Used Guillotines for sale (911)

Condition: good (used), Year of construction: 1995, Max. cutting length 3050 mm Ijdpfx Ahevkw Dvoyobc Material thickness 37 kg/mm² 12 mm Material thickness 70 kg/mm² 8 mm Cutting angle 1.8 degrees Stroke rate 8 - 13 min. Number of hold-down clamps 12 Drive power 18.5 kW Dimensions L x W x H 4150 x 1950 x 1950 mm Weight 8000 kg Accessories / Special features: • ELGO Type 71 motorized NC positioning control for the backgauge, length approx. 900 mm • If necessary, the toggle lever system allows the machine to operate with only one cylinder at a reduced cutting capacity of approximately 55% of the nominal capacity. This simultaneously increases the cutting sequence for more efficient work with thin sheet metal. Switching from fast to slow is done using a selector switch on the control panel. • Hydro-mechanical drive via a powerful toggle lever • Easy cutting gap adjustment on both sides • 2 cylinders mounted externally on the machine, easily accessible • Vertical, stable guides • Upper and lower blades each with 4 cutting edges • Hydraulic overload protection • Proportional force of the hold-down clamps • The machine frame is a fully welded construction and is machined in one setup (no screwed parts) • Portable electric foot switch • Blades suitable for black sheet metal and stainless steel • Ball transfer units in the table • 1 angle stop • 1 support arm • CE-compliant Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1995, Technical details: sheet width: 3000 mm plate thickness: 12 mm distance between columns: 3500 mm control: Cybelec DNC 10 G back gauge: 1200 motorisch mm cutting angle: 1,2 - 2,73 ° cutting gap adjustment: ja mm cutting capacity : 66.000 daN daN Ibodpfx Ahovc Amteysc Knife length: 3100 mm down holder: 17 Stück interface: RS232 Table dimensions: 3200 x 600 mm total connected load: 22 kW weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t space requirements approx. LxWxH: ca. 4,5 x 2,6 x 2,1 m transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m The guillotine shear was put into operation for the first time in 1998. The DNC 10 G control unit was specially designed for guillotine shears. It has a numerical axis for controlling the backgauge and automatically calculates and regulates the cutting gap, the cutting angle and the cutting depth, taking into account the material to be cut. (Data from the manufacturer) Table with side stopL:930 x W:105 x H:42 mm 2 table extensions L:1600 x W:100 x 83 mm Angle fence (attached to table extension) Operation via control panel with swivel arm and foot control Equipment: Drain with rollers for clippings 2x protective grid *

Condition: used, Year of construction: 1993, Technical details: sheet width: 3050 mm plate thickness: 6,0 mm distance between columns: 3460 mm no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm cutting angle: 0,5° - 3,0° ° Ibsdpju Rni Hsfx Ahyec cutting gap adjustment: manuell mm down holder: 18 Stück (hydraulisch) Stück Table dimensions: 380 x 3100 mm total connected load: 7,5 kW weight of the machine ca.: 4,56 t dimensions of machine: L: 3,64 x B: 2,55 x H: 1,58 m Equipment: With side stop L: 1000 × W: 100 × H: 60 mm and stop bar 990 mm, with 8 supports Operation via control panel and foot switch Cutting zone lighting Stroke counter Machine feet *

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 59600 € Ibjdpfxswiqxce Ahyoc 1126.44 € 3100 mm 10 mm 6 mm 50 mm 13 1/min 1.5 ° 16 22 to 1000 mm 200 mm/s 22 kW 200 l 2 Stk. 865 mm 580 mm 3515 mm 4200 mm 2250 mm 3600 mm 2100 mm 9300 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength for economic processing Lower blade fourfold turnable Upper blade double turnable Oilfilling Light barrier on the back of the machine Qualified customer support User manual in GERMAN and ENGLISH according to CE rules WE HAVE MORE THAN 850 REFERENCES!

