Used Hermle Uwf 802 M for sale (147)

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (min.): 16,000 rpm, The machine is in good technical condition, featuring a Heidenhain TNC 426 control system, a magazine for 20 HSK 63 tools, including a probe + 4th axis. Isdpfx Ahoxfg Ayo Njht

Condition: used, Hermle H 2 milling machine with accessories Iodjugv Nwjpfx Ah Njht

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 12263, travel distance X-axis: 875 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 7,000 rpm, quill stroke: 75 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X / Y / Z: 875 / 500 / 500 mm Quill stroke: 75 mm Table NC table: 500 mm C-axis: 360° B-axis: ±30° Rotational speed: 11 rpm Resolution: 0.001° Component accuracy: ±15'' Table load capacity: 300 kg Drive Drive power (100% / 40% duty cycle): 7.5 / 11 kW Torque (100% / 40% duty cycle): 266 / 390 Nm Speed range: 20 – 7,000 rpm Vertical milling head Quill stroke (vertical and transverse): 75 mm Swivel range: 0 – 90° Feed drives Feed forces X, Y and Z: 8,000 N Rapid traverse: 15 m/min Feed screw diameter and pitch: 32 / 10 mm Measuring system Direct path measuring system, resolution: 0.0001 mm Position tolerance Tp in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm Tool system Spindle taper: SK 40 (similar to DIN 2079, for tool holders according to DIN 69871 A) Number of tool stations: 16 Tool diameter: 80 mm Tool diameter with free adjacent stations: 100 mm Tool length: 250 mm Tool weight: 6 kg MACHINE DETAILS Control unit: Heidenhain TNC 410 Electrical data Operating voltage: 400 V / 50 Hz Total connected load: 14 kVA Ihedpfjw Rc Absx Ah Nst Dimensions & Weight Dimensions (L x W x H): 3.0 x 2.3 x 2.2 m Weight: 4,800 kg

Condition: good (used), Year of construction: 2004, Manufacturer: HERMLE Type: U 1130 Iodjv S Alnopfx Ah Neht Year of manufacture: 2004 Control: Heidenhain iTNC 530 Machine weight: approx. 8500 kg Tool holder: SK 40 X travel: 1300 mm Y travel: 720 mm Z travel: 630 mm Speed range: 18000 rpm Max. table load: 700 kg Operating hours: 50,775 Spindle hours: 21,654 Space required: approx. 3600 x 4500 x 2800 mm Table size: 800 x 1000 Number of tools in magazine: 28 positions Internal coolant supply: 80 bar 3D measuring probe: TS 640 5 axes simultaneous

Condition: ready for operation (used), Year of construction: 2003, Make: HERMLE Type of machine: C 800 U Year of manufacture: 2003 Isdpfstmtxmjx Ah Noht Control system: Siemens 840D Machine's weight: 9.000,- Tool holder: SK40 x-travel: 800 mm y-travel: 600 mm z-travel: 500 mm Speed range: 16.000 min-1 Number of tools in the magazine: 80 Pl.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK63 - Spindle power : 17.5 [kW] - Spindle speeds : 18.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 915 / 500 / 500 [mm] - Rapid traverses rates (X/Y/Z) : 30 / 30 / 20 [m/min] TOOL CHANGER - Tool magazine capacity : 28 TABLE - Table dimensions : Ø 630 [mm] - Maximum weight upon table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3620 x 3160 [mm] - Machine height : 3000 [mm] - Machine weight : 7300 [kg] MACHINE HOURS - Number of working hours : 50223 [h] Ihsdoup Hwxepfx Ah Net EQUIPMENT - CNC : Heidenhain iTNC 530 - Coolant tank - Chips conveyor - Oil mist extractor : ELBARON - Cooling unit : HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probe : Renishaw - Tool breakage detection : BLUM

