Used Gleaner R 72 for sale (11,620)

Condition: new, functionality: fully functional, power: 18.5 kW (25.15 HP), gearing type: hydrostat, fuel type: diesel, color: blue, overall weight: 3,500 kg, empty load weight: 32,000 kg, operation weight: 3,210 kg, chain condition: 100 %, number of seats: 1, first registration: 09/2024, emission class: euro5, Year of construction: 2024, operating hours: 2 h, machine/vehicle number: B33, Equipment: additional headlights, adjustable boom, adjustable chassis, cabin, hammer hydraulics, rubber tracks, standard shovel, Our latest excavator the H&R B 33 The new version has a double-sided swivel arm and a transport weight of 3200 kg. It has a transport weight of 3200 kg, is 4.95 m long 0.98 / 1.5 m wide and 2.54 m high and has 2 travel speeds of approx. 4.5 km/h. The bucket is 0.4 m wide and has a capacity of 0.095 cbm and is equipped with a quick coupler. The Kubota D1505 engine has 18.5 KW and complies with the latest E-5 emission standard The excavator is also CE approved Optionally there is an auger and a demolition hammer or an adjustable humus bucket in different widths from 0.80m to 1.2m wide Spare parts are available from us. 2 years warranty and 1 year guarantee are of course included. Spare parts supply and service is guaranteed by us Financing with terms of 48-84 months is also possible. 28485,- net 5412,15 19 % 33897,15,-€ gross Kfsdpsulyglofx Affoa

Condition: ready for operation (used), Year of construction: 2005, Pallet changer TOOLPAL 3 R Kfodpjr Hnglefx Affja 12 compartment

Condition: excellent (used), functionality: fully functional, M&R Radicure convey Dryer. Fully functional and in good working condition. Dryer suitable for plastisol and water based prints. Kfsdpfx Aeulv A Neffsa

Condition: excellent (used), Year of construction: 2017, saw blade diameter: 600 mm, cutting height (max.): 200 mm, cutting width (max.): 800 mm, input voltage: 400 V, Technical specifications: - Maximum saw blade diameter: 600 mm - Saw blade holder: 35 mm - Cutting time per stroke: 4 sec. - Motor power: 7.5 kW - Saw shaft speed: 2800 rpm - Air consumption per cycle: 20 L - Working table height: 900 mm - Extraction nozzle: 2x120 mm, 1x100 mm - Operating pressure: 7 - 8 bar - Net weight: approx. 520 kg - Required air flow: 1000 m³ / h - Voltage: 400 V / 50 Hz three-phase Cutting capacity in mm: 30 x 800 50 x 765 140 x 600 180 x 340 200 x 200 Standard basic equipment: - Pneumatic feed for saw blade - Two-hand safety PLC control - Automatic motor brake - Set of operating spanners - Emergency stop button - Speed regulator for saw blade feed - Fixed vertical safety guard - Upper pneumatic safety pressure device (pneumatic safety cover) - Extraction speed at least 28 m / sec. Kedsw Aqndspfx Affjfa

Condition: new, B&r ps 794 power supply module Kfsdpfx Ash Ruldjffja b&r br-automation 2005 ps 794 0gh-ps794 5vdc 24vdc input: 230v ac, 0.4a 8-30vdc weight: 620 gm

Condition: reconditioned (used), Hako Jonas / Sweepmaster B 980 R Refurbished sweeper with complete lighting package with 6 months guarantee and new DGUV V3 test including test report. Working width with two side brushes: 120 cm Central sweeping roller: 70 cm Area performance max.: 5800 m²/h Container capacity: 60 l Drive type: battery Kfsdpfxer E D Dco Affoa Battery V/Ah: (24V) 4x 6V 240Ah GEL New parts installed / repairs carried out: - All drive belts new - All ball bearings new - GEL batteries new - Heavy-duty wheels new - All rubber strips new - Box filter new - Drive motor (roller and side brush) completely overhauled - Drive motor completely overhauled - Sweeping unit completely overhauled We also offer: Service, repair and sales for all common Hako models.

Condition: new, functionality: fully functional, maximum load weight: 3,000 kg, lifting power: 3,000 kg/m, Year of construction: 2025, Wood grapple for various forestry machines, farm loaders, wheel loaders, loaders, and other carrier vehicles (e.g.: H&R, JCB, Liebherr, Bobcat, Case, Kubota, Manitou, Schäffer, Zeppelin, etc.) The grapple has an opening width of approx. 1.2m. The rotator allows trunks to be rotated so that they can be picked up or put down precisely. The inclination is adjusted hydraulically so that it can be easily adjusted. Various mounting options are also available, e.g. Euro mounting, H&R standard mounting, etc. Individual adjustment is also possible. Other accessories for forestry machines, wheel loaders, etc. are also available from us. Please contact one of our trained consultants to receive an offer tailored to your needs. Kfedpfx Aovygigeffja We look forward to hearing from you! Your H&R GmbH

Condition: good (used), The following components from B&R Automation are for sale: - Power Panel 120 - CPU CP476 Kfedpfx Aert T Awoffsa Both were removed in 08/2022 and have worked without any problems to date.

