Used Hermle Uwf 802 M for sale (148)

Year of construction: 1995, condition: ready for operation (used), Travel X/Y/Z: 850mm/630mm/500mm, table dimensions X/Y: 1200mm/550mm, max. table load: 700kg, tool holder: SK40, tool stations: 34, speed: 5000rpm, spindle head swivel: +/-90°, feed rate: 10m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4000mm/2800mm/2400mm, weight: approx. 6800kg. Documentation available. An on-site inspection is possible. Isdpjxwct Sofx Ah Noht

Condition: used, Year of construction: 1996, Technical details: x-travel: 600 mm y-travel: 450 mm z-travel: 400 mm control: Heidenhain TNC 425 spindle taper ISO: SK 40 DIN 69871 quill stroke vertical: 75 mm distance between column - table edge: 190 (fest) vertikal mm spindle head swivable left - right: 90° Vertikal-Spindel ° distance between table/spindle: min./max.: 165/565 Vertikal-Spindel mm distance between table/spindle: min./max.: 165/565 Horizontal-Spindel mm turning speed range: 20 ... 4500 U/min Iedpou Nc T Rsfx Ah Neht tool changer with: 32 tools (Typ HTC 32) feed:: 1 ... 5000 mm/min Table dimensions: 850x440 mm table swivelabel +/-: nein = starr ° table load: 500 kg total power requirement: 15 kW weight approx.: 3500 kg dimension machine xH: 2,5 x 3,0 x 2,1 m dimensions electric cabinet LxWxH: 1,6 x 0,6 x 1,7 m Universal Milling and Drilling Machine Equipment: - cooling tank capacity 100 litres, flow rate 16 l/min - control panel with jib length arm - hand wheel control unit - 8 pieces machine base The machine can be demonstrated under power. i.D. *

Condition: good (used), machine/vehicle number: 5387, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 45 rpm, mount diameter: 40 mm, total height: 1,900 mm, total width: 1,200 mm, total length: 1,500 mm, table width: 280 mm, table length: 700 mm, overall weight: 1,000 kg, Including three-axis digital readout Ihjdpfowxpx Hjx Ah Net

Condition: used, Year of construction: 1990, x-travel 600 mm y-travel 400 mm z-travel 420 mm control TNC 355 Heidenhain Main spindle: turning speed range - main spindle 20 - 4.000 min/-1 power capacity - main spindel 7 kW Isdpfotqmm Aox Ah Noht transmission ratio 3 tool taper SK 40 distance spindle /table 127 - 567 mm spindle diameter in front bearing 55 mm stroke of quill vertical 75 mm tool clamping 10 kN swivellable +/- 90 ° work table: table surface area 900 x 458 mm T-slots 7x 63 x 14H7 feeds: feed range 1 - 5.000 mm/min Feed force 5,4 kN rapid traverse ( X / Y / Z ) 7 / 7 / 6 m/min total power requirement 13 kW weight of the machine ca. 3,0 t dimensions of the machine ca. 4,0 x 4,0 x 2,1 m Tool Room Milling Machine - Universal HERMLE - UWF 900 E - Spindle-Head swivable +/- 90°

Year of construction: 1983, condition: used, Universal tool milling machine Hermle Ihjdpfx Aholqx Azj Not Type UWF 700 year of manufacture 1983 table 700 x 285 mm travel X / Y Z 400 / 290 / 380 mm mounting SK 40 spindle speed 40 - 2000 rpm quill stroke 63 mm drive power 2,2 kw Digital display counterholder weight 1500 kg

