Used Geberit Esg for sale (70)

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 30214501, turning length: 2,000 mm, total length: 12,000 mm, WFL Millturn M60/2000 WORKING RANGE center distance mm 2000 swing over bed, turning diameter mm 690 MAIN DRIVE AC-drive with 2 gear steps drive power 100% duty cycle kW 40 Isdpfx Ahsu Hl R Ts Netb max. speed min-1 3300 max. torque at the spindle 100% duty cycle Nm 1830 TAILSTOCK quill diameter mm 140 quill travel mm 160 quill force (adjustable) N 3500-31000 quill with installed live center MK 5 TOOL HOLDER (single tool holder, turning-boring-milling unit) AC-drive drive power 100% duty cycle kW 30 speed range max. min-1 6000 max. torque at the spindle 100% duty cycle Nm 315 travel vertical to the X/Z-plane (Y-axis) mm 300[-125/+175] pivot capability of the milling spindle (B-axis) ° -110/+90 spindle head acc. DIN 69893 HSK-A100 spindle diameter in front bearing mm 100 DIMENSIONS length (max. tool magazine) m 11 width/height m 3,9/3,3

Condition: used, maximum load weight: 69,220 kg, overall weight: 84,000 kg, axle configuration: > 3 axles, first registration: 01/2009, * ES-GE 6-axle ballast trailer * First registration: 2009 * Air suspension * 2 lift axles Iedpfjx Hckfox Ah Notb * 4 steering axles * SAF axles * Connection via NATO socket -> own hydraulic pump * Length: 15.10 m * Unladen weight: 14,780 kg * Gross vehicle weight: 84,000 kg * Payload: 69,220 kg

Condition: like new (used), Year of construction: 2019, functionality: fully functional, input voltage: 220 V, Equipment: documentation/manual, Microscopic 3D inspection scanner with measurement envelope of 1.6 x 1.2 x 0.8mm, height resolution 0.1 µm. The unit can take linear measurement in 3 dimensions and also measure edge radius between approximately 5µm and 100µm. It is complete with laptop loaded with the necessary software, dongle, and microscope stand. It has only been lightly used. Isdpjx Ekuisfx Ah Nstb

Condition: good (used), axle configuration: 3 axles, first registration: 05/2005, loading space width: 2,550 mm, total length: 13,580 mm, total width: 2,550 mm, total height: 880 mm, wheelbase: 9,540 mm, color: other, Year of construction: 2005, Structure Dish height: 118 cm = More information = Empty weight: 11.260 kg Carrying capacity: 36.740 kg GVW: 48.000 kg Height of cargo floor: 88 cm APK (MOT): tested until 09/2026 Technical condition: good Visual appearance: good Registration number: OS-38-TP = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: Itjdpfxoxqbg Re Ah Neb - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Condition: good (used), axle configuration: > 3 axles, loading space length: 24,700 mm, loading space width: 2,540 mm, loading space height: 830 mm, total length: 24,700 mm, total width: 2,540 mm, total height: 830 mm, suspension: air, tire size: 205 / 65 R17.5 | load index 130F, color: green, Year of construction: 1999, Colour: Green Payload: 38,500 kg Extendable Main Features Manufacturer: ES-GE / Faymonville Model: Multi-Z5LAAX Chassis number: W0GSLH553XEE32322 Year of manufacture: 1999 Weights / Load Capacity Fifth wheel load: 18,000 kg Axle load: 7,000 kg Total axle load: 5 x 7,000 kg = 35,000 kg Gross vehicle weight (GVW): 53,000 kg Unladen weight: 14,500 kg Payload capacity: approx. 38,500 kg Axles Axle make: SAF Air suspension Axles 2-5 with forced steering High/low valve WABCO braking system with EBS Tyres: 205/65 R17.5 | Load index 130F Dimensions Overall length: 12,800 mm Loading platform length: 8,800 mm Extensions: +5,800 mm / +6,100 mm Max. extended length: 24,700 mm Loading platform width: 2,540 mm Height: 830 mm (+100 mm / -60 mm) Fifth wheel height: approx. 1,280 mm = Further Information = General Information Year of manufacture: 1999 Axle Configuration Tyre size: 205/65 R17.5 | Load index 130F Axle brand: SAF Suspension: Air suspension Iodpfxjxyh Tve Ah Netb Rear axle 1: Dual tyres; Max. axle load: 7 t Rear axle 2: Dual tyres; Max. axle load: 7 t; Steered Rear axle 3: Dual tyres; Max. axle load: 7 t; Steered Rear axle 4: Dual tyres; Max. axle load: 7 t; Steered Rear axle 5: Dual tyres; Max. axle load: 7 t; Steered Weights Unladen weight: 14,500 kg Payload: 38,500 kg Gross vehicle weight: 53,000 kg Functional Extendable superstructure: Yes Condition Technical condition: Good Visual condition: Good Financial Information Price: On request Further Information Please contact Stefan Schaapveld for more details.

