Used Horizontal Baler for sale (6,559)

Condition: ready for operation (used), Year of construction: 1997, - USED - 4-AXIS HORIZONTAL MACHINING CENTRE WITH PALLET CHANGER X-AXIS TRAVEL: 1500 mm Y-AXIS TRAVEL: 1200 mm Z-AXIS TRAVEL: 1250 mm SPINDLE: 10-4000 rpm; 40 kW; HSK-A 100 PALLET: CONTINUOUS ; 1000X1000 mm; 1-500 rpm MAX ADMITTED LOAD: 2000 Kg TOOL MAGAZINE: CHAIN-TYPE ; 161 POS Nwjdpfx Afsh Hfrnoajf CONTROL UNIT: SIEMENS 840 C OVERALL DIMENSIONS: 8500 x 4800 x 4800 mm ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER NOTE: COMPLETELY OVERHAULED MACHINE; HORIZONTAL AND VERTICAL AUTOMATIC HEAD; TURNING TABLE

Condition: used, Year of construction: 2008, Technical details: x-travel: 700 mm y-travel: 700 mm z-travel: 700 mm turning speeds: 18.000 1/min max. torque on the spindle: 110 / 84 Nm tool taper: SK 40 control: HEIDENHAIN iTNC 530 tool change unit: 180 fach size of pallet: 500 x 500 mm mm max. workpiece weight: 600 kg spindle: 34 / 28 kW rapid traverse: 60 m/min total power requirement: 68 kVA Nwedpoy E Np Sefx Afaof weight of the machine ca.: 10,5 t dimensions of the machine ca.: 9,5 x 7,5 x 3,4 m horizontal machining center with linear drives,, NC-roundtable, pallet pool RS 10 for totally 12 pallets, monitor for workpiece setting-up device, high pressure coolant through spindle 40bar, internal air blast supply, mode 4, hydraulic clamping 2/4 for workpiece setting-up device and working table, BLUM laser, oilmist suction, 3D touch probe TS 649, tool-breackage control, mechanical, SDS spindle diagnosis system, flush gun, el. handwheel, chipconveyor, approx. 112.000 h "machine on", approx. 79.500h "spindle on", *

Condition: used, Year of construction: 2020, Technical details: cutting diameter: 27 mm saw band length: 2910 mm saw band width: 0,9 mm span width: 320 mm dimensions of saw-band: 2910 x 27 x 0,9 mm band speed: 20 - 120 m/min electrical connection: 400/50/60 V / Hz. total power requirement: 1,5 kW Nsdpfxsy E Hyno Afajwf machine weight approx.: 390 kg dimension machine xH: 1480 x 1700 x 2000 m

Condition: new, Year of construction: 2025, Schnittbereich rund: 530 mm Cutting area, square (W x H): 530 x 530 mm Smallest size that can be cut: 20 x 20 mm Clamping range: 0 - 530 mm Bundle cutting range (min. W x H - max. W x H): 145 x 110 - 270 x 200 mm Shortest length of cut piece : 5 mm Shortest remaining piece length in automatic mode*: 190 mm Nodjwqchlspfx Afaewf Shortest remaining piece length in single cut: 20 mm Length: 2220 mm Width including chip conveyor: 3530 mm Height: 2530 mm Weight of machine approx.: 3700 kg Electrical connected load: 11,5 kW Saw motor power: 7,5 kW Hydraulic motor power: 1,5 kW Cutting speed continuously adjustable: 20 - 80 m / min Feed speed of the saw: 1 - 300 mm / min Automatic material feed length, single stroke: 500 mm Length of automatic material feed, multiple strokes: 9999 mm Dimensions of the saw blade: 6300 x 54 x 1,6 mm Standard configuration Fully enclosed protection according to CE standardJLH-EHASaw MasterCE Electrical safetyPermanent magnetic synchronisation. MotorSaw arm Anti-collision detectionLED work lightLaser line projectionSaw blade breakage detectionSawing depth controlHMI+buttonsInverterDeviation detectorHydraulic belt tensionerVice differential pressure valvesAutomatic chip conveyor (spiral)Hydraulic belt guide tensionerVice pressure regulatorMotorised chip brushCooling fan for hydraulicsAutomatic lubrication deviceWork table with rollersHydraulic feedMain drive Precision gearboxSplit vice clampingMovable guide arm hydraulically clampedChip container 40(L)Tool box (wire brush, levelling pads, spare paint)One-piece saw blade

