Used Golf Course Maintenance for sale (6,860)

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 7,300 h, load capacity: 15,000 kg, lifting height: 5,000 mm, free lift: 2,500 mm, fuel type: diesel, mast type: duplex, construction height: 4,145 mm, fork carriage width: 2,540 mm, empty load weight: 23,300 kg, total length: 5,455 mm, drive type: Diesel, construction width: 2,540 mm, Diesel Forklift Load Center of Gravity: 1200 Mast Type: Duplex Condition: Ready for use and fully functional Technical Condition: Very good Front Tire Type: Pneumatic Front Tire Size: 12.00-20 Rear Tire Type: Pneumatic Rear Tire Size: 12.00-20 Description: In addition to this Konecranes model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Hire-purchase and financing at favorable conditions are always available. We are also happy to purchase your used forklift, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this SMV15-1200C. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and above. We would also be happy to display your vehicle for consignment sale. Crane arm Heating, full cab, full free lift, Gijdpfx Aov Uttbscwsr

Condition: used, functionality: fully functional, Year of construction: 2006, load capacity: 45,000 kg, empty load weight: 4,200 kg, total length: 10,000 mm, Accessories Gijdpfx Acju Dzv Howjr Mast type: None Condition: Ready for use and fully functional Technical condition: very good Description: In addition to this --make-- model, we have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail on this --make type-- P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment.

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 6,496 h, load capacity: 2,500 kg, lifting height: 6,540 mm, free lift: 2,000 mm, fuel type: gas, mast type: triplex, construction height: 2,780 mm, fork carriage width: 1,440 mm, fork length: 1,200 mm, empty load weight: 6,200 kg, total length: 1,580 mm, drive type: Treibgas, construction width: 1,540 mm, Four-way sideloader Load center of gravity: 600 Fork width: 125 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Bandages Giodpeu Dyzuefx Acwjr Front tires size: 22x10x16 non-marking Rear tires Type: tires Rear tires size: 16x7x10,5 non-marking Description: In addition to this Combilift model, we have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are possible for us at any time. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this C2500CB P.S.: Our forklift master workshop is specialized in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment. Sideshift, heating, full cab, full free lift,

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 8,504 h, load capacity: 5,000 kg, lifting height: 6,320 mm, free lift: 2,010 mm, fuel type: gas, mast type: triplex, construction height: 2,950 mm, fork carriage width: 1,460 mm, fork length: 1,400 mm, empty load weight: 7,980 kg, total length: 4,650 mm, drive type: Treibgas, construction width: 2,260 mm, Sideloader Load center of gravity: 700 Fork width: 180 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 27x10-12 Rear tires Type: Superelastic Gsdpfsvimh Usx Acwjir Rear tires size: 27x10-12 Description: In addition to this jumbo model, we have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are possible for us at any time. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this JGQN 50/14/70TV P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on commission. Heating, full cab, full free lift, Platform height: 820 mm

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 12,668 h, load capacity: 5,000 kg, lifting height: 5,980 mm, free lift: 1,990 mm, fuel type: electric, mast type: triplex, construction height: 2,970 mm, fork carriage width: 1,500 mm, fork length: 1,600 mm, empty load weight: 11,770 kg, total length: 5,340 mm, drive type: Elektro, construction width: 2,530 mm, Electric Sideload Forklift Load Center: 800 mm Fork Width: 200 mm Fork Thickness: 50 mm Mast Type: Triplex Condition: Ready for operation and fully functional Technical Condition: Very good Front Tyre Type: Pneumatic Front Tyre Size: 3.00-15 Giedpfx Acoyriwzewjr Rear Tyre Type: Pneumatic Rear Tyre Size: 3.00-15 Battery Voltage: 80V Battery Capacity: 1250Ah Battery Year: 2024 Description: In addition to this Baumann model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders available at our Hamburg and Gdansk warehouses. Visit our website – sago-online. Leasing and financing under attractive conditions are always available. We also buy your used equipment outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this EGX50/16/60TR model. P.S.: Our master forklift workshop specialises in repair, maintenance, refurbishment, and custom builds for forklifts from 8 tons and up. We are also happy to offer your vehicle on a consignment basis. Fork Positioner, Fork Positioner Opening Range: 560 / 1440 mm Heater, Full Cabin, Full Free Lift, Platform Height: 1020 mm