Condition: used, maximum load weight: 15,950 kg, overall weight: 20,500 kg, axle configuration: 2 axles, first registration: 10/2018, next inspection (TÜV): 05/2026, loading space width: 2,480 mm, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. - SAF axles - Technical axle load: 10,000 kg each - Air suspension with lift and lower valve - Brake system with EBS - Tyres: 265/55 R19.5 Itedpfx Ahewtv Hme Nob - Ramp holder - Mechanically adjustable drawbar for length, 6 x approx. 100 mm - 40 mm towing eye, interchangeable for 50 mm - 3 pairs of stanchion pockets in the outer frame - 4 rows of stanchion pockets crosswise to the loading area - Widenable container locks for 1x20' - Rear extension - Side boards - 4 x stainless steel toolboxes - Single-color paint finish in RAL 3002 carmine red

Condition: new, maximum load weight: 56,570 kg, overall weight: 66,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment list. Complete specifications available upon request. Chassis: * Frame construction made of welded longitudinal beams and inserted cross beams * Underrun bar width approx. 700 mm * Fifth wheel plate at least approx. 8 mm thick, positioned between the longitudinal beams * Maximum crossmember spacing 400 mm (for longitudinally laid floor) * 3.5-inch king pin according to SAE standard, replaceable * Outer frame as UNP 200, open to the outside * Technical saddle load 26,500 kg Landing Gear: * 24 t telescopic landing gear JOST - MODUL CH (Heavy Duty) S-foot Axles: * 4 x 10 t SAF axles with large drum brakes * 22.5 single tires Itjdswx Dctepfx Ah Neb * Axle spacing approx. 1,700/1,810/1,810 mm * Air suspension system with 10 t load capacity each * Lifting and lowering device with 1 rotary slide valve Knorr/Wabco * Bracket for lifting and lowering device, bolted design Brakes: * Smartboard/TIM/Infocenter on bracket for lifting and lowering, in addition to the lift/lower valve * Without battery (operable only with towing vehicle) * Bracket for lights and brakes at the front of the underrun bar, total height approx. 700 mm * Basic version of tire pressure monitoring, connected to the EBS CAN bus system * With dual-release valve for brake and spring actuator * Test nipple for brake cylinder pressure at the front right brake cylinder * 1 coupling head each red and yellow * Lifting and lowering device mounted at the rear left (in the direction of travel) * EBS brake system by Wabco * EBS diagnostics via CAN bus (EBS plug), no external diagnostic cable provided! Tyres: * 8 x 445/65 R 22.5 - brand of our choice * Hub centering Lubrication: * Grease nipple strips on bogies and at the front of the steering system * No central lubrication Body: * Without body certificate according to DIN EN 12642 XL * 2x LED work lights on top of the front wall (facing rearwards), switch on lift/lower bracket * Heavy-duty front wall for platform * Side contour marking in yellow, rear in yellow * Front wall approx. 800 mm high, with sheet metal cladding, bolted design Lighting system: * 2x LED work lights mounted in the lamp plate, switched via reverse gear * 2x LED work lights, switched via reverse gear, 1 each side near landing gear * 2x LED reversing lights, 1 per side in front of 1st axle * Lighting/wiring system brand of our choice * License plate illumination * The towing vehicle must provide sufficient power for the selected lighting (esp. reverse light) * Front position lights, lower, white, 1 each right and left (LED) * 24 Volt lighting system with large multifunctional lamp * Side marker lights (LED) flashing * 1 x 15-pin and 2 x 7-pin connections at the front via multifunction box * EBS socket * 1 pair of lane departure lights (LED) Floor: * Hardwood floor approx. 28 mm, alternately with galvanized omega steel profiles Paint/Coating (no metallic colors): * Chassis painted in RAL 3002 flame red * Front wall (steel construction) painted in RAL 3002 flame red * Axle hubs in chassis color * Axles and landing gear in black * Wheels in aluminum/silver, similar to RAL 9006 * Wheel nuts untreated * Underrun protection painted in RAL 9010 pure white (aluminum) Accessories: * Lifting device for 1st axle * 9 hook plates welded into the outer frame per side. Lashing load max. 3,000 daN * 12 per side

