Used Ge Ultrasound for sale (44)

Condition: new, maximum load weight: 16,180 kg, overall weight: 20,500 kg, axle configuration: 2 axles, loading space length: 6,550 mm, total width: 2,480 mm, Equipment: ABS, You can find our complete vehicle stock with immediately and short-term available vehicles on our website. Excerpt from the equipment. Complete specification available on request. Chassis: * Steel welded construction with welded longitudinal beams and penetrated Z-crossmembers; close crossmember spacing for high floor load capacity Ramp storage: * Two insertion pockets for one loading ramp each, located between the longitudinal beams behind the axle assembly below the loading platform, with locking plate in the rear headframe Underrun protection: * According to EU regulations Front landing legs: * Landing legs with single-side operation Rear supports: * Two adjustable drop supports Axles: * 2 x 10 t air suspension axle assemblies, SAF brand, drum brakes approx. 300 x 200 mm, center-mounted for twin tires, ABS, total air suspension travel approx. 200 mm (raise 140 mm, lower 60 mm), controlled via hand lever with detent function Tyres: * 8 units, 235/75 R17.5 – brand at our discretion * Mounted on 6.75x17.5 rims with offset Splash guards: * PVC splash guards in front of and behind axles as per EU regulations Load securing: * Lashing ring holes in the outer frame every approx. 150 mm for tie-down straps, pull strength approx. 2.5 t * 6 pairs of foldable lashing rings, evenly distributed, pull strength approx. 8 t * Stake pockets for 80/50 removable stakes: 3 pairs of stake pockets in the outer frame, evenly distributed Brake system: * Compressed air brake system according to EU regulations with EBS * Two coils for connection to truck, with red/yellow coupling heads * Spring-loaded parking brake acting on one axle Floor: * Approx. 28 mm Z-hardwood floor recessed in the outer frame Gjdpsy Rwycsfx Ankjub Lighting system: * Lighting system according to EU regulations, 24 Volt, multi-chamber rear lights, license plate lights, side marker lights, and lane guidance lights at the rear, connection plate left on drawbar, incl. connecting cable with 15-pin and 2 x 7-pin plugs Accessories: * 2 wheel chocks with bracket * Detachable beacon at the rear * Delivery includes 40 mm towing device (GVW max. 13,500 kg) Paintwork: * Chassis shot-blasted, cleaned, and hot-dip galvanized to the latest technical standards. Superstructure parts cleaned, primed, and hot-dip galvanized * Chassis: Hot-dip galvanized + RAL 3002 carmine red * Hubs: KTL black * Underrun protection: RAL 9010 pure white * Rims: RAL 9006 silver * Attachments: galvanized / KTL black Contour marking: * According to EU regulations, yellow on sides and rear (with ES-GE logo) Including special equipment: * Rear extension approx. 800 mm incl. underrun protection, extendable loading platform, load capacity approx. 2 t, locking every approx. 200 mm * Mechanically adjustable drawbar in length, 6 x approx. 100 mm, with bolted towing eye approx. 50 mm according to DIN 74053 * 4 rows of transverse stake pockets across the loading area, evenly distributed * 12 galvanized tubular removable stakes, approx. 80/50/4 mm, approx. 1,000 mm long * Container locks for 1x20’, extendable to approx. 2,820 mm, according to ISO 1496, EN 284 or EN 452 * 1 pair of aluminum ramps, load capacity per pair approx. 9,000 kg * 4 stainless steel toolboxes between or behind the axles

Condition: used, Year of construction: 2007, Extendable superstructure: Yes Please contact Theo Lelie for more information ES-GE 6.SOU-4H-1N 6 axle semi / stepframe lowloader 12-2007 Airsuspension Last 4 axles Hydraulic steert Extra remote steering (by wire) First 2 Axle’s are lift axles Its own 24V electro-hydraulic powerpack Loadingfloorlenght 11.000 mm + 6.000 mm extendible Width 2.550 mm + side extensions till 3.250 mm Weights in kg 6 x 10.000 kg axle load 25.000 kg fifth wheel load 84.000 kg total weight Ca 17.080 kg own weight Gsdpfsyrtm Hox Ankjub Ca 67.920 kg loading capacity ABS

Condition: used, axle configuration: > 3 axles, first registration: 04/2007, total length: 13,400 mm, total width: 2,550 mm, suspension: air, tire size: 205/65R17.5, wheelbase: 9,800 mm, color: white, Year of construction: 2007, Equipment: ABS, Saf axle. 2 x trailing steering axles. Extendable. Lifting roof. Sliding roof. Loading bed length: 910 cm. Floor height: 80 cm. Neck length: 390 cm. = Further information = Axle configuration: Tire size: 205/65R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Left inner tread: 30%; Left outer tread: 30%; Right inner tread: 30%; Right outer tread: 30% Rear axle 2: Twin tires; Left inner tread: 30%; Left outer tread: 30%; Right inner tread: 30%; Right outer tread: 30% Rear axle 3: Twin tires; Left inner tread: 30%; Left outer tread: 30%; Right inner tread: 30%; Right outer tread: 30% Rear axle 4: Twin tires; Left inner tread: 40%; Left outer tread: 40%; Right inner tread: 40%; Right outer tread: 40% Weights: Unladen weight: 9,940 kg Payload: 37,660 kg Gross vehicle weight (GVW): 47,600 kg Identification: Type number: 4STL48 / 4 AXLE / SLIDING ROOF / = Company information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-EN), Wouter Greutink (NL-DE-EN-ES-IT), Russian spoken. We do our best to provide correct information, but no rights can be derived from the information provided. Gsdpfx Anjy N Aw Rskjub

