Used Graphite for sale (195)

Condition: new, maximum load weight: 32,900 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 10,160 mm, loading space width: 2,460 mm, loading space height: 2,200 mm, loading space volume: 55 m³, Year of construction: 2025, Equipment: ABS, New Vehicle – Immediately Available! For sale, rental, or lease with purchase option by arrangement! Approx. 55 m³ Granalu aluminium tipping semi-trailer / combination tailgate / new vehicle / also available for rental! --- * Manufacturer: Granalu * Model: AERO – Grain Tipping Trailer * First registration: - (New vehicle) * Gross weight: 39,000 kg * Unladen weight (manufacturer spec.): 6,100 kg * Payload: 32,900 kg * Axles: 3x Jost axles with first axle lift / off-road starting aid / disc brakes * Suspension: Air suspension with raise and lower function * Tyres: 385/65 R22.5 * Colour: Tipper body & tarpaulin RAL 7001 silver grey, chassis RAL 7016 anthracite/graphite grey * EBS: Wabco * Combination tailgate (swing & pendulum gates) with 2x grain discharge chutes * 1x rotary bar lock per swing door * Additional locks on the sides and below the rear wall * Front wall sloped, 5 mm aluminium * Side walls: 6 mm aluminium, tapering to 3 mm towards top rail * Floor: 6 mm aluminium * Aluminium chassis * Aluminium landing legs * Hyva tipping cylinder (max. 250 bar), high and low pressure * Fifth wheel height: 1,200 mm (unladen) * Sliding tarpaulin with central locking * 4 crossmembers (3 pivotable) * Operator platform at front with access on the left * Internal front left access ladder * Tarpaulin hooks * Automatic lowering when tipping * Water tank * Toolbox * Aluminium ladder * Wheel chocks * Shovel and broom holder Kjdpfx Ajw I I H Hoh Njll * Acoustic reverse warning system * 2x LED reversing lights * 5-chamber LED rear lights * Foldable underrun protection * Single mudguards New Vehicle – Immediately Available! For sale, rental, or lease with purchase option by arrangement! Notice regarding potential errors in this advertisement: Despite careful preparation, there may be occasional errors in the text or information provided. We accept no liability for mistakes, changes, or prior sale. All information provided without guarantee. Please contact us to confirm details or clarify any further questions.

Condition: used, Year of construction: 2017, Technical data: Number of printing units: 8 Maximum printing width: 1270 mm Maximum web width: 1320 mm Minimum web width: 300–570 mm (depending on unwind/rewind specification) Minimum repeat length: 360 mm (ARUN system: from 380 mm) Maximum repeat length: 800 mm Repeat length adjustment: increments of 0.1 mm; correction ±2% Anilox roller internal diameter: 136.989 mm Anilox roller circumference: 500 mm Sleeve length: 1350 mm Maximum mechanical speed: 500 m/min (or 400 m/min for basic unwind/rewind) Operating printing speed depends on substrate, inks, transfer, plate type, image, screen ruling, anilox volume, etc. Corona treatment unit (Ahlbrandt) Gas drying Non-stop shafted unwind 1000 mm Non-stop shafted rewind 1000 mm Automatic viscosity control (INKSPEC) Additional drying enhancements (ECLIPSE gas burners) Infeed/outfeed extensions Automatic sleeve change systems Central chiller for temperature stabilization (Hyperchill ICE039) Ionisation system (SIMCO) Side-lay control (Erhardt+Leimer) EFFICIENCY maximum mechanical speed: 500 m/min FALCON – automatic print register and impression setting Advanced print inspection system FAST BLADE – integrated doctor blade quick-change system INKSTORM – automatic wash-up system (optional feature) Bosch Rexroth INDRAMAT direct-drive technology JOB MANAGEMENT – remote job preparation from PC PRINT QUALITY CDTS – central cylinder thermal stabilization system PCTS – thermal stabilization for anilox and plate cylinders PPP – printing plate protection DYNAMIC IMPRESSION – electronic compensation of inking unit impression forces Machine design focused on high print stability with composite graphite sleeve EASY OPERATION Intuitive touch screen Easy access to web path Klsdox H Unvspfx Ah Nel Doctor blade chambers with FASTBLADE quick-change system FASTADAPT – automatic chamber positioning adjustment

Condition: good (used), Year of construction: 2015, Number of printing decks 8 Max. print width 820 mm Max. material width 850 mm Min. material width 300 mm Min. print length 260 mm if not specified otherwise for optional accessories Air core diameter 76.510 mm Repeat steel lock 310 mm Max. print length 600 mm OPERATION EFFICIENCY Max. mechanic speed 300 m/min FALCON - automatic setting of print registers and impressions Sophisticated system for print control FAST BLADE - system for doctor blade exchange in the machine INKSTORM - automatic wash-up system (option) Bosh Rexroth INDRAMAT direct drive technology JOB MANAGEMENT - preparation of future jobs from remote PC PRINT QUALITY CDTS - central drum thermal stabilization system DYNAMIC IMPRESSION - printing deck impression electronic compensation system Machine design with emphasis on high printing stability Composite graphite cores (option) EASY OPERATION Intuitive touch display (Touch Screen) Easy access to web path Doctor blade chambers with FAST BLADE system for blade quick exchange in the FASTBLADE machine FASTADAPT - doctor blade chamber position automatic adaptation CORONA, AHLBRANDT - 4 kW Side control before printing Kledpfx Ahotuc R He Nol Printing unit 8-printing deck unit Central drum with diameter of 1,450 mm Gas dying system Printed material cooling unit Unit with cooling cylinder and servo drive Web guiding system prior to the rewind unit Web fault control system BST SUPER HANDY SCAN 4000 chip digital camera Rewind unit NONSTOP 800 rewind unit For roll max. diameter of 800 mm Roll clamping using pneumatic expansion shaft