Condition: used, maximum load weight: 32,340 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 07/2024, next inspection (TÜV): 07/2025, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full equipment details available upon request. Chassis * Welded construction made from high-grade steel profiles with punched-through crossmembers, designed for high point loads Coupling Device * 2-inch kingpin Underrun Protection * Bolted version, compliant with EU regulations Side Guard Protection * Compliant with EU regulations Landing Legs * 2 x 12 t landing legs with compensating foot and single-sided operation (right side in direction of travel) Axles * 3 x 9 t air suspension axle assembly * Disc brakes * Manufacturer: Gigant Brake System * Dual-circuit compressed air brake system compliant with EU regulations with EBS and RSS * Automatic load-dependent control * Spring-actuated cylinders for parking brake Itedpfx Ahewbb Ufj Nob * Reversed polarity-safe coupling heads, permanently mounted on the front crossmember (no connecting line to tractor unit) * Manufacturer: Wabco Tyres * 6 units, 385/65 R22.5 160J on steel rims 11.75 x 22.5 ET 120 Mudguards * Compliant with EU regulations * PVC mudguards in front of and behind the axle assembly Spare Wheel Carrier * 1 double basket incl. mounting material for one spare wheel with ET 120 Load Securing * 9 pairs of foldable lashing rings, evenly distributed, tensile force approx. 8.0 t * 8 pairs of foldable lashing rings, evenly distributed, tensile force approx. 2.5 t * External frame with drilled holes every approx. 500 mm for tension belts Front Wall * Reinforced steel construction, fixed * Inside lined with approx. 9 mm screen-printed flooring (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor recessed into the external frame Lighting System * Compliant with EU regulations, 24 Volt, with multi-chamber lights * LED side marker lights * LED position lights front (white) * LED outline lights at rear * Number plate lights * 1 x 15-pin and 2 x 7-pin plug connections on the front crossmember Paintwork * Chassis and front wall blast-cleaned, primed, and painted in a single color * Chassis: RAL 3002 carmine red * SSV: anodized aluminum * Underrun protection: white (RAL 9010) * Add-on parts: galvanized/KTL black * Rims: silver Additional Equipment * First axle liftable, with fully automatic, load-dependent lifting control * 10 pairs of stake pockets in the external frame, evenly distributed * 4 rows of stake pockets across the load floor * 20 pieces of stakes, galvanized tube 80/50, total length approx. 1,000 mm * Inside the front wall, a magazine for 20 plug-in stakes * 5 x 25 side and rear boards made of anodized aluminum hollow profiles, approx. 600 mm high, folding and removable * Removable Kinnegrip stakes * Sliding rails under the chassis left and right for side boards and stakes * Work light on lamp bracket (activated via reverse gear) * 2 PVC toolboxes, approx. 660 x 400 x 500 mm

Condition: used, maximum load weight: 32,610 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2023, next inspection (TÜV): 11/2025, total width: 2,550 mm, Equipment: ABS, You can find our complete selection of vehicles with immediately and short-term available units on our website. Sample from the equipment list. Full equipment details available upon request. Chassis: * Welded construction made from high-quality steel profiles with through-profile cross members, designed for high point loads. Coupling Device: * 2-inch king pin Underrun Protection: * Bolted version, compliant with EC regulations Side Impact Protection: * EC compliant Landing Legs: * 2 x 12 t landing legs with compensating foot and one-sided operation on the right hand side (FR) Axles: * 3 x 9 t air suspension axle assemblies * Disc brakes * Brand: Gigant Brake System: * Dual-line compressed air brake system compliant with EC regulations, equipped with EBS and RSS, automatic load-dependent control * Spring brake cylinders as parking brake * Foolproof coupling heads permanently mounted on front crossmember, without connection line to tractor unit * Brand: Wabco Tyres: * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120 Mudguards: * EC compliant, PVC mudguards in front of and behind the axle assembly Isdpswyhy Eofx Ah Notb Spare Wheel Carrier: * 1 piece double basket with mounting hardware for one spare wheel with ET 120 Load Securing: * 9 pairs of foldable lashing rings, evenly distributed, tensile force approx. 8.0 t * 8 pairs of foldable lashing rings, evenly distributed, tensile force approx. 2.5 t * Drill holes for tie-down straps approximately every 500 mm on the outer frame Front Wall: * Reinforced steel construction, fixed * Interior lined with approx. 9 mm phenolic plywood floor (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor set in outer frame Lighting System: * EC compliant, 24 Volt, with multi-chamber lamps * LED side marker lights * LED front position lights (white) * LED rear outline marker lights * Number plate lights * 1x 15-pin and 2x 7-pin plug connectors on front crossmember Paintwork: * Chassis and front wall sand-blasted, primed and painted in single color * Chassis: RAL 3002 carmine red * SSV: aluminium anodized * Underrun protection: white RAL 9010 * Attachments: galvanized/KTL black * Wheels: silver Including Special Accessories: * First axle liftable with fully automatic, load-dependent lift control * 10 pairs of stake pockets in outer frame, evenly distributed * 4 rows of stake pockets crosswise to loading area * 20 stakes made of galvanized pipe 80/50, total length approx. 1,000 mm * Storage magazine for 20 plug-in stakes on inner front wall * Twistlocks for 1 x 40’ and 2 x 20’ containers, flush-mounted at the rear * Twistlocks for 1 x 20’ container in middle position * Work light on lamp bracket (switched via reverse gear) * 2 PVC toolboxes, approx. 660 x 400 x 500 mm

