Used Gebr Hezel for sale (440)

Condition: used, Year of construction: 1981, Insulated and clad stainless steel pressure tank with various fittings. Additional title: insulated tank Capacity: 12800 l Pressure: 4 bar Temperature: 20 °C Length: 5,1 m Width: 2,1 m Weight: 2000 kg Material: stainless steel Position: hozizontal Features: insulated and cladded, outlet DN65, manhole, 2 spray heads Kedpfsztyy Usx Ahgonb

Condition: excellent (used), Liebisch Type: S 1000 A-TR / 42016211 Chamber-type testing equipment with a 1000-liter test chamber volume for salt spray tests. Constamatic® TR This series includes automatically controlled chamber-type testing equipment of type A-TR. The internal device control is operated via a touchscreen. All functions are displayed on a touchscreen with intuitive user guidance. Technical data: Device type: S 1000 A-TR External dimensions of the housing: (W x D x H in mm) 2600 x 1120 x 1210 Internal dimensions of the test chamber: (W x D x H in mm) 1535/1425 x 800/780 x 660/650 Max. load of the sample holder: 10 kg / shelf 10 kg Operating voltage: 230 V +6/-10% Connected load S: 2700 W Control range for humidification S: up to 70°C Control range for test chamber K: up to 50°C Control range for test chamber S: up to 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Over-temperature protection: yes Volume of test chamber: 1000 liters Stock of test solution: approx. 150 liters Test solution consumption / hour: approx. 0.7 – 1.0 liters Water filling of the base pan: 15 liters Weight: 450 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone. Knedpfx Ahjzh Ht Rjgeb

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: SV 5960/1, overall weight: 73 kg, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, input current: 21 A, type of input current: three-phase, rotational speed (max.): 2,930 rpm, protection type (IP code): IP55, For sale is a high-performance air blower / side channel compressor with a high-quality 11 kW three-phase motor. This unit is suitable for industrial applications such as ventilation and exhaust systems, dust extraction, pneumatic conveying, drying systems, or process air supply. Technical data: Power: 11 kW Voltage: 400 V (three-phase) Frequency: 50 Hz Current consumption: 21.8 A Speed: 2,930 rpm Efficiency: IE3 Premium Efficiency (91.2%) Protection class: IP55 Insulation class: F Operating mode: S1 (continuous operation) Frame size: 132M Ksdpfxsy U Uhle Ahgonb Design: IMB5 Ambient temperature: up to 40 °C Weight: approx. 73 kg Made in Germany

Condition: used, Liebisch KEA 300 Constanzo Functional condensate water test device for material and coating testing Description: This device is designed for performing condensate water or water vapor tests in accordance with common standards (e.g., DIN EN ISO 6270). It is ideal for testing the moisture and corrosion resistance of coatings, paints, metals, and plastics. The design is robust, low-maintenance, and perfectly suited for research, laboratory, and quality control applications. Technical specifications: Manufacturer: LIEBISCH Model: KEA 300 Constanzo Nominal power: 1,400 W Chamber dimensions: approx. 500 × 450 × 500 mm (W × H × D) Voltage: 230 V / 50 Hz Chamber material: Stainless steel, corrosion-resistant Controls: None / manual operation Important notice: "The table shown in the photos is not included in the sale." Knjdpozii Aqjfx Ahgob Condition: used Scope of delivery: (See image) (Subject to changes and errors in technical data; specifications may be updated!) If you have any further questions, feel free to contact us by phone.

