Used Glass Engraving Machine for sale (66,235)

Condition: good (used), With extended roller table • Type – SILIKANT – 2500 • Serial number – 7609 1-12 • Year of manufacture – 2001 • Belt size – 100 x 2500 • Roller table (total length) 4.10 m × 0.55 m • Center section – 1.20 m Dkedpouqlc Nofx Ac Nsh • Sides 2 x 1.45 m • Height – 1.02 m • Price upon request

Condition: good (used), - Type: 1300A - Serial number: 951313V - Open top - Dimension: - Total length: 4900 mm - Depth 1100 mm - Height 2300 mm - Washing machine 2100 mm - Inlet 1400 mm - Outlet 1400 mm - Washing height: 1500 mm - 2 pairs of brushes - Connected loads: 380V, 50Hz, 11kW - Price on request Dedpfxjq Ec D To Ac Njkh

Condition: used, • Belt grinder for glass with a large roller table and stops for grinding round glass • No. 55741-11/2 • Dimensions: W 2800 x D 900 x H 1600 mm • Table height approx. 900 mm Dkedpswckphjfx Ac Njh

Condition: good (used), • Electronic 11-spindle edge grinder and polisher for flat edges and miters, right-to-left operation • Edge angle 0 to 45 degrees Dkjdpforhilxox Ac Nsh • Type: TL 11 AV • Serial number 497-01 • Machine configuration o 2 x 150 mm diamond wheels for edges o (2) polishing wheels (150 mm) o (2) polishing wheels (150 mm) o (1) cerium-impregnated wheel o (1) 150 mm diamond wheel for rear hem o (1) 150 mm polishing wheel for rear hem o (1) 150 mm diamond wheel for front hem o (1) 150 mm polishing wheel for front hem Special price €6,500

Condition: good (used), Out of production • Type: XSM945P • Serial number: 20110702 • Glass thickness: 3 – 25 mm • 9 spindles • Minimum glass dimensions: 80 x 80 mm • Year of manufacture: 2011 • Available videos: • Power requirements: 400V, 50Hz, 40A, 20kW • Special price: €4,000 Dsdpfxoq Abyvo Ac Nekh

Condition: good (used), - Ready for immediate use - Feed speed: 0.5 - 5 m/min - Glass thickness: 3 - 55 mm - Can mitre grind up to 45° - 13 grinding and polishing wheels - Complete documentation available Dkjdpfxetqr Hps Ac Noh - Weight: 5700 kg - Has been regularly serviced and operated with a water treatment system, - very clean machine - Connected loads: 26 kW, 400 V, 50 Hz, 6 bar

Condition: good (used), - Recessed grip grinder - Year of construction 1981 Dkodpor Nviuefx Ac Nsh - Dimensions 1750 - 2300 x 1500 - 2700 x 800 mm (HxWxD) Price on request

Condition: good (used), - Completely overhauled by us, ready for immediate use Dodpjr Nvldsfx Ac Nokh - Type: 100013 - Serial number: 011136 - Glass thickness 2-12 mm - Minimum glass dimensions 120 x 80 mm - Max. Washing width: 1000 mm - Dimension: L=2900mm W=1650mm H=1250mm - Roller spacing 55mm -3 pairs of brushes / 1 pair of racks - Connected loads: 380/50V, 13kW - Price on request

Condition: used, • Horizontal glass washing machine in very good, well-maintained condition • 2 brushes, top and bottom, very good condition • Roller spacing 110 mm • Minimum glass dimensions 120 x 300 mm • Maximum washing width 1300 mm • External machine dimensions • Length 4500 mm, width 2000 mm, height 1250 mm • Inlet – 1000 mm, outlet – 1400 mm • Machine width – 2300 mm Dsdpfswl Dkqsx Ac Nekh • Price upon request

Condition: good (used), • Facet grinding machine • Year of manufacture 1990 • Comes from ongoing production • More information on request Dksdpfxsvxthte Ac Njh