Condition: new, Year of construction: 2026, Cone Crusher: Types, Features, and Applications Cone crushers are essential equipment in the mining, construction, and aggregate industries. They are designed to crush hard and medium-hard materials such as granite, basalt, iron ore, and limestone into smaller, uniform sizes. This article explores the different types of cone crushers, including spring cone crushers, compound cone crushers, and Symons cone crushers, and provides insights into choosing the right cone crusher for sale. What Is a Cone Crusher? A cone crusher is a compression-type machine that reduces material size by squeezing it between a moving piece of steel (the mantle) and a stationary piece (the concave). The material is crushed as it moves downward through the chamber, achieving fine and uniform output. Cone crushers are widely used in secondary, tertiary, and fine crushing stages. Spring Cone Crusher The spring cone crusher is one of the earliest and most traditional types of cone crushers. It uses a spring system to protect the crusher from damage when uncrushable materials enter the chamber. Key features include: Reliable structure and low maintenance Gjdpfxoq Nd Nds Acwoir Adjustable discharge size for different crushing requirements Overload protection through the spring safety system Suitable for medium and fine crushing of various ores and rocks Spring cone crushers are ideal for small to medium-scale operations that require stable performance and cost efficiency. Compound Cone Crusher The compound cone crusher, also known as the combination cone crusher, integrates the advantages of both spring and hydraulic cone crushers. It features a robust design and high crushing efficiency. Main characteristics include: High crushing ratio and uniform product size Hydraulic cleaning system for easy maintenance Strong adaptability to different materials and production conditions Energy-efficient operation This type of cone crusher is widely used in mining, metallurgy, construction, and chemical industries, offering a balance between performance and affordability. Symons Cone Crusher The Symons cone crusher is a classic model that has been used for decades in the mining and aggregate industries. It is known for its simple structure, reliable performance, and high productivity. Key advantages include: Stable operation and long service life Uniform particle size distribution Easy adjustment of the discharge opening Low operating cost Symons cone crushers are available in several models, including 3ft, 4ft, 4¼ft, 5½ft, and 7ft, to meet different capacity requirements. Cone Crusher for Sale When selecting a cone crusher for sale, several factors should be considered: Material hardness and abrasiveness – Choose a crusher designed for the specific material type. Production capacity – Match the crusher size and power to the required output. Automation and control systems – Modern cone crushers offer hydraulic and PLC systems for easier operation. After-sales service and spare parts availability – Reliable support ensures long-term performance. Henan Mingyuan Heavy Industrial Equipment Co., LTD offers a wide range of cone crushers, including spring, compound, and Symons models. Each machine is built with high-quality materials and advanced technology to ensure efficient and durable performance.

Condition: used, Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine Gijdexacdvopfx Acwor - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Year of construction: 2023, operating hours: 770 h, condition: ready for operation (used), Wood production line manufactured in 2023. This ISM ATM-01 is a custom-made automatic production line designed for the fully automated manufacturing of wooden garden screens from individual planks. It features automatic discharge and stacking of finished screens, tilting stacks for efficient processing, and is adjustable for five different screen types. If you are looking to get high-quality wood processing capabilities, consider the ISM ATM-01 machine we have for sale. Contact us for further details. • Type: Automatic production line for wooden garden screens (custom-made) • Process: Manual loading of planks and intermediate slats into magazines; fully automatic production thereafter • Features: • Automatic discharge and stacking of finished screens • Tilting stacks for efficient processing Gijdoy Am Awjpfx Acwsr • Adjustable for 5 different screen types • Last maintenance: June 2025 • Documentation: User manual, spare parts list, technical drawings, CE dossier