Condition: used, Year of construction: 2024, New demonstration machine! List price: €4,938 net. The upper section is a heavy-duty cast iron design with an integrated three-phase motor, 380 V, 2.2 kW, 2850 rpm. The machine is equipped with an integrated switch-plug combination, motor protection switch, and main switch compliant with VDE standards. Dimensions of the sanding belt backing: 850 x 150 mm. The steel work table height is adjustable via spring tension. Belt dimensions: 150 x 2280 mm. The sanding belt backing is covered with a graphite slip lining. The machine is supplied with an assortment of sanding belts; also included in the scope of delivery are an angle and miter gauge. When connected to a central extraction system, the machine is dust-tested (GS) by Holz-BG Stuttgart for an airspeed of at least 20 m/s. Standard equipment includes: - tiltable 90-180°, - motorized belt oscillation, - small support table at the deflection roller, - pneumatic belt tensioning. Technical data: Motor power: 2.2 kW. Sanding belt size: 150 x 2280 mm. Sanding belt speed: 22 m/s. Table size: 750 x 350 mm. Space requirement: 1000 x 800 mm. Weight: from 180 kg. Extraction connection Ø: 100 mm. Storage location: Rieth. Klodpfxex Hwpvj Ah Nsl

Condition: used, Year of construction: 2018, operating hours: 0 h, functionality: fully functional, machine/vehicle number: A031154, For sale is a robust and versatile edge sanding machine, Holzkraft KSO 1500, ideal for professional woodworking sanding applications. The machine excels with its tilting sanding unit, oscillating sanding belt, and an extensive range of standard features to ensure top sanding quality. Features & Functions - Tilting sanding unit 0–90° For vertical and horizontal sanding tasks, including locking positions at 0° / 22.5° / 45° / 67.5° / 90° - Oscillating sanding belt For improved sanding quality and extended belt life - Quick-clamping system Enables fast and easy belt replacement - Sanding pad with graphite coating Reduces friction and increases sanding belt lifespan - Height-adjustable cast iron worktable With T-slot, spring-assisted for smooth adjustment - Lateral sanding drum device For sanding curves and radii Klodex E Uh Tjpfx Ah Nel - Continuously adjustable mitre fence - Two extraction ports Ø 100 mm

Condition: new, maximum load weight: 33,570 kg, overall weight: 39,500 kg, axle configuration: 3 axles, loading space length: 12,450 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, DOLL 3-axle semi-trailer LOGO 12 * Front wall made of fine-grain steel sheet, designed in accordance with DIN EN 12642 Code L * Welded steel chequered plate cover * 3 single axles, SAF brand, 9 t Intradisc CD disc brakes * 1st axle as lift axle * Air suspension with lifting and lowering via rotary slide valve * Manually operated landing gear * 8 x DOLL Mammut bunks and stakes * 385/65 R 22.5 tyres on steel rims * LED tail lights with integrated triangular reflectors * 4x LED work lights (1,800 lumens) * RAL 9011 graphite black (frame + bunks), RAL 3002 carmine red (stakes) * COC document Various bolt-on accessories such as toolbox, additional support leg, and access ladder are available at extra cost. Further information available upon request. Kledpfjx Egtljx Ah Nol Illustrations may differ from the original. Information provided without liability. Contact: Niclas Lott Tel.:

Condition: excellent (used), Year of construction: 2023, S3Y310 BAND FILTER SYSTEM INCLUDING CHIP CONVEYOR BMF-BÜRENER - Coolant tank: 600 litres - Dimensions (LxWxH): 1100x1100x800 mm - Filtration capacity: 150 l/min with emulsion - Average outlet fineness: approx. 60-40 µm - 2x screw spindle pumps MTS20-40 Kledpoxv Dbhsfx Ah Njl Delivery pressure: 25 bar Flow rate: approx. 24 l/min Power: 3 kW - 2x submersible pumps SPK2-23/15 (rinsing) Delivery pressure: 4.3 bar Flow rate: approx. 35 l/min Power: 0.75 kW - 1 roll of filter paper - 1 unit hinged belt chip conveyor with pre-filtration, lifting tank and lifting pump (Flow rate approx. 170 l/min) - Coating: Graphite grey RAL7024 Year of manufacture: 2023