Condition: used, maximum load weight: 69,060 kg, overall weight: 84,000 kg, axle configuration: > 3 axles, first registration: 06/2013, next inspection (TÜV): 07/2026, total width: 2,540 mm, Equipment: ABS, You can find our entire stock of immediately and short-term available vehicles on our website. Excerpt from the equipment list. Complete specification available on request. - Chassis made of high-quality QSTE fine-grained steel, with central frame, non-telescopic Guodpfx Anoy Ikbhekjb - Lashing rings, lashing force approx. 100 kN per ring, foldable - 4 pairs of stake pockets in the area of the loading brackets, approx. 80 x 80 mm - Hydraulic supports (electro-hydraulic) - 6 x 11,000 kg (technical), SAF axles - Air suspension - 1st axle steered (leading axle), 2nd axle fixed - 3rd to 6th axles forced steering - Tridec steering system - Additional steering - NATO socket - 1st axle liftable - Tires 265/70R19.5 - 3.5 inch kingpin, exchangeable - Wabco ABS/EBS braking system - Steel front wall, approx. 400 mm high - 2 drop sides on the gooseneck - Single-color paint finish in RAL 3000 red

Year of construction: 2007, operating hours: 25,300 h, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 192-237, The LM 6000 gas turbine is a dual rotor aeroderivative turbine connected to a generator via a reduction gear. The nominal power output under ISA conditions is 45 MW. The gas turbine operated exclusively on natural gas. The turbine had run only 25,300 hours before it was sent for factory inspection and conversion at the GE facility. Turbine inspection and PD-PF conversion were completed in 2025. The gas turbine is equipped with the SPRINT system for higher power output at elevated ambient temperatures. Following the PF conversion, the turbine's emission values are compliant with GE standards. This set does not include the hydraulic starter, lube oil system, noise hood, air intake systems, or protection and control system! Gujdpfxoy Dq Duj Ankeb

Condition: used, machine/vehicle number: W09BLH3556EE32123, Year of construction: 2006, Please contact Theo Lelie for more information Gsdpfxey Dgkqo Ankeub

Condition: new, maximum load weight: 15,825 kg, overall weight: 20,500 kg, axle configuration: 2 axles, loading space length: 6,550 mm, loading space width: 2,550 mm, total width: 2,550 mm, Equipment: ABS, You will find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Partial list of equipment. Full equipment details available upon request. Chassis: * Steel welded construction with welded longitudinal beams and through Z cross-members, narrow cross-member spacing for high floor load capacity * Ramp storage between the longitudinal beams behind the axle assembly, under the loading floor, with two insertion pockets for one loading ramp each, locking plate in rear header Underrun Protection: * According to EU regulations Front Landing Legs: * Landing legs with single-sided operation Rear Support: * Two adjustable drop-down supports Axles: * 2 x 10 t air suspension axle assemblies by SAF, drum brakes approx. 300 x 200 mm, centrally mounted wheels for twin tires, ABS, total air suspension travel approx. 200 mm (lift approx. 140 mm, lowering approx. 60 mm), control via hand lever with latching function Tires: * 8 units, 235/75R 17.5 – make of our choice, on steel rims 6.75 x 17.5, mounted with offset Splashguards: * PVC, fitted in front of and behind the axles as per EU regulations Load Securing: * Around the outer frame, one hole every approx. 150 mm for lashing straps, lashing force approx. 2.5 t (lashing straps can be hooked in with the side walls closed, chamfered outer frame) * 6 pairs of folding lashing rings, evenly distributed, lashing force approx. 8 t * Stake pockets for 80/50 plug-in posts: 3 pairs of stake pockets on the outer frame, evenly distributed Brake System: * Pneumatic brake system in accordance with EU regulations with EBS * Two coiled lines for connection to the towing vehicle, red/yellow coupling heads * Spring-loaded parking brake acting on one axle Floor: * Approx. 28 mm thick Z-type hardwood floor recessed into the outer frame Front Wall: * Made from 25 mm side wall, removable Lighting System: * Lighting according to EU regulations, 24 volt, multi-chamber tail lights, license plate lights, side marker lights, and lane marker lights at the rear, connection plate on the left at drawbar including connection cable with 15-pin and 2 x 7-pin plugs Accessories: * 2 wheel chocks with holder * Removable beacon at the rear * Supplied with an additional 40 mm towing device (GVW max. 13,500 kg) Painting: * Chassis shot-blasted, cleaned and hot-dip galvanized to latest technical standards * Body parts cleaned, primed, and hot-dip galvanized Chassis: * Hot-dip galvanized + RAL 3002 carmine red * Side walls: RAL 3002 carmine red * Kinnegrip stakes: RAL 3002 carmine red * Hubs: KTL black * Underrun protection: RAL 9010 pure white * Rims: RAL 9006 silver * Attachments: galvanized / KTL black Conspicuity Marking: * According to EU, yellow on sides and rear Including Special Accessories: * Rear extension by approx. 800 mm incl. underrun protection, extendable loading platform, load capacity approx. 2 t, locking every approx. 200 mm * Mechanically adjustable drawbar adjustable in length, 6 x approx. 100 mm, bolted drawbar eye approx. 50 mm, according to DIN 74053 * 4 rows of crosswise stake pockets on the loading platform, evenly distributed * 12 galvanized plug-in stakes, approx. 80/50/4 mm, approx. 1,000 mm long Gusdpfx Aoy Auhbjnkob * Container locks for 1x20' container, extendable to approx. 2,820 mm, as per ISO 1496, EN 284, or EN 452 * 1 pair aluminum loading ramps, load capacity per pair approx. 9,000 kg * 4 stainless steel toolboxes between or behind the axles * 6 pieces of

