Used Hogger for sale (14)

Condition: ready for operation (used), functionality: fully functional, Alpina mod PBV 330 cutter capacity 330 liters stainless steel bowl, lifter for meat bins, very good condition and prepared for vacuum. Dimensions: 300 x 220 x 160 cm Hfjdpfoxmh Slox Afien

Condition: good (used), overall dimensions 3300x2600x2450 mm; bowl 330 ltr; power supply 400 V, 50 Hz; total power 115 kW / 150 A; knives speeds 550/975/1950/2500/3200/4100 rpm, main motor 103 kW DC; bowl speeds 4/8/12/16 rpm, Hjdpjl Dmpaofx Afiefn bowl motor 1,2 kW; mixing speeds -65/-130 rpm with revese, hydraulic system 5,5 kW; loader; unloader; vacuum pump Busch 250 m3/h, 5,5 kW; weight 5600 kg.

Condition: used, 0 800x600 mm Motor output 18,5 kW 0 0,6 m³ Diameter of the motor 252 mm Dimensions (L/W/H) 1700x1130x1595 mm Weight 1300 kg Number of working hours 1741 h WEIMA shredder WL 4, machine completely checked ----- Note: The machine has been completely checked by us, it is running perfectly, see video. The blade and slide plate have already been replaced by the previous owner. We replaced the V-belt during the inspection. Description: The Weima high-performance shredders with their flexible application options can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into fuel chips and achieve an enormous reduction in the volume of the material in the case of bulky materials. Function: The machine is equipped with a large filling hopper and can be fed using a conveyor belt or by hand. This hopper can be adapted to Hsdpfx Asvvx Dzsfiefn individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. The hydraulically controlled slider feeds the wood waste to be shredded to the cutting area of ??the rotor and is controlled automatically and depending on the load. The internal slider guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are cardanically suspended to avoid transverse forces on the piston sleeves. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and works at a rotor speed of 80 - 120 rpm. The concavely ground, aggressive and 4- way rotating knives / cutting crowns are located in milled knife pockets on special knife carriers. This patented system guarantees high throughput, low energy consumption and optimal discharge of the shredded material by reducing the cutting gap between the counter knife and the rotor for the first time. The screen mounted under the rotor determines the chip size (10 - 100 mm). A hydraulically opened screen basket is also available on request. The power is transmitted from the electric motors via V-belts to a strongly dimensioned gear, which is mounted on one side of the rotor on the shaft stub. Technical data WL 4 / 18.5 kW ----- Feed opening: 600 x 800 mm Standard hopper capacity: 0.6 m³ Rotor working width: 600 mm Rotor diameter: 252 mm Power: 18.5 kW Rotor speed: approx. 90 rpm Sieve diameter: 15 mm Paint finish: Weima standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,300 kg Includes: Electrical control (Moeller / Siemens / Allen-Bradley) Control cabinet (Rittal / Sarell) Concavely ground cutting crowns (40 x 40 mm ) Sterntriangular start Vibration-damping foundation V-rotor (patented) with knife pockets milled into the profile (technical information according to the manufacturer - no guarantee!)

Condition: used, 0 600 x 800 mm Motor output 15 kW 0 0,6 m³ Diameter of the motor 260 mm Dimensions (L/W/H) 1.805 x 1.118 x 1.646 mm Weight ca. 1.100 kg Hoku single-shaft shredder H 600 Compact, robust, high throughput ----- Technical manufacturer description: The H600 high-performance shredder with its flexible application options can shred all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) and achieves a high and, in the case of bulky materials, achieves an enormous reduction in the volume reduction of the material. The hydraulically controlled pusher feeds the wood waste to be shredded to the cutting area of the rotor and is controlled automatically and automatically and load-dependent. The high-performance electric rotor made of has a diameter of 252 mm and operates with a rotor speed of rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-fold rotating knives / reversible cutting crowns are located in milled knife pockets knife pockets on special knife carriers. This highly efficient system guarantees, through the reduction of the cutting gap between the counter knife and rotor, it guarantees high throughput, low energy consumption and optimum optimised discharge of the shredded material. Chip size (10 - 60 mm) Technical data: Hopper opening 600 x 800 mm Hopper capacity 0.6 m³ Working width of the rotor 600 mm Rotor diameter 260 mm Drive power 15 kW Rotor speed 90 rpm Number of knives: 14 pieces + 2 pieces Type and size of knives: concave/40 x 40 mm, reversible cutting crowns concave/ 30 x 30 mm, broaching knives Screen perforation: 15/20 mm connected load: 400 V +/- 5% / 50 Hz included: Switch cabinet (Rittal) with 5 m cable Electrical control (SPS Siemens) Star-delta start-up Rubber oscillating elements E-rotor with blade pockets milled into the profile Gear limit switch 1st row of knives Hold-down device on the pusher for long and large parts Large 40 x 40 mm blades for optimum material feed Very robust gearbox Special broaching blade to prevent lateral jamming ----- Price of the above mentioned machine on request! Hjdpfx Afevrk A Usiofn ----- Prices plus packaging and shipping, plus VAT. (technical data according to manufacturer - without guarantee !)

