Used Hermle Uwf 800 for sale (152)

Condition: reconditioned (used), Year of construction: 2016, CNC Vertical Machining Center HERMLE C 400 U With Heidenhain TNC 640 CNC Control Year of manufacture: 09/2016 Travel distances: X 850 Y 700 Z 500 mm Spindle speed range: 20 – 18,000 rpm, stepless Including the following accessories: - NC rotary swivel table Ø 650 mm x 540 mm (T-slots for SRT) - Vertical tool changer with 38 magazine slots (HSK 63) - Additional magazine with 50 magazine positions (ZM 50) - Through-spindle coolant supply 40 bar with paper band filter - Scale air purging - Fine filter for through-spindle coolant supply 40 bar - Scraper belt conveyor Dwjdpjw Ewmfjfx Ab Tof - Chip cart 450 liters - Coolant unit - Air blow-off unit - Spindle center compressed air - Manual cabin door, manual cabin roof - Polycarbonate safety windows - Electronic thermal compensation - Electronic handwheel - BLUM tool breakage/control & measurement A2 - Heidenhain 3D touch probe - Chip rinsing pistol - Oil mist extraction unit - Control cabinet cooling device (RITTAL) - 4 adjustable machine feet - Operating manuals

Condition: used, Year of construction: 2013, x-travel 450 mm y-travel 600 mm z-travel 330 mm control iTNC 530 HSCI Heidenhain turning speeds max. 18.000 min/-1 power capacity - main spindel 31 / 17 kW max. Torque 98 / 54 Nm tool taper HSK A63 rotary table dia. 320 mm Swivel range A: +/- 135 ° rotatable C: 360 ° max. table load 300 kg Number of revolutions A: 25 / C: 40 rpm T-slots 4x 14H7 number of toolpositions 55 pos. tool taper HSK A63 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 250 mm max. tool weight 8,0 kg max. total weight 220 kg change-time chip to chip 4,5 sec Accelaration 8 m/sec² Feed force 4,5 kN Dsdpfx Abot Syf Uj Tswf rapid traverse ( X / Y / Z ) 30 m/min total power requirement 40 kVA weight of the machine ca. 9,0 t dimensions of the machine ca. 6,5 x 6,5 x 3,5 m 5 Axis - CNC Machining Center Universal HERMLE - C 22 U - Good condition! - Linear axes XYZ and drives renewed - new spindle Q1/2024 - Optional: Internal coolant supply retrofitting possible (by Hermle, for an additional charge) - Additional container with paper belt filter incl. level monitoring - Conversion of coolant lubricant tank (lifting pump incl. level monitoring)

Condition: used, Year of construction: 2006, x-travel 850 mm y-travel 700 mm z-travel 500 mm Control HEIDENHAIN iTNC 530 rotary table 800 mm c-axis 0.001º ( ±360º) 0 B-axis (table) º mm number of spindle speeds 18.000 U/min/rpm tool taper SK 40 DIN 69871 spindle drive 15 kW max. torque on the spindle 130 Nm Tools changer 38 fach/tools Internal cooling system 80 bar Dodexrvldopfx Ab Tewf handwheel HR- 410 total power requirement 41 kVA weight of the machine ca. 10,5 t Equipment- Paper belt filter – 200 l tank- Active control cabinet cooling- Infrared probe M&H (Heidenhain)- Laser tool measuring system Blum- Chip conveyor- Cleaning pistol with pump 2 bar / 40 l min- 3D Quick Set- Electronic handwheel