Condition: excellent (used), color: orange, lifting height: 25,500 mm, Year of construction: 2007, operating hours: 9,654 h, Drivetrain Make of engine: Volvo Weights Empty weight: 18.000 kg Functional Lifting capacity: 25.000 kg CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Latest inspection: 2025-12-16 Production country: IT Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks Godpfx Acsy Amyvjwjir = Remarks = Ecopower MGI 25 Telescopic Crane * 2007 * 9,654 operating hours * Diesel drive * 4x4x4 steering * Pick and Carry function up to 9,500 kg * 25,000 kg lifting capacity * 18,000 kg own weight * equipped with you * TUV inspection valid until December 2026 * TCVT inspection valid until December 2027 * Agricultural vehicle 25KM * Includes maintenance history and documents

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,100 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,250 mm, controller manufacturer: SIEMENS, controller model: 840D, total height: 4,000 mm, total width: 6,000 mm, table load: 1,500 kg, overall weight: 12,000 kg, spindle speed (max.): 5,500 rpm, number of slots in tool magazine: 240, tool weight: 60,000 g, product length (max.): 6,000 mm, number of axes: 4, This 4-axis BW MCX750 M2 was manufactured in 2011. It features a substantial X-axis travel of 1100 mm, Y-axis travel of 900 mm, and Z-axis travel of 1250 mm. The machine has a maximum pallet load of 1500 kg and a magazine capacity of 240 positions. If you are looking to get high-quality machining capabilities, consider the BW MCX750 M2 horizontal machining centre we have for sale. Contact us for further details. • Maintenance contract: Yes • Utilization: 70% • Shifts: 2 • Number of revolvers/magazines: 1 • Magazine capacity: 240 positions • Pallet size: 800 x 800 mm • Drive power: 50 kW • Maximum torque: 1650 Nm • Maximum tool length: 750 mm • Maximum tool diameter: 350 mm Giedpfjy Amhmsx Acwsr Additional equipment • Tooling available (approx.): • Group 1: 700–750 tools (Ø up to 124.9 mm) • Group 2: 100–150 tools (Ø 125–224.9 mm) • Group 3: 50 tools (Ø 225–350 mm) Technical Specification Taper Size SK 50

Condition: ready for operation (used), Year of construction: 2006, operating hours: 27,713 h, travel distance X-axis: 1,100 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,250 mm, controller manufacturer: SIEMENS, controller model: 840D, total height: 4,000 mm, total width: 6,000 mm, table load: 1,500 kg, overall weight: 12,000 kg, spindle speed (max.): 7,500 rpm, spindle motor power: 7,500,000 W, number of slots in tool magazine: 144, tool weight: 60,000 g, product length (max.): 6,000 mm, number of axes: 4, This 4-axis BW MCX750 M1 was manufactured in 2006. It features an impressive X-axis travel of 1100 mm, Y-axis travel of 900 mm, and Z-axis travel of 1250 mm. The machine has a maximum pallet load of 1500 kg and a magazine capacity of 144 positions. If you are looking to get high-quality machining capabilities, consider the BW MCX750 M1 horizontal machining centre we have for sale. Contact us for further details. Gisdpfx Aey Amgiocwer • Maintenance contract: Yes • Utilization: 70% • Shifts: 2 • Pallet size: 800 x 800 mm • Drive power: 50 kW • Maximum torque: 1650 Nm • Number of revolvers/magazines: 1 • Magazine capacity: 144 positions • Maximum tool length: 750 mm • Maximum tool diameter: 350 mm • Operating hours: 27713 h Additional equipment • Tooling package included: • Group 1: approx. 700–750 tools (Ø up to 124.9 mm) • Group 2: approx. 100–150 tools (Ø 125–224.9 mm) • Group 3: approx. 50 tools (Ø 225–350 mm) Technical Specification Taper Size SK 50