Condition: new, maximum load weight: 32,155 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete stock of vehicles, including those available immediately and at short notice, on our website. Godpfoy Auhzex Ankjub Excerpt from the equipment list. Full specifications available on request. Chassis: * Welded construction made from high-quality steel profiles with thru-profile cross members. Designed for high point loads. Coupling device: * Fifth wheel plate with 2-inch kingpin Underrun protection: * According to EC regulations, bolted design Side guard: * According to EC regulations Landing legs: * 2 x 12 t landing legs with compensation foot and single-sided operation on the right in direction of travel Axles: * 3 x 9 t air suspension axle assembly, SAF brand, with disc brakes approx. 430 x 45 mm, wheel fixing mid-centered ET120, ABS, total air suspension lift approx. 180 mm, of which lift approx. 110 mm and lower approx. 70 mm * Air suspension operated via hand control valve with stop function Steering: * Last axle forcibly steered by linkage Axle lift: * First axle liftable, with fully automatic, load-dependent lift control Brake system: * Two-line compressed air brake system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, anti-mix couplings fixed to front cross member, without connecting line to motor vehicle * Wabco brand Tyres: * Sixfold, 385/65 R22.5 160J on rim 11.75 x 22.5 ET 120 - brand at our discretion. Incl. tire pressure monitoring system, tire pressure display in cab (pre-installed by chassis manufacturer) Mudguards: * According to EC regulations, 1/4 PVC mudguards in front of and behind axle assembly Load securing: * 9 pairs of folding lashing rings, evenly distributed (tensile force approx. 8.0 t) * 8 pairs of folding lashing rings, evenly distributed (tensile force approx. 2.5 t) * Drilled holes in outer frame every approx. 500 mm for lashing straps (straps can be hooked in with closed drop sides, beveled outer frame) Stake pockets: * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets across the loading platform * Plug-in stakes: 20 galvanised tubular stakes approx. 80/50 mm, total length approx. 1,000 mm * Magazine for 20 plug-in stakes on the inside of the front wall Front bulkhead: * Reinforced steel bulkhead, fixed, interior covered with approx. 9 mm phenolic plywood floor (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor, recessed into the outer frame Side walls: * 4 x 250 mm side walls and rear wall made of anodised aluminium hollow sections, foldable and removable, removable Kinnegrip stakes * Side wall and stake magazine under the chassis * Left and right insertion rails for side walls and stakes Lighting system: * According to EC regulations, 24 Volt with multi-chamber lights, LED side marker lights, LED position lights front white, LED outline marker lights at rear, license plate lights * 1x 15-pin and 2x 7-pin plug sockets on front cross member Equipment: * Two wheel chocks with holders * Warning signs according to ECE 70 * Work spotlight on lamp bracket (operated via reverse gear) * Holder for rotating beacon at rear, incl. beacon * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm Paintwork: * Chassis and front bulkhead sandblasted, primed and coated in a single colour * Chassis: hot-dip galvanised + RAL colour of choice * Front bulkhead: RAL colour of choice * Side walls: anodised aluminium * Top stakes front bulkhead: hot-dip galvanised * Hubs: KTL blac

Condition: new, maximum load weight: 16,180 kg, overall weight: 20,500 kg, axle configuration: 2 axles, total width: 2,480 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Below is an excerpt from the equipment. Full specification available upon request. Chassis: * Steel welded construction made of welded longitudinal beams and punched-through Z cross members; close cross member spacing for high floor load capacity * Ramp holder: Between the longitudinal beams, behind the axle assembly, under the loading floor, two slide-in pockets for loading ramps (one per pocket), with cover plate in the rear head frame Underrun protection: * In accordance with EU regulations Landing legs: * Front: landing legs with single-sided operation * Rear support: two adjustable drop legs Axles: * 2 x 10 t air suspension axle assemblies, brand SAF, approx. 300 x 200mm drum brakes, center-bored for twin tires, ABS, total air suspension lift approx. 200mm (of which raise approx. 140mm, lower approx. 60mm), manual lever control with detent function Tyres: * 8 units, 235/75 R17.5 - brand of our choice. Mounted on 6.75x17.5 rims with offset Splash guards: * PVC splash guards in front of and behind the axles as per EU regulations Load securing: * On the outer frame, boreholes for lashing straps at approx. every 150 mm, lashing capacity approx. 2.5 t * 6 pairs of folding lashing rings evenly distributed, lashing capacity approx. 8 t * Stake pockets for 80/50 insert stakes: 3 pairs on the outer frame, evenly distributed Brake system: * Compressed air brake system according to EU regulations with EBS * Two coils as coupling to the truck, red/yellow coupling heads * Spring-loaded parking brake acting on one axle Floor: * Approx. 28 mm Z hardwood floor recessed into the outer frame Lighting system: * Lighting system according to EU standards, 24 Volt, multi-chamber rear lights, license plate lights, side marker and lane departure lights at the rear, connection plate left at the drawbar, including connecting cable with 15-pin and 2 x 7-pin connectors Accessories: * 2 wheel chocks with holders * Detachable flashing beacon at the rear * 40 mm towing device supplied (GVW max. 13,500 kg) * Rear extension approx. 800 mm including underrun protection, extendable loading platform, load capacity approx. 2 t, locking every approx. 200 mm * Mechanically adjustable rigid drawbar in length, 6 x approx. 100 mm increments, with bolted 50 mm towing eye per DIN 74053 * 4 rows of stake pockets across the loading area, evenly distributed * 12 galvanized pipe insert stakes, approx. 80/50/4 mm, approx. 1,000 mm long * Container locks for 1 x 20' container * Container locks 1 x 20' extendable to approx. 2,820 mm, compliant with ISO 1496, EN 284 or EN 452 * 1 pair of aluminum loading ramps, load capacity per pair approx. 9,000 kg * 4 stainless steel toolboxes between or behind the axles Paintwork: * Chassis shot-blasted, cleaned, and high-quality hot-dip galvanized to the latest technological standard * Body components cleaned, primed, and hot-dip galvanized * Chassis: hot-dip galvanized + RAL 9011 graphite black * Outer frame: hot-dip galvanized + RAL 9010 pure white * Hubs: KTL black * Underrun protection: RAL 9010 pure white * Rims: RAL 9006 silver * Fittings: galvanized / KTL black Guodpfey Auf Tjx Ankeb

