Used Hollow Spindle for sale (12,807)

Condition: used, machine/vehicle number: 11756, second-hand WEILER LZ 280 sliding headstock and sliding headstock lathe center height 125mm center width: 800mm spindle speed approx. 26-2000 rpm 1 x three-jaw lathe chuck Ø 125mm with inner and outer jaws, brand new Multifix size A with 2 interchangeable holders Emergency stop/switch unit, rear chip guard, Hedpfxovd Dbns Afisnu all change wheels present, drive disk, storage tray, machine light, new socket, 15 collets from Ø 3.5 - 18.5 mm, collet clamping tube, fixed point and MK 2 sleeve for clamping tube, bed stop, chuck protection cover, various turning tools and operating instructions. The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. A viewing of the machine is possible by arrangement.

Condition: used, Year of construction: 2021, Ser. no. 11479, control, manufacturer Siemens, type Sinumerik 840Dsl, workpiece Ø 200 mm, workpiece length 100 mm, main spindle 18 kW, speed 3,000 rpm, 12-position tool turret, external grinding spindle TSE 200, dressing unit, workpiece transport system, 21 workpiece carrier pallets, chip conveyor, emulsion mist extraction, 2x coolant supply 8/30 bar, paper band filter, magnetic pre-separator, inline workpiece measurement, handling system interface Siemens Profinet, double piston clamping cylinder, flange mandrel +++ Attention: Machine is part of an online auction! +++ Hnsdpfx Aewzvnyefieu

Condition: as good as new (ex-display), functionality: fully functional, power: 7.35 kW (9.99 HP), spindle diameter: 30 mm, pivoting range: 46 °, input voltage: 400 V, rotational speed (min.): 1,000 rpm, rotational speed (max.): 18,000 rpm, input frequency: 50 Hz, The new profil 92 M e-motion spindle moulder is Format4’s premium model, offering maximum operating comfort and ensuring absolute efficiency through minimal setup times during milling operations. The advanced electric spindle features an HSK 63F interface for a tool quick-change system with pneumatic clamping. The swiveling range of ±46° enables limitless machining versatility. With the self-explanatory e-motion control via a 15-inch touchscreen panel, spindle speed, spindle height and angle, as well as the fence position and even the table opening, can be set intuitively and precisely. Integrated memory for tools, spindle settings, and milling programs ensures perfect repeat accuracy and the shortest setup times. Electrically controlled, eccentric inserts provide maximum table support area and significantly reduce adjustment work, especially when swiveling the spindle. The newly developed heavy-duty precision milling fence features two powered axes for precise depth adjustment of the complete fence, plus an independent, adjustable depth stop for the right-hand feeding jaw. For convenient access during curve milling, the fence can be swung completely out of the working area. Optionally, the Format4 profil 92 M e-motion can be equipped with an electrically height-adjustable power feeder. Further technical data: - Maximum tool diameter: 250 mm - Usable spindle height: 140 mm - Height adjustment: electric Optional equipment: 12 Potential-free contact 106 HSK 63F spindle, Ø 30 mm, 140 mm 118 Integral safety rulers, 650 mm 119 Table opening 255 mm with controlled eccentric inserts Hjdpfswztr Nsx Afienu 183 Table extension on both sides 670 mm with 2200 mm sliding frame 213 Electrically height-adjustable feeder support, incl. horizontal tube 220 Parts list holder with A9 clipboard Advantages: - Highly efficient electric spindle with stepless speed adjustment and HSK 63F interface - Position control for milling height and angle ±46º - Position control for milling fence including offset function - Smartouch with intuitive e-motion control system - Table opening with controlled eccentric inserts (optional) - Electrically adjustable height for the feeder on overhead column (optional) Further information: - The electric spindle features a HSK F63 tool quick-change system - Clamping range: 2–25 mm with OZ25 collets - "Integral" safety rulers: 650 mm - Table extension on both sides 670 mm with 2200 mm sliding frame - Table opening 255 mm with controlled, eccentric inserts

Condition: good (used), Year of construction: 1975, Turning diameter 2300 mm Turning length 4000 mm Faceplate 1000 mm 2 x steady rests Hodjrkpmkspfx Afijnu