Condition: ready for operation (used), Year of construction: 2010, operating hours: 32,760 h, travel distance X-axis: 1,500 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 660 mm, total height: 3,300 mm, total width: 5,800 mm, table load: 1,500 kg, overall weight: 11,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 48, tool weight: 8,000 g, product length (max.): 3,000 mm, number of axes: 3, This 3-axis Okuma MB66-VA was manufactured in 2010. It features a travel of 1500 mm on the X-axis, 660 mm on the Y-axis, and 660 mm on the Z-axis. The machine has a table size of 1530 x 660 mm and a maximum table load of 1500 kg. If you are looking to get high-quality machining capabilities, consider the Okuma MB66-VA vertical machining centre we have for sale. Contact us for further details. • Maintenance contract: yes • Condition: About 1.5 years ago, electrical maintenance was carried out by MP-Industrietechnik; electrical components were partially replaced or cleaned • Utilization: 70% • Shifts: 2 • Operating hours: 32,760 h • Control system: OSP-P200M • Table size: 1530 x 660 mm • 4th axis: possible (separately controlled) Gedpoy Ama Nsfx Acwsir • Spindle speeds: 8000 / 12000 / 15000 rpm • Magazine capacity: 20 standard (optional 32 or 48) • Number of revolvers/magazines: 1 • Max tool length: 300 mm • Max tool diameter: 125 mm Additional equipment • Zero-point clamping plate for table 1530 x 660 mm • Approx. 530 tools available (Hermle & Okuma MB66) Technical Specification Taper Size SK 40

Condition: used, functionality: fully functional, This offer is for a used ‘Canon imagePRESS C10000VP’ colour production system Item for sale: 1 x Canon imagePRESS C10000VP with the following specifications: Includes Fiery Server Pro Includes 1 x Paper Deck D1 Includes Stacker H1 Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 9,039,201 pages Colour: Approx. 7,444,138 pages Black: Approx. 1,595,063 pages Condition: This is a second-hand machine, which may show signs of use (minor scratches or yellowing). The machine has been tested for functionality Gsdpfoy Aly Iox Acwjir A test print can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Sea-worthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, functionality: fully functional, This listing is for a second-hand large-format printer/cutting plotter, the ‘Roland TrueVis VG3-640’ Item for sale: 1 x Roland TrueVis VG3-640 Condition: This listing is for a used device, which may show signs of wear (minor scratches or discolouration). The device has been tested for functionality A test print can be seen in the photo Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment! Sea-worthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. Godsy Alvijpfx Acweir For further information, you are of course welcome to contact us directly.

Condition: used, functionality: fully functional, This listing is for a second-hand DTF/DTG printer, the ‘Brother GTX-423 pro’ Item for sale: 1 x Brother GTX-423 pro with the following features: Includes Schulze KN-800 drying tunnel Includes Schulze Powder Machine 4050 Meter readings: Total: Approx. 4,121 pages Gsdpfx Aoy Aluljcweir Condition: This is a second-hand device, which may show signs of wear (minor scratches or discolouration). The machine has been tested for functionality A test printout can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment for this! Sea-worthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, functionality: fully functional, This offer is for a used ‘Ricoh Pro 8310’ black-and-white production system Item for sale: 1 x Ricoh Pro 8310 with the following specifications: Includes Vacuum Feed LCIT RT5120 Includes Finisher SR5110 Not the right configuration? We can easily configure the machine to your specifications. Please feel free to contact us! Meter readings: Total: Approx. 431,372 pages Condition: This is a used machine, which may show signs of wear (minor scratches or yellowing). The machine has been tested for functionality A test printout can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Sea-worthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. Gsdpfx Ajy Altbjcwoir For further information, you are of course welcome to contact us directly.

