Used Gear Honing Machine for sale (93,239)

Condition: ready for operation (used), Year of construction: 1980, Working diameter min./max.: 25mm/250mm, max. honing length: 800mm, speed: 50U-250U/min, vertical stroke: 40mm-1000mm, stroke speed: 12m/min, throat depth: 870mm, tool holder: MK4, table: fixed table. Machine dimensions X/Y/Z: approx. 2650mm/1400mm/3000mm, weight: approx. 2000kg. Including coolant system with 100l tank. Documentation available. On-site inspection is possible. Expected to be available from December 2025. Knedpfjwt Tk Asx Adqed

Condition: ready for operation (used), Year of construction: 2008, Immediately available ex-stock: Vertical honing machine Manufacturer: Delapena Knedpjxxuwxefx Adqsd Model: 276/403 Honing diameter: 25.4 – 368.3 mm Honing length up to max. 812 mm Infinitely variable spindle speed: 40 – 250 rpm Infinitely variable stroke speed up to 18 m/min Complete set of accessories Weight: 3 tons Offered at a price of EUR 6,000.— plus VAT ex location

Condition: used, Year of construction: 2005, Type Honanlage Control Nagel In our opinion, the machine is in good used condition and can be inspected under power by appointment. Kodpfxexwdxio Adqjnd Two machines are available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 203214, workpiece weight (max.): 2 kg, spindle speed (max.): 3,700 rpm, workpiece diameter (max.): 150 mm, empty load weight: 1,579 kg, TECHNICAL DETAILS Workpiece diameter: 8 to 150 mm Max. workpiece weight: 2 kg Spindle speed range: 250 to 3,700 rpm Standard speed range: 20 to 1,000 rpm Stroke speed range: 33 to 500 strokes/min Tools Krossgrinding tools: 5.46 to 32 mm TurboHone tools: 3.81 to 32 mm Connecting rod tools: 53.8 to 63.8 mm Larger tools: 25.4 to 101.6 mm Knsdpfsxxkfxsx Adqjd MACHINE DETAILS Coolant system Pump motor power: 0.18 kW Coolant pump: 5.6 l/min Coolant capacity: 132 l Air pressure requirements: 566 l/min at 4.48 bar Recommended air pressure: 5.52 bar Temperature range: 0 to 35 °C Noise emissions: < 71 dB (A) continuous, < 75 dB (A) peak Dimensions & Weight Dimensions (L x W x H): 2,946 x 2,971 x 1,829 mm Net weight: 1,579 kg Required footprint thickness: Minimum 150 mm EQUIPMENT Automatic setup (spindle speed, stroke speed, stroke length, feed rate, spark-out) Automatic finish machining Machine operating modes: Automatic, Manual Series production Single-item production Optional clamping

Condition: good (used), Year of construction: 2000, Ref. -No.: 10609 Manufacturer: GLEASON - PFAUTER Type: P 2400 G Year of construction: 2000 Type of control: CNC Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine length: 1100 mm Machine width: 6585 mm Machine Height: 5200 mm Max. Workpiece Diameter: 2640 mm Weight Of The Machine Ca.: 23 t Knsdpfexvw R Njx Adqsd Grinding Wheel Diameter: 400 mm Spindle Speeds (Infinitely Variable): 600 bis 6000 mm Grinding Wheel Width: 80 mm X-Axis: 1200 mm Y-Axis: 300 mm Z-Axis: 1000 mm Z2 - axis: 150 mm Sandable profile depth: 80 mm Workpiece table: 0 bis 5 1 / min Feed rate X-axis: 3000 mm Feed rate Y-axis: 5000 mm Z-axis feed rate: 6000 mm Further information: - Fully automatic centering device - Oil mist separation - Gear tooth measurement - “Profile grinding” software package - Error diagnosis - IFK2 internal milling head - Milling mandrel with spacer discs - Chip conveyor - Oil mist extraction - Technical documentation