Condition: reconditioned (used), Year of construction: 1956, Lead and Feed Screw Lathe WEIPERT Year of manufacture: 1956 Spindle bore: 90 mm Centre distance: 3000 mm Swing over bed: 800 mm Swing over cross slide: 610 mm Swing in gap: 1120 mm Speed range: 7.5 – 475 rpm Comes with the following accessories: Multifix toolholder with 11 inserts Coolant system 3-jaw chuck 315 mm 3-jaw chuck 400 mm 3-jaw chuck 500 mm Faceplate 400 mm Hjdpsw Ew D Djfx Afionu Faceplate 800 mm Faceplate 1000 mm Travelling steady Various turning tools (30 insert tools) 2 revolving centres 1 drill chuck Operating manual

Condition: used, Year of construction: 1984, incl. Eumacop feed, table size: 1100 x 760 mm, table height: 870 mm, speeds: 3000/4500/6000/9000 rpm, height adjustment: 120 mm, weight: approx. 700 kg Hnjdpfx Afjw E E Epjiou Storage location: Nattheim

Condition: new, Year of construction: 2025, CONDOR VC plus The new dimension in conventional precision lathes. A high-quality, powerful and energy-efficient precision lathe for the highly productive area of production and toolmaking, but also for training and further education High-quality, energy-efficient, precise and universally applicable in production, training and further education. It impresses with: future-oriented technology maximum accuracy durability user-friendly ergonomics minimum space requirement and a wide range of accessories. The consistent and innovative further development of the tried-and-tested Condor series is the economical and intelligent solution for your daily applications. Technical data: WORKING AREA Center height 180 mm Hnsdpfoqwipnjx Afieu Swing diameter over bed 360 mm Swing diameter over facing slide 190 mm Center width 800 mm TURNING SPINDLE Spindle head DIN 55027/DIN ISO 702-3 size 6 Spindle bore 57 mm Spindle diameter in front bearing 90 mm MAIN DRIVE Drive power 60 %/100 % ED - / 10.5 kW Speed range 25 - 4,000 min-1 Number of speeds infinitely variable FEED RANGE Number stepless Longitudinal 0.01 - 6 mm/rev Plan 0.003 - 2 mm/rev THREAD CUTTING RANGE Metric thread 0.1 - 20 mm REITSTOCK Quill diameter 50 mm Quill stroke 110 mm Internal taper DIN 228 MK 3 ACCEPTANCE ACCURACY DIN 8605 Equipped with WEILER WTS 15 VC plus screen display - Large, clearly arranged 15" touch screen, rotatable and tiltable, resolution 1366 x 768 - Change of operating screens via swipe movements - Operating functions can be called up via app manager - Control panels can be freely configured, placed and scaled as required - Drawings / sketches can be imported from PDF files Can be zoomed individually via USB interface - Video-supported maintenance of the machine - Context help menu (instead of screen display WEILER VC plus) The machine is located in our showroom in 71334 Waiblingen-Beinstein and is available immediately. Please contact us regarding equipment.

Condition: used, Year of construction: 2005, functionality: fully functional, table length: 1,200 mm, table width: 800 mm, incl. feeder Maggi Steff 2034 Hnsdpfsulkm Aex Afieu

Condition: new, Bernardo Universal Lathe Titan 560 x 3000 Pro Vario Technical Specifications Centre distance: 3000 mm Centre height: 280 mm Swing over bed: 560 mm Swing over gap: 785 mm Swing over cross slide: 350 mm Bed width: 350 mm Spindle bore: 105 mm Spindle mount: DIN 55029, D1 – 8 Speed range: 25 – 220 / 220 – 1500 rpm Longitudinal feed range (42): 0.055 – 3.061 mm/rev Cross feed range (42): 0.025 – 1.384 mm/rev Metric threads (41): 0.1 – 14 mm Inch threads (60): 2 – 112 TPI Quill diameter: 75 mm Quill stroke: 185 mm Quill taper: MT 5 Motor power: 7.5 kW (10.0 HP) Machine dimensions (L): 4340 mm Hnodsxl Tdqopfx Afieu Width x Height: 1150 x 1610 mm Weight: approx. 3000 kg Features • Standard with Delta frequency inverter for high torque at low speed and nearly constant speed under load • Stepless speed control, with digital speed readout • Versatile applications in general engineering, production, single-part manufacture, etc. • Removable gap bridge allows machining of large-diameter workpieces • Rapid traverse longitudinally and in cross direction as standard, reducing non-productive time • Modern main spindle bearing with precision angular contact ball bearings • The machine bed is made from a single casting, extremely torsion-resistant and low-vibration, providing the foundation for precise turning • Tailstock is adjustable for taper turning • Central lubrication system for carriage Scope of delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-315 mm / D8 • Fixed steady rest – max. workpiece diameter 180 mm • Travelling steady rest – max. workpiece diameter 120 mm • Foot pedal with CE-compliant brake function • Safety guard for quick-change tool post • LED machine lamp • Initial fill with Shell Tellus 46 • Faceplate 450 mm • 2 centre points • Frequency inverter • Digital speed readout • Safety slip clutch • Rapid traverse longitudinally and in cross direction • Coolant system • Quick-change tool post with 4 holders • Change gears • Reducing sleeve • Chip guard tool kit