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK63 - Spindle power : 17.5 [kW] - Spindle speeds : 18.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 915 / 500 / 500 [mm] - Rapid traverses rates (X/Y/Z) : 30 / 30 / 20 [m/min] TOOL CHANGER - Tool magazine capacity : 28 TABLE - Table dimensions : Ø 630 [mm] - Maximum weight upon table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3620 x 3160 [mm] - Machine height : 3000 [mm] - Machine weight : 7300 [kg] MACHINE HOURS - Number of working hours : 48894 [h] EQUIPMENT - CNC : Heidenhain iTNC 530 - Coolant tank Iedpfx Ahjup Hw Ej Njht - Chips conveyor - Oil mist extractor : ELBARON - Cooling unit : HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probe : Renishaw - Tool breakage detection : BLUM

Condition: excellent (used), Year of construction: 2001, x-travel 600 mm y-travel 450 mm z-travel 450 mm spindle turning speed range 16000 U/min control HEIDENHAIN TNC 430 Number of axles 5 simultan table rotating 360 ° taper ISO SK-40 table diameter 280 mm rapid traverse 30wer m/min tool change unit 30 -fach weight of the machine ca. 6,5 t dimensions of the machine ca. 3100 x 2400 x 2500 m his HERMLE C600U is in very good condition and available immediately. Hours on: - Machine ON: 65'656h - Spindle ON: 28'281h Iodpfx Ajvwgm Tsh Neht Equipment & Description: - Coolant outside with 6bar 3 nozzles - Manual canopy - Electr. heat compensation - Electr. handwheel iTNC - Measuring probe HEIDENHAIN - Blum tool breakage control - Documentation / Operating instructions - NEW air filter system CABARON type: COB-H10-2 (year of construction 2012 never in use) Option: - Div. tool holders ISO SK-40, 109 pcs.

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 11721, Description: Control: Heidenhain TNC 430 Working range: X-axis: 800 mm Ijdpfx Ahstq H Sqe Noht Y-axis: 600 mm Z-axis: 500 mm Tool holder: HSK40 Spindle speed Max 8,000 rpm Tool magazine: 30 places Max. Tool diameter: Ø 80 mm; with adjacent free spaces Ø125 mm. Max. Tool length: 300 mm. Max. Table load: 1,500 kg Dimensions and weight: Machine weight: approx. 7,200 kg Machine dimensions approx. : Width: 3.7 m; Depth: 4.3 m; Height: 3.0 m.

Condition: excellent (used), Year of construction: 2016, operating hours: 7,460 h, functionality: fully functional, machine/vehicle number: 24627, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 330 mm, workpiece weight (max.): 150 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 55, swivel angle A-axis (min.): 135 °, swivel angle A-axis (max.): 135 °, swivel angle C-axis (max.): 360 °, Equipment: chip conveyor, 5-axis machining center with workpiece storage AUTOMATION Eco-Compact 20 workpiece storage and handling system: 20 workpiece storage spaces / Handling system for automatic loading / Integrated, pneumatic interface for Quick-Point clamping towers Swivel device: Easy swiveling of the system to a fixed point Quick-Point automation clamping tower 96: Height: 80 mm / Plate: Ø 176 mm / Body: Ø 246 mm Quick-Point round plate 96: Without holes / Ø 246 x 27 mm / Bolt spacing: 96 mm Macro-Grip automation clamp 77: Length: 170 mm / Clamping range: 0-160 mm TECHNICAL DETAILS X-axis travel: 450 mm Y-axis travel: 600 mm Z-axis travel: 330 mm Control type: Heidenhain TNC 640 Functions: Dynamic Efficiency (ACC, AFC, trochoidal milling), Dynamic Precision (CTC, AVD), HIMS (Hermle Information and Monitoring Software) Workpiece capacity Maximum jaw width: 470 mm Maximum workpiece diameter: Ø 450 mm Maximum workpiece height: 370 mm Interference circle (A-axis) in 0° position: Ø 610 mm Spindle Speed: 18,000 rpm Tool holder: HSK-A63 Power/torque at 20% duty cycle: 31 kW / 35Nm Tool magazine Interface: SK 40 / HSK A63 Magazine locations: 55 Chip-to-chip time: approx. 4.5 s Maximum tool length: 250 mm Maximum tool diameter with corresponding adjacent location occupancy: Ø 125 mm Maximum tool diameter: Ø 80 mm Maximum tool weight: 8 kg Maximum magazine load: 220 kg Rapid traverse and acceleration Rapid traverse linear (dynamic) X-Y-Z: 30 (50) m/min Acceleration linear (dynamic) X-Y-Z: 8 (15) m/s² Feed force linear X-Y-Z: 4,500 N Table Swivel rotary table: Ø 320 mm Clamping surface: Ø 320 mm Swivel range: +/- 135° Drive type C-axis: Torque Speed of swivel axis A (single-sided drive): 25 rpm Speed of swivel axis A (tandem drive): 55 rpm Speed of rotary axis C: 80 rpm Maximum table load: 150 kg Star-shaped T-slots: 4 pieces / 14 H7 Positioning uncertainty Positioning uncertainty (X-Y-Z axis according to ISO 230-2): ≤ 0.006 mm Chip management Chip chute: Space-saving installation on the left or right Capacity of chip chute: 210 l Chip conveyor: Scraper belt conveyor Isdpsvtmhpofx Ah Noht MACHINE DETAILS Switch-on time: 21,883 h Control switch-on time: 23,157 h Program run: 10,584 h Spindle hours: 7,460 h Power consumption: 46 kVA Net weight: 9000 kg Coolant supply Internal coolant supply: 80 bar Additionally required options: Bed flushing paper belt filter or internal coolant supply 80 bar Internal coolant supply 80 bar includes: - Paper belt filter including police filter - Standard coolant device - Flushing air for scales and bed flushing - Production cabin Safety and additional functions Vario valve: available Blow-off device: blown air through the spindle center Chip flushing gun: available Emulsion mist extraction: including post-filter Manual cabin roof: available Polycarbonate safety window: available Electronic equipment Electrical heat compensation: Heidenhain Electrical manual control module: Heidenhain Measuring probe: Renishaw including preparation BLUM tool breakage/measurement A2: available