Condition: good (used), Year of construction: 1975, max. wheel diameter 630 mm gear width 425 mm table hole 125 mm clamping table 550 mm max. module 10 axial-feeds 0,40 - 6,80 mm/U radial feeds 0,10 - 1,76 mm/U dist. cutter spindle - workpiece spindle 50 - 425 mm no. of teeth min. 8 milling cutter dia. x width 192 / 215 mm shifting 200 mm main drive motor 7,5 kW total power requirement 22,5 kVa weight of the machine ca. 8,2 t Machine equipment: - Universal milling head with tangential displacement - Pressure reducing valve for counterholder - Magnetic chip transport Kedpfjw A Am Ssx Adqsnd --> Working range Largest module to be milled (in steel 600 N/mm²): 10 mm --> Straight gear teeth: --> Largest workpiece diameter: 630 mm --> Largest axial slide travel (Z-axis): 425 mm --> Smallest number of teeth to be milled: 8 --> Dimensions Diameter of workpiece table: 550 mm --> Diameter of table bore: 125 mm --> Diameter of workpiece mandrel: 36 mm --> Largest milling cutter that can be clamped: --> Diameter: 192 mm --> Width: 220 mm --> Diameter of milling cutter mandrels: 32 mm --> Centre distance between milling cutter and workpiece: --> Maximum distance: 425 mm --> Minimum distance: 50 mm --> Drive taper for cutter mandrels: Morse taper 5 --> Maximum cutter displacement: 200 mm --> Speeds and feeds Cutter speeds: 45 - 280 rpm --> Axial feed (Z axis): 0.40 - 6.30 mm/rev --> Radial feed (X axis): 0.10 - 1.60 mm/rev --> Tangential feed (Y axis): 0.14 - 2.24 mm/rev Translated with (free version)

Condition: used, Year of construction: 1999, Technical details: max. wheel diameter: 5 - 260 mm gear width: 400 mm max. module: 15 min. module: 0,5 gear hobbing diameter - internal: 30 mm max. helix angle: > 85 ° Aussenverz. max. helix angle: > 45° Innenverz. Testing Range vertical: 400 mm dist. between centers: 5 - 600 mm Kodpoqvcnnsfx Adqend table diameter: 260 mm max. table load: 100 kg speeds: 30 1/min total power requirement: 1,6 kVA weight of the machine ca.: 900 kg dimensions of the machine ca.: 200 x 1300 x 2150 mm CNC Gear Tester in good condition, out of OEM Test Lab. For measuring of spur and helical toothing, additional of rotationally symetric parts as true running, coaxiality, axial runout, etc. with tool changer ( 4 nos.) *

Condition: excellent (used), Year of construction: 2007, max. wheel diameter 400 mm weight of the machine ca. 4 t Kodpfoxvdryox Adqsnd

Condition: excellent (used), I am selling this machine, connected, can be tested. Knjdpfx Adsv Nqppeqjd Max. workpiece diameter ..... 1600 mm Module ..... 16 - Power of the main electric motor ..... 12 kW Dimensions l x w x h ..... 4300 x 2000 x 3170 mm Machine weight ..... 18500 kg Can send a video of the machine, via whatsapp.

Condition: used, Year of construction: 1988, functionality: unexamined, Equipment: documentation/manual, Good morning, I have for sale a Fellows gear shaping machine, Tos OHA 32A. Complete technical and electrical documentation available. Price: 11,000 EUR Kedpsxwp Ngsfx Adqjnd Technical specifications: Machine type: OHA 32 A Manufacturer: TOS Čelákovice Year of manufacture: 1987/1988 Workpiece diameter for external gearing: 30 – 320 mm Maximum basic diameter for internal gearing: 300 mm Maximum outside diameter for internal gearing: 400 mm Maximum gear module: 6 Maximum width of shaped gear: 70 mm Number of gear teeth: 12–300 Maximum workpiece weight with clamp: 150 kg Distance from tool support surface on the slide to table surface: min. 30 mm, max. 310 mm Motor power: As per technical data sheet Machine dimensions (L x W): 2150 x 1420 mm, machine height: 1980 mm Machine weight: 4300 kg Electrical equipment: Total connected power 15 kVA

