Used Hinomoto C 174 for sale (55,422)

Condition: excellent (used), CTS Climate Test Chamber CS-70/600-5/S Device Data Manufacturer: CTS GmbH Model: CS-70/600-5/S Design: Climate Test Chamber Cooling: Water-cooled Description Used climate test chamber from CTS. Suitable for temperature, climate, and stress screening tests. For use in industry, research, and quality assurance. Operating Condition Display: Manual mode / Warning (Drain water bath). Operating Hours Total: 19,788 h Compressor cooling: 8,699 h Compressor pre-cooling: 11,432 h Pump circulation: 2,905 h Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 18.4 kW Current: 30.6 A Protection class: IP 22 Refrigeration System Refrigerants: R404A / R23 Pre-cooling stage: 5.0 kg Cooling stage: 2.1 kg / 14.5 bar CO₂ equivalent: 19.61 t / 30.93 t GWP: 3922 / 14800 Pressure Data PS: 25 bar PT: 27.5 bar Features Observation window Stainless steel test chamber CTS touch/LCD control panel Programmable operation Specimen protection / temperature limiter Water-cooled refrigeration unit Humidity system with water bath Automatic water refilling possible Interfaces (RS232 / Ethernet) Integrated control cabinet Industrial version Feedthroughs 1x NW 50 2x NW 125 Dimensions Interior: approx. 850 x 850 x 830 mm Pgedpfxey H Hmwe Ahyjk Exterior: approx. 1900 x 1120 x 1875 mm Weight Approx. 750 kg Scope of Delivery CTS Climate Test Chamber CS-70/600-5/S Documentation / Test certificates (if available) Pre-shipment Service (optional) Functional test Refrigerant service Leak test Test run with protocol Condition Used. Visual condition see pictures. Note Used equipment, sale without warranty. Inspection by arrangement possible. Loading and transport can be organized upon request. Subject to changes and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), CTS Climate Test Chamber C-70/600 Device Data Manufacturer: CTS GmbH Model: C-70/600 Design: Climate Test Chamber Cooling: Water-cooled Description Used climate test chamber from CTS. Suitable for temperature and climate testing. Intended applications include industry, research, and quality assurance. Podpfx Ajy H Hl Hehyogk Technical Specifications Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 8.7 kW Current: 14.8 A Protection class: IP 22 Cooling System Refrigerants: R404A / R23 Cascade refrigeration system Low-temperature operation down to -70 °C PS: 25 bar PT: 27.5 bar Features Observation window Stainless steel test chamber Digital setpoint/actual value display Test specimen protection / Temperature limiter Water connection (deionized water) Condensate drain Cable ports RS232 interface Digital outputs Dimensions Internal: approx. 850 x 850 x 830 mm External: approx. 1900 x 1115 x 1850 mm Weight Approx. 600 kg Scope of Delivery CTS Climate Test Chamber C-70/600 Documentation (as available) Service prior to delivery (optional): - Functional check - Refrigerant service - Leak test - Test run with protocol Condition Used. Visual condition as shown in the images. Note Used equipment, sold without warranty. Inspection by appointment possible. Loading and transportation can be organized upon request. Subject to prior sale and changes. If you have any questions, feel free to contact us.