Condition: good (used), Year of construction: 2001, travel distance X-axis: 1,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 1,000 kg, Equipment: chip conveyor, TECHNICAL MACHINE BENEFITS: - RAPID TRAVERSE IN ALL AXES 30 M/MIN Dsdpsv Hxifjfx Ab Tjwf - CHIP-TO-CHIP TIME 6.5 S - NC SWIVEL ROTARY TABLE - CLAMPING SURFACE: Ø 800 MM - SWIVEL RANGE: +15°/-97° - SPEED DRIVE POWER/TORQUE/TOOL CONSUMPTION - 10000 1/MIN 25 KW/159 NM (40% ED) / SK 40/HSK A 63 - 16000* 1/MIN 15 KW/130 NM (40% ED) / SK 40/HSK A 63 - 24000* 1/MIN 23 KW/79 NM (40% ED) / HSK A 63 - 30 SEATS QUALITATIVE MACHINE BENEFITS: - INTERNAL COOLANT SUPPLY 40 BAR - HEIDENHAIN MEASURING PROBE WITH RADIO - ELECTRIC HEAT COMPENSATION - ELECTRONIC MANUAL CONTROL MODULE - OIL MIST EXTRACTION - CHIP CLEANING GUN - BLOW-OFF DEVICE - SEALING AIR FOR STANDARDS - A AXIS +15º / -97º C AXIS 360º - C AXIS 360º

Condition: used, Year of construction: 2022, Milling machines Dwsdow D E Hkopfx Ab Tjf Travel distance X: 1050 mm Travel distance Y :900 mm Travel distance Z: 600 mm HSC-machines Number of axis: 3 milling machine / machining center Control: Heidenhain spindle chuck: HSK63 spindle revolutions: 20000 rpm tool changer: 120 - time spindle cooling chip conveyor control Heidenhain Heidenhain control unit, type iTNC 530 Table load capacity: 3,000 kg Knoll chip conveyor Tool changer for 120 tools

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 12644, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN TNC 426, spindle speed (max.): 15,000 rpm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned as part of a business liquidation. Bids are binding and require timely collection between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Travel distances Travel distance X-axis: 1,200 mm Travel distance Y-axis: 900 mm Travel distance Z-axis: 500 mm Spindle Dwjdpfx Aoxqfzrsb Tof Minimum distance from working spindle to top edge of table: 180 mm Maximum distance from working spindle to top edge of table: 680 mm Milling spindle diameter at front bearing: 70 mm Spindle speed: 15,000 rpm Tool holder: HSK A63 Feed Feed rate X-axis: 1 – 3,000 mm/min Feed rate Y-axis: 1 – 3,000 mm/min Feed rate Z-axis: 1 – 3,000 mm/min Work table Table dimensions: 1,400 x 900 mm Number of T-slots: 14 MACHINE DETAILS Control: HEIDENHAIN TNC 426 Electrical data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Rated current: 31 A Connected load: 45 kVA Dimensions & weight Dimensions (L x W x H): 6,000 x 3,200 x 2,900 mm Weight: 12,000 kg EQUIPMENT 30-position tool changer Measuring probe Tool holders in the tool changer Note: Transport can be carried out on a truck up to 3,000 mm width.

Condition: good (used), Year of construction: 2017, operating hours: 12,141 h, travel distance X-axis: 600 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 35 m/min, controller model: Heidenhain iTNC640, spindle speed (max.): 15,000 rpm, We offer in good condition Hermle C250U with following options: Heidenhain TS460 touchprobe Blum Laser Internal coolant 40 bar with paperbelt filter Air true Spindle Dwodpoxqd S Nefx Ab Tsf

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: Heidenhain, controller model: 530, rotary table diameter: 280 mm, spindle speed (max.): 16,000 rpm, 5-axis machining center Manufacturer: Hermle Model: C20U Year of manufacture: 2006 Control: Heidenhain iTNC-530 Power-on hours: approx. 48,000 h Spindle hours: approx. 20,500 h Serial number: XXXXX Technical specifications: ----- • Travel (X-Y-Z): 600 x 450 x 450 mm • C-axis: 360° • A-axis: +/-115° • Swivelling rotary table Ø280 mm Dwsdpfowqnnkjx Ab Tjf • Spindle: 16,000 rpm • Magazine: 30x SK-40 • Additional magazine with 43 stations • Standard coolant system • Air blast through spindle + blow-off device • Blum laser for tool breakage detection and measurement • Renishaw 3D probe • Electrical thermal compensation • Sealing air for glass scales • Chip conveyor Accessories: ----- • Documentation • Rinsing gun • Handwheel • Maintenance history