Year of construction: 1984, condition: ready for operation (used), Distance between the uprights: 4300mm, cutting length: 4050mm, blade length: 4200mm, cutting angle adjustable: 1.5-2.5°, min./max. strip width with front gauge: 40mm, min./max. strip width with rear gauge: 1000mm, table height above floor: 850mm, table length: 4200mm, table width: 650mm, with 3 extension arms each 500mm, internal distance between cutting blade and hold-down plus 10mm: 35mm, lower blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, upper blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, guide rulers for square cuts: 1 piece, accessories/special equipment: gauge adjustment, table extension, sheet metal chute, side gauge 1000mm, cutting line illumination, with documentation. An on-site inspection is possible. Kjdpfxey U Nqbo Ahgenb

Condition: used, Year of construction: 1993, Technical details: material: PUR Schaum Rotor-Ø: 315 mm compressed air: 6 bar The milling plant with milling and opening-up machine REKORD BR-ex (explosion proof up to 3 bar absolute) is intended exclusively for grinding PUR (polyurethane) foam. Data of the processable material: - pre-comminuted PUR foam pieces max. 20mm - humidity so that milling is still possible - throughput volume=approx. 130kg/h Drives: - 5 drives (all geared motors) for roller dosing units, mill drive (squirrel cage motor), mixer, discharge screw conveyor, bucket wheel * Kjdpfou Nxdfox Ahgjnb

Condition: good (used), -KOM 1613- On offer here is a Gebr. Dickertmann hoist with a Demag chain hoist type PK2-F. Technical data chain hoist: Type: PK2-F Year of construction: 1968 With one load line: Load capacity (kg): 250 Main speed (m/min): 10 Fine stroke speed (m/min): 2.5 With two load lines: Load capacity (kg): 500 Kjdpfjvca Ubex Ahgonb Main speed (m/min): 5 Fine stroke speed (m/min): 1.25

Condition: ready for operation (used), * Brand: Gebr. Pfeiffer Knjdpfxozakl Ns Ahgob * Type: ball mill * Length: 4000 mm * Inner diameter: 1700 mm * Power: 110 kW e-motor * Includes: grinding balls 30–60 mm * With: rubber inner lining and protective covers * In stock: 2 units

Condition: used, Year of construction: 1971, Technical details: grinding length: 700 mm workpiece height: 80 mm Table dimensions: 105 x 725 mm feed range: mechanisch total power requirement: 0,8 kW dimension machine xH: 0,7 x 1,3 x 1,4 m Application: Grinding of linear surfaces for shearing knives and div. tools. Grinding support: -Vertical adjustment travel 45mm hand crank. -speed 2840 rpm -rotate 20° right/left -swivel 40° back and forth table: -with stop bar 730mm -equipped with 2x clamps / 2x fences -grinding depth by manual adjustment 80mm Kodpfxou Ngk Te Ahgenb -mechanical feed, adjustment travel approx. 0.3 mm/double stroke -swivel 5° - 25° via hand toggle -1x chucking groove centered accessories: Box with div. grinding wheels *

Condition: good (used), Year of construction: 2004, operating hours: 16,651 h, functionality: fully functional, machine/vehicle number: M342-06204054DFA, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, feed length X-axis: 760 mm, feed length Y-axis: 510 mm, feed length Z-axis: 610 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 18 kVA, torque: 236 Nm, controller manufacturer: Hurco, controller model: Ultimax 4, workpiece length (max.): 1,020 mm, workpiece width (max.): 510 mm, workpiece height (max.): 610 mm, workpiece weight (max.): 750 kg, total height: 2,700 mm, total length: 280 mm, total width: 2,300 mm, table width: 510 mm, table height: 850 mm, table length: 1,020 mm, table load: 1,000 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 10,000 rpm, overall weight: 4,500 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, coolant supply: 6 bar, spindle nose: Steilkegel Gr. 40, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Excellent condition: Hurco VMX 30 with extremely low operating hours! For sale is a very well-maintained, vertical 3-axis machining center, a Hurco VMX 30, manufactured in 2004. The machine is in exceptionally good condition for its age. As can be easily seen from the operating hours, the machine has only been used very little by us. It was used exclusively for light-duty operation/toolmaking and was not subjected to heavy series production. The mechanical components (guideways, ball screws, and spindle) are correspondingly only slightly worn and offer high precision. The machine is equipped with the popular Ultimax 4 dual-screen control system, which is highly regarded worldwide for its extremely fast and easy dialog programming directly on the machine. Knedpszudd Tofx Ahgjb