Condition: excellent (used), CTS Temperature Shock Test Chamber TSS-70/350-A Device Data Manufacturer: CTS GmbH Model: TSS-70/350-A Year of manufacture: 10/2017 Version: Temperature Shock Test Chamber Cooling unit: Water-cooled Description Used temperature shock test chamber by CTS. Suitable for shock and temperature cycling tests. For use in industry, research, and quality assurance. Areas of Application - Material testing - Aging tests - Electronics and component testing - Temperature shock tests - Automotive and QA Temperature Ranges Hot chamber: +50 °C to +220 °C Cold chamber: -70 °C to +100 °C Electrical Data 400 V / 3/N / 50 Hz Power: 19.8 kW Current: 46.5 A Connection: CEE 63A Refrigeration System Precooling: R452A, 7.2 kg Cooling stage: R23, 2.8 kg CO₂ equivalent: 15.41 t / 41.59 t Water-cooled Pressure / Protection PS: 25 bar PT: 27.5 bar IP 54 Features - Touchscreen control - Microprocessor controller - Programmable operation - Digital setpoint/actual display - 2-zone system - Transfer cart for rapid specimen transfer - Viewing window - Integrated control cabinet - Cooling water connections Technical Construction - Separate hot and cold chambers - Stainless steel test space - Industrial-grade construction Dimensions External: 2335 x 940 x 1820 mm Handling dimensions: 1990 x 940 x 1652 mm Internal: 410 x 480 x 660 mm Weight Approx. 950 kg Documentation - Declaration of conformity - Test certificates - Operating manual - Circuit and piping diagram - Spare parts list Service before delivery (optional) - Functional check - Refrigerant service - Leak test - Test run with log Condition Used. Cosmetic condition as shown in photos. Scope of Delivery Pgsdpfx Ahsy H Hk Ajyok - Test chamber TSS-70/350-A - Documentation (where available) Note Used machine, sale without warranty. Inspection can be arranged upon request. Loading and transport can be organized if required. Subject to prior sale and technical modifications. For any questions, please feel free to contact us.

Condition: used, Vötsch Type: NTUD 125/130/125 Pass-through oven Last maintenance: 3.12.25 Temperature control in 3 zones: Control of the internal temperature via an electronic temperature control system, divided into 3 separate temperature zones and controlled by semiconductor switching devices. This ensures good temperature uniformity whether operating in fresh or recirculated air mode. Temperature program control: The CTC control system is operated via a dialog PC with TSI software for the heating control of each temperature zone, as well as the activation of the recirculation fans and damper control. Horizontal airflow with reversal: By switching the electronically or pneumatically actuated dampers, the airflow direction can be set from left to right or right to left. The airflow direction for each of the 3 zones can be independently adjusted. Vertical airflow: Psdjy H Akropfx Ahyegk By shifting a cover plate in the oven ceiling. Useful floor area: The floor area can be driven on using customer-provided loading trolleys. Recirculation fans: Each zone is equipped with a radial fan. Usable space dimensions: 1300 mm height / 1250 mm width / 1250 mm depth External dimensions: 2490 mm height / 1770 mm width / 1810 mm depth Volume: 2000 liters Connection rating: 400V(N)PE AC 50/60 Hz 22 kVA Rated current: 32 A Power: 18 kW Nominal temperature: 50 to 150°C Weight: 1000 kg Condition: used Scope of delivery: (See photo) (Specifications and data subject to change and errors excepted!) We are happy to answer any further questions by phone.

Condition: good (used), Year of construction: 2006, Skeleton Transfer Cylinders Komorimatic Dampening Unit PDCS II: Print Density Control KMS 4 - Komori Monitoring System PQC-S Console KHS -AL: Pre-Inking System AMR (Automatic-Make-Ready) FAPC: Fully Automatic Plate Change IR Dryer + Hot Air Dryer Coating System Tresu with Doctor Chamber Blade Impression Cylinder Washing Device Blanket Washing Device Ink Roller Washing Device Grafix: Powder Sprayer Raised Automatic Paper Size Adjustment Pgedpfsy Hwyujx Ahyek Technotrans Alpha C. Refrigeration Ink. Temperature Control (Watercooled) Watercooled Press Extended Delivery Impression Account: 160 Mio.

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: SN 336, cutting force: 420 t, power: 80.9 kW (109.99 HP), total width: 2,800 mm, total length: 15,000 mm, total height: 3,400 mm, overall weight: 54,000 kg, cutting length (max.): 2,000 mm, year of last overhaul: 2016, Used hydraulic scrap shear LEFORT 420 t Type C 420TD Including HF radio remote control Can be installed without foundation – machine is mounted on a 300 mm steel frame, including 4 side supports for independent loading and unloading. Cutting force 4200 kN Cutting width 800 mm (blade 820 mm) Pjdpfx Ahsy Hq Eqoyegk Cutting height 520 mm

