Used Grid Frame for sale (9,302)

Condition: excellent (used), Here we offer you a TOX press-in machine TOX-C-frame press. TOX Pressotechnik Press-in machine TOX-C-frame press Pneumohydraulic manual workstation with process monitoring for pressing in functional elements. Technical data: Press type EMB 030.068.Α.001 Drive KWE3O.0O.17O.10H Pneumatic connection G3/4'' Compressed air preparation filtered and dried compressed air max. particle size 40 µm Air pressure working process Pmin. = 3,0 bar Рmах. = 6,0 bar Pressing force 170 kN Total stroke / scraper stroke 170 mm/ 10 mm Control STE 326-366-3/4"-90-230٧/АС special cpl. Cgjdpjhhil Tofx Ac Non Electrical connection 90-230V/AC Ambient temperature operation Тmiп. = 10°C Tmax. = 60°C Tox press-in monitoring EPW 500FP Force / displacement measurement Holding-up device ZHE for Tox press Insertion dimensions: Width 1917.5 mm Height 2506 mm Depth 1917.5 mm Protective grid circuit Leuze B20/B21 Light curtain Press-in tool see (pictures 15 to 18) Press-in sleeve (Fig. 17) 24.5 ∅ mm Range of application, use Press-fit Weight: 2200 kg Type: EMB 030.068.A.001 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, data are reserved!) Further questions we can answer on the phone for you.

Condition: used, tank capacity: 8,651 l, GENERAL Equipment: Crane lugs Design: suspended Remarks: Support ring made of Fe; manhole diameter approx. 480 mm; total height including agitator gearbox (without gearbox approx. 3500 mm); Speed: 26.5 / 118 rpm Internal diameter: 2,000 mm Total height: 4,550 mm Heating/cooling: available Power: 5 / 15 kW Max. permitted operating temperature: 220 °C Max. permitted operating overpressure: 20.0 bar Max. overpressure: 6.0 bar Agitator: frame blade agitator Base shape: ring Location: Bremen Technical documentation: drawing Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Cgedexqavdjpfx Ac Njn Volume: 8,651 liters Double-jacket volume: 313.0 liters Cylinder wall thickness: 8 mm Product-contacting material: V2A 1.4541 (AISI 321) Condition: used Last application: chemical industry VESSEL Max. permitted operating temperature: 200 °C HEATING / COOLING JACKET Max. permitted operating vacuum: 1.0 bar (negative pressure) Bottom temperature control: half-pipe coil EQUIPMENT Manhole / access hatch: in top head Note: motor missing, manhole cover plated Outlet: 105 mm MATERIAL SPECIFICATION Temperature control system material: V4A 1.4571 (AISI 316) Flange material: steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm AGITATOR 1 Agitator positioning: centered in top head Agitator equipment: agitator element: frame blade agitator; agitator motor missing but available from manufacturer; various agitator documentation available Top head wall thickness: 14 mm

Condition: used, tank capacity: 8,609 l, GENERAL Equipment: Crane lugs Design: Suspended Remarks: Support ring made of Fe; manway diameter approx. 480 mm; internal tank with signs of corrosion (see photos); overall height incl. agitator gearbox (approx. 3400 mm without gearbox); Speed: 52 / 104 rpm Internal diameter: 2,000 mm Overall height: 4,950 mm Heating/Cooling: present Max. allowable operating temperature: 220 °C Max. allowable operating overpressure: 20.0 bar Max. overpressure: 6.0 bar Top head: Removable / hinged top head Agitator: Beam agitator Support type: Ring Location: Bremen Technical documents: Drawing Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 8,609 liters Volume double jacket: 313.0 liters Cylinder wall thickness: 8 mm Product-contacting material: Stainless steel V4A 1.4571 (AISI316) Condition: Used Cylindrical height: 2,190 mm Previous use: Chemicals TANK Max. allowable operating temperature: 200 °C Cjdoxqau Tspfx Ac Nogn HEATING/COOLING JACKET Max. allowable negative operating pressure: 1.0 bar Bottom temperature control: Half-pipe coil EQUIPMENT Manway / dome: in top head Notes: Motor missing, manway cover missing Outlet: 100 mm MATERIAL SPECIFICATION Temperature control system material: Stainless steel V4A 1.4571 (AISI316) Flange material: Steel AGITATOR 1 Agitator manufacturer: Ekato TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm Agitator equipment: Agitator type: Frame blade agitator; agitator motor missing but available from manufacturer; various agitator documentation available Top head wall thickness: 14 mm

