Used Hollow Spindle for sale (12,834)

Condition: excellent (used), Year of construction: 1988, operating hours: 9,807 h, functionality: fully functional, machine/vehicle number: 17483, NOTTMEYER KOMET SUPER S/PN - very well maintained - fully functional - available immediately Kedpfx Aox Af D Red Nswt

Condition: good (used), Centre height: 290 mm Swing diameter over bed: 580 mm Centre distance: 3000 mm Weight: 2800 kg Kwjdpfx Adjxtu Ero Nst Equipped with a ZIMMER DY 75 flat belt grinder, year of manufacture 2010, e.g. for shaft or tube grinding Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: ready for operation (used), Year of construction: 2006, Control Unit Brand FANUC Main Drive Number of axis 6 Spindle Speed 3600 RPM Spindle motor power 22 kW Movement X-Axis Movement 250 mm Y-Axis Movement 50 mm This 6-axis DOOSAN Puma TT 2500 SY was manufactured in 2006. It is a multi-spindle turning machine featuring twin spindles and twin turrets, equipped with a Fanuc 18i-TB control. Key specifications include a maximum turning diameter of 330 mm, turning length up to 500 mm, and bar capacity of 76 mm. Main spindle speed reaches 3500 RPM, while the sub-spindle can go up to 6000 RPM. If you are looking to get high quality turning capabilities consider the DOOSAN Puma TT 2500 SY machine we have for sale. Contact us for more information. Ksdpjx Rd Hvsfx Ad Nowt Application Types Turning

Condition: used, Year of construction: 1994, Motor 6 / 7.5 kW Worktable: 1200 x 730 mm + extensions Worktable height: 920 mm Spindle tilt: -10° + 45° Max. spindle projection above table: 175 mm Spindle speeds: 3250/6500-5000/10000 rpm Max. tool diameter: 250 mm Weight: approx. 950 kg Storage location: Nattheim Kwsdow Enw Iepfx Ad Not

Condition: good (used), Used Kölle tilting spindle milling machine Model F 45 Table size 1070 x 1000 mm Table height 850 mm Motor 5.5 HP / 400 V Right/left rotation Speed 2800/4500/6000/10000 rpm Spindle Ø 30 + 40 mm, Kodpfx Adev N Dcpe Nswt Spindle stroke 110 mm Electric height and tilt adjustment Swivel range -5 to +45 degrees Electric motor brake Aigner integral stop 650/650 mm Milling stop rotatable 360° Weight approx. 1050 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 11,500 h, machine/vehicle number: 3098, laser power: 10,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, working width: 2,000 mm, travel distance X-axis: 4,020 mm, travel distance Z-axis: 150 mm, Machine was overhauled in 2024. TECHNICAL DETAILS Working area: 4,020 mm Processing area: approx. 4,000 x 2,000 mm Maximum sheet thickness: 30 mm Maximum steel thickness: 30 mm Laser cutting head: EX-TRABEAM® Pro Laser source: IPG YLS 10000 U fiber laser source Laser power: 10,000 W Power: 10 kW (13.60 hp) Traverse speed: up to 100,000 mm/min Z-axis positioning speed: 18 m/min Z-axis travel: 150 mm Z-axis acceleration: 0.75 G Drilling Drilling range: Ø4 mm – Ø30 mm Holder: HSK-63 Thread cutting range: M5 – M20 Max. material thickness: up to 25 mm Power: 21 kW Revolutions: up to 10,000 rpm Tool cooling: internal cooling Tool change: automatic Drilling tool measurement: automatic Kwsdpfxjwyaxmj Ad Net MACHINE DETAILS Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90% Filter system: Donaldson DFPRO 6 Cyclopeel Fan capacity: 7.5 kW Volume flow: 4,500 m³/h Mechanics and Control Drives: maintenance-free Panasonic AC servo motors Measuring system: IRC 2500 (incremental encoder) Hold-down device: pneumatic Chip brush: available Laser hours: 6,900 h EQUIPMENT Documentation/manual Cooling unit Safety light barrier Fully automatic shuttle table Fully automatic HSK 63 drilling spindle Cleaning and calibration station LU3K Automatic nozzle changer with 8 nozzles Donaldson® filter unit DFPRO 6 Cyclopeel Asper Nesting® automatic nesting software Witt gas mixer Maintenance and support contract

