Used Grid for sale (1,555)

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), fuel type: diesel, gearing type: automatic, first registration: 10/2025, next inspection (TÜV): 10/2027, loading space length: 4,606 mm, loading space width: 1,832 mm, loading space height: 1,961 mm, emission class: euro6, color: grey, number of seats: 3, total length: 7,391 mm, total width: 2,040 mm, total height: 2,590 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, * Hill start assist * Exhaust system, EU6e (EA) * Preparation for trailer coupling (incl.), trailer stabilization, control unit without wiring harness, socket, and towing bracket * One front towing eye * Airbags for driver and front passenger with front passenger airbag deactivation * Roof shelf with storage compartments, two 1-DIN slots and reading light Lsdpfowpzkpox Ab Ueah * Sun visors, foldable and swiveling to the side * Exterior mirrors, electrically adjustable, heated, and foldable * Exterior mirrors left and right convex, with integrated LED indicator and wide-angle section * Front-wheel drive * Emergency brake assist * Battery 520 A (92 Ah) * Rubber floor in cab * Electronic parking brake * ESP with electronic differential lock, traction control (ASR), and ABS * CO2-optimized version with stone chip protection * High roof, painted in vehicle colour * Electronic immobilizer * Front and rear parking aid * Grab handles on rear pillars * USB Type-C data port(s) and charging port(s) with increased charging power * Daytime running lights with assistant light and automatic coming home/leaving home function * Electrical terminal strip and KFG preparation * Premium interior noise insulation measures * With UNECE CS&SU * 4th diesel engine 2.0L Unit 03N.G * ACC Stop & Go * 8-speed automatic transmission * Glove compartment with lockable flap, illuminated * Grab handle on partition wall in cargo area * "Climatronic" air conditioning in cab * LED main headlights with LED daytime running lights * LED interior lighting concept in passenger/cargo area * Traffic sign recognition * Reversing camera system with dynamic guidance lines * Radiator grille, black with chrome trim * High beam assist "Light Assist" * Leather multifunction steering wheel with Tiptronic * 4 speakers: 2 tweeters, 2 woofers * Digital instrument cluster * Attention and drowsiness warning * MAN SmartLink * Diesel engine 2.0 l/130 kW (4V) BiT, Common Rail * Core engine: TK1/TK4 * Fog lights incl. cornering light * Navigation system (Baseline) * MAN Connect (emergency call services/in-vehicle apps/navigation, device-dependent) with OCU high * Wheel cover centre with chrome emblem * 4 steel wheels 6½ J x 16, with 1,050 kg load capacity, in black * MAN Media Van Navigation Business * 12 V socket and 2 cup holders in instrument panel * Tyre pressure monitoring system * All-season tyres * Long wheelbase 4,490 mm with long rear overhang * Three-point automatic seat belts with height adjustment and electric belt tensioners in front * Rear wing doors with extended opening angle * Front and rear side windows and rear window in heat-insulating glass * 12 V sockets in cab (three on dashboard, for left-hand drive, an additional one in the left seat base) * "ergoActive" comfort suspension seat left * Front double passenger bench seat right, with storage compartment and foldable middle backrest * Belt monitoring, electric contact in buckle, driver and passenger seat * Seat upholstery in fabric "Toronto Grid" * Separate, adjustable seat heating, right, in 1st row (on double passenger bench seat only the door seat is heated) * Side marker lights * 2 remote keys * Registration as 3.5 t vehicle * Start-stop system with regenerative braking * Lane change assist * Crosswind assist * Headlamp cleaning system, washer fluid level indicator, heated washer nozzles in front * Intermittent windscreen wiper function with light and rain sensor * Keyless Go * Sliding door, right * Blind spot monitoring on both sides and exit w