Year of construction: 2026, condition: new, The 2000L horizontal ribbon mixer is equipped with a special ribbon agitator located in the center of the tank along its entire length. The entire machine is made of 304 stainless steel. Njdpfxsy Ew Tfj Afaswf - Capacity: 2000L - Motor: 7.5kW, 3-phase, 50Hz - Machine weight: 850kg - Dimensions: (L 2880 x W 1200 x H 2200mm) -we offer mixers from 200L to 3500L The mixer's interior and ribbon itself are polished to a high gloss, significantly simplifying and accelerating mixing, as well as facilitating cleaning after use. These mixers are used for mixing bulk, liquid, or semi-liquid materials. Primarily used in the chemical, food, pharmaceutical, agricultural, and construction industries.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details grinding length 600 mm grinding width 400 mm workpiece height 375 mm Additional information CNC Precision Surface and Profile Grinding Machine Grinding area: 600 x 400 x 375 mm Grinding spindle motor: 3.7 kW Table drive: hydraulic Cross-axis drive: electromechanical Grinding wheel: 300 x 50 x 76.2 mm Peripheral speed: 10 - 32 m/s Electromagnetic plate: 600 x 400 mm with holding force control and automatic magnetic pole reversal for demagnetizing Features: Partially enclosed, open-topped loading compartment with a sliding door Nwedoy Ew N Hepfx Afasf Cleaning kit for cleaning the work area with hand-held impulse nozzle Holder for prism arm with single-point diamond, MK 0 Grinding spindle speed control with V-constant controller Universal paper filter unit UPF 100, tank capacity approx. 280 liters Coolant pump: 20 liters/minute at 1.5 bar With mud box Machine light Grinding wheel flanges

Condition: used, Year of construction: 1998, Technical details: x-travel: 630 mm y-travel: 600 mm z-travel: 650 mm control: MSC 502 (Fanuc 16) Spindle RPM: 12000 1/min spindle drive: 22 / 18,5 kW rapid travel x/y/z: 32 m/min Pallet dimension: 500x500 mm numbers of pallets: 2 table load: 0,5 t working diameter: max. 610 mm Number of tool station: 60 BT40 Nsdpfx Asy Er Tgjfaswf max. tool length: 360 mm max. tool weight: 12 kg tool changing time: 1,3 sec B-axis positioning (non continuous): 1 total power requirement: 50 kVA weight of the machine ca.: 14 t dimensions of the machine ca.: 3,3 x 5,8 x 3,2 m Accerories Chip conveyor spindle load monitor Typ C Coolant gun Chamfering and corner rounding Tool life management Interface for coolant through the spindle This horizontal machining center comes with a pallet changer with 2 pallets, and has the following options: ATC 60 tool stations, High pressure coolant trough spindle interface, *

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 7700 € Nedpfswirybex Afaewf 148.61 € Schwenkrahmen 2730x27x0,9 mm 35/70 m/min 230 mm 230 mm 320x130 mm rund 210 mm, quadrat 190 rund 130 mm, quadrat 100 rund 180 mm, quadrat 150 805 mm 0.37 kW 1.3 kW 0.12 kW 1350 mm 700 mm 1300 mm 430 kg swivel frame infinitely adjustable lowering with hydraulic cylinder hydraulic lifting of the saw frame mechanical vice with quick clamping coolant equipment machine base chip collecting tray user manual in GERMAN or ENGLISH OPTIONS: Roller tables and band saw blades on request

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 29800 € 569.18 € Schwenkrahmen 3660x27x0,9 mm 15-120 m/min 320 mm 320 mm 350x320 mm rund 170 mm, quadrat 150 rund 260 mm, quadrat 220 rund 320 mm, quadrat 280 740 mm 1.1 kW 2.2 kW 1 kW 0.12 kW 2120 mm 2100 mm Nsdpfx Aswirhljfaswf 1810 mm 1810 kg NC control panel servo feed with ballscrew spindles hydraulic vice hydromechanical blade tension inverter coolant pump saw blade blade brush security switch height adjustment user manual in GERMAN or ENGLISH OPTION: hydraulic blade tentioning

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 32000 € 611.2 € Doppelsäulenführung 5000 x 34 x 1,1 mm mm 20 - 120 m/min 330 mm 330 mm 350 x 330 mm 845 mm 1.1 kW 3 kW 0.12 kW 2815 mm 1935 mm 1855 mm 2560 kg Servo feed with 700 mm stroke Cutting length up to 9,999 mm (multiple feeds) Omron touchscreen, 50 different cutting lengths and 30 programs can be saved Linear guide 41 mm saw blade Control panel Hydraulic vice Hydromechanical blade tension Heavy duty gearbox Coolant device Sensitive pressure Nwedpjwiq Hgjfx Afajf Inverter for stepless blade speed Chip brush Optical height adjustment Chip conveyor Operating instructions in GERMAN or ENGLISH

