Used Grinding Mill for sale (13,309)

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,002 h, functionality: fully functional, machine/vehicle number: NT100JG0126, turning length: 424 mm, turning diameter: 370 mm, travel distance X-axis: 380 mm, bar passage: 52 mm, controller model: FANUC FS-31iA5 (MAPPS 4), TECHNICAL DETAILS Turning length: 424 mm Maximum turning diameter: 370 mm (270 mm with turret 2) Bar capacity: 52 mm Turning-milling spindle Full indexing capabilities: Yes X-axis travel: 380 mm Y-axis travel: ± 105 mm Z-axis travel: 460 + 155 mm (ATC) B-axis: ± 120º Spindle speed: 12,000 rpm Drive power: 9/5.5 kW Tool magazine Number of magazine positions: 38 Tool holder: Capto C5 Maximum tool length: 250 mm (210 mm for tools under Ø70 mm) Maximum tool diameter: 70 mm / Ø130 mm (with/without adjacent tools) Maximum tool weight: 5 kg Lower turret X-axis travel: 155 mm Z-axis travel: 610 mm Number of tool slots: 10 Tool speed: 6,000 rpm Drive power for driven tools: 1.5/1.2 kW Bdedjzf H Ezopfx Adrsd Main spindle Spindle speed: 6,000 rpm Drive power: 11/7.5 kW Spindle bore: 73 mm Chuck type: Hollow chuck (8") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Maximum torque: 223 Nm Counter spindle Spindle speed: 1,000 rpm B-axis: 4 fixed positions, 0º, -30º, -180º (-225º for overhang onto conveyor, if available) MACHINE DETAILS Control: FANUC FS-31iA5 (MAPPS 4) Potential rated power: 39.24 kVA Dimensions & Weight Dimensions (L x W x H): 2,705 x 2,425 x 2,385 mm Weight: 8,800 kg Operating Hours Power on: 54,061 h Spindle 1 operating hours: 9,813 h Spindle 2 operating hours: 5,002 h EQUIPMENT Chip conveyor Signal lamp High-pressure pump Air blow nozzle outside the spindle Foot switch (dual) for main and counter spindle

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: E1TAH0029, grinding length: 600 mm, grinding width: 300 mm, grinding wheel diameter: 304 mm, table length: 600 mm, table width: 300 mm, TECHNICAL DETAILS Grinding length max.: 600 mm Grinding width max.: 300 mm Distance from table surface to spindle center: 585 mm Grinding wheel dimensions: 304 x 31.75 x 76.2 mm Table and magnetic plate Table size: 600 x 300 mm Magnetic plate: 600 x 300 mm Axis movements Table longitudinal movement, hydraulic: 650 mm Transverse movement, automatic: up to 310 mm Machining: fully automatic in 3 axes Spindle and power Bodpfszgux Sox Adredd Grinding spindle power: 3.7 kW Spindle speed, frequency inverter, max.: 2,100 rpm MACHINE DETAILS Dimensions and weight Dimensions: approx. 2,700 x 1,600 x 1,850 mm Machine weight: approx. 1,990 kg EQUIPMENT Fully automatic machining in 3 axes Touchscreen control panel with program management Automatic central lubrication Cooling system with automatic paper filter Enclosed splash guard with lighting Electronic handwheel

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: F3S171901, table width: 180 mm, table length: 600 mm, coolant tank capacity: 30 l, pump capacity: 15 l/min, TECHNICAL DETAILS Clamping table dimensions: 600 x 180 mm Tool holder: SK30 Drawbar: M12 x 220 mm T-slots: similar to DIN 650 MACHINE DETAILS Coolant tank: 30 l Delivery rate: 15 l/min Bdedpfx Adjzhm Afsrsd Saddle adjustment: handwheels Spindle drive: 2-pole motor via multi-ribbed belt EQUIPMENT Arbor clamping Cooling system with 30-liter tank Coolant tank with quick-release fastener Control panel Work light Coolant hose CE marking

