Used Hinomoto C 174 for sale (54,853)

Condition: excellent (used), Year of construction: 2012, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: 21534, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 2,000 kg, table width: 700 mm, table length: 1,070 mm, overall weight: 12,500 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 5,000 h, spindle motor power: 15,000 W, number of slots in tool magazine: 38, Equipment: chip conveyor, documentation/manual, In very good condition, used for light milling operations. High-pressure coolant flush through the center of the tool, 80 bar. HSK63A tool holder. Blum tool breakage detection system. iTNC530 control system. Includes two vices and a pneumatic clamping device ITS100/P WT. Direct sale to end-users only. Predpfx Ahszw Rl Ajcja

Condition: used, Year of construction: 2023, operating hours: 183 h, load capacity: 1,400 kg, lifting height: 2,930 mm, fuel type: electric, gearing type: automatic, overall weight: 1,100 kg, empty load weight: 853 kg, color: orange, mileage: 183 km, first registration: 08/2023, suspension: other, number of seats: 1, driver cabin: other, emission class: none, fuel: electricity, Purchase or trade-in of: - Transporters - Forklifts - Commercial vehicles - Special vehicles - Fleets Very large selection of Iveco Daily, Volkswagen Caddy and Volkswagen T5 from Deutsche Post. Other: - Various loading options - Registration service - Delivery possible within Germany for an additional charge A viewing is also possible without registration: Mon. &#8211, Fri.: 8:00 a.m. to 5:00 p.m. Podpfx Aeza Ih Ushcora Sat.: 9:00 a.m. to 2:00 p.m. Address: Hauptstr. 90 76865 Rohrbach (Pfalz ) Tel.: E-mail: You can find more information at We speak German / English / Russian / Italian / French / Spain More Information Only sold to traders (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: used, Year of construction: 2023, operating hours: 151 h, load capacity: 1,400 kg, lifting height: 2,930 mm, fuel type: electric, gearing type: automatic, overall weight: 1,100 kg, empty load weight: 853 kg, color: orange, mileage: 151 km, first registration: 08/2023, suspension: other, number of seats: 1, driver cabin: other, emission class: none, fuel: electricity, Purchase or trade-in of: - Transporters - Forklifts - Commercial vehicles - Special vehicles - Fleets Very large selection of Iveco Daily, Volkswagen Caddy and Volkswagen T5 from Deutsche Post. Other: - Various loading options - Registration service - Delivery possible within Germany for an additional charge A viewing is also possible without registration: Mon. &#8211, Fri.: 8:00 a.m. to 5:00 p.m. Prsdjza Ih Ijpfx Ahcsa Sat.: 9:00 a.m. to 2:00 p.m. Address: Hauptstr. 90 76865 Rohrbach (Pfalz ) Tel.: E-mail: You can find more information at We speak German / English / Russian / Italian / French / Spain More Information Only sold to traders (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: used, Year of construction: 2017, operating hours: 1,158 h, load capacity: 1,400 kg, lifting height: 2,930 mm, fuel type: electric, gearing type: automatic, overall weight: 1,100 kg, empty load weight: 853 kg, color: orange, mileage: 1,158 km, first registration: 04/2017, suspension: other, number of seats: 1, driver cabin: other, emission class: none, fuel: electricity, Still EXV 14 C – a reliable electric high-lift pallet truck with an automatic transmission. Are you looking for a reliable and practical high-lift pallet truck that is ideally suited for daily use in a warehouse? The Still EXV 14 C combines a compact design, comfortable operation, and the proven quality of STILL – a compelling solution for efficient material handling in confined spaces. Pedpfezw Rizox Ahcjra The vehicle was first registered in April 2017 and currently has 1,158 operating hours. This makes the EXV 14 C an interesting combination of proven service life and manageable operating hours. The automatic transmission enables comfortable and intuitive operation, allowing work processes to be carried out quickly and efficiently. Visually, the high-lift pallet truck presents itself in the typical orange STILL color and immediately conveys a professional impression. In daily warehouse operations, reliable technology, ease of use, and efficient processes are essential – and this is exactly where the STILL EXV 14 C demonstrates its strengths. Whether for internal material transport, storage, or daily work in the warehouse: this STILL EXV 14 C is an interesting opportunity for companies that want to make their logistics efficient and economical. Take advantage of this opportunity now and learn more about the STILL EXV 14 C – a reliable assistant for efficient warehouse processes. Sales only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Errors and prior sales excepted.