Condition: used, mileage: 235,530 km, power: 324 kW (440.52 HP), first registration: 04/2011, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 05/2026, color: green, gearing type: mechanical, emission class: euro5, total width: 2,550 mm, total height: 3,650 mm, Year of construction: 2011, Equipment: ABS, air conditioning, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ MAN TGS 28.440 6x2-2 BL Wiedemann SUPER 1000 - available upon request Internal No. #515 Chassis * MAN * TGS 26.440 * 6x2-2 BL * 440 HP / 324 kW * EURO 5 * MAN transmission shifting * N-drive NMV 221 * 4,200 + 1,350 mm wheelbase * Parabolic front springs 9.5t * Rear air suspension for high center of gravity * 400 liter fuel tank + 60 liter AdBlue tank * 385/55 R 22.5 STEER-AXLE TL 160&K * 315/70 R 22.5 DRIVE-AXLE TL 154/150&K * 385/55 R 22.5 STEER-AXLE TL 160&K * Chassis color RAL 9011 graphite black * Halogen beacon lights * “M” cab, 2,240 mm wide, 1,880 mm long * Air conditioning * Reversing camera Superstructure * Wiedemann enviro tec * Super 1000 8.0/4.0 water recycling * 12,000 liter tank capacity * 4,000 liter clean water chamber * 8,000 liter waste water chamber * Discharge by tipping the tank, 45° Vacuum system Kljdpfx Aewu Syxjh Nel * Wiedemann & Reichhardt KW 3000 * 3,000 cbm/h 80 kW * Piping DN 150 * Approx. 25 m suction hose DN 125 * Suction tube DN 125 High-pressure system * Uraca P 3-45 407 liters / at 175 bar * High-pressure hose reel for approx. 180 m DN 32 with automatic retraction * Hydraulic flushing hose reel with approx. 60 m DN 13 Features * Sludge tank made from material 1.4301 * Suction and HP (high pressure) boom * Hot hand-washing unit * Stainless steel toolbox * Operator cabinet with display * NMV - start controllable from operator cabinet * Remote control * Equipment cabinet with flaps * Hose storage * Extended sound insulation for pump compartment * LED work lights Technical data * Unladen weight 18,080 kg * GVW 28,000 kg * Length 10,900 mm * Height 3,650 mm * Width 2,550 mm For further detailed information and/or photos, please contact us directly. A wide range of other vehicles for SALE or RENT can be found at: Specifications subject to change, prior sale, and errors excepted. The buyer is obliged to independently verify the condition and features of the goods. Sale is exclusively under our terms and conditions and with exclusion of any warranty.

Condition: used, mileage: 21,000 km, power: 346 kW (470.43 HP), first registration: 05/2021, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: mechanical, emission class: euro6, total width: 2,550 mm, total height: 3,650 mm, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal number: #129 MAN TGS 28.470 6x2-2 BL Wiedemann SUPER 2000 – available upon request Chassis * MAN * TGS 28.470 * 6x2-2 BL * 4 * 470 HP/346 kW * EURO 6 * Engine D2676LF52 * MAN Tronic transmission control MAN Comfort Shift ZF 16 S 252 OD * N-drive NMV 221 f=0.98 /drive flange 150 mm for NMV 8-hole * 3,900 + 1,350 mm wheelbase * Front suspension: parabolic 9.5t * Rear suspension: air for high center of gravity * 400-liter fuel tank + 60-liter AdBlue tank * 385/55 R 22.5 STEER-AXLE TL 160&K * 315/70 R 22.5 DRIVE-AXLE TL 154/150&K * 385/55 R 22.5 STEER-AXLE TL 160&K * Chassis color RAL 9011 graphite black * Cab color RAL 2004 deep orange * Halogen beacons * “M” cab 2,240 mm wide 1,880 mm long * Air conditioning * MAN Media Navigation Package / video function via USB/SD / 7” color display / MAN Camera View / AUX-in / USB / Comfort hands-free for 2 mobile phones Body * Wiedemann enviro tec * Super 2000 8.0/6.0 water recycling * 14,000-liter tank * 6,000 liters fresh water * 8,000 liters waste water * Discharge by tilting the tank 45° Vacuum System * Wiedemann & Reichhardt KW 3000 * 3,000cbm/h 80kW * Piping galvanized, DN 150 * Approx. 25m suction hose DN 125 * Suction pipe DN 125 with channel spatula * Silencer High-Pressure System * Uraca P3-45 65, 406 liters at 175 bar * Hydraulic high-pressure hose reel with approx. 180m HP hose DN 32 with automatic rewind * Hydraulic high-pressure hose reel with approx. 80m HP hose DN 13 with automatic rewind Additional fresh water system Kledpfjvh H Hhsx Ah Nol * Speck NP 25/50-150, 50 l/min at 150 bar * Spring-loaded reel with 15m pressure hose DN10 Special features * Sludge tank made of material 1.4301 * Suction and HP boom * 20-liter hand washing unit (heated) * Stainless steel toolbox * Control cabinet with display * Engine – start can be controlled from control cabinet * NMV – start can be controlled from control cabinet * Radio remote control with display * Equipment cabinet with two flaps – access on both sides * Hose tray * High sound insulation of pump compartment * LED worklights * Central lubrication system Technical data * Unladen weight 18,500 KG * Permissible GVW 28,000 KG * Length 10,400 mm * Height 3,650 mm * Width 2,550 mm For further detailed information and/or photos, please contact us directly. You will find a wide range of further vehicles available for PURCHASE or RENT on our website: Subject to changes, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale exclusively according to our terms and conditions and under exclusion of any warranty.

