Used Geberit Esg for sale (62)

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 1,000,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC) Bjdpfeud N Hdex Afgewu  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: used, Rotary transfer table, rotary indexing table with 16 stations Rotary transfer machine + hydraulic press TOX Rotary transfer machine, special-purpose machine with several assembly stations Manufacturing and assembly system using a rotary transfer process From the special-purpose machine manufacturer "AKE-technologies GmbH" Serial number: Order number: 11111 Year of manufacture: 2012 - large rotary indexing table WEISS, type TC500, with 16 stations - pressing station with TOX power unit - vibratory conveyor - conveyor belts - inspection stations - some stations are still visible in the pictures but have already been dismantled Bwodpfx Afjgd D U Eegeu Space requirement L x W x H approx. 3500 x 2750 x 2300 mm Weight approx. 3000 kg All in like-new condition - The system has never been used in series production.

Condition: new, maximum load weight: 15,825 kg, overall weight: 20,500 kg, axle configuration: 2 axles, loading space width: 2,480 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Bwedpfxoz Dmn Dj Afgsu Complete equipment list available upon request. Chassis * Steel welded construction made of welded longitudinal beams and pierced Z-shaped cross members * Narrow cross member spacing for high ground load, ramp storage * Between the longitudinal beams behind the axle assembly, below the loading area, two insertion pockets for one access ramp each * with locking plate in the head frame at the rear. Under-ride guard * according to EC Front kingpin * Kingpins with single-side operation * Rear support: Two adjustable drop-leg supports Axles * 2 x 10 t air suspension axle assembly * Manufacturer: SAF * Disc brakes approx. 370 x 45 mm * Wheel connection: 8-hole, center-mounted for twin tires, ABS * Total stroke of the air suspension approx. 310 mm, of which lifting approx. 250 mm and lowering approx. 60 mm * Control via hand lever with detent function. Tires * 8-ply, 265/55R 19.5 - Manufacturer: Goodyear * on steel rim 8.25 x 19.5. * Splash guard: made of PVC in front of and behind the axles according to EC Load securing * In the outer frame, a hole for lashing straps every approx. 150 mm, tensile force approx. 2.5 t (lashing straps can be attached when the side walls are closed, sloping outer frame) * 6 pairs of folding lashing rings, evenly distributed, tensile force approx. 8 t. * Recess pockets for stake pockets 80/50: 3 pairs of recess pockets in the outer frame, evenly distributed. Braking system * Compressed air braking system according to EC with EBS * Two spiral hoses as connection to the towing vehicle with coupling head red/yellow. * Spring brake on one axle. Floor * Approx. 28 mm Z-shaped hardwood floor embedded in the outer frame. Headboard * Removable from 25 mm side wall Lighting system * Lighting system according to EC, 24 Volt * Multi-chamber rear lights * License plate lights * Side marker lights and position lights at the rear * Connection plate on the left on the drawbar including connection cable with 15-pole and 2 x 7-pole plugs. Paint finish * Chassis shot-blasted, cleaned and high-quality hot-dip galvanized according to the latest technology. * Superstructure parts cleaned, primed and hot-dip galvanized * Chassis: Hot-dip galvanized + RAL color of your choice * Side walls and side wall posts: RAL color of your choice * Under-ride guard: RAL 9010 pure white * Hubs: KTL black rims: RAL 9006 silver * Attachments: galvanized / KTL black * Contour marking: acc. to EC, yellow on the side and at the rear Incl. Accessories * Rear extension approx. 800 mm incl. under-ride guard * extendable loading platform, load capacity approx. 2 t, locking every approx. 200 mm * Mechanically adjustable fixed drawbar in length, 6 x approx. 100 mm * with screwed towing eye approx. 50 mm according to DIN 74053 * 4 rows of recess pockets transverse to the loading area, evenly distributed * 12 pieces of stake pockets made of galvanized tube, approx. 80/50/4 mm * approx. 1,000 mm long container locks for 1x20? container, extendable to approx. 2,820 mm, according to ISO 1496, EN 284 or EN 452 * 1 pair of aluminum access ramps * Load capacity per pair approx. 9,000 kg * 4 x stainless steel tool boxes between or behind the axles, 6 x 25 mm * Side walls and rear wall made of extruded aluminum hollow profiles, approx. 600 mm high, foldable and removable * removable Kinnegrip stakes