Condition: ready for operation (used), Year of construction: 2001, operating hours: 10,249 h, functionality: fully functional, machine/vehicle number: 15137, travel distance X-axis: 1,000 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 550 mm, table width: 800 mm, spindle speed (max.): 7,000 rpm, number of slots in tool magazine: 28, Well-maintained machine with a spindle from 2022 TECHNICAL DETAILS Longitudinal travel (X): 1,000 mm Transverse travel (Y, slide): 630 mm Vertical travel (Z, milling head): 550 mm Control: Heidenhain TNC 430 C-axis: Full-featured A-head: Manually swivelable to 0° and 90° Spindle Spindle speed (max.): 7,000 rpm Spindle type: Geared spindle with high torque in the lower speed range Special feature: Suitable for M30 synchronous thread cutting Spindle head swivel (manual): ±90° Milling spindle diameter in the front bearing horizontal/vertical: 80 / 55 mm Tool changer: 28-station Working area Milling spindle vertical - Distance from milling spindle to top edge of rotary table: 130 - 680 mm Milling spindle horizontal - Milling spindle to the rotary axis of the milling head, rotary table: 140 - 690 mm Milling spindle vertical/horizontal - Distance from the milling spindle axis to the rotary axis of the milling head: 120/110 mm NC rotary table 4th axis: Ø 800 mm Iedpjwmm D Njfx Ah Nsht Condition & Maintenance Spindle: renewed 2022 Maintenance: carried out regularly Geometry: laser measured 2022 Tool changer: lifting unit recently replaced Maintenance reports: available MACHINE DETAILS Control on: 35,165 h Machine on: 21,574 h Program run: 11,750 h Spindle on: 10,249 h Axes in motion: 10,285 h Weight: 6,500 kg Rated power (apparent power): 17 kVA Input current: three-phase EQUIPMENT - Documentation and manual - Chip conveyor - A-head with manual tilt function to 0° and 90° - Tool changer with new lifting unit - Spindle with high performance in the lower speed range, suitable for M30 synchronous threads - Maintenance and geometry reports available

