Used Gleaner R 72 for sale (12,948)

Condition: used, B&R Acopos 1045 servo drive 8V1 removed from Engel robot ERC-6510-E - removed from running machine - fully functionalmanufacturer: B&R type: 8V1045 manufacturer no.: 8V1 spare part no.: Before purchasing, please check whether the Acopos you require also has a 12-pin green plug.  If the spare part is traded in as an exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Hedpfjiyzw Eox Ab Djw Dition: gebraucht

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 48 V, total height: 782 mm, total length: 1,220 mm, total width: 352 mm, Tested forklift battery for your truck - 48V 4PZS 620Ah - DIN C + 1 year warranty + Includes Aquamatik (automatic filling system) + Includes end cell connector & REMA 320 plug (other plug types can be fitted upon request) + Capacity: min. 90-100% (C5 capacity test protocol included on delivery) + Year of manufacture: 2024 Dimensions: Length 1,220 mm Width 352 mm Height 782 mm Weight: approx. 960 kg Suitable for the following models and many others: Linde A (1250) - 5022-00 Linde A - 5224-00 Linde R 10 B - 1120-00 Linde R 10 B - 1120-00 - front battery change Linde R 12 B - 1120-00 Linde R 12 B - 1120-00 - front battery change Linde R 12 C - 1120-00 Linde R 14 - 1120-00 Linde R 14 - 1120-00 - front battery change Linde R 14 B - 1120-00 - front battery change Linde R 14 G - 1120-00 - front battery change Linde R 14 HD - 1120-00 Linde R 14 HD - 1120-00 - front battery change Linde R 14 W - 1120-00 Linde R 14 W - 1120-00 - front battery change Linde R 16 - 1120-00 - front battery change Linde R 16 AS - 1120-00 - front battery change Linde R 16 AS 1270 - 1120-00 Linde R 16 B - 1120-00 - front battery change Linde R 16 C - 1120-00 Linde R 16 G - 1120-00 - front battery change Linde R 16 HD - 1120-00 Linde R 16 HD - 1120-00 - front battery change Linde R 16 S - 115-00 Linde R 16 S ACTIVE - 115-12 Linde R 16 W - 1120-00 Linde R 16 W - 1120-00 - front battery change Linde R 20 - 1120-00 Linde R 20 - 1120-00 - front battery change Linde R 20 - 115-00 Linde R 20 G - 1120-00 - front battery change Linde R 20 G - 115-12 Linde R 20 S - 115-12 Linde R 20 W - 1120-00 - front battery change Still FM 14 Still FM 17 Still FM-X 12 Still FM-X 14 Still FM-X 17 Still FM-X 20 Jungheinrich ETV Jungheinrich ETV 112 Jungheinrich ETV 214 Jungheinrich ETV 216 Jungheinrich ETV 320 Jungheinrich ETV 325 Jungheinrich ETV C 16 Toyota/BT RRE 200 Crown ESR Crown ESR 3020-1.4 Crown ESR 3020-1.6 Crown ESR 3020-2.0 Crown ESR 4000-1.4 Crown ESR 4000-1.6 Crown ESR 4000-2.0 Crown ESR 4500 Crown ESR 4500-1.4 Crown ESR 4500-1.6 Crown ESR 4500-2.0 Crown ESR 5000 Crown ESR 5000 S Crown ESR 5000-2.0 Crown ESR 5240 Crown ESR 5240-1.4 Crown ESR 5260-1.4 Crown ESR 5260-1.6 Crown ESR 5260-2.0 Crown ESR 5280S-1.6 Crown ESR 5280S-2.0 Atlet REACH TRUCK Atlet UMS 160 Atlet UMS 200 Atlet UNS 140 Caterpillar NR14/16 Caterpillar NR14N Caterpillar NR14N2S Caterpillar NR16N Caterpillar NR16N2HS Caterpillar NR20NH Hyster R1.6 Mitsubishi RB14N Mitsubishi RB14N2S Mitsubishi RB16N Mitsubishi RB20N2H Mitsubishi RB20NH Nichiyu FBR14-75B OM-Pimespo-Fiat XR 14 AC Hedpjwzu Aijfx Ab Dow Rocla REACH MAST TRUCK Yale MR 14 Yale MR 16 Common battery sizes available on request. Transport possible.

Condition: good (used), Technical specifications for shelf panel: Racking system: SSI Schäfer Type: R 3000 Hsdpfewvq Epox Ab Dew Scope of delivery includes: shelf panels, used Material color: Sendzimir galvanized total width: approx. 1,295 mm total depth: approx. 790 mm for upright depth: approx. 800 mm height: approx. 40 mm number of reinforcement beams: 2 pcs Weight / pcs.: approx. 12.82 kg Currently available in stock: 1,338 pcs. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any transportation or shipping of this item involves additional costs, which can be requested from us depending on the delivery location and/or scope of delivery.