Condition: used, Used machine Used pneumatic frame press from Maweg MNo.: 7004124588 Pressing area: length approx. 3500 mm / height approx. 2450 mm 2 horizontal press cylinders 3 vertical press cylinders Availability: by arrangement Location: Röllbach Cedpfewka Nmox Ac Nogn

Condition: good (used), Lichtschranke , Schutzfeldhöhe 605 mm , Reichweite bis 6 m , IP 65 Cgsdpfx Aei An Epoc Non

Condition: good (used), Lichtschranke ,Schutzfeldhöhe 1.050 mm , Reichweite bis 19 m , IP 65 Cgsdpji An Hqefx Ac Njn

Year of construction: 1994, condition: good (used), Rivo gang wheel sharpening machine Codpspl D Hxofx Ac Njgn Tyop GA 250

Condition: excellent (used), Year of construction: 1992, 4.5 kW motor Working height 245 cm Working width max. 365 cm Codpfx Acstq S H Ae Nsgn

Year of construction: 2016, condition: excellent (used), machine/vehicle number: 216 105, BARATTI FRAMED VACUUM PUMP WITH SUCTION FILTER AND SILENCER Equipment / Additional information: Roots Blower Section. oil and wear-free compression, air-cooled, V-belt drive with tension rails and belt guard and two-stage exhaust silencer Incl. the following accessories: -Vacuum relief valve Cgedpfx Ajhqmghjc Njn -saugs. Fine filter 3" -Connection piece internal thread 3" - Rohrfederman. -1..0 bar, filled with glycerine -Drive motor Blower data: Max. negative pressure: 500 mbar, abs. Suction volume: 440 m3/h Fan speed: 2920 rpm Noise level: approx. 79 dB (A) Engine data: 7.5 kW, 2930 rpm, 400/690 V, 50 Hz, IP 55 ISO class F, B3, KKL

Condition: excellent (used), Line for door jambs (frames), with END-CUTTING, ROUTERING for COUNTER-PLATE and HINGE INSERTION (Anuba). Composed of: X10030A) Loading Conveyor X10030B) Transfer Conveyor X10030C) Double-end cutting and drilling machine "AMS" Cgodjqwyclspfx Ac Nen - Left-side Cutting 45° - Drilling - Cutting 90° - Right-side Cutting 45° - Drilling X10030D) Angular Conveyor (90°) X10030E) Anuba Inserting Machine "MASTERWOOD" Mod. MULTITEC X10030F) Strike Plate Routering Machine "MASTERWOOD" Mod. Teknomat 3000

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beams No. 2 Horizontal top supporting beams (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Horizontal metal arms with vacuum cups, adjustables OPTIONAL No. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader No. 1 Motorized rollers table (which receives panels from the Loader) Separate electric and command panel Electronic Programmer Perimetral safety metal grids Total installed motor power Kw 17,7 Working capacity (cycles/min) 16-20 (ca.) Min/Max panels thickness mm 10-50 (ca.) Codpfx Aceflc T Sj Negn Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3000 (ca.)

Condition: excellent (used), UNLOADER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) Cedpfx Acjd Rg Dzo Njgn N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arm with vacuum cups, adjustables N. 2 Out-side rollers way (on gound) to out-feed pile of panels from the Unloader N. 1 Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°). Dimensions mm 7168 (ca.) Separate electric and command panel Electronic Programmer OMRON Perimetral safety metal grids Working capacity (cycles/min) 16 - 20 (ca.) Min/Max panels thickness mm 10 - 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw 20.8

