Used Gleaner R 72 for sale (12,954)

Condition: new, Year of construction: 2022, You have a Behringer saw and your control panel is defective, the membrane keypad is broken, but the machine is still too good to replace. The BT 41 is a very common control panel and we can repair it for you! Please contact us. Hjdpfx Aotv Ip Iob Dew

Year of construction: 2016, condition: as good as new (ex-display), machine/vehicle number: KBK FFM, DEMAG KBK 2 - crane sky crane runway indoor crane Pictures shows an example crane runway with the below components. These are also available individually! Please ask your crane runway about your dimensions Payload / lifting capacity from 80 125 250 500 to 1000 Kg KBK 2-R turnouts left and right (with conductor rail) KBK 2-R swivel discs 890mm (with conductor rail) KBK 2-R rails curved 15 30 45 60 90 degrees (with conductor rail) KBK 2-R rails (with conductor rail) The system can be delivered completely according to your wishes Rails, rail connectors, trolleys, end plates, drag cables, holders/hangers, accessories are available Chain hoists on request Very good, almost new condition Hodpfx Abommbn Ts Dow Shipping by forwarding possible Demag KBK1 KBK2 and KBK3 rails are stock items!

Condition: excellent (used), Weiss Type: WK3-340/70 Weiss Air-Cooled Climatic Test Chamber Touch Panel Control Unit All control and operating commands can be triggered by simply touching the function symbols on the touch panel control unit. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Plug-ins The test chamber is equipped with plug-ins on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Penetration included in standard equipment R1: NW 125 mm L1: NW 85 mm Volume 335 liters Test chamber dimensions: Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Data for temperature tests: Minimum temperature -72°C Maximum temperature +180°C Temperature deviation, temporal ± 0.1 to ± 0.5 K Temperature homogeneity, spatial ± 0.5 to ± 1.5 K Temperature change rate, cooling 3 K/min Temperature change rate, heating 3 K/min Data for climatic tests: Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range: 10 to 98% RH Temperature deviation, over time: ± 0.1 to ± 0.3 K Temperature homogeneity, spatial: ± 0.5 to ± 1 K Humidity deviation, over time: ± 1 to ± 3% RH Operating data: Test room lighting: 2 x 24V, 50W halogen bulb Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Nominal current: 16 A Hodpov Sr Hzofx Ab Dsw Nominal power: 4.9 kW Fuse: 16 A slow-blow (on-site) Refrigerant: R-452A/R23 Weight: Approx. 585 kg For your safety, the following information is provided as a buyer! The following steps are performed on our chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: good (used), The following components from B&R Automation are for sale: - Power Panel 120 - CPU CP476 Hodert T Awjpfx Ab Dew Both were removed in 08/2022 and have worked without any problems to date.

Condition: excellent (used), Year of construction: 2017, saw blade diameter: 600 mm, cutting height (max.): 200 mm, cutting width (max.): 800 mm, input voltage: 400 V, Technical specifications: - Maximum saw blade diameter: 600 mm - Saw blade holder: 35 mm - Cutting time per stroke: 4 sec. - Motor power: 7.5 kW - Saw shaft speed: 2800 rpm - Air consumption per cycle: 20 L - Working table height: 900 mm - Extraction nozzle: 2x120 mm, 1x100 mm - Operating pressure: 7 - 8 bar - Net weight: approx. 520 kg - Required air flow: 1000 m³ / h - Voltage: 400 V / 50 Hz three-phase Cutting capacity in mm: 30 x 800 50 x 765 140 x 600 180 x 340 200 x 200 Standard basic equipment: - Pneumatic feed for saw blade - Two-hand safety PLC control - Automatic motor brake - Set of operating spanners - Emergency stop button Hjdpfx Asw Aqndjb Djw - Speed regulator for saw blade feed - Fixed vertical safety guard - Upper pneumatic safety pressure device (pneumatic safety cover) - Extraction speed at least 28 m / sec.

Condition: ready for operation (used), functionality: unexamined, A good used B&R Touchscreen control panel from a Cintex Checkweigher - came out of working machine Ready to ship worldwide We look after export documentation and shipping if required Hodpfx Ajwzvmieb Dow

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 1,740 kg, lifting height: 2,825 mm, tire size: 26 x 12.00 - 12, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, mast type: telescope, Year of construction: 2025, Equipment: additional headlights, all wheel drive, cabin, head guard, hydraulics, standard shovel, The H&R 1507T telescopic wheel loader is our smallest telescopic yard loader – perfect for tight work spaces. With a lifting capacity of 700 kg, the H&R 1507T telescopic loader lifts loads of up to 700 kg to a height of 2.82 m. Thanks to the standard wide tires, it is very stable and safe. The new 3-cylinder Perkins engine (Mannheim, Germany) meets the Euro 5 standard even without a particulate filter and is particularly efficient. With the 2-speed hydrostatic drive, the 1507T loader reaches speeds of approximately 16 km/h and is comfortable to drive. The additional hydraulic control circuit allows for the use of various attachments. The hydraulic quick coupler allows for quick and convenient changing of front-end tools. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machines have a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 1507T Telehandler • Technical and visual optimization in-house • Efficient engine made in Germany • Telescopic boom for greater reach • Ideal for tight work spaces • Includes standard 120cm bucket • Hydraulic quick coupler Hjdev T T N Tepfx Ab Djw • Joystick control with float position • Electric gear on the joystick • Auxiliary hydraulics for front-mounted tools • Hydraulic oil cooler • Brake inching pedal • Open cab and safety bar with removable canopy • Rotating beacon • LED work lights front and rear • Wide tires 26 x 12.00-12 • Adjustable steering column and seat • Hour meter and fuel gauge • Trailer hitch ball head • CE compliant (EU Machinery Directive) and approved by the German Road Traffic Licensing Regulations (STVZO) • 1-year spare parts warranty Price Net: €17,710.00 VAT: €3,364.90 € Gross: €21,074.90 Financing available! Optional 2-year warranty €590 net Pallet fork €650 net TÜV (road approval) €870 net Transport to Germany / Austria upon request Technical specifications Lifting capacity: 700 kg Lift height: 2825 mm (bottom edge of standard pallet fork) Unloading height: 2383 mm (standard bucket tipped out) Lift time / Lowering time: 4.0 / 3.5 seconds Engine: 3-cylinder Perkins Power: 25 HP Emissions class: Euro 5 Drive: Hydrostatic (PWG) All-wheel drive, speed approx. 16 km/h Dimensions: 3805 x 1160 x 2235 mm Weight: 1740 kg Tires: 26 x 12.00-12 Turning radius: 4.3 m Accessories and Spare parts are available from us. Please provide your phone number when you inquire!

