Used Guide Fence for sale (5,474)

Condition: new, Year of construction: 2025, Martin Panel Saw T 77 - New Stock Machine - Top specification - Tiltable to both sides - Equipment: T 7710/2-a Saw Unit Prex – tiltable to both sides T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless T 7730/4-a Table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled parallel fence, lowerable in end position T 7755-a 3-axis scoring unit Ijdpjw D T Dkjfx Ahysbc T 7757-a Scorer illumination Safe Light T 777572-a MITRE cutting system RadioCompens with continuous support T 7780/1-a Rear table extension 610 x 860 mm T 7792/2-a Sensor monitoring for laterally adjustable protection hood 2 x 45 degrees T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case T 7706/1-a ConnectApp at operator level Classic Location: ex stock 54634 Bitburg - available immediately -

Year of construction: 2022, condition: new, XSD310, 400 Volt Weight: 280 kg Jointer Jointer width: 310 mm Total length of jointer table: 1400 mm Diameter of cutterhead: 70 mm Spiral cutterhead RPM: 5500 Dimensions of jointer fence: 1300 x 150 mm Bevel adjustment of jointer fence: 90 - 45 degrees Maximum chip removal: 4 mm Iodpfx Aedkl Sqshyebc Motor power: 4 HP Thickness planer Dimensions of thickness planer table: 430 x 310 mm Throat of thickness planer: 230 mm Diameter of feed rollers: 30 mm Feed rate: 6 m/min Accessories: Spiral cutterhead Handwheel adjustment for thickness table with mechanical display Location: In stock at warehouse 54634 Bitburg The machine is on display at our showroom and is available immediately.

Condition: as good as new (ex-display), Year of construction: 2025, Panhans bandsaw BSB 500 Upper and lower APA II bandsaw guides Tilting table top up to 45° Door locking system via limit switch Wheel diameter 500 mm Drive motor 1.5 kW / 2.0 hp 400 Volt motor with motor brake Band speed 1,290 m/min Maximum cutting height 320 mm Maximum cutting width 485 mm Maximum blade length 4,145 mm Table size 500x680 mm Table height 890 mm Iodpfx Ahodq D I Heyobc Dust extraction port 2x100mm Space requirement: 900x525x1925 mm Weight 220 kg CE compliant, GS tested Available in stock at 54634 Bitburg

Condition: excellent (used), CATALOGUE NUMBER 6650 TECHNICAL DATA - max cutting height 200mm - track width 450mm - shaft width 450mm - blade arbor diameter 80mm - shaft diameter 60mm - min blade diameter 250mm - max blade diameter 350mm - max blank width 870mm - min blank length 1500mm from above: - pawls - driving shaft, toothed, metal - pawls - driving shaft, toothed, metal - pressure roller - shaft with blades - 2 driving shafts, metal, pneumatically pressed from below: - guide - metal sliding roller - pawls - track - shaft with blades - track - stepless feed speed adjustment via frequency inverter 4-40m/min - main motors 2x75kW - feed motor 3kW - electric lifting of the machine body up/down 0.55kW - electric adjustment of the blade shafts 2×0.25kW - central lubrication - diameter of the extraction nozzle 2x300mm - dimensions L/W/H 3100x2600x2000mm - weight approximately 6500kg - Centering device included - toothed driving rollers 3 pcs - smooth driving rollers 8 pcs - motor 2×1.5kW - pneumatic pressure roller (from above) - side pressure roller - dimensions L/W/H 4850/1100/1800mm - weight approximately 1000kg ADVANTAGES - made in the Czech Republic - twin-shaft Iedpfxozxqvds Ahysbc - centering device - DTR documentation - year of manufacture 2010 - multi-blade saw, used, very good condition Net price: 262900 PLN Net price: 61140 EUR Net price calculated according to the exchange rate of 4.3 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 22 (ca.) Panels thickness (min/max) mm 10 / 45 (60) Numerical Control Eye-M Ibodez Nyp Hepfx Ahysc Feeding speed (adjustable) m/min 30 max (ca.) Top pressure system with rubber belt In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) RT/H (2 x kW 4 ca.) Dual-Mode Glueing Unit (Hot Melt Glue + Quick Melt system) VC600 + QMS-P Band Pressure zone (N.C. adjustment) Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit YU/SP (2 x kW 0,55 ca.) Rough Trimming unit R-E (2 x kW 1 ca.) Fine Trimming unit RSU/E (2 x kW 0,55 ca.) Multi-Profile? Corners Rounding (contour trimming) Unit C1 + C2 (4 x kW 0,35 ca.) with micro-adjustments? Profile edge scraping unit RCS (IN-OUT) Multi-Profile? Free space Glue scraping unit RCA (In-Out) Hot Air Heater (to reactivate the color of plastic tape) PH 1600 Buffing unit (2 x kW 0,3 ca.) OPTION: Automatic Return System (fastBack)