Condition: used, mileage: 3,500 km, power: 166 kW (225.70 HP), first registration: 06/2024, fuel type: electric, overall weight: 16,000 kg, axle configuration: 2 axles, next inspection (TÜV): 06/2025, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,000 mm, Year of construction: 2024, Equipment: ABS, electronic stability program (ESP), ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ BUY ++ VOLVO FL Electric 4x2 BUCHER CityFlex C40e Vacuum and flush combi Chassis * Volvo * FL Electric * 4x2 * Fully electric chassis * Battery 265 kWh (600V DC) * Peak power up to 400 Kw * Max. 850 Nm power take-off electrohydraulic * Comfort cab * Air suspension * Chassis color RAL 9011 graphite black * LED rotating beacons * Air conditioning * Reversing camera Body * BUCHER municipal * CityFlex C40e * 4,000 liter tank size * Flexible division of sludge and water chamber volume by the piston * Emptying by hydraulic discharge piston Vacuum system * CVS RSL 400 * 5,750 l/min. with free passage Kedjvh H Nijpfx Ah Nell * Pipeline in DN 80 * approx. 15 m suction hose cassette with boom * Transport reel on the side for max. 40 m DN 80 High pressure system * Uraca P 3-10 104 liters/ at 200 bar * High-pressure reel with approx. 80 m DN 19 and 50 m DN 13 with manual reeling device * Swiveling * Digital hose length measuring device Special features * Sludge tank made of S265 material * Suction hose boom * Warm hand washing device * Toolbox with roller shutters and shelves * Control cabinet with display (IFM CAN) * Remote control * Equipment cabinet * Hose storage * LED work lights * Vice * Pylon holder Technical data * Unladen weight 11,205 KG * 16,000 KG GGW * Length 7,130 mm * Height 3,000 mm * Width 2,550 mm For more detailed information and/or pictures, please contact us directly. You can find a large selection of other vehicles to BUY or RENT under: Subject to changes, prior sale and errors excepted. The buyer is obliged to independently check the condition and equipment of the goods. The sale is subject exclusively to our general terms and conditions and to the exclusion of any warranty. The vehicle offered is eligible for the environmental bonus as financial support for buyers of electric vehicles according to the list of eligible electric vehicles, available on the BAFA website. The vehicle offered is eligible for the environmental bonus as financial support for buyers of electric vehicles in accordance with the list of eligible electric vehicles available on the BAFA website. The vehicle offered is eligible for the environmental bonus as financial support for buyers of electric vehicles in accordance with the list of eligible electric vehicles available on the BAFA website.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 400 kW (543.85 HP), Ore Beneficiation Plant for Nickel, Copper, Zinc, Graphite, Gold, Silver, Chrome, Quartz/Silica In today’s competitive mining and metallurgical industry, maximizing ore value is critical. Our state-of-the-art Ore Beneficiation Plant offers a complete solution designed to increase the content and quality of raw ore, transforming it into a marketable product ready for further processing or direct sale. Engineered for a wide range of minerals—including nickel, copper, zinc, graphite, gold, silver, chrome, and quartz/silica—our ore beneficiation plant delivers exceptional performance, efficiency, and reliability. Introduction Mining operations around the world face the challenge of processing ores that are often low in grade and require extensive refinement to be economically viable. Beneficiation—the process of increasing the concentration of valuable minerals—plays a vital role in reducing operational costs, enhancing recovery, and ultimately, ensuring profitability. Our ore beneficiation plant, also known as an ore processing plant or mine dressing plant, integrates advanced technology and robust engineering to deliver an efficient crushing, grinding, classifying, and separation process. Designed to handle a wide variety of ores, our plant is the ideal solution for mining companies looking to optimize their extraction and processing operations. Whether you’re processing nickel, copper, zinc, graphite, gold, silver, chrome, or quartz/silica, our plant provides the versatility and performance needed to meet today’s rigorous industrial standards. ## What Is an Ore Beneficiation Plant? Kjdpfxeq Nw Uqs Ah Nsll An ore beneficiation plant is a facility where raw ore is processed to improve its quality and increase the concentration of valuable minerals. The plant typically includes several stages of processing: 1. Crushing: The raw ore is reduced in size to allow for more efficient downstream processing. 2. Grinding: Further size reduction to liberate the valuable minerals from the waste material. 3. Classifying: Separation of the ore into different size fractions using screening and hydrocyclones. 4. Separation: Employing various physical processes such as magnetic separation, flotation, or gravity separation to concentrate the valuable minerals. 5. Dewatering: Removal of excess water to prepare the concentrate for further processing or shipping. This integrated process not only boosts the metal content but also minimizes waste, thereby improving overall cost efficiency and environmental sustainability.

