Used Gear Testing Machine for sale (106,166)

Year of construction: 2022, operating hours: 6,941 h, condition: used, machine/vehicle number: 1700846, Max. workpiece diameter: approx. 225 mm, travel distances: X-axis: max. approx. 500 mm, Z-axis: max. approx. 300 mm, control unit: REXROTH IndraControl V, 1 air filtration unit IFS E200D, year of manufacture: 2022, serial no.: 567880-3, net weight: approx. 160 kg, connected load: 400 V, 50/60 Hz, 0.85 kW, 2.5 A, 1 chiller unit RITTAL SK3334400, year of manufacture: 2022, serial no.: 2022K000051653, connected load: 3 phases, 380-415 V/50 Hz, 2.49 kW, flow rate: approx. 15 l/min, 1 coolant lubricant filtration unit FES AF2X4, 0KM/S, year of manufacture: 2022, serial no.: 38/22, tank volume: approx. 950 l, control unit: SIEMENS Simatic HMI Touch, 1 magnetic separator Dwsdpfxswv Tiqo Adujc

Condition: ready for operation (used), Year of construction: 1971, wheel width: 630 mm, table diameter: 630 mm, capacity: maximum diameter 630 mm, module 8 spare gears weight 7500 kg Dwjdpfxjxcpzge Adujc

Condition: excellent (used), Zwick/Roell Zwick/Roell 1456 RetroLine Universal Testing Machine 20 kN For sale is a high-quality universal testing machine from the renowned manufacturer ZwickRoell, model 1456 RetroLine, year 2023, with a nominal force of 20 kN. The machine was completely upgraded to state-of-the-art technology as part of the RetroLine modernization and is ready for immediate use. The machine is in very good condition, has been modernized, and complies with all current standards. It is ideally suited for tensile, compression, bending, and shear tests in research, development, and quality assurance. Technical data: Make: ZwickRoell Model: 1456 RetroLine Year of manufacture: 2023 Nominal force: 20 kN Test space dimensions: Height 900 mm, Width 420 mm Dwodew U N Rtjpfx Aduec Drive: Electromechanical spindle drive Speed range: 0.001 – 1000 mm/min (depending on model) Measurement accuracy: ± 1% according to ISO 7500-1, Class 1 (optionally 0.5) Control system: testControl II Software: testXpert III Equipment: Replacement head Cabinet (protective / soundproofing) Evaluation unit included For the ZwickRoell 1456 RetroLine with 20 kN, the approximate values (depending on configuration and equipment, e.g., cabinet, evaluation unit) are as follows: Dimensions Overall height: approx. 1.8 – 2.0 m Width: approx. 600 – 800 mm Depth: approx. 600 – 800 mm Test space (installation height/width): 900 mm × 420 mm Weight: Base machine: approx. 250 – 350 kg With cabinet and evaluation unit: up to approx. 400 – 450 kg Condition: used Scope of delivery: (see picture) - Zwick/Roell 1456 RetroLine testing machine (20 kN) - Protective / soundproofing cabinet - Interface card for force transducer - Operating and technical documentation (PDF & printed) Inspection by arrangement possible. Shipping or collection by arrangement. (Specifications and technical data subject to change and errors excepted!) Further questions can be answered by phone.

Condition: used, Year of construction: 1999, Technical details: max. wheel diameter: 200 mm gear width: 250 mm max. module: 3 min. module: 0,5 total power requirement: 45 kW Dwodpfx Adow T Tngsuoc weight of the machine ca.: 8,5 t dimensions of the machine ca.: 4,4 x 2,4 x 2,7 m Machine out of prototype production Without automation *

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Reishauer RZ 362A with approx. 74 sets of diamond discs Grinding worm dimensions: Min./Max. external diameter: 280/350 mm Width: 84/104 mm Max. module with limitations: MOD 8.0 (DP 3.2) Number of starts: with limitations up to 3 Max. usable width (shift travel): 90 mm For detailed technical information, please refer to the attached PDF file. Accessories: Dressing device Approx. 74 sets of diamond discs Grinding stones Turbo separator Dsdpfx Adsxb Ufusuewc

Condition: used, Year of construction: 1987, max. wheel diameter 150 mm max. module 5 min. module 0,5 weight of the machine ca. 10.000 kg dimensions of the machine ca. 6500 × 2700× 3600 m Dedpfx Adjw Sykrsuswc

