Tool milling machine

HERMLE C 600 V

Condition: good (used), Year of construction: 2001, Description: Fodpfx Aez Imtbsl Aogh The machine is in good technical condition and can be tested upon prior arrangement. The machine is fully functional and is equipped with a new roofing. It does not include a probe, clamping devices, or tools.

Condition: good (used), Year of construction: 1996, functionality: fully functional, Work area: 800x600x500 Rapid traverse rate: 30 m/min Fgodpfx Alozv Syfj Aeh Spindle speed: 15000 RPM, SK40 NC rotary table, diameter = 280 mm Electronic handwheel module Electrical thermal expansion compensation Ethernet interface, TNC 426/430 Measuring probe system, SK40, Renishaw Chip conveyor without chip cart Enclosed cabin roof section Air blow-off device, C800 The spindle was replaced in May 2018 with a total operating time of 25,185 hours. The current operating time is 31,083 hours. This means that the spindle has been in operation for 5,898 hours since its replacement.

Condition: used, HERMLE C 600 V is a 3-axis machining center, engineered for precision, high accuracy and reliability. Table 800×465 mm, travels X 600 / Y 450 / Z 450 mm, table load max 200 kg; tool changer 30 stations, spindle taper HSK‑A63. Spindle 20–16,000 min⁻¹, spindle power 15 / 10 kW; feed 1–30,000 mm/min, rapid 35 m/min, max feed force 6000 N. Supply 3×400 V 50 Hz, total power 35 kVA, weight ≈6800 kg, size 2500×2020×2750 mm, noise 78 dB(A). Coolant through spindle 40 bar. Achieves tight tolerances; typical sectors: automotive, aerospace, medical, watchmaking, tooling. Fodpozuwdasfx Al Aegh

Condition: ready for operation (used), Year of construction: 1999, operating hours: 20,132 h, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, table width: 465 mm, table length: 800 mm, table load: 200 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HERMLE C600V was manufactured in 1999. It features a fully enclosed design with dual front sliding doors and an ergonomic tool changer system. The machine is equipped with a HEIDENHAIN control unit, ensuring precision and reliability. If you are looking to get high-quality machining capabilities, consider the HERMLE C600V vertical machining centre we have for sale. Contact us for further details. Fedpsy T Htkefx Al Aegh - Control On: 48,840 hours- Machine On: 48,303 hours- Program Run: 19,244 hours- Drive On: 42,175 hours- Axes in Motion: 19,519 hours- Tool Magazine 1-10: 58 hours- Tool Magazine 11-20: 622 hours- Tool Magazine 21-30: 40,269 hours- Current Axis Coordinates: X = -236.820, Y = +421.759, Z = +186.835- Enclosure Style: Fully enclosed with dual front sliding doors and red ergonomic handles- Electrical Supply Connection: Overhead industrial power sockets (METEENCE units visible: 2x blue 230V outlets, 3x red 400V CEE industrial outlets)- Tool Changer System: Chain/pocket style automatic tool changer visible via top rear access panel- what is not included: clamping device, probe- the machine is equipped with the necessary mount for a Heidenhain probe- a software update was performed on the Hermle machine just this year Technical Specification Taper Size SK 40 Through-spindle Coolant No

Condition: used, Year of construction: 2013, x-travel 635 mm y-travel 510 mm z-travel 460 mm control Sinumerik 840 D SL Siemens turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 83 / 57 Nm tension force 8 kN table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - distance 100 mm T-slot - width 4x 14H12 / 1x 14H7 mm max. table load 600 kg table height over floor 720 mm distance spindle nose and table 120 - 580 mm number of toolpositions 30 pos. Max. mould width 80 / (130) mm max. tool length 250 mm max. tool weight 6 kg max. total weight 80 kg change-time tool to tool 1,6 sec change-time chip to chip 6,0 sec rapid traverse 30 m/min feed speeds 1 - 20.000 mm/min Fsdpfx Aleym Dz Ro Ajgh Feed force max. 5 kN total power requirement 28 kVA weight of the machine ca. 3,8 t dimensions of the machine ca. 3,5 x 4,0 x 2,7 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 635 V New Design - ShopMill - WITHOUT perforated plate - WITHOUT clamping device - WITHOUT tools