Condition: excellent (used), Year of construction: 2011, operating hours: 49,000 h, functionality: fully functional, KLINGELNBERG OERLIKON G 27 – Bevel Gear Grinding Machine Manufacturer: KLINGELNBERG AG Brand: KLINGELNBERG OERLIKON Series / Model: G 27 Year of Manufacture: 2012 Type: Bevel Gear Grinding Machine Condition: Excellent – all tolerances within manufacturer's specifications Location: Bavaria, Germany Nearest Airport: Munich Application Areas - Spiral and hypoid bevel gears - Planetary gears - Passenger car and commercial vehicle transmissions - Agricultural and forklift drive systems - Special gear units - Helicopter gearboxes - ...and many other precision applications Technical Specifications - Max. gear diameter: 300 mm - Max. module: 8 - Min. module: 0.7 - CNC control: Siemens Sinumerik 840D Solution Line Kjdpfx Aexuwmnedqjnd - Software: KIMoS5 (Klingelnberg Integrated Manufacturing of Spiral Bevel Gears) - Min./max. bevel angle: −90° / +90° - Workpiece spindle bore: 127 mm - Grinding wheel diameter: 50 – 230 mm - Grinding spindle speed (stepless): up to 7,500 rpm - Workpiece spindle speed: up to 700 rpm - Connected load: 146 kW - Machine weight: approx. 21 t - Machine dimensions (L × W × H): approx. 9.5 × 3.6 × 3.1 m - Integrated probe unit at grinding head - External grinding spindle cooling - ELBARON oil mist extraction system (integrated) - HOFFMANN coolant filtration system

Condition: used, max. wheel diameter 300 mm gear width 200 mm max. module 12 Knsdpfx Adsxu Nttsqjd min. module 0,5 total power requirement 2 kW weight of the machine ca. 1 t dimensions of the machine ca. 0,8 x 1,2 x 1,5 m

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 40-160 mm gear width: 90 mm max. module: 3,5 min. module: 1,25 Kodoxu Dccjpfx Adqond weight of the machine ca.: 5,6 t

Condition: ready for operation (used), TOS Gear Hobbing Machine FO16 Maximum wheel diameter: 1,600 mm Gear width: 560 mm Maximum module: 16 Maximum workpiece weight: 7,000 kg Table surface area: 1,350 mm Turning speed range: 16–80 rpm Feeds – axial: 0.05–1.5 mm/min Feeds – radial: 0.25–6 mm/min Knedpfoxwl R Tox Adqed Feeds – tangential: 0.13–4 mm/min Electrics – voltage/frequency: 380/50 V/Hz Total power requirement: 12 kW Machine weight approx.: 18.5 t Machine dimensions approx.: 4.3 x 2.0 x 3.2 m The machine includes one additional head, change gears, and arbors. Video of the machine under power available.

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, For sale: this gear hobbing machine. Wired and ready for testing. Comes with extensive accessories. Technical specifications: Maximum gear diameter: 7,100 mm Gear width: 1,500 mm Maximum module: 45 Table diameter: 4,000 mm Hob diameter x width: 400 x 500 mm Maximum helix angle: 45 degrees Planing cutter diameter: 500 mm Kodpfx Aoxwlthodqond Planing cutter speed: 9–63 rpm Total power consumption: 47 kW Machine weight: 160,000 kg

Year of construction: 2015, condition: excellent (used), Polygon and surface machining, gear and spline shaft machining, gear tooth pointing, shift stop machining, chamfering and deburring, SCUDDING Kodpfjxupg Tox Adqend See document