Condition: excellent (used), EMCO Precision Lathe EMCOMAT 17 D Including 3-axis digital display EMCO Year of manufacture: 2007 with CE mark Centre distance: 700 mm Centre height: 170 mm Swing over bed diameter: ø 340 mm Swing over cross slide: ø 190 mm Bed width: 260 mm Longitudinal slide travel: 600 mm Cross slide travel: 220 mm Compound slide travel: 110 mm Cross slide length: 410 mm Cross slide width: 150 mm Kodpfx Adoxx S R Ao Nswt Bed slide guide length: 380 mm Tool shank section: 20 x 20 mm Distance spindle centre - compound: 34 mm Compound rest swivel range: 60 / 120° Main spindle: Spindle mount DIN 55029 (Camlock) Spindle bore: ø 50 mm Internal taper to DIN 7178 1 : 22 Spindle bearing diameter (front): ø 70 mm Max. chuck diameter: ø 200 mm Max. faceplate diameter: ø 200 mm Spindle speeds: 40 - 3000 rpm Infinitely variable speed control Mechanical speed ranges: 4 Main drive: Rated power at 40% duty cycle: 5.3 kW Max. rated torque at main spindle: 640 Nm Feeds: 20 (28) longitudinal feeds Z: 0.045-0.787 mm/rev 20 (28) cross feeds X: 0.023-0.406 mm/rev Thread cutting: 20 (28) metric threads (standard): 0.4 - 7.0 mm Tailstock: Quill diameter: ø 50 mm Quill taper: MT 3 Quill stroke: 120 mm Offset adjustment: ±13 mm Permissible workpiece weights: (between centers, unsupported): 50 kg, supported by tailstock: 150 kg Weight: 755 kg Dimensions: 1650 x 1060 x 1635 mm The EMCOMAT 17 D is a precision lathe suitable for all areas of mechanical engineering and for training purposes. Equipment: - EMCO 3-axis digital readout with color display - Potentiometer, EMERGENCY STOP button, digital speed display at the control panel beside the DRO - 3-jaw chuck - MULTIFIX quick-change toolpost, size B - Electrically interlocked chuck guard - Quick-action collet attachment - MICROJET coolant spray system - Chip guard at rear - Machine lamp - Machine feet - Bed stop Condition: Very good, from a training facility “Due to its quality and price, the machine is not suitable for private individuals.” Available from March 2026

Condition: excellent (used), Year of construction: 2004, We are offering an exceptionally high-quality precision lathe. Within its class, this is likely the best German lathe ever built. Kwodpew Rdthjfx Ad Net BOEHRINGER Precision Lathe Model DUE 500 Year of manufacture: 2004, including CE certification and central lubrication Machine No.: T1022.2027-00 Center height: 240 mm Swing diameter over bed: 500 mm Swing diameter over cross slide: 285 mm Center distance: approx. 1,200 mm Effective turning length: approx. 1,000 mm Bar capacity: 62 mm Spindle nose: DIN 55027 Size 6 Spindle bore: 100 mm Drive power: 11 kW Maximum torque: 2,000 Nm 24 spindle speeds: 11.2 – 2,240 rpm 60 cross feeds: 0.03 – 28 mm/rev 60 longitudinal feeds: 0.06 – 56 mm/rev Tailstock quill stroke: 190 mm Tailstock taper: MK 5 Machine footprint (LxW): approx. 4,000 x 1,525 mm Weight: approx. 4,300 kg Accessories: - HEIDENHAIN 3-axis digital readout - Central lubrication system - Electrically interlocked chuck guard - Coolant system - Chip protection rear panel - Röhm chuck, T 250 mm, with various jaws - Telescopic cover for lead and feed screw, support to bed - Machine lamp - Multifix C + 4 quick-change tool holders - Live center - Operating manual - Circuit diagram - Rapid traverse in longitudinal and cross slides Condition: The machine is in very good technical and visual condition. Backlash on cross slide approx. 0.3 mm, on compound slide approx. 0.15 mm Spindle nose runout approx. 0.006 mm Bed geometry: deviation approx. 0.01 mm over approx. 750 mm bed length (measured on flat guideway towards chuck using dial indicator) The following parts have been renewed: - Oil change - New hoses for central lubrication - New wipers - Key for operating lever replaced - Locking pin for interlock replaced Price is net, ex stock, loaded free of charge. Delivery by company truck can be arranged at extra cost.

