DRILLING HEADS 3 SPINDLES 130X80

Condition: ready for operation (used), Year of construction: 1999, operating hours: 78,000 h, functionality: fully functional, turning length: 205 mm, spindle speed (max.): 10,000 rpm, bar diameter (max.): 20 mm, controller model: Fanuc 16i-T, number of axes: 9, CNC sliding headstock lathe with 9 axes! TECHNICAL DETAILS Nedpfsx U Af Ssx Ad Nekt Axes: X / C1 / Y / E / B / A / X / C2 Maximum bar diameter: 20 mm Maximum turning length: 205 mm / 195 mm Maximum main spindle speed: 10,000 rpm Maximum sub-spindle speed: 10,000 rpm MACHINE DETAILS Control: Fanuc 16i-T Coolant: Oil Tank capacity: 170 L Operating hours: 78,000 h EQUIPMENT 4-position tool holder 3 cross drilling units Turret with 8 stations Various additional tool holders Tailstocks Parts conveyor Bar feeder FMB Turbo 3-26 /3200/A Fire extinguishing system Kraft & Bauer Chip conveyor Mayfran

Condition: good (used), Year of construction: 1991, Braun Canali band resaw TB 1100 Unimaster Roller diameter 1100mm With swivel table for diagonal cut Njdpeucnt Hefx Ad Nokt disassembled from our warehouse in 23936 Grevesmühlen

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning length: 205 mm, spindle speed (max.): 10,000 rpm, turning diameter: 20 mm, controller model: Cincom Mitsubishi Meldas, counter spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Bar diameter max.: 20 mm Turning length max.: 205 mm Main spindle speed max.: 10,000 rpm C-axis (main spindle): 0.001 degree Counter spindle speed max.: 10,000 rpm C-axis (counter spindle): 0.001 degree Tool capacity: 18 tools Axes: 7 Nkodpfx Adox U Afxo Njt MACHINE DETAILS Control: Cincom Mitsubishi Meldas Dimensions & Weight Machine dimensions (LxWxH): 2,540 x 1,450 x 1,850 mm Machine weight: 1,750 kg Bar feeder dimensions (LxWxH): 3,900 x 900 x 1,450 mm Bar feeder weight: 850 kg EQUIPMENT Parts conveyor belt Bar feeder FMB Turbo 3-26

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, turning length: 205 mm, spindle speed (max.): 10,000 rpm, turning diameter: 20 mm, controller model: Cincom Mitsubishi Meldas, counter spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Max. bar diameter: 20 mm Max. turning length: 205 mm Max. main spindle speed: 10,000 rpm Main spindle C-axis: 0.001 degrees Max. sub spindle speed: 10,000 rpm Sub spindle C-axis: 0.001 degrees Tool capacity: 18 tools Number of axes: 7 MACHINE DETAILS Control: Cincom Mitsubishi Meldas Nksdpfx Adex U Ad Us Net Dimensions & Weight Machine dimensions (LxWxH): 2,540 x 1,450 x 1,850 mm Machine weight: 1,750 kg Bar feeder dimensions (LxWxH): 3,900 x 900 x 1,450 mm Bar feeder weight: 850 kg EQUIPMENT Parts conveyor FMB Turbo 3-26 bar feeder

Condition: used, Rounding machine tool WemaProbst RHM 200 Nkodpfxjv Ii Tkj Ad Not

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 0501DN6870, Year of construction: 2024, operating hours: 128 h, load capacity: 1,500 kg, lifting height: 3,000 mm, overall weight: 2,940 kg, wheelbase: 1,475 mm, Equipment: sideshift, TECHNICAL DETAILS Load capacity: 1,500 kg Lift height: 3,000 mm Wheelbase: 1,475 mm Distance to load centre: 500 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,120 x 2,130 mm Total weight: 2,940 kg Max. battery weight: 283 kg Operating hours: 128 h Nkedpfx Adox Ux Rke Njt EQUIPMENT Side shifter Lighting Indicators Rear-view mirror Protective roof Trailer coupling Power steering Solid rubber tyres at the front, pneumatic tyres at the rear Charger