Condition: used, mileage: 87,000 km, power: 75 kW (101.97 HP), first registration: 02/2020, fuel type: diesel, overall weight: 2,635 kg, next inspection (TÜV): 04/2028, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 4,956 mm, total width: 1,920 mm, total height: 1,881 mm, loading space length: 2,512 mm, loading space height: 1,290 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Beautiful and well-maintained Opel Vivaro L2H1 long wheelbase panel van, 75 kW, with Würth workshop fitting and optimal equipment for trades and businesses. Vehicle from first owner. Würth workshop fitting / shelving system in the cargo area (details below). 2-zone automatic climate control with pollen filter Alarm system 3 seats (double passenger seat) Driving Assistance Package 1, driving assistance systems: - Cruise control - Rear view camera - PDC Park Distance Control / parking assistance system front and rear, visual and acoustic display - Blind Spot Information System (BLIS) - Hill start assist - Driver fatigue detection - Automatic headlight control - Automatic windshield wipers - Brake assist - ABS, ASR, ESP On-board computer Audio Pro with color touchscreen - Media: Radio, Bluetooth music streaming, USB - Mirror Link, Android Auto, Apple CarPlay - Hands-free system for mobile phone with Bluetooth - Front airbags for driver and passenger Power windows Electrically adjustable, heated, and folding exterior mirrors Central locking with remote control Fog lights Spare wheel and jack Vehicle has a speed limiter of 130 km/h. Rear double doors without glazing, opening angle 180 degrees Sliding door in the cargo area, right side Prsdpfx Ahezw Nx Uecja Body style: L2H1, long wheelbase panel van Wheelbase 3275 mm Floor covering in the cab: plastic Steering wheel adjustable Driver's seat with fold-out armrest, adjustable in several ways: - Seat height, backrest, lumbar support 6-speed manual transmission Heat-insulating glazing Cargo area fitting: Würth workshop fitting (similar to Aluca, Bott, Sortimo). Left side with shelving system including shelf compartments, storage compartments, and 3 drawers. Right side with shelving system including storage compartments and a storage compartment. Cargo area partition, robust wooden floor. Special fastening rails and eyelets are available for securing the load. LED interior lighting. Walls partially clad with hard fiberboard. Mounted tires: Winter tires 215/60 R 17 on steel rims with approximately 8 mm tread depth at the front and approximately 9 mm at the rear. Serviced according to maintenance schedule, history: 02.2022 / 17,890 km Inspection + oil change 04.2024 / 34,550 km Insp. + oil change 04.2026 / 83,362 km Insp. + oil change Despite careful processing, input and data transmission errors may occur in the vehicle description, including images. Errors and prior sale reserved. The vehicle can be inspected by DEKRA or TÜV if desired.