Condition: used, Year of construction: 1989, Capacity: 80 ton Throat depth: 280 mm Ram stroke: 8 - 140 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 520 mm Table surface area : 850 x 670 mm Podpfx Ahsy Hqz Sjyogk Slide area: 550 x 400 mm Hole in table: 250 x 180 mm Number of strokes: 20 - 100 s.p.m. Required power: 7,5 kW Dimensions L x W x H: 2210 x 1510 x 2750 mm Oil volume: 50 l Die weight at the ram max.: 300 kg Weight of machine approx.: 8,3 ton

Condition: good (used), mileage: 1 km, power: 107 kW (145.48 HP), first registration: 02/2012, fuel type: diesel, tire size: 195/75R16, axle configuration: 4x2, wheelbase: 3,860 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro5, suspension: steel, number of seats: 3, total length: 7,400 mm, total width: 2,250 mm, total height: 2,500 mm, loading space length: 5,400 mm, loading space width: 1,100 mm, loading space height: 500 mm, Year of construction: 2012, Equipment: ABS, air conditioning, central locking, electric window regulation, trailer coupling, = Additional options and accessories = Pgedoy Hqq Hjpfx Ahyek - Halogen lamp - None - Manual - Fabric - Partition wall = Notes = Configuration: 4x2, twin rear wheels, payload: 1,050 kg, curb weight: 2,450 kg, gross vehicle weight: 3,500 kg, unbraked trailer load: 750 kg, drawbar trailer load, braked: 3,500 kg, towbar, cab type: single cab, air conditioning, parking assistance: none, electric windows, partition wall, color: white, lighting type: halogen lamp, engine power: 107 kW (143 HP), fuel: diesel, Euro 5, drive technology: timing chain, transmission: manual, gears: 6, power steering, ABS, starter battery, roof rack: none, rear closure: tail lift, central locking, seats: 3, seating arrangement: 1+2, seat upholstery: fabric, manual seat adjustment, 15 XXL ac 3.0 Di towbar 3,500 kg, spare wheel, tire type: summer tires = Further information = Axle configuration Tire size: 195/75R16 Brakes: disc brakes Suspension: leaf suspension Axle 1: tire tread left: 5 mm; tire tread right: 6 mm Axle 2: twin wheels; tire tread left inside: 5 mm; tire tread left outside: 5 mm; tire tread right inside: 4 mm; tire tread right outside: 4 mm Weights Unladen weight: 2,450 kg Payload: 1,050 kg Gross weight: 3,500 kg Functional Loading platform height: 100 cm Maintenance APK (technical inspection): valid until 01/2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Identification Registration: VBN-15-T = Company information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offer covers all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing inventory • Recognized quality • Good prices • Proper business practice • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates quickly arranged • Expert technical services • The security of 'recognized quality' • And more… Please visit our website for special offers and complete stock list. Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry through our website. Ask about our European warranty package directly.

Condition: good (used), Year of construction: 1994, functionality: fully functional, Pressure: 160 t Bending length: 3,200 mm Control unit: CYBELEC CybTouch 15 PS Machine weight approx.: 14,000 kg Accessories/Equipment: - Control unit retrofit March 2025 – CYBELEC CybTouch 15 - Foot switch - Tools Pjdpfxsxb Sm Nj Ahyjgk