Condition: used, Year of construction: 2015, functionality: fully functional, JESSEY CHAMPION CP 1540 VS Guide and Lead Screw Lathe Manufacturer: Jessey Type: Champion CP 1540 VS Year of manufacture: 2015 Condition: used Scope of supply: - Coolant system - Machine light - Machine feet - Documentation - Chuck jaws - Digital display - MultiFix B Further information available upon request. Ibodpfx Ahszminujyjc

Condition: used, functionality: fully functional, machine/vehicle number: S/N 111000029, overall weight: 240 kg, total width: 710 mm, total length: 1,030 mm, total height: 860 mm, input voltage: 240 V, input current: 10 A, Includes lateral and vertical smoothing device. The brochure is pressed before the front trim for a sharp fold. Movable bending guides ensure flat positioning of the staple. A feed belt with a roller ensures smooth paper transport. The patented booklet folding principle guarantees exact staple positioning. With extra-long paper output – 92 cm long. Paper format: 105 x 210 to 325 x 450 mm Block thickness: 25 sheets (80 g/m²) Ibjdpfx Aez S Hxgehyjc Staple types: Flat or ring staples Stapling heads: Up to 4 (standard 2), can be used in 4 positions Connection: 240 V, 10 A, 50 Hz, 1~ Dimensions: H x W x D, 860 x 1960 x 710 mm Weight: 240 kg

Condition: excellent (used), General information Year of manufacture: 2016 Field of application: Construction Reference number: 4 Weights Empty weight: 1.300 kg Functional Dimensions of cargo space: 200 x 70 x 60 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Ibjdpfxsvpq The Ahyec Other information Fits to following machines: 17-29ton Reconditioned: Yes Delivery terms: EXW Working pressure: 160-180 bar Required hydraulic flow: 155 l/min Strike count: 330-680 Latest inspection: 2025-01-02 Production country: DE Additional information Please contact Ö. Inalkac for more information We offer Atlas Copco/ Epiroc MB1500 from 2016 with Conti Lube, all bushes, seal kit, 2 guide plate small, 2 guide plate, 2 shock absorber, guide, 2 tool pin, 2 stop pin, chisel, decals, hoses and new painted. MB1600 MB1650 MB1700 MB1200

Condition: good (used), mileage: 349,966 km, power: 130 kW (176.75 HP), first registration: 01/2016, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: intarder, color: silver, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: air conditioning, cruise control, electric window regulation, fog lights, power mirror, soot filter, spoiler, tail-lift, = Additional Options and Accessories = - Leaf spring suspension - Roof spoiler - EPS (Electronic Power Steering) - Particle filter - Radio/CD player - Side door - Toolbox = Additional Information = General Information Year of Construction: 2016 Axle Configuration Front Axle: Steered; Suspension: Leaf spring suspension Rear Axle: Suspension: Air suspension Weights Unladen weight: 8,600 kg Payload: 3,390 kg GVW (Gross Vehicle Weight): 11,990 kg Functional Cooling Engine: Diesel and electric Condition Technical Condition: good Optical Condition: good Warranty Warranty: No liability for printing and typographical errors, changes, prior sale, and mistakes! Additional Information Please contact Emad Al Shogran for further information. Vehicle Number: 133 Mercedes Benz Atego 1 Carrier Supra 1250 / Air Conditioning / Eu6 / Tail Lift .: WDB96702510021014 Suspension: Leaf / Air Transmission: Automatic Air conditioning Engine brake Distance warning assistant Lane keeping assist EURO 6 - AdBlue Ibodpfx Ahju Uiareysc Wheelbase: 4760 mm Refrigeration Unit Brand: CARRIER Type: Supra 1250 Cooling Engine: Diesel + Electric Interior Dimensions: Length: 6.65 m Width: 2.50 m Height: 2.50 m Special Equipment: Audio System: CD Radio Comfort (Bluetooth), Battery 165 Ah, Cockpit Standard, Driving Assistance System: Brake Assist (Active Brake-Assist), Driving Assistance System: Lane Keeping Assist, Electric windows, Fleetboard Dispopilot guide, Tinted windshield, Generator 100 A, Holder for Fleetboard Dispopilot, Communication interface, Fuel tank: 180 L plastic, LED light package, Frame extension, Spare wheel, Reversing warning signal acoustic (warning signal outside), Switch for tail lift, Seats in the cab: Driver's seat armrest, Seats in the cab: Driver's seat sprung comfort seat, Sun visor outside, Underrun protection side Additional Equipment: Emissions standard EURO 6, Axle configuration: 4x2, Front axle load 5.3 t, Approach/front mirrors, Exhaust pipe to the center of the vehicle, Exterior mirrors electrically adjustable, left, Compressed air tank steel, Low compressed air unit, Two-step entry, Cab: S ClassicSpace, Cab variant: ClassicSpace, Suspension: Leaf / Air, Front springs 4.4 t, Gearbox 6-speed - Type: G 71-6, Gearbox 6-speed - Type: G 90-6, Urea tank (AdBlue): 25 L, Lifting roof manual (steel), Rear axle bevel gear 390, Info display 10.4 cm with additional display, Body/Structure: Chassis, Engine 5.1 L - 130 kW Diesel (OM 934), Engine brake, Engine compartment encapsulation, Wheelbase 4760 mm, Disc brakes front and rear axle, Seat cover / Upholstery: Fabric, Seats in the cab: Front passenger single seat, fixed, Splash guard rear fender, Stabilizer rear axle, Steering system type cab, Tachograph / EG control device, Underrun protection rear fixed, Underrun protection front, Immobilizer, Permissible total weight 11.99 t Refrigeration unit brand: Carrier = Company Information = No liability for printing and typographical errors, changes, prior sale, and mistakes! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email:

Condition: new, Year of construction: 2026, The WLT-T Transport Trolley with Pneumatic Wheels and a load capacity of 200 kg is designed for lifting and moving loads in warehouses, workshops, and production facilities. It combines a mast structure with load forks and a compact chassis, facilitating material handling at workstations. The 250 mm diameter pneumatic wheels help absorb vibrations during movement, improving comfort when manually manoeuvring the trolley. Key Advantages of the WLT-T 200 kg Transport Trolley - Rated load capacity of 200 kg – enables the handling of components, crates, and equipment during transport and assembly operations. - Large Ø250 mm pneumatic wheels – help absorb vibrations generated during movement and make the trolley easier to manoeuvre. - 535 mm long forks – provide stable support for loads during lifting and transportation. - Lowered fork height of 65 mm – makes it easier to pick up loads with limited ground clearance. - Overall width of 540 mm – facilitates manoeuvring around workstations and reduces the space required for storing the trolley. - Lifting and transportation in one device – helps reduce the need to manually carry heavy components between successive stages of work. Mast Structure and Load Handling Forks The WLT-T lifting trolley features a vertical mast that guides the fork assembly, allowing the load support height to be adjusted. The design combines lifting functionality with a mobile chassis, making the trolley suitable for both delivering materials and positioning them at workstations. Two handles provide the operator with a comfortable grip when manually moving and positioning the trolley. 535 mm Long Forks with a Maximum Spacing of 515 mm The forks consist of two separate support elements for the transported load. Their length of 535 mm and maximum spacing of 515 mm allow the trolley to handle loads with dimensions suited to the available support surface. The open design makes it easier to monitor the position of the forks when approaching a load and aligning it with the workstation. Low Fork Height in the Lowered Position The initial fork height of 65 mm makes it easier to slide the forks beneath items positioned close to the floor. This is particularly useful when handling crates with feet, components mounted on supports, and equipment with sufficient clearance for fork insertion. The low support height simplifies load positioning before lifting and further transportation. Pneumatic Wheels – Improved Manoeuvring Comfort The transport trolley with pneumatic wheels uses the flexibility of its tyres to reduce vibrations transmitted from the floor to the chassis. Large wheels with a diameter of 250 mm facilitate smooth movement over hard surfaces, which is particularly important during frequent transportation between workstations. Equipment and Structural Components - Mast structure with a lifting fork assembly. Iedsz Sy T Repfx Ahyebc - Load forks with a length of 535 mm. - Large pneumatic wheels with a diameter of 250 mm. - Small front wheels with a diameter of 50 mm. - Handles for manually manoeuvring the trolley. Technical Specifications of the WLT-T Transport Trolley Rated load capacity 200 kg Maximum fork spacing 515 mm Fork length 535 mm Fork height in lowered position 65 mm Overall length 860 mm Overall width 540 mm Overall height 1210 mm Large wheel diameter 250 mm Small wheel diameter 50 mm Weight 48 kg