Condition: used, mileage: 115,000 km, power: 75 kW (101.97 HP), first registration: 02/2020, fuel type: diesel, overall weight: 2,635 kg, next inspection (TÜV): 02/2028, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 4,956 mm, total width: 1,920 mm, total height: 1,881 mm, loading space length: 2,512 mm, loading space height: 1,290 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Beautiful and well-maintained Opel Vivaro L2H1 long wheelbase panel van, 75 kW, with Würth workshop fittings and optimal equipment for trades and businesses. Vehicle is from first owner. 2-zone automatic climate control with pollen filter Alarm system 3 seats (double passenger seat, multifunctional) Driver assistance systems: - Cruise control - Rear view camera - PDC Park Distance Control / parking assist system front and rear, optical and acoustic display - Blind Spot Information System (BLIS) - Hill start assist - Driver fatigue detection - Automatic headlight control - Automatic windshield wipers - Brake assist - ABS, ASR, ESP On-board computer Audio Pro with color touchscreen - Media: radio, Bluetooth music streaming, USB - Mirror Link, Android Auto, Apple CarPlay - Hands-free system for mobile phone with Bluetooth Electric windows Electrically adjustable, heated, and folding exterior mirrors Central locking with remote control Fog lights Front airbags for driver and passenger Spare wheel and jack Psdpfx Aezw Ny Eehcjra Vehicle has a speed limiter of 130 km/h Rear double doors without glazing, opening angle 180 degrees Sliding door in the cargo area, right side Body: L2H1, long wheelbase panel van Wheelbase 3275 mm Floor covering in the cab: plastic Steering wheel adjustable Driver's seat with fold-out armrest, adjustable in several ways: - Seat height, backrest, lumbar support 6-speed manual transmission Heat-insulating glazing Cargo area fittings: Würth workshop fittings (similar to Aluca, Bott, Sortimo). Left side with shelving unit including shelf compartments, storage compartments, 3 drawers. Right side with shelving unit including storage compartments. Cargo area partition without window. Robust wooden floor. Special fastening rails (in the floor, on the ceiling) and eyelets are available for securing the load. 2 tensioning rods are available. Additional LED interior lighting. Walls partially lined with hard fiberboard. Mounted tires: Continental winter tires 215/60 R 17 on steel rims with approximately 7 mm tread depth in the front and approximately 8 mm in the rear. Service booklet maintained, history: 02.2022 / 23,052 km Inspection + oil change 02.2023 / 45,580 km Inspection + oil change, fuel filter - air filter - interior/carbon filter 12.2023 / 68,329 km Oil change 04.2026 / 115,217 km Inspection + oil change, fuel filter - air filter - interior/carbon filter - brake fluid, drive belt - AT clutch renewed Despite careful processing, input and data transmission errors may occur in the vehicle description including images. Errors and prior sale reserved. The vehicle can be inspected by DEKRA or TÜV if desired.

Condition: used, mileage: 515,483 km, power: 382 kW (519.37 HP), first registration: 01/2017, tire size: 315/80 R22.5, axle configuration: 4x2, brakes: retarder, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, Year of construction: 2017, Equipment: ABS, central locking, cruise control, electric window regulation, parking heater, power mirror, retarder, = Additional Options and Accessories = - Speed limiter - Hydraulic tipping kit Prsdpszw Itdjfx Ahcoa - Aluminum fuel tank - Engine brake - Power take-off - Stability control - Sun visor - Alternating current - Tool box = Additional Information = Tire size: 315/80 R22.5 Brakes: Disc brakes Front axle: Aluminum rims; Steered; Tire tread depth left: 6 mm; Tire tread depth right: 5 mm; Suspension: Leaf spring suspension Rear axle: Dual tires; Tire tread depth left inside: 5 mm; Tire tread depth left outside: 3 mm; Tire tread depth right inside: 5 mm; Tire tread depth right outside: 4 mm Unladen weight: 7,517 kg Payload: 11,483 kg GVW: 19,000 kg Damage: none

Condition: excellent (used), mileage: 497,850 km, power: 345 kW (469.07 HP), first registration: 08/2018, fuel type: diesel, tire size: 385/65 R22.5, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 13,000 kg, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, parking heater, = Additional Options and Accessories = - Aluminum fuel tank - Climate control - Sleeper cab - Radio/CD player - Side mirrors with electric adjustment - Sun visor - Digital speedometer - Power take-off (PTO) = Additional Information = General Information Cab: single Technical Information Number of cylinders: 6 Engine displacement: 10,837 cc Unladen weight: 7,350 kg Axle Configuration Brakes: Disc brakes Front axle: Tire size: 385/65 R22.5; Max. axle load: 8000 kg; Tire tread depth left: 30%; Tire tread depth right: 30%; Suspension: Leaf spring suspension Rear axle: Tire size: 315/80 R22.5; Max. axle load: 13000 kg; Tire tread depth left: 40%; Tire tread depth right: 40%; Suspension: Air suspension Prodpfx Aezw Irashcoa Condition Technical condition: very good Optical condition: very good Damage: none