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 9400 € 181.42 € Schwenkrahmen 2730x27x0,9 mm 35-70 m/min 230 mm 230 mm 240x230 mm 590 mm 0.37 kW 1.3 kW Nwjdjwiqw Eopfx Afasf 0.12 kW 1700 mm 800 mm 1500 mm 530 kg blade brush control panel height adjustment switch hydromechanical blade tension inverter mechanic top clamping material length stop coolant pump saw blade security switch 1,2 meter roller table users manual in GERMAN or ENGLISCH

Condition: new, functionality: fully functional, machine/vehicle number: Flowpack, Year of construction: 2023, - short delivery time, less than 10 weeks! - Model name: Rotection PU flow-wrapping machine Features: Steel frame/stainless steel construction, Fixing of the unwinder by hand without compressed air, Automatic roller centering for precise application, Automatic stop for empty products (no product - no bag), Simple touchscreen operation via color symbols Continuous feeding of products via sensor control, pressure mark sensor included, safety covers 3-sided welded seam packaging (fin seam), longitudinal sealing on the underside of the bag, rotating transverse sealing system Can be combined with upstream and downstream machines, Customer-specific modifications / designs on request Additional options (on request and at extra cost): Thermal transfer printer, e.g. best-before date, print width up to 60 mm, stainless steel finish/lacquering, cooling applications for ice cream packaging, zig-zag knife, Euro hole punch etc., applications for shrink films (flow shrink), gas flushing units for protective atmosphere (extend product shelf life), automatic product feed systems, intermittent insertion systems, perforation units (tear strip) for easy opening, length-dependent product processing by photocell scanning Horizontal production orientation Conveyor system either chain conveyor or belt conveyor, length as required Film feed from below Flexible and fixed forming shoulder Operator display 10" touchscreen with memory functions, swivel arm for convenient operator handling Drives & control 8 servo motors and PLC control Packaging length 120-600 mm Packaging width 70-250 mm (depending on film width) Packaging height max. 80 mm (depending on forming shoulder) Speed 25-100 bags/min Film width 200-600 mm Consumption approx. 7 KW Power supply 220-240 V / 50 Hz / 1-phase Machine weight approx. 1000 kg Njdsq Ikfmopfx Afaewf Machine dimensions approx. 5230 x 1380 x 1460 mm System material 304 stainless steel Pressure mark sensor Yes External compressed air required Yes Printer holder at extra charge Delivery time Current delivery time less than 10 weeks

Condition: new, functionality: fully functional, Year of construction: 2023, - In stock, unit is available! - The Rotection flowpack machine is suitable for packaging various products. A large operating display (HMI) ensures easy access to necessary data, such as tubular bag length. Model designation: Rotection tubular bag machine Operating display: 6.8" display Drives: Servo Packing length: 40-400mm Packaging width: 35-160 mm (depending on film width) Packing height: dependent on form shoulder Speed: 80-100 bags/min. in continuous operation Speed: up to 70 bags/min. Intermittently Film width: 90-400 mm Power consumption: 5 KW Power supply: 220-240 V / 50 Hz / 1-phase System weight: approx. 400 kg System dimensions: approx. 4000 x 930 x 1370 mm Error rate: < 5% Nwodpfxoinwi Ho Afajf *The above information refers to the model: RMFP70. This is a horizontal packaging machine. In the picture gallery you will find various models from our range of systems. Of course we offer you state of the art Box-Motion tubular bag systems. In order to be able to offer you the right packaging system for your requirements, our engineers are available to advise you. Of course, we will supply you with suitable mounting frames for the use of thermal transfer printers, or we will be happy to offer you a suitable system. We would be happy to carry out a test with your product in advance in order to offer you the right form shoulder and to be able to make a statement on the performance.

Condition: excellent (used), Year of construction: 2015, operating hours: 43,000 h, functionality: fully functional, machine/vehicle number: 19978, travel distance X-axis: 660 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller manufacturer: Fanuc, controller model: 30i, workpiece height (max.): 850 mm, workpiece diameter (max.): 700 mm, workpiece weight (max.): 400 kg, operating hours of spindle: 7,000 h, spindle mount: MK 4, number of spindles: 1, This machine is an excellent production machine. For several reasons, we have to part with this machine earlier than planned, as we need to install a 5-axis machine in its place. Otherwise, we would certainly continue using it for many more years. Nsdpfx Asywgglsfajwf

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC-Steuerung Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table Njdpfx Asx Hn D Rsfajwf - Clamping hydraulics The machine can be viewed under power by appointment.