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details x-travel 620 mm y-travel 420 mm z-travel 400 mm Control Heidenhain TNC 410M table surface area 800 x 400 mm tool taper ISO 40 spindle turning speed - stepless 50 - 4000 U/min main drive motor 5,5 kW weight of the machine ca. 2,1 t Bdedpfx Adeziknzerod Additional information * CNC control HEIDENHAIN TNC 410M * Coolant equipment * Machine lamp

Condition: used, Year of construction: 1970, Technical details: grinding length: 1000 mm grinding width: 400 mm workpiece height: 500 mm Table dimensions: 2230 x 670 mm table surface area: 1340 x 400 mm magnetic plate size: 1000 x 410 mm table load: 450 kg throat of the spindle nose: max 330 mm grinding spindle speed: 1440 U/min total power requirement: 18,2 kW weight of the machine ca.: 3,5 nur Maschine t dimension machine xH: 1,9 x 3,3 x 2,25 m dimensions electric cabinet LxWxH: 1,0 x 0,4 x 1,4 m Bjdpjx Afpaefx Adrodd Precision surface grinding machine Possible surface grinding operations: -cross grinding; plunge grinding; face grinding and grinding with a straight grinding track Further specifications: -hydraulic table speed, infinitely variable 1...30 or 2...30 m/min. -Largest table stroke 1150 mm -Manual cross feed 0.01 mm -Manual vertical infeed of the grinding wheel 0.002mm and minimum infeed 0.001mm -Automatic infeed 0.001...0.1mm -Largest selectable total infeed amount 5.0mm -Coolant system (tank with pump) -hydr. aggregate -control cabinet *

Condition: used, Year of construction: 2014, controller manufacturer: Siemens, controller model: 840 Dsl - Operate, _____ Description: Year of manuf. : 2014 Control : Siemens 840 Dsl - Operate Turning diam. : 340 mm Turning length : 1185 mm In General: Year of manufacture:2014 Control system:Siemens 840 Dsl - Operate Swivel diameter:540 mm Turning length:1,185 mm Bar capacity:67 mm Main spindle: Technology:Direct drive spindle Speed:5,000 rpm Power:32 kW Torque:360 Nm Bar capacity:67 mm C-axis:0.001° Chuck:Hainbuch Spanntop Axfix 65 Hydraulic clamping:Differential pressure clamping Clamping cylinder:Hollow clamping cylinder Bjdezig Tmspfx Adredd Coolant supply:External (chuck flushing) Sub spindde: Technology:Direct drive spindle Speed:5,000 rpm Power:32 kW Torque:360 Nm C-axis:0.001° Chuck:Hainbuch Spanntop Axfix Hydraulic clamping:Differential pressure clamping Coolant supply:External and internal Tailstock function:Mechatronic control of the sub spindle Tool carrier I (X/Y/Z/B): Technology:Milling spindle on a travelling column Milling spindle speed:12,000 rpm Max. power:22 kW Tool holder:HSK 63 X-axis:450 mm Y-axis:200 mm (+/- 100) Z-axis:1,200 mm B-axis:+/- 110° Position measurement systems:Direct (glass scales) Tool carrier II (X/Y/Z): Technology:Tool turret on cross slide Tool drive:Direct drive Speed:10,000 rpm Power:14 kW Torque:34 Nm X-axis:195 mm Y-axis:80 mm (+/- 40) Z-axis:1,200 mm Tool holder:VDI 40 Number of tool stations:12 Steady rest:SLU2X turret steady rest, 8–101 mm Tool magazin: Technology:Chain magazine Number of stations:80 Tool changer:Double gripper Equipment: Position sensors:Direct in X1/Y1/Z1/X2/Z2/Z3 Chip removal:Chip conveyor Coolant supply:CTS system, 20 bar Tool monitoring:Easy Tool Monitor Tool measurement:Tool setter, Renishaw Part removal:Part gripper, conveyor belt Bar feeder:Interface Emulsion mist separator:Mechanical Software option I:5-axis simultaneous milling Software option II:Off-centre turning and milling Software option III:Alternating spindle speed Chucks:2x Hainbuch Spanntop