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 173340, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, plate length: 715 mm, plate height: 715 mm, total length: 5,360 mm, total width: 1,800 mm, total height: 2,200 mm, overall weight: 6,900 kg, Equipment: documentation/manual, ARBURG ALLROUNDER 520 C 2000-675, hydraulic injection molding machine for plastics, year of manufacture 1998. The machine has a clamping force of 2,000 kN (200 tons) and an injection unit with a 50 mm diameter screw. Prsdpfx Ahezw Hnyecoa Technical data: Manufacturer: ARBURG Model: ALLROUNDER 520 C 2000-675 Year of manufacture: 1998 Clamping force: 2,000 kN / 200 tons Injection unit: 675 Screw diameter: 50 mm Distance between columns: 520 × 520 mm Platen size: approximately 715 × 715 mm Opening stroke: approximately 650 mm Control: SELOGICA Condition: The machine was dismantled in perfect working order and is sold in its current condition. Operating hours are not available. The machine is available for viewing/inspection by appointment. Sale includes the injection molding machine only. The Cartesian robot and other components of the cell can be purchased separately.

Condition: good (used), Year of construction: 1989, TITAN SC16.000 | 16-Metre Heavy-Duty CNC Vertical Turning Lathe One of the largest vertical turning lathes available on the market — the TITAN SC16.000 is built for the most extreme heavy machining tasks in energy, mining, shipbuilding, and defense industries. EXCEPTIONAL CAPACITY: • Faceplate Diameter: 12,000 mm • Max. Turning Diameter: 16,000 mm • Max. Workpiece Height: 6,000 mm • Max. Workpiece Weight: 400 TONNES Psdsf Utqmjpfx Ahcsra CNC & FEATURES: • Full CNC control system • C-Axis available — for milling and complex contouring • Engineered for continuous heavy-duty production IDEAL APPLICATIONS: • Wind turbine bases and flanges • Large ship propellers and stern frames • Mining drum bodies • Hydro turbine runners • Nuclear & power generation components • Large pressure vessel heads WHY THIS MACHINE? ✔ Extremely rare — machines of this size are very difficult to find ✔ Fully functional — available for inspection under power ✔ CNC control for modern precision requirements ✔ Export possible — experienced in international logistics for oversized equipment Manufacturer: TITAN | Location: REM Bacau, Romania Contact us immediately — this machine will not last long. Full inspection welcomed.

Condition: used, Year of construction: 2004, saw blade diameter 360 / 425 / 460 mm cutting diameter 10 - 140 mm cutting speed 25 - 160 m/min total power requirement 35 kW weight of the machine ca. 4,2 t Predpfx Ajv Nq Rtjhcoa dimensions of the machine ca. 2,8 x 1,8 x 2,2 m

Condition: used, Year of construction: 2011, Used Equipment Year of Manufacture: 2011 Condition: Currently installed Equipment and Technical Data: -Filter housing base ring NFHSU 9/9 with discharge chute for press - Discharge: 1.1 kW - Storage volume in the base ring approx.: 3.25 m³ - Dimensions L x W x H (incl. base ring) 2440 x 2440 x 900 mm - Ground clearance: 350 mm - Conveyor screw for briquetting press 0.75 kW - Extension and expansion rings are optional; max. storage volume approx. 12 m³ - Extension and injection ring NFHSU for 9/9 and 10/10 Jet, L x W x H: 2480 x 2480 x 500 mm - Expansion ring for NFHSU 9/9, 2480x2480x700 mm, with inspection door and type-tested explosion flap - Filter for filter housing NFHSU 9/9/20, filter area 116 m²: The Nestro filter system NFHSU is a solid filter construction made of 4 mm galvanized steel sheet and is designed for outdoor installation and weather resistance. This filter system is particularly robust and designed for underpressure operation up to -3,500 Pa. The filter system is equipped with upper and lower inspection doors 600 x 600 mm, with automatic filter regeneration, dry extinguishing system, differential pressure switch / volumetric flow monitoring and the necessary explosion protection. Note: Filter is equipped with high-quality filter material, BIA category M, antistatic, residual dust content < 0.1 mg/m³ and suitable for return air operation. Further technical data: - Filter tube length: 2,000 mm - Filter tube diameter: 230 mm Predpfxozvz Tbo Ahcsa - Number of filter tubes: 81 - Filter area: 116.0 m² - Filter regeneration: automatic/motorized - Number of vibrating motors: 4 pcs - Fan shroud for NFHSU 9/9 including inspection door - Fan US-FHN (clean gas) 22 kW 16,400 m³/h - 3,200 Pa: A Nestro high-performance fan with above-average efficiency and high energy saving potential when using a frequency inverter (optional). The robust welded construction is primed and painted in RAL 5015. The fan is delivered as standard with an inlet cone and backflow damper. Technical data at a glance: - Volumetric flow: 16,400 m³/h - Corresponding underpressure: 3,200 Pa - Electric motor: 22 kW / 400 Volt / 50 Hz - Speed: 3,000 rpm - Design: B5 - Pressure nozzle: without - Application area: Nestro underpressure filter and others - Injection nozzle d= 400 mm with flange ring - Injection nozzle d= 350 mm with flange ring - Backflow damper d= 350 mm with flange edge - Backflow damper d= 400 mm with flange edge - Briquetting press C150; 30 - 50 kg/h, hydraulic unit 5.5: Technical data: - Power consumption (hydraulics): 5.5 kW - Briquette diameter: 50 mm - Weight: 650 kg - Briquetting performance with a bulk density of approx. 250 kg/m³, material-dependent: 30 - 50 kg/h - Ground clearance with base frame (art. no. 710300): 350 mm - Briquetting press, dust-proof - Briquetting press complete with hydraulic solenoid valve control for automatic operation, oil tank with 100 l oil, in welded construction, including main cylinder, stuffing cylinder, gripper cylinder, pressing jaw, electrical control panel with fully automatic control and 5 m cable The press is standardly equipped with: Monitoring switch for oil temperature, hardened press bushing, connection part for briquette line and automatic briquette length adjustment

