Used Gear Honing Machine for sale (102,055)

Condition: used, functionality: fully functional, table diameter: 430 mm, The price is for both machines – only sold as a set. Make: STAEHELY SH 500 Accessories: change gears, arbors, and one machine with tangential milling head (see photos)!!!!! Table diameter = 430 mm Max. gear diameter = 500 mm Gear width = 240 mm Module = 6 Dcjdpfx Aoxfub Dof Ion

Condition: excellent (used), Year of construction: 1979, Machine can be inspected on site Dodowbvwnjpfx Af Ijcn

Condition: used, Technical details: center height over bed: 260 mm workpiece dia. over bed: 500 mm workpiece dia. over support: 250 mm hobbing length: 2000 mm number of teeth: 2 - 50 Dodpfx Asv U T Dyef Iecn feed:: 0,023 - 5,17 / mm/min module max. : 8 / 12 spindle bore diameter: 102 mm workpiece rpm : 18 - 224 U/min tailstock quill adjustment: 100 mm total power requirement: 9,5 kW weight of the machine ca.: 5,2 t dimension machine xH: 3,6 x 2,1 x 2,0 m

Condition: good (used), Year of construction: 2006, functionality: fully functional, PRAWEMA 2005 204 HS-W Dodpfx Aevm Efasf Iocn PRAWEMA 2006 SYNCHROFINE 205 HS

Condition: new, MIOTAL® GB 50 VG geared pillar drilling machine with thread cutting device Technical data: Drilling capacity: 50 mm tool holder: MK 4 quill stroke: 200 mm tapping capacity: M33 Dedpfxopxmlij Af Iscn face milling cutter: 100 mm end mill: 25 mm throat depth: 340 mm table size: 600 x 600 mm column diameter: 180 mm number of T-slots: 2 T-slot size: 22 x 35 mm motor power: 3 kW Weight, approx.: 750 kg Equipment: - Coolant device - Automatic spindle feed - Thread cutting device - LED machine light - Height adjustable protective cover - Table rotatable - Manual fine feed - Limit switch protected spindle

Condition: good (used), Year of construction: 2003, max. ram stroke 100 mm max. module 8 table diameter 400 mm workpiece diameter 600 mm strokes per minute 80-1200 Hübe/min Feed radial axis from - to 1 - 3750 mm/min angle adjustable from - to - 0,5 / + 0,5 Grad Dcjdpfx Aovfwuqsf Ien Accessories: - Various tool holders - Various clamping devices - Documentation

Condition: used, honing diameter 99999 mm stroke 99999 mm throat 99999 mm Used panel of a NAGEL MSU2 No warranty Dcodpfx Asv Twgiof Ijn

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Habrama Rack Milling Machine ZFM Compact 2200 Manufacturer: Habrama Type: ZFM Compact 2200 Control unit: Siemens 840D Sinumerik Year of construction: 2025 Travel distances: X-axis longitudinal: 2250 mm Y-axis transverse: 430 mm Z-axis vertical: 310 mm C-axis: +30 degrees / -30 degrees The basic equipment includes: - Partial enclosure - Direct position measuring systems for the X and Z axes - Chip conveyor - Vibration damping mounting elements Dcedowngg Hepfx Af Ijn - Coolant fine filter system - One set of milling arbors Ø50 Weight: 22,000 kg Complete documentation is available. Inspection under power can be arranged at short notice. For further questions, we are at your disposal. Price, ex works here plus VAT Condition: good - ready for demonstration Delivery: ex stock - as inspected Payment: net upon receipt of invoice Prior sale and errors excepted. We kindly ask for your order. More machines and equipment available from stock – Please inquire. We look forward to hearing from you.

Condition: used, Year of construction: 1997, Technical details: max. module: 7 Dcjdpfx Afoxb Arpe Isn weight of the machine ca.: 5 t worm grinding diameter: 280-350 mm width of grinding worm: 84-104 mm min. number of teeth: 6 max. number of teeth: 600 max. top circle diameter: 360 mm max. workpiece weight: 60 kg without filter *

Year of construction: 1970, condition: used, Cordia S26 Gear Drilling Machine Drilling capacity in steel (diameter) 26 mm throat 280 mm Drilling stroke 100 mm Total power requirement 1000 Watt , 380 V Machine weight approx. Dcedpfxem Sg Rks Af Isn 355 kg Space requirement approx. 1060 x 1000 x 2100 incl. base plate mm Height max .500 mm Table surface 330 x 270 mm Number of spindle rotation 6 steps spindle speeds 95 - 1450 rpm Control conventional