Condition: new, R. & S. Keller Control panel Sinumerik 820 T , unused, 100% functional Hodpfx Absi Ecl Io Dew

Condition: new, functionality: fully functional, power: 18.8 kW (25.56 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 2,470 kg, lifting power: 1,200 kg/m, lifting height: 2,489 mm, tire size: 31x15,5x15 AS, tire condition: 100 %, axle configuration: 2 axles, emission class: euro5, digging bucket width: 1,600 mm, Year of construction: 2025, fuel: diesel, load capacity: 1,200 kg, Equipment: additional headlights, all wheel drive, cabin, head guard, pallet forks, standard shovel, trailer coupling, The H&R 2512 farm loader offers you more fun at work for less money. With a small turning circle, the H&R 2512 wheel loader is suitable even on small areas. Thanks to the comfort cab, the H&R 2512 wheel loader is comfortable and also suitable for inclement weather. Its 4-cylinder 25 hp engine is particularly economical and powerful. With the 2-speed torque converter transmission and all-wheel drive, the loader is easy to drive even in difficult ground conditions. The standard wide tires make it particularly stable and ensure high traction. The hydraulic quick coupler allows for quick changes of the included attachments (standard bucket and pallet fork as standard). An additional 3rd and 4th control circuit with float position is available. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 2512 Skid Steer Loader • Fully equipped • Extensively optimized in Germany • Includes pallet forks • Includes standard 160cm wide bucket • Hydraulic quick coupler • Auxiliary hydraulics for front attachments, 3+4 control circuits • Auxiliary cooler for hydraulic oil • Joystick with electric gearshift and float position • Large cabin with good all-round visibility • Heating + ventilation • 220-volt electric heater for engine preheating Hsdpfsrgn U Eex Ab Dew • Rotating beacon • LED auxiliary lighting • Radio with MP3 and USB • Adjustable comfortable seat with armrest • Adjustable steering column • Hour meter and fuel gauge • Trailer coupling for additional trailer use • Rearview camera with display • Wide tires 31x15.5-15 agricultural • 1-year spare parts warranty • CE compliant according to the EU Machinery Directive Price Net: €19,975.00 VAT: €3,795.25 Gross: €23,770.25 Financing available. Optional Full warranty available for up to 48 months Road registration/operating license €595 Transportation within Germany/Austria available for an additional charge. -> Please provide us with your zip code for a non-binding, customized transport quote. Technical Specifications Lifting capacity: 1200 kg Lifting height: 2489 mm (bottom edge of standard pallet fork) Unloading height: 2023 mm (standard wheel bucket tipped out) Engine: Yunnei 4-cylinder Engine power: 18.8 kW / 25 HP Emissions class: Euro 5 Drive: Torque converter Speed: approx. 20 km/h Dimensions (L x W x H): 3740 x 1600 x 2460 mm Weight: 2470 kg Tires: 31 x 15.5 - 15 AS Accessories and spare parts are available from us. Please provide your telephone number for inquiries.

Condition: new, R.& S. Keller control panel lid Dialog 11 , unused, 100% functional Hodpfxei Ecmao Ab Djw

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), gearing type: hydrostat, fuel type: diesel, color: red, overall weight: 1,980 kg, lifting power: 900 kg/m, lifting height: 2,530 mm, tire size: 31 X 15,5 -15, axle configuration: 2 axles, emission class: euro5, digging bucket width: 1,500 mm, Year of construction: 2025, fuel: diesel, load capacity: 950 kg, Equipment: UVV, additional headlights, all wheel drive, cabin, hydraulics, pallet forks, standard shovel, trailer coupling, The H&R 2210-S25 compact loader (narrow track) - ideal for tight work spaces. The new 3-cylinder Perkins Turbo engine is particularly efficient and meets the latest Euro 5 standard. Thanks to the 2-stage hydrostatic drive, it can reach speeds of approximately 16 km/h and is comfortable to drive. With a high lifting capacity, the farm loader can handle even heavy loads of up to 950 kg at a height of 2.53 m. The standard wide tires make it particularly stable. Thanks to the large steering angle of 42° and the small turning circle, it is also ideal for use in small areas. With the additional 3rd and 4th hydraulic control circuits, various attachments can be used. The hydraulic quick coupler allows for quick and convenient changing of front-mounted tools. The electric gear on the joystick makes operating the HR 2210 S25 loader particularly comfortable. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 2210-S25 Wheel Loader • Fully equipped • Extensively optimized in Germany • Narrow track for tight work environments • Manually adjustable pallet forks included • Standard 150 cm bucket included • Comfort cabin with heating, ventilation, and radio • Joystick with float position and electric gear • Rearview camera with display • Auxiliary hydraulics for front-mounted implements, 3rd and 4th control circuits • Hydraulic oil cooler • Brake-inch pedal • Rotating beacon • Trailer coupling for trailer use • LED work lights front and rear • Wide tires 31 x 15.5-15 • Adjustable steering column and seat • Hour meter and fuel gauge • CE compliant according to the EU Machinery Directive • 1-year spare parts warranty Price Net: €20,405.00 VAT: €3,876.95 € Gross: €24,281.95 Optional Road registration / operating permit: €595 Extended warranty (2 years): €590 Hodsrgqz Espfx Ab Djw Transportation in Germany and Austria: Upon request Technical specifications Engine: 3-cylinder Perkins Turbo Power: 25 HP Emissions class: Euro 5 Lifting capacity: 950 kg Lift height: 2.53 m (bottom edge of standard pallet fork) Lift time / Lowering time: 4.0 / 3.5 seconds Dimensions: 3380 x 1407 x 2340 mm Weight: 1980 kg Bucket width: 150 cm Tires: 31 x 15.5 - 15 Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 2,550 kg, empty load weight: 2,000 kg, lifting height: 2,530 mm, number of seats: 1, Year of construction: 2025, fuel: diesel, load capacity: 950 kg, Equipment: all wheel drive, head guard, hydraulics, pallet forks, standard shovel, H&R Loader 2010-S25: The compact wheel loader for versatile applications with an open cab and narrow track. With a powerful 25 HP 3-cylinder Perkins Turbo engine from Germany and robust all-wheel drive, this compact wheel loader offers outstanding lifting capacity and high maneuverability – perfect for heavy loads and tight work environments. Advantages of the H&R Wheel Loader 2010-S25 Powerful engine from Germany: The 3-cylinder Perkins Turbo engine with 25 HP delivers high performance with low fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its high weight and a lifting capacity of 950 kg, the H&R wheel loader has a relatively small turning circle. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between different attachments, such as the standard bucket or the manually adjustable pallet fork. Expandable functions: Use the 3rd and 4th hydraulic control circuits to operate additional attachments such as mowers, bale grabs, snow plows, and much more. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 2010-S25 • Lifts up to 950 kg at 2.53 m (bottom edge of standard pallet fork) • Extensively optimized in Germany • Narrow track for tight work environments • Supplied with standard bucket and pallet fork • Powerful and versatile - versatile • Compact design ensures high maneuverability • Joystick with electric gear shift for precise control • 3rd and 4th control circuits for attachments such as mowers, bale grabs, snow plows, etc. • LED work lights and windshield wipers for clear visibility in all weather conditions • MP3 radio and USB port for entertainment while working • Trailer hitch for additional trailer use • 220 V cooling water preheater for reliable cold start capability and increased engine life • Hour meter for monitoring operating times and ensuring optimal compliance with maintenance intervals • CE compliant according to the EU Machinery Directive • 1-year spare parts warranty Price Net: €19,150.00 VAT: €3,638.50 Gross: €22,788.50 Financing available! Optional Road registration / operating permit: €595 Extended warranty (2 years): €590 Hodpfxerdzyms Ab Dow Transportation in Germany and Austria: Upon request Technical details Engine: 3-cylinder Perkins Turbo Engine power: 25 hp (18.8 kW) Emissions class: Euro 5 Lift height: 2530 mm (bottom edge of standard pallet fork) Lift capacity: 950 kg Wheelbase: 1595 mm Tires: 31×15.5-15 Dimensions: 3380 x 1407 x 2340 mm Weight: 1980 kg Spare parts and accessories are available from us.