Condition: new, maximum load weight: 63,960 kg, overall weight: 76,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. The following is an extract from the specification. Complete specification available on request. Chassis: - Welded construction made of high-quality steel profiles with through-go crossmembers, designed for high point loads - Outer frame made of UNP steel Coupling equipment / fifth-wheel load: - 2-inch kingpin - Technically permissible fifth-wheel load: 26,500 kg Underrun protection: - According to EU regulations, bolted design Side impact protection: - According to EU regulations Landing legs: - Landing legs with single-side operation, support load approx. 66 t / lifting capacity approx. 24 t Axles: - 5 x 10 t air suspension axle units, make: SAF, with drum brakes approx. 400 x 200 mm - ABS - Wheel attachment, center-bored, 10-hole, offset ET 0 - Total air suspension stroke: approx. 200 mm, lift approx. 140 mm, lowering approx. 60 mm; control via rotary valve with detent function Steering: - 1 axle with leading steering, 2nd axle rigid, 3rd, 4th, and 5th axle with mechanical forced steering (Tridec) - Greasing points are routed centrally to the outside Axle lift: - First and second axle automatically liftable, with additional cut-off at the chassis Isdpfx Aowx Dcaoh Netb Brake system: - Two-line pneumatic brake system according to EU regulations with EBS and RSS, automatic load-dependent control, make: Wabco 4S/3M - Spring-actuated cylinders as parking brake - Interlocked coupling heads mounted securely on the front crossmember, no connecting line to the towing vehicle - Aluminum air tank Tyres: - 10 x 445/65 R22.5 164J on rim 11.75 x 22.5 ET 0 – brand of our choice TPMS: - Tire pressure monitoring system - TPMS according to ECE R141, with data transmission to towing vehicle Fenders: - According to EU regulations: 1st axle front, 2nd axle rear, 3rd, 4th, and 5th axle each front and rear with 1/4 PVC fender - Rear fender with mud flaps Load securing: - 5 pairs of folding lashing rings, evenly distributed (pulling force approx. 14 t) - 11 pairs of hook plates welded into the outer frame (pulling force approx. 3 t) - 10 pairs of lashing rings in the side outer frame, evenly distributed (pulling force approx. 8 t) Stake pockets: - 10 pairs of stake pockets set into the outer frame - 6 pairs of stake pockets set into the floor (at the outer longitudinal beam) Removable stakes: - 16 pieces galvanized plug-in stakes, approx. 80 x 80 x 8 mm, usable length approx. 850 mm Stake magazine: - One magazine per side in front of the front wall, each for 8 plug-in stakes approx. 80/80 mm Front wall: - Bolted corner stakes filled with aluminum hollow profiles, inside with a steel collision plate across the entire width and height Floor: - Approx. 28 mm Z hardwood flooring, let into the outer frame, flush-mounted Lighting system: - According to EU regulations, 24 V with multi-chamber lamps - LED side marker lamps - LED position lamps white front - LED outline marker lamps rear - License plate lamps - 1x15 and 2x7-pin plug connections on the front crossmember Equipment: - Wheel chocks with double holder - Warning sign in accordance with ECE 70 - Work spotlight on lamp mounting (activated via reverse gear) - Holder for rotating beacon at the rear (incl. rotating beacon) - 1 piece climbing ladder mounted rigidly on each side left and right, incl. removable climbing aid - Smart Board - Sticker indicating vehicle swing-out - Sticker indicating load cen

Condition: used, empty load weight: 10,850 kg, overall weight: 65,000 kg, axle configuration: 4x2, first registration: 06/2005, tire size: 235/75 R17,5, wheelbase: 1,310 mm, color: yellow, Equipment: ABS, Drum brake Payload: 54,150 kg Air-lift suspension Telescopic up to 6,300 mm Max. total length: 19,450 mm Extendable to 3,000 mm Gigant axles 3rd and 4th axle steered trailing axles Lifting and lowering device Iodpfx Aoxuf Dnoh Netb Errors excepted

Condition: excellent (used), functionality: fully functional, Year of construction: 2025, control type: NC control, degree of automation: semi-automatic, actuation type: electric, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, hardened rollers, Pellet press for rent – suitable for wood, plastics (PE, PET), and agricultural by-products. Available: 4 kW (50–100 kg/h) or 22 kW (200–350 kg/h). Comes with various dies for different materials. Ideal for trial runs, pilot projects, and temporary production. Flexible rental periods, delivery, and support available. 👉 Henkes Industries GmbH Ijdpfxextwyre Ah Nstb