Condition: good (used), WEILER Precision Lathe MADADOR with HEIDENHAIN 3-Axis Digital Readout Year of manufacture: approx. 1980, retrofitted with emergency stop and electrically interlocked chuck guard. Centre height: 145 mm Centre distance: 500 mm Swing diameter over cross slide: 160 mm Spindle nose: DIN 55022 size 5 Kwodpfx Adsxx S Hds Njt Spindle bore: 36 mm Spindle speeds: 30 – 3,000 rpm Motor power: approx. 3.0 kW Tailstock quill: MK 3 Quill travel: 90 mm Weight: approx. 620 kg Dimensions: 1420 x 700 x 1200 mm Technical data not binding! Robust lead and feed screw lathe for workshops and advanced DIY users Condition: good Equipment: - 3-axis precision digital readout HEIDENHAIN - Lever-operated quick-collet chuck system - Electrically interlocked chuck guard - Multifix tool post size A - 3-jaw chuck - Coolant system - Machine feet - Chip guard/rear splash guard - Machine lamp - Bed stop - Emergency stop button - Lockable tool compartment - Automatic feeds for longitudinal and cross slide Safety features: - Electrically interlocked chuck guard - Emergency stop button - Brake motor Available from March 2026

Condition: reconditioned (used), We are offering an exceptionally good precision lathe. The machine is probably the best German lathe that has been built in this class. BOEHRINGER precision lathe model DUE 800 Year of manufacture: 1984 Order no.: 04041.01-807 Center height: 400 mm Circulation diameter over bed: 820 mm Circulation diameter over facing slide: 515 mm Center width: approx. 2200 mm Effective turning length: approx. 2000 mm Bar passage: 128 mm Spindle head DIN55022 size 11 Drive power: 30 kW Max. Torque: 6300 Nm Kwjdpfx Adsrt T S Rs Njt 24 Speeds: 7.1 - 1400 rpm 60 face feeds: 0.05 - 28 mm/rev 60 longitudinal feeds: 0.06 - 56 mm/rev Rapid traverse in longitudinal cross feed Motorized top support Tailstock quill stroke: 280 mm Tailstock taper: MK 6 Space requirement: LxWxH approx. 6700x2500x2250mm Weight: approx. 7500 kg Accessories: 3-axis digital readout HEIDENHAIN Coolant device; chip protection rear panel, power chuck autoblock 500 mm with clamping jaws, roller conveyor cover for lead screw support to bed, machine light, chip conveyor, Parat basic holder incl. 11 holders, suction unit, 3-jaw steady rest with roller inserts (moving), emergency stop, chuck key, moving center point, operating instructions Condition: The machine is in very good technical and optical condition. Backlash in the top slide 0.1 mm and face slide 0.15 mm The geometry of the machine is also very good (was checked with a dial gauge) Measured on the flat track guide with dial gauge in the direction of the lathe chuck Bed wiper replaced, gearbox input shaft axial play compensated and bearings replaced, drive pins on motor/gearbox side replaced, shaft seals on lock case replaced, various bearings replaced The machine can be demonstrated under power. Functional videos can also be sent on request.