Condition: reconditioned (used), Year of construction: 2023, All wear parts new only 704 operating hours Special price for a low-hour demonstration unit Base machine: €29,990 net Optional extras (for an additional charge): - Cooling unit: €3,995 net - Emulsion tray: €3,990 net The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are distinguished by their robust construction, ensuring consistent briquette quality during continuous operation. The pressing process does not require any binding agents – compaction is achieved solely through hydraulic pressing force. Depending on material, the feedstock volume can be reduced by up to 90%. Throughput capacity: maximum 70 kg/h (depending on material) Briquette diameter: Ø 50 mm Motor: 5.5 kW 400 Volt / 50 Hz / 3-phase Pump: 40 liters Maximum briquette length: 50 mm Optimal briquette length: 40 mm Silo diameter: 1,000 mm Oil tank: 110 liters Dimensions: 1750 x 1130 x 1100 mm (L x W x H) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Fill level sensor: yes Feed material requirements: - Max. chip length: 15 mm Klodpfx Ajd N Dnheh Njl - Installation room temperature: heated space, at least +5°C - Max. load on agitator: 150 kg - Feed material must be free from magnetic metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may otherwise occur.

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, AGIETRON Hyperspark 2 HS Year of manufacture: 2006 Travel paths: X = 350 mm, Y = 250 mm, Z = 350 mm Max. workpiece dimensions (L x W x H): 650 x 580 x 250 mm or 820 x 420 x 250 mm Max. workpiece weight: 400 kg Kljdpfxsxt H Nco Ah Nsl Distance from table to quill: 170–520 mm Quill with automatic chuck of your choice (Erowa / 3R Systems) Without electrode changer – robot available on request Work tank is lowerable for optimal accessibility Incl. C-axis for rotation, indexing, and EDM (U = 0–60 rpm) AGIE IPG high-performance generator with 72 A Material removal rate copper/steel: 450 mm³/min Material removal rate graphite/steel: 530 mm³/min Best achievable surface finish Ra 0.2 µm Net machine weight: 3,200 kg Machine dimensions (L x W x H): 2,689 x 1,855 x 2,593 mm The machine is in stock with us and has already been cleaned, serviced, and tested. We are happy to perform an individual test for you as well. Including 6-month warranty on spare parts We can also offer you on-site commissioning and operator training. Optional: Transport, chiller, oil, clamping devices

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 800 kg, total height: 2,965 mm, total width: 2,135 mm, total length: 2,855 mm, quill stroke: 500 mm, workpiece length (max.): 880 mm, workpiece width (max.): 680 mm, workpiece height (max.): 350 mm, overall weight: 3,900 kg, Sinker EDM Machine AGIE Impact 3 Year of manufacture: 2003 Kedpoxt H Irofx Ah Noll Travel paths (X/Y/Z): 500 x 350 x 500 mm Max. workpiece dimensions: 1070 x 530 x 350 mm or 880 x 680 x 350 mm Max. workpiece weight: 800 kg Internal dimensions of work tank: 1090 x 730 x 490 mm Programmable fluid level: 0-390 mm Including C-axis with 0-60 RPM Max. electrode weight on C-axis: 50 kg Without electrode changer Average discharge current: 72 Amps Material removal rate copper-steel: 450 mm³/min Material removal rate graphite-steel: 530 mm³/min Machine dimensions: 2855 x 2135 x 2965 mm Machine weight: 3900 kg The machine is in stock, has been cleaned, overhauled and tested. We are happy to perform a custom test for you and advise you regarding your application. We also offer commissioning and warranty upon request.

Condition: excellent (used), Standing desk – lectern – high table and shelf. With slanted shelf in graphite grey: 480×570 cm. Total height: 110 cm Width: 52.5 cm Depth: 52.5 cm Additional shelf (74.5 cm × 74.5 cm). Height can be adjusted freely. 2 levels with short (8 cm high) elements 2 levels, each 23.5 cm high 1 level, 33.5 cm In very good condition, also suitable for use as a shelf. Scope as shown. Shipping possible (also disassembled). Ksdpfxoxyirgs Ah Nsll

Condition: excellent (used), Standing desk – lectern – high table and shelf. With slanted shelf in graphite grey: 480×570 cm. Total height: 110 cm Width: 52.5 cm Depth: 52.5 cm Additional shelf (74.5 cm × 74.5 cm). Height can be adjusted freely. 2 levels with short (8 cm high) elements Kljdpfexyiq Aex Ah Nol 2 levels, each 23.5 cm high 1 level, 33.5 cm In very good condition, also suitable for use as a shelf. Scope as shown. Shipping possible (also disassembled).