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 21,346 h, laser power: 3,200 W, X working area max.: 3000 mm Y working area max.: 1600 mm Control: Rexroth IndraMotion MTX Laser power: 3000 watts Machine - Enclosed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamps and tools - Hydraulic clamps (3 pieces) - Maintenance-free three-phase motors for drives - Repositioning device with programmable hold-down - Foot pedal for clamp closing - Beam protection with direct access - Parts chute on the right - Parts flap on the left - Sensor for parts flap - Work area illumination - FocusLine - Retrofittable for SortMaster Compact - Protective tool - Transport and installation device TRUMPF Laser - Laser light cable (LLK) according to standard layout (10m) - Laser power control - Laser logbook function - Closed beam guidance via laser light cable (LLK) - Separate power supply for TruDisk Compact Cutting Unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punching Head - Delta Drive - Rotatable mono-tool adapter - Programmable hold-down position - Tool length compensation Lajdpfx Aboxhmtwe Ujh - Punch spray lubrication - Punch slug extraction - Forming function - Stroke counter for punch Control - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color screen - Integrated technology data - Programmable cutting gas pressure - Remote support interface - Auto shut-off with wake-up function - Program management - Production plan Data Transmission - USB interface - RJ-45 network interface - Central Link - Online Update Manager Safety - CE marking - Two-beam safety light curtain Extended Standard Equipment - TruDisk 3001 solid-state laser with 1 LLK output - Chiller (water-air) - Compact dust extraction system - 1st locating pin (right inside) - Ball tables - Good parts container for parts chute - Chip container for rear removal Extended Laser Equipment - Copper cutting package - Brass cutting package Extended Punching Equipment - MultiShear function - Multitool function - MultiBend function - Thread forming with thread counter Thread former breakage monitoring Lubricant level monitoring - Marking/fast embossing function - Engraving function - Deburring and roller technology function - Ejecting small parts function Parts Ejection - Integrated sorting function for parts chute • Sensor for parts chute • Tray line for 4 standard trays 300 x 400 mm • Customer-supplied trays Extended Machine Equipment - 1x additional clamp - Machine rated for ambient temperatures up to 43°C Special Sheet Metal Processing - Brush tables - Warping detection Options for Compact Dust Collector - CO2 extinguishing system for the compact dust collector Data Transmission - Wireless Operation Point Machine Accessories - 1 set RTC cassettes incl. die plate SheetMaster Compact - SheetMaster Compact 3000 x 1500 mm (AK05) • Loading station with spreader magnet for sheet separation • Suction frame • Vacuum sensor system • Double sheet detection • Unloading cart for scrap grid and microjoint sheets • 2nd operator's station for loading and unloading.

Condition: excellent (used), 5-Axis Machining Center with swivel milling head, pallet station, tool calibration, thermal compensation, work area extraction system, and much more. Year of manufacture: 2016 Spindle hours approx. 1,500 h (after spindle replacement at the beginning of 2025) Lajdpexhg Dijfx Ab Ujh Control System: - Heidenhain iTNC 530 HSCI - Heidenhain DCM Collision Monitoring - Heidenhain HR 410 electronic handwheel - Swiveling console with 19" monitor - Teleservice via LAN/WLAN Travel Range: - Travel X 1,000 mm, Y 1,100 mm, Z 810 mm - NC rotary table D 1,000 x 800 mm, swing diameter 1,350 mm Milling Head: - Automatic horizontal/vertical swivel milling head - Fully-fledged stepless NC axis from -1° to +90° - Blowing air through the spindle - External coolant supply via nozzle ring Drive power: 38 kW (100% duty cycle) Speed: 16,000 rpm Torque: 135 Nm at 40% duty cycle Spindle interface: HSK 63-A Media Supply: - Internal coolant feed: 50 bar - capacity 28 l/min - Paper belt filter with additional fine filter - Individual tool pressure regulation during program operation Tool Changer: - Rack magazine with 73 stations (expandable with additional racks) - Swiveling dialog operation panel - Drawer for loading and unloading tools from tool racks Tool Measurement: - 3D wireless touch probe m&h 20.00-Multi, software adapted for HSK 63-A - Including Kinematics-Opt, compatible with iTNC control, and calibration sphere on magnetic stand Pallet Changer: - Double palletizing unit, pallet diameter 1,000 x 800 mm, hole grid 100mm x 100mm, hardened drill bushes D 16mm - Rotary table unit including zero-point clamping system, loading station accessible by crane - Pallet changer unit protected with enclosure Special Equipment: - Micro-Epsilon sensor - For detection and dynamic compensation of thermal spindle growth Chip Conveyor: - Scraper belt conveyor along machine bed - Chip ejection height 1,100 mm Machine Enclosure: - Full-area protective enclosure with large angle door for crane loading and a quick-access door - Easy removal of swarf from the workspace Extraction System: - Oil and emulsion mist extraction, mechanical air filter, extraction capacity 1,800 m³/h Rotating View Window: - Viewing window integrated into the cabin door for workspace observation Camera in Work Area: - Monitor and keyboard at the operator console—allows monitoring of rear-side machining operations Machine Data: - Space requirement (without service area): approx. LxWxH 4,791 mm x 4,100 mm x 4,791 mm (including extraction system) - Machine weight approx. 19,700 kg - Total weight with all equipment plus maximum workpiece load, full tool magazine, and all operating materials: approx. 27,730 kg - Connected load: 50 kVA, 400V, 50/60 Hz This machining center, featuring an exceptionally good and practical configuration, is in very good condition. It operates with the renowned "Swiss precision." There is no service or repair backlog—in fact, the opposite. With an almost new milling spindle, the REIDEN RX 10 5X is well positioned for long-term use. Technical modifications and errors excepted.

