Used Hate for sale (17)

Condition: excellent (used), Year of construction: 1985, max. working width: 3050 mm for sheet metal (at 45 kg tensile strength) up to: 6 mm clear gap between uprights: 3400 mm cutting angle adjustable by hand: 0.5 - 3° number of hydraulic hold-downs: 18 stroke rate approx.: 9 - 17 /min gauge adjustment: 1000 mm hydraulic drive: 380 V, 7.5 kW required space incl. back gauge: 3600 x 1800 x 1580 mm weight: 5200 kg Dedpoxrp Thjfx Adajkk

Condition: ready for operation (used), working width: 3000 mm metal sheet thickness: 4 mm Dkodpfx Adjh D E Hhjajk throat: 100 mm rear stop: 500 mm power: 380 V, 7,5 kW space needed: 3400 x 1600 x 1700 mm weight: 4500 kg

Condition: used, Machine not operational – control system not running Special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Serial No. 300487 Year of manufacture: 2006 Pressing force: 500 tons Column gap front and rear: 2520 mm Table surface: 2500 x 2500 mm Ram surface: 2500 x 2500 mm Ram stroke: 600 mm Installation height max.: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable approach speed: 100-800 mm/s Pressurization to 5000 kN: approx. 0.7 sec. Return speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-position flat guide for the ram - Hydraulic ram locking at TDC Dsdpfodzqptjx Adaokk - Freestanding control cabinet (200 x 50 cm) - Siemens PLC control S7-314 - Operation via Siemens OP 170-B (5.7”) - Two-hand control desk, freestanding - Floor-level installation - Table plate 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication - Operating manual with circuit diagrams Required space (L x W x H): 372 x 260 x 460 cm Required space for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: ready for operation (used), A Moving Die Rheometer Alpha for rheological testing and vulcanization analysis of rubber compounds is available. Test standards: ASTM D5289/ISO6502, max. temperature: 200°C, frequency: 1667Hz, strain: 0.2°/0.5°, test pressure: 8000kPa. Machine dimensions X/Y/Z: approx. 800mm/700mm/1350mm, weight: approx. 200kg. Without software. Documentation available. An on-site inspection is possible. Dedpjxruklefx Adajkk

Condition: ready for operation (used), Year of construction: 2019, A Hanwha Techwin collaborative robot is available. Axes: 6, reach: 915mm, payload: 5kg, repeatability: +/-0.1mm, collision detection: 25Nm-150Nm, weight: 21kg. Including platform (dimensions X/Y/Z: 780mm/700mm/910mm), suction pad, control unit and original packaging. Documentation available. On-site inspection is possible. Djdpfjup Ehvjx Adajkk

Condition: ready for operation (used), An Alpha rubber process analyzer for testing the rheological and dynamic properties of elastomers and rubber compounds is available. Frequency range: 0.1-3000cpm, max. temperature: 230°C, max. heating rate: 1°C/s, max. cooling rate: 0.5°C/s, max. strain: +/-90°, test standards: ASTM D5289/D6048/D6204/D6601/D7050/D7605/D8059. Machine dimensions X/Y/Z: approx. 800mm/700mm/1350mm, weight: approx. 200kg. Including PC with Eclipse software and spare parts. Documentation available. On-site inspection possible. Djdpfx Adsxrukxeajkk

Condition: ready for operation (used), An Alpha viscometer for testing raw elastomers and rubber compounds is available. Test standards: ASTM D1646/D3346, max. temperature: 200°C, rotational speed: 2rpm. Machine dimensions X/Y/Z: approx. 800mm/700mm/1350mm, weight: approx. 200kg. Without software. Documentation available. An on-site inspection is possible. Dkodpfxoxrukro Adajk

Year of construction: 2025, condition: new, Stock No. 2846 Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling Dkedpfed Hqa Isx Adask 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Dkjdsi Dtbiopfx Adask Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant. Trail-run with your material-mix possible, darte and details uopn request.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, Stock No. 2846 Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement Dkodpfx Asi Dtbuodaek

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, Stock No. 2846 Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Dsdpfx Aji Dtb Aedaekk Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Condition: new, Year of construction: 2025, operating hours: 2,846 h, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Screw diameter 73 mm Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Dkodpfx Adji Dtbqjask Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant.

Condition: good (used), SERVO - Bar Loading Magazine HATEC AM 90 - Diameter range: 4 - 65mm - Length range: 100 - 1270mm - Work head feed: 1300mm - Total power requirement: 1KW - Drive: SERVO drive - Control: CNC - Max. bar weight: 40kg - Various feed bars - DOCUMENTATION Dimensions: LxWxH 1.6 x 1.1 x 1.3 meters / Weight: 250kg Dkjdpjx Dl Ifjfx Adaek Errors and omissions excepted.