Year of construction: 2001, condition: like new (used), Double-aggregate grinder, two lower aggregates 2 x7.5 kW main power, 4 kW feed, lifting and lowering 2 kW, the machine after renovation, conveyor belt in very good condition. New graphite shoe. The machine has two aggregates from the bottom, contact rollers rubber first shaft second Combi system with graphite runner. Working width 630 mm. Two feed speeds slower faster. Length of grinding belt 1900 mm. Pneumatic oscillation. Tensioning the belts pneumatically. Speed of grinding belt 18 m / s. grinding shoes 1. Declaration of conformity CE power 21 kW nominal whole. Machining height 160 mm. Maszyan has two lower working shafts. Transport tape top system. Klsdpfx Ahjfxpbme Nel

Condition: as good as new (ex-display), Year of construction: 2023, Technical data PDM100R-5393 Capacity [Tm] 100 DIMENSIONS OF THE BOTTOM PLATE [mm] 900x600 DIMENSIONS OF TOP PLATE [mm] 850x550 GUIDING COLUMNS (x4) [Ø mm] 50 WORKING HEIGHT [mm] 950 MAX. OPENING [mm] 600 STROKE [mm] 420 FREE RUNNING SPEED [mm/s] 50-230 Kljdpfx Asq Ula Reh Njl WORKING SPEED [mm/s] 2-15 WEIGHT [kg] 3000 SERVO POWER - PDM100R The new SERVO hydraulic units from Bosch Rexroth are designed to increase productivity and reduce productivity and reduce energy consumption by up to 80 during downtime, tool changes and between cycles. cycles. Increased efficiency in operation! EQUIPMENT - Proportional p/Q control with SvP5020 from Bosch Rexroth - Adjustable speed values on PLC. - AOPD light barrier technology - 12" LCD display - Configurable working parameters on PLC. - 50 pre-stored programs available on PLC. - Prefilled valves for fast speeds - Maintenance-free bronze graphite bushes. - Simplified hydraulic unit to reduce maintenance maintenance work.

Condition: new, Year of construction: 2024, working width: 950 mm min. workpiece height: 4 mm Klsdpfxjknyhle Ah Nol max. workpiece height: 170 mm height adjustment: electrically read out height: digital electronic control: Fox 500 KTR aggregates: 1 1. aggregat: Combination unit for calibrating and sanding / Slant-grooved steel roller Ø 120 mm with height fine adjustment / Hard sanding pad with graphite pad dust brush: no motor power: 7,5 kW suction connection: 140 mm machine length: 1388 mm machine width: 1545 mm machine height: 1668 mm weight: 660 kg

Condition: new, Year of construction: 2023, working width: 1100 mm min. workpiece height: 4 mm max. workpiece height: 170 mm Klodpfsirmg Uex Ah Nol height adjustment: electrically workpiece thickness display: digital aggregates: 2 1. aggregat: angular grooved steel roller Ø 120 mm, fine adjustment for calibration, pneumatic on/off of the roller 2. Aggregat: Combination unit with finely adjustable working height for calibrating and fine grinding: rubber-coated roller Ø 120 mm (45 Sh), hard grinding shoe with graphite coating on replaceable insert and pneumatic on/off of roller Link grinding shoe: elastic, sector distance 56 Electronic control: FOX 500 KTR dust brush: no motor power: 15 kW suction connection: 2 x 140 mm machine length: 1650 mm machine width: 1820 mm machine height: 1960 mm weight: 1170 kg

Condition: new, mileage: 400 km, power: 345 kW (469.07 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, soot filter, Vehicle: MAN TGS 26.470 6x4H-4 BL CH HydroDrive Vehicle Type: Flatbed truck and chassis, suitable for crane installation Chassis Color: Pure white RAL 9010 Cab Color: Graphite black RAL 9011 Engine Type: MAN D2676 LF85 Power: 346 kW (470 HP) Torque: 2,400 Nm Emissions standard: Euro 6d Transmission MAN TipMatic 12-speed automatic Reinforced single-plate clutch (430 mm) Drive modes: Efficiency, Manoeuvre, Idle Speed Driving, Rocking Chassis Wheelbase: 3,900 mm Rear overhang: 1,950 mm Main axle distance (between rear and trailing axle): 1,350 mm Frame height above cab: up to 4,000 mm Frame longitudinal member thickness: 8 mm Frame end: straight Axles Front axle: 9,200 kg, steered, HydroDrive without through drive Rear axle: 13,000 kg, HY axle, non-steered, non-driven Trailing axle: 9,000 kg, steered, liftable, non-driven Axle ratio: i = 3.70 Air Suspension Electronically controlled air suspension (ECAS) on trailing axle Automatic level control Spring load capacities: FA 9,500 kg / RA 13,000 kg / TA 8,000 kg Brakes Electronic Braking System (EBS) ABS, ASR High-performance engine brake MAN EVBec (multi-stage) Disc brakes on all axles Electronic parking brake Tyres and Rims Front axle: 385/55 R22.5, steel rims 11.75x22.5 Rear axle: Goodyear 315/70 R22.5, steel rims 9.00x22.5 Trailing axle: Michelin 315/70 R22.5, Alcoa matte Cab Type: FN, flexible, narrow, standard height Comfort seats: air-suspended, heated, with armrest Multifunction steering wheel Central locking Climatronic air conditioning Lower comfort bed Storage in seat console and storage boxes Interior styling: Moon Grey Sun blinds, tilting roof Various storage compartments USB ports LED lighting technology Permissible Loads Gross vehicle weight: 26,000 kg Axle loads: FA 9,000 kg / RA 11,500 kg / TA 7,500 kg Permissible trailer weight: max. 30,000 kg Tanks Fuel tank: 400 l AdBlue tank: 60 l Assistance Systems ESP, ASR, cruise control Emergency braking assistant Lane departure warning Digital tachograph Advanced navigation system (7 inch) MAN SmartSelect Body Interface Prepared for crane installation Trailer coupling: RINGFEDER type 4040G150A Various electrical and pneumatic connections Special Features HydroDrive: Hydraulic front axle drive for increased traction Driver comfort features Factory interfaces and preparations for municipal, construction, and special-purpose applications as well as flexible bodies ---- FASSI Loader Crane F545RA.2 xe-dynamic Base Unit Type: F545RA.2 xe-dynamic CE Directive EN 12999 HD5S2 compliant Color: RAL 3020 traffic red, cylinders black Slew Range Continuous rotation Hydraulics Kedpfx Aexwrblsh Njll Double-acting hydraulic cylinders Piston rods hard-chromed Kinematics Double linkage system with PROLINK Articulated arm can be over-extended up to 15° Overload Protection Electronic overload cut-off FX500 FSC stability control LMB II Emergency stop and visual warning Valves & Filters Pressure relief and load-holding valves High-pressure filter Separate hydraulic tank 180 l with filter and oil cooler at the base Control FASSI radio remote control RCH/RCS Pressure value display Danfoss D850 control block with 4 control valves Emergency control Stabilizers Hydraulically extendable on both sides Stabilizer spread: 7.79 m Speed Control Dynamic Control