Condition: used, Year of construction: 2022, x-travel 450 mm y-travel 600 mm z-travel 330 mm Dodpjwh Uktofx Ab Towf Control Heidenhain TNC 640 spindle HSK A 63 turning speeds 18000 U/min swivable table: STP 320mm Tools changer 55 fach/tools Internal cooling system 80 bar Chip coveyor JA Spindle hours 7521 h Machine on 10.532 h weight of the machine ca. 8,7 t 5-axis CNC machining center -Equipment & accessories -Dynamic Efficiency (ACC, AFC, vortex milling), -Dynamic Precision (CTC,AVD,LAC), -Additional magazine ZM216, torque drive in the C axis, -Spur gear tandem drive -in the A-axis, car. Cabin roof including side panel, interior -Scratch belt conveyor, chip washing gun, electric. heat compensation, -Tool breakage monitoring, robot cell RS05-2

Condition: used, Year of construction: 2004, x-travel 650 mm y-travel 600 mm z-travel 500 mm control Sinumerik 840 D pl Siemens turning speed range - main spindle 20 - 28.000 min/-1 power capacity - main spindel 23 / 18 kW max. Torque 79 Nm Dwedpfxsxmagzs Ab Tsf tool taper HSK-A63 table surface area Ø 630 mm Swivel range A: +30° / -115 ° rotatable C: 360 ° max. table load 500 kg max. workpiece sizes Ø 630 x 313 mm table speed A:25 / C:65 min/-1 number of toolpositions 117 pos. max. tool diameter 90 (125) mm max. tool length 300 mm rapid traverse ( X / Y / Z ) 60 m/min Accelaration 10 m/s² feed power 8,5 kN total power requirement 43 kVA weight of the machine ca. 10,5 t dimensions of the machine ca. 8,5 x 5,5 x 3,0 m 5 Axis CNC - Machining Center Universal HERMLE - C 30 UP Dynamic - FASTEMS - incl. FASTEMS FPC-400 Pallet-System / 15-pos. - palletchanger - Tool-Magazine 117 pos. - ca. 9.000h Spindle-hrs. after change

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, overall weight: 6,200 kg, Equipment: documentation/manual, rotational speed infinitely variable, This listing is exclusively for a robotic cell that originally serviced two Hermle C40U machines. Only the robotic cell is for sale, without any machines. This is ideal for retrofitting automation onto existing machines or as a source for spare parts. Dwsdpsw Sdc Sofx Ab Tof - Year of manufacture: 2008, KUKA robot KR210-2 2000, maximum pallet weight 200 kg - Controller: KRC 2 - Designed for pallet handling, not for individual parts - Rack with 51 pallet positions - Setup station - Configured for two machines - Scope of supply: Robotic cell with KUKA robot, controller and KPC2 panel, 16 matching pallets, and adapter plates for integration with machines Very well maintained condition The robot was fully functional until it was dismantled. Note: The robotic cell is immediately available.

Condition: ready for operation (used), Year of construction: 1999, operating hours: 26,863 h, functionality: fully functional, machine/vehicle number: 12803, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller model: HEIDENHAIN TNC 430, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Bidding constitutes an obligation for timely collection between 01.12.2025 and 05.12.2025! TECHNICAL DETAILS Travels Travel X: 600 mm Travel Y: 450 mm Travel Z: 450 mm Feed range in X: 1–2,000/3,0000 mm/min Feed range in Y: 1–2,000/3,0000 mm/min Feed range in Z: 1–2,000/3,0000 mm/min Rapid traverse in X axis: 35 m/min Rapid traverse in Y axis: 35 m/min Rapid traverse in Z axis: 35 m/min Clamping table surface: 800 x 465 mm Max. spindle speed: 12,000 rpm Measuring system resolution: 0.1 µm Input unit measuring system: 0.1 µm Display increment measuring system: 0.1 µm Dwsdpfxexnkfks Ab Tjf MACHINE DETAILS CNC control: HEIDENHAIN TNC 430 Dimensions & Weight Dimensions (L x W x H): 2800 x 2100 x 2700 mm Weight: 6,700 kg Operating hours Spindle hours: 26,863 h CNC controller operation hours: 81,084 h EQUIPMENT Individual feed motors for each axis – three-phase (brushless) Note: The clamping devices (vices, chucks, etc.) mounted on the worktable are not included in the scope of sale or delivery. The machine is offered without tool holders and tools.