Condition: used, Debarker Cambio 71-75 AA Manufacturer: Kockum/Soderhamn Eriksson Model: Cambio 71-75 Infeed conveyor Outfeed conveyor Dimensions and weight Approximate dimensions: Length: 3000 mm Width: 2200 mm Height: 2595 mm Weight: ~9800 kg Ibsdpfx Ahsz Sy Dpoyec Transport weight: ~10 700 kg Maximum log diameter: 75 cm Minimum log diameter: 11 cm Minimum log length: 3.0 m without additional guide rollers 1.5 m with additional rollers Rotor speed: 220 rpm Feed speeds: 23 / 35 / 47 / 71 m/min (4-stage)

Condition: used, functionality: fully functional, The conveyor belt is for sale; technical details: Voltage: 220 volts / 50 Hz Frequency inverter: adjustable from 0-6 m/min Ibodpfx Ahjz Sxikeyec Discharge height: 700 mm Inclined belt length: 1300 mm Usable width: 400 mm Overall width: 600 mm Mobile Height-adjustable Discharge height: 900 mm - 1100 mm Guide plate: 80 mm

Condition: used, empty load weight: 7,810 kg, maximum load weight: 28,190 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2025, next inspection (TÜV): 05/2027, loading space length: 13,513 mm, loading space width: 2,550 mm, loading space height: 2,641 mm, total length: 25,500 mm, total width: 39,960 mm, total height: 140,000 mm, suspension: air, tire size: 385/65 R 22,5, Year of construction: 2025, front tire size: 385/65 R 22,5, rear tire size: 385/65 R 22,5, emission class: none, Equipment: ABS, ABS, axle manufacturer SAF, aluminum chassis, color grey, air suspension with lift function, raising and lowering, loading volume 90, lift axle on 1st and 3rd axle, portal doors, disc brakes, fixed side underrun protection, toolbox, 2x LED reversing lights, 4x LED reversing lights on the sides (2x on the support gear and 2x behind the axle assembly), 1x LED spotlight inside the cargo area, broom and shovel holder on the left side underrun protection (in direction of travel), Cargofloor control type CF 500 SL-C - E"-CONTROL, 10mm ribbed, with additional plastic guides beneath the floor profiles, double wing doors (1/2 - 1/2 with upper door crossbar), radio remote control, rear door impact protection - aluminum buffers across the full width of the rear wall, roof bows and tarp, maintenance flap front left, working platform with access ladder, roll-up tarpaulin (PVC tarpaulin, Panama quality, 900g/m²), cargo securing certificate DIN EN 12642 Code XL, production 5/2025, like new condition!!! Ibsdpfez S N Tgsx Ahyjc

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrics 3x400V 50 / 60Hz - Gimbal-mounted 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - ceramic bearings incl. liquid cooling with infinitely height-adjustable extraction hood - electric-motor controlled - full rated power at approx. 12,000 rpm - speed: 1000 - 24000 rpm - drive: 3-phase HF motor, inverter-controlled - direction of rotation: clockwise/counter-clockwise - 2 controlled compressed-air connections - interface for aggregates - tool weight (rotating): 6 kg - max. saw blade Ø 350 - spindle cooling: liquid cooling - extraction hood infinitely variable - Profit H350 16.30: CNC machining centre in gantry design (without tool) with digital drives (driven on both sides). The machine column of the Profit H350 16.30 is made of thick-walled, electrically welded rectangular tubes. The steel ribbing inside the column achieves high stability. - Machining field H350 16.30: Travel of the axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm clearance height Axis positioning speeds: depend on the selected safety system (these can be found in the layout). - Travelling gantry driven on both sides - Guide system X axis: The travelling gantry of the X axis is driven via a rack with inclined, crowned tooth form - This guarantees highest precision. The reduction gear ensures highest machining quality and repeat accuracy. The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. - Guide system Y axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Y axis is positioned by means of a ground recirculating ball screw. - Guide system Z axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Z axis is positioned by means of a ground recirculating ball screw. - Automatic central lubrication: The grease is delivered in a controlled manner to the guide carriages of the X, Y and Z axes as well as to the recirculating ball screws in Y and Z. The lubrication process is carried out automatically after a specified time. - 12-position linear tool changer on the left of the machine column incl. a pick-up position for aggregates: The 12-position linear changer ensures shortest changeover times and offers sufficient space for milling tools. Ibsdpfx Ahezlbpbjyec One aggregate change position (fitting variants see layout) Max. tool diameter 250 mm Max. tool length 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in the Y direction. Horizontal 6 spindles: 4 spindles in the X direction and 2 spindles in the Y direction. Forward stroke = 70 mm max. drill length = 70 mm and shank D = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – in the X direction max. saw blade diameter 120 mm max. blade thickness 5 mm max. speed infinitely variable up to 7500 rpm. The drilling group covers the entire working field both horizontally and vertically. - Controlled central extraction connection: Via the program control, either the drilling head or the milling spindle is extracted. This controlled slide gate achieves an optimised extraction performance. Connection diameter see layout - 6 workpiece supports: With front and rear...

