Used Hoppe for sale (114)

Condition: ready for operation (used), * Brand: Kleemann * Type: dosing belt conveyor with hopper * A-A length: 5000 mm, Beltwidth: 800 mm.(used) Lodey Tm Ibopfx Aftjrp * Driving: gearbox approx 4 kW. * Dim. Hopper: 4000 X 1800 X 1150 mm.(new)

Condition: ready for operation (used), * Brand: Svedala * Model: steel apron conveyor with hopper * Dim. steel apron conveyor: A-A length 4200 mm * Beltwidth: 1300 mm. Ljdpfeywng Tex Aftjrp * Driving: E-motor 11 kW. * Dim. hopper: length 4700 mm - width 3600 mm - height 1900 mm. * Incl.: support chassis and discharge conveyor.

Condition: ready for operation (used), * Brand: Metso/Lokomo * Model: crusher with hopper and vibrating chute * Type: jaw crusher C125 * Feed Opening: 1250 x 950 mm * Incl.: hopper and vibrating chute * Incl.: Volvo diesel engine * Incl.: set of spare shear plates * Crusher: recently fitted with new hydraulic cylinders, bearings and swing shaft. Ljdjywncnjpfx Aftorp

Condition: ready for operation (used), * Brand: SBM Austria Lrjdpfxjywm Rdj Aftop * Model: hopper with vibrating chute and screening machine * Type: Grizzly * Dim. hopper: 6000 x 2500 x 1000 mm * Vibrating chute: length 3500 mm - width 1200 mm. * Driving: 2 pieces vibration motors of each 3,5 kW. * Surface screen: 2200 x 1200 mm. * Driving: 11 kW E-motor.

Condition: ready for operation (used), * Brand: Sandvik * Model: hopper with vibrating chute and screening machine * Type: Grizzly * Dim. hopper: 5500 x 3000 x 1100 mm * Dim. vibrating chute: 4500 x 1200 mm * Driving: 2 pieces vibration motors of each 6,2 kW Lodjywm N Hspfx Afterp * Dim. screen: 1200 x 1000 mm * Driving: 2 pieces vibration motors of each 0,8 kW

Condition: ready for operation (used), * Brand: Hazemag * Model: hopper with vibrating chute * Dim. hopper: 4000 x 2500 x 1350 mm Lsdjywm Dkepfx Afterp * Vibrating chute: length 4000 mm - width 1200 mm, * Driving: two pieces vibration motors of each 3 kW.

Condition: ready for operation (used), * Brand: Kleemann * Model: hopper with vibrating chute, screening machine and conveyor. * Dim. hopper: 4500 x 3000 x 1600 mm. * Dim. vibrating chute: 3500 x 1000 mm, * driving: two pieces vibration motors of each 6 kW. Lredpfx Afsywm Ddetjp * Dim. grizzly screening machine: 2000 x 1000 mm – 2 decks, * driving: 7,5 kW e-motor. * Dim. discharge conveyor: CC length=3000 mm, beltwidth = 1200 mm, * driving: 7,5 kW gearbox.

Condition: ready for operation (used), * Brand: Metso * Model: hopper with vibrating chute * Dim. hopper: 4500 x 2500 x 1300 mm Lodpfsywmylex Aftorp * Vibrating chute: length 4000 mm - width 1000 mm, * Driving: 15 kW E-motor

Condition: ready for operation (used), * Brand: ABM / Bergeaud Lrsdpfx Ajywmxuoftsp * Model: steel apron conveyor with hopper * Dim. steel apron conveyor: A-A length 10.000 mm * Beltwidth: 860 mm * Driving: 7,5 kW E-motor * Dim. hopper: length 3000 mm - width 2400 mm. * Height: 1100 mm leading to 900 mm. * Weight: appr. 19 Tons.

Condition: ready for operation (used), * Brand: ROXON * Model: hopper with vibrating chute * Type: MTS30/1040 * Dim. hopper: 4500 x 2000 x 1000/1800 mm. * Vibrating chute: length 4000 mm - width 1000 mm * Driving: 2 pieces vibration motors of each 1,8 kW. Ledpfx Ajywmtfeftorp

Condition: ready for operation (used), * Brand: Hasler * Model: dosing belt conveyor with hopper Lredpfxjywmlhj Aftop * A-A length: 2600 mm * Beltwidth: 950 mm * Driving : 3 kW gearbox * Dim. hopper: 1400 X 1400 X 1800 mm.

Condition: ready for operation (used), * Brand: Nordberg * Model: feeding table with hopper * ding table: 5000 x 1100 mm Lrsdpfx Aoywmkksftjp * Dim. hopper: 5500 x 3700 x 2500 mm * Driving: 22 kW E-motor

Condition: ready for operation (used), * Brand: Nordberg * Model: hopper with vibrating chute * Dim. hopper: 3000 x 3100 x 2000 mm * Dim. output hopper: 2500 x 1200 x 1500 mm. * Incl.: steel construction * Vibrating chute: length 6000 mm - width 1400 mm. * Driving: 2 pieces vibration motors of each 7,5 kW. * Incl.: steel construction Lrsdpfx Afoywmh Astjp * Tot. Weight: 28 Tons.