Condition: good (used), Hermle Centrifuge Z 200 A Small Centrifuge A compact centrifuge for doctors and clinical laboratories. The Z 200 A takes up to 12 x 15 ml tubes with conical and round bottom. Specifications . Volume: max. 12 x 15 ml / 6 x 50 ml. Speed: max. speed/RCF: 6000 rpm / 4185 xg min. Speed/RCF: 250 rpm / 7 xg Speed range: 250 - 6000 rpm Speed setting: knob-controlled in 250 rpm steps Speed display: preset and actual speed - digital Running time: max. time: 30 min. / continuous run min. time: 0.5 min. Preselection: 0.5 - 30 min. / "Contin. Time setting: by push-button 0.5 min. increments Time display: remaining time - digital Brake: fixed braking force with soft stop Ihedpfsm Albdex Ah Njt Features: microprocessor-controlled - Microprocessor-controlled - DC motor, covered - ABS plastic housing shock and chemical resistant Safety: - Lid locking system - automatic unbalance indicator with safety cut-off - manufactured according to IEC 1010, UVV VBG 7z Dimensions (cm / inch): Width: 28 / 11.0 height: 26 / 10,2 Depth: 37 / 14.6 Weight: 15 kg / 33.0 lbs Power consumption: 180 W Item condition: used, top condition You can find more centrifuges - new and used - in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2019, operating hours: 11,832 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 38, swivel angle A-axis (min.): -139 °, swivel angle A-axis (max.): 91 °, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS X-axis travel: 850 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Control type: Heidenhain TNC 640 Rapid traverse linear X-Y-Z: 35 - 35 - 35 m/min Linear acceleration X-Y-Z: 6 m/s² Linear feed force X-Y-Z: 7,000 N Max. jaw width: 625 mm Workpiece dimensions Max. diameter: Ø 650 mm Max. height: 500 mm Interference circle (A-axis) in 0° position: Ø 885 mm Spindle data Speed: 15,000 rpm Power/torque: 20% duty cycle, 20 kW / 173 Nm Tool holder: SK 40 Tool interface Type: SK 40 Magazine positions: 38 pieces Chip-to-chip time: approx. 6 s Tool length: max. 300 mm Tool diameter with adjacent position occupied: Ø 80 mm Tool diameter without adjacent position occupied: Ø 125 mm Tool weight: max. 8 kg Magazine load: max. 152 kg Swivel rotary table Clamping surface: Ø 650 x 540 mm Swivel range: +91° / -139° Drive type C-axis: worm Speed of swivel axis A: 25 rpm Speed of rotary axis C: 30 rpm Table load one-sided drive: 600 kg Accuracy according to ISO 230-2 Deviation (A in X-Y-Z axis): ≤ 0.006 mm Cooling system (IKZ) Standard tank capacity: 122 l Coolant tank capacity: max. 570 l at 40 bar Pressure: max. 40 bar Flow rate: 11/27 l/min Mains connection (IKZ): 400 V / 50/60 Hz Power consumption (IKZ): up to 20 kVA Filter: police filter, paper belt filter Operating pressure Hydraulic pressure: 120 bar Compressed air: 6 bar Lubrication system: minimum quantity grease lubrication MACHINE DETAILS Control switch-on time: 20,178 h Machine switch-on time: 19,094 h Spindle time: 11,832 h Weight: approx. 9.5 t Iedpfxjvw Sdqo Ah Noht Mains connection Voltage: 400 V / 50/60 Hz Power consumption: up to 30 kVA EQUIPMENT - BLUM measuring probe - BLUM tool laser measurement - Extendable chip drawer - Swivel rotary table - Chip flushing gun - Emulsion mist extraction - Scraper belt conveyor - Blow-off device - Blowing air through the center of the spindle - Manual cabin door - Manual cabin roof - Polycarbonate safety windows - Electrical heat compensation from Heidenhain. - Electrical manual control module from Heidenhain.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 14,430 h, functionality: fully functional, machine/vehicle number: 13479, travel distance X-axis: 875 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 300 kg, rotary table diameter: 500 mm, spindle speed (max.): 7,000 rpm, Machine can be shipped free of charge for €1,850 net! TECHNICAL DETAILS Control: Heidenhain TNC 410 Travel X / Y / Z: 875 / 500 / 500 mm Quill stroke: 75 mm Table NC rotary table: 500 mm C-axis: 360° B-axis: ± 30° Speed: 11 rpm Resolution: 0.001° Part accuracy: ±15'' Table load: 300 kg Drive Drive power (100% / 40% duty cycle): 7.5 / 11 kW Torque (100% / 40% duty cycle): 266 / 390 Nm Speed: 20 - 7,000 rpm Vertical milling head Quill stroke (vertical and transverse): 75 mm Swivel range: 0 - 90° Feed drives Feed forces X, Y and Z: 8,000 N Iodpfevn Si Isx Ah Neht Rapid traverse: 15 m/min Diameter and pitch of the feed spindles: 32 / 10 mm Measuring system Direct position measuring system, resolution: 0.0001 mm Position tolerance Tp in X-Y-Z axis according to VDI/DGQ 3441: 0.010 mm Tool system Spindle cone: SK 40 (similar to DIN 2079, for tool holders according to DIN 69871 A) Number of tool positions: 16 pieces Tool diameter: 80 mm Tool diameter with free adjacent positions: 100 mm Tool length: 250 mm Tool weight: 6 kg MACHINE DETAILS Operating voltage: 400 V / 50 Hz Total power: 14 kVA Weight: 4,800 kg Dimensions: 3.0 x 2.3 x 2.2 m Control switch-on time: 50,052 h Program run: 15,142 h Spindle switch-on time: 14,430 h Coolant system Tank capacity: 120 l Flow rate at a flow pressure of 3 bar: 24 l/min