Condition: good (used), Year of construction: 2022, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, Machine hours ON 10,500 Spindle hours 4,400 Hermle C 400 U, Year of manufacture 2022, Control Heidenhain TNC 640, Travel X/Y/Z 850/700/500 mm, 2-axis NC swivel rotary table Ø 650 mm, Tool changer with 38 positions, Additional magazine with 88 positions - can be extended as required, C axis with worm drive, A axis single-sided drive, Spindle speed up to 18,000 rpm, HSK A 63, Electronic thermal compensation, Electronic handwheel, ICS 40 bar, conveyor belt filtration system, Measuring scales with purge air, Scraper conveyor, Manual cabin door, Manual cabin roof, Blum laser for tool breakage / tool measurement, Heidenhain 3D probe, Oil mist extraction, DNC system, Dwjdpfx Aew Igf Ijb Tsf Dynamic Efficiency, Dynamic Precision, OCM - Optimized Contour Milling, 1 set of new polycarbonate viewing panels incl. seals,

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, controller model: Heidenhain iTNC530, table width: 960 mm, table length: 600 mm, overall weight: 9,000 kg, spindle speed (max.): 40,000 rpm, operating hours of spindle: 22,800 h, spindle nose: HSK E 40, number of spindles: 1, number of slots in tool magazine: 38, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, This machine has been used exclusively for copper processing. The coolant water supply is present but has not been used to date. In other words, a superb machine that has always done very light machining, has never seen coolant, and is equipped with a Weiss spindle running at 40,000 rpm. The machine comes as standard including: - Original documentation for the machine and the Weiss spindle - BLUM tool laser - Heidenhain TS-440 3D probe Dsdpjxgukbjfx Ab Tjwf - Spindle and emulsion cooler - Lockable roof (harmonica style) The machine can be inspected under power by appointment.

Condition: excellent (used), Year of construction: 2006, operating hours: 10,000 h, functionality: fully functional, NEW ARRIVAL 1 CNC MILLING MACHINE HERMLE C 600V, Year 2006 CNC CONTROL: HEIDENHAIN ITNC 530 TRAVEL PATHS: 600 x 450 x 450 mm - INFINITELY VARIABLE SPINDLE SPEED UP TO 10,000 RPM - MACHINE WITH ELECTRONIC HANDWHEEL - PROBE - APPROX. 30 TOOL HOLDERS - COOLANT SYSTEM - FIXED TABLE, ETC. Dwjdpfx Aoxf Huvob Tjf PRICE ON REQUEST plus 19% VAT, ex location, unpacked, uninsured Technical data as per attachment, non-binding - errors and prior sale excepted. Delivery: immediately – subject to prior sale. Payment: strictly net, immediately upon receipt of invoice, before removal/collection. We are happy to show you the machine under power by arrangement, demonstrating all functions.