Condition: new, maximum load weight: 9,840 kg, overall weight: 13,500 kg, axle configuration: 2 axles, loading space length: 6,850 mm, loading space width: 2,480 mm, Equipment: ABS, You can find our complete vehicle stock with immediately and short-term available vehicles on our website. Excerpt from the equipment list. Complete specification available upon request. Chassis: * Steel welded construction with welded longitudinal beams and perforated Z-cross members * Tight cross member spacing for high floor load capacity * Ramp storage between the longitudinal beams behind the axle assembly * Two insertion pockets for one loading ramp each located below the loading floor, with closing plate in the rear end frame Front Support: * Support winch with single-side operation Drawbar Equipment: * Height-adjustable rigid drawbar with bolted towing eye approx. 40 mm according to DIN * Height adjustment +/- 150 mm Rear Support: * Two adjustable drop legs Running Gear: * 2 x 7 t air suspension axle assembly, make: SAF * Drum brakes approx. 300 x 150 mm * Wheel connection 10-hole, center-bolted for single tires * Total air suspension lift approx. 180 mm, of which lift approx. 150 mm and lower approx. 30 mm * Control via hand lever with latching function Tyres: * 4 x 285/70 R 19.5 – manufacturer at our discretion * On 8.25 x 19.5 steel rims, manufacturer at our discretion Splash Protection: * PVC mudguards in front of and behind the axles * In accordance with EU regulations with rear mudflaps Load Securing: * In the outer frame, a lashing rail for tension belts every approx. 200 mm, lashing force approx. 2.5 t * 6 pairs of foldable lashing rings evenly distributed, lashing force approx. 8,000 daN * Stake pockets for insert stakes 80/50 * 3 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets transverse to the loading area, evenly distributed Brake System: * Air brake system according to EU regulations with EBS and a red/yellow coupling head each on the connection plate at the drawbar * As a connection to the towing vehicle, a double-coil with 1 coupling head red/yellow and 1 duomatic coupling * Spring-actuated parking brake acting on one axle Floor: * Approx. 28 mm Z-hardwood floor inlaid in the outer frame * Wheel arch area with sheet metal covering * Floor capacity: forklift driveable up to approx. 5 tons Container Locks: * Container locks for 1 x 20 ft. container according to ISO 1496, EN 284 or EN 452-1 * Additional container locks for 1 x 10 ft. at the front according to ISO 1496, EN 284, or EN 452 Lighting: * Lighting system according to EU regulations, 24 Volt * Multi-chamber rear lights, license plate lights, side marker lights, and contour marker lights at the rear * Connection plate at the drawbar including connecting cable with 15-pin and 2 x 7-pin plugs Accessories included: * 1 plug-in rotating beacon at the rear with registration for continuous light * Additionally, with switch: 2 LED reversing lights at the rear on lamp bracket, operated via reverse gear * Side and rear welded forklift bump stops Itsdpfx Asxc Axxjh Neb * 1 stainless steel toolbox each left and right behind the axles * 6 x 25 cm side boards (3 per side) and front/rear wall made of anodized aluminum hollow sections, approx. 600 mm high * Side boards foldable and removable, removable Kinnegrip stakes (internal width approx. 2,480 mm) * Sideboard/stake magazine at the front on the front wall * 1 additional mounting plate including parking sockets for air/electricity/EBS Painting: * Chassis hot-dip galvanized * Side boards RAL 9010 Pure White * Hubs KTL-Black * Rear underrun guard RAL 9010 White * Rims RAL 9006 Silver * Vario

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment. Full equipment details on request. Chassis: * Welded construction made of high-quality steel profiles with punched profile cross members, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Wear plate approx. 8 mm * Neck height at the front approx. 130 mm Towing Device * 2” kingpin Underrun Protection * Bolted version, compliant with EU regulations Side Guard Protection * EU-compliant, made of anodized aluminium profiles Landing Legs * 2 x 12 t landing legs with compensating foot and single-side operation on the right (FR) Axles * 3 x 9 t air-suspension axles * 22.5" disc brakes * Total lift approx. 180 mm * Lift and lowering mechanism operated via rotary slide valve Braking System * Dual-line pneumatic braking system (EU compliant) with EBS and RSS, automatic load-dependent control * Spring-loaded cylinders as parking brake * Anti-swapping coupling heads firmly mounted on the front cross member, no connection line to the tractor Tyres * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120 * Make of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN-bus system Mudguards * EU-compliant Spare Wheel Carrier * None Load Securing * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t * Approx. every 400–600 mm in the external frame, holes for attaching tension straps Front Wall * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior panelled with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z hardwood floor, recessed in the outer frame with galvanized omega steel profiles Lighting System * EU-compliant, 24 volts, with multi-chamber lights * LED side marker lights * LED position lights white at the front * LED outline marker lights at the rear * Number plate lights Iodjugqvfopfx Ah Notb * Lane marker lights LED * 1 x 15-pin and 2 x 7-pin connectors at the front cross member Equipment * 2 wheel chocks with holder * ECE 70 warning plates * Beacon mounting bracket incl. rotating beacon * 2 rubber buffers at the rear * Folding and extendable rear access ladder on the right (without platform) * 1 open perforated sheet box, crosswise to direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles Paintwork * Front wall: RAL colour of your choice * Chassis: hot-dip galvanized * Outer frame: hot-dip galvanized + RAL colour of your choice * Side underrun protection: aluminium, anodized; underrun guard: white (RAL 9016 traffic white) * Add-on parts: galvanized / black KTL coated * Rims: silver * Contour marking: complete yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets crosswise to the loading area * 20 stakes made of galvanized 80/50 tube, total length approx. 1,200 mm * Magazine for 20 plug-in stakes inside the front wall * Container locks for 1 x 40' and 2 x 20' containers, rear flush * Container lock for 1 x 20' container in the center * Working headlight at the lamp support (switched via reverse gear) * 2 stainless steel toolboxes, approx. 600 x 500 x 500 mm, one each on left and right