Condition: used, functionality: fully functional, Sacma 3000x6 mechanical guillotine shear, motorized back gauge, throat depth 500 mm, dimensions: 390x195x200 (h) cm, weight: 9900 kg Ibedpfxewn Hfcj Ahysc

Condition: used, functionality: fully functional, OMAG Hydraulic Shear 3000 x 10, motorized back gauge, throat depth 200 mm, dimensions: 345 x 210 x 215 (h) cm, weight: 10,000 kg Iodpfxewvqkrj Ahyobc OMAG Hydraulic Shear 3000 x 4, motorized back gauge, throat depth 200 mm, dimensions: 340 x 135 x 150 (h) cm, weight: 4,000 kg

Condition: used, Year of construction: 1965, Technical details: sheet width: 1200 mm plate thickness: 1,0 mm throat of pillar: 1200 mm number of cutting strokes max.: 45 p.Min. Iedpfx Aheu Icppeyobc throat max.: 300 mm cutting gap adjustment: nein down holder: 5 Stück back gauge: ca. 500 manuell mm total power requirement: 2,2 kW weight of the machine ca.: 1,6 t dimension machine xH: 1,6 x 1,6 x 1,9 m further features: -with shear angle adjustment -operation via foot switch -voltage 380 V *

Condition: used, Year of construction: 1969, Technical details: sheet width: 2000 mm plate thickness: 1,5 mm distance between columns: 2100 mm table-size: 2150 x 450 mm height over floor: 850 mm knife length: 2100 mm down holder: ja mm back gauge: 460 manuell mm strokes per minute: ca. 50 Hübe/min cutting gap adjustment: ja cutting angle: nein total power requirement: ca. 5,5 kW weight of the machine ca.: ca. 3,0 t transport measurements machine: 2,7 x 1,6 x 1,8 m Further features: Ijdpfx Aheu Icp Asysbc - incl. Table extension (L: 1750 x W: 1000 mm) and adjustable limit stop - back gauge with linear scale, operation with hand crank i.D. *

Condition: good (used), functionality: fully functional, Year of construction: 1994, Used SCHRÖDER motorized guillotine shear, type MHSU, built in 1994, No. 121204 Usable length: 1030 mm Max. sheet thickness: 2.5 mm - Pneumatic hold-down device - Front support arms 1000 mm - Digital back gauge 750 mm Ijdpfxsv Tzpho Ahysbc - Right-angle stop - Sheet support device - Forward sheet slide - Rear area protection with protective cage - Foot switch The machine is in stock at our location in 71334 Waiblingen-Beinstein and is available immediately.

Condition: good (used), functionality: fully functional, Year of construction: 2000, sheet thickness steel (max.): 16 mm, back gauge: 1,000 mm, cutting length (max.): 3,150 mm, foot switch Ibedov Syyvjpfx Ahyec motorized arrester behind cutting angle adjustment Technische Daten / technical details: Schnittleistung / max. cutting capacity 16 mm max. Schnittlänge / max. cutting length 3150 mm Anschlag / limit stop 1000 mm Gewicht der Maschine / weight 16300 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), Year of construction: 2007, sheet width 3050 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm 8.00 mm down holder 10 Stück cutting angle 0°40 - 2°20 Grad 3340 mm work height max. 860 mm Isdpoxaaghjfx Ahyebc 575 mm Control GP 37W2 13 - 33 Number of working hours ca. 15.800 h 0 max. 315 bar oil volume 100 ltr. total power requirement 6.0 kW weight of the machine ca. 6030 + 1850 kg In good condition (!!) current new price including accessories approx. 110.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=3JUqSaaJkFQ Equipment: - Robust CNC electro-hydraulic guillotine shear - AMADA CNC touch control, front left ("GP 37W2") * Machine control including information display * Main display with 4 control panels * Control/operation of all functions * Max. 50 cutting programs with 15 sequences each - CNC electro-motorized backgauge * Travel speed 100 mm/sec. - CNC electro-hydraulic cutting angle adjustment - CNC electro-hydraulic cutting gap adjustment - Sighting device & cutting line illumination for viewing the scribe line * ??Shear cutting according to the optical scribe line - Manually adjustable table support plates, including ball transfer units * Grip recesses in the front support table - 2x freely movable foot switches - Operating instructions + circuit diagram SPECIAL ACCESSORIES included: - Backgauge system with 3 stations + separate control: * STATION 1 - AMADA conveyor belt with pneumatic sheet support device * STATION 2 - AMADA conveyor belt with pneumatic scrap deflector * STATION 3 - AMADA stacking device with scissor lift table device - Wooden box with spare knives - 1x AMADA extra-long side stop, with support foot * Length approx. 3.000 mm - 2x AMADA extra-long front support arms