Condition: good (used), 1 x Alpina 330 Bowl Cutter 330 litres Lodpoytgwzofx Aftorp with loader and emptier

Condition: excellent (used), Feed hopper for a 1500 crusher. Ledpfx Afjvzq Aaetjrp Length: 2.90 m, width: 2.02 m, height: 2.35 m

Year of construction: 2021, operating hours: 1,513 h, condition: used, functionality: fully functional, overall weight: 11,500 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B205, Our robust FEED HOPPER is specifically designed for the precise dosing of challenging, hard-to-meter feed materials. Equipped with a plate belt, the hopper reliably handles abrasive or coarse-grained materials. With a capacity of 7 m³ and an optionally integrable leveling roller, the feed rate can be adjusted. Lsdpfx Asxta D Tsftsrp This module is part of our rental fleet.

Condition: used, Industrial shredder chopper This industrial shredder / bead chopper is a simple, robust, and versatile solution designed for the efficient volume reduction of your metallic waste, such as: - Metal scraps - Continuous welding beads - Other compatible metallic waste for industrial recycling. Its power allows it to shred, chop, and fragment various types of industrial waste, facilitating their compaction, waste management, and preparation for industrial recycling. SPECIFICATIONS Shredding: Designed to handle constant flows of metallic waste, optimizing your recovery and recycling operations. Blade access opening: A wide opening of 402 x 502 mm to facilitate the feeding of various materials. Blade configuration: Equipped with 1 blade shaft of 25 mm width, designed for effective and uniform chopping. Shaft rotational speed: Operates at 35 r.p.m., offering an optimal balance between shredding power and efficiency. Voltage: Prepared for standard 400/50 Volt/Hz connections. Lsdpfx Aoymaiqoftorp Weight: At 500 kg, this is a solid and durable machine, built for intensive industrial use. Blade access opening: 402 x 502 mm Number of blade shafts: 1 unit Blade width: 25 mm Shaft rotational speed: 35 r.p.m. Voltage: 400/50 Volt/Hz Weight: 500 kg

Condition: used, Year of construction: 2010, functionality: fully functional, overall weight: 1,300 kg, fuel type: electric, – Made in Germany – Year of manufacture: 2010 – Shredder equipped with a magnet for collecting metal parts Lrjdpsy S Tg Isfx Aftsp TECHNICAL SPECIFICATIONS: – Feed opening dimensions: 600 x 800 mm – Feed opening volume: 0.6 m³ – Main engine: 18.5 kW – Rotor diameter: 252 mm – Rotor speed: 90 rpm – Number of knives: 15 pcs – Knife dimensions: 40 x 40 mm – Screen size: 16 and 20 mm – Auto-reverse function – Hydraulic drawer: 160 mm – Chute for discharging wood chips, length: 2600 mm – Chute outlet height: 1450 mm – Chute diameter: 150 mm – Chute motor power: 0.75 kW – Weight: ~1300 kg

Condition: used, Year of construction: 2026, Special price - exhibition machine Technical specification WL 4 Hopper opening with log spacer 600 x 1,050 mm Hopper content 0.6 m³ Working width of the rotor 600 mm Diameter of the rotor 252 mm Drive power 18.5 kW Rotor speed 80 -120 rpm Number of knives 28 Type and size of knives concave / 40 x 40 mm, cutting reversible crowns Screen perforation 15-20 mm Painting WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Including: • Control cabinet* (Rittal) including electrical control (Moeller / Siemens) and star-delta start-up • Rubber vibration elements • V - rotor (patented) with knife pockets milled into the profile • Gear limit switch • Slider cycle • Slider half back • Log spacer hopper • 2. Knife series Storage location: Supplier Ljdjy D E U Iepfx Aftjrp