Condition: new, functionality: fully functional, power: 18.5 kW (25.15 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 45 l, color: red, overall weight: 1,500 kg, empty load weight: 1,500 kg, lifting height: 2,472 mm, tire size: 26X12.00-12, number of seats: 1, Year of construction: 2025, load capacity: 700 kg, Equipment: additional headlights, all wheel drive, hydraulics, standard shovel, trailer coupling, The H&R 1507 skid steer loader is our smallest yard loader – perfect for tight work spaces. With a lifting capacity of 700 kg, the H&R 1507 wheel loader lifts loads of up to 700 kg to a height of 2.47 m. Thanks to the standard wide tires, it is very stable and safe. The new 3-cylinder Perkins engine (Mannheim, Germany) meets the Euro 5 standard even without a particulate filter and is particularly efficient. With the 2-speed hydrostatic drive, the 1507 loader reaches a top speed of approximately 16 km/h and is comfortable to drive. The additional 3rd and 4th hydraulic control circuits allow for the use of various attachments. The hydraulic quick coupler allows for quick and convenient changing of front-end tools. Hjdpfx Aeuqu Sgsb Dsw H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machines have a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 1507 • Technical and visual optimization in-house • Efficient engine made in Germany • Ideal for tight work spaces • Includes standard 120cm bucket • Hydraulic quick coupler • Joystick control with float position • Electric gear on the joystick • Auxiliary hydraulics for front-mounted tools, 3rd and 4th control circuits • Hydraulic oil cooler • Brake inching pedal • Open cab and safety bar with removable canopy • Rotating beacon • LED work lights front and rear • Wide tires 26 x 12.00-12 • Adjustable steering column and seat • Hour meter and fuel gauge • Ball-head trailer coupling • CE compliant (EU Machinery Directive) • 1-year spare parts warranty Price Net: €15,880.00 VAT: €3,017.00 € Gross: €18,897.00 Financing available! Optional Road legal available Delivery available Technical specifications Lifting capacity: 700 kg Lift height: 2472 mm (bottom edge of standard pallet fork) Unloading height: 1915 mm (standard bucket tipped out) Lift time / Lowering time: 4.0 / 3.5 seconds Engine: 3-cylinder Perkins Power: 25 HP Emissions class: Euro 5 Drive: Hydrostatic (PWG) All-wheel drive, speed approx. 16 km/h Tires: 26 x 12.00-12 Dimensions: 2860 x 1160 x 2340 mm Weight: 1600 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!