Year of construction: 2001, condition: good (used), Kaeser BSD 72 compressor Kfodpfxjmnqkij Affja

Condition: used, Mobile chamber filter press plant, dewatering plant, sludge plant, second-hand Application: chamber filter press, mobile dewatering, transitional dewatering, Design: mobile 1200/103-30 REWA/R&B Machine no.: 17100-44 Filter plate format: 1200x1200 mm Number of plates: 103 Filter plates: PP Cake thickness: 30 mm Filter cloths: optionally available to match the medium Filter area: approx. 230 m² Press capacity: approx. 3550 dm3 Filter pressure: approx. 15 bar Plate transport: automatic Pump technology: optional Control cabinet: yes Ksdpfx Afernnt Ijfofa Discharge: by means of discharge screw Mounted: on semi-trailer Purchase or hire: Inspection of the systems by arrangement at our factory.

Condition: used, functionality: fully functional, The Quarti R shrink tank is an essential piece of equipment for vacuum packaging lines looking to optimize their shrinking efficiency. Made of high-quality stainless steel, it offers exceptional durability and resistance to demanding industrial conditions. Thanks to its rapid immersion principle, this tank allows for a perfect fit of the packaging around the product, ensuring a neat finish and optimal protection of the goods. Its large 800 x 600 mm immersion basket and a 250 mm bath depth ensure compatibility with a wide range of products, facilitating their integration into packaging processes. In addition, the bath temperature is adjustable, allowing precise control according to the requirements of different types of products, whether fragile or robust. The adjustable immersion time maximizes flexibility to meet the specific needs of each package. Mounted on casters, the Quarti R is easy to move, making its installation and integration into various configurations particularly practical. With this tank, companies can not only improve the appearance of their products, but also extend their shelf life by ensuring effective protection against external factors. Technical specifications: Immersion basket: 800 x 600 mm, ideal for large items Kfsdpfxou Ik S Ss Affja Bath depth: 250 mm for optimal immersion Temperature: Adjustable for precise adjustment Immersion time: Adjustable according to the product Material: Strong and durable stainless steel lh+RPdpN

Condition: like new (used), Year of construction: 2017, functionality: fully functional, input voltage: 380 V, Equipment: documentation/manual, M&R RADICURE D 36/6-4R little used, like new Kfsdpfewaa Tdjx Affsa

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: PL031303405S, For sale is a single unit consisting of a textile carousel with a matching conveyor dryer: M&R Sportsman EX 8/6 textile carousel, built in 2013 Total print count: 1,168,378 Diameter: 386 cm Weight: 1,497 kg Power supply: 380 V Pallets: Textile - 40 x 55 cm, 8 pieces Kfsdev Iy H Iopfx Affea Pockets - 30 x 40 cm, 8 pieces Sleeves - 15/12 x 40 cm, 8 pieces Squeegees: 6 x flood and 6 x pressure squeegees Screen fit with TRI-LOC M&R Radicure D 36/6-3 conveyor dryer, built in 2012 Conveyor width: 91 cm Drying channel length: 183 cm Total width: 127 cm Total length: 305cm Weight: 817kg Power supply: 380V Price negotiable

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 4-000-0175, MELETTI double winder type: DW 3200 R Machine no.: 4-000-0175 Year of construction: 1999 Kodjufgf Hjpfx Affefa Pipe diameter range: from ø 40 mm to ø 110 mm Coil width max. 1000 mm, core ø 800-2200 mm Opening and closing by hydraulic flap actuation Tailpipe pressing device. Right-hand operation Condition: overhauled Remark The double winder is my property Location: D-26345 Bockhorn-Grabstede-Germany