Condition: excellent (used), Opportunity from Swiss liquidation in excellent condition Ledpfx Abjxhg Ets Usah

Condition: excellent (used), Year of construction: 2017, Picktower, 4-level shelving mezzanine system, Nedcon, approx. 6,000 m² footprint = total approx. 24,000 m², Total: 502,816 box storage locations for crates/cartons in 60x40 cm – used –: Price ex location: only €250,000 (net), dismantled, packed, and loaded! Price includes 2 goods lifts and 9 pallet transfer stations, including LED lighting with motion sensors, two staircases! The installed conveyor technology is also available for purchase at an additional cost! Manufacturer: Nedcon Type: Picktower, 4-level shelving mezzanine system Beam type: PR2 Year of manufacture: 2017 Number of bays: 22 bays at 60 cm deep x 4 levels = 88 bays = 88 bays at 60 cm depth across the levels: 3x5 shelves + 1x4 shelves = 19 shelves across 4 levels x 6 storage locations for 40 cm wide boxes: 10,032 Depth 1.20 m 324 x 4 = 1,296 220 x 4 = 880 bays Total number of bays = 2,176 units at 1.20 m depth = 2 x 60 cm deep = across the levels: 3x5 shelves + 1x4 shelves = 19 shelves across 4 levels x 6 storage locations for 40 cm wide boxes: 496,128 box storage locations Total: 502,816 box storage locations for crates/cartons in 60x40 cm! Load capacities: Shelf load: 200 kg Max. bay load: 1,000 kg Max. platform load: 350 kg (where the racks are placed) Max. platform load: 500 kg on platform surface Floor height GF / 1st FF / 2nd FF (to underside of platform bracing): approx. 3 m 3rd FF: approx. 2.26 m Number of levels: GF approx. 4 per bay 1st / 2nd and 3rd FF: approx. 5 levels per bay each Total height: approx. 11.87 m Dimensions: approx. 68.43 m x 88.88 m = 6,082 m² Rack/frame depth: approx. 1.20 m = 2x 60 cm Clear width: approx. 2.62 m = example: 6 storage spots for 40 cm wide boxes per side All mesh shelf panels have an anti-push-through grid in the center, allowing use of both sides for 60 cm deep crates/cartons. The system is essentially built like a pallet racking system – crossbeams are hung between the frames, with about 6 depth bars per level between the beams, and mesh panels placed on top as decking, enabling each rack to be used as 2x 60 cm deep configurations. Racking is accessible from both sides. Widths: Outer aisle: approx. 4.85 m; Racking: approx. 29.80 m plus central aisle: 4 m, racking: approx. 29.78 m plus outer aisle: 2.15 m = total approx. 68.43 m Front area width: one side approx. 15.80 m as platform area (see plans) Depth: Racking approx. 83.58 m plus platform area to front approx. 5.30 m = total 88.88 m Aisle widths between racks: 1.60 m Aisle widths in transverse aisles (3 units): each 2.55 m Chipboard panels: mainly approx. 2 m x 1.59 m Frame width: approx. 8 cm Bay depth: approx. 1.20 m, one row is approx. 60 cm deep Bay widths: approx. 2.62 m Two mesh panels per level installed Beam height: approx. 5 cm; top support depth: approx. 5 cm Some racks have divider mesh in the center (secured with cable ties), some with compartment dividers An existing sprinkler system will be scrapped or is available at extra charge Lifts: 2 units serving 4 levels Manufacturer: Gebhardt Type: Goods Lift Conver 146, 146.03 Load height: max. 2 m Machine number: 2170139 Year of manufacture: 2017 Condition: good – very good Lsdpfx Absxhfvks Ujah Availability: Dismantling start mid-November 2025, available approx. mid-January 2026 Location: NRW (North Rhine-Westphalia)