Condition: new, maximum load weight: 39,070 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Partial list of features. Full equipment details available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile cross-members, designed for high point loads * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide Coupling device: * 2-inch kingpin (also prepared for 3.5-inch) Underrun protection: * According to EC regulations, bolted design Side underrun protection: * According to EC regulations Landing gear: * 24 t landing legs with single-sided operation (approx. 66 t test load), Jost Modul CH (Heavy Duty) S-foot Axles: * 3 x 9 t air suspension axle units, brand SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted with 10-lug ET 120, total air suspension stroke approx. 200 mm (approx. 140 mm lift, approx. 60 mm lower), control via rotary slide valve with detent, with RTR function * Switch for second ride height (+ approx. 50 mm) on the holder of the lift/lowering device * Smartboard/TIM/Infocenter, without TPMS display Lift axle: * First axle liftable, with fully automatic load-dependent lift control, start aid via button in driver's cab (15-pin socket PIN12). Button in cab not included in delivery Brake system: * Two-line compressed air braking system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, non-interchangeable coupling heads permanently mounted on the front cross beam, without connecting line to the tractor, brand Wabco Tyres: Guodpfx Asyz E T Sonkob * 6 units, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand at our discretion), ET 120 * Basic tyre pressure monitoring, connected to the CAN-bus system of the EBS * Tyre pressure monitoring display in driver's cab (prepared by the tractor manufacturer) Mudguards: * According to EC regulations, PVC mudguards (half-shells) over all axles * Anti-spray mud flaps Load securing: * 8 pairs of hook plates welded into the outer frame (traction approx. 3 t) * 6 pairs of lashing rings on the side of the outer frame, evenly distributed (traction approx. 10 t) Stake pockets/stakes: * 5 pairs of stake pockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 plug-in stakes made of galvanized square tubing, approx. 80 x 80 x 4 mm, with bottom stop Front wall: * Bolted front wall, approx. 1,200 mm high, metal plated Stake magazine: * Magazine for plug-in stakes inside the front wall Floor: * Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting system: * According to EC regulations, 24V with multi-chamber lights, LED side marker lights, LED position lights (white, front), LED outline marker lights (rear), license plate lights * 1x 15-pin and 2x 7-pin connectors on the front cross beam Equipment: * Warning sign according to ECE 70 * 2 LED work lights mounted on the lamp bracket (switched via reverse gear) * Bracket for rotating beacon at the rear (incl. beacon) * 1 foldable, extendable access ladder at the rear (without platform) * 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of the front wall * Smart-Board with axle load display * 2 LED work lights above the front wall, switchable via chassis frame switch * 2 LED work lights at the height of the supports (switched via reverse ge

Condition: like new (used), functionality: fully functional, machine/vehicle number: A06B-0854-B190, Servo motor Brand: GE Fanuc Model: 6 Motor specification: A06B-0854-B190 Features: Power: 7.5 kW Frequency: 50/60 Hz Current: 44 A Potential energy: 135-222V-AC Revolutions: 1500-8000 RPM Guodpfor Nbkpex Ankjb

Condition: used, This listing is for the GE Healthcare BPG 200/270 Axichrom Column The unit is in full working condition and is ready for immediate use Gedpfeyrrvgjx Anksub The GE Healthcare Axichrom BPG 200/270 is a high-performance chromatography column designed for preparative and process-scale purification. It is widely used in biopharmaceutical manufacturing, protein separation, and research applications. The column ensures stable packing, efficient flow distribution, and consistent separation performance for laboratory and industrial workflows

Condition: used, This listing is for the GE Healthcare BPG300/750 Axichrom Column The unit is in full working condition and is ready for immediate use Gsdpfeyrru Njx Ankoub The GE Healthcare Axichrom BPG 300/750 is a high-performance chromatography column designed for preparative and process-scale purification. It is widely used in biopharmaceutical manufacturing, protein separation, and research applications. The column ensures stable packing, efficient flow distribution, and consistent separation performance for laboratory and industrial workflows

