Used Glass Cutter for sale (6,552)

Condition: new, Pillar lift for cutter cart Made of stainless steel Lifting weight: 250 kg Ndjdpfevtz U Rjx Affof Dimensions: 1520x1300x2740mm Electrical power: 1.1kW Voltage: 380V 50Hz

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, Sanken Lasin laminointi kone Eva kalvolle , Prosessi esim Pujolin kalvolle Mitat 4100 x 2200 x 2250 paino 3350 , 4 petiä , petien koko 3200 x 1700 Nodpfx Ajv Idb Noffjdf

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: GM-1400H, total width: 3,000 mm, total length: 5,000 mm, total height: 3,250 mm, type of input current: three-phase, energy consumption: 60 kWh, input current: 80 A, workpiece weight (max.): 2,720 kg, power: 48 kW (65.26 HP), workpiece height (max.): 950 mm, warranty duration: 1 months, working range: 319 mm, number of chambers: 3, Equipment: adjustable chassis, Conveyors are produced in such a way that they will not scratch the glass and leave no stains. The machine is made of steel and aluminum materials. Thanks to specially designed water sprays and brushes, the glasses comes out completely free from oils, stains and dust and cleaned. Angles of water nozzles will be adjustable. Conveyor rollers are produced of Ø 55 mm vulcanized rubber . Induction hardened gears are used in transmission gears. There will be 3 Washing Cabins, pre-washing, washing and rinsing washing system. In the pre-washing section, the upper and lower surfaces of the glass are washed with high-pressure spray nozzles. In the same cabin ,will be compressed air to the upper surface of the glass with air knife and the water will be completely cleansed. Thanks to this process, the glasses will go into the wash without entering the brush washing compartment, free from their dirt. There are 6 Brushes (Ø 120 mm.) in the Washing Machine and they will be able to wash laminated glasses. 2 of the brushes will be in the inlet (pre-wash) and 4 in the outlet (rinse-wash). there are brushes in total, 2 piece of them at the entrance and 4 pieces at the exit. 2 of the brushes will be suitable for laminated glass washing. the other 4 brushes will be for normal standard use. Features of brushes to wash laminated glass is ; Bristle material will be 6.6 P.A. The bristle diameter will be 0.15mm. The bristle length will be between 30-35 mm. Brush shaft will be produced of ASI 304L quality stainless material. During washing, the brush suitable for the laminated coated glass, whose properties are given above, will come into contact with the surface of the glass. To the other part of the glass will come into contact standard glass washing brush. The washing and air drying section will have an elevator system with a 350 mm opening and closing structure for maintenance and cleaning. Thanks to the elevator, the glass thickness (3-19 mm) can be adjusted easily. The speed of the conveyors will be adjustable between 0 m/min and 5 m/min. There will be a sound insulation cabinet in the drying fan. 1 piece of G4 filter and 1 piece of F7 filter will be at the air inlet of the drying fan . The filters will be of standard size and can be changed and will be 592*592*20 mm square type. 23. Thanks to the powerful air knives, the glasses will come to the exit conveyor dry. Njdpfor Ak Exox Affedf The height of the air knives will be adjustable. All pipes and hoses in the machine will be in a matte color to prevent algae formation in daylight. 26. Digital displays and many electronic equipment will be Delta or Schneider brand. There will be a stop sensor at the exit of the conveyor to prevent the glass coming from the machine from falling to the ground. There will be lighting system in the washing exit area for quality control from the bottoms and top of the conveyor towards the glasses. These lightnings will have the ability to be switched on and off separately. There are 3 separate water tanks in the machine. There will be an overflow water line that will prevent the water in the water tanks from overflowing.