Condition: used, Year of construction: 2005, 1 used, very well-maintained crankshaft milling attachment for mounting, e.g., on a lathe for milling crankshafts or other milling operations. Manufacturer: SEMA, Origin: Austria Model: SE 100 Year of Manufacture: 2005 Technical Data: Spindle mounting: ISO 50, Runout / Test mandrel L=300 mm = 0.01 mm Speed range, continuously variable: Currently set to 2,000 rpm Spindle is designed for: Up to 3,000 rpm Drive power: Currently 15 kW The milling spindle is designed for: Up to 25 kW Bearing diameter: 110 mm The 2 bolted adapter plates under the milling spindle are each bolted on. These plates can be used for your lathe, modified, or may need to be newly manufactured. Mounting surface of the milling spindle: L x W: 490 x 250 mm Accessories / Special Features: Milling spindle: Bjdpfx Adeddziyjrsdd • The milling spindle is mounted on the flat support of your lathe • Continuously variable speed adjustment, frequency inverter manufacturer LENZE, designed for up to 30 kW • Right / Left rotation • Lifetime-lubricated spindle bearings • Stable construction with hardened and ground spindle • High precision • 2-fold supported spindle with 5 spindle bearings • Workpiece clamping via a threaded spindle • Mobile carriage with control panel • Emergency stop • Lockable main switch Indexing gear for the main spindle: • A long drive rod is mounted in the spindle bore and connected to the gear • Continuously variable speed adjustment, frequency inverter manufacturer LENZE • Right / Left rotation • Jog operation, fast / slow The pictures show this unit mounted on a universal lathe SARO SPA 10 x 3000 for milling crankshafts. This lathe is not included in the scope of supply! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2006, Milling spindle unit SEMA SE 100, e.g. for the production of crankshafts Spindle mounting: flange Speed with this gearbox: 97 rpm Spindle designed for up to 3000 rpm Drive power, currently: 22 kW The milling spindle is designed for up to 25 kW Bearing diameter: 110 mm Disc cutter SANDVIK Ø 700 x 25 mm Plunge depth of the disc cutter: 235 mm Accessories / Special features: - Disc cutter SANDVIK Ø 700 x 25 mm - Lubricated-for-life spindle bearings - Robust construction with hardened and ground spindle Bsdpfx Aoddzi Asdrodd - High precision - 2-fold bearing of the spindle with 5 spindle bearings - WZ clamping via flange Original new price at the time: approx. €34,500.00 net Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2012, x-travel 1600 mm y-travel 710 mm z-travel 700 mm Control HEIDENHAIN, TNC 124 table surface area 2200 x 550 mm Bdjdpsyyqguefx Adrod spindle taper SK 50 DIN 69871 spindle turning speed - stepless 40 - 1600 U/min spindle drive 11 kW feed X/Y/Z-axis 2000/2000/1000 mm/min. rapid traverse X/Y/Z axis 5000/5000/2500 mm/min feed motor 3 kW distance table / vertical spindle 50 - 750 mm distance table/horizontal spindle 60 - 760 mm table load max. 3000 kg total power requirement 15 kW weight of the machine ca. 8 t dimensions of machine L x W x H 3,15 x 2,75 x 2,70 m Accessories: Univ.-milling head with hydr. tool clamping, electron. handwheel, table housing, coolant

Condition: good (used), Year of construction: 1989, Surface grinding machine, manufacturer: JUNG, type: JF 520 MS, year of manufacture: 1989. Equipped with JUNG control system. Grinding surface: 600 mm, width: 200 mm. Magnetic chuck: 500 mm x 200 mm, coolant system installed. Machine documentation available. Bodpfxozicm As Adrodd Further details can be found in the data sheet.