Condition: new, sheet width 3100 mm plate thickness 6,0 mm distance between columns 3.100 mm down holder 14 Stück no. of strokes 16 - 24 Hub/min oil volume 150 ltr. cutting angle 0,5 - 1,5 ° thickness at "Niro-steel" 4,0 mm column arm 350 mm engine output 11,0 kW weight of the machine ca. 7.060 kg range L-W-H 4100 x 2200 x 2190 mm ----- electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment ----- Furnishing: Ibodpfsxaag Usx Ahyec - CNC guiding guillotine shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: new, Year of construction: 2025, For customers from: Lithuania, Latvia, Estonia. Equipment for straightening, longitudinal cutting, and shearing rolled metal is an integral attribute of companies working with sheet metal. The FORSTNER company, which has long-term experience in the production of rolled metal processing machines, currently offers the market not only conventional metal shearing machines, but also equipment that performs straightening, longitudinal cutting, and shearing functions. The shearing function is performed using disk or guillotine shears. Depending on your production goals and the tasks the equipment must perform, they can be divided into four groups: 1. shearing machines; 2. longitudinal cutting and shearing machines; 3. straightening and shearing machines; 4. straightening, longitudinal cutting, and shearing machines. The straightening and longitudinal cutting functions of certain models of longitudinal cutting machines can be automated, which allows you to quickly and conveniently change the parameters when starting to work with another material. Ibsdpowd E N Ejfx Ahyec Forstner EASY series equipment is a machine that cuts a sheet of metal of a set length with the help of a guillotine or circular shears. EASY CUT machines are equipped with circular shears that can cut steel up to 1.0 mm thick. If you need a machine that can cut thicker metal, then it is recommended to choose the EASY PRO model with a guillotine. The working width of the machines can be 1250 mm or 1500 mm. Forstner STRAIGHT. These machines, by pulling a set length of a sheet of metal, straighten it and cut it. Depending on the type of cross-cutting knife and the diameter of the straightening rollers, the thickness of the processed metal varies from 1 mm to 2 mm. STRAIGHT and POWERSTRAIGHT also differ in the adjustment of the straightening rollers: mechanical or automatic. Integrated automatic control saves time in the long term, because changing the operating parameters of the machine is enough to press one button. Automatic control is a great choice when working with many different materials. The Forstner SLIT series is a reliable assistant when cutting rolled metal. The SLIT CUT and SLIT PRO models not only cut the metal, but also cut it lengthwise into strips of the selected width. As standard, these models are equipped with 5 longitudinal cutting knives (the maximum number of knives is 7). The main difference between the SLIT CUT and SLIT PRO models is the type of cutting knife - a circular shear or a guillotine. The Forstner COMPACT series is a device that pulls the required length of material, flattens it, cuts it into strips of the desired width and cuts sheets of a set length. The main difference between the models is the type of knife used for cutting: a circular shear or a guillotine. The flattening rollers and longitudinal cutting knives are mechanically adjusted. POWER COMPACT is a powerful equipment for flattening, longitudinal cutting and shearing rolled metal. These two models differ in working width and cross-cutting metal thickness. NuSLIT machine models are fully automated equipment. If you are looking for an automatically controlled machine that performs longitudinal cutting and cutting functions, you should choose the nuSLIT PRO or nuSLIT PROCUT models. The difference between these two models is the type of cutting knife: guillotine or segmented disc shears. NuSLIT STRAIGHT PRO and nuSLIT STRAIGHT PROCUT, in addition to the above functions, also smooth the metal sheet.

Condition: used, Year of construction: 2002, gebraucht 2002 090129 prompt, Zwischenverkauf v Türkei 27800 € 1 3100 mm 10 mm 350 mm 10 1/min 1.5 ° 1000 mm 22 kW 3800 mm 3600 mm 2000 mm 9800 kg Swing cut construction NC-preselection system ENC100 for back gauge, cutting length and piece counter Motorized back gauge 1000 mm on ball screws, folding upwards Hydraulic hold down pistons Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Isdpsx Urrhsfx Ahysbc Oilfilling Light barrier on the back of the machine User manual in GERMAN with EC declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: new, IDEAL 1080 Krug & Priester Guillotine-style Cutting Machine Ideal 1038 cutting machine Work material knife, bevel angle 75° Ideal for cutting paper, cardboard, linoleum, plastic and metal films, thin sheets, and other materials Re-sharpenable knife set made of Solingen knife steel Complete with a solid base frame and foot pedal Fold-out side table, right Side guide with a scale in mm and inches Infinitely adjustable back guide with a locking screw Front guide with a locking screw and narrow-cut device Scale knob for precise adjustment of the front guide Printed DIN format scale from A3 to A6 Fixed, transparent knife guard made of shatterproof plastic and knife locking device Particularly stable knife bearing made of aluminum casting and double-mounted knife shaft for precise cuts Extremely robust metal construction GS tested safety mark Brand quality, Made in Germany Cutting length: 800 mm Cutting capacity: approx. 20 sheets (70 g/m² paper) - 4 mm clearance height Table size (W x D): 605 x 800 mm Dimensions (H x W x D): 1215 x 670 x 1080 mm Width with the side table folded out: 890 mm Weight: 55 kg Item condition: new ideal 1038 cutting machine Iedpfx Ajx R Scxshysbc You can find more cutting machines in other sizes – new and used – in our shop! International shipping costs available upon request!