Condition: used, Year of construction: 2011, machine/vehicle number: 25621, workpiece diameter (max.): 360 mm, Equipped with: Gear Spindle Runout: -Radial (Bore): .00005 -Axial (Face): .00005 Pinion Spindle Runout: -Radial (Bore): .00005 Axial (Face): .00005 Axis Repeatability: -X: .0001 -Y: .0001 -Z: .0001 Axis Lost Motion: -X: .00005 -Y: .00005 -Z: .00005 Fanuc 160I MB Control Base Work Holding Draw Bars Automatic Doors Djdpfx Asxdfanef Iecn Spindle Chiller Transformer Hydraulic System Festo Pneumatics Automation Interface Available SPECIFICATIONS: Maximum Gear Outside Diameter: 360 mm (14.2") Maximum Pinion Outside Diameter: 340 mm (13.4") Maximum Pinion Drive Speed: 3000 rpm Maximum Gear Drive Speed: 1500 rpm Offset Vertical 150 mm ( 5.9") Pinion Cone Range: (90) (135-350) (70) (146-438)* (110) (51-343)* Gear Cone Range: (90) (65-280) (70) (78-306)* (110) (56-284)* Standard Testing Torque Load 2 to 90 Nm (1.5 to 66 ft-lb). Parallel Axis - face-to-face 147 - 362 - Center Distance -7 - 250 Pinion Spindle Bore 39T - Diameter 99.2 mm (3.9") - Depth 419 mm (16.5") Gear Spindle Bore 39T - Diameter 99.2 mm (3.9") - Depth 250 mm (9.8") Floor Space (width & length) 2100 x 2550 mm (82.7 x 100.4") Height (to top of stack light) 2750 mm (108.3") Weight (base machine) 9100 Kg (20062 lbs)

Condition: good (used), Year of construction: 2002, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the Dedpfxew N S E Ae Af Ijcn gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: used, honing diameter 99999 mm stroke 99999 mm Dcsdpfxjv Tqqhe Af Ion throat 99999 mm Used Treiber from a Nagel MSU2 control No warranty

Condition: good (used), Max. diameter: 1250mm; Module: 14 Dedpfx Asxdi Aasf Iocn

Condition: good (used), NAGEL Horizontal Honing Machine with Stroke Automation HHM 90A - Honing range: 1.9-100 mm diameter - Spindle motor: 0.55 kW - Spindle speed: 95-2300 rpm - Stroke length: 0-150 mm (stepless) - Stroke frequency: 80-400 strokes/min (stepless) - Stroke adjustment range: 250 mm Dcodpfx Aoxdfhlsf Isn - Retract stroke for workpiece change: 100 mm - Net weight: 420 kg Good condition, fully functional, can be inspected and tested on site. Shipping available internationally. Inspection: As a general note, to avoid misunderstandings, I recommend inspecting and testing the machine under power before purchase. Please ask any questions beforehand to prevent uncertainties. For general questions or to arrange an inspection appointment, I am always reachable at the phone number listed above or below. Subject to prior sale and errors in description. VAT will be shown separately on my invoices. Shipment via freight forwarding.

Condition: ready for operation (used), Year of construction: 1966, functionality: fully functional, machine/vehicle number: 8588, overall weight: 400 kg, rotational speed (min.): 3,120 rpm, rotational speed (max.): 3,860 rpm, height adjustment type: mechanical, grinding diameter: 200 mm, disc diameter: 150 mm, distance table to spindle center: 400 mm, Tool Grinding Machine Used Cutting Wheel Sharpening Machine, Grinding Machine, Cutting Wheel Sharpener Lorenz Type MS 80, year 1966, without coolant system, particularly suitable for sharpening rack cutter wheels (cutting wheels), maximum rack wheel diameter to be ground approx. 200 mm, maximum stroke of the grinding spindle carriage approx. 50 mm, clamping table surface approx. 600 x 245 mm, manual longitudinal table travel 250 mm, manual vertical table adjustment 275 mm, with coarse and fine feed, max. usable grinding wheel diameter 150 mm. Dcsdjffybgepfx Af Ien Includes the MSV 75 cutting wheel sharpening device for producing a conical surface grind on straight-cut cutter wheels. Driven by a worm gear motor. Supplied with operating manual for this high-performance special machine for sharpening cutter wheels. Cutting wheel offered at a special price. Viewing under power is possible by prior appointment. Price on request / Special price All technical specifications are subject to errors/typing mistakes. Sale is strictly limited to EU countries.