Condition: used, Technical details: x-travel: 700 mm y-travel: 450 mm z-travel: 450 mm control: Heidenhain TNC 121 spindle taper ISO: SK 40 quill stroke vertical: 120 mm Bdsdpfozibabsx Adrsd spindle head swivable left - right: je 90° ° turning speed range: 40 - 1.600 U/min throat of the milling spindle: 200 mm table surface area: 1.050 x 627 mm table swivable approx.: +45/ -45 Grad table rotating: 360 Grad table movement - horizontal: 200 mm table feed: X/Z 5 - 5.000 mm/min table feed: Y 2,5 - 250 mm/min total power requirement: 8 kW weight approx.: 3,2 kg dimension machine xH: 2,3 x 2,0 x 1,850 m

Condition: as good as new (ex-display), Year of construction: 2024, New and unused, 340mm turning diameter, 570mm turning length, Y axis +/- 41mm, 400mm swing, 65mm bar capacity, spindle speed 4,500rpm, 15 station turret, 11/15kW spindle motor, milling 6000rpm, C axis 0.001 degrees, Bsdpfx Adeziavhersdd FANUC-i control, tailstock, coolant, tool setter, swarf conveyor, parts catcher, 3 jaw chuck, tooling,

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, total height: 3,067 mm, total width: 3,413 mm, table width: 800 mm, table length: 1,700 mm, table load: 1,500 kg, overall weight: 14,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 18,500 W, product length (max.): 4,270 mm, number of axes: 3, This 3-axis KNUTH X-MILL 1500 CNC was manufactured in 2011. It features an impressive X-axis travel of 1500 mm, Y-axis travel of 800 mm, and Z-axis travel of 700 mm. The machine includes a robust table size of 1700 x 800 mm with a load capacity of 1500 kg. If you are looking to get high-quality machining capabilities, consider the KNUTH X-MILL 1500 CNC vertical machining centre we have for sale. Contact us for further details. Bdedpfoziaggsx Adred - Number of T-slots: 5- T-slot Width: 22 mm- T-slot Spacing: 135 mm- Spindle Nose to Table Surface Distance: 170-870 mm- Throat Depth: 800 mm- Spindle Speed Range: 60-8000 rpm- Spindle Taper: MAS BT 50- X-axis Rapid Feed Rate: 15000 mm/min- Y-axis Rapid Feed Rate: 15000 mm/min- Z-axis Rapid Feed Rate: 10000 mm/min- Working Feed Rate: 5-5000 mm/min- Tool Changer Capacity: 24 positions- Positioning Accuracy: ±0.01 mm / ±0.00039"- Repeatability Accuracy: ±0.005 mm / ±0.0002"- Main Drive Motor Power (continuous / 30 min): 15 / 18.5 kW (15 / 25 Hp)- Total Power: 18.5 kW- Voltage: 400 Volt- Frequency: 50 Hz / 3 Phases Technical Specification Taper Size BT 50

Condition: used, Year of construction: 2003, functionality: fully functional, Control system: Siemens Sinumerik 840D Includes: Grinding media preparation, hydraulic unit, and portal loading system for loading and unloading the machine. Technical data: Bodpfx Aezh Ux Isdrsdd Center distance: 600 mm, Center height: 180 mm Maximum grinding diameter: 355 mm Maximum workpiece weight: 150 kg Maximum Z-axis speed: 11 m/min Minimum Z-axis speed: 0.01 m/min Maximum X-axis speed: 7.5 m/min Minimum X-axis speed: 0.01 m/min External cylindrical grinding spindle: Grinding wheel standard (outer diameter x width x inner diameter): 600 x 80 x 304.8 mm Grinding wheel peripheral speed: 5 - 50 m/s Power consumption of grinding spindle motor: 11 kW Workpiece spindle: Taper bore of workpiece spindle: MK 5 Power consumption: 2.7 kW Tailstock: Taper bore of center: MK 4 Coolant tank: 2000 liters, Lubricating oil: 30 liters, Hydraulic oil: 60 liters Operating voltage: 400 volts, 3 phases Mains frequency: 50 Hz Total machine weight: approx. 5800 kg Operating sound pressure level: 70 dB (A)