Condition: excellent (used), The line for gnocchi includes: - GLASS (Germany) cooking kettle, type PRO-3, tilting, 500 ltr. capacity , with mixing, vacuum and cooling - bin loader for 200 ltr. bins feeding the dough into the forming machine - SANDORE (Italy) forming machine , type NF 100 C, power 8.5 kW - segment feeder, type Z, feeding the product to the vibrating tunnel, width: 400 cm, height 200 cm, drying and cleaning the product (vibrating screens, blowing turbines) Ndsdpfx Afjfwmt Usfsf - SARP (Italy) vibrating tunnel, type STR 4107, power 4.7 kW - SARP (Italy) waste and water separator, model FILTRO, with vacuum extraction from a vibrating tunnel, power 2.2 kW - conveyor feeding to the weighing machine, type Z, height 500 cm - weigher platform with stairs, dimensions: 500 cm x 500 cm on posts 220 cm high - BVBA (Belgium) 10-head weigher, type 01AAH / WS - TIROMAT BL-150 (Italy) packing machine, type ETI 422N, linear packing machine for vacuum packing, 2 dimensions of forms - segment conveyor that discharges the finished product to the carton boxes packing warehouse, a spiral conveyor that outputs packages to a height of 260 cm + a straight section of 20 meters

Condition: reconditioned (used), Year of construction: 2018, STORK VS 24/8 Monobloc Bottling Line, fully refurbished by the professional company Z.M. ROBAK. The machine is virtually unused, with the protective film still on the housing. Currently, it is set up for filling glass containers – it has been test run for bottling alcohol. Filling valves: 24 pcs (with light vacuum for still beverages) Capping heads: 8 pcs (configured for aluminum screw caps) Output: approx. 7,000 bph (700 ml) Capable of operating with bottles of the following dimensions (after format adjustment): - Diameter: 45 mm to 110 mm - Height: 105 mm to 400 mm - Standard neck diameter: 28 mm - Optional neck diameter (after format change): 18 mm to 43 mm Machine dimensions: - Width: 2,900 mm - Height: 2,200 mm - Depth: 2,200 mm Weight: 3,200 kg Ndedpfxou Nhiqj Affjf Installed power: 5.5 kW Required air pressure: 0.6 MPa Year of manufacture/modernization: 2018 – has not been used in production since refurbishment Condition: The machine is practically as new, with negligible signs of use. The machine comes with original electrical documentation.

Condition: new, functionality: fully functional, power: 3 kW (4.08 HP), Year of construction: 2025, Equipment: air conditioning, cooling unit, G16 Type: Two chucks Ndsdpewz Ufwjfx Affjf

Condition: new, Cutter cart Made of stainless steel Dimensions: 600x600x500mm Ndedpfx Aevt Aicjffjf Volume: 200 liters

Condition: good (used), functionality: fully functional, Glass jar filling and closing line. 12 filling heads and 4 closing heads. Nedotqmvropfx Affjdf

Condition: used, functionality: fully functional, tank capacity: 1,000 l, The Glass VSM/F 1000 is a versatile vacuum mixer that optimizes the processing of meat, fish, fine foods, fruits, and vegetables. Thanks to its vacuum technology, it not only blends but also massages products, improving their texture and quality. Indeed, this mixer is ideal for operations requiring the use of nitrogen or direct steam injection. It also features a mixing arm with a scraper and an electric tilting system, facilitating product unloading. Furthermore, its pneumatic lid ensures safe and efficient operation. Furthermore, the Glass VSM/F 1000 offers a large processing capacity, making it ideal for companies looking to increase productivity. Thanks to its advanced features, it guarantees homogeneous mixing and optimal food preservation. Furthermore, its ergonomic design facilitates cleaning and maintenance, reducing downtime. In short, this vacuum mixer is an essential asset for improving the quality and efficiency of production processes in the food industry. SPECIFICATIONS: Power: 5.93 kW Current: 13.74 A Voltage: 400 V; 50 Hz Ndjdpfx Afeu Iafnefjf Volume: 1000 L Mj+KikOw

Condition: excellent (used), Glass cooking wok 300 litre and side wall scrape. With thermial oil boiler. Tilts both sides. Nsdpfoumb Hisx Affjdf

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 3,550 mm, total width: 2,600 mm, overall weight: 2,500 kg, space requirement height: 2,600 mm, space requirement length: 3,600 mm, space requirement width: 3,000 mm, 300-liter stainless steel reactor, manufactured by GLASS, model VAS 300. Year 2014. With agitator, jacket, and electrical panels. Motor specifications: 43.19 kW at 50 Hz, 400 V Volume Total capacity 300 L Material Stainless steel Technical specifications Model Nodpfjv Rr E Ijx Affjdf VAS 300 Year of manufacture 2014 Equipment configuration Agitator Jacket Electrical panels Transport information Length 3550 mm Width 2600 mm Height 2500 mm Weight 2500 kg Manufactured by Glass