Condition: new, functionality: fully functional, power: 18.5 kW (25.15 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 45 l, color: red, overall weight: 1,700 kg, empty load weight: 1,600 kg, lifting power: 800 kg/m, lifting height: 2,470 mm, tire size: 12, tire condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, shovel volume: 0.4 m³, digging bucket width: 1,200 mm, Year of construction: 2025, load capacity: 700 kg, Equipment: additional headlights, all wheel drive, cabin, head guard, hydraulics, pallet forks, standard shovel, trailer coupling, The H&R 1607 wheel loader is our smallest loader with a cab. It is exceptionally maneuverable and can be used wherever space is limited. With a lifting capacity of 700 kg, the H&R 1607 wheel loader lifts loads of up to 700 kg to a height of 2.47 m. Thanks to the standard wide tires, it is very stable and safe. The new 3-cylinder Perkins engine (Mannheim, Germany) meets the Euro 5 standard even without a particulate filter and is particularly efficient. With the 2-speed hydrostatic drive, the 1607 loader reaches a top speed of approximately 16 km/h and is comfortable to drive. The additional 3rd and 4th hydraulic control circuits allow for the use of various attachments. The hydraulic quick coupler allows for quick and convenient changing of front-mounted tools. H&R wheel loaders are technically and visually optimized in-house, clearly distinguishing them from the competition in terms of quality. Key Features of the H&R 1607 Skid Steer Loader • Fully equipped • Extensively optimized in Germany • Ideal for tight work spaces • Includes standard 120cm bucket • Comfortable cab with heating, ventilation, and radio (USB/MP3) • Hydraulic quick coupler • Joystick control with float position • Electric gear on the joystick • Rearview camera with display • Brake inching pedal • Auxiliary hydraulics for front-mounted implements, 3rd and 4th control circuit • Hydraulic oil cooler • Rotating beacon Hedsupz T Iepfx Ab Dow • LED work lights front and rear • Wide tires 26 x 12.00-12 • Adjustable steering column and seat • Hour meter and fuel gauge • Trailer hitch with ball head • CE compliant according to the EU Machinery Directive • 1-year spare parts warranty Price Net: €17,610.00 VAT: €3,345.90 Gross: €20,955.90 Optional Transport to Germany and Austria possible. Road registration possible. Financing available. Technical specifications Lifting capacity: 700 kg Lift height: 2.47 m (bottom edge of standard pallet fork) Lift time / lowering time: 4.0 / 3.5 seconds Engine: 3-cylinder Perkins Turbo Power: 25 HP Emissions class: Euro 5 Drive: Hydrostatic (PWG) All-wheel drive, speed approx. 16 km/h Dimensions: 2860 x 1160 x 2340 mm Weight: 1600 kg Tires: 26 x 12.00-12 Accessories and spare parts are available from us.

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), gearing type: hydrostat, fuel type: diesel, color: red, empty load weight: 2,150 kg, lifting power: 980 kg/m, lifting height: 2,500 mm, tire size: 31X15,5-15, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, digging bucket width: 1,500 mm, Year of construction: 2025, fuel: diesel, load capacity: 980 kg, Equipment: additional headlights, all wheel drive, cabin, differential lock, hydraulics, pallet forks, standard shovel, trailer coupling, The H&R 2210-B35 wheel loader (wide track) – a compact loader with a wide track for greater stability. Hjdjrhh Sqopfx Ab Dew The new 3-cylinder Perkins Turbo engine (Mannheim, Germany) meets the Euro 5 standard even without a particulate filter and is particularly efficient. With its 2-stage hydrostatic drive, the 2210 B35 compact loader is fast and easy to drive at speeds of approximately 16 km/h. Thanks to the large steering angle of 42° and the small turning circle, it is ideal for use on small areas. The farm loader comes standard with pallet forks and a standard bucket, so you can start working immediately. The 3- and 4-way hydraulic control circuit allows for the use of various attachments. The hydraulic quick coupler allows for quick and convenient front-end tool changes. With its high lifting capacity, the HR 2210 loader can lift even heavy loads of up to 980 kg to a height of 2.53 m. Thanks to the standard 31x15.5-15 wide tires, it is particularly stable. The electric gear on the joystick makes operating the HR 2210-B35 particularly comfortable. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 2210-B35 Wheel Loader • Fully equipped • Wide track for greater stability • Extensively optimized in Germany • Includes manually adjustable pallet forks • Includes standard 150 cm bucket • Comfort cab with heating, ventilation, and radio • Rearview camera with display • Joystick with float position and electric gear • Auxiliary hydraulics for front-mounted implements, 3rd and 4th control circuits • Hydraulic oil cooler • Brake inching pedal • Trailer hitch for trailer use • Rotating beacon • LED work lights front and rear • Wide tires 31 x 15.5-15 • Adjustable steering column and seat • Hour meter and fuel gauge • CE compliant according to the EU Machinery Directive • 1-year spare parts warranty Price Net: €22,945.00 VAT: €4,359.55 € Gross: €27,304.55 Financing available! Optional 2-year warranty €590 TÜV road approval / operating permit for work machine €595 Transport to Germany and Austria for an additional charge Technical specifications Engine: 3-cylinder Perkins Turbo (25 HP) Lifting capacity: 980 kg Lift height: 2530 mm (bottom edge of standard pallet fork) Unloading height: 1956 mm (standard bucket tipped) Lift time / lowering time: 4.0 / 3.5 seconds Dimensions: approx. 3380 x 1496 x 2340 mm Weight: 2160 kg Bucket width: 150 cm Tires: 31x15.5 -15 Spare parts and accessories are available from us. Please provide your telephone number when making inquiries!

Condition: new, functionality: fully functional, power: 36.77 kW (49.99 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 3,520 kg, lifting power: 1.4 kg/m, lifting height: 2,538 mm, tire size: 20,5-70 R16, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, digging bucket width: 1,500 mm, Year of construction: 2025, fuel: diesel, load capacity: 1,400 kg, Equipment: additional headlights, all wheel drive, cabin, hydraulics, pallet forks, parking heater, soot filter, standard shovel, trailer coupling, H&R Loader 3514 – The powerful wheel loader for versatile applications Advantages of the H&R 3514 Articulated Loader Powerful engine: The Yunnei DEF20CFF4 50 hp engine delivers maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its weight and a lifting capacity of 1400 kg, the H&R Wheel Loader 3514 remains relatively maneuverable – ideal for tight construction sites and agricultural applications. Hydraulic quick coupler: The hydraulic quick coupler allows you to quickly and easily switch between various attachments, such as the standard bucket or the manually adjustable pallet fork. Expandable functions: Use the 3rd and 4th hydraulic control circuits to operate additional attachments such as mowers, bale grippers, snow plows, and much more. Comfortable cab for all-day use: The H&R 3514 wheel loader offers a spacious, air-conditioned comfort cab with an adjustable seat and steering column, diesel auxiliary heating, and rearview camera. This allows you to complete even longer jobs comfortably and safely. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives a comprehensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 3514 Wheel Loader • Fully equipped • Includes standard 150 cm bucket and pallet fork • Powerful and versatile – versatile • Compact design ensures good maneuverability • Comfortable cab with heating, ventilation, and a diesel auxiliary heater • Joystick with electric gearshift for precise control • Additional 3rd and 4th control circuits for attachments • LED work lights and windshield wipers for clear visibility in all weather conditions • Rearview camera with display • MP3 radio and USB port for entertainment while working • Ball-head trailer hitch with socket for additional trailer use • 220V coolant preheater for reliable cold start capability • Hour meter for monitoring operating times and maintenance intervals • CE compliant according to the EU Machinery Directive • Extensively optimized in Germany • 1-year spare parts warranty Price Net: €22,530.00 VAT: €4,280.70 Gross: €26,810.70 Financing available! Optional Road registration / operating permit: €480 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Hjdpfx Ajrkmfxeb Dew Engine: 4-cylinder Yunnei Engine power: 50 hp Emissions class: Euro 5 Lifting height: 2538 mm (bottom edge of standard pallet fork) Unloading height: 1950 mm (standard bucket tipped out) Lifting capacity: 1400 kg Wheelbase: 2200 mm Tires: 20.5-70 R16 Dimensions: 3870 x 1750 x 2570 mm Weight: 3520 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!