Year of construction: 1969, condition: used, machine/vehicle number: 304, Manufacturer: Hermle Model : FW 800 Machine No. : 304 Year of manufacture: 1969 Weight: approx. 1000 KG General / technical data: Iedpsdgrwdofx Ah Neht well preserved used horizontal milling machine with hydraulic program control (cam control bar) for automatic production process. admission: SK 30 travel: X 400mm Y 370mm Z 165mm Speed: 18 pieces mechanically switched in 2 motor steps 85, 120, 145, 180, 205, 280, 300, 400, 470, 590, 680, 840, 100, 1210, 1420, 1780, 2030, and 3050 rpm feeds: in X and y axis stepless hydraulic in z ( horizontal milling spindle) manual table dimensions (rigid table): 800mm x 220mm power supply / spindle motor power: 380Volt 50 HZ / 1,5 KW approx. space requirement of the machine: 1900mm x 1100mm x 1700mm (bxtxh) Accessories / special equipment: - Rigid fraestable - Item various tool holders - spittoon - cooling device - Machine documentation with program instructions Remarks The machine is in a very good condition according to its age. The machine is preferably designed for the production of small and medium series. The machine has a simple hydraulic program control controlled by a cam switch.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 28,384 h, functionality: fully functional, machine/vehicle number: 15594, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, swivel angle A-axis (min.): -90 °, swivel angle A-axis (max.): 20 °, TECHNICAL DETAILS Control: Heidenhain iTNC 530 X-axis: 600 mm Y-axis: 450 mm Z-axis: 450 mm A-axis rotation range: +20° / -90° C-axis rotation range: 360° Rotary table diameter: 280 mm Spindle data Spindle mount: HSK A 63 Tool changer: 30 positions Feeds and speed Feed range: 1 - 30,000 mm/min Rapid traverse speed: 35 m/min MACHINE DETAILS Machine weight: approx. 6,500 kg Control switch-on time: 64,299 h Machine switch-on time: 61,676 h Program run: 29,320 h Spindle hours: 28,384 h Drive hours: 37,893 hours Isdpovytgfsfx Ah Nsht

Year of construction: 1997, condition: ready for operation (used), X-travel: 630mm, y-travel: 500mm, z-travel: 500mm, table diameter: 900x528mm, NC rotary table diameter: 500mm, connected load: 14kVA, length: 3600mm, width: 3900mm, height: 2100mm, weight: 6t, with documentation. Iodpfx Aolc N Steh Neht

