Used Gomaco Ghp 2800 for sale (3,096)

Condition: used, Hydraulic Synchronizing Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Upright opening (side): 650 mm Table surface: 1560 x 1010 mm Ram surface: 1560 x 1010 mm Ram stroke: 575 mm Hsdpfx Afjwva I Heisfn Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. installation height: 775 mm Table height above floor: 1000 mm Guide column Ø: 140 mm Clamping pin bore in ram: 64 mm Pressing speed: 0 to 10 mm/s, stepless Return speed: 0 to 20 mm/s, stepless Main motor power: 22 kW Control pump motor power: 5.5 kW Connection: 400 Volts, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision synchronization control - Stepless electronic stroke limitation (top and bottom with digital travel measurement and position display) - Mechanical safety support device (prevents ram from dropping due to dead weight) - Single-hand and two-hand operation - Electrical tool safety via signal contact - Pressure presetting independent of stroke (via keypad, digital pressure display) - Travel measurement system right and left via rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swiveling display - Stroke movement and press force adjustable via joystick - Adjacent hydraulic power unit with electrical cabinet - Hydraulic draw cushion under the press table - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required by press (upright) L x W x H: 1800 x 1010 x 3470 mm Space required for horizontal transport L x W x H: 3500 x 1800 x 1200 mm Net weight press: 13 tons Space for hydraulic power unit L x W x H: 1000 x 800 x 3040 mm Net weight hydraulic power unit: approx. 1 ton The machine was used as a tool trial press in a toolmaking workshop. Very good condition.

Condition: like new (used), Year of construction: 2021, operating hours: 300 h, Prices against bid XG x 2800 5x Ca E200L 4x CA Dc 40 e Hfsdpsr Rddzofx Afien System was only used for 90 days as good as new The XG-X2800LJ is a 2D/3D laser profile sensor from the LJ-V7000 series from KEYENCE Germany. This advanced vision system offers advanced features and flexibility for demanding inspection applications. Here is some important information about the XG-X2800LJ: Technical specifications: Laser scanner / profile measurement: the XG-X2800LJ is specifically designed for profile measurement and 2D/3D image processing. Compatibility: It is compatible with line scan cameras, LJ-V sensors and 21 megapixel cameras12. Flowchart style programming: The XG-X is designed for advanced users and allows flowchart style programming3. Manuals and software: User manuals and software are available for configuration and customization via PC as well as remote control and capture of images and results on a PC4. Please note that the accessories shown are for illustrative purposes only and may not be included with the product. For more information, please visit the official KEYENCE website.1 If you have any further questions or need support, please do not hesitate to contact me! 😊

Condition: new, Year of construction: 2015, Factory-new machine, has only been used for test runs, condition is as new. TECHNICAL DESCRIPTION The DIGIT MAGGI throughfeed drilling machine is an automatic multi-spindle throughfeed drilling machine equipped with 2 horizontal heads and 6 vertical heads, designed for high-volume production. TECHNICAL SPECIFICATIONS Number of horizontal heads: 2 Number of vertical heads: 6 Minimum distance between vertical heads: 165 mm Minimum distance between horizontal heads: 320 mm Hfodpfjxd Ruwex Afisn Distance between spindles: 32 mm Number of spindles in horizontal head (left red - right black): 23 (11 - 12) Number of spindles in vertical head (left red - right black): 11 (5 - 6) Maximum vertical drilling depth: 55 mm Maximum horizontal drilling depth: 65 mm Maximum workpiece dimensions: 2800 x 870 x 50 mm Minimum workpiece dimensions: 250 x 150 x 12 mm Number of motors: 12 Horizontal head motor power: 2 HP (1.5 kW) Vertical head motor power: 1.5 HP (1.1 kW) Number of clamps: 10 Loader feed speed: 57 m/min Working air pressure: 6–8 bar Standard air consumption: 60 l/cycle Maximum clamp height above worktable: 75 mm Overall dimensions: 4150 x 1600 x 1800 mm Worktable height: 950 mm Packaging dimensions: 4300 x 1950 x height 1900 mm