Year of construction: 2025, condition: new, functionality: fully functional, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. Laodpfx Abew Et Ile Ush The device is very easy to operate without programming knowledge - Fiber laser 20 Watt (Optional: 30 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with anti-trap protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: new, TECHNICAL DATA: - Base area: 4,000 x 5,000 mm [other options available] - Grid: 4,000 x 5,000 mm - Top edge of flooring: 3,340 mm - Clear internal height: 3,000 mm - Flooring: 38 mm chipboard, P6 raw/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new Scope of delivery: - Columns - Primary and secondary beams - Bracing cross members - Flooring - Fastening material PRICES: Variant I: Base area: 20 m² | Size: 4,000 x 5,000 mm | €2,137.50 net, plus transport costs and VAT Variant II: Base area: 40 m² | Size: 4,000 x 10,000 mm | €3,979.30 net, plus transport costs and VAT Variant III: Base area: 40 m² | Size: 8,000 x 5,000 mm | €3,874.00 net, plus transport costs and VAT Variant IV: Base area: 60 m² | Size: 4,000 x 15,000 mm | €5,655.36 net, plus transport costs and VAT Variant V: Base area: 80 m² | Size: 4,000 x 20,000 mm | €7,445.76 net, plus transport costs and VAT Variant VI: Base area: 80 m² | Size: 8,000 x 10,000 mm | €6,986.24 net, plus transport costs and VAT Variant VII: Base area: 80 m² | Size: 16,000 x 5,000 mm | €7,061.76 net, plus transport costs and VAT Variant VIII: Base area: 120 m² | Size: 8,000 x 15,000 mm | €9,930.06 net, plus transport costs and VAT Variant IX: Base area: 120 m² | Size: 10,000 x 12,000 mm | €9,671.76 net, plus transport costs and VAT Variant X: Base area: 160 m² | Size: 8,000 x 20,000 mm | €13,063.67 net, plus transport costs and VAT Variant XI: Base area: 160 m² | Size: 16,000 x 10,000 mm | €12,880.98 net, plus transport costs and VAT Variant XII: Base area: 240 m² | Size: 16,000 x 15,000 mm | €18,258.52 net, plus transport costs and VAT Variant XIII: Base area: 320 m² | Size: 16,000 x 20,000 mm | €23,955.92 net, plus transport costs and VAT Optional accessories: - Guard railing - Flush wall connection Lajdexmkwwjpfx Ab Ush - Staircase - Transfer station - Collision protection YOUR CONTACTS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOMIZED DESIGN & MANUFACTURING This mezzanine system is an example from our standard range. Of course, we can design and manufacture your warehouse mezzanine exactly to your operational requirements – tailored to surface area, load capacity, installation height, and intended application. TRANSPORT & INSTALLATION We will gladly assist you with the transport and installation of the item. This product is available for collection. Delivery or shipping is available at an additional cost. The extra charges depend on the delivery location and shipment size; please contact us for an individual quote. TERMS OF PAYMENT Payment terms are to be agreed upon in the event of an order. All prices are per item/net, as specified in the description (plus VAT). You will, of course, receive an invoice showing VAT separately. ABOUT US The company DLK in Nordhorn deals with new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and craftsmanship. ✅ Four successes – The four cornerstones of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: used, functionality: fully functional, Julabo FCW 2500T Recirculating Chiller. Julabo FC circulating chillers are an environmentally friendly and economical way to perform any cooling task, making them the perfect alternative to tap water cooling. Their compact design makes them easy to place under laboratory benches and their bright display makes it easy to read the current and set temperature. Main features of FC circulating chillers: - Bright LED temperature display with 0.1 °C resolution - MULTI-DISPLAY with complex menu functions (e.g. control parameters, alarm functions, calibration setting) - ACC full temperature range cooling - ATC1 1-point calibration - PID1 temperature controller - Integrated timer - Continuously operating, powerful circulating pump - Pressure display: 0...2,5 bar - Front filling level indicator - Low and high temperature protection with audible alarm Ledpouyu R Nsfx Ab Uoah - Dry run protection with visual and audible alarm - RS 232 with LIMS option - With bath drainage tap - Removable cooling grid for easy cleaning of the heat exchanger - Integrated 1.2 kW heating coil - W models with water-cooled cooling system Good working condition. Please check out our other listings as well.

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 200 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 15 m/min, controller manufacturer: LNC-Control, workpiece length (max.): 3,200 mm, workpiece width (max.): 2,100 mm, workpiece height (max.): 200 mm, workpiece weight (max.): 1,500 kg, Equipment: rotational speed infinitely variable, BudgeCaft is a manufacturer of high-quality CNC machines. We design, develop, assemble, and sell CNC machines for businesses and industrial manufacturers. BEST DEAL Transport, installation, machine instruction, and CAD/CAM training are provided by Danmar Machines (languages: Dutch, English, French, Italian, or German). Additional charges may apply depending on the location. • Starter tool kit • ISO30 • ER32/ER40 collets Lodpswc Uadofx Ab Uoah • Vacuum pump • ATC spindle CC 9 kW • 1 year of online support/helpdesk for CAD/software (English) • 12-month standard factory warranty Suitable for machining: wood, panel material, acrylic, PVC, aluminum, foam, multiplex board, plasterboard, rock wool, plastics, etc. - 9 kW ATC spindle ISO30 ER32/ER40 - LNC MW control system - Leadshine servo motors - Tool change magazine - Vacuum table - Vacuum pump - Powerful side channel blower, air pump - Pegasus CAD/CAM software Custom configurations available Working area dimensions:  1300 x 2600mm € 31,800  1600 x 3200mm € 37,500  2100 x 3200mm € 41,600 Linear tool magazine automatic changer: 10-12-16 position tool changers, automatic tool change during operation. Working area X-axis: 2600-3200 mm Working area Y-axis: 1300-1600-2100 mm Z-axis stroke: 200 mm Gantry construction: Yes Spindle motor: 9 kW servo motor (ATC spindle) Speed: 1,000-24,000 rpm Axis travel X-axis: 50 m/min Axis travel Y-axis: 50 m/min Axis travel Z-axis: 15 m/min Tool holder: ISO30-ER32-ER40 Software: Pegasus PWoodEntry Vacuum pump: included