Condition: used, Year of construction: 2002, min/max working width 150/3100 mm max working height 180 mm scorring / hogger spindle moulder adjustable spindle moulder adjustable and with jumping funtion sanding unit with belt adjustable obs: machine have to be dismatled for transport Hedpexdw A Iofx Afisfn

Condition: used, Year of construction: 2013, Numerical control PC Office with Widge Plus software Machine suitable for 1st + 2nd passage of the panel Mobile shoulder opening motorized by N.C. mm 3200 Panel width min - max mm 215 - 3200 Min - max panel height mm 10 - 60 Edge thickness in roll min - max PVC-ABS mm 0,3 - 3 Continuously variable feed speed 10 - 40 m\min Motorized pressure rubber belt Bearing track with retractable pin Pin height 12 - 18 - 25 mm Distance between the retractable pins mm 500 \ 400 Working groups mounted on NC motorized overtables Squaring part composed of (for each side): Anti-adhesive group Timed automatic anti-splinter group Double Hogger group Edging part composed of (for each side): Gluing unit with pre-melter for PUR glue and pre-melter for EVA glue Edge pressure rollers electronically controlled by N.C. Edge holder magazine with 6 positions End Cutting unit with two motors Rough trimming unit with 2 motors Fine trimming unit with 2 motors electronically controlled by NC Rounding unit with 4 motors Hfodpfx Afsk Egvdjien 0-90° tilting grooving group electronically controlled by CN (movable shoulder 0-90° tilting grooving group + double superimposed grooving unit (fixed shoulder) Anti-adhesive groups Edge scraper unit Glue scraping unit Brush group Phon group

Condition: excellent (used), 4-SIDES LINE of Double-side Sizing and Edge Banding. Workpieces dimensions: min. mm 195 x 250 x 60 / max. mm 1200 x 2500 x 60 Composed of the following machines: KZ0400a) Infeed table "HOMAG" Mod. TBL 100/25/12/S with motorized rollers Adjustable feeding speed 7-40 m/min KZ0400b) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 325/M1/C Adjustable feeding speed 15-40 m/min - with PC 22 SIZING: Double-Hogger KD10 (2 x Kw 6.6) + GLUEING: A3 with 2 reels BANDING: Overlapped Trimming BF10 (2 x Kw 0.55), NC controlled Fine Trimming PF20 (2 x Kw 0.4), Grooving Unit UF11 (Kw 4), Free space, Profile Scraper PN10, Finish (Glue Scraper + Buffing) Hfedpfx Aoiztxysfien KZ0400c) Turning Station "HOMAG" Mod. TDL 310 / 25 / 12 (from lengthwise to crosswise) Adjustable feeding speed 20-60 m/min KZ0400d) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 326/M2/C Adjustable feeding speed 15-32 m/min - with PC 22 SIZING: Anti-chipping (1xKw 4,5), Double-Hogger KD10 (2 x Kw 6.6) + GLUEING: A3 with 2 reels BANDING: End-trimming HL84 (2xKw 0.22), Overlapped Trimming BF10 (2 x Kw 0.55), NC controlled Fine Trimming PF20 (2 x Kw 0.4), Contour Trimming (Corner rounding) FF32 (4 x Kw 0.4), Free space, Profile Scraper PN10, Finish (Glue Scraper + Buffing) MINIMUM EDGE LENGTH 70 MM (Part thickness for narrow parts max. 25 mm, Edge thickness max. 2 mm, Cycle speed: max. 20 T/min, Feed rate max. 20 m/min.)