Condition: new, maximum load weight: 63,960 kg, overall weight: 76,500 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis * Welded construction made of high-quality steel profiles with continuous profile crossmembers * Designed for high point loads * Outer frame made of UNP steel Fifth Wheel Coupling * 2-inch kingpin Under-ride Protection * Compliant with EC standards, bolted design Side Under-run Protection * Compliant with EC standards Landing Gear * With single-side operation on the right * Support load approx. 66 t / lifting capacity approx. 24 t. Axles * 5 x 10 t air suspension axle assembly * Manufacturer: SAF * With drum brake approx. 400x200 mm * ABS, AGS * Wheel connection centrally mounted, 10-hole with ET 0 * Total air suspension travel approx. 200 mm * Of which lifting approx. 140 mm and lowering approx. 60 mm * Control via rotary slide valve with detent function Steering * 1 axle with trailing steering * 2nd axle fixed * 3rd, 4th and 5th axles with forced steering via tie rod * Lubrication points of swivel bearing centrally located outwards * Axle lift: first and second axles automatically liftable * With additional shutdown on the chassis Braking System * Two-circuit compressed air braking system compliant with EC with EBS and RSS * Automatic load-dependent regulation * Manufacturer: Wabco. * Spring-loaded cylinders as parking brake * Interchangeable secured coupling heads firmly mounted on the front cross member * Without connecting line to the tractor unit * Aluminum air tank Tires * 10x 445/65 R22.5 164J on rim 14.00 x 22.5 ET 0 * Manufacturer of our choice * TPMS: Tire pressure monitoring system TPMS according to ECE R141 * With data transmission to the tractor unit Fenders * Compliant with EC standards, 1st axle at the front, 2nd axle at the rear * 3rd, 4th and 5th axles each one 1/4 PVC fender at the front and rear * Rear fender with mud flaps. Load securing * 5 pairs of folding lashing rings * Evenly distributed (tensile force approx. 24.5 t) * 11 pairs of hook plates welded into the outer frame (tensile force approx. 3 t) * 10 pairs of lashing rings in the outer frame on the side, evenly distributed (tensile force approx. 10 t) * Recess pockets: - 10 pairs of recess pockets recessed in the outer frame * 6 pairs of recess pockets recessed in the floor (on the outside of the longitudinal beam) * Stake pockets: - 16 pieces of galvanized stake pockets, approx. 80x80x8 mm, approx. 850 mm usable length (with locking mechanism) * Stake magazine: one magazine for 8 pieces each on each side in front of the front wall * Stake pockets approx. 80/80 mm Front Wall * Bolted corner stakes with a steel approach plate over the entire width and height. Floor * Approx. 28 mm Z-hardwood floor recessed in the outer frame flush Bwjdpfx Aoz Dmndefgou Lighting System * Compliant with EC standards, 24 volt with multi-chamber lights * LED side marker lights * LED position lights white at the front * LED outline lights at the rear * License plate lights. 1x15 and 2x7-pole. Plug connection on the front cross member Equipment * Outrigger with holder, double * Warning sign according to ECE 70 * Work lights on the lamp carrier (switched via reverse gear) * Holder for rotating beacon at the rear (incl. rotating beacon) * One climbing ladder each side fixed including pluggable climbing aid - * Smart Board * Sticker "Vehicle swings out" * Sticker "Center of gra

Condition: new, maximum load weight: 16,180 kg, overall weight: 20,500 kg, axle configuration: 2 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment: Complete equipment available upon request. Chassis * Steel welded structure made of welded longitudinal beams and pierced Z-shaped cross members * Narrow cross member spacing for high ground load capacity * Ramp storage between the longitudinal beams behind the axle assembly * Two pockets below the loading platform for one ramp each * With locking plate in the head frame at the rear Under-run protection * Compliant with EC regulations Front bolster * Bolsters with single-sided operation * Rear support: Two adjustable drop-down supports Axles * 2 x 10 t air suspension axle assembly * Manufacturer: SAF * Drum brakes approx. 300x200mm * Center-mounted for twin tires, ABS * Total travel of the air suspension approx. 200mm * Of which lifting approx. 140mm and lowering approx. 