Condition: excellent (used), Year of construction: 2008, input voltage: 400 V, Gas dryer for textiles after screen printing, M&R Sprint 2000. The dryer is in very good condition. Conveyor length: 7 m. Continuous adjustment of temperature and belt speed. Hodpjxfkyiofx Ab Dew

Condition: used, Year of construction: 2017, Used Heating Tunnel Omar R&G HTD12 year 2017 up to 12000 bph Technical Specifications and Use of the heating tunnel HTD12 The Used Heating Tunnel Omar R&G HTD12 year 2017 up to 12000 bph heats bottles using a hot water system, which makes it ideal for applications in the bottling industry. Moreover, this heating tunnel performs reliably and includes advanced technical features. It handles cylindrical bottles of various sizes while ensuring high efficiency and operational precision. Technical Specifications of the Used Heating Tunnel The used heating tunnel employs a hot water heat exchanger, and users need to supply hot water through a gas boiler. Consequently, this setup heats the bottles uniformly and optimizes the workflow. Additionally, the recycling pump and dryer consume 53 kW of energy, which ensures energy efficiency while maintaining high performance. Furthermore, the used heating tunnel processes 12000 bottles per hour (bph), which makes it particularly suitable for high-speed bottling lines. Its FIFO (First In First Out) single-file system organizes bottles into a continuous and orderly flow. As a result, the system ensures consistent thermal treatment. In terms of compatibility, the machine handles cylindrical bottles with diameters ranging from 60 mm to 100 mm. Therefore, it provides versatility for different formats and types of containers. Additionally, the tunnel operates counterclockwise (right-to-left), which suits specific production layout requirements. Hjdjvxz Axepfx Ab Dew Usage Conditions and Manufacturing Details The heating tunnel HTD12 operates in an “as-is” condition, so buyers must inspect the machine thoroughly before purchase. Notably, the manufacturer built this model in 2017, delivering a reliable and high-quality solution for integrating a heating tunnel into production lines. Omar R&G, a company renowned for producing high-quality machinery for the bottling industry, designed the HTD12 model to withstand intensive use. Consequently, it maintains operational reliability even in demanding environments. Technical and Functional Advantages The hot water heat exchanger delivers precise temperature control, which ensures uniform bottle heating. Moreover, the FIFO system keeps bottles in their entry order, which minimizes delays or errors during processing. In addition, the modular design and optimized layout simplify maintenance. Users can, therefore, integrate the tunnel quickly into existing lines. Furthermore, the system accommodates bottles of different diameters, providing versatility for diverse industrial applications. Conclusion of the Heating Tunnel HTD12 The Used Heating Tunnel Omar R&G HTD12 year 2017 up to 12000 bph provides a high-performing, reliable, and versatile solution for bottle heating. Moreover, the machine processes 12,000 bph, organizes bottles efficiently using the FIFO system, and supports various formats. Consequently, it proves to be an excellent choice for high-productivity bottling lines. Thus, this HTD12 model by Omar R&G combines high performance with operational simplicity. As a result, it becomes a solid choice for industry professionals who seek reliability and efficiency. Therefore, for companies that prioritize productivity and precision, this machine represents a long-term investment.

Condition: used, Year of construction: 1993, operating hours: 24,535 h, functionality: fully functional, Haulik und Roos Press RVD 80-800HS Pressing force: 80 t Adjustable ram stroke: 4 - 60 mm Ram adjustment: 0 - 80 mm Table clamping area approx.: 780 x 640 mm Ram clamping area approx.: 800 x 460 mm Strokes per minute: 30 - 800 min⁻¹ Feeder MD 260 SL 2794 Hsdewz Urkopfx Ab Djw Feed length 0-260 mm Maximum material thickness 3 mm Material width 10-260 mm Strip speed 60 m/min Used condition Sale on behalf of customer

Condition: used, B&R servo motor 8LSA57.E1045D NN = 4500 rpm - UN = 400V - removed from Battenfeld VM75/60V/60V R1040 - removed from running machine - fully functional Hodpsimw S Aofx Ab Dsw manufacturer: B&R type: 8LSA57.E1045D000-0 Dition: gebraucht

