions: approx. 120 x 80 x 80-110 cm Machine weight: 2,400 kg Machine dimensions: 190 cm wide x 140 cm deep x 230 cm high Filling opening dimensions: 115 cm x 80 cm deep x 55 cm high Condition: Very good! Functionality checked. FLITS Rental & Sales service: With every machine, we supply a bundle of binding wire (120 wires). Need more bundles of binding wire? Request a quote with no obligation. FLITS Rental & Sales is your reliable partner for the sale and rental of high-quality machines for both businesses and private individuals. We focus on delivering efficient solutions in the areas of internal transportation, cleaning, waste processing, and working at height. At FLITS Rental & Sales, you will find a wide range of machines suitable for deployment in various sectors. See our advertisements for: waste balers for efficient waste management, electric pallet trucks/stackers for fast and safe internal transport, scrubbers for thorough and professional floor cleaning, forklifts in various designs suitable for different working environments. With FLITS Rental & Sales, you choose speed, clarity, and reliability. We think along with you, respond immediately, and ensure that you quickly have the right machine at your disposal. Visit our location You are very welcome to view the machines at our premises. We are located at: Schoterlandseweg 94, 8413NE Oudehorne, Netherlands. Visits are possible by appointment, so we can take the time to inform you thoroughly and show you the right machines. Contact Do you have questions or would you like to receive a no-obligation quote? Please feel free to contact us: We are happy to help you further. Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste Waste processing DIXI

Condition: used, Year of construction: 2019, total height: 2,450 mm, total length: 9,500 mm, total width: 2,400 mm, Empty weight: 5.000 kg Price: On request CNC SCM Morbidelli M100  Brand SCM Type Morbidelli M100  Year of construction 2019 Serial number AA100001570 Machining table dimensions 5510x1620 mm (LxW) 400 Volt / 50 Hz PRO-Speed safety system TEPCAD control panel with touchscreen colour display TBR14 linear tool changer (Y=1620 positions) FAST14 linear tool changer Air blower on electro spindle Guard rails X-Y axes Vacuum pump 150/300 m3/h  50/50 Hz 5-axis unit ‘JQX’ version, 13.5 kW Fixed pod 145x145 H=75 mm Rotating pod 145x55 H=75 mm Clamp for 8 rails TV FLEX / TV FLEXDRIVE / TV FLEXMATIC MULTIGRIP 90 round clamp (H83) for TV FLEX / TV FLEXMATIC Maestro connect: 1 year (gateway kit ‘plug&play’ included) SCM DIGITAL SOLUTIONS: MAESTRO CONNECT MAESTRO ACTIVE human-machine interface software (HMI) Maestro software for cnc programming Hardware key for Maestro cnc Advanced Maestro 3D module Additional key for Maestro cnc (USB port) Windows 10 embedded 64-bit operating system Console with integrated PC ‘eye-M PRO’ Axis movement  Maximum vectorial speed in rapid traverse XY axis 56 m/min Stroke of the Z axis 180 mm Routing unit Motor power 5.5 kW  Lhedpswnibtsfx Ad Njb Speed 4000 rpm Tool changer up to 44 locations Air consumption 4430 m3/h Air speed 25 m/sec Connection diameter 250 mm Total dimensions 9700x5020x2650 (LxWxH) - Year: 2019 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AA10001570 - Transport dimensions: 9500mm x 2400mm x 2450mm (l x w x h) - Transport weight [kg]: 5000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2014, Empty weight: 4.000 kg Price: On request - Machine available from: 2026-01-26 - Year: 2014 - Documentation available: No Lhodpfxjxr Evlo Ad Nob - CE marking present: Yes - CE certificate present: No - Serial number: 89867 - Number of milling spindles [pcs.]: 1 - Type milling table: Flat table - Tool clamping system: HSK-F63 - Drilling unit present: Yes - Saw unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: BiesseWorks - Safety feature: Safety mat - CNC options: Label machine, Loading system, Unloading system - Table length [mm]: 3600 - Table width [mm]: 1800 - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: good (used), Year of construction: 1999, functionality: fully functional, Year of manufacture: 1999 Width: 1200 mm Length: 1200 mm Number of axes: 5 Tool holder: SK50 Lhjdex Uwtkspfx Ad Nob Spindle speed (RPM): 3,500 Workable materials: Steel, aluminum, titanium, graphite, copper, invar, composite, Delrin, Peek

Condition: good (used), Year of construction: 2007, travel distance X-axis: 750 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 725 mm, CNC control Sinumerik 840D NC-rotary table B-axis automatic tool changer for 320 tools Lsdpfx Asq Ui Hqjd Nshb pallet changing device, 2 pallets 500 mm x 500mm coolant through spindle device IKZ (80 bar) chip conveyor coolant device Technische Daten / technical details: X-Weg längs / X-travel longitudinal 750 mm Y-Weg senkrecht / Y-travel vertical 750 mm Z-Weg quer / Z-travel cross 725 mm B-Achse / B-axis 360 ° Spindelaufnahme / spindle taper HSK 63A Drehzahlbereich Spindel / spindle speed 50-10000 Upm /rpm Werkzeugplätze / tool places in changer 320 Vorschub / infeed 60000 mm/min Eilgang / rapid feed 60 m/min Antriebsleistung Spindel 40/100% ED / drive capacity spindle 40/100%ED 37/24 kW Gewicht der Maschine ca. / weight ca. 15000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.