Condition: good (used), Electric motor, three-phase motor, electric motor for pressure blowers -Electric motor: for pressure blower or other use -Power: 2.3 kW Hfodpoxb R Daofx Afion -Speed: 2800 rpm -Shaft: Ø 19 x 40 mm -Design: B5 -Dimensions: 365/273/H273 mm -Weight: 18 kg

Condition: used, Air Compressor + Air Dryer Set Brands: WORTHINGTON CREYSSENSAC / DONALDSON Model: RLR 200V G8 400V RG IT / DV 2800 AP Compressor data: max bar: 9.50 Weight: 3000Kg Hfsdpfx Aoururpefion Power: 132kW Electric current (V/Ph/Hz): 400 / 3 / 50 min -1: 2655 Dryer Data: Compressed air: PS: 16bar TSL: 2°C TSH: 70°C 4.3 KW 12.58 A Tube: 100mm

Condition: ready for operation (used), Year of construction: 2004, Additional Equipment Light barrier safety device Safety-oriented electric control Swing-up protective gratings Guide light as cut indicator Telescreen positioning control Fast table drive with swinging and drawing motion of knives Simultaneous cuts of top and bottom knife Automatic course of table, pressure bar, and knife movement Intermittent operation of low noise drives precision hydraulic with 2 pressure stages and high-quality valves This Josting ZFS 2800 veneer guillotine was manufactured in 2004. It features a cutting length of 2810 mm and an insertion height of 80 mm, suitable for a cutting range of 20 - 470 mm. Equipped with a light barrier safety device, swing-up protective gratings, and a telescreen positioning control for enhanced operational safety and precision. Consider the opportunity to buy this Josting ZFS 2800 veneer guillotine. Contact us for more information about this machine. Hfedpfxsw S N I Ho Afisn Application Types Veneering

Condition: ready for operation (used), Year of construction: 1998, Crossfeed Veneer Splicing Machine / Veneer Composer in Crossfeed Operation Manufacturer: Fisher Rückle Model: Delta FZX 28 Delta + RVP / BS completely equipped with: - Intermediate conveyor - Edge reinforcement and trimming unit - Stacking device with lifting table Hfedpfx Aew Tlktsfijn Maximum veneer strip length: 2800 mm Veneer strip thickness: approx. 0.4 – 1.5 mm (depending on veneer type) Veneer strip width: approx. 70 – 600 mm (crosswise to the grain direction) Adhesive types: urea-based or PVAC-based This machine enables you to join veneer sheets crosswise using glue (PVAC or urea). It is necessary that the veneer sheets are pre-glued. The machine guarantees excellent joints of any type of veneer. Gluing is performed by a system of hydraulic cylinders applying horizontal pressure, which ensures tight, gap-free joins along the entire length. The machine’s heavy-duty, robust design guarantees longevity and reliable operation. Operation is simple and intuitive thanks to a clearly laid out control panel. Separate manometers provide the operator with direct access to the pressures for the heating plates, the horizontal pressing system, etc., allowing for quick changeover times. The machine’s upper traverse can be raised to allow easy and rapid access to the heating plates for cleaning and maintenance.

Condition: good (used), Year of construction: 1980, functionality: fully functional, working width: 2,800 mm, Vacuum feeder. 2x flexo printing from above. Anilox rollers. Motorized slotter, year 1995. Para cardboard loader. The machine is in good condition. Possibility to inspect the machine in operation until 20.9.25. Hfsdpew Tiiyofx Afion

Condition: new, Year of construction: 2024, operating hours: 1 h, Claas Liner 2800 TREND New machine, year of manufacture 2023 - Twin-rotor rake for central swath placement - Hitch attachment to lower links, Cat. II - Drive 540 rpm - Working width 7.40 m – 8.20 m (with swath curtain 7.50 m – 8.20 m), hydraulically infinitely adjustable (with flow divider) - 2 swath rotors, each with 3.50 m diameter - 12 tine arms per rotor - 4 double spring tines per tine arm - CLAAS silage tines Ø 9.5 mm, angled downward by 10° - Rotor chassis with 16x6.50-8 tyres Hodow S Rbhepfx Afiefn - Integrated tine loss protection - Foldable protection bar - Warning plates with lighting - Transport dimensions: height 3.99 m (with tine arms), width 2.97 m - Hydraulic requirements: 1 single-acting and 1 double-acting circuit - Weight: approx. 2,220 kg | Internal no.: 11181107