Condition: used, Year of construction: 2007, x-travel 900 mm y-travel 300 mm z-travel 1000 mm control Siemens Sinumerik 840D max. workpiece diameter 1600 mm max. module 20 mm tip circle diameter 350 mm Milling arbour diameter 375 mm Total closing value 80 kVa weight of the machine ca. 33,5 t dimensions of the machine ca. 10,530 x 6,375 x 4,680 m Feed rate: - X-axis 1 to 3000 mm/min - Y-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/min Spindle speeds in rpm: Dwedpfx Adsw Rrb Houjc - Tool 26 to 265 - Workpiece table 0 to 8 Equipment/accessories: - M 2 motor milling head - Milling mandrels - Oil cooler - Technical documentation

Condition: used, Gear skiving machine LIEBHERR LK 200 Dwsdpfouhbq Aox Adusc

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 For sale is a high-quality materials testing machine, model Zwick/Roell Z010 TN ProLine (BT1FB010TN.D30), supplied with comprehensive equipment. This system is ideally suited for tensile, compression, bending, and component tests and is offered with original Zwick software, accessories, and safety screen. Complete system Including safety screen (CE-compliant, with electric interlock) Comprehensive accessories and software included Technical data of the testing machine: Model: Z010 TN ProLine, nominal force 10 kN Test area (W x H): 440 x 1050 mm Testing speed: 0.001 – 1000 mm/min, continuous up to nominal force High-precision guidance, very low noise emission High-resolution, maintenance-free DC motor Electrical connection adjustable in 6 voltage ranges Including interface card for force transducer (additional slot available for expansions) Expandable with options and modules Dedpfew Uifdjx Aduewc Safety – Safety screen (included in delivery): Suitable for ProLine Z005TN, Z010TN, Z020TN With electric interlock and additional manual locking Makrolon pane, 6 mm thick, pivoting (hinged left) CE-compliant Mandatory for applications with risk of operator injury Force transducer: Xforce HP force transducer, nominal force 10 kN Accuracy class: 1 from 20 N, 0.5 from 100 N (according to ISO 7500-1) Extremely good linearity (

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1719, wheel diameter: 280 mm, module thread tooth pitch (max.): 7, TECHNICAL DETAILS Dwodpfxow T R Aus Adujc Max. wheel diameter: 280 mm Max. module: 7 MACHINE DETAILS Machine weight: 13 t Operating voltage: 400 V Control voltage: 24 V DC

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, A used, overhauled Niles ZSTZ 630 C3P. Dodpfx Adjxaptkoujwc Max. gear diameter: 630 mm Gear width: 215 mm Max. module: 12 Min. module: 1 Stroke length: 225 mm Table diameter: 500 mm

Year of construction: 2025, condition: as good as new (ex-display), Stand-alone machine, max. testing force 200 kN, most modern WINDOWS software (freely programmable test sequences), over 600 finished test results, Machine price WITHOUT clamping device as the final equipment is based on your requirements: included in the price: - Machine in working order - incl. load cell 200 kN (grade 05 from 2000 - 200,000 / grade 1 from 400 - 2000 N - Warranty 24 months - Software LabTest - meets and exceeds all expectations - without clamping tool - without delivery (distance-dependent) - incl. DAkkS (DKD) calibration Optional: - Mechanical clamping device - Hydraulic clamping tool - Bending tools - Druckplatten plates - Clip-on extensometer - Probe arm extensometer - Video extensometer - Laser speckle extensometer - Climate chambers - High temperature / hot draft furnaces Dwedpfx Ajcyamwoduec ... just everything that is necessary for mechanical material testing up to the LASER TECH (optical laser speckle strain gauge for non-contact strain measurement of metal, plastic ... Ask also for other sizes. We offer new machines on the quality level of the market leader at prices of used machines.

Condition: used, Year of construction: 2008, tip circle diameter 650/800 mm workpiece length - max. 1100 mm max. module 20 (25) mm Djdow Rrbyjpfx Aduowc min. module 0,5 mm control Siemens Sinumerik 840 D total connected load 62 kVA helical angle -45 / + 120 ° weight of the machine ca. 10 t