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately and soon available units, on our website. Equipment excerpt; full equipment details available on request. Chassis: * Welded construction made from high-quality steel profiles with through cross beams, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Fifth wheel plate approx. 8mm * Neck height at front approx. 130 mm Coupling device * 2-inch kingpin Rear underrun protection * Bolted version, in compliance with EC regulations Side underrun protection * According to EC regulations, made of anodised aluminium profiles Landing legs * 2 x 12 t landing legs with compensating foot and single-side operation, RHS in direction of travel Axles * 3 x 9 t air suspension axle assemblies, disc brakes 22.5” * Total stroke approx. 180 mm * Lifting and lowering device via rotary slide valve Braking system * Twin-line compressed air braking system to EC specifications, with EBS and RSS, automatic load-dependent control * Spring chamber cylinders as parking brake * Polarity-protected coupling heads permanently mounted on front cross member, without connecting line to towing vehicle Tyres * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN bus Itodpfew U H Sbjx Ah Neb Mudguards * According to EC regulations Spare wheel holder not included Load securing * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 2.0 t * Drill holes for attaching lashing straps every approx. 400–600 mm in the outer frame Front wall * Reinforced fixed steel structure, approx. 1,400 mm high * Inner face lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor let into the outer frame with galvanised omega steel profiles Lighting system * In compliance with EC, 24 volt, with multi-chamber lights * LED side marker lights * Front white LED position lights * Rear LED outline marker lights * Number plate lights * LED lane departure lights * 1x15- and 2x7-pin plug connections at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning boards * Bracket for rotating beacon, incl. rotating beacon * 2 rubber buffers at the rear * Foldable and extendable access ladder at rear right (without platform) * 1 open perforated sheet metal box, transverse to direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: RAL single colour as requested * Chassis: hot dip galvanised * Outer frame: hot dip galvanised + single RAL colour as requested * Centre stanchions: single RAL colour as requested * SSV: aluminium, anodised * Rear underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised / KTL black * Rims: silver Conspicuity markings * Complete set in yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets across the loading area * 20 stanchions made of galvanised tube 80/50, total length approx. 1,200 mm * Magazine for 20 removable stanchions inside the front wall * 5 x 25 side walls and rear wall made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Side wall and stanchi

Condition: used, Year of construction: 2015, Extendable superstructure: Yes Please contact Theo Lelie for more information Iedpexix Agsfx Ah Netb