Condition: used, - Workpiece width: min. approx. 190 mm - max. 2600 mm - Workpiece thickness (mm): 8 - 90 - Workpiece projection adjustable (mm): 10 - 120 Hsdpfx Afour Uzqjisfn - Working height from floor (mm): 905 - Infinitely variable feed rate (m/min.): 5 - 25 - Magnetic braking of the feed motor - Max. adjustment speed (m/min.): 3 - Transport chain with cams: Cam spacing 900 mm, cam height adjustable up to 20 mm 3 motors per side: - 1st scorer: 1.5 kW controlled - 2nd hogger: 4.5 kW, 15° swiveling - 3rd milling motor: 4.5 kW, electro-pneumatic control for insert milling, swivel range 90° - Free space: for mounting a standard milling unit

Condition: ready for operation (used), Year of construction: 2006, Additional Equipment Seperating agent spray device on top/bottom / Double Hogger Longitudinal/Cross: 6.6 kW with electropneumatic control / Gluing Unit A3 - 2 rolls / Profile Trimming Unit FF12 on top/bottom with motors at 12000 rpm / Finish Unit FA11 on top/bottom / Stepless stop cams with maximum cam projection of 25 mm / Standard Trimming Unit SF20 6.6 kW / Rough Trimming Unit 0.55 kW PUR Nordson Melting Station / Tool Set / Suction Tube This HOMAG KFL 526 / C was manufactured in 2006. A robust double-sided edgebander, it handles workpiece thicknesses from 12 to 40 mm and sizes up to 2500 x 1200 mm. Features include a gluing unit, profile trimming, and a finish unit for precise edge finishing. Ideal for efficient edge banding with speeds up to 35 m/min. Contact us for more information about this machine. Hfjdowqta Sopfx Afijn Application Types Edge Banding

Condition: used, Double end profiler, edge processing machine, scoring motor, hogger motor, spindle motor, milling motor -Manufacturer: Peske, milling motor type VS 31.09-4 -Power: 0.37 kW 8540 rpm at 300 Hz -Voltage: 165 volts -Take-up: collet -Tool: Ø 8 mm -Number: 2x motor available Hsdpsb A Tcwsfx Afisfn -Price per piece -Dimensions: 260/60/H140 mm / 255/60/H155 -Weight: 3.5 kg/pc.

Condition: used, Double end profiler, edge processing machine, scoring motor, hogger motor, milling motor, spindle motor Hfodomdygispfx Afion -Manufacturer: Perske, milling motor type DVMS 903/2 -Power: 0.4 kW 12000 rpm at 200 Hz -Voltage: 133 volts -Recording shaft: Ø 30 x 32 mm -Tool: Ø 70 x 20 mm / insert milling cutter -Number: 1 piece available -Dimensions: 250/59/H140 mm -Weight: 3.8 kg

Condition: used, Double end profiler, edge processing machine, scoring motor, hogger motor, milling motor, spindle motor -Power: 0.4 kW 12000 rpm at 200 Hz -Voltage: 133 volts -Take-up shaft: Ø 20 mm -Tool: Ø 70 x 20 mm Hsdpfx Aeb A Tctofisfn -with indexable milling cutter -Number: 1 piece available -Dimensions: 285/60/H170 mm -Weight: 5kg

Condition: used, Double end profiler, edge processing machine, scoring motor, hogger motor, electric motor, spindle motor, milling motor -Manufacturer: Haffner, milling motor type M 30 -Power: 300W 17000 rpm -Voltage: 200V 300Hz Hfsdpfjku Hrrox Afien -Dimensions: 240/70/90 mm -Weight: 2.5 kg

Condition: used, Double end profiler, edge processing machine, scoring motor, hogger motor, spindle motor, milling motor -Manufacturer: Perske, milling motor for edge processing machines -Power: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Recording shaft: Ø 15 x 17 mm / M12 -Dimensions: 190/70/H85 mm -Weight: 1.8 kg Hjdpfx Ael Dvuaofiefn