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z0.05 Type: BT1-FRO.5TS.D14 with testXpert II V3.0 software Zwick/Roell zwicki Z0.5 TS Materials Testing Machine 0.5 kN Professional materials testing machine for tensile, compression, flexure, and component testing. Fully equipped with testControl electronics, testXpert II software, accessories, and PC workstation. Technical specifications of the testing device Model: zwicki Z0.5 TS Rated force: 0.5 kN (500 N) Max. test space height: 573 mm Test speed: 0.001 – 2000 mm/min (optionally up to 3000 mm/min) Online machine compliance correction for maximum accuracy Adaptive controller for force and strain control High precision and real-time data processing Modular expandability: 2 module slots (optionally up to 4) Clamping range flexibly adjustable Xforce P force transducer Type: Precision Rated force: 500 N Accuracy class 1 as per ISO 7500-1 from 2 N Accuracy class 0.5 from 10 N Insensitive to lateral forces, bending/torsion moments Rugged design, overloadable up to 150% of rated force Incl. calibration certificate according to ISO 7500-1 Software – testXpert II Includes basic program in German Easy operation on Windows XP/Vista (compatible with standard PCs) Integrated simulation mode (Virtual Testing Machine) Statistical analysis & tolerance monitoring Accessories Unit for tack-loop test Fmax 500 N Fixture for adhesive tapes Glass plate 25 x 30 mm (FINAT Test No. 9) incl. mount Screw specimen holder Type GRS500 PL Fmax 500 N Max. opening width 21 mm Incl. Vulkollan jaws, Ø 32 mm PC & Workstation HP DC7800 Midi Tower incl. Windows XP Pro (German) Intel Core 2 Duo E6750, 2 GB RAM, 160 GB HDD DVD drive, Gigabit Ethernet, multiple USB/serial ports 19" LCD monitor (1280 x 1024), keyboard & mouse testXpert II software preinstalled Dimensions (W x D x H): approx. 450 × 450 × 1200 mm Weight: approx. 60 kg (without PC and accessories) Condition: used Scope of delivery: (see image) Zwick/Roell zwicki Z0.5 TS materials testing machine (0.5 kN) Xforce P force transducer (500 N, incl. calibration certificate) testXpert II software (basic program, German) Dsdpfjw Uf Uzox Aduewc Accessories: tack-loop test unit, glass plate with mount, screw specimen holder GRS500 PL PC workstation with monitor, keyboard, and mouse Documentation in German (Specifications and details subject to change and errors!) We are happy to answer further questions by phone.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1130, table diameter: 250 mm, wheel diameter: 280 mm, spindle speed (max.): 1,500 rpm, module thread tooth pitch (max.): 7, TECHNICAL DETAILS Max. wheel diameter: 280 mm Max. module: 7 Table speed range: 100 rpm Table diameter: 250 mm Centre distance: 15 - 285 mm Max. axial travel: 350 mm Milling Head Drive power: 16 kW Min. number of teeth: 4 Cutter speeds: 1,500 rpm Max. cutter diameter: 160 mm Max. cutter length: 230 mm Tangential travel: 200 mm Tangential speed: 3,000 mm/min Swivel angle: ± 45° MACHINE DETAILS Approx. machine weight: 13,000 kg Dodpfx Adsw T R Ahjuswc Supply voltage: 400 V Mains frequency: 50 Hz Connected load: 35 kVA

Condition: ready for operation (used), functionality: fully functional, Manufacturer: LORENZ Model: S8/630 Wheel diameter: 630 mm Wheel width: 180 mm Max. module: 8 Serial number: 12371 Power (kW): 10 Dimensions (L×W×H mm): 3000 × 2500 × 3500 Weight (kg): 5500 Max. workpiece diameter (mm): 630 Max. module: 8 Current condition: fully functional Dwjdpfx Aexakzpodusc

Year of construction: 2025, condition: as good as new (ex-display), Max. testing force 50 kN, actual WINDOWS software (free programmable testing procedure) more than 600 ready prepared testing results (demo machine for special price) The machine state is as new. Price of machine is without clamping heads (shown on the photo) because this equipment will be delivered as option according to your requirements. Price includes: - Machine 100 % functional - incl. load cell 50 kN (quality class 0.5 from 500 - 50000 N) - warranty 24 month - software LabTest - unique performance - without clamping heads (as option) - without costs for delivery (depending on distance) - incl. Setup, training and DAkkS calibration Optional: - clamping heads - bending support - compression plates - extensometer - climatic chamber Even everything for to perform standard test procedures or according to you company requirements up to high performance testing equipment like MICRON LASER SPECKLE (optical Laser Speckle extensometer for non contact measuring of elongation for metal, plastic and other... Dwedpfx Ajptcmodusc Please ask for different machines with higher / lower forces, special equipment or applications: We offer new machines with highest quality and best price ratio at fair prices!

