Used Heating System for sale (43,938)

Condition: excellent (used), Year of construction: 1995, heating capacity: 200 kW (271.92 HP), We offer a heating system from the renowned Austrian company BINDER. Boiler with a heating output of 200 kW Itedpfx Asxalfisa Esi TYPE RRK 150 Stove for biomass, bark, wood chips, and sawdust. Complete set with pumps and valves

Condition: used, Year of construction: 2009, heating capacity: 400 kW (543.85 HP), We offer a biomass boiler from the renowned company Kohlbach. Biomass boiler 400 kW Itedpfx Aaex Daw Ue Eji TYPE K 8 – 400 Biomass boiler for bark, wood chips, and sawdust. Complete pump and valve set. Multicyclone Fuel feed Heat exchanger from 2009 Optional and available at extra cost: Biomass boiler with movable floor and hydraulic pump

Condition: good (used), Year of construction: 2002, operating hours: 123 h, functionality: unexamined, heating capacity: 350 kW (475.87 HP), Mawera Type FU350RIA, fully automatic wood-fired boiler, bottom-feed firing, output: 350 kW. Hot water system, maximum flow temperature 95°C. Year of manufacture: 2002. Parts: boiler body: combustion chamber and heat exchanger, automatic feed screw, multi-cyclone, flue gas fan with piping to the chimney, operating instructions, Logic control system. Already disassembled. Viewing: possible by appointment in Budapest. Itedpewa Ax Aefx Aa Eji

Year of construction: 2013, condition: ready for operation (used), Technical details on demand. Itsdog Uwx Rspfx Aa Eoi

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, power: 350 kW (475.87 HP), Heating system, heating, chip heating Manufacturer Endress Type USF-W 350 Itsdex E Auzjpfx Aa Esi Output 350 kW Year of manufacture 2010 with feed with ash discharge with control

Condition: excellent (used), functionality: fully functional, total length: 1,950 mm, total width: 1,500 mm, total height: 1,500 mm, Selling here a heat recovery system for compressed air systems. Original Atlas Copco. WRG system for compressor. Dismantled due to insufficient compressor performance. Was hardly used :( Atlas Copco ER90 energy recovery unit - details attached as PDF. For water-cooled oil-free ZR compressor Turn your water-cooled, oil-free ZR compressor into an energy source for hot water with ER, our energy recovery unit. Power: 90 kw Special equipment: Reserve water pump - redundancy 2nd heat exchanger - Very good condition. Iedpfx Aop N H Huja Esti Hardly ever used - poor planning! Unfortunately no documents available.

Condition: new, - NEW -without side panel and without baseKanuk® Originalwarm air stove- combustion chamber opening H x W (cm): 31 x 31- flue pipe connection:top / rear- efficiency (%): 83.9- log length (cm): 48- minimum flue draught (Pa): 16- ash box: no- BimSchV stage 2: yes- lignite briquette: no- CE mark: Yes- Total power (kW): 17,7- Room heating capacity (m³): 540- Viewing pane (cm): 24 x 14- Weight (kg): 153- Wood consumption (kg/h): 4,2- Flue gas throttle: No- Type 1 (self-closing door): Optional- Logs, wood briquettes: Yes- AT §15a B-VG standard: Yes- Outside air connection (mm): 80 mm- Dimensions H x W x D (cm): 80 / 58 / 95- Flue pipe connection (mm): 160- Door diameter (cm): 28- Flue gas temperature (°C): 232- Flue gas mass flow (g/s): 14.28- Combustion chamber H x W x D (cm): 40 x 44 x 49.5- Pane flushing: Yes- DIN EN number: 13240- Primary, secondary, tertiary air: Yes- LRV Switzerland: YesNo. 2100108 Itedpfx Aevyd Awea Eoi

Condition: used, This listing is for 1 of 2 Ortho Biovue System Heat block-32 Isdpfexzh Rkex Aa Ejti