Condition: used, CNC universal tool milling machine HERMLE type UWF 900 E Machine No. 10829, Year of manufacture 1995 CNC contouring control Heidenhain TNC 415 B NC software 280540, PLC software 277677 06 Travel paths X: 600 mm, Y: 400 mm, Z: 400 mm Table size 900 x 458 mm Spindle mount ISO 40 Distance table to spindle nose 40 to 440 mm Spindle speed 20 - 4000 rpm, continuously variable Feed rate 1 to 3000 mm/min Rapid traverse X and Y = 7 m/min. Z = 6 m/min. Spindle drive 7 kW Quill stroke (vertical head) 60 mm - Spindle speed via 2 gear stages and continuously variable via frequency converter - Hydro-mechanical tool clamping vertically and horizontally Ihjdpfx Ahjwaaqis Not - Thread cutting without compensating chuck - Electronic handwheel - RENISHAW 3D scanning head - Coolant system adjacent, capacity approx. 130 liters - Automatic central lubrication system - Fixed angle table - Fully protective cabin - 32,279 recorded spindle operating hours - Pivoting control panel - Operating instructions and electrical diagram Space requirements L x W x H 2700 x 3500 x 2100 mm Weight 3 tons.

Condition: ready for operation (used), A CNC universal tool milling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, table dimensions X/Y: 1000mm/500mm, quill stroke: 100mm, tool holder: SK40, spindle speed: 3150rpm, feed rate: 2m/min, rapid traverse: 5m/min, max. workpiece weight: 400kg. Machine dimensions X/Y/Z: approx. 3900mm/3300mm/2100mm, weight: approx. 3300kg, control: Heidenhain TNC 150. An on-site inspection is possible. Iodpfxsxwcu Ao Ah Noht

Condition: used, Year of construction: 1996, Technical details: x-travel: 600 mm y-travel: 450 mm z-travel: 400 mm tool taper: IBAG SKI 25 control: Heidenhain TNC 425 quill stroke vertical: nicht bekannt mm turning speed range: 2400 - 24.000 U/min feed:: 1 ... 5000 m/min m/min table surface area: 850 x 440 mm table swivelabel +/-: starr ° table load: 500 kg tool holder / places: 32 places für IBAC SKI 25 weight approx.: 3600 kg dimension machine xH: 2,5 x 3,0 x 2,1 m dimensions electric cabinet: L:1550 X B:550 x H:1700 mm Universal Milling and Drilling Machine - with IBAG high frequency spindle type HF 100A-30/24 - milling spindle taper Tool taper IBAG SKI with IBAG tightening bolt - cooling tank, capacity 16 l/min and 100 litre capacity Isdpou Nc Uhsfx Ah Noht Accessories: - 3-D push-button Heimer - Vertical head Hermle - Tool holders according to availability i.D. *

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, table width: 520 mm, table length: 900 mm, overall weight: 4,500 kg, controller manufacturer: Heidenhain, TECHNICAL DETAILS Table size: 900 x 520 mm Ihsdoxl Sy Dspfx Ah Njt MACHINE DETAILS Control: Heidenhain Installation dimensions LxWxH: 3.16 x 3.62 x 2.37 m Weight: 6,000 kg Electrical data Operating voltage: 400 V / 3~ Mains frequency: 50 Hz Control voltage: 24 V Total rated current: 23 A Total power: 16 kVA Weight: 4,500 kg

Condition: used, Year of construction: 1984, x-travel 410 mm y-travel 310 mm z-travel 400 mm table-size 700 x 280 mm control Heidenhain TNC 145 tool adaptor SK40 turning speed range 40- 2.000 U/min rapid speed 1,5 m/min Iedpfx Ahoxlufpo Nsht feed speeds 1500 mm/min power requirement 2.2 kW quill stroke 63 mm weight 1,3 t total power requirement 2,2 kW weight of the machine ca. 1,5 t dimensions 1,4 x 2,1 x 2,0 m Features: - New TFT screen - Coolant system - Hydraulic tool clamping - Milling head with spindle sleeve - Documentation