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Dcodpfjrtrzdsx Af Ion Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: good (used), Year of construction: 2004, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm Dcodjul Efmjpfx Af Ien diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: used, honing diameter 99999 mm stroke 99999 mm throat 99999 mm Dodpsv Tqquofx Af Iecn Used without warranty

Condition: good (used), Year of construction: 2007, max. wheel diameter 500 mm gear width 200-400 mm module 12 Djdpfx Asvr Hf Eef Ijcn turning speeds 0-3250 U/min bracke pressure bis max. 95 Nm inner taper Konus #39 Control Fanuc 16 total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm.

Condition: used, Year of construction: 2000, honing diameter 45 mm stroke 1000 mm 4 spindle honing machine for guns Honing area according to the manufacturer: Diameter 5-45mm Maximum Honing Length 750mm Dcodpfx Afsxddq Ee Ion Accessories: Honing tools for diameter: -10mm -12,3mm -13,3mm -21,1mm

Condition: used, Year of construction: 2007, control Siemens Sinumerik 840 D weight 57.000 kg voltage 400 V Gleason PFAUTER CNC gear hobbing machine P 2400/2800 for gear cutting of cylindrical and worm gears as well as all other regularly occurring rollable profiles and shapes on the cylindrical workpiece circumference. Large gear hobbing machines from Gleason offer maximum productivity for roughing and finishing cylindrical gears for many industries: wind turbines, industrial gearboxes, mining and shipbuilding, gear machining and many more. The power range of the drive takes future tool developments into account. Of course, the gear hobbing head drive is also backlash-free. These machines are particularly well suited for use with state-of-the-art, cutting materials, regardless of whether dry or wet machining is preferred. The machine can be used for dry or wet machining and is also equipped with the appropriate chip conveyor for both machining methods. The machine is equipped with an internal profile milling head as a motorised Dedpfxjwzyp Is Af Ijcn milling head. --> Working range and technical data Nominal workpiece diameter: 2.400 mm --> Largest millable diameter approx.: 2.800 mm --> Smallest/largest distance between cutter and workpiece axis: 100/1.200 mm --> Largest axial slide travel (special design): 1.300 mm --> Largest clampable cutter (internal milling head): --> Diameter max: 440 mm --> Max. cutter width: 90 mm --> Swivel range of the internal profile milling head/vertical axis: +/- 15° --> Milling mandrel taper: HSK-B160 --> Maximum milling cutter travel: 300 mm --> Table diameter: 2.500 mm --> Part wheel diameter: 2.200 mm --> Table bore --> Diameter: 800 mm --> Depth: 875 mm --> Maximum table load approx.: 40.000 kg --> Max. feed and rapid traverse speeds: --> axial (Z-axis): 4.000 mm/min --> radial (X-axis): 3.000 mm/min --> tangential (Y-axis): 3.000 mm/min --> Milling cutter cooling lubrication device/electric centrifugal pump: approx. 150 l/min --> Increased drop height of magnetic chip conveyor: 1,600 mm --> Increased main stand: 1,300 mm axial slide travel --> Internal profile milling head as motor milling head instead of standard motor milling head --> Max. millable profile depth in steel with approx. 600 N/mm² strength: approx. 65 mm --> Infinitely variable milling speed: 50 - 150 min?¹ --> Max. milling cutter diameter: 440 mm --> Min. milling cutter base circle diameter: 310 mm --> Max. milling cutter width: 90 mm --> Min. internal diameter at 0° bevel angle: 800 mm+) --> Max. workpiece height at 0° bevel angle: 600 mm --> Max. workpiece ring thickness (including clamping device): 500 mm

Condition: used, Year of construction: 2010, honing diameter 54 mm stroke 99999 mm centre height 9999 mm Control FANUC CNC Ball and spherical honing machine Dcodpfxevk Nkue Af Ien

Condition: used, Year of construction: 2008, max. wheel diameter 900 mm gear width 450 mm Djdpfewzmp Uex Af Iecn max. module 10 min. module 1 min. number of teeth 8 milling cutter dia. x width 192 x 215 mm distance table / middle of spindle 910 / 630 mm distance bet. workpiece spdl. ctr-milling sp. 50 / 550 shifting 200 mm swivelling of milling head 240 Grad table diameter 700 mm table bore diameter 160 mm milling head speed 25 - 160 U/min total power requirement 21 kW change gears, arbors, shifting, 2-cut circle, chip conveyor, outer steady # with crowning device # in excellent working condition

Condition: used, Year of construction: 1975, honing diameter 250 mm stroke 99999 mm throat 99999 mm Seems to be manzfactured by NAGEL Dsdpewlvkpofx Af Iecn Hondurchmesser app YOM app because of no plate