Condition: used, Rotary indexing table, rotary indexing table with 16 stations Rotary indexing machine + TOX hydraulic press Special rotary indexing machine with multiple assembly stations Production and assembly line with rotary indexing system From special machinery manufacturer "AKE-technologies GmbH" Serial number: Order number: 11111 Year of manufacture: 2012 - large rotary indexing table WEISS type TC500, with 16 stations - pressing station with TOX power pack - vibratory feeder Itodsgd D U Eopfx Ah Neb - conveyor belts - testing stations - some stations still visible in the photos but already dismantled Required space L x W x H approx. 3500 x 2750 x 2300 mm Net weight approx. 3000 kg All in as-new condition – the system was never used in series production.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036721, clamping force: 6,500 kN, screw diameter: 70 mm, clearance between the columns: 1,110 mm, displacement volume: 1,078 cm³, injection pressure: 1,877 bar, injection weight: 981 g, opening stroke: 3,200 mm, plate height: 1,540 mm, drive type: Hydraulisch, clear span: 3,200 mm, tool weight: 2,200,000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX sliding shoe, forces are ideally absorbed and the service life of the moulds is extended. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24'' TFT color screen with multitouch functions CLAMPING UNIT - Clamping force: 6500 kN - Max. mould opening force: 455 kN - Daylight opening (h x v): 1110 x 960 mm - Platen size (h x v): 1540 x 1440 mm - Mould installation height min. - max.: 1550 mm (without centre platen) - Opening stroke: 3200 mm - Max. mould opening distance: 1650 mm - Max. mould weight: 22,000 kg INJECTION UNIT 1 SP2000 - Screw diameter / type: 60 mm / thermoplastics - Effective L/D ratio: 23.3 - Injection pressure: 2420 bar - Shot volume: 792 cm³ - Shot weight at max. stroke for PS: 720 g - Injection speed: 140 mm/s - Injection throughput: 396 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 72.2 g/s - Nozzle contact force: 82 kN INJECTION UNIT 2 SP2000 Iedpfxew U N Ixo Ah Netb - Screw diameter / type: 70 mm / thermoplastics - Effective L/D ratio: 20 - Injection pressure: 1877 bar - Shot volume: 1078 cm³ - Shot weight at max. stroke for PS: 981 g - Injection speed: 140 mm/s - Injection throughput: 539 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 98.3 g/s - Nozzle contact force: 82 kN ELECTRICAL PARAMETERS - Connected load: 341 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral conductor WEIGHT & DIMENSIONS - Net weight: 43.5 t - L x W x H: 11.89 x 3.22 x 2.77 m ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) - Mould heating: 96 zones (3.5 kW each) - Euromap interface for handling: E18 - Euromap central computer interfaces: E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical centre platen - Parallel clamping & opening during injection process with bar parallelism control between FWAP and centre platen or BWAP and centre platen - ColorForm interface signal interface for connecting an RPM unit - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036936, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 1,837 bar, injection weight: 123 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,820 mm, overall weight: 5,900 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 470 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (order 38670013) (machine no.: 61036936, new, year of manufacture 2023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT Itedpfx Ahjuggb Do Neb  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 35 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticizing flow (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heat output kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package  Swivel device Injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036683, clamping force: 1,600 kN, screw diameter: 50 mm, displacement volume: 393 cm³, injection pressure: 1.892 bar, injection weight: 358 g, mold height (min.): 200 mm, ejector force: 33,000 N, ejector stroke: 100 mm, opening stroke: 950 mm, installation height: 500 mm, total length: 5,650 mm, total width: 1,820 mm, total height: 1,950 mm, overall weight: 9,700 kg, heating capacity: 15.5 kW (21.07 HP), drive type: Vollelektrisch, clear span: 570 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 160 / 750 PA G01 (order 38670011) (machine no.: 61036683, new, year of manufacture 2013) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 1600  Mold opening force, max kN 120  Clear width (h x v) mm 570 x 520  Clamping platen (h x v) mm 770 x 720  Tool installation height min. - max. mm 200 - 500  Opening width mm 950  Mold opening stroke max. mm 450  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 33 / 33  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 1200 SPRING UNIT  Screw diameter / type mm 50 / standard  Effective Ls/D ratio 20.2  Injection pressure bar 1892  Stroke volume cm³ 393  Shot weight at max. stroke for PS g 358  Injection speed mm/s 200  Injection flow rate cm³/s 393  Screw drive/speed 1/min 267  Plasticizing flow (standard screw)4) g/s 36.5  Nozzle contact force kN 42 ELECTRICAL PARAMETERS  Connected load kW 31.2  Installed heat output kW 15.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 9.7  Length x width x height m 5.65 x 1.82 x 1.95 Itedpfx Asugfupoh Nob ADDITIONAL EQUIPMENT  Open nozzle  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Euromap interface handling E18  Automatic central lubrication  Adaptive Process Control (APC)  Injection compression molding circuit  Graphic analysis package  Swivel device Injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036940, clamping force: 1,600 kN, screw diameter: 50 mm, displacement volume: 393 cm³, injection pressure: 1.892 bar, injection weight: 358 g, mold height (min.): 200 mm, ejector force: 33,000 N, ejector stroke: 100 mm, opening stroke: 950 mm, installation height: 500 mm, total length: 5,650 mm, total width: 1,820 mm, total height: 1,950 mm, overall weight: 9,700 kg, heating capacity: 15.5 kW (21.07 HP), drive type: Vollelektrisch, clear span: 570 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 160 / 750 PA G01 (order 38670011) (machine no.: 61036683, new, year of manufacture 2013) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 1600  Mold opening force, max kN 120  Clear width (h x v) mm 570 x 520  Clamping platen (h x v) mm 770 x 720  Tool installation height min. - max. mm 200 - 500  Opening width mm 950  Mold opening stroke max. mm 450  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 33 / 33  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 1200 SPRING UNIT  Screw diameter / type mm 50 / standard  Effective Ls/D ratio 20.2  Injection pressure bar 1892  Stroke volume cm³ 393  Shot weight at max. stroke for PS g 358  Injection speed mm/s 200  Injection flow rate cm³/s 393  Screw drive/speed 1/min 267  Plasticizing flow (standard screw)4) g/s 36.5  Nozzle contact force kN 42 ELECTRICAL PARAMETERS  Connected load kW 31.2  Installed heat output kW 15.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 9.7  Length x width x height m 5.65 x 1.82 x 1.95 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface pneum. Cascade 4-fold  Euromap interface handling E18 + E67 Itedpfxjugfw Ds Ah Njb  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Electrical preparation for hydraulic auxiliary unit  Automatic central lubrication  Adaptive Process Control (APC)  Injection compression molding circuit  Graphic analysis package  Swivel device for injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 1,000,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 Iedpfxjud N Hdo Ah Netb SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC)  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036946, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (order 38670023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 40 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1860  Stroke volume cm³ 201  Shot weight at max. stroke for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticizing flow (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heat output kW 11.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS Itedpeud H Dmjfx Ah Njb  Net weight with switch cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: like new (used), Year of construction: 2019, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 2196028, Gerätetyp: Vollautomat Betriebsart: elektrisch Material: Edelstahl Produktkennzeichnungen: Hersteller-Art.-Nr: VA 4000/AT Itedpfx Ahev Acm Tj Njb Gewichtsinfo: Gewicht: 130 kg Geräteanschluss: Anschlusswert: 600 Watt Netzspannung: 400 Volt Schnittstärke maximal: 10 mm Messergröße: 330 mm Länge (Breite): 1270 mm Tiefe: 853 mm Höhe: 1330 mm