Condition: used, Antike Fadenheftmaschine / Antique Sewing machine Gebr. Brehmer 39 Serial-No. 2742 Wunderschön verarbeitete antike Fadenheftmaschine  Beautifully crafted antique Sewing machine Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Knedewtw Dgopfx Ahgjb On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), For sale: a Gebr. Becker DVT 40 vacuum pump from the reputable German manufacturer, Becker. This unit is designed for industrial applications, including CNC machines, woodworking machines, packaging machines, vacuum gripper systems, and other installations requiring vacuum generation. The pump is complete with an electric motor and is ready for connection. The visual condition matches the photos – normal signs of wear and tear consistent with its use. It is being sold as a used unit. Technical data: Manufacturer: Gebr. Becker, Wuppertal Model: DVT 40 Year of manufacture: 1978 Serial number: K685509 Capacity: 40 m³/h Maximum vacuum: 0.5 bar Motor power: 1.5 kW Rotational speed: 1420 rpm Power supply: 220/380 V Frequency: 50 Hz Knodpszi Ha Hofx Ahgsb Protection class: IP44 Insulation class: B Power factor (cos φ): 0.8 Applications: CNC machines Machining centers Woodworking machines Vacuum packaging machines Vacuum transport systems Vacuum grippers and tables Industrial automation

Condition: good (used), Year of construction: 1973, machine/vehicle number: 73040, Embossing press Baier GEBA 1/F, installation height 90 mm, pressure capacity 800 kg, working size 10cm x 14 cm, built in 1973, machine number 73040, in good condition, immediately available Kodpfx Aovt Rpqjhgsnb If you are interested, we would be happy to inform you about other machines in our company. You are welcome to view the machine in our company by prior appointment.

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: AN-No.: 88.04.017 D, 8 very clean (reworked) Jakob Müller Frick AG looms NF42 from 1988, 1989 and 1990 from my stock. Machines run perfectly, 100% functional (refurbished) 12 shafts, without creel, with Mütrans, partly Müdata 1 piece NF 2/84mm from 1989 for 6.900€ AN-No.: 88.04.017 D with Müdata and Mütrans, 16 stocks 3 pieces NF 2/84mm overhauled from 1990 for 6.500€ each AN-No.: 90.01.704 B AN-No.: 90.01.755 A AN-No.: 90.01.229 A 1 piece NF 2/84mm overhauled from 1989 for 6.500€ AN-No.: 89.00.118 D 3 pieces NF 2/84mm refurbished from 1988 for 6.500€ each AN-No.: 88.04.244 A AN-No.: 88.02.758 A AN-No.: 88.02.758 B The machines come from a curtain band production and were originally equipped with a Z compartment. They were converted to standard compartments as part of the general overhaul. Dogonl All tension trees and press rollers have been newly vulcanized by Westland. The card rollers in the chain case are also new or newly vulcanized. The central lubrication in the chain case has been optimized by us. All machines have the first shaft free (for heavier reeds) and have 12 shafts installed. All machines are equipped with Mütrans II. Individual machines with double belt take-off (heavy fabrics) can optionally be supplied. I think possible for 4-5 machines. It is also possible to equip it with finely knurled tension trees. I think it is also possible for 4-5 machines. All needle holders are suitable for double needles. For this purpose, two additional Mütrans II can be installed upon request. The machines have been rebuilt from scratch. All bearings, shafts and bushings have been checked and replaced if necessary. All swing arms have been checked and replaced if necessary. Installed are: 1st shaft free (spacer block installed) 2nd and 3rd shaft swingarm 201 Knsdper Ix Igsfx Ahgob 4th - 6th shaft swing arm 202 7th - 9th shaft swing arm 203 10th - 12th shaft swing arm 204 13th shaft swing arm 205 All shaft springs have been checked and replaced if necessary. Nothing is porous, cracked or defective. The electrical installation has been checked, the circuit board for the thread monitoring has been checked and, if necessary, repaired or replaced. The machines are painted in RAL 6021 Müller pale green. All panels are clean and free of damage. The machines come without Müdata. 4 machines are also equipped with a crawler gear. The machines have been set up and tested. The machines come without oil, strands, slats, reeds, needles and chain links. Delivery on a Euro pallet, FOB Wuppertal