Condition: new, functionality: fully functional, power: 44.87 kW (61.01 HP), gearing type: automatic, fuel type: diesel, fuel tank capacity: 55 l, color: red, overall weight: 4,220 kg, lifting power: 1,800 kg/m, lifting height: 2,784 mm, tire condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, digging bucket width: 1,900 mm, Year of construction: 2025, load capacity: 1,800 kg, machine/vehicle number: H&R 3518, Equipment: additional headlights, all wheel drive, cabin, hydraulics, pallet forks, soot filter, standard shovel, trailer coupling, H&R Loader 3518 – The versatile farm loader for demanding tasks Advantages of the H&R 3518 Wheel Loader Powerful engine: The Yunnei DEF20CFF4 engine with 61 hp ensures maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its size, weight, and high lifting capacity, the H&R wheel loader is relatively maneuverable. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between different attachments. Expandable functions: Use the 3rd and 4th hydraulic control circuits to operate additional attachments such as mowers, bale grabs, snow plows, and much more. Comfortable cab for all-day use: The H&R wheel loader offers a spacious cab with an adjustable seat, diesel auxiliary heating, a rearview camera, heating, ventilation, and a radio with MP3 and USB. This allows you to complete even longer jobs comfortably and safely. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives a comprehensive rust protection treatment. Our wheel loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 3518 Farm Loader • Fully equipped • Extensively optimized in Germany • Powerful and versatile – versatile use • Compact design ensures high maneuverability despite its size • Comfortable cab with heating and ventilation as well as a diesel auxiliary heater • Joystick with electric gearshift for precise control • Additional 3rd and 4th control circuits for attachments • Rearview camera with display • LED work lights and windshield wipers for clear visibility in all weather conditions • MP3 radio and USB port for entertainment while working • Ball-head trailer hitch with socket for trailer use • 220V coolant preheating for reliable cold start capability and increased engine life. • Hour meter for monitoring operating times and maintenance intervals • Extensive rust protection treatment • CE compliant according to the EU Machinery Directive • Includes a 1-year spare parts warranty Price Net: €24,590.00 VAT: €4,672.10 Gross: €29,262.10 Financing available! Optional Road registration / operating permit: €480 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei Hjdpjul Ab Sjfx Ab Dow Engine power: 61 hp Emissions class: Euro 5 Lifting height: 2784 mm (bottom edge of standard pallet fork) Unloading height: 2279 mm (standard bucket tipped out) Lifting capacity: 1800 kg Wheelbase: 2280 mm Tires: 20.5-70 R17.5 Dimensions: 4050 x 1870 x 2570 mm Weight: 3850 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries.

Condition: new, functionality: fully functional, power: 55.16 kW (75.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 4,920 kg, lifting height: 3,358 mm, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, digging bucket width: 2,000 mm, Year of construction: 2025, load capacity: 2,500 kg, Equipment: UVV, additional headlights, all wheel drive, cabin, head guard, hydraulics, pallet forks, parking heater, soot filter, standard shovel, trailer coupling, H&R Loader 5025 – Our heavyweight lifts loads up to 2.5 tons. The H&R Wheel Loader 5025 is your reliable all-rounder for demanding tasks in agriculture, construction, and industry. Advantages of the H&R 5025 Farm Loader Powerful engine: The Yunnei DEF20CAF4 engine with 75 hp ensures maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its size and weight, the H&R Wheel Loader 5025 is relatively maneuverable. Hydraulic quick coupler: The hydraulic quick coupler allows you to quickly and easily switch between different attachments. Hjdpfx Aeu Dyl Teb Dew Expandable functions: Use the additional 3rd and 4th hydraulic control circuits to operate front-end tools such as mowers, bale grippers, snow plows, and much more. Comfortable cab for all-day use: The H&R wheel loader offers a spacious cab with an adjustable seat, diesel auxiliary heater, rearview camera, ventilation, and radio. This allows you to complete even longer jobs comfortably and safely. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives a comprehensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 5025 Wheel Loader • Fully equipped • Extensively optimized in Germany • Lifts heavy loads up to 2.5 tons at 3.35 meters • Includes standard bucket (200 cm) and pallet fork • Powerful and versatile – versatile • Well-thought-out design ensures high maneuverability despite its size • Comfortable cab with heating and ventilation, plus radio (MP3 and USB) • Joystick with electric gearshift for precise control • 3rd and 4th hydraulic control circuits for attachments • LED work lights and windshield wipers for clear visibility in all weather conditions • Rearview camera with display • Diesel auxiliary heater • Ball-head trailer hitch with socket for additional trailer use • 220V coolant preheater for reliable cold start capability and increased engine life • Hour meter for monitoring operating times and maintenance intervals • CE compliant according to the EU Machinery Directive • Includes 1 year warranty Spare parts warranty Price Net: €28,583.00 VAT: €5,430.77 Gross: €34,013.77 Financing available! Optional Road registration / operating permit: €480 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei Engine power: 75 hp (55.8 kW) Emissions class: Euro 5 Lifting height: 3358 mm (bottom edge of standard pallet fork) Unloading height: 2692 mm (standard bucket tipped out) Lifting capacity: 2500 kg Wheelbase: 2550 mm Tires: 16-70 R20 Dimensions: 5370 x 2080 x 2650 mm Weight: 4920 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!