Condition: excellent (used), Year of construction: 2004, operating hours: 74,322 h, functionality: fully functional, Model Klingelnberg C 27 – CNC Bevel Gear Milling Machine Maximum workpiece diameter: 270 mm Standard module: 1 – 4 mm (continuous) / 1 – 6 mm (single piece process) Maximum tooth width: approx. 55 mm Spiral angle: 0 – 60° Number of teeth: 6 – 180 Maximum transmission ratio: 1 : 10 Minimum transmission ratio: 1 : 1 Cutter head radius: 39 – 105 mm (3" – 7.5") Number of cutter groups (Oerlikon): 5 – 19 A-axis (cutter head spindle) Mounting diameter, Gleason No. 14 – 1:24 Ø 58.34 mm Adapter, Oerlikon short taper 1:4 Ø 130 mm Spindle speed: 1000 rpm B-axis (workpiece spindle) Mounting diameter, Oerlikon external taper 1:4 Ø 140 mm Internal taper No. 39 – 1:16 Ø 99.21 mm Workpiece spindle bore: 90 mm Workpiece spindle speed: 1000 rpm C-axis Swivel range: ± 90° X-axis (milling depth axis) Travel: 350 mm Maximum speed: 10 m/min Y-axis (workpiece positioning axis) Travel: 665 mm Maximum speed: 10 m/min Z-axis (tool positioning axis) Travel: ± 120 mm Maximum speed: 10 m/min Machine equipment: CNC control Siemens 840D or Fanuc 160iT3 Electrical equipment: Oerlikon standard 3 x 400 V 50 Hz, control 24 V DC Work area lighting Control cabinet cooler Swiveling control panel Hydraulic system Impulse lubrication Automatic workpiece clamping with adjustable drawbar Clamping stroke monitoring Foot switch for workpiece clamping Knjdpfx Adoxur U Tsqjd Standard tool kit Electrical data: Total connected load: 40 kVA Voltage: 3 x 400 V ±10 % Frequency: 50 Hz ±1 % Protection: 80 A slow blow Power interruption: max. 3 ms Voltage dip: max. 20 % for 20 ms Voltage peaks: max. 200 % of nominal voltage for 1.5 ms Harmonic content: max. 10 % Line symmetry: max. 2 % voltage difference between two phases Control voltage: 24 V DC Compressed air supply: Pressure: min. 7 bar – max. 10 bar Consumption: 100 l/min Pressure dew point: max. 10 °C Temperature range: 10 °C – 40 °C Particle size: max. 40 µm Axes of deburring and milling unit: Q milling axis V1 deburrer infeed axis U deburrer positioning axis

Year of construction: 2014, condition: used, inclination 0,5 - 6,3 ° Knsdpsxukrwefx Adqed speed 700 m/min stroke 100 mm max. diameter 270 mm pitch angle +/- 45 ° Cutter Spindle Diameter 68,23 mm table height over floor 930 mm weight of the machine ca. 3 t dimensions of the machine ca. 1,35 x 1,75 x 2,2 m

Condition: excellent (used), machine/vehicle number: DCL1754, Specifications Manufacturer LORENZ Model S8/630 Condition Used Kodjxv S A Hspfx Adqond Serial Number 10330 Stock Number DCL1754 Module 8 Max diameter 630 mm Working stroke 200 mm Description Equipment: Instruction manual/Electrical Diagrams change gears Acam

Condition: ready for operation (used), functionality: fully functional, wheel width: 600 mm, table diameter: 750 mm, total length: 3,300 mm, wheel diameter: 1,000 mm, total height: 2,300 mm, spindle speed (max.): 215 rpm, overall weight: 13,500 kg, For sale: Well-maintained Donini A105 gear hobbing machine. The machine is used but in good condition. We are selling it because we do not use it enough. The guideways are like new, and it machines very precisely. It has low operating hours. The scope of delivery includes all change gears, arbors for cutters, and all workpiece holding arbors. The machine is relatively compact: Without control panel = Approx. width 3300mm, depth 1400mm, height 2300mm. The machine weighs 13,500 kg. The price is ex works (loaded at yard). We would remove the machine ourselves. Loading onto the truck is the buyer’s responsibility. However, we also have local contacts who can assist. Knedpfsxv Sw Rjx Adqod

Condition: excellent (used), Diameter: 800mm Module: 10 Kedjxv Sbpspfx Adqsnd

Condition: used, Year of construction: 2003, Control BWO tip circle diameter max. 700 mm root circle diameter min. 50 mm height of profile max. 35 mm number of spindle speeds 0 - 5400 min-1 table load capacity max. 500 kg Equipment: BWO control system All axes CNC controlled Oil mist extraction Coolant cleaning system with cooling unit Kjdpfx Ajxt Ur Sjdqond Dittel balancing unit Accessories: Grinding wheels Ø400mm incl. Grinding wheel flanges 1 diamond dressing roller, manufacturer Dr. Kaiser, Ø160mm Counterholder tip