Condition: as good as new (ex-display), functionality: fully functional, saw blade diameter: 300 mm, cutting length (max.): 5,300 mm, cutting depth: 80 mm, total height: 3,055 mm, total length: 6,689 mm, total width: 1,766 mm, extraction nozzle diameter: 140 mm, input voltage: 400 V, input frequency: 50 Hz, power: 5.52 kW (7.51 HP), Further technical data Vertical cutting height: 2,150 mm / 2,150 mm (with lowering function) Horizontal cutting height: 2,100 mm Width: 1,766 mm (free-standing) / 1,383 mm (wall-mounted) Cutting length: 5,300 mm / 3,000 mm / 5,000 mm (with lowering function) Saw frame Self-supporting, torsion-resistant, welded frame with latticework reinforcement on 4 solid machine feet Automatically deflecting timber support wall TRK1 with integrated small parts timber shelf Panel lowering device (PAV) with 2 panel lowering units for board materials up to max. 160 kg (80 kg per unit) Length stop profile above central support up to zero cut position Continuous length stop profile above roller support with flip stop Precise 17-fold roller support, pneumatically braked Swivelling central support along the entire length, support grid made of aluminum with plastic pads Unit for wall mounting Aluminum small parts support (1 pair), can be used individually Saw beam & saw unit Stable, durable saw beam with double locking Robustly mounted motor carriage for high cutting precision Pneumatic clamping of the motor carriage Powerful, high-torque saw motor 5.5 kW (7.5 HP) Integrated, high-performance TRK dust extraction system for external extraction unit Supersilent sound insulation Electromagnetic motor brake Paper holder Control Clear push-button control for easy operation Positioning of the panel lowering device via two-hand control User guidance via status LED indicators on panel lowering units Operating hours counter Dimension adjustment Programmable cam switch for recurring dimensions Laser-guided display of horizontal cuts Digital measurement system DMS-Y, including motorized fine adjustment Digital measurement system DMS-X, including manual fine adjustment, installation selectable above central or roller support Lsdpfx Aexazapob Uoah Optional equipment 006 Striebig free-standing base support 103 Digital measurement system DMS, X-axis 104 Digital measurement system DMS, Y-axis 105 Additional digital measurement system DMS, X-axis 200 Pro Lock Easy-Fix tool clamping system at the saw blade 201 Scoring saw unit VSA 300 Additional panel lowering unit 401 Complete aluminum small parts support Including delivery and installation in postal code areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89

Condition: used, Year of construction: 2002, Machining Centre Manufacturer: Weeke Type: R BHC 500 Year of manufacture: 2002 Ljdpfxoxl Rxre Ab Ujah Three-axis machine The drilling head is defective – non-functional Working area: 3,250 x 1,300 mm Sale without tools. The machine has already been dismantled.

Condition: new, Year of construction: 2025, functionality: fully functional, The CO2 laser plotter is designed for cutting and engraving a wide range of materials, such as Plexiglas, leather, rubber, wood, plywood, paper, cork, textiles and a variety of engraving laminates. It is a versatile and extremely useful device in the production processes of many industries. The CO2 1490 laser is perfect for both prototyping, small-scale production and personalization. The laser technology provides high precision cutting and engraving, as well as speed and accuracy in making complex designs and details. - Tube power: 100 [W], - Table type: knife + honeycomb, - Cooling: water-based, - Machine power: 1000 [W], - Weight: approx. 300 [kg], - Power supply: 230 V±10%/50-60Hz, - Interface: USB, - Work surface: 1400 x 900 [mm], - Positioning accuracy: ±0.01mm, - Engraving speed: 1-800 [mm/s], Ledpfxsur Sv Eo Ab Ueah - Feed system: stepper motors (servo option), - Positioning system: red dot (laser), - Cutting speed: 1-600 [mm/s]. The plotter comes with modern software to operate the machine, which allows it to work with programs such as Corel Draw, AutoCAD.