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, working width: 1,300 mm, workpiece height (max.): 140 mm, controller model: Xinje XD5, empty load weight: 4,500 kg, working length: 200 mm, TECHNICAL DETAILS 1st Station: 15 cup grinding brushes with quick-change mount 2nd Station: 15 cup grinding brushes with quick-change mount 3rd Station: 9 tangentially arranged grinding brushes 4th Station: Crosswise roller with grinding brushes over the entire working width 5th Station: Crosswise roller with grinding brushes over the entire working width 6th Station: Air nozzle across the entire working width Working width: 1,300 mm Working length: 200 mm Workpiece height: 3 - 140 mm MACHINE DETAILS Control system: Xinje XD5 Total power requirement: 13.4 kW Dimensions & Weight Nksdpfx Adox Tt Uuj Net Required floor space: approx. 5.1 x 2 x 2.3 m Machine weight: approx. 4,500 kg EQUIPMENT Modular control of the module units Frequency converter for speed control Automatic adjustment of working height range Oscillating blowing air in the final section Easy maintenance and replacement of abrasive paper and brushes Spare brushes Grinding inserts Rubber conveyor belt with herringbone pattern, solid steel plate underneath across full width

Condition: new, Year of construction: 2023, functionality: fully functional, type of input current: three-phase, overall weight: 1,030 kg, rotational speed (max.): 2,500 rpm, turning diameter over cross slide: 320 mm, bar passage: 56 mm, spindle motor power: 3,700 W, mount diameter: 16 mm, spindle bore: 56 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 150 rpm, turning length: 750 mm, Equipment: rotational speed infinitely variable, Technical Specifications Center Distance 750 mm Center Height 160 mm Swing Diameter Over Bed 320 mm Swing Diameter Over Cross Slide 150 mm Bed Width 215 mm Spindle Bore 56 mm Spindle Mount Nksdpfxewh Aiwe Ad Nst A2-5 Speed Range, Continuously Variable 150 - 2500 rpm Travel X-Axis / Z-Axis 160 mm / 750 mm Rapid Traverse X-Axis / Z-Axis 4 / 7 m/min Number of Tool Positions 6 pcs. Tool Shank Dimensions 16 x 16 mm Positioning Accuracy ± 0.01 mm Quill Diameter 45 mm Quill Travel 100 mm Quill Mount MT 4 Motor Power 3.7 kW Machine dimensions (W x D x H) 1910 x 1150 x 1840 mm Weight approx. 1030 kg

Condition: ready for operation (used), functionality: fully functional, power: 55 kW (74.78 HP), gearing type: automatic, fuel type: diesel, empty load weight: 11,910 kg, Year of construction: 2020, operating hours: 2,761 h, machine/vehicle number: MAN00000K01048416, Equipment: AdBlue, CE marking, TECHNICAL DETAILS Tyre size: 375/85-24 Axle configuration: 4x4 Load capacity: 4,000 kg Lift height: 17.55 m Reach: 13.08 m MACHINE DETAILS Power: 55 kW Transmission type: Automatic Fuel type: Diesel Engine brand: TD 3.6 L4 Emission level: Stage V / Tier IV final Drive: Wheel Chassis design: Rigid Dimensions & Weight Transport dimensions (L x W x H): 6.27 m x 2.36 m x 2.45 m Unladen weight: 11,910 kg Operating hours: 2,761 h EQUIPMENT All-wheel drive CE marking AdBlue system Forks Quick couplers Nsdpfsx Tq Ncsx Ad Njkt Stabiliser Additional hydraulics

Condition: ready for operation (used), functionality: fully functional, empty load weight: 34,600 kg, Year of construction: 2019, operating hours: 5,017 h, nominal power: 170 kW (231.14 HP), machine/vehicle number: WLHZ1490LZC047884, Equipment: AdBlue, CE marking, air conditioning, TECHNICAL DETAILS Track width: 600 mm MACHINE DETAILS Dimensions & Weight Transport dimensions (L x W x H): 10,000 mm x 3,200 mm x 3,800 mm Unladen weight: 34,600 kg Engine brand: D934 A7-24 Njdpfxex Tqv No Ad Nskt Engine rated power: 170 kW Maximum speed: 52 km/h Operating hours: 5,017 h EQUIPMENT Air conditioning AdBlue system CE marking Hammer/shear hydraulic circuit Safety rupture valve – boom/lifting gear Safety rupture valve – dipper/boom Additional hydraulics Hydraulic circuit for tilt/rotator Battery isolator switch Rotating beacon Automatic lubrication system Steel tracks Standard excavator bucket Demolition/FOPS cab guard

Condition: good (used), Drill with coordinate table and sliding head Brand: IBARMIA Model: B70P Capacity: Up to 70mm drill Characteristic: - Transmission: By gears. - Coordinate table with 2 X-Y axes. - Automatic advance. - Number of automatic advances: 6 - Number of speeds: 24 - Chap. max. drilling capacity in 70Kg steel: 70mm - Chap. max. drilling capacity in 200Hb cast iron: 80mm - Electromagnetic clutch - Automatic tool ejector - Motorized moving head - Bidirectional rotation. - Head travel: 1500mm - ANILAM digital X,Y coordinate display. - Table tours: X570 x 260mm - Table dimensions: 500x1000mm - Manual oiler Cooling system using coolant. Nsdpfx Aeh Rydnjd Njkt It is delivered revised and with the protections for CE compliance.