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 48 V, total height: 784 mm, total length: 1,035 mm, total width: 443 mm, Tested forklift battery for your forklift – 48V 4PZS 620Ah – DIN B + 1 year warranty + Includes Aquamatic system + Includes end discharge cables & REMA 320 connector (other connectors can be fitted on request) + Capacity: min. 90–100% (C5 capacity protocol will be provided upon delivery) + Year of delivery: 2024 Dimensions: Length: 1,035 mm Width: 443 mm Height: 784 mm Weight: approx. 960 kg Suitable for the following models and others: Linde A (1120) - 52-00 Linde K - 5231-00 Linde K - 5231-00 - side extraction Linde K 10 Linde K 10 - vertical extraction Linde K 12 Linde R 10 N - 1120-00 Linde R 10 N - 1120-00 - front extraction Linde R 12 N - 1120-00 Linde R 12 N - 1120-00 - front extraction Linde R 12 N - 136-00 Hjdswzvquopfx Ab Dow Linde R 14 - 1120-00 Linde R 14 - 376-00 Linde R 14 N - 1120-00 - front extraction Linde R 14 N - 1120-00 - vertical extraction Linde R 14 S N ACTIVE - 115-12 Linde R 14 SN - 115-08 Linde R 14 SN - 115-08 - vertical extraction Linde R 16 AS 1140 - 1120-00 Linde R 16 N - 1120-00 Linde R 16 N - 1120-00 - front extraction Linde R 16 N - 113-00 Linde R 16 N - 115-00 Linde R 16 N - 115- - vertical extraction Linde R 16 N HD - 1120-00 - front extraction Linde R 16 SN - 115-08 Linde R 20 - 1120-00 Linde R 20 N - 1120-00 - front extraction Linde R 20 N - 113-00 Linde R 20 SN - 115-08 Linde V 10 E - 14 - vertical extraction Linde V 10 E Linde V 12 E - vertical extraction Linde V 12 E - vertical extraction Still EK 11 Still FM 14 N Jungheinrich EKS 312 Jungheinrich ET 214 Jungheinrich ET 216 Jungheinrich ETM 214 Jungheinrich ETV Jungheinrich ETV 112 Jungheinrich ETV 216 Jungheinrich ETV Q Jungheinrich ETV Q 20 Jungheinrich ETV Q 25 Crown ESR 5220 Crown ESR 5220-1.4 Crown ESR 5220-1.6 Caterpillar NR16N2C Hyster K1.0H Steinbock-Boss WR 16 Other common battery sizes available on request. Transport possible.

Condition: good (used), Technical specifications for the shelf: Racking system: SSI Schäfer Type: R 3000 Scope of delivery includes: Shelves, used Material color: sendzimir galvanized Total width: approx. 1,280 mm Hodswvt Umopfx Ab Dsw Total depth: approx. 775 mm for upright depth: approx. 800 mm Height: approx. 40 mm Weight per piece: approx. 11.68 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item will incur extra costs, which can be provided upon request depending on the place of delivery and scope of delivery.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, input voltage: 400 V, For sale: M&R Sportsman EM 1210 screen printing carousel for textile printing. The machine is in working condition, has been in our facility since new, and has low usage (470,000 prints). Hjdpfxjxfkm No Ab Dow In other listings, we offer various textile printing accessories: M&R Sprint M2000 gas dryer, flash cure units, 80 Newman-roller screen frames, Trilock rapid registration system, and much more.

Condition: good (used), functionality: fully functional, Year of construction: 2016, operating hours: 500 h, Bunker dosing belt by R&T Recycling Technik Year of manufacture: 2016 Capacity: 2.5 m³ Drive: 1.5 kW Frequency-controlled feed belt Hjdpfjxcuvijx Ab Djw This system was integrated into a small pilot plant for approximately 3 months in 2016. The unit is in excellent condition and ready for operation. As shown in photo no. ..., this unit can be transported on a large tandem car trailer.

Condition: good (used), functionality: fully functional, 8LSA44.E3030D000-0 Hsdpfxeufxvke Ab Dew IN 2,8A - MN 4,6NM - NN3000MIN' - IP64 - I0 3,7A M0 6,0NM - UN400Vac Serial number: 75480235523

Condition: used, B&R 2NC Injection Module- refurbished by the manufacturermanufacturer: B&R type: NC303 manufacturer no.: 2NC 3 months warranty: This is provided exclusively by a manufacturer's inspection. The processing is carried out by Complast the spare part is traded in as an exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Hodpfxjnyukhj Ab Djw Dition: überholt