Condition: used, Year of construction: 2003, functionality: fully functional, Siemens Sinumerik 840D control system includes: grinding media preparation, hydraulic unit, and portal loading system for loading and unloading the machine Technical data: Center distance: 600 mm, center height: 180 mm maximum grinding diameter: 355 mm maximum workpiece weight: 150 kg maximum Z-axis speed: 11 m/min minimum Z-axis speed: 0.01 m/min maximum X-axis speed: 7.5 m/min minimum X-axis speed: 0.01 m/min External cylindrical grinding spindle: Grinding wheel standard (outer diameter x width x inner diameter): 600 x 80 x 304.8 mm Grinding wheel peripheral speed: 5 - 50 m/s Power consumption of grinding spindle motor: 11 kW Workpiece spindle: Taper bore of workpiece spindle stock: MK 5 Power consumption: 2.7 kW Tailstock: Taper bore of center: MK 4 Coolant tank: 2000 liters, lubricating oil: 30 liters, hydraulic oil: 60 liters Bdedpfxezh Uwqj Adrod Operating voltage: 400 volts, 3 phases Mains frequency: 50 Hz Total machine weight: approx. 5800 kg Operating sound pressure level: 70 dB (A)

Condition: used, Year of construction: 2001, functionality: fully functional, Control system: Siemens Sinumerik 840D Includes: Grinding media preparation, hydraulic unit, and portal loading system for loading and unloading the machine. Technical data: Center distance: 600 mm, Center height: 180 mm Maximum grinding diameter: 355 mm Maximum workpiece weight: 150 kg Maximum Z-axis speed: 11 m/min Minimum Z-axis speed: 0.01 m/min Maximum X-axis speed: 7.5 m/min Minimum X-axis speed: 0.01 m/min External cylindrical grinding spindle: Grinding wheel standard (outer diameter x width x inner diameter): 600 x 80 x 304.8 mm Grinding wheel peripheral speed: 5 - 50 m/s Power consumption of grinding spindle motor: 11 kW Workpiece spindle: Taper bore of workpiece spindle: MK 5 Power consumption: 2.7 kW Tailstock: Taper bore of center: MK 4 Coolant tank: 2000 liters, Lubricating oil: 30 liters, Hydraulic oil: 60 liters Operating voltage: 400 volts, 3 phases Mains frequency: 50 Hz Bdsdpfx Adszh Uvterjd Total machine weight: approx. 5800 kg Operating sound pressure level: 70 dB (A)

Condition: used, Year of construction: 2003, functionality: fully functional, Siemens Sinumerik 840D control system includes: grinding media preparation, hydraulic unit, and portal loading system for loading and unloading the machine Technical data: Bjdpfjzh Uvasx Adredd Center distance: 600 mm, center height: 180 mm maximum grinding diameter: 355 mm maximum workpiece weight: 150 kg maximum Z-axis speed: 11 m/min minimum Z-axis speed: 0.01 m/min maximum X-axis speed: 7.5 m/min minimum X-axis speed: 0.01 m/min External cylindrical grinding spindle: Grinding wheel standard (outer diameter x width x inner diameter): 600 x 80 x 304.8 mm Grinding wheel peripheral speed: 5 - 50 m/s Power consumption of grinding spindle motor: 11 kW Workpiece spindle: Taper bore of workpiece spindle stock: MK 5 Power consumption: 2.7 kW Tailstock: Taper bore of center: MK 4 Coolant tank: 2000 liters, lubricating oil: 30 liters, hydraulic oil: 60 liters Operating voltage: 400 volts, 3 phases Mains frequency: 50 Hz Total machine weight: approx. 5800 kg Operating sound pressure level: 70 dB (A)