Condition: excellent (used), Belt grinding machine HOLZKRAFT LBSM 2505 - used - Grinding belt cover, Right-/left-hand rotation, Swiveling grinding unit ----- Technical data ----- Table size: 2,400 x 800 mm, Throat depth: 650 mm, Motor: 3 kW, Grinding belt dimensions (LxW): 150 x 6,400 mm Quality information: - Belt tracking checked - Grinding shoe checked - Height adjustment checked - Grinding table guide checked - Complete basic cleaning performed Ijdsyfwcropfx Ahyebc - Electrical system checked - Immediately ready for operation

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,480 kg, maximum load weight: 34,520 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,450 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Year of construction: 2026, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Semi-Trailer Container Chassis Fine-grained steel welded construction, semi-trailer plate with replaceable 2 kingpins and 2 kingpin positions Front locking mechanism on tipper ram mounting block with guide wedges on both sides, rear locking mechanism on continuous rotary shaft with spring return Without subframe for self-supporting containers Container mounts: Locking cross members, double-mounted for securing 1 x 20-foot container (Note: low fifth-wheel load for 20-foot containers) 24 metric tons, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Clear support foot corner dimension or clear rear swing radius approx. 1850 mm 2 wheel chocks with holders Half-shell fenders with anti-spray flaps per EC standards Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK Screw coupling, fixed part, nominal diameter 48 mm. (without hose connection) Hydraulic operation via truck auxiliary power unit Hydraulic connection with hose and HDK screw plug, nominal diameter = 48 mm, with knurled nut Axles + Suspension 3 SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44to Gross train weight Air suspension. Brake System 2-line compressed air brake system Color-coded lines for easy servicing. Spring-loaded parking brake 2 non-reversible coupling heads at the front, without connecting line EBS, Electronic Brake System with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly; no truck installation required (no calibrated scale) Wheels and Tires 6 385/65 R22.5 (manufacturer’s choice) 6 steel rims, factory silver Electrical System 24 volts, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-keeping lights 2 x 7-pin reverse-proof sockets in front, without connecting cables Country of Registration/License Plates Germany Iedsz R Tr Sjpfx Ahysbc With DEKRA approval and inspection report (in accordance with §13 EG - FGV) 24/7 Service Hotline Prepared for single-line license plate holder Contour markings with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame: colour of choice 10-year warranty against rust-through Support feet: Black coated Note: Archive images!

Condition: repair required (used), Year of construction: 2013, functionality: unexamined, machine/vehicle number: GM 5251/01-01 NEU 4541/01-08 ALT, travel distance X-axis: 550 mm, travel distance Y-axis: 655 mm, travel distance Z-axis: 685 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 75 m/min, feed rate Z-axis: 90 m/min, nominal power (apparent): 58 kVA, torque: 197 Nm, total height: 3,100 mm, total length: 4,000 mm, total width: 2,700 mm, table width: 1,300 mm, table length: 800 mm, table load: 1,070 kg, rotational speed (max.): 8,000 rpm, overall weight: 15,000 kg, spindle motor power: 25,000 W, spindle mount: MK 0, number of spindles: 2, number of slots in tool magazine: 72, tool length: 300 mm, tool diameter: 160 mm, tool weight: 8 g, input voltage: 400 V, type of input current: AC, Equipment: rotational speed infinitely variable, GROB G320EA22K – CNC Double-Spindle Horizontal Machining Center, 4 Axes The machine is stored in Hamburg. No CE marking, as it was originally intended for use in China. For sale is a GROB G320EA22K CNC horizontal machining center with two spindles and 4-axis machining. The machine is equipped with a Siemens 840D sl control system and is suitable for precise and efficient machining in industrial production. Technical data: Manufacturer: GROB Machine type: G320EA22K Machine type: CNC horizontal machining center Ijdpfx Ajz R Upfshyebc Control system: Siemens 840D sl Number of axes: 4 Number of spindles: 2 Spindle distance: 550 mm Spindle manufacturer: Kessler Max. spindle speed: 8,000 rpm Spindle power: 20 kW (S1) / 25 kW (S6) Spindle torque: 159 Nm (S1) / 197 Nm (S6) Tool holder: HSK-A63 Tool magazine: 2 × 49 slots (98 tools) Max. tool diameter: 86 mm / 160 mm with limitations Max. tool length: 300 mm Max. tool weight: 8 kg Tool change time chip-to-chip: 2.7 seconds Travel distances X/Y/Z: 550 × 655 × 685 mm Rapid traverse X/Y/Z: 65 / 55 / 90 m/min NC rotary table: Ø 800 / 1,300 mm Max. workpiece weight on the rotary table: 1,070 kg Rotary table speed: 25 rpm Positioning accuracy of axes: 0.006 mm Repeatability of axes: 0.004 mm High-pressure coolant system: 80 bar Coolant temperature control: available Filter fineness: 30 µm Machine dimensions (L × W × H): approx. 4,000 × 2,700 × 3,100 mm Machine weight: approx. 15,000 kg Installed power: 58 kW Compressed air requirement: 15 Nm³/h at 5 bar Additional equipment: Fully enclosed machine Closed-loop control of the axes Temperature monitoring and water cooling of the spindles Automatic tool changer Tool cleaning system Central lubrication for guides and ball screws Automatic, reversible high-pressure coolant filtration No CE certification, as it was originally intended for use in China.