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 18,000 rpm, swivel angle A-axis (min.): -115 °, swivel angle B-axis (max.): 30 °, TECHNICAL DETAILS X-travel: 1,000 mm Y-travel: 1,100 mm Z-travel: 700 mm A-axis: -115° / +30° C-axis: 360° Control: Heidenhain 530 i TNC Spindle Tool holder: HSK-A63 Main spindle speed: 18,000 rpm Tool changer Number of tools: 60 Table Table size: 1,150 mm x 900 mm Max. table load: 2,000 kg MACHINE DETAILS Total power requirement: 41.00 kW Machine weight: approx. 22.00 t Space requirement: approx. 6.50 x 3.00 x 3.70 m EQUIPMENT - Electric handwheel HR 410 - KSS Knoll / IKZ 40 bar - chip conveyor Ihodpfxjvrd Hyj Ah Not - Oil mist extraction Handte

Condition: used, machine/vehicle number: 2880, x-travel:290 mm y-travel:120 mm z-travel:350 mm table surface area:690 x 175 mm spindle taper:SK40 turning speeds steps:17 feed range:42 - 680 mm/min feed steps:14 turning speed range:50 - 2240 U/min Ihsdpecxxntjfx Ah Njt weight of the machine ca.:0,6 t with swivelling vertical head +/- 90°, double-pole switchable, reversing spindle drive, vernier hand wheels on all 3 axes plus fast-adjustment on x-axis with capstan, x-axis with electric feed, feed steps adjustment via change gear, upper rail for horizontal milling, triple cam switch on x-axis for running programs, emergency cut-offs on control panel and main switch

Condition: excellent (used), Year of construction: 2017, operating hours: 16,193 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 38, swivel angle A-axis (min.): -139 °, swivel angle A-axis (max.): 91 °, swivel angle C-axis (max.): 360 °, A similar machine was recently successfully auctioned! Bidding obliges the buyer to pick it up on time by March 31, 2025! TECHNICAL DETAILS X-axis travel: 850 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Control type: Heidenhain TNC 640 Rapid traverse linear X-Y-Z: 35 - 35 - 35 m/min Linear acceleration X-Y-Z: 6 m/s² Linear feed force X-Y-Z: 7,000 N Max. jaw width: 625 mm Workpiece dimensions Max. diameter: Ø 650 mm Max. height: 500 mm Interference circle (A-axis) in 0° position: Ø 885 mm Spindle data Speed: 15,000 rpm Power/torque: 20% duty cycle, 20 kW / 173 Nm Tool holder: SK 40 Tool interface Type: SK 40 Magazine positions: 38 pieces Chip-to-chip time: approx. 6 s Tool length: max. 300 mm Tool diameter with adjacent position occupied: Ø 80 mm Tool diameter without adjacent position occupied: Ø 125 mm Tool weight: max. 8 kg Magazine load: max. 152 kg Swivel rotary table Clamping surface: Ø 650 x 540 mm Centering hole: Ø 32 H7 Swivel range: +91° / -139° Drive type C axis: worm Speed of swivel axis A: 25 rpm Speed of rotary axis C: 30 rpm Table load One-sided drive: 600 kg Accuracy according to ISO 230-2 Deviation (A in X-Y-Z axis): ≤ 0.006 mm Cooling system (IKZ) Standard tank capacity: 122 l Cooling lubricant tank capacity: max. 570 l at 40 bar Pressure: max. 40 bar Flow rate: 11/27 l/min Mains connection (IKZ): 400 V / 50/60 Hz Power consumption (IKZ): up to 20 kVA Filter: police filter, paper belt filter Operating pressure Hydraulic pressure: 120 bar Compressed air: 6 bar Lubrication system: minimum quantity grease lubrication MACHINE DETAILS Control switch-on time: 24,403 h Machine switch-on time: 23,349 h Program run: 16,193 h Spindle time: 13,916 h Weight: approx. 9.5 t Iodpfx Asv Hmdqeh Noht Mains connection Voltage: 400 V / 50/60 Hz Power consumption: up to 30 kVA EQUIPMENT - BLUM measuring probe - BLUM tool laser measurement - Extendable chip drawer - Swivel rotary table - Chip flushing gun - Emulsion mist extraction - Scraper belt conveyor - Blow-off device - Blowing air through the center of the spindle - Manual cabin door - Manual cabin roof - Polycarbonate safety windows - Electrical heat compensation from Heidenhain. - Electrical manual control module from Heidenhain.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, table width: 1,000 mm, table length: 560 mm, TECHNICAL DETAILS Travel distances x-axis travel: 800 mm y-axis travel: 600 mm Ijdjwynucspfx Ah Njht z-axis travel: 500 mm Table Clamping surface: 1,000 × 560 mm Spindle Milling spindle speed: 10,000 rpm Tool holder – diameter: SK40 mm Control CNC control: TNC430 Tool magazine Number of tools: 30 MACHINE DETAILS Electrical data Total power requirement: 35 kW Weight and dimensions Machine weight: approx. 8.50 t Space requirement: approx. 2.90 × 3.50 × 3.00 m EQUIPMENT Swivel vice integrated into the left side panel with counter bearing (controlled 4th axis) Centre height 160 mm / centre width 500 mm Wireless measuring probe MP10 Chip tray with coolant pump