Condition: used, Year of construction: 1995, functionality: fully functional, Technical condition: Electrical system retrofitted in 2006. Technical details: Control system: Siemens S-5, line control: CP Line Materials processed to date: PE, LLD, PP, PUR Screw diameter: 1 x 80 / 1 x 45 mm Screw length: 24 D Minimum cable diameter: 2 mm Maximum cable diameter: 22 mm Maximum speed: 280 m/min Injection head: included Injection head manufacturer: Erocab Operating voltage: 3x400 V Frequency: 50 Hz Control voltage: 24/230 V Electrical cabinet: included Diameter measuring device: included Ijdpfxezf A Nps Aa Esti Plasticizer: included Unwinder: included Rewinder: included Caterpillar, belt, and disc take-offs: included Extruder: included Number of extruders: 2 Cooling trough: included Dancer/accumulator: included Installation length: 70 m Consisting of: ITAL SPA/1250 unwinder NOKIA-MAILLEFER JF 18 unwinder NOKIA-MAILLEFER NMB 80-24D extruder NOKIA-MAILLEFER NMC 45-24D co-extruder NOKIA-MAILLEFER U4A caterpillar ITAL VRR/3-600-63 cooling line ITAL ACO 350 accumulator ZUMBACH DSt.28A.30.KE40-RS spark tester ZUMBACH ODAC 34XY diameter measuring device (hot) Color mixer CAPnet meter counter MAILLEFER caterpillar ZUMBACH ODAC 34XY-Jn-F diameter measuring device (cold) ITAL ACV/350-4.5 dancer Drum flange diameter max: 1200 mm NOKIA-MAILLEFER Bobinoir JF22 rewinder Drum flange diameter max: 2200 mm MAILLEFER JB dancer KBA-Metronic GmbH alphajet printer KBA-Metronic GmbH alphajet printer CAPnet CHA 20 40 caterpillar take-off for accumulator

Condition: good (used), axle configuration: 3 axles, first registration: 03/2021, loading space length: 13,600 mm, loading space width: 2,460 mm, loading space height: 2,830 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,050 mm, suspension: air, tire size: 385/55R22,5, color: other, Year of construction: 2021, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Tare weight: 8070 kg, Gross vehicle weight: 43000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air suspension, ABS, EBS, Body construction year: 2021, Axle type: SAF, MEGA DOUBLE DECK // HARD WOOD FLOOR // SAF DISC BRAKES / LIFTING AXLE = Further Information = General Information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual gearbox Axle Configuration Tire size: 385/55R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lifting axle; Tire tread depth left: 6 mm; Tire tread depth right: 4 mm Axle 2: Tire tread depth left: 12 mm; Tire tread depth right: 11 mm Axle 3: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Weights Tare weight: 8,070 kg Payload: 34,930 kg GVW: 43,000 kg Environment Emission class: Euro 0 Condition Technical condition: good Optical condition: good Damage: none Financial Information Leasing price: 335 € per month (default, 60 months); Ask for more information and conditions = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of construction and price ranges. Itodpfxey Irnvj Aa Eji Why buy from Kleyn Trucks? It's simple! • Large and rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: excellent (used), axle configuration: 3 axles, first registration: 08/2026, loading space length: 13,700 mm, loading space width: 2,500 mm, loading space height: 2,780 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55R22,5, wheelbase: 8,790 mm, color: other, Year of construction: 2026, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Tail lift = Notes = Number of axles: 3, Payload: 30950 kg, Tare weight: 8050 kg, Gross weight: 39000 kg, Type of chassis: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body construction year: 2026, Axle type: SAF, Tail lift, Tail lift design: under-folding tail lift, Tail lift load capacity: 2000 kg, Tail lift manufacturer: Dhollandia, Tail lift material: Steel and aluminum, Tail lift size: 240x170, Battery for ramp, TAILLIFT 2,000 KG 3x 9 TON SAF AXLES DISC BRAKES = Additional Information = General Information Cab: Day cab Registration number: OX-74-GS Powertrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 385/55R22.5 Brakes: Disc brakes Isdpfxozk Un Ue Aa Esti Suspension: Air suspension Axle 1: Lift axle; Tire tread depth left: 14 mm; Tire tread depth right: 14 mm Axle 2: Tire tread depth left: 14 mm; Tire tread depth right: 14 mm Axle 3: Lift axle; Tire tread depth left: 14 mm; Tire tread depth right: 14 mm Weights Tare weight: 8,050 kg Payload: 30,950 kg GVW: 39,000 kg Functional Tail lift: Dhollandia, under-run, 2000 kg Environmental Emission class: Euro 0 Condition Technical condition: very good Optical condition: very good Damage: none = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here, you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various production years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • Good price • Correct business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: repair required (used), Year of construction: 1998, Max. tool size: 1,600 x 1,300 x 1,700 mm Max. table load: 17 tons Clamping force: 1500 kN Ijdpfx Aaezkigrs Esti Opening force: 750 kN Drive power: 25 kW Machine weight: approx. 30 tons