Condition: used, Year of construction: 2013, x-travel 650 mm y-travel 600 mm z-travel 500 mm Control iTNC 530 Heidenhain turning speeds 18.000 U/min power capacity - main spindel 10 / 15 kW tool taper HSK A 63 rotary table dia. 630 mm center bore 32 H7 Swivel range A: ° rotatable C: 360 ° max. table load 1.000 kg number of toolpositions 32 pos. tool taper HSK A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8 kg rapid traverse ( X / Y / Z ) 60 m/min Dodpfx Asuyl Tbsb Tswf Accelaration 10 m/s² feed power 8.500 N total power requirement 43 kVA weight of the machine ca. 9,5 t dimensions of the machine ca. 15 x 7,5 x 3,5 m 5 Axis - CNC Machining Center Universal HERMLE - C 30 U Linear axes dynamic version 6-fold rotary union Blown air through the center of the spindle Automatic cabin door Rotating transparent window - incl. 32x HSK 63 holders - incl. 10x collets Also available as a production cell (2x Hermle C 30 U + Kuka Automation)

Condition: good (used), Year of construction: 2004, operating hours: 109,078 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Siemens 840 D, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine HOURS: 109,078 h Spindle HOURS: 22,117 h Dwodpfexcp Slox Ab Tjf - Spindle HSK-A63 10,000 rpm - 32 tool pockets - Rotary table SRT 280 mm with integrated clamping system SK50 (if not required, this can be closed or alternatively converted for use as a zero-point clamping system) - External coolant supply - Internal coolant supply with paper band filter, 80 bar - Swarf flushing pistol - Chip conveyor - Handheld control unit - Automatic cabin door - 32 tool pockets plus 87 additional ZM87 positions - Thermal compensation - BLUM tool measurement on carriage - Renishaw probe - Chip container - Status indicator light The machine has been thoroughly inspected, and there is a geometry inspection protocol as well as circularity test measurements available. The machine can be viewed and tested under power at any time. Very well-maintained condition.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, controller manufacturer: Heidenhain, table width: 480 mm, table length: 900 mm, overall weight: 7,300 kg, Equipment: documentation/manual, TECHNICAL DETAILS Fixed table: 900 x 480 mm MACHINE DETAILS Control: HEIDENHAIN Electrical Data Net weight: 7,300 kg Operating voltage: 400 V / 3~ Mains frequency: 50 Hz Control voltage: 24 V Total power: 26 kVA Total rated current: 37 A Weight: 6,300 kg EQUIPMENT Dsdpfx Ajxl Sunjb Tewf Tool changer

Condition: good (used), Year of construction: 1999, Hermle C 600 V, year of manufacture 1999, Heidenhain TNC 430 control, travel X/Y/Z 600/450/450 mm, machine from first owner, table size 800 x 465 mm, spindle speed up to 12,000 rpm, 30-tool changer, SK 40 taper, 3D measuring probe, 9,400 spindle hours. Djdpfexmg Eqox Ab Towf

Condition: like new (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, controller model: Heidenhain iTNC530, table width: 1,070 mm, table length: 700 mm, overall weight: 10,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 16,533 h, spindle nose: SK40, number of slots in tool magazine: 38, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, Once again, a very neat HERMLE C40V coming from a mold making workshop. The machine is in excellent condition and can also be viewed under power at our facility! This machine is standard equipped with: Blum tool laser, Heidenhain TS440 probe, custom-made coolant table, lockable roof (accordion style), original documentation, spindle and emulsion cooler. Dwedpexd U N Ssfx Ab Tef

Condition: used, Year of construction: 2014, x-travel 650 mm y-travel 600 mm z-travel 500 mm Control iTNC 530 Heidenhain turning speeds 18.000 U/min power capacity - main spindel 10 / 15 kW tool taper HSK A 63 rotary table dia. 630 mm center bore 32 H7 Swivel range A: ° rotatable C: 360 ° Dsdpfx Aouyl Thsb Tewf max. table load 1.000 kg number of toolpositions 32 pos. tool taper HSK A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8 kg rapid traverse ( X / Y / Z ) 60 m/min Accelaration 10 m/s² feed power 8.500 N total power requirement 43 kVA weight of the machine ca. 9,5 t dimensions of the machine ca. 15 x 7,5 x 3,5 m 5 Axis - CNC Machining Center Universal HERMLE - C 30 U Linear axes dynamic version 6-fold rotary union Blown air through the center of the spindle Automatic cabin door Rotating transparent window - incl. 32x HSK 63 holders - incl. 10x collets Also available as a production cell (2x Hermle C 30 U + Kuka Automation)