Condition: excellent (used), Year of construction: 2006, ARBURG 320 C 400-170 injection molding machine Year of manufacture: 2006 Clamping unit Clamping force: 400 kN (40 tons) Distance between tie bars (H × V): 320 × 320 mm Injection unit Screw diameter: 30 mm Maximum injection volume: 85 cm³ Maximum injection shot weight (PS): 77 g Maximum injection pressure: 2000 bar Maximum screw speed: 400 rpm Nozzle stroke: 250 mm Nozzle clamping force: 40.6 kN Heating power: 9.4 kW Drive and power Pump drive power: 11 kW Total installed power: approx. 20.5 kW Dimensions and weight Machine length: approx. 3.4 m Machine width: approx. 1.4 m Machine height: approx. 2.0 m Machine weight: approx. 2,400 kg Prodpfx Ahezw A Ehjcja Additional information The machine is equipped with a new screw, which is covered by a warranty.

Condition: used, Year of construction: 2000, Technical details: turning diameter: 1600 mm turning length: 3000 mm centre height: 800 mm turning diameter over bed: 1600 mm turning diameter over bed slide: 1400 mm turning dia. over face-slide: 1200 mm max. workpiece weight between centers: 20 to speeds: 5,6 -800 1/min transmission ratio: 3 spindle bore: 112 mm turret (x-stations): 8 / VDI 60 travel -x axis: 850 mm travel -z axis: 3020 mm rapid power traverse in X-and Z direction: 6 / 10 m/min power maindrive: 46 kW weight of the machine ca.: 22 to. dimensions of the machine ca.: 7,2 x 4 (3,11) x 2,7 m tech-in lathe, flatbed, tailstock, 8-pos. BARUFFALDI turret with 4 live tools, power 9kW, 4-pos. BARUFFALDI square-headed turret horizontal, Prjdpfohutpvjx Ahcsa C-axis, 3-jaw hydr. chuck SMW Autoblock KNCS 800/165, dia. 800mm, quick adjustment, power cylinder with 2 pressure clamping system, chipconveyor, coolant device, accessories *

Condition: used, Year of construction: 1997, Technical details: spindle diameter: 180 mm x-travel: 6.000 mm y-travel: 2.900 mm total power requirement: 95 kW weight of the machine ca.: 130 mit Zubehör t z-travel: 1.250 Ram mm w-axis: 1000 Spindel mm ram stroke: 1250 mm dimension of the ram: 450 x 450 mm Prjdpfx Ajru Rfhohcsa bore spindle stroke: 1000 mm bore spindle turning speed range: 920 1/min powered rotary table: IOS 40 CNC 2 Achsen B u.V Rotary-table: 3000 x 3500 mm Rotary-table: CNC-IOS 40 NC mm stepless adjustable, relative to diameter: Index 4x 90° -360000 Winkel =0,001 Grad mm travel - cross: Längs 1230 mm table load of rotary table max.: 40 Tonnen clamping plate: 3 x 8000 x 2000 mm CNC Ram-Type Floor Boring and Milling machine, dismantled and stored The headstock sliding guides were recoated and scraped. *