Condition: used, Year of construction: 2026, Special price – demonstration machine, Garbsen. Our WL 6 machine concept. The Weima high-performance shredder, with its flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into wood chips, achieving a significant volume reduction of the material, especially with bulky materials. Mode of operation: The machine is equipped with a large feed hopper and can be loaded via a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without requiring manual assistance. The hydraulically controlled slide feeds the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependent controlled. The internal slide guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are cardanically suspended to avoid transverse forces on the piston seals. The patented and profiled V-rotor, made of solid steel, has a diameter of 252 mm and operates with a rotor speed of 80 - 120 rpm. The concave, aggressive, and four-way rotatable knives/cutting crowns are located in milled knife pockets on special knife carriers. This patented system guarantees, through the resulting reduction in the cutting gap between the counter-knife and the rotor, a high throughput, low energy consumption, and an optimal discharge of the shredded material. The screen located under the rotor determines the chip size (10 - 100 mm). An optionally available, hydraulically opening screen basket is also available. The power transmission from the electric motors is via V-belts to a heavily dimensioned gearbox, which is attached to the rotor shaft on one side. Precise cutting at high throughput with a profiled V-rotor. The V-rotor, developed specifically by WEIMA, is universally applicable and made of solid material. Its aggressive material feed, with up to two knife rows, guarantees a high throughput with low power consumption. It can be equipped with hardened cutting knives made of steel with edge lengths of 30 mm and 40 mm. These can be repeatedly rotated when worn, which drastically reduces maintenance costs. Intuitive operation thanks to a Siemens PLC control with a touch display. To ensure that the electronics are optimally matched to the machine, we design, build, and wire our control cabinets ourselves. In doing so, we use only high-quality components – for example, from Siemens or Rittal. Intuitively operable touch screens guarantee quick adjustments. Functions such as adjusting the slide timing or stop ensure a high throughput. The built-in overload protection also prevents damage to the machine. Technical specifications WL 6: Feed opening 800 x 1,250 mm. Hopper capacity 0.9 m³. Rotor length 800 mm. Rotor diameter 256 mm. Drive power 22 kW. Rotor speed 90 rpm. Max. number of knives 42 pieces. Type and size of knives: concave / 40 x 40 mm, cutting crowns. Screen size 10-60 mm. Paint: WEIMA standard RAL 2022 / 7016. Connection value 400 V +/- 5% / 50 Hz. Weight approx. 1,600 kg. Including: - Control cabinet* (Rittal) incl. electrical control (Moeller / Siemens) and S Lsdpfsy D E Tdjx Aftjrp

Condition: excellent (used), Year of construction: 2021, Silos 120 x 120 x 141 cm [L x W x H] with a capacity of approx. 1000 l complete with Koch Technik plastic feeders for the central system, 3 pcs. 2008, 2010, 2021. Lrsdpfx Ajzl Szujftop

Year of construction: 2006, condition: used, No. 10036 Screw conveyor with feed hopper Van Beek KS250 Used, year of construction 2006 According to our customer / the previous owner, the machine is fully functional and can be viewed on site Stationary screw conveyor with feed hopper / dosing hopper / storage hopper for the controlled discharge and onward conveying of lightweight bulk materials and piece goods Hopper volume approx. 2 m3 Conveying capacity approx. 2 m3/h Screw diameter approx. 248 mm Screw pitch approx. 250 mm Screw speed approx. 10 rpm Labyrinth seal Motor power 3 kW Protection rating IP54 Chain drive Transport dimensions approx. 2800 x 1500 x 2125 mm LWH Weight approx. 1500 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Lodpfx Aezltwqsftjrp Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Year of construction: 1989, condition: used, functionality: fully functional, Grain Hopper Railway Wagons for Sale – Models 11-739 and 19-752 Container Flat Wagons for Sale – Models 13-470 and 13-9004 Railway Tank Wagons for Sale – Model 15-1443 SHORT DESCRIPTION Grain Hopper Railway Wagons - A selection of four-axle covered grain hopper railway wagons manufactured between 1976 and 1989. Available models include 11-739 and 19-752, with a tare weight starting from 21.3 tonnes. Wagons are available with either a valid remaining period until the next scheduled repair or an expired scheduled repair interval. Container Flat Wagons - A selection of four-axle container flat wagons, also known as fitting platforms, manufactured between 1980 and 1991. Wagons are available with either a valid remaining period until the next scheduled repair or an expired scheduled repair interval. Buyers can select units according to their preferred model, year and repair status. Railway Tank Wagons for Sale – A selection of used railway tank wagons, model 15-1443, manufactured in 1977 and 1978. Declared tare weight is approximately 22.5 tonnes. Wagons are available with either a valid remaining scheduled repair interval or an expired repair interval. Buyers can select units according to the required year, condition and repair status. FULL DESCRIPTION Main information: • Models: 11-739 and 19-752 • Years of manufacture: 1976 to 1989 • Tare weight: from 21.3 tonnes • Multiple wagons available • Individual selection according to repair status Models: 13-470 and 13-9004 • Years of manufacture: 1980 to 1991 • Declared tare weight: approximately 21.3 to 22.0 tonnes, depending on the individual wagon • Multiple wagons available • Individual selection according to model and repair status Model: 15-1443 • Years of manufacture: 1977 and 1978 • Declared tare weight: approximately 22.5 tonnes • Multiple wagons available • Individual selection according to technical condition and repair status The available fleet includes: • Wagons with a valid remaining period until the next scheduled repair • Wagons whose scheduled repair interval has expired and which require scheduled workshop repair before further operation Buyers can select wagons according to their preferred model, year of manufacture, technical condition and repair status. Lredpfx Aozmtufsftop The exact model, manufacturing year, repair history and technical condition vary between individual wagons. Detailed wagon lists, identification numbers, photographs, available documentation and commercial terms can be provided on request. Price on request.

Condition: good (used), Year of construction: 1995, Chipper with horizontal feed via vibratory chute Motor: 30 kW Max. feed width: 320 mm Max. feed height: 80 mm Lredpjxc H Rlsfx Aftsp With conveyor belt

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Lrjdpsy Urtfsfx Aftjp Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.