Condition: excellent (used), Multi-spindle & bar-turning lathes TRAUB TK 42 Kwsdjwc Aqdopfx Ad Nst * Spindle power 5.5 - 9 kW * Maximum workpiece length 206 mm * Spindle bore 42 mm * Length L - R 2500 mm * Width V - H 900 mm * Height 1700 mm * Tool changer holder 4 slides

Condition: excellent (used), Year of construction: 1991, Multi-spindle & bar turning machines TRAUB TD 26 1991 * Spindle power 2.2 kW * Number of spindles 4 * Spindle bore 26 mm * Speeds 1.18 > 4750 mm * Total power 3.2 kW * Length L - R 1800 mm * Width V - H 1000 mm * Height 1400 mm * Weight 800 kg * Tool changer 6 tools Additional information * Max. round: 26 mm, max. square: 18 mm, max. hexagon: 22 mm Kwodpfxowc Aqwe Ad Njt * * Bar loader available

Condition: used, Year of construction: 2011, turning diameter: 170 mm, spindle bore: 42 mm, CNC Lathe with 2nd Spindle, 2 turrets and Y-axis (7-axis) Control: Fanuc 31i-A Turning diameter: 170 mm Turning length: 503 mm Spindlebore diameter: 42 mm Spindle Nose: A2-5 Kodpsx N S Hzjfx Ad Njwt Spindle nose sub-spindle: A2-5 Spindle (left) speed 6.000 1/min Spindle (right) speed 6.000 1/min Movement X-axis: X1: 135 / X2: 135 mm Movement Y-axis: +/- 31 mm Movement Z-axis: Z1: 503 / Z2: 503 mm Min indexing C-axis right spindle 0,001 ° Min indexing C-axis left spindle 0,001 ° Number of tools on turret 2x12 Tool Type: BMT 44 Bar Feeder: Iemca Boss 525E (Year 2011) Machine weight: 5,650 kg. If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Technical details: Kwodpfevb A Ubox Ad Not turning speeds: 10000 U/min output: 22 kw weight approx.: 20 kg transmission ratio: 1: 4,3 high speed spindle with 1 : 4,3 ratio, MK 5 spindle taper and collet chuck for tooling. Misc. parts in wooden case. *

Condition: new, Year of construction: 2025, Sturdy cast steel construction With rigid milling spindle 3 spindle speeds 3500 to 10000 min¯¹ Milling spindle with right-left rotation Large dimensioned milling unit made of grey cast iron, directly mounted to the table With suction hood under the worktable for better extraction Solid and precise cast iron table Quick and easy speed change Powerful motor with 5,0 kW Standard arc milling protection hood Quality Made in Italy Equipment details Cast iron milling unit Directly mounted on the milling table Milling spindle mounted high up with precision ball bearing, thus lowest possible bearing load and longest possible service life 3 milling speeds from 3500 to 10000 min¯¹ Powerful motors equipped with powerful three-phase motor Milling guard The standard milling guard is equipped with a height-adjustable guide rail and guard plate as standard for maximum safety. Milling fence Precise milling fence with a quick adjustment and a fine adjustment with scale on the fence jaw. The integrated suction connection ensures a clear view Kodshp Rcrjpfx Ad Nowt Milling table opening A large milling table opening also allows the use of larger flattening cutters and tenoning and slotting tools above and below the table Curved milling protection hood Included as standard Reversible fence jaws versatile integratable stop for bridging the tool gap enables safe working even with narrow workpieces TECHNICAL DAY

Condition: as good as new (ex-display), Year of construction: 2025, Minimax ti 55es LL - spindle moulder Figure shows 55 i T s standard version elite The professional craftsman machine with Swivel Milling spindle and 4 speeds. M Digital: motorized height adjustable and Tiltable Stable steel-cast iron construction Large dimensioned milling unit of grey cast iron, swivel up to 45 ° to the rear Display of the cutting speeds by LEDs Quick and easy change of speed of eccentric tension Right left rotation Display height and inclination 1/10 mm exactly Shaper fence heavy-duty professional: with fine adjustment via rack and pinion, with numerical display, ALU stop baking, 3-fold positioned for quick repeat of setting Scope of delivery: Aluminium milling stop baking Milling wheel arch guard Extension table left and right Model minimax ti 55es LL Item No. 5502252 Kjdpodqzh Rjfx Ad Nowt Technical data Dimensions of the working table 2500 x 655 mm Formatschiebeschlitten commercial length of spindle dimensions 125 mm Max tool diameter 240 mm Max tool diameter lowerable 230 mm Max tool-Ø pin cutter 320 mm Spindle inclination 0-45 degree Speed 3500/6000/8000/10000 min-1 Engine power 400 V / 50 Hz / S6-40% 5.0 kW Suction nozzle diameter 2 x 120 mm