Condition: excellent (used), functionality: fully functional, mileage: 23,887 km, power: 103 kW (140.04 HP), fuel type: diesel, gearing type: mechanical, wheelbase: 4,035 mm, overall weight: 3,500 kg, empty load weight: 2,165 kg, maximum load weight: 1,335 kg, first registration: 06/2024, next inspection (TÜV): 01/2027, loading space length: 4,000 mm, loading space width: 1,850 mm, loading space height: 1,920 mm, emission class: euro6, color: white, number of seats: 3, number of previous owners: 1, trailer load unbraked: 3,000 kg, machine/vehicle number: EULK9853, Equipment: ABS, USB port, additional headlights, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, rear view camera, second-hand vehicle warranty, sliding door, soot filter, trailer coupling, truck registration, winter tires, Special equipment: Storage compartment in the center console and fold-out clipboard Tow bar (not removable) Exterior mirrors electrically adjustable/heated/foldable Rear parking aid Rear doors 270° opening angle Clipboard incl. smartphone/iPad holder, interior fittings MOVANO CARGO Radio BT with DAB+ Radio Multimedia with DAB+ Sliding door on passenger side without window Fabric darko anthracite Blind spot warning in both exterior mirrors (active between 10 km/h and 140 km/h) Partition closed Paneling in the loading/FG area: half-height Reinforced springs at the rear Standard equipment: Airbag on driver's side Pgedey Hkicspfx Ahyek Anti-lock braking system (ABS) Drive type: front-wheel drive Electronic. Stability program (ESP) Driver assistance system: Hill start assist Generator 180 A Gearbox 6-speed Body/structure: Box Body variant: Vehicle length L4 L4H2, 3.5 t L4H2, 3.5 t, FWD, SRW Load compartment partition closed (without window) Steering column (steering wheel) adjustable Engine 2.2 ltr. - 103 kW CDTI Radio preparation, 4 speakers Wheelbase 4035mm Low emissions according to Euro 6d emissions standard

Condition: excellent (used), CTS Type: TSS-70/350-A Water-cooled refrigeration unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. This unit is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Typical applications: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical specifications: Type: TSS-70/350-A Temperature range: Warm chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Refrigeration system: Refrigerant: R404A / R23 Precooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg Water-cooled Features / Equipment: - CTS control panel with touch display - Microprocessor-controlled regulation and monitoring system - Program operation - Digital setpoint and actual value display - 2-zone system (warm and cold chamber) - Automatic transfer basket for shock tests Technical design: - Warm and cold chamber separated - Transfer basket system for rapid temperature change - Test chamber made of stainless steel - Insert shelf / wire rack - Viewing window in door - Water cooling connections available - Integrated control cabinet Dimensions: External dimensions (HxWxD): approx. 2335 x 940 x 1820 mm Installation dimensions (HxWxD): approx. 1990 x 940 x 1652 mm Internal dimensions (HxWxD): approx. 410 x 480 x 660 mm Weight: approx. 950 kg Additional data: Protection class: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your safety as a buyer, please note the following information! The following points are carried out on the chambers we offer before sale: 1. Functional check and replacement of necessary components 2. If needed, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run Condition: used Scope of delivery: see pictures Psdpfx Asy Hkgbohyogk (Specifications subject to change and errors excepted!) We are happy to answer any further questions by phone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled chiller unit For sale is a high-quality thermal shock test chamber manufactured by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for thermal shock testing and is commonly used in industry, research, and quality assurance. Application fields: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K over time ±2 K spatially Temperature change rate: Max. 100 K/min on average for shock test cycles (without radiant heat) Transfer rate: ≤ 15 min in the range -65°C to +200°C with 10 kg ICs Transfer time: Pgedpey Hkfdjfx Ahysk < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 16.7 kW Nominal current: approx. 26.8 A Site-side fuse: 32 A slow-blow Connection: Cekon 32 Cooling system: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features and equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Program operation (up to 100 test programs) - Digital setpoint/actual value display - RS232 interface - 2 free switching channels for controlling test objects on-site - Fault alarm with floating contact (rated for up to 30 V-DC, 2 A) - EMC tested Technical design: - Hot and cold chambers - Transport basket with spindle drive - Test chamber / basket made of stainless steel, Material no. 1.4301 - Insert basket made of stainless steel wire - Pipe duct NW 50 with closing plug - Compressed air connection 1/4" male - Pressureless condensate drain R 1/2" internal thread - Safety door lock - Lockable door with window Dimensions as per installation drawing: External dimensions approx.: 2335 x 940 x 1820 mm Entry dimensions approx.: 1990 x 940 x 1652 mm Test chamber dimensions: Height approx. 410 mm, Width approx. 480 mm, Depth approx. 660 mm Window: 300 x 300 mm Further data: Degree of protection: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average power consumption per test cycle: approx. 8 kWh For your assurance as a buyer, the following procedures are performed on all offered chambers beforehand: 1. Function check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented trial run Condition: used Scope of delivery: see pictures (Specifications subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Psdpfxjy Hkd Hj Ahyegk Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: excellent (used), CTS Climate Test Chamber Type: CS-70/1000-5 Water-cooled condenser Year of manufacture: 08/2018 For sale is a high-quality climate and temperature test chamber manufactured by CTS (Clima Temperatur Systeme), model CS-70/1000-5. This unit is designed for the simulation of various environmental conditions and is typically used in industrial, research, and quality assurance settings. It allows for precise testing under extreme temperature and humidity conditions, such as: - Material testing - Aging tests - Electronics and component testing - Climate and environmental simulations Thanks to its large test chamber (1000 liters) and high-performance control system, it supports both rapid temperature changes and constant long-term tests. The system is water-cooled, ensuring stable and efficient operation. Technical data: Model: CS-70/1000-5 Test space volume: approx. 1000 liters Control system: - Multi-touch controller with integrated program generator - Programmable test sequences Side pipe / cable ports: - 1x port NW 50 - 1x port NW 125 Temperature range: - –70 °C to +180 °C - Change rate: up to 5 K/min - Temperature stability: ±0.3 K Climatic data (humidity): - Humidity range: 10% to 98% r. h. - Dew point range: –10 °C to +94 °C Dimensions: - External (HxWxD): approx. 1950 × 1270 × 2245 mm - Internal (HxWxD): approx. 900 × 1000 × 1100 mm Electrical data: - Connection: 400 V / 3/N / 50 Hz - Power: 17.6 kW - Rated current: 28.5 A Refrigeration system: - R452A – 5.1 kg – GWP 2140 - R23 – 2.1 kg – GWP 14800 - Operating overpressure PS: 25 bar - Test pressure PT: 27.5 bar - Protection rating: IP 22 Weight: approx. 900 kg For your safety as a buyer, please note the following: The following procedures are carried out on our offered chambers before sale: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant if required Pgsdpfx Ajy Hkc Aohyok 3. Leak test with certificate 4. Documented test run Condition: used The unit can be fully inspected as depicted in the photos. Display: STOP / manual mode Scope of delivery: - CTS climate test chamber CS-70/1000-5 - Delivery as shown in the photos Inspection by appointment is possible. Loading by forklift can be organized. (Subject to changes and errors in technical data!) We are happy to answer any further questions by phone.