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 48 V, total height: 784 mm, total length: 1,035 mm, total width: 533 mm, Tested forklift battery for your truck - 48V 5PZS 775Ah - DIN B + 1-year warranty + Includes Aquamatic system + Includes end discharge cables & REMA 320 plug (other plug types can be fitted upon request) + Capacity: min. 90-100% (C5 capacity protocol supplied with delivery) + Year of manufacture: 2024 Dimensions: Length 1,035 mm Width 533 mm Height 784 mm Weight: approx. 1,160 kg Suitable for the following models and more: Linde A (1120) - 5022-00 Linde A - 5224-00 Linde E 16 - 386-00 Linde K - 5231-00 Linde K - 5231-00 - side battery change Linde K 10 Linde K 12 Linde R 14 N - 1120-00 Linde R 14 N - 1120-00 - front battery change Hsdpowzvwbefx Ab Dow Linde R 16 N - 1120-00 Linde R 16 N - 1120-00 - front battery change Linde R 16 N HD - 1120-00 - front battery change Linde R 20 N - 1120-00 Linde R 20 N - 1120-00 - front battery change Linde R 20 N - 113-00 Linde R 20 N - 113-00 - vertical battery change Linde R 20 SN - 115-08 - vertical battery change Still EK 11 Still FM-X 14 N Still MX 10 Still R 20-16 Still RX 20-18 Still RX 20-18 P Still RX 20-20 Still RX 20-20 PL Jungheinrich ETM 214 Jungheinrich ETM 216 Jungheinrich ETV Jungheinrich ETV C 16 Jungheinrich ETV Q 20 Crown ESR 5220-1.6 Caterpillar NOH10NH Caterpillar NR20NH Common battery sizes available - please enquire. Delivery possible.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: PL071105402R, M&R dryer with a belt width of 122 cm. The dryer is in excellent condition and is powered by electricity. The belt is wide enough to accommodate two rows of textiles side by side! We have already dismantled the dryer and prepared it for shipping. Therefore, there are no dismantling costs. We will also handle the loading onto the truck. A shipping company is available on site. The shipping price depends on the destination. We recommend direct transport! Hsdpfx Abew Stp Ij Dsw

Year of construction: 2013, condition: ready for operation (used), A plastic processing system consisting of a press and an injection moulding machine is available. Conversion: 2016, press type: top ram press, pressing force: 200t, injection force: 400t, table dimensions X/Y: 2100mm/1400mm, power stroke: 2000kN, power stroke distance: 2122mm, nozzle advance: 430mm-470mm, connected load: 60kW, total system weight: approx. 35000kg. Injection moulding tools: min. dimensions X/Y/Z: 1450mm/1000mm/750mm, max. dimensions X/Y/Z: 2100mm/1400mm/750mm, max. tool force tolerance: 4000kN. Press tools: min. dimensions X/Y/Z: 1000mm/1000mm/750mm, max. dimensions X/Y: 2100mm/1400mm, max. Z dimensions (press opening stroke) at tool heights 750mm/1000mm/1250mm: 1050mm/800mm/550mm, max. tool force tolerance: 2000kN. Documentation available. An on-site inspection is possible. Hedjw R Dhxjpfx Ab Djw

Condition: used, functionality: unexamined, Ferwood Code: RU0009348 - Manufacturer Code: - Condition: Used - Functionality: Not tested - If interested we offer a revision service, contact us. Hsdpfx Aev Hzukjb Dew

Condition: used, B&R Automation Terminal Unilog B6 - consisting of monitor, keyboard and housing - removed from Battenfeld VM75/60V/60V R1040 - removed from running machine - fully functional - year of manufacture 2014 manufacturer: B&R type: B6 manufacturer no.: keyboard: 5E9 monitor: 5AP92K63 spare part no.: keyboard: monitor: EPK Hodpfxjihqk De Ab Dsw Dition: gebraucht

