Used Geberit Esg for sale (63)

Condition: used, Electrofusion Welding Machine, Electrofitting Welder, Welding Unit, Used Machine Manufacturer: Geberit Model: ESG 40/200 Overall Dimensions: Width: 220 mm Depth: 170 mm Iijdpfx Ajznk Nvopceg Height: 170 mm

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations Iodpjz Agv Uofx Apcjig - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. Iisdsz Agw Eepfx Apcsg - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets Ijdoz Ag Rrepfx Apcjig - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Iiedpfx Aezz Rpcopcjg Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: good (used), operating hours: 20,080 h, functionality: fully functional, machine/vehicle number: Kf262 622 E35, overall weight: 720 kg, load capacity: 12 kg, arm reach: 2,665 mm, pivoting range: 300 °, Equipment: documentation/manual, Complete automated glazing and handling solution For sale is an automated robot glazing cell with a Kawasaki 6-axis glazing robot, a Yaskawa handling robot, a CeramDetect 3.0 workpiece recognition system, a base cleaning machine, and a feeding and transport system. System overview: - Complete automated robot glazing cell for ceramic sanitaryware - Automated material flow from the feed conveyor, via workpiece recognition and carousel, to the glazing, base processing, and transfer to the transport system - Designed for different sanitaryware models - Sold as a complete process solution with robotics, recognition, and handling Glazing robot: - Manufacturer: Kawasaki Robotics. Type: KF262, 6-axis industrial robot, used for automated glazing/coating of sanitaryware Handling/transfer robot: - Manufacturer: Yaskawa Europe GmbH - Series: Motoman ES165D - Robot type: YR-ES0165D-B00 - Controller: Yaskawa DX100 - Date according to nameplate: 03.10.2013 - Power supply: 3-phase, 400 / 415 / 440 V, 50 / 60 Hz - Average power: 5.0 kVA - Full load current: 14.4 A - CE marking present - Function: automated transfer between carousel, base cleaning station, and transport system Workpiece recognition – CeramDetect 3.0: - CeramDetect 3.0 for automatic workpiece and position recognition - CeramDetect laser module and camera - Recognition in the area of the transfer from the feed conveyor to the carousel - The existing CeramDetect software is offered together with the system Base cleaning machine: - Automated base cleaning machine as part of the robot cell - Transfer and removal are carried out by the Yaskawa handling robot Other system components: - Feed conveyor for workpiece feeding - Automated transfer device from the feed conveyor to the carousel Iedezz Ra Uepfx Apcsig - Carousel for positioning and transferring the workpieces - Transport system for receiving the finished workpieces - Protective and safety devices - Control and electrical components of the entire system Material flow: 1. Feeding of the sanitaryware via a feed conveyor 2. Removal of the workpieces from the feed conveyor via an automatic transfer device 3. Transfer of the workpieces to the carousel 4. Workpiece recognition takes place at the transfer position using CeramDetect 5. Type and position of the workpiece are recorded for the automated glazing process 6. Transport of the workpiece on the carousel to the glazing position 7. Automatic glazing by the Kawasaki 6-axis glazing robot 8. Transfer of the workpieces by the Yaskawa handling robot to the base cleaning station 9. Transfer to the base cleaning station and subsequent removal 10. Placing the workpieces on a transport system Special advantages: - Automatic workpiece recognition and position determination - Flexible processing of different sanitaryware models - Combination of glazing robotics, automated handling, and base cleaning - Complete process cell instead of individual robot components Scope of supply and notes: - The sale includes the existing components of the described robot glazing cell - Technical documentation, circuit diagrams, robot programs, and existing software versions will be provided with the system, subject to availability - Dismantling, loading, and transport need to be coordinated Further technical details can be provided.