60mm * Control via hand lever with detent function Tires * 8x, 235/75 R17.5 * Manufacturer of our choice * Mounted on rim 6.75X17.5 with offset Splash guards * Made of PVC in front of and behind the axles, compliant with EC regulations Load securing * One hole for lashing straps in the outer frame approximately every 150 mm * Tensile force approx. 2.5 t * 6 pairs of folding lashing rings evenly distributed, tensile force approx. 8 t * Recess pockets for lashing bars 80/50 * 3 pairs of recess pockets in the outer frame, evenly distributed. Braking system * Air brake system compliant with EC regulations with EBS * Two spiral hoses as connection to the towing vehicle with coupling head red/yellow * Spring brake acting on one axle. Floor * Approx. 28 mm Z-shaped hardwood floor recessed in the outer frame. Lighting system * Lighting system compliant with EC regulations, 24 Volt * Multi-chamber rear lights Bodpfoz Dmnkox Afgowu * License plate lights * Side marker lights and position lights at the rear * Connection plate on the left on the drawbar, incl. connection cable with 15-pin and 2 x 7-pin plugs. Painting * Chassis blasted, cleaned and hot-dip galvanized with state-of-the-art technology. * Superstructure parts cleaned, primed and hot-dip galvanized * Chassis: Hot-dip galvanized + RAL color of choice * Hubs: KTL black * Under-run protection: RAL 9010 Pure White * Rims: RAL 9006 Silver * Attached parts: galvanized / KTL * Black contour marking: acc. to EC, yellow on the side and rear (with ES-GE logo) Incl. accessories * Rear extension by approx. 800 mm incl. under-run protection * Extendable loading platform * Load capacity approx. 2 t, locking every approx. 200 mm * Mechanically adjustable fixed drawbar in length, 6 x approx. 100 mm * With screwed drawbar eye approx. 50 mm acc. to DIN 74053 * 4 rows of recess pockets transverse to the loading area, evenly distributed * 12 pieces of lashing bars made of galvanized tube, approx. 80/50/4 mm, approx. 1,000 mm long * Container locking for 1x20? container, container locking 1 x 20? extendable to approx. 2,820 mm, acc. to ISO 1496, EN 284 or EN 452 * 1 pair of aluminum ramps, load capacity per pair approx. 9,000 kg * 4 x stainless steel toolboxes between or behind the axles * 2 wheel chocks with holder * Rotating beacon pluggable at the rear * Delivery of a 40-unit towing device (GG max. 13,500 kg)

Condition: new, maximum load weight: 35,510 kg, overall weight: 43,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment. Complete equipment available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile cross members, designed for high point loads. Underride guard, width approx. 700 mm, outer frame as UNP profile, wear plate approx. 8 mm, goose neck height front approx. 130 mm Fifth wheel coupling: * 2-inch kingpin Underrun protection: * Bolted design, according to EC Side impact protection: * According to EC, made of aluminum profiles, anodized Kingpin supports: * 2 x 12 t kingpin supports with leveling foot and one-sided operation on the right side Axles: * 3 x 9 t air suspension axle, manufacturer SAF, disc brakes 22.5" * Total stroke approx. 180 mm, raising and lowering device via rotary slide valve Braking system: * Two-circuit compressed air braking system according to EC with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, interlockable coupling heads permanently mounted on the front cross member, without connection line to the towing vehicle Tires: * 6 tires, 385/55 R22.5 160J on steel rim 11.75 X 22.5 ET 120, manufacturer of our choice * Tire pressure monitoring system (TPMS) via CAN-bus system of the EBS Fenders: * According to EC Spare wheel holder: * None Load securing: * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t * In the outer frame, holes approx. every 400-600 mm for attaching lashing straps Front wall: * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior lined with approx. 9 mm screen-printed flooring (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor embedded in the outer frame with galvanized omega steel profiles Lighting: * According to EC, 24 volts, with multi-chamber lights, LED side marker lights, LED position lights white front, LED outline lights rear, license plate lights * Lane-keeping lights LED * 1x15- and 2x7-pole connector sockets on the front cross member Bwsdpfx Afjzhd Ncogou Equipment: * Warning signs ECE 70 * Holder for rotating beacon, including rotating beacon * Foldable and extendable access ladder at the rear right (without platform) * 1 open box made of perforated sheet metal, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles Painting: * Front wall: RAL 5010 azure blue * Chassis: Hot-dip galvanized * Outer frame: Hot-dip galvanized + RAL 5010 azure blue * Crossbars: RAL 5010 azure blue * Kingpin supports: Aluminum, anodized * Underrun protection: white (RAL 9016 traffic white) * Attachments: galvanized/KTL black * Rims: silver Accessories: * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of crossbar pockets in the outer frame, evenly distributed * 4 rows of crossbar pockets transverse to the loading area * 20 pieces of crossbars made of galvanized tube 80/50, total length approx. 