Condition: used, Year of construction: 1968, functionality: fully functional, machine/vehicle number: M32L/8711, Offer Number: M32L/8711 Machinetype: hot nut former Make: HATEBUR Type: AMP30 Constr. year: 1968 diameter range: 64 mm max. width across flats: 56 mm max. outside dia. of round pieces: 64 mm bar dia.: 18-40 mm cutting length: 20-72 mm Dkjdpfxswi Suxe Adask output - pieces/min: 140 number of forming stations: 3 press power: 230 t Location: In our warehouse

Condition: refurbished (used), Available rubber testing equipment Dkjdpfjwmnlhjx Adask 1 x Alpha Production MDR Rheometer (optionally in container with pneumatic sample punch) The device has been inspected, calibrated, and equipped with new software on a new tower PC!

Condition: used, Year of construction: 1984, plate width 3100 mm plate thickness 6 mm distance between columns 3150 mm no. of strokes 20 - 75 Hub/min cutting angle 0,5 - 1,25 ° Dkodpfxotv Ihqj Adaek down holder 16 Stück voltage 380 V frequency 50 Hz power capacity 10 kW weight of the machine ca. 6 t dimensions of the machine ca. 4,0 x 2,1 x 1,7 m with electr. back stop, 950 mm

Condition: used, mileage: 58,440 km, power: 125 kW (169.95 HP), first registration: 06/2023, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Subject to errors and prior sale! Internal number: 1165. PD23390 ----EQUIPMENT * Technology Package 10 – Heated windscreen, windscreen wipers with rain sensor – Front and rear parking pilot system, active emergency brake assistant (camera based) – Lane keeping assist with driver drowsiness warning and high beam assistant, including lane keeping assistant – Headlight assistant with day/night sensor – Cruise control – Reversing camera with rear path display in multifunction display – LED downlights – Fog lights * Radio: Ford Audio System with 4" multifunction display DAB/DAB+ – Connected radio (FM/AM) – Digital radio reception DAB/DAB+ (Digital Audio Broadcasting) – FordPass Connect – 4" TFT multifunction display (10.16 cm screen diagonal) – 4 speakers, antenna – integrated control panel and steering wheel audio remote control – Bluetooth, USB port and hands-free system – Emergency call assistant * Transmission: 6-speed manual gearbox * Anti-lock braking system with electronic brakeforce distribution (EBD), including – Electronic stability program (ESP) with traction control (TCS) – Hill start assist – Crosswind assistant – Safety brake assist – Rollover protection – Emergency brake support including emergency brake light * Driver's airbag * Exterior mirrors, electrically adjustable and heated - with integrated indicator lights * Battery: battery runtime, runtime programmable to 10 minutes * On-board computer with fuel consumption and mileage display (e.g. remaining range) as well as outside temperature and Ford ECOMode * High roof * Double rear doors with 256° opening angle (without window), no rear window, with hold magnets * Rev counter * Third brake light * Electric front windows with quick down/up function for driver’s side * Ford Easy Fuel – Comfort fuel cap and misfueling prevention system * High performance alternator * Headlights: Halogen dipped beam with daytime running lights * Lockable glove compartment * Interior lighting with delay and front reading lamps * Front air conditioning incl. dust and pollen filter * 70 l fuel tank * Paint: solid color paint * Cargo area lighting * Steering wheel: Artificial leather steering wheel * Steering column adjustable for height and reach * MyKey key system – individually programmable second key * Fog lights * Emergency call assistant * Particle filter: Diesel particulate filter * Sliding door entry light, automatic when door opens * Sliding door: right side * Rear mudflaps * Side protection strips * Power steering Dsdpfxsxngwvo Adaokk * Seatbelts – Front seatbelt tensioners and force limiters * Seats: Seat Package 13 – Driver’s seat, 4-way adjustable (fore/aft, backrest, seat cushion tilt, height) – Double passenger seat with storage compartment under separately folding seat cushions – Height adjustable headrests – Integrated tray in double passenger seat (foldable) – Driver’s inboard armrest – Manual lumbar support (driver’s seat) – Seat upholstery: fabric * Start-stop system * Partition (plastic) at the B-pillar height * Rear bumper with integrated step * Recirculation control * Lashing eyes * Immobilizer * Heat-insulating, lightly tinted glazing * Central locking with remote control * Overhead storage compartment in front ... and much more. ----The vehicle is not reconditioned! Nationwide delivery available at extra cost. Subject to errors and prior sale. We are happy to accept your vehicle as a trade-in. Financing available.