Year of construction: 2008, condition: ready for operation (used), Main Drive Number of axis 3 Iisdpox D H Erefx Apcog This 3-axis EASTAR ESG-1640ASD II surface grinding machine was manufactured in 2008. It features a substantial work plane of 400 x 1000 mm, ideal for various grinding tasks. If you are looking to get high-quality grinding capabilities, consider the EASTAR ESG-1640ASD II machine we have for sale. Contact us for more information. Application Types Grinding

Year of construction: 2020, condition: used, functionality: fully functional, Flow rack with picking aid Rack information: - 131 product compartments + 4 return compartments: - 5 units from left to right (1st unit: 26 compartments / 1 return. 2nd unit: 28 compartments. 3rd unit: 26 compartments / 1 return. 4th unit: 26 compartments / 1 return. 5th unit: 25 compartments / 1 return (originally 26 compartments / 1 return)) - 5th unit - 25 compartments, accessible with Strödter lifting aid - The supermarket can also be modularly assembled in other widths and with different compartment layouts. - At the beginning of 2025, 4 compartments were converted to reinforced rollers and an extended insertion area. - Manufacturer: AQS Logistic Systems GmbH; Siemensstraße 5; 57290 Neunkirchen Iiodpfxszz Ruxo Apceg - Year of manufacture: 2020 - Dimensions: Depth: 12m / Width: 5 units, each 7.5m --> Total width: 38m - Shelves: Dimensions: 800x400x20 L/W/H, 294 pieces, new and original packaging available. - Spare parts available - Attention! Rollers are partially defective. Lifting aid information: - The picking aid from Strödter Handling Technology GmbH was manufactured in 2023. Its gripper can be pivoted from top to bottom (90°C) and was designed for removing toilet bowls from the rack. The toilet bowls were removed from the flow rack using the lifting aid, tilted by 90°, and placed on a tray on a pallet. - Thanks to a new gripper, the lifting aid can also be used for any products. The maximum load capacity is 45 kg. Additional information: The flow rack and the lifting aid can also be purchased separately.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: E1TAH0029, grinding length: 600 mm, grinding width: 300 mm, grinding wheel diameter: 304 mm, table length: 600 mm, table width: 300 mm, TECHNICAL DETAILS Grinding length max.: 600 mm Grinding width max.: 300 mm Distance from table surface to spindle center: 585 mm Grinding wheel dimensions: 304 x 31.75 x 76.2 mm Table and magnetic plate Table size: 600 x 300 mm Magnetic plate: 600 x 300 mm Axis movements Hydraulic table longitudinal movement: 650 mm Automatic transverse movement: up to 310 mm Machining: fully automatic in 3 axes Spindle and power Grinding spindle power: 3.7 kW Spindle speed, frequency inverter max.: 2,100 rpm Machine bed: 780 x 750 mm MACHINE DETAILS Dimensions and weight Dimensions: approx. 2,700 x 1,600 x 1,850 mm Machine weight: approx. 1,990 kg EQUIPMENT Fully automatic machining in 3 axes Touchscreen control panel with program management Automatic central lubrication Cooling system with automatic paper filter Iiodpozgux Sefx Apcsg Enclosed splash guard with lighting Electronic handwheel

Condition: used, mileage: 10,916 km, power: 68 kW (92.45 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 8,200 kg, empty load weight: 3,700 kg, maximum load weight: 4,500 kg, axle configuration: 4x4, number of seats: 1, first registration: 03/1981, brakes: other, Year of construction: 1981, operating hours: 10,916 h, driver cabin: day cab, Equipment: all wheel drive, cabin, head guard, standard shovel, * German device * Condition, see photos * 10,916 operating hours * Faun Frisch wheel loader F1100B-C * 4x4 all-wheel drive * Bucket approx. 1.3m³ * 4,100 kg front axle * 4,300kg rear axle * Hydrostatic steering with hydraulics * Tight turning circle thanks to articulated steering * Deutz engine 4,710ccm with 68Kw * Protective roof * Speed approx. 35 km/h * Sun visor * Operating weight 8,200kg If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without new DGUV, without new SP, without new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note:  Iodpfxjv Efnlo Apcoig We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false impressions about their quality and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   All information is provided without guarantee. We are not liable for errors or incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - .

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: HWO 1/9-5.2​, - The system is located at the Geberit Keramik GmbH site in Wesel. - The system, including the associated safety technology, performs technical flash firing and re-firing and is prepared for this purpose. Iedpfx Aszu Nvzepcjig - Maximum firing temperature [°C] = 1300 - Current operating temperature [°C] = 1238 - Number of burner groups = 10 - Number of burners = 38 - Number of kiln cars = 18 - Number of kiln cars in the kiln = 9 - Current firing cycle [h] = 17 - 23 - Gross energy consumption [kcal/kg] / [kWh/kg] = 785 / 0.912 - Specific energy consumption [kcal/kg] / [kWh/kg] = 1459 / 1.696 - Gas connection capacity [m³/h] = 770 - Usable waste heat [m³/h] = 4000 - Standard loading quantity [pieces] = 900-980 ceramic products Dimensions of the housing: - Length [m] = 14.4 - Width [m] = 6.4 - Height [m] = 5.7 - Volume density [m³] = 146.3 Dimensions of the kiln car: - Effective length [m] = 1.45 - Effective width [m] = 5.2 - Effective height [m] = 2.156 - Track gauge [m] = 1.5 (2x) Special features: In 2023, the kiln was completely overhauled and brought up to the latest state of the art. The following changes were made: - Renewal of the kiln roof: The fiber lining in the upper area was replaced with cordierite stones. - Renewal of the burners, including new nozzles, flame tubes and controllers. - Replacement of the media valves; installation of servo motors on the gas and air lines in front of the burners. - Installation of new software; the Simatec control panel was replaced – control is now exclusively via the PC. - Replacement of the O₂ control system; installation of a Zerox probe; installation of an O₂ analyzer for O₂ correction (to improve energy efficiency by approximately 12–14 %). - The system must be dismantled, packed and collected independently by the buyer.

Condition: used, - Bongard 8.64 MG Series 4 - External dimensions: W 1440 x D 2700 x H 2600 mm - Baking chamber: W 680 x H 1900 mm Ijdpfx Aewr T Edepcsig - Rotating rack: 600 x 800 mm, 19 levels - Baking capacity: Up to 152 baguettes per batch - Rack rotation diameter: 1120 mm - Total baking surface: 9.1 m² - Heating capacity: 70 kW - Connection power: 0.18 kW - Maximum temperature: 280°C - Lifting mechanism: Rack with automatic lifting - Gas burner included for fast and even baking - Opticom electronic controls for precise baking parameter management - Pulsed steam injection, ideal for crispy and golden breads - Ergonomic handles and controls positioned on the right for easy operation - Fresh air intake at burner for optimal performance - Voltage: 400 V / 3-phase - Weight: 1390 kg - Serial number: 930000015837 - Year of manufacture: 2014 Bongard 8.64 Series 4 Rotary Rack Oven – Gas or Oil Fired – Used A Compact Solution for Efficient and Uniform Baking Lrjy Tdewr T Edjxugsr Discover the Bongard 8.64 Series 4 Rotary Rack Oven, an outstanding second-hand solution offering both compactness and high performance. Designed to meet the needs of demanding professionals, this oven is ideal for maximizing production efficiency while optimizing your bakery space. Superior Performance for Even Baking The Bongard Series 4 Oven stands out thanks to advanced technologies that ensure uniform and top-quality baking: - Soft Flow Ventilation: This technology provides gentle, uniform air circulation, perfect for baking delicate goods such as fine pastries and rolls. Thanks to even heat distribution, your creations will remain intact and achieve ideal baking results. - Efficient Steam System: Equipped with structured cast iron gutters, the oven produces high-quality steam to improve the development of your bakery goods. For greater needs, optional ESG steam units can boost steam production capacity, ensuring optimal performance. Durable and Practical Design The Bongard 8.64 Series 4 Oven is built to withstand the rigors of intensive production environments while providing excellent user comfort: - Robustness and Longevity: Fitted with a high-performance refractory stainless steel heat exchanger and a reinforced base, this oven is engineered for outstanding durability. Electric elements are rigorously selected for maximum service life. - Simplified Maintenance: The seamless stainless steel baking chamber facilitates cleaning. Features such as the raised-edged floor and retractable steam units minimize residue accumulation. The listing was translated automatically. Translation errors are possible.