Condition: new, TECHNICAL DATA: - Base area: 4,000 x 5,000 mm [other configurations available] - Grid: 4,000 x 5,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Floor covering: 38 mm chipboard P6 raw/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new Scope of delivery: - Columns/supports - Main and secondary beams - Bracing crosses - Floor covering - Fastening material PRICES: Variant I: Base area: 20 m² | Dimensions: 4,000 x 5,000 mm | €2,091.60 net, plus transport costs and VAT Variant II: Base area: 40 m² | Dimensions: 4,000 x 10,000 mm | €3,754.80 net, plus transport costs and VAT Variant III: Base area: 40 m² | Dimensions: 8,000 x 5,000 mm | €3,591.00 net, plus transport costs and VAT Variant IV: Base area: 60 m² | Dimensions: 4,000 x 15,000 mm | €5,395.00 net, plus transport costs and VAT Variant V: Base area: 80 m² | Dimensions: 4,000 x 20,000 mm | €6,825.00 net, plus transport costs and VAT Variant VI: Base area: 80 m² | Dimensions: 8,000 x 10,000 mm | €6,462.50 net, plus transport costs and VAT Variant VII: Base area: 80 m² | Dimensions: 16,000 x 5,000 mm | €6,552.50 net, plus transport costs and VAT Variant VIII: Base area: 120 m² | Dimensions: 8,000 x 15,000 mm | €9,238.00 net, plus transport costs and VAT Variant IX: Base area: 120 m² | Dimensions: 10,000 x 12,000 mm | €8,785.40 net, plus transport costs and VAT Variant X: Base area: 160 m² | Dimensions: 8,000 x 20,000 mm | €12,211.52 net, plus transport costs and VAT Variant XI: Base area: 160 m² | Dimensions: 16,000 x 10,000 mm | €12,040.40 net, plus transport costs and VAT Variant XII: Base area: 240 m² | Dimensions: 16,000 x 15,000 mm | €17,580.72 net, plus transport costs and VAT Variant XIII: Base area: 320 m² | Dimensions: 16,000 x 20,000 mm | €23,076.40 net, plus transport costs and VAT Optional accessories: - Railing - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACTS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM DESIGN & MANUFACTURE TO YOUR SPECIFICATIONS This platform system is an example from our standard range. Of course, we also design and manufacture your storage platform precisely to your operational requirements – tailored to area, load capacity, installation height, and intended use. Ledsxmku Nopfx Ab Ueah TRANSPORT & INSTALLATION We are pleased to assist you with transport and assembly. This item is available for collection. Delivery or shipping is available for an additional charge. Extra costs depend on the destination and scope of the shipment and can be individually requested from us. PAYMENT TERMS Payment terms are to be agreed upon in case of an order. The price is given per unit/net price or as described in the text (plus VAT). You will, of course, receive an invoice showing VAT. ABOUT US DLK in Nordhorn deals in new and used products in the areas of warehouse logistics, conveyor technology, warehouse platforms, textile storage, as well as machinery for trade, industry, and crafts. ✅ Four wins – the success building blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: new, Year of construction: 2025, functionality: fully functional, Pros: Ljdpfx Aeur N A Nob Uoah • comprehensive processing (cutting, drilling, milling, engraving) • stable structure guaranteeing maximum precision and reliability • table with a vacuum system • free access to the machine enabling operation by one operator • the possibility of placing the entire palette of plates on the tray CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 150 mm DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: new, TECHNICAL DATA: - Base area: 5,000 x 6,000 mm [other variants available] - Grid: 5,000 x 6,000 mm - Upper edge of flooring: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm chipboard, grade P6, raw/white - Load capacity: 500 kg - Colour: RAL of your choice - Condition: new The platforms can be expanded in the specified grid as standard. Other sizes and heights are available upon request. Our team will be happy to provide advice! Scope of delivery: - Supports - Primary and secondary beams - Cross bracing - Flooring - Fastening materials PRICES: Version I: Base area: 30 m² | Dimensions: 5,000 x 6,000 mm | €4,499.65 net, plus shipping costs and VAT. Version II: Base area: 60 m² | Dimensions: 5,000 x 12,000 mm | €7,393.50 net, plus shipping costs and VAT. Version III: Base area: 90 m² | Dimensions: 5,000 x 18,000 mm | €7,303.60 net, plus shipping costs and VAT. Version IV: Base area: 120 m² | Dimensions: 5,000 x 24,000 mm | €10,513.84 net, plus shipping costs and VAT. Version V: Base area: 60 m² | Dimensions: 10,000 x 6,000 mm | €13,707.36 net, plus shipping costs and VAT. Version VI: Base area: 180 m² | Dimensions: 10,000 x 18,000 mm | €19,027.30 net, plus shipping costs and VAT. Version VII: Base area: 240 m² | Dimensions: 10,000 x 24,000 mm | €25,003.69 net, plus shipping costs and VAT. Laodpfsxmkqdox Ab Ueh Further variants available Optional accessories: - Guardrail - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACT PARTNERS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ INDIVIDUAL PLANNING & CUSTOM MANUFACTURING This platform system is an example from our standard range. Of course, we can design and manufacture your warehouse platform precisely to your operational requirements – tailored to area, load capacity, installation height, and intended application. Our design department will prepare an individual, non-binding quotation based on your specifications. Whether for new construction, extension, or modernization of existing systems – we support you with expert knowledge and practical solutions. TRANSPORT & ASSEMBLY We are happy to assist you with the transport and installation of the goods. This item is available for collection. Delivery or shipping is available at an additional cost. The additional costs depend on the delivery location and scope of shipment and can be requested from us individually. PAYMENT TERMS Payment terms will be agreed upon in case of order. The price is per unit/net price as stated in the description (plus VAT). Of course, you will receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, storage platforms, textile warehouses, as well as machines for trade, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands at favorable conditions. If you have any questions, please feel free to contact us. ✅ Four Winning Factors – The Four Success Components of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: new, Year of construction: 2025, The CNC 2030 SPECIAL milling plotter is a high-precision machine built in Poland, used for machining many engineering materials, i.e.: wood, wood-based (chipboard, MDF, OSB, etc.), plastics (Plexiglas, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. CONSTRUCTION: The plotter is made entirely of high quality steel. During the manufacturing process, all components undergo a special heat treatment. WORKING SURFACE: The working area of our machine tool is 2100 x 3100 [mm]. It is possible to manufacture the machine with a different working area. Z-AXIS RANGE AND GANTRY CLEARANCE: Ljdpfoirmgfsx Ab Usah The Z-axis range is 200 mm as standard. However, it is possible to increase it to 400 mm. DRIVES: High-resolution, high-power digital motors have been used to drive our machine tools, ensuring adequate acceleration and speed in each direction. The X and Y axes use classic and well-proven helical slats, which ensure long service life and precision, and a high-performance ball screw is used to drive the Z axis. SPRING: A powerful, liquid-cooled and durable high-end brushless spindle is used to drive the cutting tool. The spindle bearings are high-quality machine bearings, which are very quiet and guarantee above-average durability. The spindle speed ranges from 6 to 24,000 rpm. SOFTWARE: The machine has been provided with suitable, easy-to-use CAD/CAM software in the latest version. CONTROL: This is done by means of a controller, which has its own processor and operating memory to ensure stable and reliable operation. The controller has a function to return to further operation after power loss so there is no need to initialise the program from scratch. VACUUM TABLE: The table is made with raster technology, thanks to the sections used we can separate any part of the table with a seal. This allows us to adapt the working area to the specific workpiece. A well-chosen vacuum pump according to the size of the table will guarantee uniform suction of the material to the table. 6-POSITION LINEAR TOOL MAGAZINE: The linear magazine enables an automatic machining process. It is used for multi-tool machining. In addition, it allows for faster and more efficient work and contributes to the elimination of operator errors. The standard magazine on our machines is for 6 positions. It can be extended to 16 positions. Oscillating knife The oscillating knife is a state-of-the-art head fitted to CNC machines, designed for cutting low-density materials. The blade moves up and down and thus 'slices' the material. This makes it possible to cut thick, soft materials - FOAM foam, magnetic foils, corrugated cardboard, textiles.