Condition: used, Year of construction: 1999, Used machine Bdodjzh Ruljpfx Adrjd Year of manufacture: 1999 Equipment and technical data: Can be used as a surface and edge grinding machine Table size: approx. 2500 mm Table width: 700 mm Vertical adjustment of the table: 600 mm Cross adjustment of the table: 600 mm Grinding belt length: 6650 mm Grinding belt width: 150 mm Dust extraction port, left: 125 mm Dust extraction port, right: 100 mm Motor: 2.2/3 kW Dimensions L x W x H: 3560 x 1280 x 1690 mm Weight: approx. 490 kg Availability: short notice Location: 63934 Röllbach

Condition: new, width of the strips 150 mm band length 2000 mm band speed 16,5/33 m/sec total power requirement 2,6/3,37 kW turning speeds 1400/2800 U/min weight of the machine ca. 95 kg Equipment / Accessories: - Removable dust catcher Bdedpfx Aoyv Nb Nsdrod - Fine adjustment of the band adjustment - Sanding belt - Eye protection - Motor protection switch - Operation manual - Sanding table - working height adjustment - surface grinding pad

Condition: new, Year of construction: 2024, neu 2024 5546 prompt, Zwischenverkauf v Polen 1730 € 1 150 mm 2.000 x 150 mm 200 x 150 x 42 ø mm 605 mm 3000 1/min 3.5 kW 1025 mm 600 mm Bdedpfeynmw Dox Adred 1000 mm 100 kg Industrial belt grinder with following features: - Separate emergency stop - Motor brake - Standard - Reliable - Simple and practical operation - Easy to adjust - Quick belt change without tools - 5-year guarantee on the motor - Optimal safety

Condition: new, Year of construction: 2024, neu 2024 5544 prompt, Zwischenverkauf v Polen 1370 € 1 75 mm 2.000 x 75 mm 200 x 75 x 42 ø mm 605 mm 3000 1/min 3 kW 1025 mm 500 mm 1000 mm 76 kg Bdodpfeynmwwjx Adrjd Industrial belt grinder with following features: - Separate emergency stop - Motor brake - Standard - Reliable - Simple and practical operation - Easy to adjust - Quick belt change without tools - 5-year guarantee on the motor - Optimal safety

Condition: excellent (used), Year of construction: 2008, x-travel 800 mm y-travel 400 mm z-travel 500 mm Control Siemens table surface area 1270 x 320 mm spindle turning speed - stepless 0 - 6000 U/min distance spindle /table 100 - 600 mm throat 510 mm Bedpfx Adeymqwxsrsdd tool taper SK 40 weight of the machine ca. 2,7 t dimensions of the machine ca. 2,2 x 2,0 x 2,5 m

Condition: used, x-travel 300 mm y-travel 160 mm z-travel 330 mm Bdsdpfx Aoy Sbkbodrsd table surface area 600 x 200 mm table load capacity 200 kg Spindle Speed 40-2.000 U/min. tool taper SK40 dimensions 1200 x 1160 x 1800 mm machine weight ab. 800 kg

Condition: used, Year of construction: 1987, x-travel 720 mm y-travel 220 mm z-travel 450 mm Bdodpfx Adjyv N Hxersd table surface area 1000x310 mm weight of the machine ca. 1.500 kg dimensions of the machine ca. 2000x1200x1800 mm

Condition: good (used), Year of construction: 2000, Grinding booth, soundproof booth for grinding operations, suitable for noisy environments. Dimensions: depth 4000 mm, length 9000 mm, height 4 meters, with 2 sliding gates. Bdodjzh Nrcspfx Adrod