Condition: used, mileage: 274,630 km, power: 225 kW (305.91 HP), first registration: 06/2005, fuel type: gasoline, color: black, gearing type: automatic, number of seats: 2, Equipment: air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, Special equipment: Audio navigation system: Autopilot system APS COMAND, electrically folding exterior mirrors, Bi-Xenon headlights, CD changer, fire extinguisher, velour floor mats, luggage retention strap(s), designo Alcantara headliner, comfort front seats (including ventilation, seat heating), multi-contour seat / multi-contour backrest front left, Parktronic System PTS (front and rear), gear selector lever grip wood/leather, heated windshield washer system, integrated garage door opener transmitter, exclusive leather upholstery, BOSE sound system, Linguatronic voice control system, TV tuner, roof rack system pre-installation, pre-installation for mobile phone, auxiliary heater (stationary heater) with remote control Further equipment: Driver/passenger airbag, active suspension/damping system (Active Body Control / Magic Body Control), electrically adjustable and heated exterior mirrors on both sides, outside temperature display, indicator integrated in exterior mirrors, tachometer, automatic driving light activation, interior trim: burr walnut wood, body: 2-door, climate control (Thermotronic), electrically adjustable steering column (steering wheel), alloy wheels, metallic paint, engine 5.0 L - 225 kW V8 24V CAT, tire pressure warning system, trip computer, front side airbags (sidebags), sun visors with illuminated mirrors, wind deflector (net), heat-insulating glazing / front: band filter / rear: ESG. Iiedowzggtopfx Apcsg

Condition: used, Press machine, REMS Power-Press XL ACC, used equipment Manufacturer: Rems Type: Power-Press XL ACC Pressing range: Ø 10 – 108 mm (up to 110 mm) Pressing force: 32 kN Motor: 450 W universal motor Power supply: 230 V or 110 V, 50–60 Hz Weight: approx. 5.5 kg Dimensions (H x W x D): 800 x 335 x 230 mm Cable length: 2900 mm Accessories: more than 400 types of REMS pressing jaws, adapters for other manufacturers Iiedexlp T Ijpfx Apceg Additional features: Automatic retraction (Automatic Circuit Control – ACC) Rotatable pressing jaw holder with automatic lock Compatible with pressing jaws from other manufacturers Fast pressing, e.g., Geberit Mapress stainless steel Ø 108 mm connection in 15 seconds Press jaws: 76.1; 88.9; 108 mm