Condition: good (used), Year of construction: 1989, machine/vehicle number: AN-No.: 89.04.019 A, 5 pieces Jakob Müller Frick AG NF 42 in 5x 4/42mm with Müdata, Mütrans, without gate, super clean from Germany 2nd hand NF42 in 4/42mm from 1988-1990 AN. No.: 88.04.017 H ex.Alge, Müdata, 16 stocks very clean 7.000 Euro AN. No.: 88.04.169 D ex.Alge, Müdata, 16 stocks very clean 7.000 Euro No. 213 AN. No.: 89.04.019 B ex.Alge, Müdata, 16 shafts very clean 7.000 Euro No. 223 AN. No.: 89.04.046 B ex.Alge, Müdata, 16 shafts very clean 7.000 Euro AN. No.: 90.00.066 B ex.Alge, Müdata, 16 shafts very clean 7.000 Euro Knedpfx Ajr I Am Hshgeb

Condition: used, Turning steel grinding machine of the company Gebr. Bayer Data: 

 Knjdpfxog Tvn Se Ahgjb Manufacturer: Bayer Bros. Type: DO25
 0,55kW 0,75 HP 2800 rpm

Condition: like new (used), Year of construction: 2017, operating hours: 12,500 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine Hersteller: ARBURG Typ: 720A3200-800/70 Baujahr: 2017 Schließkraft: 320 Tonnen Holmabstand 720 x 720 mm Einbauhöhe min. /max.: 300 - 800 mm Öffnungsweg: 600 mm Schnecken DN 1: 50 mm Max. Hubvolumen: 392 cm³ Spritzteilgewicht in PS: 359 g Ksdpfx Ajv S E Dgshgjnb Schnecke DN 2: 22 mm Max. Hubvolumen: 34 cm³ Spritzteilgewicht in PS: 31 g Steuerung: Selogica Technische Ausstattung anfordern.

Year of construction: 1992, condition: good (used), Control system upgrade in 2022 to CYBELEC VisiTouch Pac Press force: 200 t Bending length: 3050 mm Frame width: 2550 mm Control system: CYBELEC VisiTouch Pac Ram stroke: 524 mm Machine weight approx.: 17,000 kg Equipment: - Control system upgrade in 2023 to CYBELEC VisiTouch Pac - Controlled axes: Y1, Y2, X, R, crowning Knjdpfx Aeim R N Hjhgsb - Hydraulic ram clamping - Hydraulic die clamping - 4-stage pneumatic die adjustment

Condition: used, Gebr. Zaugg AG Snow Plough SP200-400-5 Snow Blade Width: 4000 mm Price: €3,900 + 19% VAT. Kedjw Dwxxopfx Ahgonb For further questions, you can reach us at the following phone numbers: We speak: German, English, French, Polish, and ????? Subject to typing errors, mistakes, and prior sale.