Condition: good (used), functionality: fully functional, total length of planing tables: 2,800 mm, Equipment: CE marking, For sale is a robust Panhans surface planer, type 324. The machine comes from a public vocational school and is equipped with a motor brake. Technical specifications: - Manufacturer: Panhans - Machine No.: 683 - Planing width: approx. 410 mm - Total table length: approx. 2,800 mm Ibsdez R Uv Espfx Ahyec - Cutterhead: Tersa - Adjustable fence - Adjustment for concave and convex planing - Motor brake included - Top-mounted control panel Feed system available for an additional price of €500 net! You will receive an invoice with VAT shown. Demonstration/inspection possible by prior appointment.

Condition: excellent (used), Year of construction: 2013, For sale: a complete travelling crane with an electric chain hoist from the renowned Stahl brand, with a lifting capacity of 1000 kg. The set was manufactured in 2013. The set is fully functional and ready for further operation. ✅ Technical specifications: * Year of manufacture: 2013 * Lifting capacity: 1000 kg (1 ton) * Hoist: STAHL ST2010 – a robust, reliable unit * Drive type: electric, chain * Total length of the crane: 1046 cm (10.46 m) * Stable load-bearing beam + cable and power supply guides * Can be inspected on site – it was used in a clean production hall The crane is in very good technical condition – well-maintained and ready for use. Ibsdpfx Ahjz Sk S Ejyec Ideal for a workshop, industrial plant, warehouse, or tool shop.