Condition: excellent (used), Year of construction: 2001, Optimum D 1340 GDE year 2001, top condition - as a training machine - Turning diameter over bed 330 mm Turning diameter over support 160 mm Turning length 800 mm Total power requirement 2 kW Machine weight approx. 400 kg Space requirement approx. Kedpfx Aevutyhod Newt 2000x1000x1600 mm Bar diameter 38 mm Speed range 70 - 2000 rpm Spindle nose Feed range 0.025 - 2.553 mm/rev Suitable for threads: Metric 0.25 - 11 mm Suitable for threads: Inch 4 - 112 Gg/" Tailstock: MK 3 Control Conventional 3-jaw chuck Location: from stock 54634 Bitburg - available at short notice -

Condition: new, Year of construction: 2025, Martin T 27 Flex Swivel Spindle Moulder – double-sided tilting – Flexibility for today and tomorrow. Setting up a tilting spindle moulder is usually a major challenge. Not with the T27 Flex and its modern touchscreen control: thanks to integrated tool offset management, you can set up even complex moulding profiles with a tilted spindle in no time. This allows you to make full use of the wide swivel range of 2 x 46°, letting you follow your requirements with complete flexibility. Additionally, the machine can be configured precisely to suit the specific needs of your operation. Equipment includes: - T 27 Flex - T 2711-a Digital indication of fence jaw position via the control system - T 2731-a Table extension on both sides + extendable workpiece support - T 2740-a Centrex guard - T 2742-a Integral fence - T 2743-a Auto Lock spindle moulder fence jaw clamping system - T 2790-La Console for feed unit stand, left side attachment The photo shows a sample machine only / feed unit and support not included Kwedpfer Hr D Nex Ad Net Included scope of delivery is described in the text above Location: Arriving in stock at 54634 Bitburg - Available in two weeks -

Condition: ready for operation (used), functionality: fully functional, Machine has drilling / threading unit fitted on Kwedjxz R Ilepfx Ad Net It is included barfeeder.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, Cost savings for the end user €38,000 vs. €21,000 DMA supplies high-quality CNC drilling machines at bargain prices by eliminating expensive service contracts and installation visits. Ideal for professionals who want to remain in control themselves. The purchase price includes: - CNC controller - CNC Cam - Starter kit of drilling tools Focus on functionality: Your machine, your management, our lowest price. No. 7 vertical rows No. 1 TH1 horizontal double spindle (X-axis) for front/back drilling Manual panel alignment END PANEL READER for perfect matching Remote support software Extraction flange Scratch-resistant BRUSH TOP to prevent accumulation of dust and chips Work MODE selectable at the operator side or in continuous cycle Kwodpfox R Drxsx Ad Nst HARDWARE AND SOFTWARE 12" touchscreen with MAGGI patented NO TEXT system USB port and Ethernet port for file import, online support, and software updates Linux kernel-based system Fobmsu U Hgiegku S Hepp CNC memory for up to 1,000 programs

Condition: used, Year of construction: 1994, functionality: fully functional, turning diameter: 170 mm, SECOND-HAND COPYING LATHE WITH 4 SPINDLES BACCI TYPE T4MO - Max turning diameter 170 mm - Max working length 1000 mm - Longitudinal sanding unit - Nr. 4 spindle - Year 1994 Ksdpox Rw Iyefx Ad Newt

Year of construction: 2021, condition: refurbished (used), Spindle motor overhauled for JUNG HF50 / JF520 electrically overhauled / newly mounted and balanced exchange delivery possible, depending on availability Kjdpfx Adohcn Spj Njwt

Year of construction: 2021, condition: new, Conversion kit for JUNG HF50 from Leonhardt control set to Thyristo control. Can also be carried out "on site" if necessary. Kwodohcn Hyepfx Ad Net

Condition: new, Year of construction: 2012, hydraulic linishing or polishing unit for hollow ware like cooking pots Kwodobdnuaepfx Ad Nst

Condition: good (used), Kern lathe D 23 V with Forkard lathe chuck Multifix B digital display Kedpfxsvl Ig Do Ad Nowt