Condition: used, Year of construction: 2008, max. wheel diameter 300 mm max. module 8 min. module 0,7 Control SINUMERIK 840 D Kjdevxww Sspfx Adqond min/max. pitch cone angle - 90 / + 90 ° workpiece spindle - bore 127 mm grinding wheel diameter 50 - 230 mm spindle speeds (infinitely variable) 7.500 U/min work piece spindle speed 700 U/min total power requirement 146 kW weight of the machine ca. 21 t dimensions of the machine ca. 9,5 x 3,6 x 3,1 m Measuring probefor tooth gap(integrated on the grinding head) External grinding spindle cooling system ELBARON oil mist extraction (integrated in the machine) Hoffmann coolant filter system Was used for the serial production of spiral-toothed ring gears No clamping devices No grinding wheels / grinding wheel flanges No dressing wheels

Condition: used, Year of construction: 1999, ❗Honing Machine / Cross-Honing Machine Sunnen Eclipse EC-3500-CGM-27 ❗ Year of manufacture: 1999 Machine No.: 3X1-1926 Condition: Used, untested Delivery terms: Free loaded on truck – unpacked Location: 82216 Maisach Availability: Immediate – upon agreement Payment terms: Advance payment – by bank transfer Internal no.: PHY1 Technical specifications: Manual stroke diameter range: 1.5 – 165 mm Automatic stroke diameter range: 1.5 – 102 mm Stroke length range: 6.0 – 170 mm Spindle speeds: 200 – 3000 rpm Stroke rates: 60 – 500 strokes/min Spindle motor power: 4.1 kW Stroke motor power: 1.1 kW Compressed air requirement: 5.5 bar 400 V / 50 Hz Spindle bearings renewed in 2015 Frequency converter replaced in 2024 Spindle motor fan replaced in 2025 Further technical data – see PDF attachment Notes: Stop fingers missing (see photo) Operating hour counter defective Tool type selector switch defective Light curtain defective (bypassed in the control cabinet) Despite the above-mentioned defects, the machine was in regular operation at a specialist company. Scope of delivery: Available documentation No additional accessories Dimensions & weight: Installation dimensions (L x W x H) approx.: 1600 x 1200 x 1900 mm Weight approx.: 900 kg If you have any questions or wish to arrange a viewing, please do not hesitate to contact us. ⚠️Also take a look at our other listings.⚠️ Additional notes: We expressly recommend collection by direct shipment (haulage company). Kjdpfsxv Dmqox Adqsnd The item is sold without any warranty of any kind. Technical specifications provided without obligation. Subject to prior sale. ❗Sale exclusively to business customers❗

Condition: good (used), Year of construction: 1982, max. wheel diameter 600 mm gear width 500 mm max. module 15 min. module 1 total power requirement 2 kW weight of the machine ca. 2 t dimensions of the machine ca. 2x1,5x2 m The rounding of the teeth is obtained by coordinating alternative movement of the cutter and rotary movement of the piece. The alternative movement of the cutter is obtained by rotating a cam, shaped in order to obtain radius or cusp rounding. A series of 4 cams allows to work modululus from 1 and 16 included. An regulation device allows change the modulus between the minimum and maximum value of every cam. The rotation of the piece is controlled by a three-stage gear wheel which forms the dividing system. The piece lock and the movement of the rapid entry of the cutter to the piece is controlled by pneumatic servo devices. The practicality and rapidity of the equipment, as well as the wide range of profiles available on the cams and the ability to process internal gears, make the machine a universal machine suitable for machining small and large series. --> technical features Max module: 15 --> Max diameter: 600 mm --> Spindle/head speed: 1450 - 2100 - 2800 rpm --> Production output teeth per minute: 35 - 50 - 75 --> Motor output spindle: 2800 rpm - 1.5 HP --> Motor power piece rotation (self-braking): 1.5 HP --> Motor power automatic (self-braking): 0.35 HP --> Motor power cooling system: 0.25 HP --> Dimensions: 2000 x 1500 mm Knodpfx Ajwftuxsdqsd --> Total weight: 2000 kg Accessories Cam x 5 Indexing wheels Tools Serial no. 152/0589/94 Machine with full enclosure Counter support