Condition: good (used), Year of construction: 2017, Ref. -No.: 10596 Manufacturer: HELLER Type: H - 2000 Year of construction: 2017 Type of control: CNC-Steuerung Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: 56XXX X-Travel: 630 mm Y-Travel: 630 mm Z-Travel: 630 mm B-Axis: 0,001 ° Table Load: 500 kg Max. Tool Length: 350 mm Max. Tool Diameter: 160 mm Tool Taper: HSK 63 Numbers Of Tools In Magazin: 80 Turning Speeds: 16000 RPM Tool changer: Doppelgreifer Max. Workpiece height: 850 mm Max. Torque: 95 Nm Rapid Travel X/Y/Z: 60 mm / min Rapid Traverse X-Axis: 80 m / min Rapid Travel Y-Axis: 80 m / min Rapid Traverse Z-Axis: 90 m / min Drive Capacity - Spindle Motor: 40 kW Internal cooling: 50 bar Numbers Of Pallets: 2 Size Of Pallet: 400 x 500 mm spindle running time: 1000 H Operating hours: 3000 H Workpiece interference circuit max.: 720 mm Media interface: 5 - fach Further information: - Equipped with NC rotary table. - State-of-the-art spindle technology. - Ideal for precise machining tasks. - Spindle hours: 1000. - Pallet can be rotated manually 4 x 90 Nwjdpfjx Hn D Dex Afasf - Hydraulic pressure 200 bar - Quick drill breakage check Machine can be viewed under power by arrangement

Condition: good (used), Year of construction: 2011, Ref. -No.: 10565 Manufacturer: TOYODA Type: FH 630 SX Year of construction: 2011 Type of control: CNC-Steuerung Control: Fanuc 31i - A Storage location: Halberstadt Country of origin: Japan Serial no.: NS3XXXX X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 850 mm B-Axis: 360 ° Distance Spindle /Table: 200 - 1050 mm Max. Workpiece Weight: 800 kg Max. Tool Weight: 27 kg Max. Tool Length: 545 mm Max. Tool Diameter: Ø120 mm Max. Size Of Workpiece Lxwxh: Ø 1000 x 1000 mm Tool Taper: BT - 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 6000 RPM Rapid Travel X/Y/Z: 60 mm / min Tool to tool: 2,4 sec Machine length: 7000 mm Machine width: 3500 mm Weight Of The Machine Ca.: 20,1 t Pallet height: 1200 mm Positioning (X, Y and Z axes):: + - 0,003 mm Repeatability (X, Y and Z axes):: + - 0,0015 mm Payload pallet: 800 kg Axial: 14700 N Further information: - Cutting feed (same for X-, Y- and Z-axis): 0.001 - 30m/min - Distance between spindle center and upper edge of the area: 100mm - 900mm Nsdpsxvw I Isfx Afaewf - Table size range: 630 mm - Positioning of the lower table: 1 ° - Positioning of the rotary table: 0.001 ° - Tools used: SK 50 - Operating oil: 53l - Slide lubricating oil / spindle head lubrication: 3.0 l - Coolant for spindle & ball screw head: 37l Machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10564 Manufacturer: TOYODA Type: FH 630 SX Year of construction: 2008 Type of control: CNC-Steuerung Control: Fanuc 31i - A Storage location: Halberstadt Country of origin: Japan Serial no.: NS2XXX X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 850 mm B-Axis: 360 ° Max. Workpiece Weight: 800 kg Max. Tool Weight: 27 kg Nwedjxvw Izepfx Afaef Max. Tool Length: 545 mm Max. Tool Diameter: Ø 120 mm Max. Size Of Workpiece Lxwxh: Ø 1000 x 1000 mm Tool Taper: BT - 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 6000 RPM Machine length: 7000 mm Machine width: 3500 mm Weight Of The Machine Ca.: 20,1 t Further information: - Equipped with IKZ and chip conveyor - NC rotary table 360,000 * 0.001° Machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 2012, Ref. -No.: 10558 Manufacturer: YOU JI Type: HMC 1200 BP Year of construction: 2012 Type of control: CNC-Steuerung Control: FANUC Series 18i-MB Storage location: Halberstadt Country of origin: Taiwan X-Travel: 1800 mm Y-Travel: 1500 mm Z-Travel: 1360 + 990 mm B-Axis: 360 ° W-Axis: 700 mm Table Dimensions (Lengthxwidth): 1200 x 1400 mm Table Load: 5.000 kg Max. Tool Weight: 25 kg Max. Tool Length: 400 mm Max. Tool Diameter: 125 mm Spindle Speed: 30 - 3.500 RPM Numbers Of Pallets: 2 Further information: 4-axis simultaneous machining IKZ (internal spindle cooling) AKZ (external spindle cooling) Synchronized walking (rigid thread cutting) Renishaw RMP60 workpiece probe (radio) Number of pallet changers for automatic pallet change: 2 Size: 1200 x 1400 mm Tool magazine, number of tools: 60 The machine is currently in production and can be viewed by appointment. Nodpfx Asxxpbxsfaowf