Condition: new, TECHNICAL DATA: - Base dimensions: 5,000 x 5,000 mm [other versions available] - Grid: 5,000 x 5,000 mm - Top edge of floor surface: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm raw/white chipboard (P6 grade) - Load capacity: 350 kg - Colour: RAL colour of your choice - Condition: new The platforms can be expanded in the specified grid as standard. Other sizes and heights available on request. Our team will be happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Bracing crosses - Flooring - Mounting materials PRICES: Version I: Base area: 25 m² | Dimensions: 5,000 x 5,000 mm | €2,863.50 net, plus shipping and VAT. Version II: Base area: 50 m² | Dimensions: 5,000 x 10,000 mm | €5,040.00 net, plus shipping and VAT. Version III: Base area: 75 m² | Dimensions: 5,000 x 15,000 mm | €7,033.95 net, plus shipping and VAT. Version IV: Base area: 100 m² | Dimensions: 5,000 x 20,000 mm | €9,206.61 net, plus shipping and VAT. Version V: Base area: 100 m² | Dimensions: 10,000 x 20,000 mm | €8,916.48 net, plus shipping and VAT. Version VI: Base area: 150 m² | Dimensions: 5,000 x 5,000 mm | €13,075.20 net, plus shipping and VAT. Version VII: Base area: 200 m² | Dimensions: 10,000 x 20,000 mm | €16,519.56 net, plus shipping and VAT. Version VIII: Base area: 300 m² | Dimensions: 5,000 x 5,000 mm | €24,309.81 net, plus shipping and VAT. Additional versions available Optional accessories - Guard rails - Flush wall connection - Staircase - Transfer station Ljdpsxmkdkefx Ab Usah - Impact protection YOUR CONTACTS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. This item is available for collection. Delivery or shipping is available at an additional cost. The extra charges will depend on the delivery location and scope of the shipment and can be provided by us upon request. PAYMENT TERMS Payment terms are agreed upon in the event of an order. All prices are per unit/net price or as stated in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, deals with new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage systems as well as machinery for commerce, industry and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive terms. Please contact us with any questions. Four wins – The cornerstones of DLK’s success – Warehouse Technology | Levelmaker® | Logistics | Solutions.