1,200 mm * Inside on the front wall, a magazine for 20 pieces of plug-in crossbars * 5 x 25 mm side boards and rear wall made of anodized aluminum hollow profiles, foldable and removable, removable crossbars * Side board magazine under the chassis left and right * Sliding rails for side boards * Container locks for 1 x 40" and 2 x 20" containers, flush at the rear * Containe

Condition: new, maximum load weight: 37,350 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous crossmembers for high ground and point load capacity, with a heavy-duty outer frame. * Loading platform at the rear as a steel welded structure with two welded-in tracks made of 5-hole steel sheet (hole pattern System Lohr/Rolfo) with a length of approximately 2,250 mm, hydraulically lowerable by approximately 350 mm. * Integrated loading platform at the rear of the vehicle, approximately 1,500 mm, hydraulically extendable as a steel welded structure with 5-hole steel sheet (hole pattern System Lohr/Rolfo) cover, light fitting, and 2 ramp compartments and ramp supports. * The drive and control of the rear section are provided by an electric hydraulic unit mounted in a stainless steel box on the left of the chassis, with a radio remote control. * Power supply via the vehicle battery of the towing vehicle. * NATO socket on the front wall, without connecting cable to the tractor unit. Fifth wheel coupling: * 2-inch kingpin, replaceable from below. Under-ride protection: * According to EC, permanently mounted. Support legs: * 2 x 12 t support winches with a 2-speed gearbox. Axles: * 3 x 10 t air-suspended axle unit, manufacturer SAF with disc brake approximately 370 x 45 mm, ABS, wheel connection 10-hole center-mounted ET120, total stroke of the air suspension approximately 200 mm, of which lifting approximately 140 mm and lowering approximately 60 mm, control of the air suspension via hand control with stop function. Steering axle: * 3rd axle as a trailing steering axle with manual and automatic reverse steering lock. Lift axle: * 1st axle automatically liftable, also switchable via operation on the chassis frame or via PIN 12 of the light socket. Tires: * 6 tires, 445/45R19.5, manufacturer of our choice, mounted on rim 14.00X19.5, 10-hole ET120. Fenders: * According to EC, 1/4 PVC fender in front of and behind the wheels of the 1st axle in front and behind, 2nd and 3rd axles in the rear. Tire chock holder: * None Braking system: * Two-line braking system according to EC with EBS, automatic load-dependent control. * Spring brake accumulator as parking brake acting on 2 axles, interlock-protected coupling heads permanently mounted on the front crossmember, without connecting line to the tractor unit. Manufacturer Wabco. Lighting system: * According to EC, 24 volts, multi-chamber rear lights, license plate lights, LED side marker lights, LED position light white in front and LED side marker lights at the rear, 15-pole socket and 2x7-pole sockets permanently mounted on the front crossmember, without connecting lines to the tractor unit. Load securing: * 9 pairs of folding lashing rings evenly distributed, tensile force approximately 8 tons. * 7 pairs of folding lashing rings evenly distributed, tensile force approximately 2.5 tons. * 2 pairs of folding lashing rings at the rear of the vehicle, tensile force approximately 2.5 tons. * In the outer frame, holes for lashing straps at approximately 500 mm intervals. Lashing stakes: * 16 lashing stakes approximately 100/40 mm, approximately 800 mm usable length. Lashing stake pockets: * 8 each on each side embedded in the outer frame. Bwjdpoy Up S Sjfx Afgeu * 4 rows of stake pockets transverse to the loading area. Fl