Condition: excellent (used), Type: Weiss WT3-340/70 Very good condition Weiss temperature cabinet with S!MCON / 32 control, air-cooled (refrigerant (R-404A) (can be converted to R452A on request) Test room capacity: approx. 335 liters Test room dimensions: height 750 mm, width 580 mm, depth 765 mm Kedpfev Edd Ssx Affofa External dimensions: height 1775 mm, width 870 mm, depth 1600 mm Data for operation: Test room lighting halogen bulb 24V, 50W Nominal voltage: 3/N / PE AC 400 V ± 10% 50 Hz Nominal current: 12.5 A Nominal power 4.1 kW Fuse provided by customer 16 A slow-blow Sound pressure level approx. measured at a distance of 1 m from the front. 1m height 58 dB(A) Data for temperature tests: Temperature range: -72 to +180 °C Temperature deviation over time in the middle of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K Temperature gradient (according to IEC 60068-3-5): 1 to 4 K Temperature change rate (according to IEC 60068-3-5) Heating: 3.0 K/min Cooling: 3.0 K/min Heat compensation max. 1500 W Refrigerant: R-404A / R-23 Weight: 585 kg For your safety as a buyer, the following information! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run with calibrated measuring devices. Condition: used / used Very good condition

Condition: used, Used Chamber Filter Press / Filter Press Rittershaus & Blecher R&B 800 x 800 Effective length: 3500 Number of chambers: 64 Filterpressure: 16 Bar Kjdpfx Afsbr Db Iofsfa Closed Pressure: min. 300 Bar, max. 320 Bar Filter surface per chamber: ca. 0,97 m² Filter surface: ca. 62 m² Volume of cake per chamber: ca. 11,19 Liter Volume of cake: ca. 716 Liter Plates: PP The machine is in good condition.

Condition: good (used), Year of construction: 2016, functionality: fully functional, ESC screen printing machine model 600 H/E, semi-automatic, print format max. 400 x 550 mm Precision printing machine with vertical frame lifting designed for high-quality, precise screen printing on foils, scales, circuits, panels, glass, etc. Standard equipment: - vertical frame lifting with pressure in the longitudinal direction from right to left - pneumatic drive, infinitely adjustable - hardened and ground guide shafts with ball guides - pneumatic maintenance unit - pneumatic squeegee head with fine adjustment and automatic, vertical lifting for screen changing and cleaning - flood squeegee device - individual function control for setup operation - individual cycle with operation via foot switch - automatic cycle via timer - modern, synchronized screen frame lifting - print path adjustment infinitely via limit switch - metal vacuum base plate with micrometric fine adjustment in x-y axis - central height adjustment of the Printing unit via trapezoidal thread spindles - stepless squeegee angle adjustment readable via scale - squeegee quick release fasteners - printing and flood squeegee separately adjustable via pressure regulator and readable via pressure gauge Technical data model 600 H/E: Vacuum plate: 500 x 700 mm max. printing format: 400 x 550 mm max. printing material height: 8 mm max. frame format: 600 x 850 mm micrometric fine adjustment: ± 10 mm air consumption: 11.3 I electrical connection: 110V/5A 230V/3.5A max. cycle performance: 1200 p/h Dimensions: Width: 1000 mm Depth: 800 mm Height: 1700 mm Packaging dimensions: 1000 x 880 x 1860 mm Net weight: 250 kg Gross weight: 375 kg • two printing squeegees - length according to customer specifications • two flood squeegees - length according to customer specifications Powder Machine 4050 The Powder Machine was specially developed for the easy powdering of DTF transfers. The continuously adjustable film holders allow films up to 40 x 50 cm to be processed. The thermal powder is evenly distributed on the film with one hand. Thanks to the vibration, the excess thermal powder is removed from the film. The thermal powder only sticks to the printed areas. With the Powder Machine you always achieve the optimal application of thermal powder for your transfers. Technical data: Dimensions: 79 x 42 x 64 cm Operating voltage: 230 VAC Power: 35 W Max. format: 40 x 50 cm Time setting: 0 - 3 seconds Volume: less than 70 dB (A) Net weight: 27.5 kg Shipping weight: 44 kg Ksdpevvwbfefx Affsfa M&R Economax II small dryer

Condition: good (used), functionality: fully functional, Mazak tool holders for sale Total 72 pieces suitable for Mazak QT-QTN 100/100M/100MS/100MSY 12D SQT 100/100M/100MS/100MSY 12D QT-QTN 200/200M/200MS/200MSY 16D SQT 10/10M/10MS/10MSY SQT 20/20M/20MS/20MSY 16D SQT 15 QT-QTN 150 ? 27x rotary holder 5x original Mazak 22X IVO/Heimatec 24x boring bar holder 3x original Mazak 21x IVOHeimatec 21 pieces can also be used for solid drills or boring bars with IK 4x solid drill holder 1x original Mazak 3x IVO/Heimatec 2x rotary holder 90 degrees original Mazak 7x driven tools axial 1x original Mazak 6x IVO/Heimatec 6x driven tools radial 2x original Mazak 4x IVO/Heimatec 2x driven tools swivel head ± 90° adjustable 2x Heimatec Price €8000 The price is net, excluding shipping Tel 0031 499570179 or 0031 629011138 Mgr Arno Kfjdpfxsvn Inao Affsa