Condition: used, functionality: fully functional, This offer is for a used ‘Ricoh Pro C9200’ colour production system Item for sale: 1 x Ricoh Pro C9200 with the following specifications: incl. Fiery Controller E-46 incl. Vacuum Feed LCIT RT5120 incl. Stacker SK5040 incl. SR5050 finisher Gedpjy Alpiofx Acweir Not the right configuration? We can easily configure the machine to your specifications. Please feel free to contact us! Meter readings: Total: Approx. 12,985,706 pages Colour: Approx. 9,857,702 pages Black: Approx. 3,128,004 pages Condition: This is a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested for functionality A test print can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Sea-worthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: ready for operation (used), Year of construction: 2002, total height: 2,057 mm, total width: 2,667 mm, overall weight: 1,360 kg, product length (max.): 2,781 mm, Vertical honing machine manufactured in 2002. This Sunnen CK-21-CC features a maximum stroke of 0.3 m and a tool diameter range of Ø19.05 – 203.2 mm. The machine is in robust condition, with new maintenance and cleaning plans implemented. If you are looking to get high-quality honing capabilities, consider the Sunnen CK-21-CC machine we have for sale. Contact us for further details. • Utilization: 30% • Shifts: 1 • Number of tools: 1 • Number of revolvers/magazines: none • Priority: 2–3 • Condition: Machine is still in a very robust condition considering its age • Measures: Important spare part purchased (interface between machine and tool); new maintenance and cleaning plans implemented • Stroke rate: 40–100 strokes/min • Max stroke: 0.3 m Gjdpfx Aoy Alhrjcwoir • Max tool weight: 680 kg • Tool diameter range: Ø19.05–203.2 mm

Year of construction: 2004, condition: ready for operation (used), travel distance X-axis: 285 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: FANUC, controller model: 21i TB, overall weight: 4,000 kg, total width: 3,000 mm, total height: 2,500 mm, spindle motor power: 7,500 W, product length (max.): 3,500 mm, spindle speed (max.): 3,200 rpm, number of axes: 2, Cylindrical grinding machine manufactured in 2004. This STUDER S33 CNC features a Z-axis travel of 1000 mm and an X-axis travel of 285 mm. It is equipped with a grinding spindle diameter of 73 mm and can handle a maximum workpiece length of 1000 mm, with a weight capacity of 120 kg. If you are looking to get high-quality grinding capabilities, consider the STUDER S33 CNC machine we have for sale. Contact us for further details. • Utilization: 40% • Shifts: 2 • Priority: 3 • Number of tools: 1 • Condition: Condition is good for its age. Maintenance was carried out every 2 years by Studer. Relatively low operating hours for its age. • Grinding spindle diameter: 73 mm • Grinding wheel: Ø500 x 63 / Ø203 mm • Max workpiece length: 1000 mm • Max workpiece weight: 120 kg • Max workpiece diameter: 175 mm • Operating hours: 18,182.66 h Additional equipment • 9x flange • 1x Studer steady rest with protective cover Giedpsy Alfwjfx Acwsr

Condition: new, The AMIS twin-shaft shredder is equipped with a CNC-manufactured, heavy-duty grinding chamber that is fully bolted for easy maintenance. Both the machine housing and the bearings are protected by wear rings and plates. The geared motors drive the two hexagonal working shafts, which can be fitted with various interchangeable cutting discs. The two working shafts are mounted in large-sized SKF spherical roller bearings with lifetime lubrication. Optionally, an automatic, battery-powered continuous lubrication system for the main bearings can be installed. Special features The change of wear plates and scrapers does not require disassembly of the machine housing. Thanks to the horizontally split bearing plates, the rotors including the bearings can be inserted or removed from above in a very short time. This allows for quick and easy rotor changes with different cutting tools. The size of the grinding chamber can be modified with relatively little effort due to the bolted housing design. Motor configuration, gearbox size, installation position, and rotor speed can all be adjusted as required. Technical Data Cutting chamber: 600 x 1200 mm Number of cutting discs: 60 (made of Hardox) Cutting disc width: 19 mm Maximum cutting disc diameter: 295 mm Scrapers: 2 Drive power: 2x 15 kW, 400 V, 50 Hz Weight: 2,800 kg Electrical control The machine is operated via a modern Siemens S 7/1200 controller featuring an advanced 7-inch touchscreen display. Both geared motors are controlled depending on load, and feature a reversing operation. Three different control programs are available depending on the material and application. Options The machine can be tailored for a wide range of applications to meet customer requirements. A variety of options are available: Customized base frames Special hoppers Grinding unit with different tools/cutting discs (diameter, size, thickness, shape, material grade) Godpfx Aeyr Tlpscwsir Various drive power ratings Different gearbox sizes with variable speeds