Condition: good (used), Year of construction: 1993, Turning diameter over bed 1250 mm Turning diameter over slide 900 mm Hodou E N H Aopfx Afisnu Maximum workpiece weight with steady rest 10 000 kg Weight of the machine 20 200 kg without equipment Year of construction 1993

Condition: good (used), Year of construction: 1989, functionality: fully functional, height adjustment type: mechanical, table length: 2,350 mm, spindle speed (max.): 9,000 rpm, overall weight: 850 kg, space requirement width: 1,200 mm, space requirement length: 2,400 mm, space requirement height: 1,620 mm, input voltage: 380 V, rotational speed (max.): 9,000 rpm, input frequency: 50 Hz, Equipment: motor brake, Spindle moulder with tilting spindle arbor -5/+45 degrees Milling fence with digital adjustment Speeds: 3000/4500/6000/9000 4-roller power feed Hnedpfjxl Sd Njx Afiju

Condition: used, Milling Spindle Manufacturer: HSD Type: ES 779L 4P 12.00 kW H1 Hjdewyay Dopfx Afijnu HSD Milling Spindle 12 kW with tool changer and 6-position station for KUKA Quantec series Comprising: 1 pc. Water-cooled milling spindle with tool changer HSD ES779L 4P 12.00 kW H1, liquid cooling 1 pc. Tool station for 6 tools (toolchanger station) with LEONI measurement station for tool inspection 1 pc. KUKA technical cabinet with KEB frequency inverter, control technology and water chiller, Art. No. 00216249, Serial No. 0395009, Year of manufacture: 2018 Weight: 360 kg 1 pc. Hose package as well as connection cables from control cabinet to the HSD spindle. Originally intended for a KUKA robot of the Quantec series, all holders and connections are included.

Condition: good (used), Year of construction: 2003, MARTIN T20 Spindle Moulder Refurbished machine Year: 2003 Specifications: Hodpfx Aexl Rtcsfisnu 50 mm spindle Fixed spindle Interchangeable spindle Table extension and front support Table length: 2260 mm Table depth: 900 mm Electric height adjustment with precision digital display Spindle speeds: 3000 / 4500 / 6000 / 9000 RPM Maximum cutter diameter: 250 mm Maximum tenoning tool diameter: 350 mm 19 A / 400 V

Condition: new, Year of construction: 2012, hydraulic linishing or polishing unit for hollow ware like cooking pots Hedpebdnuajfx Afienu