Condition: used, Year of construction: 1991, functionality: fully functional, conveyor belt width: 500 mm, pressing force: 400 t, DGUV certified until: 07/2027, year of last overhaul: 2017, sheet thickness steel (max.): 7 mm, Edelhoff DARRW 2/400 – 400-ton pressing system with ALBA strip feeding system For sale is a complete mechanical pressing system, manufactured by Gebr. Edelhoff, type DARRW 2/400, manufactured in 06/1991, with an ALBA strip feeding system, coil unwinder, straightening unit, roller feeder, modernized Siemens SIMATIC control system, UNIDOR process monitoring, and MFP Z-conveyor, manufactured in 2025. The system is installed and can be inspected and demonstrated after prior appointment. Technical data of the press: Manufacturer: Gebr. Edelhoff Werkzeugmaschinenfabrik Knjdpfx Ahszv Ukgogjb Type: DARRW 2/400 Year of manufacture: 06/1991 Machine No.: 9131 Design: mechanical twin-column stamping press Pressing force: 400 Mp / approx. 4,000 kN Table size: 1,100 × 1,500 mm Stroke adjustment: 40–120 mm Ram adjustment: 120 mm Stroke rate: 20–80 strokes/min Motor power: 45 kW Electrical system: 380 V Control system / process monitoring The machine control system has been modernized. Equipment includes: Siemens SIMATIC control system UNIDOR process/pressing force monitoring with visualization Screen-based operation Separate main control panel Additional machine-side control panel Integration of the strip feeding system into the system control Extensive switching and control technology ALBA strip feeding system Complete strip feeding system with several ALBA components, consisting of: Coil unwinder Coil holder with spreading mandrel Hold-down / guide arms ALBA straightening unit ALBA roller feeder Separate control unit for the strip feeding system Technical data of the strip processing: Strip width: max. 500 mm Material thickness: max. 7 mm Material cross-section: max. 1,800 mm² Strip speed: up to 25 m/min 2 transport rollers 8 straightening rollers Year of manufacture of ALBA components: 1991 The strip feeding system consists of several ALBA units with separate nameplates. Part removal MFP Z-conveyor Year of manufacture: 2025 Automatic part discharge from the pressing area Modernization / overhaul The pressing system underwent extensive overhaul in the years 2017–2019. The documented costs for the overhaul amounted to approximately €92,000. In addition, the system was equipped with an MFP Z-conveyor, manufactured in 2025. Inspection The press was last inspected on 07.07.2026 according to DGUV Information 209-030. Condition / Inspection The complete system is currently installed at the production site. Inspection and demonstration under production conditions are possible after prior appointment. Dismantling, relocation, and reinstallation Upon request, in addition to the machine sale, we offer the complete technical handling of the relocation: Professional dismantling of the system Preparation for loading and transport Relocation to the new production site Reinstallation and assembly at the destination Further services according to individual agreement The scope of services can be individually agreed upon and offered according to the buyer's requirements. Financing If the buyer has sufficient creditworthiness, a financing solution can be offered or arranged for the acquisition of the system. Details, term, and conditions will be determined after individual assessment and agreement. Further technical documents and information are available upon request. Technical data provided to the best of our knowledge and according to the available machine documentation or nameplates. Subject to errors and prior sale.

Condition: good (used), Year of construction: 2017, operating hours: 12,900 h, functionality: fully functional, machine/vehicle number: 20170777, repeat accuracy: 0.03 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.06 mm, type of input current: three-phase, input voltage: 400 V, operating pressure: 4,000 bar, power of the servo motor: 37,000 W, feed length X-axis: 4,000 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 200 mm, total height: 3,500 mm, total length: 6,200 mm, total width: 3,200 mm, water pressure: 4,000 bar, control cabinet height: 1,950 mm, compressed air connection: 7 bar, pump pressure: 4,000 bar, control cabinet width: 800 mm, overall weight: 7,500 kg, product height (max.): 200 mm, input frequency: 50 Hz, power: 37 kW (50.31 HP), Equipment: safety light barrier, Waterjet cutting system Perndorfer type WSS4020, table size 4000/2000 mm, high-pressure pump BFT Ecotron with 37 kW and 4000 bar cutting pressure, 3D cutting head for contour cutting. The machine is used and in good condition, and has recently undergone an overhaul by the manufacturer. The machine can be inspected and tested at any time. Ksdpfx Ahjx H Ny Tjgonb