Condition: good (used), Cologne S Smoking Shelter 2165 x 2500 x 2165 mm Whether on company premises, in public spaces, or in private areas, the Cologne S smoking shelter with right-hand access is a reliable choice for a practical and versatile shelter with timeless elegance for outdoor use. The Cologne S smoking shelter offers an ideal solution for reliable protection with maximum stability. The robust frame construction made of hot-dip galvanized and powder-coated square steel tubing guarantees durability and resilience. The steel components are primed and powder-coated (protection class: C4 medium). High-quality wall panels made of tempered safety glass provide protection from wind and rain. The roof is designed to easily withstand even very high wind and snow loads (wind load zone I-III/snow load 1.9 kN/m²). Whether used as a smoking shelter or a waiting area, this canopy blends seamlessly into any outdoor space thanks to its aesthetic design. The Cologne S smoking cabin is the perfect solution for a robust and modern shelter system. Reliable outdoor shelter with timeless elegance Access from the right when facing the shelter Flat roof with integrated gutter and downspout for drainage Galvanized and powder-coated steel construction Back and side walls made of tempered safety glass Manufacturer: Resorti Model: Cologne S Material of base structure: hot-dip galvanized and color-coated steel Roof material: galvanized trapezoidal sheet metal, underside color-coated Wall elements: tempered safety glass (ESG) Width: approx. 2165 mm Height: approx. 2500 mm Depth: approx. 2165 mm Foot area: approx. 4.30 m² Weight: approx. 520 kg Access: right Ground mounting: bolted down with base plate Delivery without bench Manufacturer's price for smoking shelter: €4,080 Iedpfxoynknte Apcoig Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, empty load weight: 14,100 kg, maximum load weight: 33,900 kg, overall weight: 48,000 kg, axle configuration: > 3 axles, first registration: 12/1999, suspension: air, tire size: 235/75 17,5, tire condition: 50 %, color: green, Year of construction: 1999, front tire size: 235/75 17,5, rear tire size: 235/75 17,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 68575 Nooteboom, Euro specification * Year of manufacture: 1999 * ABS (Anti-lock Braking System) * Air suspension * Suspension type: Air * Gross vehicle weight: 48,000 kg * Unladen weight: 14,100 kg * Payload capacity: 33,900 kg * Permissible gross weight: 48,000 kg * Axle manufacturer: SAF% * Tyre condition 1st axle: 50% -- 50% | Tyre size: 235/75 R17.5 * Tyre condition 2nd axle: 40% -- 40% | Tyre size: 235/75 R17.5 * Tyre condition 3rd axle: 50% -- 50% | Tyre size: 235/75 R17.5 * Tyre sizes: 235/75 R17.5 * Manufacturer: ES-GE * 3rd axle: hydraulically forced-steered * Telescopic extendable up to 9,950 mm * Telescopic extension defective * Loading platform length: 10,990 mm Disclaimer: Specifications are subject to change, prior sale, and errors excepted. More photos and videos are available on our website. Iiedpfjyibz Rox Apcog Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast and hassle-free financing options * Application for all (export) documents * Ordering of export plates / customs plates * Vehicle preparation: new tarpaulins, signage, painting, etc. * Professional loading / load securing * TüV approvals, registration service * Transfer of commercial vehicles Feel free to contact our trained specialist staff for professional advice.

Condition: used, mileage: 322,764 km, power: 243 kW (330.39 HP), first registration: 12/2020, fuel type: diesel, number of seats: 33, gearing type: automatic, axle configuration: 4x2, empty load weight: 11,090 kg, maximum load weight: 7,910 kg, overall weight: 19,000 kg, emission class: euro6, color: white, suspension: air, wheelbase: 6,000 mm, Equipment: ABS, air conditioning, cruise control, parking heater, Color: Pure White RAL 9010, Unladen weight: 11,090 kg, Permissible total weight: 19,000 kg, 64 standing places, Fabric upholstery, Tire size: 275/70 R22.5, 1st axle: , 2nd axle: , Air suspension, Air conditioning for passenger compartment: Spheros REVO 32 kW, Digital destination display: LAWO Futura 4-sided with LAWO ACTIVE Control control unit, Auxiliary heater: Thermo 300, Air conditioning for driver's area, Stop request button, Wheelchair space, Stroller space, Electronic Stability Program ESP, Fog lights, Leveling system, Kneeling function, Multi-function display: MAN instrument panel/FAP available, Floor covering: Rubber, Tinted windows: ESG side windows, grey tinted, Exterior mirrors: Electrically adjustable and heated, Digital tachograph, Electronic Braking System EBS, Stop brake, Roof hatch, Retarder: integrated, Twin tires, Reversing camera, Curb mirror, Sun visor, Speed limiter, Microphone, Wheelchair ramp, Digital instrument cluster: MAN instrument panel (digital), MAN Lion's City 12, MAN diesel engine (243 kW / 330 hp), Cruise control, ZF EcoLife 2 automatic transmission with integrated retarder, 33 passenger seats + 64 standing places, Wheelchair space on enlarged SNF opposite door 2, 4 folding seats on SNF, Passenger seats: MAN City / Advanced shell, Roof-mounted air conditioning: Spheros REVO 32 kW, Auxiliary heater: Thermo 300, Low-floor design with kneeling function, wheelchair ramp, and wheelchair/stroller space, Reversing camera, Video surveillance of passenger compartment with 7" TFT at FAP, Destination displays: LAWO Futura 4-sided with LAWO ACTIVE Control control unit, LAWO dual interior TFT with ProSys box, Errors, changes and prior sale reserved. Sale only to commercial customers. Iijdpfx Apszk Ru Rjceg