Condition: new, maximum load weight: 56,570 kg, overall weight: 66,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle stock, with vehicles available for immediate and short-term delivery, on our website. Extract from the equipment list. Full specification available on request. Chassis: * Chassis frame construction with welded longitudinal beams and through-running cross members * Rear underrun bar approximately 700 mm wide * Fifth wheel plate at least 8 mm thick, fitted between the longitudinal beams * Maximum cross member spacing 400 mm (for longitudinal floor installation) * 3.5-inch kingpin according to SAE standard, replaceable * Outer frame as UNP 200, open to the outside Landing Gears: * 24 t JOST - MODUL CH (Heavy Duty) telescopic landing gear with S-foot Axles: * 4 x 10 t SAF axles with large drum brakes * 22.5 single tires * Axle spacing approx. 1,700/1,810/1,810 mm * Air suspension unit with 10 t load capacity each, lift and lower device with 1 rotary valve Knorr/Wabco * Holder for lift and lower device, bolted design Bjdpewx Dctjfx Afgswu Braking system: * Smartboard/TIM/Infocenter at the lift/lower holder, additionally to the lift/lower valve, without battery (operable only with towing unit) * Mount for light and brake at the front underrun bar, total height approx. 700 mm * Basic version tire pressure monitoring, connected to CAN bus system of the EBS * With double-release valve for brake and spring brake actuator * Test port for brake cylinder pressure on the front right brake cylinder * 1 red and 1 yellow coupling head each * Lift and lower device mounted at rear left in driving direction * EBS braking system by Wabco, EBS diagnostic via CAN bus (EBS plug), no external diagnostic cable! Tyres: * 8 x 445/65 R 22.5 – premium brand of our choice * Centering rings Lubrication: * Grease nipple strips at the bogies and front steering, no central lubrication Superstructure: * Without body certificate according to DIN EN 12642 XL * 2x LED work lights on top of front wall (facing rear), switch at lift/lower holder * Front wall for platform design, heavy duty * Side outline marking yellow, rear yellow * Front wall approx. 800 mm high, with metal cladding, bolted Lighting: * 2x LED work lights fitted in lamp panel, controlled by reverse gear * 2x LED work lights, controlled by reverse gear, one each side near the landing gear * 2x LED reversing lights, one each side in front of first axle * Lighting/wiring system, brand of our choice * Number plate illumination * The towing vehicle must supply sufficient power for the selected lighting (especially reverse light) * Position lights front, bottom, white, one each side (LED) * 24 volt lighting system with large multifunction light * Flashing side marker lights (LED) * 1x 15-pin and 2x 7-pin connections at the front via multifunction box * EBS socket * 1 pair of lane marker lights (LED) Floor: * Hardwood floor approx. 28 mm thick, alternately with galvanized omega steel profiles Paint/Coating (no metallic finishes): * Chassis painted in RAL color of your choice, front wall (steel construction) in RAL color of choice * Axle hubs in chassis color * Axles and landing gear black * Wheels in aluminum/silver similar to RAL 9006 * Wheel nuts untreated * Underrun protection painted RAL 9010 pure white (aluminum) Accessories: * Lifting device for 1st axle * 9 lashing plates welded into the outer frame per side, lashing capacity max. 3,000 daN * 12 RUD-SLP lashing points per side with

Condition: new, maximum load weight: 39,070 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Partial list of features. Full equipment details available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile cross-members, designed for high point loads * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide Coupling device: * 2-inch kingpin (also prepared for 3.5-inch) Underrun protection: * According to EC regulations, bolted design Side underrun protection: * According to EC regulations Landing gear: * 24 t landing legs with single-sided operation (approx. 66 t test load), Jost Modul CH (Heavy Duty) S-foot Axles: * 3 x 9 t air suspension axle units, brand SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted with 10-lug ET 120, total air suspension stroke approx. 200 mm (approx. 140 mm lift, approx. 60 mm lower), control via rotary slide valve with detent, with RTR function * Switch for second ride height (+ approx. 