Condition: new, functionality: fully functional, power: 18.5 kW (25.15 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 50 l, color: red, overall weight: 2,600 kg, empty load weight: 2,500 kg, lifting power: 1,000 kg/m, lifting height: 3,310 mm, tire condition: 100 %, axle configuration: 2 axles, number of seats: 1, shovel volume: 0.4 m³, digging bucket width: 160 mm, Year of construction: 2025, load capacity: 980 kg, Equipment: additional headlights, adjustable boom, all wheel drive, cabin, differential lock, head guard, hydraulics, pallet forks, standard shovel, trailer coupling, The H&R 2210-T telehandler with the new 3-cylinder Perkins Turbo engine (Mannheim, Germany) meets the Euro 5 standard even without a particulate filter. The new turbo engine is particularly economical, and with the 2-stage hydrostatic drive, it can reach speeds of approximately 16 km/h. Thanks to the large steering angle of 42° and a small turning circle, it is ideal for use on even the smallest areas. The 2210T wheel loader with telehandler comes standard with a quick-change pallet fork and a standard bucket, so you can start working immediately. With the additional hydraulic control circuit, various attachments can be used for the yard loader. The telescopic boom gives the 2210-T an excellent reach. The electric gear on the joystick makes operating the H&R 2210T particularly convenient. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Advantages of the H&R 2210T Telehandler • Fully equipped • Efficient engine from Germany (Euro 5) • Extensively optimized in-house • Extendable telescopic boom • Heated comfort cab • Includes pallet forks • Includes standard 150 cm bucket • Joystick with float position and electric gear • Auxiliary hydraulics for front-mounted tools • Hydraulic oil cooler • Brake-inch pedal • Rearview camera with display • Rotating beacon • LED work lights front and rear • Wide tires 31 x 15.5-15 • Radio with MP3 and USB • Adjustable steering column and seat • Hour meter and fuel gauge Hedpfxjul Af Do Ab Djw • Trailer coupling • 1-year spare parts warranty • CE compliant according to the EU Machinery Directive Price Net: €24,975.00 VAT: €4,745.25 Gross: €29,720.25 Financing available! Optional 2-year warranty €590 TÜV road approval / operating permit for work machine €595 Transport to Germany and Austria upon request Technical specifications Engine: 3-cylinder Perkins Turbo Power: 25 HP Emissions class: Euro 5 Lifting capacity: 980 kg Lifting height: 3310 mm (bottom edge of standard pallet fork) Unloading height: 2796 mm (bottom edge of standard bucket tipped out) Lift time / lowering time: 4.0 / 3.5 seconds Wheelbase: 1.6 m Dimensions (L x W x H): 3710 x 1496 x 2340 mm Weight: 2430 kg Tires: 31 x 15.5 - 15 Accessories and spare parts are available from us. Please provide us with your telephone number when making inquiries!

Condition: new, functionality: fully functional, power: 18.8 kW (25.56 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 2,740 kg, lifting height: 3,283 mm, tire size: 31x15,5x15 AS, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, Year of construction: 2025, fuel: diesel, Equipment: additional headlights, adjustable boom, all wheel drive, cabin, head guard, pallet forks, standard shovel, H&R Telehandler 2512T – The compact wheel loader for versatile applications with an enclosed cab for greater comfort. Advantages of the H&R Wheel Loader 2512T Powerful engine: The Yunnei DEF20CFF4 4-cylinder engine with 25 hp delivers high performance with low fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its weight and a lifting capacity of 1200 kg, the H&R wheel loader has a relatively small turning circle. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between different attachments, such as the standard bucket or the manually adjustable pallet fork. Expandable functions: Use the additional hydraulic control circuit to operate additional attachments such as mowers, bale grippers, snow plows, and much more. H&R loaders are technically and visually optimized in-house and thoroughly tested. Additionally, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 2512T Telehandler • Fully equipped • Extensively optimized in Germany • Telescopic boom for a greater reach • Includes standard shovel (160 cm) and pallet fork • Powerful and versatile - versatile • Compact design ensures high maneuverability • Comfortable cab with heating, ventilation, and radio (MP3 and USB) for extended working hours • Joystick with electric gearshift for precise control • Additional control circuit for attachments such as mowers, bale grabs, snow plows, etc. • LED work lights and windshield wipers for clear visibility in all weather conditions • MP3 radio and USB port for entertainment while working • Rearview camera with display in the interior • Trailer hitch for additional trailer use • 220V cooling water preheater for reliable cold start capability and increased engine life • Hour meter for monitoring operating times and ensuring optimal compliance with maintenance intervals • Ideal for agriculture and construction and industry • CE-compliant according to the EU Machinery Directive • 1-year spare parts warranty Price Net: €21,845.00 VAT: €4,150.00 Gross: €25,995.00 Financing available! Optional Road registration / operating permit: €595 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei DEF20CFF4 Engine power: 25 hp (18.8 kW) Emissions class: Euro 5 Lifting capacity: 1200 kg Lifting height: 3283 mm (bottom edge of standard pallet fork) Unloading height: 2753 mm (standard bucket tipped) Lifting capacity: 1200 kg Wheelbase: 2.17 m Hedpfx Aerhgn Seb Djw Tires: 31×15.5-15 AS Dimensions: 3850 x 1610 x 2460 mm Weight: 2740 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries.