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: UWIA/1058/90, SAACKE Universal Tool Grinding Machine UW IA – Year of Manufacture 1990 MANUFACTURER & MODEL - Manufacturer: Gebr. SAACKE GmbH & Co. KG, Pforzheim (est. 1932) - Model: UW IA (Universal Tool Grinding Machine) - Serial Number: UWIA/1058/90 - Year of manufacture: 1990 - Electrical diagram no.: UWIA-0-161A CONDITION Very good, well-maintained overall condition. Fully functional, tested and ready for operation. Shows normal signs of use. DIGITAL DISPLAY - Heidenhain VRZ 710 (2-axis position display) - Program 212 994 04, ID no. 229 328 01 - Made in West Germany GRINDING SPINDLE DRIVE DATA - Motor type KK 5 S (3~) - 0.37 kW, 2800 rpm - 220/380 V, 1.85/1.07 A - Spindle speeds: 2100 / 3000 / 4200 / 6000 rpm (4-step) WORKPIECE SPINDLE DRIVE DATA - Georgii-Kobold motor KDD 648 P1/FW (3~) - 0.70 / 0.85 kW, 1400 / 2800 rpm - 380 V, 1.8 / 2.2 A, IP 54, tropical insulation - Made in West Germany ELECTRICAL DATA (GENERAL) - Operating voltage: 380 V (3-phase, 50 Hz) - Control voltage via transformer: 220 V - Lighting voltage: 220 V - Rated power: 1.3 kW - Rated current of the machine: 2.8 A - Circuit protection rated current: 10 A EQUIPMENT & FEATURES - Swiveling worktable ±90° - Tailstock - Workpiece spindle with separate drive - Grinding spindle head with 4 speeds Knsdpfoy Er Ahjx Ahgob - Heidenhain VRZ 710 digital display (2 axes) - Tool cabinet including approx. 15 CBN grinding wheels - Machine is mobile on 4 castors APPLICATION Classic universal tool grinding machine for grinding turning and milling tools, drills, reamers, profile tools, as well as round and flat profiles. Ideal for grinding shops, tool making, and maintenance. LOCATION & TRANSPORT Location: Central warehouse, Köck Auction House, 6178 Unterperfuss, Austria. Collection in person or freight shipping by arrangement. Transport costs on request (depending on delivery address). All information without guarantee. Subject to errors and misprints.

Condition: excellent (used), Year of construction: 2017, operating hours: 1,600 h, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine Elektrisch Hersteller: DR. BOY Typ: 100E Typ: 552 Baujahr: 2017 Schließkraft: 100 Tonnen Holmabstand (hxv) 430 x 360 mm Einbauhöhe MIN. 250 mm Schnecken DN 1: 42 mm Spritzteilgewicht 1: 157,6 g/PS Schnecken DN 2: 24 mm Spritzteilgewicht 2: 39,1 g/PS Steuerung: PROCAN ALPHA Ausstattung: 1 x Kernzug Hochschleißfeste Plastifizierungseinheit Steuerung Pneumatische Nadelverschlußdüse Trockner, Hersteller: FARRAG, Baujahr: 2016 Knsdpfx Ahezxrc Ssgeb

Condition: good (used), Year of construction: 2022, operating hours: 8,555 h, load capacity: 1,600 kg, lifting height: 11,000 mm, fuel type: electric, mast type: triplex, construction height: 4,300 mm, with camera Knedpfx Ahsz Ar S Iegob

Condition: good (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2020130, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cypcut, laser type: fiber laser, laser source manufacturer: IPG, laser power: 2,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,050 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 150 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, cutting speed: 13,000 mm/min, positioning speed: 80 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, power: 26.5 kW (36.03 HP), input voltage: 400 V, input frequency: 50 Hz, overall weight: 5,000 kg, Equipment: documentation/manual, dust extraction, fume extraction, CYPCUT - CYPTUBE, auto-center positioning, pneumatic clamping, automatic alignment device, automatic clamping device, cutting head incl. protective glass, Raytool / SWISS, laser source - IPG / Germany, software for 3D tube and profile cutting, automatic loading system for tubes and profiles, extraction unit Filtercube 2H, 4 kW, 50 m² Knodpey Efbkjfx Ahgjb