Condition: ready for operation (used), Year of construction: 1999, operating hours: 26,863 h, functionality: fully functional, machine/vehicle number: 12803, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller model: HEIDENHAIN TNC 430, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Bidding constitutes an obligation for timely collection between 01.12.2025 and 05.12.2025! TECHNICAL DETAILS Travels Travel X: 600 mm Travel Y: 450 mm Travel Z: 450 mm Feed range in X: 1–2,000/3,0000 mm/min Feed range in Y: 1–2,000/3,0000 mm/min Feed range in Z: 1–2,000/3,0000 mm/min Rapid traverse in X axis: 35 m/min Rapid traverse in Y axis: 35 m/min Rapid traverse in Z axis: 35 m/min Clamping table surface: 800 x 465 mm Max. spindle speed: 12,000 rpm Measuring system resolution: 0.1 µm Input unit measuring system: 0.1 µm Display increment measuring system: 0.1 µm MACHINE DETAILS CNC control: HEIDENHAIN TNC 430 Fsdpsxnkfkofx Al Ajgh Dimensions & Weight Dimensions (L x W x H): 2800 x 2100 x 2700 mm Weight: 6,700 kg Operating hours Spindle hours: 26,863 h CNC controller operation hours: 81,084 h EQUIPMENT Individual feed motors for each axis – three-phase (brushless) Note: The clamping devices (vices, chucks, etc.) mounted on the worktable are not included in the scope of sale or delivery. The machine is offered without tool holders and tools.

Condition: new, power: 17 kW (23.11 HP), travel distance X-axis: 1,050 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 640 mm, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, overall weight: 7,500 kg, table length: 1,150 mm, table width: 550 mm, controller model: TNC 7, coolant supply: 20 bar, rapid traverse Z-axis: 32,000 m/min, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rotational speed (max.): 15,000 rpm, spindle nose: SK 40 BIG PLUS (BVD 40), tool diameter: 150 mm, tool length: 300 mm, tool weight: 8 g, Equipment: CE marking, chip conveyor, documentation/manual, rotational speed infinitely variable, LAGUN L1050 Machining Center – available for short-term delivery The LAGUN L1050 machining center with a cross table design stands for high precision, robust construction, and economical production. Ideal for mechanical engineering, mold making, and contract manufacturing, as well as for a wide range of demanding machining tasks. Your advantages at a glance: ✔ Delivery and commissioning by JMT technicians Fsdpfjhy Ar Tex Al Aegh ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel ✔ 24-month warranty Technical equipment: Control system: • HEIDENHAIN TNC 7 basic digital control • HEIDENHAIN 16" TFT screen • HEIDENHAIN motors and measuring systems • HEIDENHAIN electronic handwheel HR 510 Including the following accessories: ✔ Longitudinal scraper conveyor ✔ Preparation for the integration of a rotary table ✔ Complete enclosure with side-opening viewing windows ✔ Ergonomic L-shaped control panel Accuracy: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Contact us – we will be happy to advise you and prepare a customized offer for you.

Condition: good (used), Year of construction: 2011, operating hours: 19,000 h, functionality: fully functional, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 19,000 h, spindle nose: HSK 63, number of slots in tool magazine: 32, Equipment: chip conveyor, documentation/manual, The machine will be available starting October 2026! Fgsdpfx Aozx Ur Nsl Ash

Condition: ready for operation (used), Year of construction: 2025, operating hours: 1,351 h, controller manufacturer: FANUC, controller model: i Series iPlus, This 6-axis DN Solutions DNX 2100S Advanced was manufactured in 2025. It features a FANUC i-Series control, a 6-axis configuration including B and C axes, and a tool magazine with 60 positions. The machine offers full turn-mill capabilities, through-spindle coolant up to 70 bar, and a Renishaw probing system. Consider the opportunity to buy this DN Solutions DNX 2100S turn-mill centre. Contact us for more information about this machine. • Axes Configuration: 6 axes (X, Y, Z, B, C1, C2) • B-axis milling spindle (indexing accuracy 0.0001°) • Milling/Main Spindle: • Tool Interface: HSK-C63 • Max Speed: 12000 rpm • Power: 18.5 / 15 kW • Max Torque: 58 Nm • B-axis Travel: 240° (±120°) • Left Spindle: • Chuck Size: Ø255 mm (10") • Max Speed: 4000 rpm • Power: 22 / 15 kW • Max Torque: 456 Nm Fjdpfx Alszv Ruus Aegh • Right (Sub) Spindle: • Chuck Size: Ø210 mm (8") • Max Speed: 5000 rpm • Power: 18.5 / 15 kW • Max Torque: 326 Nm • Tool Magazine: 60 positions • Features: Driven tools, Full turn-mill capability • Through-Spindle Coolant: 70 bar • Programmable Coolant Pressure (7 steps) • Coolant Through Opposite Spindle • Oil Skimmer • Chuck Washing • Work Area Washing: 4.5 bar • Coolant Level and Pressure Monitoring • Oil Mist Collector Preparation • Hinged Belt Chip Conveyor • Renishaw Probing System (Measuring Head Included) • Automatic Tool Measurement • Radio Tool Measurement System RMP60 • Manual Pulse Generator (MPG) • 3-Color Signal Tower

Condition: used, x-travel . mm y-travel . mm z-travel . mm Control . type . spindle speed: . spindle taper . surface area . mm Rotary table . mm Table load . kg b-axis . ° c-axis . 0 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are Fedpfx Alsyqtdce Ajgh possible by appointment. We look forward to your visit. Your Markus Hirsch Team