Condition: new, Year of construction: 2025, Router CNC2030 ATC Lajdeirfavspfx Ab Ujh 4 axes, tilting spindle +/- 90 degrees working area 2100 x 3000 [mm] The ATC series of plotters was created for professional use in large industrial plants and factories. These machines are designed to process a wide range of materials. In order to meet the demands of heavier machining, the ATC machines feature an additionally reinforced construction and more powerful AC servo drives on each axis. A vacuum work table is standard on these machines. It is also possible to install a hybrid table. Plotters in this series are equipped as standard with automatic tool changing, a six-position linear magazine and a tool height sensor. The solutions used significantly speed up the machining process requiring the use of several cutters. Materials to be machined: wood wood-based materials (chipboard, MDF, OSB, etc.) plastics composites PVC non-ferrous metals (aluminium, brass, copper, etc.) CONSTRUCTION: The structure of the machine tool is made of steel and cast iron which gives it high rigidity, as well as resistance to the overloads associated with the machining process. WORKING SURFACE: The usable area of our machine tool is 2100 x 3000 [mm]. MATERIAL CLAMPING: The machine is equipped with a vacuum table. It is possible to install a hybrid or T-table. Z-AXIS RANGE AND GANTRY CLEARANCE: The Z-axis range is 300 [mm] as standard (can be increased). DRIVES: SERVO motors have been used to drive our machine tools, ensuring adequate acceleration and speed in each direction. The X and Y axes are driven using classic and proven helical rollers to ensure long service life and precision, while the Z axis is driven using a high-performance ball screw. All axes move on rail guides.... SPRING: A powerful, liquid-cooled and durable high-end brushless spindle is used to drive the cutting tool. The spindle bearings are high-quality machine bearings, which are very quiet and guarantee above-average durability. The spindle speed ranges from 6 to 24,000 rpm. The power supply is provided by an inverter, which has more power than the spindle, which protects against speed drops when operating under heavy load. TOOL STORAGE: The machine tool comes standard with a linear tool magazine equipped with 6 ISO30 cones. SOFTWARE: The machine has been supplied with the appropriate CAD/CAM software in its latest version. The software makes it possible to design parts quickly and easily, which the programme then converts into so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is controlled by a controller, which has its own processor and operating memory to ensure stable and reliable operation. The machine controller is equipped with active vector analysis functions, so that operation of the machine is smooth and there is little overshoot during processing. The controller has a recovery function to continue operation after a power loss, so there is no need to initialise the programme from scratch. The controller's on-board memory allows the machine to work without having to load the programme each time.

Condition: new, Year of construction: 2025, 2040 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 4100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: Lajdpfx Asin Uilob Ujh - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: new, Year of construction: 2025, 1525 ATC milling ploter THE MACHINE HAS A TOOL STORAGE EQUIPPED WITH 6 ISO30 CONES !!! Lsdpsin Eyvofx Ab Ueah CNC 1525 ATC milling plotter is a precise machine constructed in Poland, it is used to process many engineering materials, i.e. wood, wood-based materials (chipboard, MDF, OSB etc.), plastics (plexiglass, PVC, HPL etc.), composites (dibond, carbon, alucobond), soft metals, etc. The ATC series machines have an additionally reinforced structure and the applied AC servo drives on each axis, coupled with an affordable price, leave the competition far behind. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 1500 x 2500 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 300 mm DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: new, Year of construction: 2025, 1520 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 1500 x 2000 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. Lodpfoin Eztox Ab Ueah SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: new, Year of construction: 2025, 1020 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. Lsdpoin Ezdofx Ab Ujah CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 1000 x 2000 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: new, Year of construction: 2025, The ATC series was created for professional use in large industrial plants and factories. Like the plotters of the SPECIAL series, it can be designed for machining various materials. To meet the demands of heavier machining, ATC machines use an additional reinforced structure and stronger AC servo drives on each axis. The presence of five axes provides support in the machining process of even the most demanding elements. The standard in these devices is a vacuum work table. It is also possible to install a hybrid table. The plotters in this series come standard with automatic tool change, a six-position linear magazine and a tool height sensor. The applied solutions significantly accelerate the machining process requiring the use of several milling cutters. Processed materials: -wood - wood-based materials (chipboard, MDF, OSB, etc.) -plastics -Composites Laedpfein Etzex Ab Ush -PVC - non-ferrous metals (aluminum, brass, copper, etc.) CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. MATERIAL FASTENING: The machine is equipped with a vacuum table. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 300 mm DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. TOOL MAGAZINE: The standard equipment of the machine is a linear tool magazine equipped with 6 ISO30 cones. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time.

Condition: new, Year of construction: 2025, 1325 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 1500 x 2500 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. Lasdjin Eu Hopfx Ab Ueh CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: new, Year of construction: 2025, 1012 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 1000 x 1200 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. Lodpfx Aein Ewzsb Ujah DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table