50 mm) on the holder of the lift/lowering device * Smartboard/TIM/Infocenter, without TPMS display Lift axle: * First axle liftable, with fully automatic load-dependent lift control, start aid via button in driver's cab (15-pin socket PIN12). Button in cab not included in delivery Brake system: * Two-line compressed air braking system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, non-interchangeable coupling heads permanently mounted on the front cross beam, without connecting line to the tractor, brand Wabco Bwodpfx Afsyz E T Sjgju Tyres: * 6 units, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand at our discretion), ET 120 * Basic tyre pressure monitoring, connected to the CAN-bus system of the EBS * Tyre pressure monitoring display in driver's cab (prepared by the tractor manufacturer) Mudguards: * According to EC regulations, PVC mudguards (half-shells) over all axles * Anti-spray mud flaps Load securing: * 8 pairs of hook plates welded into the outer frame (traction approx. 3 t) * 6 pairs of lashing rings on the side of the outer frame, evenly distributed (traction approx. 10 t) Stake pockets/stakes: * 5 pairs of stake pockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 plug-in stakes made of galvanized square tubing, approx. 80 x 80 x 4 mm, with bottom stop Front wall: * Bolted front wall, approx. 1,200 mm high, metal plated Stake magazine: * Magazine for plug-in stakes inside the front wall Floor: * Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting system: * According to EC regulations, 24V with multi-chamber lights, LED side marker lights, LED position lights (white, front), LED outline marker lights (rear), license plate lights * 1x 15-pin and 2x 7-pin connectors on the front cross beam Equipment: * Warning sign according to ECE 70 * 2 LED work lights mounted on the lamp bracket (switched via reverse gear) * Bracket for rotating beacon at the rear (incl. beacon) * 1 foldable, extendable access ladder at the rear (without platform) * 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of the front wall * Smart-Board with axle load display * 2 LED work lights above the front wall, switchable via chassis frame switch * 2 LED work lights at the height of the supports (switched via reverse ge

Condition: new, maximum load weight: 32,155 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile crossmembers. Designed for high point loads. Fifth Wheel: * Fifth wheel plate with 2-inch King Pin. Rear Underrun Protection: * According to EC standards, bolted design. Side Underrun Protection: * According to EC standards. Landing Gears: * 2x 12 t landing gears with leveling foot and one-sided operation on the right side in the direction of travel. Axles: * 3x 9 t air suspension axle, manufacturer SAF, with disc brake approx. 430 x 45 mm, wheel mounting center-mounted ET120, ABS, total travel of the air suspension approx. 180 mm, including lifting approx. 110 mm and lowering approx. 70 mm. * Control of the air suspension via hand control with stop function. Steering: * Last axle mechanically forced steering. Axle Lift: * First axle liftable, with fully automatic, load-dependent lift control. Braking System: * Two-line compressed air braking system according to EC standards with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, fail-safe coupling heads permanently mounted on the front crossmember, without connection line to the tractor. * Manufacturer: Wabco. Tires: * 6, 385/65 R22.5 160J on rim 11.75 X 22,5 ET 120 - manufacturer of our choice. Including tire pressure monitoring system, tire pressure display in the driver's cab (pre-installation by the tractor manufacturer). Fenders: * According to EC standards, 1/4 PVC fenders in front of and behind the axle. Load Securing: * 9 pairs of folding lashing rings, evenly distributed (tensile force approx. 8.0 t). * 8 pairs of folding lashing rings, evenly distributed (tensile force approx. 2.5 t). * In the outer frame, a hole for lashing straps is provided every approx. 500 mm (lashing straps can be hooked into the closed side walls, beveled outer frame). Stake Pockets: * 10 pairs of stake pockets in the outer frame, evenly distributed. * 4 rows of stake pockets transverse to the loading area. * Stakable stakes: 20 stakes made of galvanized tube approx. 80/50 mm, total length approx. 1,000 mm. * Inside on the front wall, magazine for 20 stakable stakes. Front Wall: * Reinforced steel construction, fixed, inside covered with approx. 9 mm screen-printed floor (approx. 1,250 mm high). Floor: Bodpfx Afey Auhzegewu * Approx. 28 mm Z-hardwood floor embedded in the outer frame. Side Walls: * 4 x 25 mm side walls and rear wall made of extruded aluminum profiles, foldable and removable, removable Kinnegrip stakes. * Side wall and stake magazine: under the chassis. * Left and right insertion rails for side walls and stakes. Lighting System: * According to EC standards, 24 volts with multi-chamber lights, LED side marker lights, LED position lights white at the front, LED outline lights at the rear, license plate lights. * 1x 15-pin and 2x 7-pin connector on the front crossmember. Equipment: * Chock with holder, two units. * Warning signs according to ECE 70. * Work lights on the lamp carrier (switched on via reverse gear). * Holder for rotating beacon on the rear, incl. rotating beacon. * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm. Paint Finish: * Chassis and front wall sandblasted, primed and single-color top coated. * Chassis: hot-dip galvanized + R