Condition: used, Year of construction: 2017, functionality: unexamined, Used HEGLA Glass Packlifter & Sheet lifter with frame – Sold as Seen Offered for sale is a used HEGLA glass transport and handling system, comprising steel support frames, vertical transport racks, safety guarding, and an integrated access platform with stairway. Manufactured by HEGLA Maschinenbau GmbH & Co. KG (Germany), this robust industrial system is designed for the safe unloading of packs, and handling of large glass sheets within a production environment. Key details  Manufacturer: HEGLA Maschinenbau GmbH & Co. KG Type: Transporteinrichtung (Transport System) Year of manufacture: 2017 Load capacity: 3,000 kg Max load height: 2,550 mm Approx. machine weight: 940 kg CE marked Construction & features: Heavy-duty steel frame construction Multiple vertical glass support racks with rubber contact pads Integrated safety fencing and guarding Access platform with industrial steel staircase and handrails Overhead beam structure suitable for handling integration Floor-mounted and free-standing sections Dodpfxjx Tpg He Ac Nekh Condition: Used, with visible cosmetic wear including paint chips and surface marks consistent with normal industrial use Structurally complete and previously operational at time of decommissioning No testing carried out since removal Sale terms: Sold as seen No warranty given or implied Buyer responsible for inspection, loading, and transport Power, controls, and ancillary equipment only included where visible in photos

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2014, CE Glass 1600mm vertical glass washing and drying machine. The machine is serviced, thoroughly inspected, and ready for immediate use. Fitted with new water squeegee rubbers and new bearings. Working direction: right to left Max. washable glass height: 1600 mm Number of brushes: 4 Dryer fan Stainless steel cabin Water heating Background lighting Stop sensor The machine is fully checked, cleaned, and can be viewed in perfectly working condition at our site! Dksdpjx Tblnjfx Ac Nsh

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 4,440 mm, total width: 1,487 mm, total height: 2,793 mm, input voltage: 400 V, overall weight: 1,900 kg, input current: 16 A, ELECTRONIC VERTICAL DRILLING MACHINE FOR GLASS MODEL: PRIAM BRAND NEW Priam model is a two-spindle (double-sided) vertical glass drilling machine. It is designed for customers looking for a functional and easy-to-use machine that is also durable. When designing it, we went back to the old school of machine construction – on heavy, heat-treated steel bodies with mechanical solutions for subsequent easier operation and servicing. With this different approach to design and manufacturing, our machine ensures many years of trouble-free glass drilling, providing a multiple return on investment. Dodpfxed S Uhqj Ac Nekh To make sure that the components of our drill are made with due care, we manufacture them in Poland using local contractors. The main body is made on site, by our company, and then heat treated and processed further in local areas. This ensures that all production is carried out under our careful supervision, and any imperfections can be detected and corrected before the product reaches the customer. This ultimately also supports the local machinery industry. The product’s components are at the highest European level. Our suppliers include SIEMENS, HITACHI, UNITRONICS,SCHNEIDER,GARLOCK Mechanical components are accessible, while in-service replacement is simple and quick. The Expoglass Priam drill - functionality at the highest level: ⦁ 2 spindles (front and back) – allowing to drill the pane in a single pass – without turning it ⦁ Electronically controlled loading bar – in order to set the size of the bottom edge of the glass from the hole, you just need to enter the required size on the touch screen and the machine will automatically adjust to the right position ⦁ Quick drilling bit change mode – after pressing the drill bit change button, both spindles are automatically locked (they cannot be turned), the vertical table, located between both drilling bit, slides down – thus opening a large space between them. This means that the drill bits can be unscrewed without the use of a wrench, and there is plenty of space to perform this operation comfortably. ⦁ Automatic (electronic) measurement of the drill bits length and position – after the drill bits have been changed, the machine automatically calibrates them, measuring their length so that it knows the distance between the glass and the drilling end of each bit – very important in small plants where there are no series, but most of the holes are made individually ⦁ Automatic (electronic) calculation of spindle cavity depth – after automatic calibration of spindles, the machine measures the thickness of drilled glass by itself, by pressing the glass, and then selects the perfect values of cavities on its own. The operator's only task is to click the "drill" button, the process is completely automatic ⦁ Electronically controlled feed of the spindles – significantly increases machine capabilities, in addition to enabling the operation of most of the foregoing functionalities, it also makes the feed values perfectly adaptable to any situation and changeable with just a few clicks on the screen. This is illustrated, for example, by the fact that e.g. after drilling a 15 mm piece of glass, you take 10 seconds to change the settings, you can immediately drill a 2 mm glass pane without fear of cracking or chipping. And all this without the experience and "intuition" of the operator

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input frequency: 50 Hz, type of input current: AC, input voltage: 400 V, pressure: 6 bar, 8-disc glass grinding and polishing machine. In excellent working condition! 8 discs Glass thickness 3 - 35 mm Min. glass size 40X40 mm Speed ​​0.5 - 5m/min. Power: 19.5kW Power supply: 400V Djdpfx Aov Szxgjc Nokh The machine is in excellent technical condition, can be viewed, tested, and purchased at a pre-arranged time.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input voltage: 400 V, overall weight: 3,150 kg, type of input current: three-phase, Lisec spacer bar bending machine BSV-45ANK, year 2010, in best working order. The machine can bend aluminium profiles as well stainless steal. Dedpfx Aox S Hanoc Nskh The machine comes with an 8-slot profile magazine and a Vidojet printer.