Condition: excellent (used), ESPEC Climate Test Chamber Type: ARS-0680-AE ESPEC Climate Test Chamber / Environmental Simulation Chamber Rate of Change: up to approx. 5 K/min Model: ARS-0680-AE Year of Manufacture: 2018 For sale is a high-quality ESPEC climate test chamber for precise temperature and humidity testing in research, development, quality assurance, and industry. The unit is in used condition and can be fully inspected as shown in the images. The current display reads STOP / Ready for operation. Operating hours (according to display): approx. 6,950 hrs. Technical Data: Model: ARS-0680-AE Test chamber volume: approx. 680 liters Temperature range (typical for ARS-Series): approx. -70 °C to +180 °C Humidity control: available Rate of change: up to approx. 5 K/min Internal dimensions (W x H x D): 850 × 1000 × 800 mm External dimensions (W x H x D): 1050 × 1955 × 1805 mm Electrical connection: AC 400 V / 3~ / 50 Hz Max. current consumption: 27 A Weight: approx. 615 kg Year of manufacture: 2018 Cooling: air-cooled (no external water connection required) Refrigerants according to nameplate: R452A – 2.3 kg – GWP 2141 R23 – 0.65 kg – GWP 14800 Features / Equipment: Touchscreen control panel Programmable operation and constant operation modes Observation window in the door Stainless steel test chamber Chamber lamp / interior lighting Side ports for pipe and cable entry Ethernet interface Specimen temperature input Power supply control for specimen Time signal outputs Water tank system for humidity control Mobile/caster-mounted design Pjdsy Hkb Sopfx Ahyjgk Weight: approx. 615 kg For your safety as the buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. If necessary, new refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Scope of Delivery: ESPEC Climate Test Chamber ARS-0680-AE incl. available documentation Scope of delivery as shown in the images Condition & Notes: Condition: used Inspection possible by prior arrangement. Loading by forklift can be arranged. (Subject to change, prior sale, and errors in technical data!) If you have any questions, please feel free to contact us.