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 107 h, load capacity: 200 kg, lifting height: 13,000 mm, construction height: 2,100 mm, fuel type: electric, drive type: Elektro, Articulating boom lift Technical condition: very good Front tyre type: solid rubber Front tyre size: 600x190 Rear tyre type: solid rubber Rear tyre size: 600x190 Battery voltage: 48V CE certificate, Pedjvky D Sopfx Ahcera

Year of construction: 2005, condition: excellent (used), KLIKLOK CERTIWRAP C-80 ID.NO. 2505 Kliklok HST Certiwrap C-80 sleeve machine for putting cardboard packaging around products. 3x different tools included & associated Nordson glue set year mod 2005. No. 1. 160 x 388 mm. No. 2. 160 x 407 mm No. 3. 422 x 162 mm dimensions 470 x 130 H 170 cm. Predjki Tlqjpfx Ahcja

Condition: ready for operation (used), Year of construction: 2015, controller manufacturer: KUKA, This KUKA KR270 R2700 C ultra MED robot arm was manufactured in 2015. Ideal for precise automation tasks, it offers robust performance and reliability. Contact us for more information. Additional equipment • Resolver Cable: 16m • Motor Cable: X7.x flexible, 15m; X30 flexible, 15m Prjdpfx Aszvv E Sohcja • Three-phase Servo Motor: TYP-K/1FK7103 • Reference Switch Assembly: 25m angled / Reference Switch Unit: Cable trailing 15.0m • Adjustment Equipment Set for Additional Axes • SmartPAD: 1.0 / SmartPAD Holder: Medweiß 610 / Extension Cable SmartPAD: 25m and 10m • Scope of delivery: Robot, control cabinet & cable. Machine Benefits Technical Machine Benefits • Production hours: less than 1000 machine hours • Positioning robot: kr c4 / special paint finish: mechanics and base / cooling: standard medwhite 610 / krc4 basic enclosure: eu medwhite / disconnector: 8 kva 380/400/440-400/230v, 25a • Mains supply: eu han6 transformer 8 kva mbc / enclosure paint: siemens white 610 /labeling set: de/en kr c4 • Ethernet interface: x67. 1-3 / reference switch interface: x42 / external power supply interface: x55 / csp standard: 2xusb3. 0 / rj45 - ksi • Controller: mcc-30s med / kss: 8. 3/ safe operation: 3. 2 / ethernet krl: 2. 2 / robot sensor interface: 3. 2 / remote service: 1. 1 / profinet controller/device: 3. 1 • Load: 270 kg / range: 2696 mm

Condition: as good as new (ex-display), Year of construction: 2025, Hydraulic CNC press, 100 tons (1,000 kN) pressing force Siemens SPS1200 series 10" Beijer display Stroke 400 mm Table size 790 mm x 600 mm Feed speed 110 mm Return speed 140 mm Sick light curtain Pedpfenp Ndhjx Ahcsra Remote maintenance module installed Rexroth hydraulics with cooler Modifications can be implemented upon request Upon request, the manufacturer can supply C-shaped frames for presses with a pressing force of 10 tons to 400 tons and variable dimensions.