Condition: new, Bernardo Universal Lathe Titan 560 x 2000 Pro Vario Technical Specifications Center Distance: 2000 mm Center Height: 280 mm Swing Over Bed: 560 mm Swing Over Gap: 785 mm Swing Over Cross Slide: 350 mm Bed Width: 350 mm Spindle Bore: 105 mm Spindle Mount: DIN 55029, D1 – 8 Speed Range: 25 – 220 / 220 – 1500 rpm Longitudinal Feed Range (42): 0.055 – 3.061 mm/rev Cross Feed Range (42): 0.025 – 1.384 mm/rev Metric Threads (41): 0.1 – 14 mm Inch Threads (60): 2 – 112 TPI Quill Diameter: 75 mm Quill Travel: 185 mm Quill Taper: MK 5 Motor Power: 7.5 kW (10.0 HP) Machine Dimensions Length: 3340 mm Width x Height: 1150 x 1610 mm Weight approx.: 2720 kg Features • Standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, with digital readout of set speed • Versatile applications in general engineering, production, one-off manufacturing, etc. • Removable gap bridge for machining large-diameter workpieces • Standard rapid traverse in longitudinal and cross directions for reduced non-productive times • Modern main spindle bearing with angular contact ball bearings in precision design • The machine bed is cast in one piece, extremely torsion-resistant and low-vibration, ensuring a key requirement for precise turning • Tailstock offset for taper turning • Central lubrication for the carriage Scope of Delivery • 3-axis ES-12 V digital readout with LCD display • 315 mm / D8 3-jaw chuck PS3 • Fixed steady rest – max. passage diameter: 180 mm • Follow steady rest – max. passage diameter: 120 mm • Foot pedal with braking function (CE compliant) • Safety guard for quick-change toolpost • LED machine light • Initial fill with Shell Tellus 46 • 450 mm face plate • 2 live centers • Frequency inverter • Digital speed display • Slip clutch • Rapid traverse longitudinal and cross • Coolant device Hodpfxoxl Tc To Afienu • Quick-change toolpost with 4 holders • Change gears • Reducing sleeve • Chip guard • Operating tools

Condition: used, Year of construction: 1985, Turning diameter over bed: 800 mm Hsdjwdhibepfx Afijnu Turning length: 3000 mm No electrical cabinet

Condition: excellent (used), Panhans 240A spindle moulder (bottom spindle) Spindle diameter: 30 mm Spindle length: 130 mm Variable spindle speed: 3000/4500/6000/9000 rpm Electronic spindle height adjustment Electronic fence adjustment Electronic angle adjustment SCM 4-roller power feed Hodpfxjxg Iz He Afijnu

Condition: excellent (used), Year of construction: 2021, Vertical Single-Spindle Turning Center - Vertical Lathe Manufacturer: EMAG Model: VL 400 (Siemens) Year of Manufacture: 2021 Operating Hours: approx. 1,848 Turret Base Unit and Cross-Slide Unit with Y-Axis HP Turret Drive Unit for Driven Tools (C442) with internal coolant supply to the tool Maximum speed: 6,000 rpm Corner speed: 3,200 rpm Tool carrier unit for driven tools: 12 x BMT75 Rotary Workpiece Transport System, O-Design Drag Frame System for 10 workpieces Workpiece height (incl. pallet): max. 300 mm Workpiece weight: max. 60 kg Set (10 pieces) drag frames for O-band For workpiece diameters: 150 - 400 mm Blow-off Device for workpiece and clamping device (Pick-Up) Coolant Supply: 15 bar Coolant Pump Delivery Rate approx. 80 l/min at 15 bar Cooling Unit (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal management. Spindle drive, control cabinet, and turret are maintained at ambient temperature (10°C - 40°C). Double Coolant Filter, manually switchable Filter fineness 100 µm, with electrical and mechanical contamination indicators Chip Conveyor Hinged belt design: rear discharge Chip discharge height 1,100 mm (with integrated coolant tank, approx. 500 l capacity) Emulsion Mist Extraction: Extraction capacity approx. 800 m³/h Rinsing Gun Workpiece Measurement with measuring probe Probe blowing device Tool life monitoring (sister tool management) Tool Breakage Monitoring: TOOLINSPECT MCU-EUROPA (SIEMENS 840Dsl, FANUC 31i/32i) Three-Color Signal Tower Axial Drilling-Milling Head – BMT75 CC 5x Angle Drilling-Milling Head 90° – BMT75 CC (i=1:1) Set of tools for OP10 + OP20 Hydraulic Power Chuck Cylinder, size 150 – with 1 media transfer Max. clamping force 10,850 daN at 70 bar Coolant Through Spindle Programmable Clamping Pressure Adjustment 3-Jaw Power Chuck KNCS-N 500-155 Quick Change Max. = 2,200 rpm (Reference speed according to DIN 6386) Hedpfevq Iwysx Afijnu Set of hard jaws Set of soft top jaws Attachments for KNCS-N 500-155 Flushing nozzle in chuck bore Additional Tool Holders with Tools: 1x 8.BMT25VL8IKX50 Finishing Tool External 1x 8.BMT25VL8IKX50 Roughing Tool External 1x 60.7516VL8IKDI15 Engraving Tool 1x 60.7516VL8IKDI15 Thread Tap Holder 1x 40.75V5KRVL8IKD Face Milling Cutter 50 mm 3x 80.75V5VL8IKD Boring Bar Holder 2x 27.V520HYDL26 Drill, diameter 20 mm 1x 42.V522L08Ik Drill, diameter 22 mm 1x 27.V514WNL31 Drill, diameter 14 mm Software package Operating manual / Maintenance manual 151025ä