Condition: used, This listing is for the GE Healthcare BPG 200/950 Axichrom Column The unit is in full working condition and is ready for immediate use Gsdpfx Aeyrrpgsnkoub The GE Healthcare Axichrom BPG 200/950 is a high-performance chromatography column designed for preparative and process-scale purification. It is widely used in biopharmaceutical manufacturing, protein separation, and research applications. The column ensures stable packing, efficient flow distribution, and consistent separation performance for laboratory and industrial workflows

Condition: used, Year of construction: 2006, operating hours: 85,064 h, functionality: fully functional, machine/vehicle number: J320GSC105, Total running hours: 85,064 No overhaul Genset was purchased brand new from Jenbacher ISO Standard Power: 1,095 kW (kilowatts). Engine Speed: 1,500 min⁻¹ (RPM). Standard Reference: ISO 3046 Total Weight: Approximately 5,200 kg. (Radiator excluded) Guedpfxeymzn Uj Ankjb The package includes the complete engine (with a fully functional turbocharger), alternator, and electrical panels (DianXT). The container/enclosure can also be included if required (based on the offered price). Price including Container 53,000 €

Condition: used, functionality: fully functional, Year of construction: 2018, total length: 2,400 mm, total height: 2,945 mm, total width: 1,300 mm, type of input current: AC, overall weight: 2,900 kg, input voltage: 400 V, laser power: 3,000 W, One of the best model of the 3D metal printer model on the market. High tech, very accurate and fast, can print stainless and titanium. Made for aerospace manufacturing, but capable for other industries as well. Machine type: 3D printer Manufacturer: GE Additive Model: Arcam EBM Q20plus Year of construction: 2018 Condition: used Functionality: Fully functional Price 59000.- eur, loaded on truck. Best price you ever can buy such level printer. Packed into manufacturer boxes, ready to ship. Data from manufacturer: Max. build size 350 x 380 mm (Ø x H) Max. beam power 3kW Cathode type Single crystalline Min. beam diameter 140 μm Max. EB translation speed 8,000 m/s Active cooling Water-cooled heat sink Minimum chamber pressure 5 x 10-4 mbar Typical build atmosphere 4 x 10-3 mbar (partial pressure of He) He consumption, build process 4 l/h He consumption, ventilation 100-150 l/build Power supply 3 x 400 V, 32 A, 7 kW Size approx. 2,400 x 1,300 x 2,945 mm (W x D x H) Weight 2,900 kg CAD interface Standard: STL Materials: Arcam EBM Ti6Al4V Grade 5, P-Mtrl Gsdpfjvmpq Tjx Ankeub Arcam EBM Ti6Al4V Grade 23, P-Mtrl

Condition: new, maximum load weight: 63,960 kg, overall weight: 76,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You will find our complete range of vehicles, including immediately and short-term available units, on our website. Excerpt from the equipment features. Full equipment details available on request. Chassis: * Welded construction made from high-quality steel sections with punched cross-members, designed for high point loads * Outer frame made of UNP steel Coupling device: * 2-inch kingpin Underrun protection: * In accordance with EC regulations, bolted version Side guard: * In accordance with EC regulations Landing gear: * Landing legs with single-sided operation, static load approx. 66 t / lifting capacity approx. 24 t Axles: * 5 x 10 t air-suspended axle assemblies, SAF brand, with drum brakes approx. 400 x 200 mm * ABS * Wheel connection: centre-guided 10-hole with ET 0 * Total air suspension travel approx. 200 mm (raising approx. 140 mm, lowering approx. 60 mm), controlled via rotary slide valve with detent function Steering: * 1st axle as self-steering, 2nd axle fixed, 3rd, 4th, and 5th axles forced steered via linkage * Centralized grease points positioned externally Axle lift: * First and second axles automatically liftable, with additional manual override at the chassis Brake system: * Two-line compressed air brake system in accordance with EC regulations, with EBS and RSS, automatic load-dependent control, Wabco 4S/3M system * Spring brake cylinders as parking brake, tamper-proof coupling heads permanently mounted on the front cross member, without connection line to the tractor unit * Aluminum air reservoirs Tyres: * 10 x 445/65 R22.5 164J on 11.75x22.5 ET 0 rims – brand of our choice TPMS: * Tyre pressure monitoring system (TPMS) in accordance with ECE R141, with data transmission to tractor unit Mudguards: * In accordance with EC regulations, 1st axle front, 2nd axle rear, 3rd–5th axles each with 1/4 PVC mudguard front and rear * Rear mudguards with spray suppression flaps Load securing: * 5 pairs of folding lashing rings, evenly distributed (lashing capacity approx. 14 t) * 11 pairs of hook plates welded into the outer frame (lashing capacity approx. 3 t) * 10 pairs of lashing rings in the side outer frame, evenly distributed (lashing capacity approx. 8 t) Stanchion pockets: * 10 pairs of stanchion pockets recessed into the outer frame * 6 pairs of stanchion pockets flush-mounted in the floor (outer longitudinal beam) Removable stanchions: * 16 galvanized plug-in stanchions, approx. 80 x 80 x 8 mm, usable length approx. 850 mm Stanchion magazine: * Each side, in front of the front wall, a magazine for 8 plug-in stanchions approx. 80/80 mm Gujdpfxowx Dcae Ankeb Front wall: * Bolted corner stanchions filled with aluminum box sections, interior with full-width and full-height steel collision protection plate Floor: * Approx. 28 mm Z-hardwood floor, recessed in the outer frame, flush finished Lighting system: * In accordance with EC regulations, 24 Volt with multi-chamber rear lamps * LED side marker lights * LED position lights, white, front * LED marker lights, rear * Number plate lights, 1x 15-pin and 2x 7-pin connectors at front cross member Equipment: * Two chocks with holders * Warning board according to ECE 70 * Work light at the lamp bracket (activated via reverse gear) * Holder for rotating beacon at the rear (includes beacon) * Each side left and right: 1 permanently mounted access ladder, including plug-in step * Smart Board * 'Vehicle swings out' sticker, load centre marking sticker Paintwork: * Chassis and front wal