Condition: new, functionality: fully functional, power: 55.9 kW (76.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 4,960 kg, lifting power: 2,500 kg/m, lifting height: 4,452 mm, tire size: 16-70 R20, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, mast type: telescope, digging bucket width: 2,000 mm, Year of construction: 2025, fuel: diesel, load capacity: 2,500 kg, Equipment: additional headlights, adjustable boom, all wheel drive, cabin, hydraulics, pallet forks, parking heater, soot filter, standard shovel, trailer coupling, H&R Telehandler 5025T – Your reliable wheel loader for demanding tasks in agriculture, construction, and industry. Advantages of the H&R 5025T Telehandler Powerful engine: The Yunnei DEF20CAF4 engine with 75 hp ensures maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its size and weight, the HR Wheel Loader 5025T is relatively maneuverable. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between different attachments. Expandable functions: Use the additional hydraulic control circuit to operate front-end tools such as mowers, bale grabs, snow plows, and much more. Comfortable cab for all-day use: The H&R wheel loader offers a spacious cab with an adjustable seat, diesel auxiliary heating, rearview camera, ventilation, and radio. This allows you to complete even longer jobs comfortably and safely. H&R loaders are technically and visually optimized in-house and thoroughly tested. Additionally, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 5025T Telehandler • Fully equipped • Extensively optimized in Germany • Telescopic boom increases the working reach • Lifts heavy loads up to 2.5 tons to a height of 4.45 meters (bottom edge of standard pallet forks) • Includes standard bucket (200 cm) and pallet forks • Powerful and powerful - versatile • Well-thought-out design ensures high maneuverability despite its size • Comfortable cab with heating and ventilation, plus radio (MP3 and USB) • Rearview camera with display Hjdpfx Abjrgq Ets Dsw • Diesel auxiliary heater • Joystick with electric gearshift for precise control • Additional hydraulic control circuit for attachments • LED work lights and windshield wipers for clear visibility in all weather conditions • Ball-head trailer hitch with socket for additional trailer use • 220V coolant preheater for reliable cold start capability and increased engine life • Hour meter for monitoring operating times and maintenance intervals • CE compliant according to the EU Machinery Directive • Includes a 1-year spare parts warranty Price Net: €32,690.00 VAT: €6,211.10 Gross: €38,901.10 Financing available! Optional Road approval available. Delivery available. Technical Details Engine: 4-cylinder Yunnei Engine power: 75 hp (55.8 kW) Emissions class: Euro 5 Lifting height: 4452 mm (bottom edge of standard pallet fork) Unloading height: 3780 mm (bottom edge of standard bucket, tipped out) Lifting capacity: 2500 kg Wheelbase: 2550 mm Tires: 16-70 R20 Dimensions: 5270 x 2080 x 2650 mm Weight: 4960 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!

Condition: new, functionality: fully functional, power: 36.77 kW (49.99 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 4,050 kg, lifting height: 4,200 mm, tire size: 20,5-70 R16, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, emission class: euro5, mast type: telescope, digging bucket width: 1,500 mm, Year of construction: 2025, fuel: diesel, load capacity: 1,400 kg, Equipment: additional headlights, adjustable boom, all wheel drive, cabin, head guard, hydraulics, low noise, parking heater, soot filter, standard shovel, trailer coupling, H&R Telehandler 3514T – The powerful telehandler for versatile applications Advantages of the H&R Wheel Loader 3514T Extended working range: Thanks to the telescopic boom, the loader can lift loads of up to 1.4 tons to a height of up to 4.4 meters. Powerful engine: The Yunnei DEF20CFF4 50 hp engine ensures maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its weight and a lifting capacity of 1400 kg, the H&R Wheel Loader 3514 remains relatively maneuverable – ideal for tight construction sites and agricultural applications. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between different attachments, such as the standard bucket or the manually adjustable pallet fork. Expandable functions: Use the 4th hydraulic control circuit to operate additional attachments such as mowers, bale grabs, snow plows, and much more. Comfortable cab for all-day use: The H&R Loader 3514T offers a spacious, air-conditioned comfort cab with an adjustable seat, diesel auxiliary heating, and rearview camera. This allows you to carry out even longer jobs comfortably and safely. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives a comprehensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 3514T • Fully equipped • Extended reach thanks to telescopic boom • Extensively optimized in Germany • Powerful and versatile - versatile • Compact design ensures good maneuverability • Comfortable cab with heating and ventilation as well as a diesel auxiliary heater • Rearview camera with display • Adjustable steering column and seat • Joystick with electric gearshift for precise control • Additional control circuit for attachments • LED work lights and windshield wipers for clear visibility in all weather conditions • MP3 radio and USB port for entertainment while working • Ball-head trailer hitch with socket for additional trailer use • 220V coolant preheater for reliable cold start capability • Hour meter for monitoring operating times and maintenance intervals • CE compliant according to the EU Machinery Directive • 1-year spare parts warranty Price Net: €26,160.00 VAT: €4,970.40 Gross: €31,130.40 Optional Road registration / operating permit: €480 Extended warranty (2 years): €590 Hjdpsrdhx Tefx Ab Dsw Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei Engine power: 50 hp (36.8 kW) Emissions class: Euro 5 Lifting capacity: 1400 kg Lift height: 4401 mm (bottom edge of standard pallet fork) Unloading height: 3373 mm (bottom edge of standard bucket, tipped out) Wheelbase: 255 mm Tires: 20.5-70 R16 Dimensions: 5210 x 1690 x 2560 mm Weight: 4050 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!

Condition: new, functionality: fully functional, power: 45 kW (61.18 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 4,000 kg, lifting height: 4,095 mm, tire condition: 100 %, axle configuration: 2 axles, number of seats: 1, digging bucket width: 1,900 mm, Year of construction: 2025, load capacity: 1,800 kg, Equipment: additional headlights, adjustable boom, all wheel drive, cabin, hydraulics, pallet forks, parking heater, soot filter, standard shovel, trailer coupling, H&R Telehandler 3518T – the versatile farm loader with a telescopic boom for demanding tasks Benefits of the H&R 3518T Wheel Loader with a telescopic boom Powerful engine: The Yunnei DEF20CFF4 50 hp engine delivers maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Hodpfx Aoulac Teb Dsw Compact design, high maneuverability: Despite its size and weight, the H&R wheel loader is relatively maneuverable. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between various attachments, such as the standard bucket or the manually adjustable pallet fork. Expandable functions: Use the 4th hydraulic control circuit to operate additional attachments such as mowers, bale grabs, snow plows, and much more. Comfortable cab for all-day use: The H&R wheel loader offers a spacious cab with an adjustable seat, diesel auxiliary heating, and a rearview camera, as well as heating and ventilation. This allows you to complete even longer jobs comfortably and safely. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection. Our wheel loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 3518T Telehandler • Fully equipped • Extendable telescopic arm for greater reach • Includes standard shovel (190 cm) and pallet fork • Powerful and versatile • Compact design ensures high maneuverability despite its size • Comfortable cab with heating and ventilation • Joystick with electric gearshift for precise control • Additional control circuit for attachments • LED work lights and windshield wipers for clear visibility in all weather conditions • Rearview camera with display • MP3 radio and USB port for entertainment while working • Ball-head trailer hitch with socket for additional trailer use • 220V cooling water preheating for reliable cold start capability and increased engine life. • Hour meter for monitoring operating times and maintenance intervals • CE compliant according to the EU Machinery Directive • Extensively optimized in Germany • 1-year spare parts warranty Price Net: €28,660.00 VAT: €5,445.40 Gross: €34,105.40 Financing available! Optional Road registration / operating permit: €480 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei Engine power: 61 hp Emissions class: Euro 5 Lifting capacity: 1800 kg Lift height: 4095 mm (bottom edge of standard pallet fork) Unloading height: 3451 mm (standard bucket tipped out) Wheelbase: 2272 mm Tires: 20.5-70 R16 Dimensions: 4890 x 1870 x 2570 mm Weight: 4220 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!