Condition: good (used), Year of construction: 2006, operating hours: 119,571 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Siemens 840 D, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine ON: 119,571 h, Spindle ON: 56,792 h - Spindle HSK-A63 10,000 rpm - 32 tool stations - Rotary table SRT 280 mm with integrated clamping system HSK100 (if not needed, it can be covered or alternatively converted to a zero-point clamping system) - External coolant supply - Internal coolant supply with 80 bar paper band filter - Chip flushing gun - Chip conveyor - Handheld control module - Automatic cabin door - 32 tool stations plus 87 additional stations ZM87 - Thermal compensation - BLUM tool measurement on the side - Renishaw probe - Chip container - Status light The machine has been thoroughly inspected and comes with a geometry report as well as circularity test measurements. The machine can be viewed and tested under power at any time. Djdpexcp Srjfx Ab Tjwf Very well-maintained condition.

Condition: good (used), Year of construction: 1999, Hermle U 1000 T, Dwodpowlqimefx Ab Tjf Built in 1999, Heidenhain TNC 426 control, X/Y/Z travel 1000/630/550 mm, 16-station tool changer, SK 40 tool holder, Spindle speed up to 7,000 rpm, Vertical spindle quill stroke 75 mm, Universal milling head 0-90°, Direct measuring systems, Table size 1200 x 630 mm, Heidenhain TS 632 touch probe, Electronic handwheel,

Condition: used, Year of construction: 2013, x-travel 650 mm y-travel 600 mm z-travel 500 mm Control iTNC 530 Heidenhain turning speeds 18.000 U/min power capacity - main spindel 10 / 15 kW tool taper HSK A 63 rotary table dia. 630 mm center bore 32 H7 Swivel range A: ° rotatable C: 360 ° max. table load 1.000 kg number of toolpositions 32 pos. tool taper HSK A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8 kg rapid traverse ( X / Y / Z ) 60 m/min Accelaration 10 m/s² feed power 8.500 N total power requirement 43 kVA weight of the machine ca. 9,5 t dimensions of the machine ca. 15 x 7,5 x 3,5 m Dwjdouwv Dljpfx Ab Tjf 5 Axis - CNC Machining Center Universal HERMLE - C 30 U - 2x Hermle C 30 U Linear axes dynamic version 6-fold rotary union Blown air through the center of the spindle Automatic cabin door Rotating transparent window - 1x Kuka KR 180 R2900 prime 6 axes Load capacity: 180 kg Reach: 2,896 mm 66x spaces for workpiece pallets 2x changing places 1x turning station 8x gripper spaces - incl. 1x Schunk gripper - incl. 66x workpiece pallets - incl. 64x HSK 63 holders - incl. 20x collets Also available as a single machine Hermle C 30 U.

Condition: good (used), Year of construction: 2004, operating hours: 77,711 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Heidenhain iTNC530, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine ON: 77,711 h | Spindle ON: 16,294 h - Spindle HSK-A63, 10,000 rpm - 32 tool positions - Rotary table SRT 280 mm with integrated clamping system SK50 (can be closed off if not needed or converted for use as a zero-point clamping system) - External coolant supply - Internal coolant supply with 80 bar paper band filter - Chip flushing gun - Chip conveyor - Handheld control module - Automatic cabin door - 32 tool positions plus 87 additional positions (ZM87) - Thermal compensation - BLUM tool measurement (probe on machine column) - Renishaw measuring probe Dwjdpfx Aexcp R Ieb Tof - Chip container - Status beacon The machine has been thoroughly inspected; a geometry protocol and circularity test measurements are available. The machine can be viewed and tested under power at any time. Very well-maintained condition.