Condition: new, maximum load weight: 56,570 kg, overall weight: 66,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle stock, with vehicles available for immediate and short-term delivery, on our website. Extract from the equipment list. Full specification available on request. Chassis: * Chassis frame construction with welded longitudinal beams and through-running cross members * Rear underrun bar approximately 700 mm wide * Fifth wheel plate at least 8 mm thick, fitted between the longitudinal beams * Maximum cross member spacing 400 mm (for longitudinal floor installation) * 3.5-inch kingpin according to SAE standard, replaceable * Outer frame as UNP 200, open to the outside Landing Gears: * 24 t JOST - MODUL CH (Heavy Duty) telescopic landing gear with S-foot Axles: * 4 x 10 t SAF axles with large drum brakes * 22.5 single tires * Axle spacing approx. 1,700/1,810/1,810 mm * Air suspension unit with 10 t load capacity each, lift and lower device with 1 rotary valve Knorr/Wabco * Holder for lift and lower device, bolted design Braking system: * Smartboard/TIM/Infocenter at the lift/lower holder, additionally to the lift/lower valve, without battery (operable only with towing unit) * Mount for light and brake at the front underrun bar, total height approx. 700 mm * Basic version tire pressure monitoring, connected to CAN bus system of the EBS * With double-release valve for brake and spring brake actuator * Test port for brake cylinder pressure on the front right brake cylinder * 1 red and 1 yellow coupling head each * Lift and lower device mounted at rear left in driving direction * EBS braking system by Wabco, EBS diagnostic via CAN bus (EBS plug), no external diagnostic cable! Tyres: * 8 x 445/65 R 22.5 – premium brand of our choice * Centering rings Lubrication: * Grease nipple strips at the bogies and front steering, no central lubrication Guodpfewx Dctsx Anksb Superstructure: * Without body certificate according to DIN EN 12642 XL * 2x LED work lights on top of front wall (facing rear), switch at lift/lower holder * Front wall for platform design, heavy duty * Side outline marking yellow, rear yellow * Front wall approx. 800 mm high, with metal cladding, bolted Lighting: * 2x LED work lights fitted in lamp panel, controlled by reverse gear * 2x LED work lights, controlled by reverse gear, one each side near the landing gear * 2x LED reversing lights, one each side in front of first axle * Lighting/wiring system, brand of our choice * Number plate illumination * The towing vehicle must supply sufficient power for the selected lighting (especially reverse light) * Position lights front, bottom, white, one each side (LED) * 24 volt lighting system with large multifunction light * Flashing side marker lights (LED) * 1x 15-pin and 2x 7-pin connections at the front via multifunction box * EBS socket * 1 pair of lane marker lights (LED) Floor: * Hardwood floor approx. 28 mm thick, alternately with galvanized omega steel profiles Paint/Coating (no metallic finishes): * Chassis painted in RAL color of your choice, front wall (steel construction) in RAL color of choice * Axle hubs in chassis color * Axles and landing gear black * Wheels in aluminum/silver similar to RAL 9006 * Wheel nuts untreated * Underrun protection painted RAL 9010 pure white (aluminum) Accessories: * Lifting device for 1st axle * 9 lashing plates welded into the outer frame per side, lashing capacity max. 3,000 daN * 12 RUD-SLP lashing points per side with

Condition: used, This listing is for the GE Healthcare (now Cytiva) GE Axicrom 140/500 The unit is in full working condition and is ready for immediate use AxiChrom is a family of large-scale, low-pressure chromatography columns made by GE Healthcare The “140/500” refers to a column with inner diameter (ID) 140 mm and bed height up to 500 mm (the “long-tube” version Gsdoxhdw Tepfx Ankjub Typical Uses Process development, scale‑up trials, and small/full scale production of biomolecules (e.g. proteins, antibodies) in biopharma or biotech. As part of purification workflows where large volumes and high throughput are needed, but still under low pressure (i.e. not high‑pressure liquid chromatography)

Condition: used, This listing is for a GE Healthcare Ettan IPGphor 3 Isoelectric Focusing System. The unit is in full working condition and is ready for immediate release. The GE Healthcare Ettan IPGphor 3 is a cutting-edge isoelectric focusing system designed for speed, reliability, and enhanced performance in the first dimension of 2-D electrophoresis. Ideal for researchers looking to streamline their protein analysis workflows, this system offers robust features that cater to diverse applications. Key Features: Godsxxx Uuopfx Ankjub Simultaneous Strip Processing: - Capable of running up to 12 IPG strips at once, accommodating various strip lengths of 7, 11, 13, 18, or 24 cm, providing flexibility for different experimental needs. Enhanced Sample Handling: - Utilizes sample cups with the Ettan IPGphor manifold or manifold light, enabling increased protein loading and improved separation efficiency. Advanced Control Software: - The Ettan IPGphor 3 Control Software allows management of up to four individual units simultaneously, each with customizable run parameters for optimized performance. Safety Mechanisms: - Features an automatic voltage cutoff that activates when the safety lid is opened, ensuring operator safety during experiments. Compatibility: - Fully compatible with earlier Ettan IPGphor IEF units, making it an excellent upgrade for labs using older systems. It’s particularly suited for 2-D DIGE applications.