Condition: new, Precision lead and feed screw lathe Manufacturer: GDW Model: LZ 330 V economyline Condition: New machine with stepless speed control according to the highest safety standards Centre height: 165 mm Centre distance: 670 mm Spindle bore: 43 mm Standard equipment includes: - 3-axis digital readout, 6" colour display - LED machine light, integrated into machine enclosure - Electromechanical limit switch device for threading and feed operation - Quick-change toolpost, size A, with turning toolholder - Main drive brake system (spindle brake) - Sliding chuck guard with limit switch monitoring Hodpfx Afjw S E Ddoienu - Removable rear chip guard - Sliding splash guard - Pull-out chip tray - Simple bed stop (longitudinal fixed stop) - Central lubrication - Set of change gears (tooth counts: 21-27-28-33-42-120) - Reducing sleeve for main spindle internal taper ME 50/MK 3 - Protective flange for spindle nose DIN 55027-5 - Additional service socket - 2 fixed centre points DIN 806-MK 3 - Set of operating tools, keys, and oil gun - Replacement shear pins - Operating manual with spare parts list and electrical documentation

Condition: new, Bernardo Universal Lathe Titan 560 x 1500 Pro Vario Technical Specifications Distance between centres: 1500 mm Centre height: 280 mm Swing over bed: 560 mm Swing over gap: 785 mm Swing over cross slide: 350 mm Bed width: 350 mm Spindle bore: 105 mm Spindle mount: DIN 55029, D1 – 8 Speed range: 25 – 220 / 220 – 1500 rpm Hnodpfexl Tcyjx Afisu Longitudinal feed range (42): 0.055 – 3.061 mm/rev Cross feed range (42): 0.025 – 1.384 mm/rev Metric threads (41): 0.1 – 14 mm Inch threads (60): 2 – 112 TPI Quill diameter: 75 mm Quill travel: 185 mm Quill taper: MK 5 Motor power: 7.5 kW (10.0 HP) Machine dimensions: length 2840 mm; width x height 1150 x 1610 mm Weight approx.: 2420 kg Features • Supplied as standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, actual speed is displayed digitally • Versatile applications in general engineering, production, single-part manufacturing, etc. • Removable gap bridge enables machining of workpieces with large diameters • Standard with rapid traverse in both longitudinal and cross directions to reduce non-productive times • Modern main spindle bearing with precision angular contact ball bearings • The machine bed is cast in one piece, extremely torsion-resistant and vibration-damping, ensuring the necessary prerequisites for precise turning • Tailstock can be offset for taper turning • Central lubrication of the carriage Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-315 mm / D8 • Fixed steady rest – max. workpiece diameter 180 mm • Follow rest – max. workpiece diameter 120 mm • Foot pedal with brake function according to CE • Safety guard for quick-change tool post • LED machine light • Initial filling with Shell Tellus 46 • Face plate 450 mm • 2 live centres • Frequency inverter • Digital speed display • Slip clutch • Rapid traverse longitudinal and cross • Coolant system • Quick-change tool post with 4 holders • Change gears • Reducing sleeve • Chip guard rear wall • Operating tools

Condition: new, Precision lead screw and feed screw lathe Manufacturer: GDW Model: LZ 400 V economyline Condition: New machine with stepless speed control to the highest safety standard Centre height: 200 mm Centre distance: 1,000 mm Spindle bore: 62 mm Standard configuration includes: -- 3-axis digital readout, 7" colour display with constant V feature - LED machine light, integrated into machine enclosure - Electromechanical limit switch system for threading and feed operations - Quick-change toolpost size B with turning tool holder - Main drive brake system (spindle brake) - Sliding chuck guard with interlock monitoring - Removable chip guard rear panel - Sliding splash guard - Extendable chip tray - Simple bed stop - Central lubrication system - Set of change gears (number of teeth: 21-33-84-120) Hedpfjxg Emysx Afionu - Reducing sleeve for main spindle inner taper ME 70/MK 4 - Protective flange for spindle nose DIN 55027-6 - Additional service socket - 2 fixed centres DIN 806-MK 3 - Set of operating tools, keys and oil gun - Spare shear pins - Operating manual with spare parts list and electrical documentation