Condition: ready for operation (used), x-travel 510 mm y-travel 450 mm z-travel 410 mm taper in main spindle MAS BT 45° (SK40) table surface area 800 x 395 mm T-slots 6 Stk. turning speeds 50 - 2500 U/min feed stepless 4-1600/4-1000 mm/min voltage 400 V total power requirement 5.0 kW weight of the machine ca. 1400 kg range L-W-H 2300 x 2300 x 1800 mm from a training workshop maintained condition (!!) - in checked conditions - machinevideo - ?v=iSTVEdv2fO8 Furnishing : - robust universal milling machine - swiveling control panel, right front - rotatable universal milling head (re/li = 90°) Ihedsxaam Uopfx Ah Nst * with hydraulic tool clamping - manual milling spindle feed, with locking - swiveling milling spindle protection - Stable T-slot clamping/angle table - Axis feeds with rapid traverse - Central lubrication unit - Control cabinet, installed on the left * Digital display - without function

Condition: good (used), Year of construction: 1991, Travel range: X= 600, Y= 400, Z= 420 mm Speed range: 20 – 4000 rpm Gear stages: 3 Spindle taper: SK 40 Quill stroke: 75 mm Spindle motor: 5.9 kW Feed range: 1 – 5000/6000 mm/min (manual/programmed) Iodjwvif Ujpfx Ah Njht Rapid traverse x, y: 7 m/min Rapid traverse z: 6 m/min Clamping area: 900 x 458 mm Weight: approx. 2300 kg With coolant system, electronic handwheel, measuring probe (defective)

Year of construction: 1990, condition: ready for operation (used), Travel X/Y/Z: 700mm/550mm/500mm, table dimensions X/Y: 1000mm/490mm, tool holder: SK40, speed: 3150rpm, quill stroke: 100mm. Machine dimensions X/Y/Z: approx. 3500mm/2500mm/2100mm, weight: approx. 3300kg, control: Heidenhain 415, operating hours: approx. 64000h. Including coolant pump and an enclosed length measuring system LS403C. Documentation available. An on-site inspection is possible. Iodpfx Aoxvrvgjh Neht

Year of construction: 1989, condition: used, control: Heidenhain TNC 355 table size: 900 x 465 mm travel: X-600 mm, Y-400 mm, Z-420 mm tool taper: SK 40 quill stroke: 75 mm spindle speed: 20–4000 rpm feed: 1-5000 mm/min Ihodpfohd Rm Usx Ah Not

Condition: good (used), CNC - Universal Milling Machine HERMLE UWF 902-S -Heidenhain 426 - Control -Year of manufacture: 1997 -Traverse paths X/Y/Z: 600-450-500mm -Tool holder: SK 40 -Vertical - horizontal milling device -Quill feed -Coolant system -Angle table -Machine enclosure -Documentation Dimensions: LxWxH 3.9x2x2 meters / Weight 4000Kg Ihodpfxjxb Azwo Ah Not Errors and omissions excepted.

Condition: used, Year of construction: 1986, x-travel 390/410 mm y-travel 290/310 mm z-travel 380/400 mm total power requirement 4 kW weight of the machine ca. 1,25 t dimensions of the machine ca. 2100x2100x1700 m Ihedpfx Ahjvylkce Not technical data please see attachment!

Year of construction: 1989, condition: used, Hermle Universal Milling Machine Iedpfxoihqatj Ah Neht Type UWF 801 working range longitudinal X axis 500 mm transverse y axis 430 mm vertical Z axis 400 mm clamping surface 800 x 220 tool holder SK 40 spindle motor 3 KW quill stroke vertical 80 mm Control TNC 114

Condition: used, Year of construction: 1990, x-travel 400 mm y-travel 330 mm z-travel 350 mm total power requirement 6,3 kW Iodpst Hxbwofx Ah Noht weight of the machine ca. 2 t dimensions of the machine ca. 736 m

Condition: used, Year of construction: 1989, x-travel 600 mm y-travel 450 mm z-travel 400 mm table-size 850 x 440 mm spindle taper SK 40 control HEIDENHAIN TNC 355 ATC 32 Pos spindle turning speed range 20 - 4000 U/min spindle drive 5,9 kW quill stroke 80 mm feeds longditudinal/cross/vertical 1 - 2000 mm/min power feed x/y/z 7200 N rapid traverse longitudinal and cross 10 m/min rapid traverse vertical 10 m/min total power requirement 12 kW weight of the machine ca. 3 t dimensions 2,7 x 2,5 x 2,0 m Acc.: NC-dividing unit (=4th axis) make WALTER with 3-jaw chuck 160 mmø, vertical head with hydr. tool clamping and quill retraction, solid table, various tool fixtures, electron. hand wheel, coolant Ijdstqqn Dopfx Ah Njht