Condition: new, functionality: fully functional, Year of construction: 2023, laser power: 3,000 W, power: 3,000 kW (4,078.86 HP), input voltage: 380 V, input frequency: 50 Hz, type of cooling: water, total length: 6,000 mm, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, NS-6022HG Tube laser cutting machine 3kw 3 Chuck Professional Pipe Laser Cutting Machine with automatic loading system with 6m automatic unloading with Chinese 3D bevel head-BLT tubes T CE Anti-radiation glass protective guards AVR KIT OF NOZZLE, LENS ETC(SPCS FOR EACH) Series: NS-HG Type: Three chucks Ndodpfowu Rm Rsx Affjf Groove function: Standard Power: 3KW Maximum pipe length: 7000mm Round pipe: Φ15mm-Φ220mm Square pipe: 15mm*15mm~150mm*150mm Rectangular pipe: 30*20mm~160*80mm Oval tube/flatoval tube: Short axis≥15mm, long axis ≤ 210mm Channel steel: Max20# I-beam: Max18# H steel: Max175*90mm Maximum acceleration: 1.0G Chuck maximum speed: 100r/min Machine weight: 10t Power supply specification: 380VAC, 50Hz Standard: Support servo (groove), dust prevention (Y axis), dust prevention (X axis), dust prevention (Z axis), safety fence (light curtain), zero tail material, cutting area dust removal, rear card hollow dust removal

Condition: new, Year of construction: 2025, pipe diameter (max.): 12,000 mm, travel distance X-axis: 12,000 mm, Equipment: cooling unit, safety light barrier, Three-chuck Heavy-duty Fiber Laser Tube Cutting Machine Ndodjv D Uhfepfx Affsf NS-12052HG 12000mm, 500 Chuck Servo drive is used for auxiliary feeding High-quality chuck Adaptive to different sizes of tubes Servo control, excellent performance Give the equipment ultra-high dynamic performance Auxiliary feeding system Reduce work intensity and improve efficiency More types of processed tubes Support flying cutting High-precision Z-axis control Bevel cutting Highly automated ≤2m workpieces are unloaded through servo flaps

Condition: new, functionality: fully functional, Year of construction: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, 3015H high-speed laser sheet metal machine High speed enables efficient processing 1.5G acceleration 50%–100% increase in thin sheet processing efficiency 7Hz low-pass filtering Enables high-speed, high-precision cutting of complex shapes Over 50% improvement in fine processing efficiency Ndjdpfx Afjwvpcmefef High speed and high efficiency drive high productivity Our high-speed cutting machine features a dual-station high-speed shuttle table Achieves 15-second fast parallel exchange Loading/unloading and cutting processes run simultaneously without interference significantly boosts processing efficiency Doubles output per unit of time Crafted with care for eco-friendly design Equipped with zoned dust extraction Features 8–30 fully automatic high-power negative pressure extraction systems Smooth smoke discharge and excellent dust removal efficiency In terms of safety, our high-speed machines are more considerate Standardized with an industry-unique intelligent anti-collision human detection system Includes door interlock protection and motor torque detection Ensures safe production Designed to reduce the workload in sheet metal processing Equipped with a fully automatic lubrication system A total of 16 automatic lubrication points across the XYZ axes Extends component lifespan by 300% Delivers higher running precision with lower maintenance costs

Condition: used, Cutter Manufacturer: Kramer Grebe Wetter Ndedpox Dcfnsfx Affof Bowl made out of stainless steel Dimensions: 290x244x210cm Control voltage: 230V Operating voltage: 400V / 50Hz Power: 74kW

Condition: used, Year of construction: 2021, Exhibition unit (little used) Unit for cutting soft materials such as honeycomb cores, acoustic elements and fabrics using oscillating movements Processing options: Cutting straight or radial cutouts Typical areas of application: • Textiles: Cutting fabrics or textiles (e.g. leather, felt, etc.) • Cutting honeycomb cores for doors, staircase construction, exhibition stand construction, caravan construction • Acoustic elements: Cutting polyester, foam or other sound-absorbing materials • Aviation, boat building, aerospace: Cutting honeycomb cores Technical specifications Max. input speed: 6,000 min-1 Max. output speed: 9,000 min-1 Gear ratio: 1:1.48 Max. torque: 8 Nm Permissible operating temperature: max. 85°C Position of the torque arm to the tool: 360° Processing angle: 0° Number of tool outputs: 1 / fixed Lubrication: Grease / lifetime grease filling Amplitude: 4 mm Frequency: 150 Hz Storage location: Garbsen Nedpfxsvvi Iqe Affjdf