Condition: used, This listing is for a GE Healthcare GeneQuant 1300 Spectrophotometer. The unit is in full working condition and is ready for immediate release. Unlock the full potential of your laboratory with the GE Healthcare GeneQuant 1300 Spectrophotometer, a cutting-edge UV/Visible instrument specifically designed for accurate measurement of nucleic acid and protein concentrations, as well as bacterial cell culture density. This versatile device is essential for researchers seeking reliable and precise analytical performance. Gjdpoxx Ahxjfx Ankeub Key Features: Wide Wavelength Range: Operates between 190-1100 nm, allowing for extensive applications in life sciences, including nucleic acid purification and protein assays. User-Friendly Interface: With the convenience of one-touch calibration curves, kinetics, or ratio measurements, the GeneQuant 1300 simplifies complex analyses. Customizable Analytical Performance: Save up to 90 custom methods in a dedicated folder with optional password protection, ensuring secure and efficient data management. Visual Inspection Capabilities: Quickly detect impurities in nucleic acid scans, particularly beneficial for RNA samples. Technical Specifications: Wavelength Calibration: Automatic upon switch-on for hassle-free operation. Spectral Bandwidth: 5 nm for precise measurements. Wavelength Accuracy: ± 2 nm and Wavelength Reproducibility: ± 0.5 nm for reliable results. Light Source: Long-life stabilized Xenon lamp for consistent performance. Dimensions: 260 × 390 × 100 mm with a weight of 4.5 kg, making it compact and easy to integrate into any lab setup. Power Requirements: Compatible with 100–240 VAC ± 10%, 50/60 Hz. Benefits: Convenient Data Output: Results can be printed via an optional integrated printer or sent to a PC using USB or wireless Bluetooth accessories, enhancing data accessibility. Robust Design: The press-to-read feature reduces lamp-on time, while optics with no moving parts minimize the risk of optical misalignment. The GE Healthcare GeneQuant 1300 Spectrophotometer is the ideal tool for life science applications, providing researchers with the reliability and precision necessary for successful experiments. Elevate your laboratory's capabilities and ensure accurate results with this exceptional spectrophotometer!

Year of construction: 2018, condition: used, This listing is for a GE Healthcare UniFlux 120 Tangential Flow Filtration (TFF) System. The unit is in full working condition and ready for immediate release. The GE Healthcare UniFlux 120 is a fully automated Tangential Flow Filtration (TFF) system designed for clarification, concentration, and diafiltration applications in pilot to manufacturing-scale operations. With a flow rate range of 12 to 120 liters per minute, the UniFlux 120 is ideal for bioprocessing applications such as monoclonal antibody purification, vaccine production, and protein concentration. Key Features & Benefits - Fully Automated Operation – The system is controlled by UNICORN software, ensuring seamless data logging, process automation, and compliance with regulatory standards - Versatile Filtration Options – Supports cassette or hollow fiber membranes. Conversion between formats is possible, with initial cassette holder installation requiring Cytiva Service. - High-Performance Filtration – Features a rotary lobe pump for precise flow control and optimized filtration efficiency. - Sanitary & GMP-Compliant Design – Constructed from stainless steel, making it suitable for pharmaceutical and biotechnology environments. Gsdpfx Ajxxx Inonkoub - Scalability & Reliability – Designed to support process development and scale-up to commercial production, ensuring consistent filtration performance. Applications - Biopharmaceutical processing - Monoclonal antibody purification - Vaccine production - Protein concentration & buffer exchange - Cell culture clarification Technical Specifications - Flow Rate: 12 – 120 L/min - Pump Type: Rotary lobe pump - Filtration Format: Cassette & hollow fiber (conversion possible) - Control System: UNICORN software (FDA 21 CFR Part 11 compliant)