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) N. 4 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader Cgedpfod Rg Dpox Ac Non N. 1 Out-side motorized rollers table (which in-feed the panels to the Unloader), with also cross motorized conveyor belts (at 90°), dimensions mm 7232 (ca.) Separate electric and command panel Electronic Programmer OMRON Perimetral safety metal grids Working capacity (cycles/min) 16 - 20 (ca.) Min/Max panels thickness mm 10 - 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw 23.3

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Cgjdpfx Acsfi Tg He Non Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which out-feed the panels from the Loader) Separate electric and command panel Perimetral safety metal grids Cjdpswbp Nwofx Ac Njgn Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 80

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Gantry (Portal) machine, belonging to the line (SOFIT code: J10039) Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which in-feed the panels to the Unloader) Cedel Hycwspfx Ac Nsgn Separate electric and command panel Electronic Programmer PLC MAGELIS Perimetral safety metal grids Working capacity (cycles/min) 10 (ca.) Min/Max panels thickness mm 10 - 60 (ca.) Min dimensions of the panels mm (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw

Condition: excellent (used), UNLOADER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Gantry (Portal) machine, belonging to the line (SOFIT code: JZ1030) Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arm with vacuum cups, adjustables N. 2 Out-side rollers way (on gound) to out-feed pile of panels from the Unloader N. 1 Out-side motorized rollers table (which brings panels to the Unloader) Cjdpfx Ajl Hyfcoc Negn Separate electric and command panel Electronic Programmer PLC MAGELIS Perimetral safety metal grids Working capacity (cycles/min) 10 (ca.) Min/Max panels thickness mm 10 - 60 (ca.) Min dimensions of the panels mm (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw

Condition: excellent (used), STACKER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on ground) to out-feed pile of panels from the Unloader/Stacker Cgedpst Ty A Aefx Ac Njn No. 1 Out-side motorized rollers table (which brings panels to the Unloader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 80

Condition: like new (used), Year of construction: 2016, General Electric ( GE) power plant with TOTAL power - 1.500 MW Cedpfox N A Rdex Ac Njgn NEVER USED! NOTE - frequency is 50 Hz 2x 750MW Gas Based CCPP ( 4x gas turbines PLUS 2x steam turbines ) Please contact us for more details. Thank you!

Condition: used, LED ceiling light TRILUX type Belviso C2 625 CDP LED 3900nw LED semi-recessed luminaire with CDP microprismatic cover. Louvre luminaires, ceiling luminaires, recessed ceiling luminaire Linear luminaire, high bay luminaire, high bay luminaire suitable for Odenwald ceiling System dimensions 625 x 625 mm Output 45 watts Mains connection 230 Volt, 50 Hz Cgjdpfx Asvbu Awec Non Light color neutral white Luminaire luminous flux 4000 lm Color temperature 4000 K - Suitable for ceiling cut-outs 610 mm x 610 mm, installation depth 65 mm - Sturdy luminaire housing made of sheet steel - Glare-free plastic cover with microprismatic CDP surface - All-round, exclusive light framing - Very high-quality workmanship (net new price over EUR 500) Luminaire dimensions Length: 620 mm Width: 620 mm Lamp height: 72 mm Weight: approx. 8.9 kg Very good condition Used but without damage approx. 100 pieces available Price per piece

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3600x800x1900 mm Weight 2400 kg Total power requirement 16 kw Cgodpfovz E Nusx Ac Nsn