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 09/2017, loading space length: 135,000 mm, loading space width: 24,800 mm, loading space height: 27,000 mm, total length: 13,820 mm, total width: 2,550 mm, total height: 4,000 mm, wheelbase: 8,910 mm, color: white, Year of construction: 2017, Equipment: tail-lift, = Additional options and accessories = - Air suspension Iodpfxjy Ipw Ij Aa Eoti = Further information = Rear axle 1: Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg; Steerable Unladen weight: 8,420 kg Payload: 21,580 kg GVW: 30,000 kg Tail lift: D'HOLLANDIA DHLM.30, rear door, 2,000 kg Technical condition: good Visual condition: good Registration number: OP-65-YR

Condition: used, Year of construction: 2005, functionality: fully functional, total width: 6,300 mm, total height: 2,100 mm, total length: 20,000 mm, working width: 2,600 mm, input voltage: 380 V, type of input current: three-phase, roll width: 2,600 mm, roller length: 7,600 mm, We offer this ready-to-use ICO SYSTEM reactive PUR hot melt press, model ICO SYSTEM, manufactured in 2005. ICO SYSTEM reactive PU hot melt press line – 2,600 × 7,000 mm For sale: complete industrial reactive PU hot melt press line for single-sided bonding of large sheet materials. This robust production line from ICO SYSTEM International Coating GmbH has been successfully used for years by TABB Interior Systems BV for the production of high-quality laminated sheet materials. The installation is in excellent technical condition, is fully operational, and can be put into production immediately. Itsdpfezlh Auox Aa Eei Key features: Reactive PUR hot melt bonding Maximum panel size: 2,600 × 7,000 mm Suitable for single-sided bonding Year of manufacture: approx. 2005 Fully functional and well-maintained PLC control with touchscreen Automatic vacuum portal for precise panel positioning Throughfeed system for controlled curing and constant pressing force Roller conveyors and transport tables included Suitable for: The installation is suitable for bonding a variety of flat sheet materials, including: plywood MDF HDF particleboard HPL composite panels aluminum and steel sheets various other industrial sheet materials. Production process The line is designed for an efficient and reproducible production process: positioning of the bottom sheet application of reactive PUR hot melt automatic placement of the top sheet using a vacuum portal passage through the heated press controlled curing and output of the finished product. Thanks to the automatic handling, large panels are produced quickly, accurately, and with consistent adhesive quality. Scope of supply The complete installation includes, among other things: ICO SYSTEM heated throughfeed system automatic vacuum portal with suction cups conveyor belts and roller conveyors control cabinet with PLC/HMI complete steel structure and handling. Condition The machine is fully operational, is still in use in production, and is available only due to a change in the production process. Inspection while running is possible by appointment. Interested? Please contact us for additional information, technical specifications, a demonstration, or an inspection. This high-quality industrial press line is ideally suited for companies that want to efficiently bond large sheet materials with a high-quality PUR hot melt bond.

Year of construction: 2002, condition: good (used), functionality: fully functional, Full automatic pack infeed to Moulder Speed up to 120 M/Min Complete with manuals Automatic board turner. Itjdpfx Aajzlbibo Eoi single board feeding system Min/Max length 820mm/5400mm

Condition: used, Year of construction: 2016, Overview This tray former and case sealer packaging module was manufactured in 2016 by Denmark SOCO SYSTEM A/S. The system consists of an automatic tray former and a case sealer designed for fully automated carton handling in packaging lines. The tray former erects flat carton blanks into trays, which are transferred via conveyor to downstream processes, while the case sealer applies self-adhesive tape to close cartons after filling. Technical data  - Capacity: 12 – 14 cycles/min (tray former) Iedpfx Aasyxxxvs Eoti - Application: Carton forming and sealing - Configuration: Automatic tray former with pneumatic forming system and automatic case sealer with tape sealing - Utilities: - Voltage: 3 × 400 V - Frequency: 50 / 60 Hz (tray former), 50 Hz (case sealer) - Air consumption: approx. 31.3 Nl/cycle (tray former), approx. 0.6 Nl/cycle (case sealer) - Air pressure: 0.6 – 1.0 MPa - Rated current: 2 A (tray former), 3 A (case sealer) Scope of Delivery  - Tray former | SOCO SYSTEM A/S | BE 2200 ATS R | 2016 | Automatic tray former with pneumatic forming system and HMI control - Case sealer | SOCO SYSTEM A/S | T-402 | 2016 | Automatic tape case sealer with conveyor integration