Condition: new, Bernardo Universal Lathe Solid 460 x 2000 Pro Vario Technical Specifications Centre distance: 2000 mm Centre height: 230 mm Swing over bed: 460 mm Swing over gap: 690 mm Swing over cross slide: 274 mm Bed width: 300 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Speed range: 25 – 250 / 250 – 1700 rpm Longitudinal feed range (42): 0.055 – 3.065 mm/rev Cross feed range (42): 0.025 – 1.386 mm/rev Metric threads (41): 0.1 – 14 mm Inch threads (60): 2 – 112 TPI Quill diameter: 60 mm Quill stroke: 130 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 3250 x 1080 x 1370 mm Weight approx.: 2030 kg Features Hnjdpfx Aexl Tcmjfieu • Modern main spindle bearing with precision angular contact ball bearings • Standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, set speed displayed on digital readout • Hardened and ground gears and shafts, including in feed gearbox • Standard with rapid traverse longitudinally and in cross for reduced non-productive times • Central, user-friendly feed and thread selection with leadscrew and feed rod • Oversized, hardened, and precision-ground gears • Simple, smooth, and precise speed and feed adjustment • One-piece cast machine bed, extremely torsion-resistant and low-vibration, ensuring essential prerequisites for precision turning Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Fixed steady rest – max. passage diameter 150 mm • Travelling steady rest – max. passage diameter 110 mm • Initial fill with Shell Tellus 46 • Face plate 450 mm • Quick-change tool post with 4 holders • Safety device for quick-change tool post • Foot pedal with CE-compliant brake function • Coolant system • Frequency inverter • Overload clutch • Rapid traverse longitudinal and cross • Change gears • Reducing sleeve • 2 centres • Thread dial indicator • LED machine lamp • Chip guard at the rear • Operating tools

Condition: new, Bernardo Universal Lathe Solid 460 x 1000 Pro Vario Technical Specifications - Distance between centres: 1000 mm - Centre height: 230 mm - Swing over bed: 460 mm - Swing over gap: 690 mm - Swing over cross slide: 270 mm - Bed width: 300 mm - Spindle bore: 80 mm - Spindle mount: DIN 55029, D1-8 - Spindle speed range: 25 – 250 / 250 – 1700 rpm - Longitudinal feed range (42 rates): 0.055 – 3.065 mm/rev - Cross feed range (42 rates): 0.025 – 1.386 mm/rev - Metric thread pitches (41): 0.1 – 14 mm - Inch thread pitches (60): 2 – 112 TPI - Quill diameter: 60 mm - Quill travel: 130 mm - Quill taper: MK 4 - Motor power: 5.5 kW (7.5 HP) - Machine dimensions (W x D x H): 2300 x 1080 x 1600 mm - Weight: approx. 1730 kg Features • Modern headstock spindle bearing with precision angular contact ball bearings • Standard-equipped with Delta frequency inverter for high torque at low speeds and near-constant speed under load • Infinitely variable speed control; set speed is shown on the digital display • Hardened and ground gears and shafts, including in the feed gearbox • Standard longitudinal and cross rapid traverse for minimized idle times • Central, user-friendly controls for feeds and threading, with leadscrew and feed rod • Large-size gears, hardened and precision-ground • Simple, smooth and precise speed/feed adjustments • Machine bed is one-piece cast, extremely rigid and low-vibration for accurate turning Scope of Delivery • 3-axis digital readout ES-12 V with LCD display Hsdpfx Asxl Tcasfienu • 3-jaw chuck PS3-250 mm / D8 • Fixed steady rest – max. diameter 150 mm • Travelling steady rest – max. diameter 110 mm • Initial fill with Shell Tellus 46 • Face plate 450 mm • Quick-change toolpost with 4 tool holders • Safety guard for quick-change toolpost • Foot pedal with CE-compliant braking function • Coolant system • Frequency inverter • Slip clutch • Longitudinal and cross rapid traverse • Change gears • Reducing sleeve • 2 dead centres • Thread dial indicator • LED machine lamp • Chip guard • Operating tools