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, total width: 1,800 mm, total length: 4,500 mm, total height: 3,500 mm, working height: 2,100 mm, working width: 3,000 mm, overall weight: 2,700 kg, input frequency: 50 Hz, height adjustment type: electric, power: 5.5 kW (7.48 HP), compressed air connection: 6 bar, type of input current: DC, Technical Description – Casolin Junior Frame Press The “Casolin Junior” frame press is a hydraulic vertical frame press designed for the efficient production of medium and large series of window and door frames. Manufactured by the Italian company Casolin G. & C. s.n.c., it is constructed for industrial manufacturing processes in woodworking and window production. Purpose of Application This machine is used for hydraulic pressing and assembly of window and door frames after pre-gluing or initial assembly. It ensures uniform pressure distribution and high pressing force to achieve precise frame geometry and a durable connection of components. Design and Function The Casolin Junior is a vertical, free-standing hydraulic press. It consists of a robust steel frame with hydraulic vertical and horizontal cylinders that close and clamp the frame elements over defined pressing paths. The pressing force is generated by an electrohydraulic system that enables both vertical and horizontal pressure movements. Key Features: * Hydraulic Pressure: The machine operates with independently adjustable hydraulic cylinders for vertical and horizontal pressing movements to ensure stable and even force distribution on the frame. * Self-centering Horizontal Cylinders: These ensure that pressure is always applied centrally to the frame structure, increasing the quality and precision of the press joint. * Ergonomic Operation: Control panel with clearly arranged controls for simple handling and setting of pressing parameters; optionally, an optoelectronic measuring and control system can be integrated for automatic adjustment of pressing dimensions. * Usable working height (min–max): approx. 350 – 2,100 mm * Usable working width (min–max): approx. 250 – 3,000 mm Cedsx Np Ebopfx Ac Njgn * Vertical pressing force: approx. 900 – 9,000 kg * Horizontal pressing force per cylinder: approx. 280 – 2,800 kg * Horizontal cylinder stroke: approx. 100 mm * Hydraulic pump capacity: approx. 4 – 5.5 kW * Weight: approx. 2,700 kg * CE marking: machine complies with relevant CE standards. Dismantling and removal by the buyer, as soon as possible.

Condition: excellent (used), Year of construction: 2024, 100 units of mesh decks, 1 ton per pallet position, for pallet racking 1.20m deep – New: Price per unit ex works: now only €9 instead of €20 (net)! Only available as a complete lot! Manufacturer: MantaMESH Type: MantaMESH Year of manufacture: 2024 Condition: very good Available: immediately Location: 58540 Meinerzhagen ANSI MH 26.2 - 2017 compliant Performance independent from rack beams Uniformly distributed load (UDL) (kg): 1000 Permissible deflection (mm): 7.3 Cgjdettu Sgopfx Ac Non Load at structural failure (kg): 2000 Features: - ANSI MH 26.2 - 2017 compliant - Made in Germany - Pre-galvanized, hemmed support channels - SafeEDGE® on mesh and support channels - Mesh offers over 70% open area - EU Design Registration No. 002435099-0003 Specifications: Beam type: Box beam 50 Racking depth (mm): 1200 Mesh depth (mm): 1202 Mesh width (mm): 879 Pitch upper wire (mm): 25 Pitch lower wire (mm): 100 Upper wire diameter (mm): 4 Lower wire diameter (mm): 5 Support channel thickness (mm): 1.2 Number of support channels: 5 Finish: Pre-galvanized Weight (kg): 12.24 Front: - Deflection (mm): 30 - Deflection type: External - Deflection direction: downward Rear: - Deflection (mm): 30 - Deflection type: External - Deflection direction: downward

Condition: used, Working width 3500 mm Working height 2550 mm Number of cylinders 6 St. loading dimensions L x W x H 4500x950x2900 mm Hess Speedy frame press ----- will be checked Insertion dimension / pressing length max. 3,500 mm Insertion dimension / pressing height max. 2,550 mm Sliding carriage for width adjustment locking in 50 mm Double hole grid system Electric height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the abutment plates can be preselected in 4 positions 3 vertical printing cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N Csdpfx Aoxnqw Tjc Njgn 3 horizontal printing cylinders stroke 80 mm Pressure force per cylinder 1250 kN / 12500 N Printing plate depth 100 mm width 140 mm Grid for cylinder fixation/rear bearing 50 mm Medium pressure beam with shut-off valve Final pressure switch-off and pressure control Control and pressing process in touch button operation Adjustable pressing pressure min. 25 – max. 160 bar Electrical connection 2.2 kW / 400V 3 pendulum pressure plates for studio windows 1 pendulum pressure plate for pointed windows 1 extension for pendulum pressure plate 1 small parts allowance Image and video not original, show identical model ----- (technical data according to the manufacturer - no guarantee!)

Condition: like new (used), Kronen PGW grid cutter Csdpoit I A Nsfx Ac Negn Stainless grid cutter, pneumatic cutting of fruits and vegetables into various cutting forms, mobile