Condition: used, This listing is for a GE Axichrom Master 300-1000 Control Tower + GE AxiChrom 300/300 mm Chromatography Column. The unit is in full working condition and is ready for immediate release. The GE AxiChrom Master 300-1000 Control Tower and GE AxiChrom 300/300 mm Chromatography Column offer an advanced, scalable solution for automated column packing in biopharmaceutical purification and process development. Designed for seamless integration and ease of operation, this system enhances workflow efficiency, optimizes chromatography resin performance, and supports GMP compliance for manufacturing applications. Key Features: GE AxiChrom 300-1000 Master Control Tower: Automated Column Control: Preprogrammed methods for packing, unpacking, priming, and maintenance to improve uptime. Touch Screen Interface: Easy-to-use operator interface for precise control. Integration with UNICORN & Automation Systems: Supports Profibus integration with UNICORN or DeltaV Distributed Control System for batch record tracking and regulatory compliance. Multi-Column Management: A single AxiChrom Master unit can control up to ten chromatography columns. Intelligent Packing Wizard: Guides automated priming, packing, and unpacking of chromatography columns. GE AxiChrom 300/300 mm Chromatography Column: Godpfsxxycaex Ankjub Automated Column Packing: Ensures verified packing methods for efficient resin performance. Scalable Design: Adaptable from process development to full-scale production. Optimized for Modern Chromatography Resins: Supports cutting-edge purification techniques. Easy Sanitization: Designed for GMP environments, ensuring safe and sterile operation. Closed-System Connectivity: Can integrate with slurry tanks and chromatography systems for improved process control. Specifications: Column Model: GE AxiChrom 300/300 mm Column Diameter: 300 mm Column Height: 300 mm Voltage: 415V Hertz: 50Hz/60Hz Control Tower Model: GE AxiChrom Master 300-1000 Width: 670 mm Depth: 630 mm Height: 1090 mm Foot Print: 630 x 670 mm Weight: 90 kg EMC: IEC/EN 61326-1, Emission according to CISPR 11, Group 1, class A, CFR 47 FCC Part 15B, class A Voltage: 380 - 480 V Frequency: 50/60 Hz Air Supply: 5.5 - 7 bar g. Clean dry air Benefits: Automated & Efficient: Reduces manual intervention, improving process consistency and productivity. Scalable & Flexible: Ideal for process development and full-scale biomanufacturing. Regulatory Compliance: Designed for GMP environments with complete regulatory documentation. Seamless Integration: Connects to UNICORN software, DeltaV, and other automation systems. Multi-Column Control: One AxiChrom Master can manage up to 10 chromatography columns. Applications: This system is ideal for biopharmaceutical purification, including: Monoclonal Antibody (mAb) Production Vaccine & Biologic Drug Manufacturing Recombinant Protein Purification Gene Therapy & Cell Therapy Processing With its combination of automated control, intelligent packing, and scalable chromatography, the GE AxiChrom Master 300-1000 Control Tower + GE AxiChrom 300/300 mm Chromatography Column is a powerful asset for biopharmaceutical manufacturing and large-scale purification applications.

Condition: used, This listing is for 1 of 2 GE Healthcare ÄKTAprocess Liquid Chromatography System. The unit is in full working condition and is ready for immediate release. The GE Healthcare ÄKTAprocess is a fully automated liquid chromatography system designed for process scale-up and large-scale biopharmaceutical manufacturing. With extensive configuration possibilities, it seamlessly transitions processes from small-scale ÄKTAexplorer and ÄKTApilot systems to industrial production. Featuring UNICORN control software, regulatory compliance, and high-performance liquid handling, the ÄKTAprocess is an essential tool for biopharmaceutical production. Key Features: Advanced Automation & Control: Automated Liquid Chromatography System: Ensures precise and reproducible separations. UNICORN Control Software: Provides intuitive process control and monitoring. Godpfxsxxycgo Ankoub Post-Purchase Configuration Options: Enhances usability and extends system lifespan. Scalability & Flexibility: Designed for Large-Scale Biomanufacturing: Supports seamless scale-up from lab to production. Customizable Configuration: Thousands of setup possibilities for different applications. Three Flow Rate Ranges: Handles up to 1,800 L/h, enabling high-volume production. Quality & Compliance: Built with USP Class VI Materials: Traceable, regulatory-compliant construction. Intelligent AxiChrom Column Packing: Ensures optimal separation performance. Full Regulatory Documentation & Services: Supports cGMP compliance. Compact & User-Friendly Design: Integrated Computer: Reduces footprint and minimizes plant clutter. Robust & Reliable Construction: Engineered for long-term operation in industrial settings. Specifications: Weight 450 kg (990 lbs) Dimensions (cm) 41L × 33W × 64H Dimensions (in) 16L × 13W × 25H Benefits: Optimized for Bioprocess Scale-Up: Seamlessly transition from small-scale systems. Regulatory Compliance: Supports cGMP requirements with complete documentation. Highly Configurable: Adaptable to diverse biomanufacturing needs. Space-Efficient Design: Built-in computer minimizes workspace requirements. Applications: The ÄKTAprocess is ideal for biopharmaceutical production, including: Monoclonal Antibody Purification Vaccine Production Recombinant Protein Purification Gene Therapy & Cell Therapy Processing

Condition: used, This listing is for the Cytiva AxiChrom 300/300 Chromotography collumn The unit is in full working condition and is ready for immediate use AxiChrom is a line of low-pressure, axial compression chromatography columns designed for process development and manufacturing of biopharmaceuticals. They are built for GMP‐compatible use, scalable from lab/ pilot to full production Godjxhdwyspfx Ankeub 300 mm inner diameter (i.d.) 300 mm bed height (column length) or related bed volume configuration Features Axial compression packing (intelligent packing): preprogrammed / automated methods for packing, ensuring reproducible bed density / performance. “Swing‑out” tube or movable adapters: for large diameters (≥ 300 mm), the column tube swings out to allow easier access to the bed supports, seals and O‑rings. Sanitization / Cleaning / GMP compliance: Parts (“wetted” and “pressure retaining”) are traceable by batch, and materials comply with USP Class VI, 21 CFR part 177, EMEA regulatory requirements. Cleaning and sanitization are feasible, including treatment with 1 M NaOH, with effectiveness for microbial and endotoxin removal. Flexible configurations: options for different bed heights (usually ~10‑50 cm for large diameters) and different bed support types