Condition: new, functionality: fully functional, control type: CNC control, actuation type: hydraulic, controller manufacturer: Cybelec, controller model: Cybtouch 8, working width: 3,120 mm, sheet thickness (max.): 6 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, power: 11 kW (14.96 HP), control voltage: 480 V, total length: 3,840 mm, total width: 2,050 mm, total height: 1,700 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, Comparable to Durma, Baykal, Ermaksan Swing beam guillotine shear with fixed cutting angle Max. cutting length: 3120 mm Max. sheet thickness (at 450 N/mm2): 6 mm Cutting angle: 1.39 degrees Number of hold-downs: 15 units Motor power: 11 kW Cutting speed: 18 strokes/min Oil tank capacity: approx. 200 l Machine length: 3840 mm Machine width: 2050 mm Overall width: 2745 mm Machine height: 1700 mm Machine weight: 8800 kg Throat depth: 150 mm Standard equipment: CE safety equipment / conformity Maper control unit with memory function Manual central blade gap adjustment via handwheel Cutting length adjustment via control panel Ball transfer tables Motorized, programmable backgauge 1000 mm with ball screw drive Folding finger guard up to 1000 mm 1 piece 1000 mm stop arm with scale, T-slot, flip stop, ball bearings 2 pieces 1000 mm support arms with integrated ball bearings Cutting line illumination via shadow outline, LED lighting High-quality upper blades with 2 cutting edges High-quality lower blades with 4 cutting edges Option: CNC control Cybelec CybTouch 8 G The powerful addition to all types of high-quality guillotine shears. High-contrast touchscreen with vivid colors. Clear display with all information needed by the operator. Intuitive and user-friendly. Ijdexyxuqepfx Ahysbc Complete part programming in seconds. CNC blade gap adjustment Automatic blade gap adjustment after material data input via control panel

Condition: excellent (used), Year of construction: 2005, 191 USED Ciabatta dough divider, square dough, complete with Lippelt grain sprinkling machine. EQUIPMENT: - guillotine, - pattern cutter, - container for various grains, - dough soaker. Iedpfxexqy Uyj Ahysbc The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: used, NOVASTILMEC hydraulic press brake 3000X75, SYNCHRO series, 3 axes, 300 mm throat depth. Dimensions: 360x150x240 (h) cm, weight: 6200 kg. Ijdjylmklspfx Ahyebc

Condition: good (used), Year of construction: 2007, Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Manufacturer: Sauer Sundstrand, hydraulic unit from Atlantic ATS 3006 guillotine shear -Hydraulic pump: double version -Motor: EMI 7.5 kW / 1440 rpm Isdpfeyghunex Ahyebc -Dimensions: 790/330/H295 mm -Weight: 83.6 kg

Condition: new, Bernardo Hydraulic Guillotine Shear HST 1300 x 4 Technical Specifications Cutting length: 1300 mm Max. sheet thickness*: 4 mm Cutting angle: 2° Motorized backgauge: 0 – 700 mm Strokes / min: 16 Number of hold-downs: 1 pc. Table height: 850 mm Support arms: 3 pcs. Oil tank: 60 liters Motor power: 5.5 kW Length: 2070 mm Depth: 2040 mm Height: 1365 mm Weight: approx. 1,970 kg * Material strength 400 N/mm² Isdpfx Ahjyg Hwnsyjbc Features • Machines offer high reliability, safety, and cost-effectiveness • Sturdy welded steel construction ensures torsion-free operation • Precise working due to integrated cutting line illumination with shadow outline • High operator safety provided by protective guard and rear photoelectric sensors • Designed for efficient cutting of various materials, such as steel sheet, brass, aluminum, copper, etc. • Cutting via foot pedal allows hands-free sheet positioning • Front support arms for easy handling of large plates • Simple adjustment of the cutting gap via side-mounted lever • Table support surface with integrated rollers, ideal for large workpieces • Automatic hold-down for sheet fixing Scope of Delivery • Cutting gap adjustment • Cutting line illumination • Motorized NC backgauge • Front sheet supports • Table support surface with integrated rollers • Side stop • Safety guard with photo sensors • NC controller E21S • Foot pedal with emergency stop • Blades made of tool steel