Condition: used, Used pallet racking extension section - 2860 x 1070 x 5500 mm with 3 shelves - 3200 kg load capacity (per shelf). Hfodpjwprzfjfx Afion Suitable for heavy storage - durable, flexible and robust. Expand your pallet storage effortlessly with this sturdy extension section. Manufactured from high-quality hot-dip galvanized steel, which not only

Condition: used, Conveyor belt, belt conveyor, belt conveyor, belt conveyor MFP Fördertechnik Machine No: 20083 Year of manufacture: 2021 Usable length: 2800 mm Belt width: 360 mm Usable width: 300 mm Belt length: approx. 5800 mm Frame profile construction height: 70 mm Deflection roller diameter: 20 mm Belt speed: 10 m/min to 48 m/min Conveyor belt height: approx. 1150 mm Motor power: 140 Watt Power supply: 230 Volt, 50 Hz - Stepless belt speed via potentiometer on ROFRE frequency converter, type 897 - Right-left run - Belt drive via INTERROLL tube motor - Stable steel sheet construction with closed steel plate under the conveyor belt - 1 piece height-adjustable substructure with hand crank, conveyor belt height approx. 1000 to 1200 mm - Substructure mounted on steel plate length 500 mm x width 500 mm x thickness 30 mm - 1 piece fixed support foot without height adjustment as transport support - Fully mobile on fixed castors Overall dimensions L x W x H: 2880 x 500 x 1150 mm Weight: 200 kg Hfedowqg Enopfx Afisn good condition

Condition: ready for operation (used), Year of construction: 2013, operating hours: 42,970 h, General Data Measurements width 7000 mm Measurements depth 8960 mm Measurements height 5000 mm Machine weight 55000 kg Control Unit Brand HEIDENHAIN Main Drive Spindle speed range 6000 Spindle motor power 63 kW Number of axis 5 Movement Hfodpfx Afew Nb Hcjijn X-Axis Movement 3900 mm Y-Axis Movement 2940 mm Z-Axis Movement 1100 mm Workpiece Workpiece weight 9000 kg Additional Equipment Operating mode 3 RMP 60 3D measuring probes, Renishaw 2 handguns Work area lights HR 410 electric handwheel, Heidenhain Collision monitoring system, type: CMS, Brankamp This 5-axis AXA VPC 2800-U gantry milling machine was manufactured in 2013. It features a robust spindle speed range of 30 – 6000 rpm, a powerful main spindle drive of 140 kW, and a large rotary table with a diameter of 2800 mm. The machine includes a tool changer and is equipped with a high-torque drive capable of handling significant loads. If you are looking to get high-quality milling capabilities, consider the AXA VPC 2800-U machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2010, operating hours: 36,000 h, functionality: fully functional, machine/vehicle number: 1234, overall weight: 24,000 kg, total length: 6,445 mm, total width: 2,925 mm, Technical specifications: • Drive: 2 × 160 kW (ABB) • Dimensions: approx. 6,445 × 2,925 × 3,111 mm • Weight: approx. 24,000 kg • Infeed opening: 2,825 × 2,030 mm • Rotor: length approx. 2,805 mm, speed approx. 355 rpm, 80 knives • Screens: 20 - 60 mm, manual replacement Design advantages: • Single-stage, efficient belt drive • Convenient hydraulic pusher for continuous operation • Quick service access to rotor and cutting chamber • Safety system protecting the drive • Adjustable granulation thanks to easy screen change • Fourfold usable knives – spare parts savings Hjdpfx Afsw R U Upjijfn Location: Trzebinia (Poland) – inspection possible.