Condition: new, machine/vehicle number: AMIS Kabelaufbereitung, System consisting of a granulator, sorting table for separating liberated plastic and copper granulate, extraction unit, and control cabinet. Each component is pre-assembled as a transportable element on base plates. Giedpfsyr Ti Ujx Acwjr Advantages of the compact system: low overall height, minimal space requirements, component arrangement designed for easy cleaning and maintenance, short installation time, and last but not least, attractive pricing.

Condition: new, In every economic and public sector calculation, waste transportation is a critical factor. Here, it is not so much the weight but rather the volume that matters. The continuously rising transport costs for this waste are becoming an increasing economic issue. Proper disposal of large quantities of polystyrene or packaging film is particularly important in the retail sector. The VOLUME REDUCER ensures a volume reduction of up to 80 percent at this point. Bottles of any type and size, e.g., sparkling wine bottles, can be shredded effortlessly without the need for a compression mechanism. It is also possible to unpack expired food products. Furthermore, reject items such as pharmaceuticals, data carriers, or counterfeit products can be rendered unusable. Food residues and organic waste, including bones, can be shredded, collected, and converted into electricity and heat in biogas plants using the VR60. Consider, for example, a reverse vending machine for deposit bottles. PET bottles are compressed and held under lock and key until collection due to the presence of a barcode. By using the VOLUME REDUCER, the barcodes on PET bottles could be made unrecognizable, thereby achieving significant volume reduction. The shredded bottles could then be collected in a large container, eliminating the need for daily collection at return points. The shredder's vertically moving, wear-free blades ensure a quiet and clog-free operation. ALL ADVANTAGES AT A GLANCE - Non-rotating shredder - No material entanglement thanks to non-rotating blades - Automatic feed through blade movement - Automatic reversing V-shaped blades prevent jamming or blockage - Fast component change thanks to modular system - Intelligent control via compact logic system (PLC) - One-button operation - Optional material discharge via conveyor belt - Shredder module can be integrated into existing systems Gsdpfoyr I H Ujx Acwoir - Low blade wear and maintenance costs due to highly abrasion-resistant steel with a nominal hardness of 600 HBW VR60 IN DETAIL - Dimensions: 90 cm x 70 cm x 85 cm - Weight: approx. 190 kg - Power consumption: 3 kW - Connection value: 400 V three-phase alternating current

Condition: new, machine/vehicle number: AMIS Brikettierpressen Typ ZBP 50, 60 und 70, AT A GLANCE: Variable container dimensions (customizable to customer requirements) Left- or right-hand configuration Hydraulics with separate oil tank All model series also available as “DUO” variants Godpfxeyr I Hus Acwsir Wood chips, sawdust, wood shavings, etc. are generated in all woodworking and industrial processing businesses. Every day, storage and transport costs for these materials are significant. Briquetting presses offer the ideal solution, as briquettes are easy and space-saving to store and transport. Additionally, the risk of spontaneous combustion is significantly reduced. Briquetting presses require little space, are robustly constructed, and equipped with low-maintenance technology. Whether wood, paper, biomass, foam, or polystyrene – the ZBP series briquettes any suitable material. With a throughput capacity of up to 35 – 130 kg/h, they are particularly suitable for small and medium-sized enterprises. Flexible installation options thanks to the availability of left- and right-hand designs. So start briquetting today!