Condition: good (used), lifting height: 22,000 mm, Year of construction: 2018, operating hours: 5,800 h, Field of application: Construction Prsdpfx Ahex I Rgqscja Empty weight: 4.700 kg Lifting capacity: 3.990 kg CE mark: yes Technical condition: good Visual appearance: good Maximum lifting capacity at end of jib: 250 kg Delivery terms: EXW Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Hoeflon C10 * 2018 * Diesel and 380 Volt drive * 5,800 operating hours * Fly jib * 4,000 kg winch * Non-marking tracks * Remote control * 22 meter hook height * 19.8 meter horizontal reach * Unlimited swing rotation * 3,990 kg lifting capacity * 4,700 kg own weight * Recently underwent major maintenance by Hoeflon * Includes maintenance history

Condition: reconditioned (used), functionality: fully functional, operating pressure: 160 bar, empty load weight: 94 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 698 C HOT WATER WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 160 bar and 650 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model: HDS 698 C Power supply voltage (V): 400 ~ 3 phase Discharge capacity (l/h): 650 Operating pressure (bar): 30 - 160 Max. Water heating temperature (C): 80-155 Connection power [kW]: 4.5 Dimensions (L x W x H mm): 940 x 600 x 740 Pressure hose length (m): 10 Weight (kg): 96 Prodpfjzwu Nfex Ahcoa EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in chemical tank allows for dispensing cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes.

Condition: like new (used), Year of construction: 2022, operating hours: 4,747 h, functionality: fully functional, machine/vehicle number: 329760, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, This machine can still be inspected while powered on at the factory. It has very few operating hours and is in new condition. The original new price was €180,000. Used CNC vertical machining center, Manufacturer: MAZAK Prjdpfx Ajzwu H Rehcea Model: VCN 530 C SmoothG Machine number: 329760 Operating hours: 4747 The tools, fixtures, and vise are not included in the scope of supply. You will find the order confirmation and the machine's specifications in the attachment.

Condition: new, Year of construction: 2026, power: 15 kW (20.39 HP), pressing force: 150 t, stroke length: 125 mm, table width: 660 mm, table length: 920 mm, throat depth: 320 mm, ram plate width: 290 mm, ram plate length: 600 mm, total length: 1,600 mm, total width: 2,280 mm, total height: 2,750 mm, overall weight: 7,100 kg, Equipment: CE marking, documentation/manual, safety light barrier, CRONOSSTECH CECP 150 | 150 Ton C-Type Eccentric Press | Heavy Industry Sheet Metal Cutting and Forming Machine From CRONOSSTECH, Turkey's reliable press machine manufacturer: a 100% CE certified 150 Ton C-Type Eccentric Press for cutting, punching, and heavy cold forming operations on thick sheets. With its reinforced, rigid steel frame, it offers industrial solutions with minimal deflection, maximum work safety, and flawless stroke accuracy in heavy-duty industrial production lines. Key Advantages for Your Industrial Production: High Durability and Repeatability: Perfect part quality and long die life thanks to its steel construction that remains stable during heavy-tonnage strokes. Maximum Work Safety: Operator safety-focused design with beam barrier, double-coil safety valve, and mechanical fuse. Low Maintenance Costs: Continuous and trouble-free operation thanks to the central, fully automatic grease lubrication system. Prsdpfjzwt Nwsx Ahcoa Smart Control (Standard): Fast recipe management and commissioning with advanced PLC infrastructure and the Touchscreen LCD display offered as standard. Application Areas: Cutting, punching, and blanking operations on thick sheets Cold shearing and heavy metal forming applications Automotive, white goods, and heavy industry production lines ✅ STANDARD EQUIPMENT Steel construction, rigid frame structure Guide system with bearings on 4 surfaces Spheroidal cast iron connecting rod and bearing housings 4140 heat-treated steel crankshaft and transmission shafts Pneumatic clutch and brake combination Touchscreen LCD display and PLC control system Manually adjustable stroke and mechanical fuse Dual hand/foot control system Emergency reverse motor movement Full compliance with CE standards and occupational safety regulations ✅ OPTIONAL FEATURES Anti-vibration industrial pads Hydraulic fuse system Spare table Roll sheet uncoiler, driver, and straightener integration 8-bearing slide system Project-specific 1 set of die design and production ✅ TECHNICAL SPECIFICATIONS (150 TON) Capacity: 150 Ton | Motor Power: 15 kW (1450 rpm) | Stroke Rate: 42 strokes/min Table Size: 660×920 mm | Ram Size: 600×290 mm Throat Depth: 320 mm | Stroke Adjustment: 10–125 mm Ram Adjustment: 120 mm | Table Hole Diameter: Ø220 mm Table-Ram Distance: 500 mm | Slide-Table Distance: 540 mm Distance Between Columns: 500 mm | Floor-to-Table Height: 805 mm Die Clamping Slot Diameter: Ø55 mm Front / Side Anchorage Dimensions: 840 mm / 1300 mm External Dimensions (W x D x H): 1600 x 2280 x 2750 mm Approximate Weight: 7100 kg (Note: Please inform us if you have any technical modification requests specific to your production line.) ✅ MANUFACTURER'S GUARANTEE This machine is manufactured in Turkey with CRONOSSTECH engineering. Global exports, commissioning, and all post-sales technical support processes are directly managed by our expert team.