Condition: ready for operation (used), Year of construction: 1999, operating hours: 2,466 h, functionality: fully functional, machine/vehicle number: 13147, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, table width: 560 mm, table length: 1,000 mm, TECHNICAL DETAILS Travel X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm Spindle Speed range: 20 – 12,000 rpm Tool holder: SK40 Table Dimensions: 1,000 x 560 mm Tool magazine: 30 positions MACHINE DETAILS Weight: 7,000 kg Ijdpow Nqh Asfx Ah Njht Spindle hours: 2,466 h Machine operating hours: 34,485 h Power: 15 kW (at 40% duty cycle) Frequency: 50 Hz Operating voltage: 400 V Control voltage: 24 V Total rated current: 44 A EQUIPMENT Chip tray Heidenhain TNC430 control Heidenhain touch probe system Extraction unit Electronic handwheel

Condition: good (used), Year of construction: 1994, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 430 mm, feed length Z-axis: 400 mm, spindle speed (max.): 3,550 rpm, spindle speed (min.): 17 rpm, For sale is a CNC / conventional milling machine of the Hermle brand and type UWF 802 M The machine is in good - very good condition and ready for immediate use Technical data Year of construction: 1994 Control: Heidenhein TNC 124 Clamping: Rigid angle table Speed: 17 to 3550 rpm Feed: Stepless Drive power: 6 KW Travel X 500 mm Travel Y: 430 mm Z travel: 400 mm Tool holder SK40 Isdsrvitlepfx Ah Njht Dimensions: L*W*H: 1800*1800*1900 mm Weight: 1.8 t On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 1991, condition: good (used), Hermle UWF 802 M tool room milling machine with Hermle HS track control. Machine is in good working condition, under current demonstration ready. Ihjdpsdubmkefx Ah Net

Condition: excellent (used), Year of construction: 1999, Hermle UWF 802 M Hermle UWF 802 M with NC control HS, cycle-controlled, year of manufacture 1998, in excellent original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical specifications: Travel paths X: 500 mm, Y: 430 mm, Z: 400 mm Table size: 800 x 390 mm Spindle taper: ISO 40 Spindle speed: 71 to 3550 rpm, 18 steps Feed rate X and Y: 2 to 1600 mm/min, stepless Feed rate Z: 2 to 1000 mm/min, stepless Rapid traverse X and Y: 1.6 m/min Rapid traverse Z: 1 m/min Spindle drive: 3 kW Power connection: 400 Volt, 50 Hz - Spindle speed adjustable in 18 gear steps - Vertical milling head swivels to the right and left - Hydro-mechanical tool clamping vertical and horizontal - Automatic central lubrication - Separate coolant unit - Control cabinet fixed to the machine - Fixed angle table - Operating manual and wiring diagram Required space (L x W x H): 2000 x 1800 x 1950 mm Weight: approx. 1750 kg Iodpfxswyn Rqe Ah Noht Accessories and equipment: Operating manual, electrical diagrams Machine feet About the machine: We offer a Hermle UWF 802 M milling machine with NC control HS, cycle-controlled, year of manufacture 1998, in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Hermle runs very quietly. This newer generation of milling machines is very user-friendly. Take this opportunity to view the machine under power on-site and see its condition for yourself.