Condition: used, machine/vehicle number: 17041, Year of construction: 2019, operating hours: 6,596 h, load capacity: 1,200 kg, lifting height: 790 mm, construction height: 1,375 mm, fork length: 1,200 mm, front tire size: , rear tire size: , overall weight: 954 kg, enginetype: Electric, manufacturer: Still Nedpfx Asy Hnhvefaswf

Condition: used, machine/vehicle number: 17040, Year of construction: 2019, operating hours: 5,801 h, load capacity: 1,200 kg, lifting height: 790 mm, construction height: 1,375 mm, fork length: 1,200 mm, front tire size: , rear tire size: , overall weight: 954 kg, enginetype: Electric, manufacturer: Still Nedpfx Ajy Hnhpofajwf

Condition: used, Year of construction: 2001, grinding length 600 mm grinding width 400 mm workpiece height 375 mm Nodpfxjy Ehw Is Afaewf digital readout 2 Achsen HEIDENHAIN table-size 650 x 350 mm max. table load 400 kg magnetic clamping plate 600 x 350 mm dist. center of grinding spindle - table 525 mm table travel longitudinal 650 mm table travel cross 350 mm table feed 2 - 28 m/min grinding wheel size 300 x 30 x 76,2 mm dressing device Kopfabrichter voltage 400 V total power requirement 11,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 2,20 x 1,70 x 2,25 m band filter unit 1,00 x 0,75 x 0,80 m electric cabinet 0,90 x 0,40 x 2,25 m - Serial-No.: 18090201 - Automatic vertical feed - Electric handwheel - HEIDENHAIN digital display, 2 axes - Head dresser - Coolant device - Belt filter system

Year of construction: 2007, condition: good (used), For Sale: Neat Ibonhart horizontal bag loader Brand: Ibonhart Model: APH6 Year: 2007 Nedpfxey Egyzs Afajwf - With automatic bag table system - Infeed and outfeed conveyors included - Adjustable distances set mechanically - Robust and reliable machine - Manual and documentation present - Central oil lubrication Maximum product dimensions: Length: 50 cm Width: 20 cm Height: 14 cm Capacity: 50 pieces per minute Machine inspection on location is possible. Price: €19,000 EXW Includes proper loading and packaging. Transport negotiable Subject to type and typographical errors.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 58900538, input voltage: 380 V, total width: 1,200 mm, total height: 2,300 mm, overall weight: 470 kg, total length: 850 mm, filling opening width: 830 mm, bale width: 830 mm, bale length: 600 mm, bale height: 650 mm, opening width: 830 mm, transport height: 2,300 mm, Machine fully functional, but the press plate is deformed and needs to be straightened (see photo). The machine is sold together with strapping bands for bundling the bales and a sack truck for transporting the bales. Pick-up only, no delivery and no warranty. Nwjdpfjy Hlg Nox Afaof

Condition: good (used), Year of construction: 2008, Ref. -No.: 10335 Manufacturer: HüLLER HILLE Type: NBH 170 Year of construction: 2008 Type of control: CNC Control: Sinumerik 840D pl Storage location: Halberstadt Country of origin: Germany X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 800 mm B-Axis: 360 ° Distance spindle center - table: 150 mm Table Dimensions (Lengthxwidth): 500 x 630 mm Table Load: 800 kg Max. Workpiece Weight: 40 kg Max. Tool Length: 650 mm Max. Tool Diameter: 325 mm Workpiece Diameter At Full Load: 100 mm Tool Taper: HSK - 100 Spindle Speed: RPM Rapid Traverse: 60 m / min Machine length: 9500 mm Nodpfxsy Edzvj Afaowf Machine width: 4500 mm Machine Height: 3500 mm Further information: Coolant system = 1250 l