Year of construction: 2009, condition: used, gear hobbing diameter - external 1200 mm gear hobbing diameter - internal 1200 mm gear hobbing width -max. 260 mm control Liebherr PC-NC max. workpiece diameter 1500 mm table diameter 900 mm table bore diameter 320 mm max. table load 95 kN power capacity 30 kW coolant pump 120 l/min Axial distance between thrust spindle - table 0-820 mm Shaping spindle diameter 125 mm tool taper SK 45 DIN weight of the machine ca. 26 t dimensions of the machine ca. 8,073 x 6,183 x 4,375 m Dedpfow Rf R Uex Adujwc Strokes: - Stroke length min./max. - 0 mm / 270 mm - Stroke length adjustability - 270 mm - Stroke rate (double strokes) - 10 to 270 DH/min Equipment/accessories: - Chip conveyor - Cutting wheel holder SK 45 DIN - Cooler - Technical documentation

Condition: excellent (used), Zwick Type: BT1-FR050TH.A1K 50 kN Universal Testing Machine Zwick/Roell BT1-FR050TH.A1K Material Testing Machine – Precise Strain Gauge Testing Note: PC not included!! Highlights: - Test force: 50 kN (tension/compression) - High-precision TC-MODCSCC module for strain gauge load cells (4- & 6-wire) - Measuring range: 0.2 – 165% of nominal value, data acquisition up to 500 Hz - Maximum resolution: up to 297,000 points (at 50 Hz) - Positioning repeatability: ±10 µm - Crosshead speed: 0.0005 – 600 mm/min - Robust construction - Compact dimensions: 1,814–2,688 mm height, 936 mm width, 722 mm depth - Low noise: 59 dB(A) - Ambient conditions: +10 to +35 °C, humidity 20–90% Special features: - Ideal for research, development, or industrial material testing Dimensions & weight: Dsdsw S Hvzspfx Aduswc Load frame: - Test force (tension/compression): 50 kN - Load frame height: 1,714 mm - Overall height: 1,814 – 2,688 mm - Load frame width: 760 mm - Overall width: 936 mm - Load frame depth: 477 mm - Overall depth: 722 mm Weight: - With electronic unit: 230 kg - With typical accessories: approx. 300 kg Condition: used Scope of delivery: (see picture) - ZwickRoell BT1-FR050TH.A1K testing machine - Operating manual (Specifications are subject to change and errors excepted!) If you have any questions, we are happy to answer them by phone.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, gear diameter: 180 mm, travel distance Z-axis: 300 mm, shaft length: 640 mm, TECHNICAL DETAILS Wheel diameter - max.: 180 mm Module - max.: 4 Carriage travel axial (Z-axis): 300 mm Shaft length - max.: 490-640 mm Djdpjw T R Absfx Aduewc Y-axis travel: 33 - 193 mm MACHINE DETAILS Total power requirement: 14 kW Machine weight: 8 t Workpiece counter: 886,067 pieces

Year of construction: 2025, condition: new, Max. testing force 5 kN, actual WINDOWS software (free programmable testing procedure) more than 600 ready prepared testing results - demo machine for special price The machine state is as new. Price of machine is without clamping heads (shown on the photo) because this equipment will be delivered as option according to your requirements. Price includes: - Machine 100 % functional - incl. load cell 5 kN (quality class 0.5 from 50 - 5000 N) - warranty 24 month - software Graphwork 6 (actual) - without clamping heads (as option) - without costs for delivery (depending on distance) - incl. setup, training Optional: - clamping heads Dedpfxsdb Nfpj Aduewc - bending support - compression plates - extensometer - climatic chamber Even everything for to perform standard test procedures or according to you company requirements up to high performance testing equipment like MICRON LASER SPECKLE (optical Laser Speckle extensometer for non contact measuring of elongation for metal, plastic and other... Please ask for different machines with higher / lower forces, special equipment or applications: We offer new machines with highest quality and best price ratio at fair prices! Photos shows machine with optional equipment!