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, For PTO drive (200-450 hp). Equipped with a loading crane and a telescopic tipper body (hopper, 25 m³). Iiodpfx Apszz Ryujceg

Condition: used, functionality: fully functional, machine/vehicle number: W4X379M02776, Year of construction: 2001, operating hours: 410 h, load capacity: 1,000 kg, lifting height: 2,510 mm, free lift: 1,250 mm, fuel type: electric, mast type: duplex, construction height: 1,680 mm, fork length: 1,200 mm, drive type: Elektro, High-lift pallet truck Chassis number: W4X379M02776 Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: Good Battery voltage: 24V Battery capacity: 225Ah Battery year: 2001 Description: Linde L 10, Ref.: M0077, Year of manufacture: 2001, Recorded operating hours: 410 The machine is in good optical and technical condition, considering its age. An identical unit from the same year is available, featuring: Lift height (BH): 1940mm Overall height (HH): 3010mm Fork height (FH): 1490mm Fork length (GL): 1150mm Fast and straightforward transport can be arranged by agreement! This listing serves solely for identifying the device! A detailed description of the condition and possible features will be provided individually upon request! Errors and prior sale excepted, sale only to commercial customers. All sales of used equipment are made under exclusion of warranty and/or guarantee. If you have not found your desired forklift, please contact us. We have a wide selection of other units available on site. Iijdpsxnfbgefx Apcog

Condition: used, axle configuration: > 3 axles, first registration: 04/2007, total length: 13,400 mm, total width: 2,550 mm, suspension: air, tire size: 205/65R17.5, wheelbase: 9,800 mm, color: white, Year of construction: 2007, Equipment: ABS, Safe axle. 2 x trailing arm steering. Expandable. Lift roof. Sliding roof. Loading bed length: 910 cm. Floor height: 80 cm. Neck length: 390 cm. = Further information = Axle configuration Tire size: 205/65R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Double tires; tire tread depth left inner: 30%; tire tread depth left outer: 30%; tire tread depth right inner: 30%; tire tread depth right outer: 30% Rear axle 2: Double tires; tire tread depth left inner: 30%; tire tread depth left outer: 30%; tire tread depth right inner: 30%; tire tread depth right outer: 30% Rear axle 3: Double tires; tire tread depth left inner: 30%; tire tread depth left outer: 30%; tire tread depth right inner: 30%; tire tread depth right outer: 30% Rear axle 4: Double tires; tire tread depth left inner: 40%; tire tread depth left outer: 40%; tire tread depth right inner: 40%; tire tread depth right outer: 40% Weights Unladen weight: 9,940 kg Payload: 37,660 kg GVW: 47,600 kg Iiodpfxey N Aw Re Apcjg Identification Model number: 4STL48 / 4 AXLE / SLIDING ROOF / = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) / Wouter Greutink (NL-DE-GB-ES-IT) / Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the texts provided.

Condition: used, functionality: fully functional, machine/vehicle number: 6323138, Year of construction: 2014, operating hours: 2,407 h, load capacity: 1,600 kg, lifting height: 4,400 mm, free lift: 1,750 mm, fuel type: electric, mast type: triplex, construction height: 2,050 mm, fork length: 1,150 mm, drive type: Elektro, High lift truck Chassis number: 6323138 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Battery Volt: 24V Ijdpfouhwukjx Apceig Battery Ah: 265Ah Battery year of construction: 2014 Description: BT SPE 160 L No.: M0408 Year of construction: 2014 Operating hours: 2,407 The device is visually and technically in good condition. Identical machine built in 2012 available with BH 2010mm, HH 4150mm, GL 1150mm and operating hours 1508. Fast and uncomplicated transportation possible by arrangement! The advertisement only serves to identify the appliance! A detailed description of the condition and possible equipment will be provided individually on request! Subject to errors and prior sale, sale only to tradespeople. Any sale of used goods is subject to the exclusion of warranty or guarantee. If you have not found the forklift you are looking for, please contact us. We have a large selection of other equipment on site.