Condition: new, machine/vehicle number: ZBP 30, The AMIS briquetting press type ZBP 30 produces 30 mm briquettes. These briquettes are ideal for combustion in wood gasifiers and smaller wood chip boilers or heating systems. Any material from a woodworking operation (shavings, dust, etc.) can be briquetted. Wood chips, sawdust, wood shavings, etc., are generated in all craft and industrial woodworking companies. These materials incur significant storage and transport costs on a daily basis. Briquetting presses offer an ideal solution by compressing the material into briquettes, which are simple and space-saving to store and transport. Furthermore, the risk of spontaneous combustion is significantly reduced. Gjdsyr I Hnopfx Acwoir The briquetting presses require little space, feature sturdy construction, and are equipped with low-maintenance technology. Whether it is wood, paper, biomass, foam, or polystyrene, the ZBP can briquette all suitable materials. With a throughput of up to 35 – 130 kg/h, they are especially suited for small and medium-sized enterprises.

Year of construction: 2017, condition: used, functionality: fully functional, This is an SCC 61 WE electric combi-steamer from premium manufacturer Rational, year of manufacture 2017. The combi-steamer is a unit from the latest SCC series, featuring triple-glazed panels and LED lighting. The device has been inspected in our in-house workshop and is fully operational. The stand shown in the pictures is not included in the offer but can be purchased optionally. The pictures provided are sample images. Original photos will follow shortly. The list price (RRP) is €9,400 net. You will receive an invoice with VAT shown separately. Service: We are happy to assist you in arranging contact with a certified Rational customer service provider. Are you looking for a specific Rational unit? Contact us—we have access to a comprehensive range of new and used equipment. We are happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic or Pro. Our used equipment service for you: • 6-month warranty on all electrical parts, limited to replacement of defective parts (installation/removal costs not included) • High-quality branded equipment at fair prices • Professional refurbishment/inspection and cleaning • Inspected and fully operational—or your money back • Flexible shipping or self-collection • Competent advice before and after purchase • Provision of user manuals, wiring diagrams, and spare parts • DGUV V3 certification check This combi-steamer accommodates 5 x 400 x 600 mm trays. In automatic mode, the unit independently recognizes the optimal cooking path, item size, load quantity, and product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing). Technical data: • WxDxH: approx. 847 x 776 x 782 mm • Minimum door opening for transport WxH: 845 x 850 mm • Power supply: V: 400 / kW: 11 / Hz: 50/60 • Capacity: 6 x 1/1 GN • Weight: approx. 110 kg • Serial number: E61SI17012567044 • Year of manufacture: 2017 Condition: Used, inspected, fully functional Additional features: • In combi-steam mode, 3 operating modes are available: Steam (30°C to 130°C), Hot Air (30°C to 300°C), and Combination (30°C to 300°C) • Care Control – automatic cleaning • Core temperature probe • Spray hose with automatic retraction • 8.5-inch color display and touchscreen Gjdpfx Acsy Akfijwsir • 5 programmable fan speeds • Integrated, maintenance-free grease separation system • Automatic pre-selection of start times • 7 cleaning levels for unattended cleaning – including overnight cleaning • 3-stage adjustable steaming (30°C to 260°C) • 5 programmable proofing stages • USB interface • Seamless, hygienic cooking chamber with rounded corners • Halogen cooking chamber lighting Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain locations only by arrangement Subject to change and errors excepted. If you have questions, need advice, or would like to arrange a viewing, you can reach us by phone during our office hours: Monday to Friday 09:00–13:00 and 14:00–17:00. Sales are exclusively subject to our General Terms and Conditions (GTC).