Condition: used, Year of construction: 2012, Overview  This complete brewhouse was manufactured in 2012 and enables the production of 1,000-liter brews. The system works with steam and includes brewing, fermentation and storage tanks. It is immediately available and is currently installed and ready for operation in the production facility. The seller confirms that the system has worked perfectly until recently. The boilers have a copper coating, while the rest of the system is made of stainless steel. Details - Wort yield: 1,000 liters per brew - Heating system: Steam - Current status: Installed and ready for operation - Availability: Immediately Scope of delivery  Itjdev Da Dljpfx Aa Esi - Brewhouse | Mini Brewery System | CI T 10 | 2012 - 2 kettles (mash tun above the whirlpool as one unit + separate boiling kettle) - Steam boiler | Mini Brewery System | - | 2012 (electric) - Plate heat exchanger - Hot water tank | 1,500 L - Reverse osmosis system | ALFA | compact model | - - Capacity: 150-200 L/h - 4x Isobaric fermenter | Mini Brewery System | 1,000L | 2012 - 4x Horizontal isobaric maturation tank | DuoTank | 500 L | 2018 - Cooling jacket & bag system for optimum beer preservation

Condition: used, table length 2400 mm table width 1200 mm table height 200 mm bore 28 mm 100 x 100 mm material thickness ca. 24,5 - 27 mm 200 mm work height max. 850 mm Iodpfx Aozh N Udea Eoti Weight 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >. - high-quality steel S355J2+N + plasma nitriding - Drill holes in side panel in diagonal grid - Corners, edges and drill holes bevelled 45 - Construction reinforced by ribs - incl. base basic equipment 650 mm

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: AK2-SCBS201, input current: 230 A, For sale is a used ELS labeler/labeling station with a conveyor belt. The machine was acquired by us after we installed our own labeling system on our thermoforming packaging machine. The labeler was subsequently completely overhauled and tested for functionality. The system is mounted on a sturdy stainless steel/aluminum frame and features an integrated conveyor belt. The photos show labeling heads, roll holder, control panels, sensors, and mechanical adjustment options for adapting to different products or packaging. Data / Features: Manufacturer: ELS Type / Designation according to nameplate: AK2-SCBS201 Machine no. according to nameplate: 16615 / 2024 Labeling station with conveyor belt Height and position adjustment Stainless steel / aluminum construction Control panels on the labeling head Sensors included Completely overhauled Function tested Condition: used, ready for operation The machine is suitable for use in packaging lines, e.g., for labeling packaged products, trays, boxes, or similar items. Before use, the system should be adjusted to the specific product and adapted to the corresponding label format. Isdpfx Aajzkucfs Eoti Note: Technical data such as label width, label length, belt width, connection values, and exact dimensions can be requested separately if needed or checked on-site. Inspection and testing possible by appointment. Errors and prior sale excepted.

Condition: excellent (used), Year of construction: 2001, OR PT 1000 AP SYSTEM Year: 2001 Itedpfozktv Dex Aa Esi Air Blower Maximum Paper Size: 74 x 104 cm Minimum Paper Size: 29 x 42 cm Maximum Pallet Weight: 1000 kg Maximum Opening: 1380 mm

Year of construction: 2019, condition: used, functionality: fully functional, Approximately 250 pieces in stock. Itedoy Uc Sfspfx Aa Eei Price per piece: 100 Euros. A mix of used and new items.

Condition: used, Aging machine, brushing machine QuickWood 1/26 Itodpszkh E Tjfx Aa Eoi

Condition: good (used), Curved roller conveyor, curved track, curved roller conveyor, curved roller conveyor, curved roller conveyor, roller curve, curved conveyor with drive, roller track, roller curve conveyor, roller track, conveyor track, lightweight roller conveyor -Manufacturer: Soco System, non-driven roller curve conveyor, height-adjustable -Height: max. 710 mm -Rollers: Ø 48 x 15 mm -Number: 2x roller conveyor available -Price: per piece Iodpfxeyw Hwko Aa Ejti -Transport dimensions: 1470/600/H510 mm -Weight: 23 kg/pc.

Condition: good (used), Curved roller conveyor, curved track, curved roller conveyor, curved roller conveyor, curved roller conveyor, roller curve, curved conveyor with drive, roller track, roller curve conveyor, roller track, conveyor track -Manufacturer: Soco System, roller curve conveyor with drive, height adjustable -Rollers: Ø 54-80 x 355 mm -Speed: 14 m/min Iedpfx Aaeywu Azj Eoti -Drive: 2x 0.12 kW, see photo of nameplate -Transport dimensions: 1500/600/H840 mm -Weight: 64 kg

Year of construction: 1991, condition: good (used), Carton sealer, packaging machine, carton closing machine, carton sealing machine, sealing tape machine, adhesive tape machine -Manufacturer: Soco System, Carton Sealer Type T-10 -Carton width: max. 530 mm Iedjlry S Ajpfx Aa Eoti -Dimensions: see photos -Overall dimensions: 980/930/H1680 mm -Weight: 135 kg