Condition: ready for operation (used), functionality: fully functional, fuel type: diesel, shovel volume: 5 m³, Year of construction: 2016, operating hours: 9,118 h, machine/vehicle number: VCEL150HH00005075, Equipment: AdBlue, air conditioning, The wheel loader's tires have been renewed! TECHNICAL DETAILS Bucket capacity: 5 m3 MACHINE DETAILS Dimensions & Weight Transport dimensions (L x W x H): 9.1 m x 3.2 m x 3.9 m Unladen weight: 26,100 kg Fuel type: Diesel Engine brand: D13J Emissions level: Stage IV / Tier IV final Chassis type: Articulated Operating hours: 9,118 h Nodpfjx Tqm Ijx Ad Njkt EQUIPMENT Air conditioning AdBlue system CE marking

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1104104, measuring range X-axis: 1,205 mm, measuring range Y-axis: 2,005 mm, measuring range Z-axis: 1,005 mm, workpiece weight (max.): 2,000 kg, workpiece height (max.): 1,115 mm, The measuring table has been supplemented with milled aluminum plates. These plates are equipped with M6 holes in a 50 mm grid pattern, allowing for variable clamping options for workpieces. TECHNICAL DETAILS Measuring range X-axis: 1,205 mm Measuring range Y-axis: 2,005 mm Measuring range Z-axis: 1,005 mm Drive speed in CNC mode Traversing speed: 8–250 mm/s Nsdpsx U Sv Hsfx Ad Nokt Measuring speed: 1–3 mm/s Drive speed in J/S mode High speed: 0–80 mm/s Low speed: 0–3 mm/s Fine speed: 0.05 mm/s Acceleration Acceleration per axis: 0.1 G Max. acceleration: 0.17 G Resolution: 0.0001 mm Measuring table Material: Granite Working area: 1,408 mm x 2,980 mm Clamping threads: M8 x 1.25 Max. workpiece height: 1,115 mm Max. workpiece weight: 2,000 kg MACHINE DETAILS Dimensions & Weight Main unit dimensions (D x W x H): 3,230 x 2,150 x 3,585 mm Weight (incl. stand and control unit): 5,388 kg Compressed air supply Air pressure: 0.4 MPa Air consumption in normal operation: 100 L/min Air consumption from air source: 150 L/min Temperature conditions Ambient temperature: 16–26 °C Thermal fluctuation per hour: 2.0 K Thermal fluctuation per day: 5.0 K Thermal gradient vertical: 1.0 K/m Thermal gradient horizontal: 1.0 K/m Accuracy Accuracy to ISO 10360-2: E = 4.9 + 5L/1,000 Probing error Probing error ISO 10360-2 (TP2): R = 5.2 µm Probing error ISO 10360-2 (TP200): R = 5.0 µm EQUIPMENT Geopack Cosmos 2.3 software PH 10 probe head TP 200 Change rack Note: The machine was in operation until 2013, after which it was professionally dismantled by the manufacturer. The machine was then stored in an industrial hall. The last factory calibration was carried out in 2013. The calibration certificate is available as an attachment in the listing.

Condition: new, Year of construction: 2022, functionality: fully functional, Wema Probst RHM 250 II-H milling machine NEW - Diameters from 100mm to 250mm - Electronic feed control - 2 milling heads - Head 1 = diameter 150-300mm - Head 2 = diameter 100-250mm - feed speed 6-34m/min - complete electrical cabinet + control panel Nsdpfx Adsubbryj Nokt Wema Probst RHM 250 II-H milling machine NEW - Diameters from 100mm to 250mm - Electronic feed control - 2 milling heads - Head 1 = diameter 150-300mm - Head 2 = diameter 100-250mm - feed speed 6-34m/min - complete electrical cabinet + control panel

Condition: ready for operation (used), Year of construction: 2004, operating hours: 18,396 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain 530, number of axes: 3, In 2022, the tool magazine door was replaced. In 2023, the SIMODRIVE 611/18A servo converter was replaced! TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 450 mm Travel Z-axis: 450 mm Tool holder: SK 40 Number of axes: 3 MACHINE DETAILS Control: Heidenhain 530 Nsdjx Up E Eepfx Ad Njkt Operating hours Spindle hours: 18,396 Machine hours: 56,040