Condition: new, Technical data of the grating: Manufacturer: Gi-Ro Vreden Condition of the goods: new (unassembled) Reason for return: wrong order end customer The scope of delivery includes: 01x pressed grate, new (unassembled) Material color: hot-dip galvanized Total depth: 1,000 mm (bearing bar direction) Total width: 980 mm (cross bar direction) Ksdpek Ebq Tofx Affofa bearing bar dim.: 35/1,7 mm S355JR TS anti-slip: no QS anti-slip: no edging: T-profile 35 mm Mesh size: 90 x 50 mm Weight: approx. 9,35 kg | pcs. Internal designation: R

Condition: used, machine/vehicle number: 008106, Max. panel width: 900 mm Max. panel length: 2500 mm Panel return for edgebander: Right Ksdjw Idg Nspfx Affsfa

Condition: good (used), Code: 0327 Brand: SCM Model: R/9 Router with automatic copying device for producing wooden elements, templates, chairs, contours, mirrors, special profiles Automatic copying device: Roller drive system (one movable and one fixed, coaxial with the tool) that automatically advances the workpieces, placed over a template Distance between spindle and column mm 915 Spindle vertical stroke mm 110 Table vertical stroke mm 200 Max distance between table and spindle mm 310 Conical connection MK 2 Rotation speed 10000/20000 rpm Motor Hp 5,5 Table dimension mm 900 x 750 Kodpfxex Ig S As Affefa Compressed air 6 bar Overall dimensions mm 1300 x 1650 x 1650 h Weight kg 680 MACHINE NOT RECONDITIONED , SEEN AND LIKED UNDER THE CONDITION IN WHICH IT IS FOUND , WITHOUT ANY WARRANTY

Condition: ready for operation (used), SEW Eurodrive PSE311 / R / EK04 + CM71S / TF / RH1M / SM50 servo motor with gearbox, SN011229434704000308 ,used, small traces of use, 100% functional, scope of supply according to photos Kodpfxoi D N Rfe Affefa

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) with 5 axis (X-Y-Z-C-5th) for routering, boring, cutting and edge banding Numerical Control ICOS CNC (IMAWOP) Max useful working area (without edge banding) mm 4000 x 1600 (2000) x 100 (axe Z stroke mm 650) Max useful working area (edge banding process) mm 4000 x 1600 x 100 (panel thickness) No. 8 movable rails (supports) length mm 1400, LED displaying both the axe X and axe Y position Vacuum cups (with No. 2 vacuum pumps, capacity 140 m3/h each) Safety side metal grids and front emergency carpets Motorized belt to evacuate the wastes from the working process No. 1 Vertical Electro-spindle ROBOTKOPF HSK F63 (Kw 16) Automatic Tools Changing System, with 18 folds (places) Kfodpfx Asw A Ruqjffoa No. 21 Independent vertical boring spindles (4 x Kw 1,2) No. 8 Independent horizontal boring spindles (4 in X + 4 in Y) Circular Saw (tiltable 0°- 90°) diam. (mm) 200 Glueing Unit (P.U.R. Glue + Quick Melt unit 283.203) VT 100 / 100 WITH 45° INCLINED EDGE BANDING UNIT Edge coils supporting unit (No. 2 reels) OPTIONALS: No. 1 Aggregate Flush Milling / Trimming No. 1 Aggregate Flush-Trimming / Profile Scraping Unit

Condition: excellent (used), machine/vehicle number: XLER4X20005301262, mileage: 915,285 km, power: 309 kW (420.12 HP), first registration: 09/2012, fuel type: diesel, tire condition: 50 %, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, total length: 6,000 mm, total width: 2,500 mm, total height: 4,000 mm, Year of construction: 2012, Equipment: ABS, air conditioning, differential lock, electric window regulation, fog lights, power mirror, retarder, spoiler, = Additional options and accessories = - 2 fuel tanks - 2 sleeping places - Airbag - Armrest - Disc brakes - Front suspension: Leaf - High sleeping cabin - Radio - Radio/Cassette player - Rear suspension: Air - Roof Spoiler - Sleeper cabin - Sper - Spoilers = More information = Tyre profile: 50% Brakes: disc brakes Front axle: Steering; Suspension: leaf suspension Rear axle: Double wheels; Differential lock; Suspension: air suspension Kfedpfx Afsx Igyajfja Technical condition: very good Visual appearance: very good

Condition: used, machine/vehicle number: 008324, Max. panel width: 1000 mm Max. panel length: 2500 mm Length of conveyor: 7000 mm Kodpfx Afsx Hpkrjfefa Panel return for edgebander: Right