Condition: new, functionality: fully functional, Year of construction: 2025, power: 18.39 kW (25.00 HP), motor manufacturer: Perkins, gearing type: automatic, fuel type: diesel, maximum speed: 16 km/h, Equipment: additional headlights, all wheel drive, hydraulics, lighting, trailer coupling, The H&R 1507T telescopic wheel loader is our smallest telescopic yard loader – perfect for tight work spaces. With a lifting capacity of 700 kg, the H&R 1507T telescopic loader lifts loads to a height of 3.02 m. Hodpfsv S U N Ejx Ab Dow Thanks to the standard wide tires, it is very stable and safe. The new 3-cylinder Perkins Turbo engine (Mannheim, Germany) meets the Euro 5 standard even without a particulate filter and is particularly efficient. With the 2-speed hydrostatic drive, the 1507T loader reaches speeds of approximately 16 km/h and is comfortable to drive. The additional hydraulic control circuit allows for the use of various attachments. The hydraulic quick coupler allows for quick and convenient changing of front-end tools. H&R loaders undergo extensive technical and visual optimization in-house, setting them apart from the competition in terms of quality. Key Features of the H&R 1507T Telehandler • Technical and visual optimization in-house • Telescopic arm for greater reach • Ideal for tight work spaces • Includes standard 120cm bucket • Hydraulic quick coupler • Joystick control with float position • Electric gear on the joystick • Auxiliary hydraulics for front-mounted tools • Hydraulic oil cooler • Open cab and safety bar with removable canopy • Rotating beacon • LED work lights front and rear • Wide tires 26 x 12.00-12 • Adjustable steering column • Hour meter and fuel gauge • Trailer hitch with ball head • 1-year spare parts warranty • CE compliant (EU Machinery Directive) and approved by the German Road Traffic Licensing Regulations Price Net: €17,710.00 VAT: €3,364.90 Gross: €21,074.90 € Optional 2-year warranty €590 net Pallet fork €650 net TÜV (road approval) €870 net Transport to Germany / Austria upon request Financing available Technical specifications Lifting capacity: 700 kg Lift height: 3025 mm Unloading height: 2825 mm Lift time / Lowering time: 4.0 / 3.5 seconds Engine: 3-cylinder Perkins Turbo Power: 25 HP Emissions class: Euro 5 Drive: Hydrostatic (PWG) All-wheel drive, speed approx. 16 km/h Dimensions: 3805 x 1160 x 2235 mm Weight: 1740 kg Turning radius: 4.3 m If a spare part is needed, it will be delivered quickly by express delivery directly from the factory to the customer. If you are interested, please contact us directly via email or telephone, as we are currently experiencing increasing problems with inquiries via the portal.

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 1,870 kg, lifting power: 700 kg/m, lifting height: 2,825 mm, tire size: 26 x 12.00 - 12, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, mast type: telescope, digging bucket width: 120 mm, Year of construction: 2025, Equipment: additional headlights, head guard, standard shovel, trailer coupling, The H&R 1607T telehandler is our smallest loader with a cab. It is exceptionally maneuverable and can be used wherever space is limited. With a lifting capacity of 700 kg, the H&R 1607T telehandler lifts loads weighing up to 700 kg to a height of 2.82 m (bottom edge of the standard pallet fork). Thanks to the standard wide tires, it is very stable and safe. The new 3-cylinder Perkins Turbo engine (Mannheim, Germany) meets the Euro 5 standard even without a particulate filter and is particularly efficient. With the 2-speed hydrostatic drive, the 1607 loader reaches a top speed of approximately 16 km/h and is comfortable to drive. The additional 3rd and 4th hydraulic control circuits allow for the use of various attachments. The hydraulic quick coupler allows for quick and convenient changing of front-mounted tools. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 1607T Skid Steer Loader • Fully equipped • Extensively optimized in Germany • Telescopic boom for extended reach • Ideal for tight work environments • Includes standard 120cm bucket and pallet forks • Comfortable cab with heating, ventilation, and radio (USB/MP3) • Hydraulic quick coupler • Joystick control with float position • Electric gear on the joystick • Auxiliary hydraulics for front-mounted tools • Hydraulic oil cooler • Rotating beacon • LED work lights front and rear • Wide tires 26 x 12.00-12 • Adjustable steering column • Hour meter and fuel gauge • Trailer hitch ball head • CE compliant according to the EU Machinery Directive • 1-year spare parts warranty Price Net: €19,290.00 VAT: €3,665.10 Gross: €22,955.10 Financing available! Hjdpov Tabijfx Ab Dew Optional 2-year warranty €595 TÜV (road approval) €870 Transport within Germany and Austria for an additional charge Please provide us with your address; we will be happy to provide you with a free, non-binding quote. Technical specifications Lifting capacity: 700 kg Lifting height: 2825 mm (bottom edge of standard pallet fork) Unloading height: 2383 mm (bottom edge of standard bucket tipped out) Lift time / Lowering time: 4.0 / 3.5 seconds Engine: Perkins 3-cylinder diesel Power: 25 HP Emissions class: Euro 5 Drive: Hydrostatic (PWG) All-wheel drive, speed approx. 16 km/h Dimensions: 2964 x 1160 x 2340 mm Weight: 1740 kg Standard tires: 26 x 12.00-12 Accessories and spare parts are not included. Available from us. Please provide your phone number when making inquiries!