Condition: new, mileage: 400 km, power: 345 kW (469.07 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, soot filter, Vehicle: MAN TGS 26.470 6x4H-4 BL CH HydroDrive Vehicle Type: Flatbed truck and chassis, suitable for crane installation Chassis Color: Pure white RAL 9010 Cab Color: Graphite black RAL 9011 Engine Type: MAN D2676 LF85 Power: 346 kW (470 HP) Torque: 2,400 Nm Emissions standard: Euro 6d Transmission MAN TipMatic 12-speed automatic Reinforced single-plate clutch (430 mm) Drive modes: Efficiency, Manoeuvre, Idle Speed Driving, Rocking Kledpfx Aexwra Ioh Nsl Chassis Wheelbase: 3,900 mm Rear overhang: 1,950 mm Main axle distance (between rear and trailing axle): 1,350 mm Frame height above cab: up to 4,000 mm Frame longitudinal member thickness: 8 mm Frame end: straight Axles Front axle: 9,200 kg, steered, HydroDrive without through drive Rear axle: 13,000 kg, HY axle, non-steered, non-driven Trailing axle: 9,000 kg, steered, liftable, non-driven Axle ratio: i = 3.70 Air Suspension Electronically controlled air suspension (ECAS) on trailing axle Automatic level control Spring load capacities: FA 9,500 kg / RA 13,000 kg / TA 8,000 kg Brakes Electronic Braking System (EBS) ABS, ASR High-performance engine brake MAN EVBec (multi-stage) Disc brakes on all axles Electronic parking brake Tyres and Rims Front axle: 385/55 R22.5, steel rims 11.75x22.5 Rear axle: Goodyear 315/70 R22.5, steel rims 9.00x22.5 Trailing axle: Michelin 315/70 R22.5, Alcoa matte Cab Type: FN, flexible, narrow, standard height Comfort seats: air-suspended, heated, with armrest Multifunction steering wheel Central locking Climatronic air conditioning Lower comfort bed Storage in seat console and storage boxes Interior styling: Moon Grey Sun blinds, tilting roof Various storage compartments USB ports LED lighting technology Permissible Loads Gross vehicle weight: 26,000 kg Axle loads: FA 9,000 kg / RA 11,500 kg / TA 7,500 kg Permissible trailer weight: max. 30,000 kg Tanks Fuel tank: 400 l AdBlue tank: 60 l Assistance Systems ESP, ASR, cruise control Emergency braking assistant Lane departure warning Digital tachograph Advanced navigation system (7 inch) MAN SmartSelect Body Interface Prepared for crane installation Trailer coupling: RINGFEDER type 4040G150A Various electrical and pneumatic connections Special Features HydroDrive: Hydraulic front axle drive for increased traction Driver comfort features Factory interfaces and preparations for municipal, construction, and special-purpose applications as well as flexible bodies ---- FASSI Loader Crane F545RA.2 xe-dynamic Base Unit Type: F545RA.2 xe-dynamic CE Directive EN 12999 HD5S2 compliant Color: RAL 3020 traffic red, cylinders black Slew Range Continuous rotation Hydraulics Double-acting hydraulic cylinders Piston rods hard-chromed Kinematics Double linkage system with PROLINK Articulated arm can be over-extended up to 15° Overload Protection Electronic overload cut-off FX500 FSC stability control LMB II Emergency stop and visual warning Valves & Filters Pressure relief and load-holding valves High-pressure filter Separate hydraulic tank 180 l with filter and oil cooler at the base Control FASSI radio remote control RCH/RCS Pressure value display Danfoss D850 control block with 4 control valves Emergency control Stabilizers Hydraulically extendable on both sides Stabilizer spread: 7.79 m Speed Control Dynamic Control