Condition: used, Year of construction: 2006, * Work area: 2,650 x 1,240 mm * X-Y travel: 2,995 x 1,385 mm * Z-axis travel: 200 mm * Clearance height: 180 mm C-axis deactivated - 3-axis machine The structure of the base body is a monolithic construction made of thick-walled steel. It is reinforced throughout the machine bed by welded triangular plates, making it extremely stable. The triangular shape used for the supporting parts, with a large base, is the key to long-lasting precision and stability. The machine's layout allows the user an optimal workflow despite minimal space requirements. The base body, constructed in this way, provides the machining unit with a balanced and secure base with particularly good load distribution. The mobile unit carrier is made from a solid monoblock. It is positioned in the X-direction on prismatically ground guides via ball screw slides. The machining unit is, in turn, attached to the mobile unit carrier on prismatic, ground guides and the ball screw slide. Description of units and accessories (base) Drilling unit: Drilling head with 12 + 6 spindles * 7 individually selectable vertical spindles in X * 5 individually selectable vertical spindles in Y * 4 horizontal spindles in X (2+2) * 2 horizontal spindles in Y (1+1) * Speed: 4,000 1/min * Power: 2.2 kW * Grid: 32 mm * Drill chuck: M 10 with Morse taper No. 11 Nut saw unit in "X": * Integrated in the drilling head * Nut saw blade with a diameter of up to max. 120 mm Main milling unit (Position 2): * Tool holder HSK 63F * Speed 1,500 - 24,000 1/min, stepless via inverter * Motor power 4.4 kW (6 hp) from 12,000 1/min (S1) * Motor power 6.6 kW (9 hp) from 12,000 1/min (S6) * Right/left rotation * Ceramic bearings * Scope of supply: 4 pcs. tool holder (right) without collet Tool changer R8L Automatic tool changing device for 8 tools. Mounted on the rear unit carrier for quick access to the tools. * Number of tool positions: 8 * Max. tool diameter: 120 mm * Max. weight per tool: 4.5 kg * Max. total weight of all tools: 22 kg * Holder for 1 angular gear Prodpfx Ahox Twccecea * Mounted and moving in X Horizontal milling unit (Position 1) Horizontal unit with two opposite outlets for milling and grooving. * Speed 9,000 - 18,000 1/min, stepless via inverter * 1 outlet for collet 3-20 mm (ER 32) * 1 outlet for saw/collet 3-12 mm (ER20) (For saw D=120 mm / bore 50 mm) * Motor power 3 kW (4 hp) * Max. tool diameter, front milling: 20 mm * Max. tool length, front milling: 110 mm * Max. tool diameter, rear milling: 12 mm * Max. tool length, rear milling: 80 mm * Max. saw blade diameter: 100 mm * Bore in saw blade (ER 32): 50 mm * Arbor diameter, saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum "freedom of movement". The vacuum quick-clamping system offers maximum flexibility with precise positioning and optimal workpiece clamping. * 6 supports 1000 mm, stepless pneumatically adjustable in X * 12 vacuum suction cups, round D = 110 mm, steplessly adjustable in Y (2 pcs. per support) * 2 stops in X (1 x left / 1 x right) * 1 stop in Y per support (total 6 pcs.) * The retractable reference stops are CNC-controlled * Pendulum machining standard (2 working areas) --- other clamping systems are available as optional extras --- Axis movement The drive system in X, Y and Z is via ground ball screws.

Condition: used, machine/vehicle number: 008338, X axis working area: 4500 mm Y axis working area: 1935 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 5 axes Psdpfxex A Tkxj Ahcora Total number of drilling spindles: 41 Total number of tool changer positions: 37