Condition: ready for operation (used), Knopp Duplokant S2 Extra long roller table Connection 400V Dkedpfx Acom Udt Io Nsh

Condition: good (used), Bohle glass grinding machine with extended tables. Water cooling and abrasive belts. Dodpfex Av Tvjx Ac Njkh

Condition: excellent (used), Year of construction: 2001, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 361-006203, total length: 8,300 mm, total width: 1,700 mm, total height: 3,000 mm, input voltage: 400 V, overall weight: 3,400 kg, power: 10 kW (13.60 HP), Lisec VL-1N/20 sealing robot, year 2001, for double and triple glazing, consists of the following: RTVN-15/20VFE, sealing robot infeed conveyor with glass unit measuring device (glass and spacer frame) VL-1N/20, sealing robot, for sealing double and triple units up to a total unit thickness of 52 mm and unit size up to 3.5 x 2.0 m The machine is in good condition. It has been installed and operational with us since 2013. Regularly serviced and fully functional. Inspections in operation are possible until 28.02.2026. It will then be dismantled and ready for sale (loading). Dkodox Syhlopfx Ac Nsh The machine is available for collection from 01.03.2026.

Condition: used, functionality: fully functional, Breitner Filling Machine / Filling Line 8-head rotary filler with inductive flow measurement. Previously used for filling sauces and mustard. Dkjdpfx Acex Dx Raj Njh Brand: Breitner Type: IDR2885 Filling range: 10ml-10L Connected load: 4kW Approximately 100-120 containers per minute (at 250ml) All format parts and documentation are included with the machine.

Condition: ready for operation (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 520-003956, Lisec spacer bender Dsdpfx Aevktytoc Nokh Printer for spacers not available

Condition: ready for operation (used), Year of construction: 2023, laser power: 120,000 W, Main Drive Laser power 120 kW Technical Specification Engraving Speed 3000 m/s This 3-axis Trotec Speedy 360 laser engraving machine was manufactured in 2023. It features a CO₂ laser with a power range of 30–120 W and a work area of 610 x 305 mm. Capable of handling materials up to 10 mm thick, it supports a variety of materials including wood, acrylic, and glass. The machine includes an integrated extraction system and a color touchscreen interface. If you are looking to get high-quality engraving capabilities consider the Trotec Speedy 360 machine we have for sale. Contact us for more information. Application Types Dedpfxsx I S Nye Ac Nekh Other Sheet Metal Machinery

Condition: used, Year of construction: 1998, operating hours: 60,000 h, functionality: fully functional, machine/vehicle number: 6778 2-01E, Used single-head glass grinding machine. Dsdpfex Rp Sqjx Ac Nekh

Condition: used, Year of construction: 2001, operating hours: 60,000 h, functionality: fully functional, machine/vehicle number: 526/01, input voltage: 380 V, feed length X-axis: 1,250 mm, type of input current: three-phase, Used glass drilling machine with automatic ruler. In good condition. Djdpfxox Rp Rgo Ac Njkh

Condition: good (used), functionality: fully functional, For sale is a copy milling machine from Makre Franz Kuhlmann KG, GM 1/2 series. The machine is fully functional and ready for immediate use. Technical specifications: X-axis (longitudinal travel): 330 mm Y-axis (transverse travel): 200 mm Z-axis (vertical travel): 280 mm Template table: 500 x 400 mm Spindle speeds: 4,200 – 20,000 rpm Spindle mount: Collet bores up to 8 mm possible Motor power: 0.5 kW Dimensions: approx. 1145 x 1020 x 1620 mm (L x W x H) Weight: 430 kg Transport and loading can be arranged throughout Europe upon request for an additional charge. Dksdpfxjwal Dhe Ac Noh Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to help you. Trade-ins or exchanges are possible! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, visit our website.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, TECHNICAL DETAILS Type: TSM 15-10-UG Year of manufacture: 2012 Control type: NR4000.2.1 IPC MACHINE DETAILS Product designation: CNC marking machine Dkjdsx Iuhfjpfx Ac Neh EQUIPMENT Operating manual available