Condition: new, mileage: 400 km, power: 345 kW (469.07 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle: MAN TGS 26.470 6x4H-4 BL CH HydroDrive Vehicle Type: Platform truck and chassis, suitable for crane installation Chassis Color: Pure White RAL 9010 Cab Color: Graphite Black RAL 9011 Engine Type: MAN D2676 LF85 Power: 346 kW (470 hp) Torque: 2,400 Nm Emission Standard: Euro 6d Transmission MAN TipMatic 12-speed automatic Reinforced single-disc clutch (430 mm) Driving Modes: Efficiency, Manoeuvre, Idle Speed Driving, Rock-Free Chassis Wheelbase: 3,900 mm Rear overhang: 1,950 mm Main axle spacing (between rear and trailing axle): 1,350 mm Frame height above cab: up to 4,000 mm Frame rail thickness: 8 mm Frame end: straight Axles Front axle: 9,200 kg, steered, HydroDrive without through drive Rear axle: 13,000 kg, HY axle, non-steered, non-driven Trailing axle: 9,000 kg, steered, liftable, non-driven Axle ratio: i = 3.70 Air Suspension Electronically controlled air suspension (ECAS) on trailing axle Automatic leveling control Spring load capacity: FA 9,500 kg / RA 13,000 kg / TA 8,000 kg Brakes Electronic Braking System (EBS) ABS, ASR High-performance engine brake MAN EVBec (adjustable) Disc brakes on all axles Electronic parking brake Tyres & Rims Front axle: 385/55 R22.5, steel rims 11.75x22.5 Rear axle: Goodyear 315/70 R22.5, steel rims 9.00x22.5 Trailing axle: Michelin 315/70 R22.5, Alcoa matte finish Cab Type: FN, flexible, narrow, standard height Comfort seats: air-suspended, seat heating, armrest Multifunction steering wheel Central locking Climatronic air conditioning Lower comfort bed Storage in seat console and storage compartments Interior styling: Moon Grey Sun blinds, tilting roof Various storage solutions USB sockets LED lighting technology Permissible Loads Gross vehicle weight: 26,000 kg Axle loads: FA 9,000 kg / RA 11,500 kg / TA 7,500 kg Technical trailer load: max. 30,000 kg Klsdexwra Uopfx Ah Nol Tanks Fuel tank: 400 l AdBlue tank: 60 l Assistance Systems ESP, ASR, cruise control Emergency brake assist Lane departure warning Digital tachograph Advanced navigation system (7-inch) MAN SmartSelect Body Interfaces Prepared for crane installation Trailer coupling: RINGFEDER type 4040G150A Various electrical and pneumatic connections Special Features HydroDrive: hydraulic front-axle drive for increased traction Driver comfort features Factory interfaces and preparations for municipal, construction, and government applications as well as flexible body solutions ---- FASSI Loader Crane F545RA.2 xe-dynamic Base Unit Type: F545RA.2 xe-dynamic CE Directive EN 12999 HD5S2 compliant Colour: RAL 3020 traffic red, cylinders black Slewing Range Infinitely rotatable Hydraulics Double-acting hydraulic cylinders Piston rods hard-chromed Linkage System Double linkage system with PROLINK Articulated arm can be overextended up to 15° Overload Protection Electronic overload shutdown FX500 FSC stability control LMB II Emergency stop and visual alarm Valves & Filters Pressure relief and load-holding valves High-pressure filter Separate hydraulic tank 180 l with filter and oil cooler at base Control FASSI radio remote control RCH/RCS Pressure value display Danfoss D850 control block with 4 control valves Emergency operation Stabilizers Hydraulically extendable on both sides Support width: 7.79 m Speed Control Dynamic Control – load-dependent Additional Articulated Boom / Jib Type: L214 4x hydraulically extendable up to 10.30 m

Condition: refurbished (used), Year of construction: 2008, machine/vehicle number: D 2319867, overall weight: 176 kg, total length: 930 mm, total width: 550 mm, total height: 450 mm, volume flow: 129 m³/h, operating pressure: 1,500 bar, power: 6.7 kW (9.11 HP), input frequency: 50 Hz, rotational speed (max.): 1,740 rpm, Dry-running positive displacement pump for low pressure, from Becker, type KDT 3.140/0-400, built in 2008. The rotary vane compressor uses self-lubricating vanes made of a graphite composite material and requires only minimal maintenance and no oil change. For further details see type plates / files. Packaging and loading included. Ksdetpgxzepfx Ah Njll

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: D 2402263, overall weight: 176 kg, total length: 930 mm, total width: 550 mm, total height: 450 mm, volume flow: 129 m³/h, operating pressure: 1,500 bar, power: 6.7 kW (9.11 HP), input frequency: 50 Hz, rotational speed (max.): 1,740 rpm, Dry-running positive displacement pump for low pressure, from Becker, type KDT 3.140/0-400, built in 2009. Kodpstp Tklsfx Ah Noll The rotary vane compressor uses self-lubricating vanes made of a graphite composite material and requires only minimal maintenance and no oil change. For further details see type plates / files. Packaging and loading included.