Condition: excellent (used), CTS Model: CS-70/600-5 Climate Test Chamber CTS CS-70/600-5 Water-cooled version With observation window, test specimen protection, and documentation For sale is a high-quality CTS climate test chamber, model CS-70/600-5, suitable for precise temperature, climate, and stress screening tests in research, development, quality assurance, and industry. The unit is in used condition and can be inspected in detail as shown in the images. Current display: manual operation / stop. Operating hours according to display: Technical Data: - Temperature range: -70 °C to +180 °C - Humidity range: 10% to 98% RH - Dew point range: -10 °C to +94 °C - Test chamber volume: 600 liters - Temperature change rate according to IEC 60068-3-5: - Heating: 6.0 K/min - Cooling: 7.0 K/min - Electrical connection: 400 V 3/N 50 Hz - Nominal power: 14.6 kW - Nominal current: 22.0 A - Protection class: IP 22 - Refrigerants: R404A / R23 - Pre-cooling stage: R404A – 4.5 kg - Cooling stage: R23 – 2.1 kg / 14.5 bar - CO2 equivalent: 17.65 t / 31.08 t - GWP: 3922 / 14800 - Operating overpressure PS: 25 bar - Test pressure PT: 27.5 bar Features / Equipment: - Observation window in the door - Stainless steel test chamber - LED test chamber lighting - CTS LCD control panel with digital controller - Test specimen protection / temperature limiter - Water-cooled refrigeration unit - Automatic water top-up / deionized water inlet - Test chamber and condensate drain - Volt-free contact - Digital outputs - RS232 interface - Ethernet interface - Lateral cable ports Cable ports according to installation plan: - 1x port NW 50 - 2x port NW 125 Test chamber dimensions according to installation plan: - approx. 850 x 850 x 830 mm External dimensions according to installation plan: - approx. 1900 x 1120 x 1875 mm Weight / Mass according to documentation: approx. 750 kg Scope of delivery: - CTS climate test chamber CS-70/600-5 - Including available documentation / test certificates - Delivery includes everything shown in the images Buyer assurance: - The unit can be viewed by appointment. - Loading by forklift can be arranged. - For any questions, please do not hesitate to contact us. Buyer safety information: The following steps will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Pedpfxsy Hkble Ahyogk Condition: Used (Changes and errors in the technical data reserved!) We are happy to answer further questions by phone.

Condition: excellent (used), CTS Model: C-70/600 CTS Climate Test Chamber C-70/600 Water-cooled version with observation window, specimen protection, and documentation For sale is a high-quality CTS climate test chamber, type C-70/600, suitable for precise temperature and climate testing in research, development, quality assurance, and industry. The equipment is in used condition and can be inspected fully as per the images provided. Current display shows manual operation / stop, actual temperature 16.59 °C, setpoint 5.00 °C, actual humidity 39.7% r.h., and water reservoir actual value 11.0 l. Technical Data: Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% r.h. Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical connection: 400 V 3/N 50 Hz Nominal power: 8.7 kW Nominal current: 14.8 A Protection class: IP 22 Refrigerants: R404A (pre-cooling stage) / R23 (cooling stage) Cascade refrigeration unit for low temperature operation down to -70 °C Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Features / Specifications: Observation window in the door Stainless steel test chamber CTS control panel with digital setpoint/actual value display Specimen protection / temperature limiter Water connection / deionized water inlet Test chamber and condensate drain Tubing ports on the side of the chamber RS232 interface as per documentation Digital outputs for specimen control Pgodpfx Ahjy Hkazsyek Test chamber dimensions (as per documentation): approx. 850 x 850 x 830 mm External dimensions (as per documentation): approx. 1900 x 1115 x 1850 mm Weight (as per documentation): approx. 600 kg Scope of delivery: CTS Climate Test Chamber C-70/600 including available documentation / operating manuals Scope of delivery as shown in the images For your safety as the buyer: The equipment can be inspected by appointment. Forklift loading can be arranged. Additional assurance for you as a buyer: The following measures are undertaken on all chambers offered: 1. Function check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used (Subject to changes and errors in technical specifications and details!) For further questions, we are happy to assist you by phone.