Condition: new, Bernardo Universal Lathe Smart 410 x 1500 Pro Vario Technical Specifications Centre distance: 1500 mm Centre height: 210 mm Swing over bed: 420 mm Swing over gap: 580 mm Swing over cross slide: 255 mm Bed width: 250 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1 – 6 Speed range, 2 stages: 30 – 550 / 550 – 3000 rpm Longitudinal feed range (17): 0.05 – 1.7 mm/rev Cross feed range (17): 0.025 – 0.85 mm/rev Metric threads (42): 0.2 – 14 mm Imperial threads (45): 2 – 72 TPI Quill diameter: 50 mm Quill travel: 140 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 2590 x 1050 x 1600 mm Weight: approx. 1325 kg Features • Equipped as standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, selected speed displayed digitally • Prism bed made of cast iron, inductively hardened and precision ground • Central, user-friendly feed and thread control with leadscrew and feed shaft • Modern main spindle bearings with precision angular contact ball bearings • Standard features include frequency inverter and 3-axis digital readout • Hardened and ground gears and shafts, including in the feed gearbox • Speed and feed settings are simple, smooth, and precise to operate • Adjustable tailstock for taper turning, handwheel with fine scaling (0.02 mm) • Removable bridge allows machining of large-diameter workpieces Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw steel chuck PO3-200 mm / D6 • Faceplate 350 mm • Fixed steady – max. workpiece diameter 135 mm • Travelling steady – max. workpiece diameter 65 mm • Foot pedal with brake function according to CE Hodpfx Afexl Ta Soijnu • Four-way tool post • Safety guard for four-way tool post • Micrometer longitudinal stop • Turret stop with fine adjustment • Frequency inverter • First fill with Shell Tellus 46 • Coolant system • Slip clutch • Thread dial indicator • LED machine lamp • Change gears • Reducing sleeve • 2 dead centres • Chip guard/rear screen • Operator tools

Condition: new, Bernardo Universal Lathe Smart 410 x 1000 Pro Vario Technical Specifications Centre distance: 1000 mm Centre height: 210 mm Swing over bed: 420 mm Swing over gap: 580 mm Swing over cross slide: 255 mm Bed width: 250 mm Hodpjxl Tarofx Afisnu Spindle bore: 52 mm Spindle mount: DIN 55029, D1 – 6 Speed range, 2 steps: 30 – 550 / 550 – 3000 rpm Longitudinal feed range (17): 0.05 – 1.7 mm/rev Cross feed range (17): 0.025 – 0.85 mm/rev Metric threads (42): 0.2 – 14 mm Inch threads (45): 2 – 72 TPI Quill diameter: 50 mm Quill travel: 140 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 2090 x 1050 x 1600 mm Weight approx. 1145 kg Features • Standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, with set spindle speed displayed digitally • Prism bed made of grey cast iron, induction-hardened and precision ground • Central, user-friendly controls for feeds and threading with leadscrew and feed shaft • Modern main spindle bearing arrangement with precision angular contact ball bearings • Standard with frequency inverter and 3-axis digital readout • Hardened and ground gears and shafts, including those in the feed gearbox • Simple, smooth, and precise adjustment of speed and feed settings • Sliding tailstock for taper turning, handwheel with adjustable fine scale (0.02 mm) • Removable gap bridge for machining large-diameter workpieces Scope of Delivery • 3-axis digital readout system ES-12 V with LCD display • 3-jaw steel chuck PO3-200 mm / D6 • Face plate 350 mm • Fixed steady rest – max. capacity dia. 135 mm • Travelling steady rest – max. capacity dia. 65 mm • Foot pedal with brake function, CE compliant • Four-way tool post • Safety guard for four-way tool post • Micrometer longitudinal stop • Indexing stop with fine adjustment • Frequency inverter • Initial fill with Shell Tellus 46 • Coolant system • Slip clutch • Thread dial indicator • LED machine lamp • Change gears • Reducing sleeve • 2 centre points • Chip guard (rear) • Operating tools