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately and soon available units, on our website. Equipment excerpt; full equipment details available on request. Chassis: * Welded construction made from high-quality steel profiles with through cross beams, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Fifth wheel plate approx. 8mm * Neck height at front approx. 130 mm Coupling device * 2-inch kingpin Rear underrun protection * Bolted version, in compliance with EC regulations Side underrun protection * According to EC regulations, made of anodised aluminium profiles Landing legs * 2 x 12 t landing legs with compensating foot and single-side operation, RHS in direction of travel Axles * 3 x 9 t air suspension axle assemblies, disc brakes 22.5” * Total stroke approx. 180 mm * Lifting and lowering device via rotary slide valve Braking system * Twin-line compressed air braking system to EC specifications, with EBS and RSS, automatic load-dependent control * Spring chamber cylinders as parking brake * Polarity-protected coupling heads permanently mounted on front cross member, without connecting line to towing vehicle Tyres * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN bus Mudguards * According to EC regulations Spare wheel holder not included Load securing * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 2.0 t * Drill holes for attaching lashing straps every approx. 400–600 mm in the outer frame Bwodsw U H Sbepfx Afgeu Front wall * Reinforced fixed steel structure, approx. 1,400 mm high * Inner face lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor let into the outer frame with galvanised omega steel profiles Lighting system * In compliance with EC, 24 volt, with multi-chamber lights * LED side marker lights * Front white LED position lights * Rear LED outline marker lights * Number plate lights * LED lane departure lights * 1x15- and 2x7-pin plug connections at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning boards * Bracket for rotating beacon, incl. rotating beacon * 2 rubber buffers at the rear * Foldable and extendable access ladder at rear right (without platform) * 1 open perforated sheet metal box, transverse to direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: RAL single colour as requested * Chassis: hot dip galvanised * Outer frame: hot dip galvanised + single RAL colour as requested * Centre stanchions: single RAL colour as requested * SSV: aluminium, anodised * Rear underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised / KTL black * Rims: silver Conspicuity markings * Complete set in yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets across the loading area * 20 stanchions made of galvanised tube 80/50, total length approx. 1,200 mm * Magazine for 20 removable stanchions inside the front wall * 5 x 25 side walls and rear wall made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Side wall and stanchi

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 30214501, turning length: 2,000 mm, total length: 12,000 mm, WFL Millturn M60/2000 WORKING RANGE center distance mm 2000 swing over bed, turning diameter mm 690 MAIN DRIVE AC-drive with 2 gear steps drive power 100% duty cycle kW 40 max. speed min-1 3300 max. torque at the spindle 100% duty cycle Nm 1830 Bedpfeu Hl R Tox Afgowu TAILSTOCK quill diameter mm 140 quill travel mm 160 quill force (adjustable) N 3500-31000 quill with installed live center MK 5 TOOL HOLDER (single tool holder, turning-boring-milling unit) AC-drive drive power 100% duty cycle kW 30 speed range max. min-1 6000 max. torque at the spindle 100% duty cycle Nm 315 travel vertical to the X/Z-plane (Y-axis) mm 300[-125/+175] pivot capability of the milling spindle (B-axis) ° -110/+90 spindle head acc. DIN 69893 HSK-A100 spindle diameter in front bearing mm 100 DIMENSIONS length (max. tool magazine) m 11 width/height m 3,9/3,3