Condition: ready for operation (used), Year of construction: 1985, operating hours: 29,192 h, spindle speed (max.): 4,000 rpm, total height: 2,988 mm, total width: 4,288 mm, overall weight: 9,000 kg, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, product length (max.): 4,152 mm, number of axes: 3, This 3-axis MAHO MH 1000 C/A was manufactured in 1985. It has approximately 29,192 machine hours and includes manuals and documentation. The protective doors are partially disassembled but included. If you are looking to get high-quality machining capabilities, consider the MAHO MH 1000 C/A universal machining centre we have for sale. Contact us for further details. Pgodpfx Aey Hizqohyok Tool interface ISO 50Quill stroke vertical spindle mm 100Spindle speed range rpm 20–4000Spindle speed override % 80–120Feed rate X Y Z mm/min 1–4000Feed force X Z N 8000Feed force Y N 24000Rapid traverse m/min 10Feed and rapid override % 0–140Table diameter mm 1250Table length mm 800Center bore mm 42 H7T-slots 7T-slot spacing mm 100Manual cross adjustment mm 275Table indexing ratio 1:120Table rotation per handwheel turn deg 3Table rotation per division deg 2Positioning resolution deg 0.001Increment per division mm 0.026Table swivel X-axis deg ±30Table swivel Y-axis deg ±30Table rotation deg 360Table clamping pressure bar 80Max table load kg 800Table weight kg 1100Voltage V 220/380Frequency Hz 50Total connected load kVA 36Total load with coolant kVA 41Total load with coolant and tool changer kVA 46Positioning resolution mm 0.001Machine hours approx h 29192Condition currently idle not in operationDocumentation manuals availableProtective doors partially disassembled includedIncluded accessories none tool holders not includedTable axis one axis manual only not referenceable error present

Condition: new, Year of construction: 2024, operating hours: 1 h, GG06C Loader New Günter Grossmann GG06C compact cab loader. The Günter Grossmann GG06C loader (600 kg payload) is brand new. Günter Grossmann is a high-quality machine made for a European company. The shovel is very powerful and can work under all conditions. The loader is very fine. The control panel is very nice and clear. The machine has a very durable structure. The machine is equipped with a quick coupler that allows you to quickly change accessories. We are manufacturer and guarantee high quality. We have representation in every EU country. We stock all spare parts for our branded machines in Europe Please contact us for an appointment Pgodpjtydayofx Ahysk Gunter Grossmann machine a Very durable, strong excavator model: available models GG800 GG1000 and the GG1600 GG1700 And more from the international brand Günter Grossmann. Each Günter Grossmann machine is covered by the company warranty. a great machine for the most demanding construction,excavation,earthworks for all our machine,s you can contact us for an appointment to see or test one of the machine,s this can with us 7 days a week also we are available in the evening hours so that your normal work can continue. Specification GG06C Specification Bucket capacity (CBM): 0.3 Loading capacity: 600kg Machine weight: 1670kg Engine: Perkins Engine power: 25 HP Dimensions (L x H x D) 3325 x 2360 x 1155 Wheel dimensions: 27*8.5-15TL Heated cabin: Yes MAIN DIMENSIONS Length: 3325 mm Width: 1155 mm Height: 2360 mm WORKING RANGE Lifting height: 2.6 m Speed: 18 km/h ACCESSORIES to order Hay forks: Pallet forks 4in1 spoon (crocodile) Hay grab: Snowplow:

Condition: good (used), functionality: fully functional, machine/vehicle number: RQN777, mileage: 46,190 km, power: 130 kW (176.75 HP), first registration: 05/2024, fuel type: diesel, empty load weight: 2,506 kg, maximum load weight: 994 kg, overall weight: 3,500 kg, next inspection (TÜV): 03/2028, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, total length: 6,680 mm, total width: 2,190 mm, total height: 3,075 mm, loading space length: 4,150 mm, loading space width: 2,100 mm, loading space height: 2,100 mm, Year of construction: 2024, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, air conditioning, airbag, car registration, central locking, cruise control, electric window regulation, electronic stability program (ESP), full service history, onboard computer, power assisted steering, power mirror, soot filter, spoiler, start-stop system, Box body Tail lift Spare wheel Spare wheel with steel rim Air conditioning Exterior mirror (passenger side) electrically adjustable Driver armrest Stop & Start Cruise control Speed limiter Cruise control Podpfoyw Ivuex Ahysgk Speed limiter

Condition: good (used), functionality: fully functional, machine/vehicle number: RQC777, mileage: 57,084 km, power: 103 kW (140.04 HP), first registration: 05/2024, fuel type: diesel, empty load weight: 2,506 kg, maximum load weight: 994 kg, overall weight: 3,500 kg, next inspection (TÜV): 03/2028, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, total length: 6,680 mm, total width: 2,190 mm, total height: 3,075 mm, loading space length: 4,150 mm, loading space width: 2,100 mm, loading space height: 2,100 mm, Year of construction: 2024, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, air conditioning, airbag, car registration, central locking, cruise control, electric window regulation, electronic stability program (ESP), full service history, onboard computer, power assisted steering, power mirror, soot filter, spoiler, start-stop system, Box body Tail lift Pgsdjy Hgzuspfx Ahyjk Spare wheel Spare wheel with steel rim Air conditioning Exterior mirror (passenger side) electrically adjustable Driver armrest Stop & Start Cruise control Speed limiter Cruise control Speed limiter

Condition: excellent (used), lifting height: 15,800 mm, Year of construction: 2016, operating hours: 500 h, General information Field of application: Construction Weights Empty weight: 2.800 kg Functional Lifting capacity: 3.150 kg CE mark: yes Condition Technical condition: very good Visual appearance: very good Psdsym T Slspfx Ahyjgk Other information Delivery terms: EXW Transport dimensions (LxWxH): 3,15x0,75x2 Production country: NL Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Hoeflon C6 * 2016 * Diesel and 230V drive * 500 working hours * Fly Jib * Hoist * Hydraulically extendable outriggers * Articulating outriggers * Non-marking tracks * Work light * Working height 15.8 meters * 13.7 meters horizontal reach * Infinite slewing rotation * 3150 kg lifting capacity * 2800 kg net weight

Condition: used, Year of construction: 2015, operating hours: 980 h, load capacity: 200 kg, Year of manufacture: 2015 Mast: articulated arm Pjdpfx Ahexiwhheyjgk

Condition: used, Year of construction: 2015, operating hours: 890 h, Year of manufacture: 2015 Pgsdsx Hgk Nepfx Ahyek Mast: articulated arm

Condition: excellent (used), Year of construction: 2008, Arburg OK-C S350-60 / Vertical Injection Moulding Machine with Sliding Table / Very Good Technical Condition Year of manufacture: 2008 Injection Unit: Screw diameter: 18 mm Shot weight: 18 g Injection pressure: 2500 bar Dosage volume: 20 ccm Clamping Unit: Clamping force: 35 t Tie bar distance: 0x0 mm Platen size: 295x395 mm Ejector: hydraulic Clamping unit: hydraulic Control System: SELOGICA - Touchscreen Additional Equipment: Vertical injection moulding machine with sliding table 3 stations on the sliding table Air valve x 4 Hydraulic core pull x 1 Pgedpfxsy Dp Ras Ahyek Hot runner control Hardened - bimetallic injection unit Parallel movements Infrared safety curtains Screw diameter can be changed Dimensions: Weight: 2500 kg Length/Width/Height: 2.55x1.85x3.52 m All machines offered are started and tested by our service technicians prior to sale. It is possible to obtain a video of the selected machine's technical tests or to participate in live technical tests at our facility in Łódź. Price: On request