Condition: ready for operation (used), Year of construction: 2001, operating hours: 55,784 h, functionality: fully functional, machine/vehicle number: 006 904, spindle speed (max.): 3,000 rpm, gear diameter: 200 mm, travel distance X-axis: 950 mm, travel distance Z-axis: 200 mm, TECHNICAL DETAILS Workpiece diameter: 40 - 200 mm Workpiece spindle speed: 0 - 3,000 rpm Workpiece spindle torque: 45 Nm Power: 11.5 kW Center height of workpiece spindle: 1,140 mm X-axis travel: 950 mm Z-axis travel: 200 mm Minimum feed increment: 0.001 mm Control: SINUMERIK 840 D, PLC type S7 Pneumatics Required system pressure: 5–10 bar Dwjdpfx Aow T Rzwjduoc Air consumption: 0.6 Nm³/h Lubrication Central lubrication tank capacity: 6 l Lubricant: DIN CGLP, ISO VG 68 Coolant Emulsion Coolant emulsion consumption: 900 l/h MACHINE DETAILS Total power requirement: 31.3 kW Machine weight: 4,000 kg Space requirements: 1.8 x 2.2 x 1.8 m Noise level: max. 76 dB Paint finish: RAL 7035 Operating hours: 55,784 h Operating voltage: 400 V, 50 Hz Rated power: 31.3 kW Rated current: 48 A Control voltage: 24 V DC Auxiliary voltage: 230 V, 50 Hz

Year of construction: 2025, condition: as good as new (ex-display), Max. testing force 10 kN, actual WINDOWS software (free programmable testing procedure) more than 600 ready prepared testing results - demo machine for special price The machine state is as new. Price of machine is without clamping heads (shown on the photo) because this equipment will be delivered as option according to your requirements. Price includes: - Machine 100 % functional - incl. load cell 10 kN (quality class 0.5 from 100 - 10000 N) - warranty 24 month - Software LabTest - unsurpassed flexibility, meets and exceeds your expectations - without clamping heads (as option) Dodpfedb Nf Isx Adujwc - without costs for delivery (depending on distance) - incl. setup, training Optional: - clamping heads - bending support - compression plates - extensometer - climatic chamber Even everything for to perform standard test procedures or according to you company requirements up to high performance testing equipment like MICRON LASER SPECKLE (optical Laser Speckle extensometer for non contact measuring of elongation for metal, plastic and other... Please ask for different machines with higher / lower forces, special equipment or applications: We offer new machines with highest quality and best price ratio at fair prices! Photos shows machine with optional equipment!

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1443, table diameter: 180 mm, gear diameter: 200 mm, milling spindle length: 230 mm, spindle speed (max.): 750 rpm, swivel angle A-axis (min.): -45 °, swivel angle A-axis (max.): 45 °, TECHNICAL DETAILS Max. workpiece diameter: 200 mm Table diameter: 180 mm Max. table speed: 100 rpm Center distance: 15 - 400 mm Machine column Max. axial travel: 600 mm Milling head swivel device Milling head swivel angle: ± 45 degrees Milling head Drive power: 27 kW Djdpfxow T Ry Te Aduewc Max. module: 7 mm Max. cutter speed: 750 rpm Max. cutter diameter: 160 mm Max. cutter length: 230 mm Max. tangential travel: 200 mm Max. tangential speed: 3,000 mm/min Counter column Max. counter support travel: 540 mm Max. counter support rapid traverse: 15,000 mm/min Max. counter support arm force: 13 kN MACHINE DETAILS Approximate total weight: 15,000 kg Ambient temperature: 15 - 38 °C Operating voltage (tolerance +/- 10%): 400 V Operating frequency (tolerance +/- 2%): 50 Hz Control voltage: 24 V DC Hydraulics Hydraulic oil: HLP 46 Max. operating pressure: 70 bar Pump flow rate: 24 l/min Hydraulic volume in hydraulic reservoir approx.: 7 l Max. average noise level: 82 dB(A)

Year of construction: 2025, condition: as good as new (ex-display), Max. Test force 100 kN, most modern WINDOWS software (freely programmable test sequences), over 600 finished test results, machine price WITHOUT clamping device - final equipment according to your requirements Included in the price: - machine in working order - incl. load cell 100 kN (grade 05 from 1000 - 100,000 / grade 1 from 200 - 1000 N - warranty 24 months - Software LabTest - unsurpassed flexibility, complete software (!) - without clamping tool - without delivery (distance-dependent) - incl. DAkkS (DKD) calibration Optional: - mechanical clamping device - hydraulic clamping tool - bending tools Djdpfx Adjcxwq Reujwc - compression plates - clip-on extensometer - probe arm extensometer - video extensometer - laser speckle extensometer - climate chambers - high temperature furnaces ... just everything that is necessary for mechanical material testing up to the LASER TECH (optical laser speckle strain gauge for non-contact strain measurement of metal, plastic ... Ask also for other sizes. We offer new machines on the quality level of the market leader at prices of used machines.