Condition: used, SincoTec Type: Exciting Mot Resonance test bench POWER SWINGLY 20 kN The POWER SWINGLY BigTable resonance test bench is designed as a dual-mass vibrator. It consists of a vibration head, which is excited via an asynchronous motor with frequency control and an eccentric motor. The vibration head is located in the upper part of the machine and generates the dynamic amplitude. The vibration head is supported on the upper traverse via pre-tensioned coil springs and is guided centrally. The center load drive is located in the lower part of the machine and applies the static preload with the aid of a geared motor via a spindle drive. The test chamber is located above the mounting table and is bounded upwards by the adjustable traverse. The control of the test bench is carried out by the EXCITING MOT control system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated steel sheet and meets protection class IP 50 according to EN 60529. Technical data: General data of the test bench: Overall height of the test bench 1840 to 2240 mm Height of the machine table 1030 mm Width of the test bench 800 mm Depth of the test bench 1500 mm Height of the test chamber max. 600 mm (without force sensor) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum stroke ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. class 1 (according to DIN EN 10002-3) Weight of the test bench approx. 1880 kg Max. weight of the clamping device 150 kg General data of the control cabinet: Overall height of the control cabinet 1900 mm Height of the table top 1080 mm Width of the control cabinet 650 mm Depth of the control cabinet 700 mm Weight of the control cabinet 152 kg Color RAI 9006 (white aluminum), table top Midnight Ijdpfxozii Awj Ahyebc Conditions for the installation site: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load-bearing capacity 170 N/cm² Voltage supply 400 V / 50 Hz (right-rotating field) Connection plug CEE socket, 5-pole, 16 A Fuse 16 A Connection and environmental conditions Mains conditions: Voltage 400 V three-phase with PE conductor and protective earth, right-rotating field Voltage fluctuations < ± 10% Short-time voltage dips < 20 ms Limits for permanent interference Radio interference level A according to VDE0871 Frequency 50 Hz ± 1% Protective earth Ground resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 13.5 kW (18.35 HP), input current: 25 A, input frequency: 50 Hz, pressing force: 160 t, table width: 740 mm, table length: 1,300 mm, table height: 200 mm, ram plate width: 920 mm, ram plate length: 580 mm, distance table to ram: 600 mm, total length: 2,500 mm, total width: 1,700 mm, total height: 3,500 mm, overall weight: 15,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, TEHSLA EPC160 – 160 TON MECHANICAL ECCENTRIC PRESS MAIN TECHNICAL DATA - Press Force: 160 tons - Stroke Rate: 24–52 strokes/min (adjustable) - Stroke Length: 16–160 mm (adjustable) - Ram Adjustment: 0–110 mm (motorized) - Maximum Opening Between Tables: 600 mm - Table Dimensions: 1,300 × 740 mm - Ram Dimensions: 920 × 580 mm - Main Motor Power: 15 kW - Control Panel: SIEMENS SIMATIC HMI MTP1200 Comfort PRO - Clutch System: Wet clutch - Safety Light Curtains: LEUZE - Ram Guidance: Eight-sided precision guiding system MACHINE TECHNICAL SPECIFICATIONS Machine Frame: Heavy-duty welded steel construction, engineered for high rigidity, structural stability and long-term durability under demanding industrial operating conditions. Control System: SIEMENS control system with SIMATIC HMI MTP1200 Comfort PRO touchscreen interface. Clutch System: Wet clutch system designed for reliable operation and long service life. Stroke Adjustment: Adjustable eccentric stroke from 16 to 160 mm. Stroke Speed Adjustment: Variable operating speed from 24 to 52 strokes per minute on plc. Iodjz R Sy Ispfx Ahysbc Ram Adjustment: Motorized ram adjustment, 0–110 mm. Guidance System: Precision eight-sided ram guiding system, providing excellent stability, accurate ram movement and reduced wear during continuous operation. Lubrication: Automatic circulating lubrication system. Overload Protection: Hydraulic overload protection system. Safety Light Curtains: LEUZE safety light curtains for operator protection. Safety Monitoring: Oil and air pressure monitoring with alarm functions. Operation Modes: Inch / Single Stroke / Continuous Stroke. Safety Operation: Two-hand control system. CE Compliance: Manufactured in accordance with applicable CE safety requirements. OPTIONAL EQUIPMENT & UPGRADES - Pneumatic holding systems - Mechanical or pneumatic ejector systems - Die cushions / pneumatic cushions - Customized ejector and cushion configurations - Additional protective safety guarding - Remote monitoring and control systems - Remote diagnostics, servicing and troubleshooting - Additional automation solutions according to customer requirements WARRANTY: 12 months CUSTOM PRESS MANUFACTURING TEHSLA is a Slovenian manufacturer of industrial hydraulic and mechanical eccentric presses. In addition to the advertised EPC160+ model, we manufacture customized eccentric presses with different pressing capacities, working table dimensions, stroke lengths and technical configurations. Our machines can be equipped with additional automation systems, ejectors, die cushions and other customer-specific solutions. MADE IN SLOVENIA Manufacturer: TEHSLA Model:EPC160+ Country of Manufacture: Slovenia, European Union Machine Location:Ljubljana, Slovenia Inspection & Test Run:Available by prior arrangement. Contact us for further technical information, machine availability, customization options or a quotation. Other press capacities, dimensions and customized configurations are available directly from the manufacturer upon request.