Condition: used, Year of construction: 1982, sheet width - max. 1255 mm plate thickness 4.0 mm ST plate thickness 2.0 mm VA plate thickness 6.0 mm ALU number of strokes - loaded ~ 66 Hübe/min. cutting angle 1.5 ° back stop - adjustable max. ~ 1.000 mm Ibedpfjxaa I Sjx Ahysc total power requirement 5.5 kW weight of the machine ca. 2600 kg. range L-W-H 1750 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition (!!) Furnishing: - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation - manual cutting gap adjustment - 1x extra long side stop - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) * Machine link : ?machineno=1008-9325278

Condition: new, sheet width 3100 mm plate thickness 6,0 mm thickness at "Niro-steel" 4,0 mm down holder 14 Stück no. of strokes 20 Hub/min cutting angle 1,2 ° control CYBELEC CybTouch work height max. 800 mm oil volume 150 ltr. total power requirement 11,0 kW weight 5500 kg range L-W-H 4.000 x 2.410 x 1.640 mm ----- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control Ijdoxaa Rgepfx Ahyjbc * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 19800 € 380.16 € 1550 mm 6 mm 30 1/min 2.3 ° 750 mm 7,5 kW 800 mm 530 mm 1855 mm 2220 mm Iodeyg N Szepfx Ahyjbc 1630 mm 1230 mm 2900 kg The machines feature a robust, welded steel frame for maximum cutting precision Motorized back gauge 750 mm, ball screw spindles, NC control 2 cutting edges on the upper blade and 4 cutting edges on the lower blade 1000 mm squaring arm with scale, T-slot, and flip stop 2 support arms Mechanical downholder Manual cutting gap adjustment on the front Balls in the table Cutting line illumination Foot pedal Emergency stop button Operating manual with EC declaration of conformity. INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT: Blades suitable for cutting stainless steel Rear light barrier protection

Condition: good (used), functionality: fully functional, Year of construction: 2013, actuation type: electric, working width: 3,050 mm, cutting angle (min.): 1.3 °, stroke rate (min.): 10 1/min, stroke rate (max.): 47 1/min, sheet thickness (max.): 3 mm, table height: 850 mm, back gauge adjustment: motor-driven, back gauge: 650 mm, power: 11 kW (14.96 HP), input voltage: 400 V, overall weight: 2,500 kg, total length: 3,800 mm, total width: 1,650 mm, total height: 1,650 mm, number of support arms: 3, Equipment: angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, Digital display Ijdpfjyhfplox Ahyebc

Condition: excellent (used), Year of construction: 2015, Laska G530 Frozen Meat Cutter LASKA frozen meat cutters are ideally suited for cutting deep-frozen meat and fat, as well as frozen fish, cheese, and vegetables. Frozen meat cutters are designed to cut complete blocks of deep-frozen material before this material is further processed in slicers or mincers. The frozen material to be cut is fed through a loading mechanism and typically dispatched into standard transport vehicles after cutting. Frozen blocks of meat are cut into slabs of adjustable thickness by a cutting beam that moves up and down, with an interchangeable cutting knife attached to it. These slabs can simultaneously be portioned into smaller pieces by using additional cross-cutting knives. The guillotine cutter can process material with a temperature as low as -25°C. Brand: Laska Type: G530 Year: 2015 Power: 400V / 50Hz / 5.5kW Temperature: -25°C Block cross-section max. (mm): 520×300 Cross-section (mm): 28 – 60 Capacity: Up to 5,000 kg/h Machine Dimensions (LxWxH): 2,400×1,100×1,850 mm Ibsdpszwdudofx Ahysc Machine Weight: 1,000 kg.