Condition: new, maximum load weight: 34,350 kg, overall weight: 42,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our entire vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment details available on request. Chassis: * Welded construction made of high-quality steel profiles with through cross members, designed for high floor or point loads, equipped with a heavy-duty outer frame * Loading platform at the rear as a welded steel construction, with two welded-in outer driving rails made of 5-hole steel plate (Lohr/Rolfo hole pattern system) approx. 2,250 mm in length, hydraulically lowerable by approx. 350 mm * Rear section includes a hydraulically extendable loading table (approx. 1,500 mm), constructed from welded steel with 5-hole steel plate (Lohr/Rolfo hole pattern system) cover, lighting brackets, and two ramp compartments and ramp supports * Drive and control of the rear operated via electric-hydraulic power unit housed in a stainless-steel box mounted on the left of the chassis, with radio remote control * Power supplied by the towing vehicle’s battery (NATO socket on the front wall, without connecting cable to the truck) Towing Device: * 2" king pin, replaceable from below Underrun Protection: * Fixed as per EU standard Landing Legs: * 2 x 12 t support winches with 2-speed gearbox Axles: * 3 x 9 t air suspension axle assemblies * Brand: SAF, disc brakes approx. 370 x 45 mm * ABS * 10-hole hub-centric wheels, offset ET120 * Total air suspension travel approx. 310 mm (lifting approx. 220 mm, lowering approx. 90 mm) * Air suspension controlled via hand lever with stop function Lift Axle: * 1st and 3rd axles automatically liftable, can also be actuated from the chassis frame or via PIN 12 of the lighting socket Tires: * 6 units, 445/45R19.5, fitted on 14.00X19.5 rims, 10-hole ET120 Mudguards: * As per EU regulations, 1/4 PVC mudguards * 1st axle front and rear, 2nd and 3rd axle rear Brake System: * Brand: Wabco * Dual-line brake system as per EU with EBS, automatically load-dependent control * Spring-operated parking brake acting on 2 axles * Interchange-proof coupling heads fixed to the front cross member, no connection to towing vehicle Lighting System: * As per EU regulations, 24V, * Multi-chamber rear lights, * License plate lights * LED side marker lights * LED front position light (white) and rear track lights * 15-pin socket and 2x7-pin sockets fixed at the front cross member, no cables to towing vehicle Load Securing: * 9 pairs of foldable lashing rings evenly distributed, approx. 8 t pulling force * 8 pairs of foldable lashing rings evenly distributed, approx. 2.5 t pulling force * 2 pairs of foldable lashing rings at the rear, approx. 2.5 t pulling force * External frame with holes approx. every 500 mm for tie-down straps Stake Pockets: * 16 plug-in stakes approx. 100/40 mm, usable length approx. 800 mm Stake Pockets: * 8 per side integrated into the outer frame * 4 rows of stake pockets transverse to the loading area Floor: * Approx. 28 mm Z-grade hardwood floor recessed into the outer frame Front Wall: * Solid front wall * Depot for 16 plug-in stakes approx. 100/40 * Front wall bolted to the top frame Itedpfx Aewt Iyleh Nob Equipment: * 2 wheel chocks with holders * 2x PVC toolboxes, approx. 600/400/500 mm * Holder for beacon light at rear incl. lamp * 2 LED reversing lights (rear) * 2 aluminum loading ramps, dimensions approx. 1,550 x 400 mm, load capacity approx. 4,000 kg/pair * Wheel load