Condition: good (used), Karl Tranklein EK-100 Corner Cutter Made in Germany. Nedpfjx Nc Aajx Affedf Very good condition. This is a professional, production-grade corner rounding machine. Sturdy cast iron construction and strong pressure ensure precise operation. Replaceable blades. Adjustable margins. One set of blades included. Stack height: 100mm Weight: 130kg Cycles per minute: 50 cycles/min Power supply: 400V Waste is collected in containers. This is the model currently in production.

Condition: good (used), Joint cutter, asphalt cutter, concrete cutter -Manufacturer: Cedima, joint cutter type CF 16.1D -Saw blade: Ø max. 480 mm -Engine: Hatz E 780U 7 kW -Dimensions: 1150/680/H920 mm Ndsdpfx Ajhzzb Rsffsf -Weight: 250 kg

Condition: good (used), HAAS Tool Grinding Machine Good condition, fully functional, can be inspected and tested on-site. Shipping also available abroad. Inspection: To avoid any misunderstandings, I would like to point out that the item can be inspected and tested under power before purchase. Please ask questions before purchasing to avoid any confusion. For general questions or to schedule an appointment for an inspection, you can contact me at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Nodpfxsv Nw Rts Affjdf Shipping via freight forwarder.

Condition: good (used), Year of construction: 1999, functionality: fully functional, number of drawers: 11, total width: 6,150 mm, total length: 6,000 mm, Glass storage rack with remote control 11 compartments Support surface: 250 mm Ndodpex N A Trofx Affjf Load per compartment: 6.5 t Max. glass height: 3,210 mm Total capacity: 71.5 t

Condition: like new (used), Knopp Glaskant S Workshop overhauled. Connection 400V With ball roller table. With water cooling on request (surcharge) Nsdevf Rndepfx Affedf

Condition: good (used), End mill, shank cutter, cutter, slot cutter, wood cutter -Two-knife cutter -Roughing-finishing end mill -4x: Milling cutter Ø 4 x 12 mm -7x: Milling cutter Ø 5 x 12 mm -10x: Milling cutter Ø 6 x 14 mm -1x: Milling cutter Ø 8 x 20 mm -5x: Milling cutter Ø 10 x 20 mm -4x: Milling cutter Ø 11 x 22 mm -3x: Milling cutter Ø 12 x 22 -Hole: Ø 10 mm -Type: M623 Ndedsb D I Axjpfx Affsf -Quantity: 34 pieces -Sale: only complete set -Weight: 3.6 kg

Condition: good (used), HAAS Tool Grinding Machine Good condition, fully functional, can be inspected and tested on-site. Njdpfov Nw Skex Affjdf Shipping also available abroad. Inspection: To avoid any misunderstandings, I would like to point out that the item can be inspected and tested under power before purchase. Please ask questions before purchasing to avoid any confusion. For general questions or to schedule an appointment for an inspection, you can contact me at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping via freight forwarder.

Condition: excellent (used), Knopp Duplex glass drilling machine double-sided. Ndjdpfoq Umcnex Affef Year of manufacture 2000 In good condition. With ball roller table, cross laser and infinitely variable speed control. Incl water cooling

Condition: good (used), Hahn+Kolb tool grinding machine - with many accessories - with optics - with operating instructions Ndsdpfx Afetku Dmofjf - largest grinding length: 110 mm - longitudinal adjustment: 180 mm - cross adjustment: 130 mm - Height of the machine: 1,500 mm - Weight: approx. 560 kg - Power of the grinding motor: 0.75 kW - Power of the coolant pump: 0.11 kW Good condition, fully functional, can be inspected and tested on site. Shipping also abroad. Inspection : Basically, I would like to point out that the item can be inspected and tested under power before purchase to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Shipping with forwarding agent.