Year of construction: 1990, condition: ready for operation (used), Year of manufacture: approx. 1990, travel X/Y/Z: 600mm/400mm/420mm, speed: 4000rpm, tool holder: SK40, table-spindle distance: 127mm-567mm, spindle head swivel: +/-90°, table dimensions X/Y: 900mm/450mm, feed: 5m/min, rapid traverse X/Y/Z: 7m/7m/6m/min. Machine dimensions X/Y/Z: approx. 4000mm/4000mm/2100mm, weight: approx. 3000kg, control: Heidenhain TNC 355. The controller of the motor spindle has problems. Documentation available. On-site inspection is possible. Iodpfx Ahjwynvys Njht

Condition: good (used), BHG Hermle CNC milling machine Type: UWF 1000 Control: Heidenhain TNC 355 X-path: 700 mm Y-path: 550 mm Z-path: 500 mm Bed: 490 x 1000 mm Spindle: ISO 40 Speed: 3150 rpm Iedpfoqwgzbsx Ah Nsht Year of manufacture: 1988 Including documentation and parameters Dimensions: 230x200x220 cm LxWxH Weight: approx. 4000 KG

Year of construction: 1983, condition: used, Hermle UWF 700 Brief description: Universal tool milling machine Universal tool milling machine Hermle Type UWF 700 year of manufacture 1982 table 700 x 285 mm travel X / Y Z 400 / 290 / 380 mm mounting SK 40 spindle speed 40 - 2000 rpm quill stroke 63 mm Iedpfxokhc A Do Ah Neht drive power 2,2 kw Digital display counterholder weight 1500 kg

Condition: used, Year of construction: 1994, x-travel 850 mm y-travel 630 mm z-travel 550 mm table surface area 1200 x 550 mm spindle taper SK 40 spindle turning speed range 20 - 4200 U/min spindle drive 11,5 kW quill stroke 95 mm feeds longditudinal/cross/vertical 1 - 10.000 mm/min Ijdpfxjtqqyij Ah Neht rapid traverse longitudinal and cross 10 m/min rapid traverse vertical 10 m/min control HEIDENHAIN, TNC 426 total power requirement 21 kW weight of the machine ca. 6 t dimensions of machine L x W x H 4,95 x 2,30 x 2,30 m Accessories: NC-dividing unit (= 4th axis) with tailstock, make HOFMANN, model RWNC-160; vertical head with hydr. tool clamping and quill retraction, solid table, electron. handwheel, coolant

Year of construction: 1994, condition: ready for operation (used), A CNC universal tool milling and drilling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, quill stroke: 95mm, spindle power: 12kW, spindle speed: 4200rpm, spindle swivel: +/-75°, tool holder: SK40, clamping force: 12kN, feed rate: 10m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4400mm/4250mm/2300mm, weight: approx. 4500kg, control: Heidenhain TNC 425. Documentation available. An on-site inspection is possible. Iodew D Evlepfx Ah Nsht

Condition: excellent (used), Year of construction: 1986, x-travel 500 mm y-travel 430 mm z-travel 400 mm table surface area 800 x 390 mm Ihedjwi Ugdspfx Ah Net spindle taper SK 40 spindle turning speed range 40 - 2000 U/min spindle drive 3 kW quill stroke 80 mm feed - longitudinal/cross 4 - 1600 mm/min feeds vertical 4 - 1000 mm/min rapid motion -longitudinal/cross/vertical 1,6 / 1,6 / 1,0 m/min control HEIDENHAIN, TNC 135 total power requirement 5 kW weight of the machine ca. 1,4 t dimensions of machine L x W x H 2,3 x 2,3 x 1,7 m Accessories: vertical head with hydr. tool clamping and quill retraction, solid table, coolant