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 48 V, total height: 782 mm, total length: 1,220 mm, total width: 424 mm, Tested forklift battery for your forklift - 48V 5PZS 775AH - DIN C + 1 year warranty + includes Aquamatik (automatic watering system) + includes end connectors & REMA 320 plug (other plug types available upon request) + Capacity: min. 90-100% (C5 capacity protocol provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,220 mm Width 424 mm Height 782 mm Weight: approx. 1,150 kg Suitable for the following models and others: Atlet REACH TRUCK Atlet UHD 250 Atlet UHS Atlet UMS 160 Atlet UND 140 Atlet UNS 200 Caterpillar N Caterpillar NR16N2H Caterpillar NR16NH Caterpillar NR20N2H Caterpillar NR20NH Caterpillar NR20NHA Caterpillar NR25N2X Hjdpowzvv Rjfx Ab Dew Caterpillar NR25NH Crown ESR Crown ESR 3020-1.4 Crown ESR 3020-1.6 Crown ESR 3020-2.0 Crown ESR 4000-1.4 Crown ESR 4000-1.6 Crown ESR 4000-2.0 Crown ESR 4500 Crown ESR 4500-1.4 Crown ESR 4500-1.6 Crown ESR 4500-2.0 Crown ESR 5000 Crown ESR 5000 S Crown ESR 5000-2.0 Crown ESR 5260 Crown ESR 5260-1.4 Crown ESR 5280 Crown ESR 5280S-1.6 Crown ESR 5280S-2.0 Hyster R1.0 Hyster R1.4 Hyster R1.4H Hyster R1.6 Hyster R1.6HD Hyster R2.5 Jungheinrich ETV Jungheinrich ETV 214 Jungheinrich ETV 216 Jungheinrich ETV 320 Jungheinrich ETW 216 Linde A (1250) – 5022-00 Linde A – 5224-00 Linde R 14 – 1120-00 Linde R 14 – 1120-00 – frontal battery change Linde R 14 G – 1120-00 – frontal battery change Linde R 14 HD – 1120-00 Linde R 14 HD – 1120-00 – frontal battery change Linde R 16 – 1120-00 Linde R 16 – 1120-00 – frontal battery change Linde R 16 – 115-00 Linde R 16 AS – 1120-00 – frontal battery change Linde R 16 AS 1270 – 1120-00 Linde R 16 G – 1120-00 – frontal battery change Linde R 16 HD – 1120-00 Linde R 16 HD – 1120-00 – frontal battery change Linde R 16 S – 115-00 Linde R 16 S ACTIVE – 115-12 Linde R 20 – 1120-00 Linde R 20 – 1120-00 – frontal battery change Linde R 20 – 115-00 Linde R 20 G – 1120-00 – frontal battery change Linde R 20 HD – 1120-00 – frontal battery change Linde R 20 W – 1120-00 – frontal battery change Linde R 25 – 1120-00 Linde R 25 – 115-00 Linde R 25 F – 8923-00 Linde R 25 W – 1120-00 – frontal battery change Mitsubishi RB14 Mitsubishi RB14-25 Mitsubishi RB14N Mitsubishi RB16 Mitsubishi RB16NH Mitsubishi RB25N2X Still FM 14 Still FM 17 Still FM 20 Still FM-4W 25 Still FM-X 12 Still FM-X 14 Still FM-X 17 Still FM-X 20 Still FM-X 25 Yale MR 16 Common battery sizes are available – please enquire. Transport possible.

Condition: used, B&R 2010 DO430 digital output - housing renewed - compatible with all B&R 2010 controls - removed from running machine - removed from Ferromatik MV 200-970 - fully functional Hsdpfx Aew Ah Nxjb Djw manufacturer: Ferromatik Milacron type: B&R 2010 sparepart no.: 10010690 manufacturer no.: 2DO430.6

Condition: used, B&R Provit controller 5C2001- removed from Battenfeld BA 6 CDC - removed from running machine - fully functionalmanufacturer: B&R manufacturer no.: 5C2001.18 spare part no.: BR177 Hedpfjiyzv Sox Ab Dsw If the spare part is traded in as an exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Dition: gebraucht

Condition: used, B&R 2005 CP152 / 10010792 / CP152.9 - compatible with all B&R 2005 controls - housing intact or renewed - removed from running machine - fully functional manufacturer: B&R type: B&R 2005 spare part no.: 10010792 manufacturer no.: CP152.9 Hodpoimw Sujfx Ab Djw Dition: gebraucht

Condition: used, B&R Provit Controller 5C2001- removed from K-Tec 200-1000S - removed from running machine Hodpfjp Rb Hcjx Ab Dsw - fully functionalIf the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the ufacturer: B&R spare part no.: 1 manufacturer no.: 5C2001.16 Dition: gebraucht

Condition: used, B&R / 8V1 Acopos 1022 servo amplifier- refurbished - 3 months warranty: This is done exclusively by a manufacturer's inspection. The processing is carried out by Complast GmbH. Hodpfjp Rb Iasx Ab Dew - taken out of running machine - fully functionalmanufacturer: B&R type: 1022 manufacturer no.: 8V1Bitte achten Sie vor dem Kauf darauf, ob der von Ihnen benötigte Acopos ebenfalls einen 12-poligen grünen Stecker hat. If the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Dition: überholt

Condition: used, B&R Acopos 1016 servo drive- removed from Remak RX43 - removed from running machine - Fully functionalmanufacturer: B&R type: 1016 Hjdorr Egaopfx Ab Dow manufacturer no.: 8V1 Rev. H0Before purchasing, please check whether the Acopos you require also has an 18-pin grey connector. If the spare part is traded in as an exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Dition: gebraucht