Condition: excellent (used), Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines -Drum: Ø 198 mm Hfjdpfx Ajb A I I Dsfijn -Drum length: 465 mm -Speed: 2800 rpm -Power: 5.5 kW -Shaft mount: Ø 32 mm -other sizes also available in stock -Number: 14 engines available -Price per piece -Weight: 87 kg

Condition: used, Year of construction: 2001, machine/vehicle number: Z 293 - 040, For sale: used Raster Zeulenroda GHP 400 H/K-08 with a nominal force of 2x2000kN. Total weight: 32 tons. Rated current: 80A. Year of manufacture: 2001. Available from 08/2025. Hfedpfowzkgwjx Afion

Condition: ready for operation (used), Air dryer,Donaldson 4,3 kW, Used Machine Dimensions: Length: 900 mm Width: 1250 mm Height: 1720 mm Hfodpewvp Tlofx Afijn Manufacturer: Donaldson Model: DV 2800 AP Refrigerant: R134a | 6.5 kg Electrical data: 380 V; 4.3 kW; 12.58 A

Condition: excellent (used), Goodway GA-2800 CNC Lathe, 3 Jaw Chuck, Tailstock, Toolarm, Year 2007 Hodjwx Hqmspfx Afiofn Swing diameter: 580 mm; Swing over saddle: 400 mm Turnable diameter: up to 350 mm; standard chucks 203 mm (8″) or 254 mm (10″) Turning length options: 260 mm (C), 575 mm (M), 1,155 mm (LM) Bar capacity: Ø 75 mm Workpiece weight: up to 250 kg X/Z travels: 205 mm / up to 1,230 mm; rapids X=20 m/min, Z=24 m/min Spindle: Bore Ø 90 mm through-spindle Speed range 35–3,500 rpm 11 kW continuous power (15 kW peak) Spindle torque: approx. 325 N·m (30 min) Guideways: Hardened, ground box ways for rigidity Turret: 12-station AC-servo indexing Tailstock: Programmable quill & base, taper MT‑4, 70 mm quill, 150 mm travel control: FANUC Oi‑TC

Condition: ready for operation (used), Okuma OPUS 5000 GHP Power Supply 5000T SN: 00198 , serial no. according to photo ,used, normal signs of wear, 100% functional Hfsdpoi Ecarjfx Afisn

Condition: excellent (used), Electric motor, three-phase motor Hedpfx Afov Hyb Aoisfn -Manufacturer: Elektrim, electric motor type Sh 80X-2C -Power: 1.5 kW -Speed: 2800 rpm -Shaft: Ø 19 x 40 mm -Height of shaft axis: 80 mm -Design: B3 -Protection class: IP 55 -Dimensions: 310/160/H200 mm -Weight: 11.5 kg

Condition: excellent (used), Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines -Drum: Ø 194 mm -Drum length: 460 mm -Speed: 2800 rpm -Power: 4.4 kW -Shaft mount: Ø 30 mm -other sizes also available in stock -Weight: 74 kg Hjdob A I I Hepfx Afisfn

Condition: excellent (used), Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines -Drum: Ø 199 mm -Drum length: 384 mm Hjdob A I Iyepfx Afiofn -Speed: 2800 rpm -Power: 2.2 kW -Shaft mount: Ø 30 mm -other sizes also available in stock -Weight: 67 kg

Condition: excellent (used), Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines -Drum: Ø 176 mm -Drum length: 430 mm -Speed: 2800 rpm -Power: 3 kW -Shaft mount: Ø 28 mm -other sizes also available in stock Hsdpfsb A I Ixsx Afiofn -Weight: 50 kg

Condition: good (used), Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines -Drum: Ø 192 mm -Drum length: 465 mm -Speed: 2800 rpm -Power: 4.4 kW -Shaft mount: Ø 30/60 mm -other sizes also available in stock Hjdpfx Asb A I I Ajfiefn -Number: several engines available -Weight: 70 kg

Condition: good (used), Motor roller, drum motor, belt sander, belt grinder Hfodpfsb A I Izjx Afien -Spare part for: EHEMANN grinding machines -Drum: Ø 184 mm -Drum length: 460 mm -Speed: 2800 rpm -Power: 4.4 kW -Shaft mount: Ø 30 mm -other sizes also available in stock -Weight: 70 kg

Condition: excellent (used), Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines Hfsdpfx Aeb A I I Esfisn -Drum: Ø 196 mm -Drum length: 465 mm -Speed: 2800 rpm -Power: 4.4 kW -Shaft mount: Ø 30 mm -other sizes also available in stock -Weight: 78 kg