Condition: used, Year of construction: 2024, Machine has 0 cutting hours Main spindle machining capacity Max. machining diameter: ø16 mm Max. machining length without re-chucking: 200 mm Max. front drilling diameter: ø10 mm Max. front tapping diameter: M8 Main spindle through-hole: ø20 mm Main spindle speed: max. 12,000 rpm Back spindle Max. back spindle chucking diameter: ø16 mm Max. back drilling diameter: ø8 mm Max. back tapping diameter: M6 Back spindle speed: max. 12,000 rpm Gang tool post (rotary tools) Max. drilling diameter ø5 mm, max. tapping diameter M5 Spindle speed: max. 8,000 rpm Turret (rotary tools) Max. drilling diameter ø5 mm, max. tapping diameter M5 Spindle speed: max. 8,000 rpm Number of stations: 10 + α Tooling Number of mountable tools: up to 32 + α Turning tools on gang tool post: 5 × 16 mm Rotary tools on gang tool post: 5–7 Back tool post: 5 fixed tools Drill sleeve: ø19.05 mm Collet, main and back spindle: 138E Guide bush: F605 Feed rates Rapid traverse, all axes (except X2 and Y2): 32 m/min X2 axis: 16 m/min Y2 axis: 8 m/min Motors Main spindle motor: 2.2 / 3.7 kW Isdpfxjz R Szls Ahyjbc Back spindle motor: 0.75 / 1.5 kW Rotary tool drives (gang tool post and turret): 0.69 kW Control and dimensions Control: Mitsubishi Meldas M730 Dimensions (W × D × H): 2,780 × 1,340 × 1,790 mm Weight: 2,900 kg Center height: 1,150 mm Option: LFV technology (Low Frequency Vibration) for chip breaking The machine comes with 5 driven tool holders and one holder for the turret. Note that the machine does not come with barfeeder.

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, COLLIN Teach-Line CSG 171 T Strand Granulator For sale is a used COLLIN Teach-Line CSG 171 T strand granulator. This compact table-top machine is used to produce granules from round plastic or polymer strands. The previously extruded and cooled strands are fed in via a pair of infeed rollers and then granulated by a fixed counter-blade and a rotating impact blade. The infeed and cutting process can be easily observed through the transparent protective cover. The cutting gap between the rotor blade and the counter-blade can be precisely adjusted. The desired speed can be regulated on the control panel. Technical data: Manufacturer: Dr. Collin GmbH Model: Teach-Line CSG 171 T Year of manufacture: 2009 Machine number: 9310 31 09 Connected power: 0.5 kW Electrical connection: 230 V / 50 Hz Rated current according to nameplate: 6 A Dimensions: approx. 290 × 500 × 540 mm Weight: approx. 50 kg Equipment and features: Pair of infeed rollers Guide piece Fixed counter-blade Iodpfx Ahez Rmvvoyobc Rotating impact blade Adjustable infeed speed Transparent protective cover Main and safety switch Compact design as a table-top machine Inspection possible by prior arrangement.

Condition: excellent (used), Year of construction: 2008, power: 42 kW (57.10 HP), pressing force: 320 t, stroke length: 4,000 mm, operating speed: 14 mm/s, reverse speed: 130 mm/s, throat depth: 400 mm, clearance between the columns: 3,150 mm, total length: 5,800 mm, total width: 2,300 mm, total height: 3,800 mm, overall weight: 23,000 kg, Make: LVD Type: PPEB-EFL 320/40 Control: CADMAN YOP: 2008 Iedpez Rmp Njfx Ahyjbc CNC Crowning Hydraulic tool clamping EFL Easy form laser measuring & correction system Set Tooling  Laser guide protection Controlled axis Y1/Y2/X/R/V-Axis Max. bending length: 4000mm Distance between column: 3150mm Max. pressing force: 320T Dis. Beam - Table: 570mm Beam stroke: 300mm Table Width: 200mm Troth beam: 400mm Approch speed: 120mm/min. Working speed: 14mm/min. Return speed: 130mm/min. Adjustment X-Axis back gauge:1000mm Control: CADMAN Power: 42kW Length: 5800mm Width: 2300mm Height: 3800mm Weight: 23000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), CATALOGUE NUMBER 7186 TECHNICAL DATA - max. planing width 510mm - max. planing height, two-sided 170mm - max. planing height, four-sided 100mm *from above: - toothed infeed roller - pawls - toothed feed roller - pressure roller - planing roller 510mm, 4-knife (2 knives installed) 4kW - smooth feed roller, outfeed *from below: - guide strip - slip roller – adjustable table with roller, up/down - planing roller 510mm, 2-knife 4kW - 2 smooth, slip rollers, adjustable *from the rear: - 2 side spindles + pressure roller - 1) vertical right spindle 100mm 2.35kW - 2) vertical left spindle 100mm 2.35kW - spindle diameter 35mm - spindles adjustable up/down, right/left - manual planing thickness adjustment - 4 feed speed settings - feed motor 1.5kW - dimensions L/W/H 1940x1320x1140mm Ibjdpfx Ajztalqshysc - weight 1330kg ADVANTAGES – ideal for processing logs, flooring, etc. – manufactured by the German brand KUPFERMUHLE – used planer, very good condition Net price: 32900 PLN Net price: 7651 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)