Condition: used, functionality: fully functional, Agilent 7500 Series G3155A Inductively Coupled Plasma Mass Spectrometer. The Agilent 7500 ICP/MS (Inductively Coupled Plasma Mass Spectrometer) is a cutting-edge analytical instrument known for its exceptional sensitivity and performance. With detection limits that go down to parts per trillion for most elements, the 7500 ICP/MS offers unparalleled sensitivity, enabling the accurate quantification of trace elements in various sample matrices. The instrument's wide dynamic range spans from sub-ppt to high ppm levels, accommodating diverse sample concentrations without compromising accuracy or precision. Capable of analyzing up to hundreds of samples per day, the 7500 ICP/MS provides rapid throughput, facilitating high-volume sample analysis in research, environmental monitoring, and industrial applications. Featuring robust interference removal capabilities and excellent stability, the instrument delivers highly accurate and precise quantitative results, ensuring confidence in analytical measurements. The Agilent 7500 ICP/MS is compatible with various sample introduction systems, including autosamplers and chromatographic interfaces, allowing for the analysis of complex sample matrices such as biological fluids, environmental samples, and geological materials. The Agilent 7500 ICP/MS is the instrument of choice for laboratories and research facilities requiring sensitive, fast, and quantifiable elemental analysis across a wide range of applications, including environmental monitoring, geochemistry, pharmaceutical analysis, and materials science. Ijdpfx Aeuaxzijpcoig Good working condition. Please check out our other listings as well.

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Iodsuzn Nnjpfx Apceig Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: used, operating hours: 8,454 h, mileage: 108,922 km, power: 175 kW (237.93 HP), first registration: 11/2012, overall weight: 15,000 kg, fuel type: diesel, color: yellow, axle configuration: 4x2, maximum load weight: 6,522 kg, empty load weight: 8,478 kg, next inspection (TÜV): 11/2022, wheelbase: 3,200 mm, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, cabin, onboard computer, parking sensors, power assisted steering, seat heater, soot filter, * German vehicle * Several times available * 1st hand * Condition, see photos * only 8,454 operating hours * Johnston VS650 sweeping & suction superstructure * Disk brush on the right and roller brush in the middle * Sweepings container with V2A floor pan * Tipping for emptying the hopper with cable remote control * Road washing device at the front * 1,400 liter water tank * Driver's cab with 2 seats * Air conditioning * 8-speed manual gearbox * EasyDrive (hydrostatic drive) (SN) * Multifunction steering wheel * Engine brake * Comfort driver's seat, air suspension * Heated seats * Reversing camera * Electric windows * Heated electric mirrors * Sun visor * Rotating beacon * Exhaust system raised * ABS and ASR * Hill start assist * Differential lock * Leaf/air suspension + raise/lower Iodpfx Apjvhpmqecjig * Self-propelled work machine Road cleaner * Wheelbase: 3,200 mm * GVW: 15,000 kg * Unladen weight: 8,478 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Year of construction: 2021, operating hours: 2 h, condition: new, functionality: fully functional, machine/vehicle number: 211 02 24, We offer the following for sale: Iiedpjy Dhr Njfx Apcsg For sale: GLOBAL Vacuum Presses GGTP-P-3116 Professional membrane vacuum press in excellent, like-new condition. The machine has only been used once and is virtually brand new. This equipment is an ideal choice for furniture manufacturing and woodworking applications: perfect for foil lamination, veneering, and precision pressing of curved and flat surfaces. It features a robust design, reliable operation, and uniform pressure distribution. Key features: - Model: GGTP-P-3116 Professional - Working area: approx. 3100 × 1600 mm - Membrane vacuum technology for precise and even pressing - Suitable for applying PVC foil, veneer, and other coatings - Sturdy, industrial-grade construction - Easy to operate Serial number: 2110224 Weight: 640 kg Year of manufacture: 2021 Pressure: 9.9 T/m² Power: 1.5 kW Frequency: 50 Hz Phases/Voltage: 3+N / 380 V Current consumption: 2.2 A If you have any questions or require further information, please send us a message or call us. The machine is ready for immediate use, in as-new condition, and can be tested on site.