Used Gear Grinder for sale (8,559)

Condition: used, TECHNICAL DETAILS - Grinding length : 120 [mm] - Center height : 102 [mm] - Strokes (X/Z) : 450 x 200 [mm] - Max speeds (X/Z) : 12 [m/min] SPINDLE SUPPORT Lodeuhbmqjpfx Apmshk - Spindle number : 2 WORKPIECE HEADSTOCK - Max. workhead speeds : 1500 [rpm] - Spindle clearance : 28.6 [mm] - Power : 1.4 [kW] - Mounting tape r: A2.4/CM5 - Torque : 150 [Nm] - Manual B axis angle : +/- 2 [°] - C axis : 0.0001 [°] POWER SUPPLY - Installed power: 34 [kVA] DIMENSIONS - Floor dimensions : 3600 x 2800 [mm] - Machine weight : 2600 [kg] MACHINE HOURS - Number of hours under power : 26781 [h] EQUIPMENT - Fanuc Oi-TD control - Spindle centre coolant - Cooling unit for spindle cooling - Loading robot - 2 spindles available : 59.600 - 41.600 [rpm] - Dressing turbine

Condition: used, TECHNICAL DETAILS - grinding diameter : 0.1 – 10 [mm] - total length : 10 [mm] - working stroke : 0-10 [mm] - working grinding wheel dimensions : 150 x 50 x 50 [mm] - driving grinding wheel dimensions : 100 x 50 x 40 [mm] - driving grinding wheel diameter : 100 [mm] - working grinding wheel speed : 4500 [Rpm] - driving grinding wheel speed : 20-50 [Rpm] Lodjuhb N Sjpfx Apmohk - power : 6 [kW] - min. pressure : 5.6 [bar] - dimensions : 1300 x 1100 [mm] - weight : 700 [kg]

Condition: new, Year of construction: 2025, grinding wheel width: 480 mm, grinding wheel diameter: 720 mm, Workpiece diameter: 1 - 300 mm, grinding wheel diameter: max. 725 mm, grinding wheel width: 300-380 mm. Lhjdpfx Asdld T Repmsk Base machine weight: approx. 13.5 tons, drive power: max. 100 kW. Centerless grinding machine for continuous and plunge grinding, fixed grinding center. Grinding wheel diameter 725 mm for maximum service life and productivity, especially for use with conventional grinding wheels. Hydrostatic guides for maximum accuracy of the grinding and regulating slides. Direct drive via servo motors for the grinding and regulating slides. Infeed device with a separate slide for the feeler and servo contour. Height adjustment of the guide rail via servo motor, enabling easy and quick changeovers.

Condition: good (used), Grinding wheel – diameter: 175 mm Spindle overhang: 180 mm Operating voltage: 400 V Machine weight, approx.: 300 kg Space required, approx.: 0.90 x 0.60 x 1.80 m Ljdsc Skfbopfx Apmohk

Condition: like new (used), Year of construction: 2025, operating hours: 650 h, functionality: fully functional, total height: 2,274 mm, total length: 3,061 mm, total width: 2,129 mm, feed length X-axis: 15,000 mm, feed length Y-axis: 15,000 mm, feed length Z-axis: 15,000 mm, type of input current: three-phase, grinding wheel diameter: 150 mm, overall weight: 3,300 kg, rotational speed (max.): 10,500 rpm, travel distance X-axis: 320 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 470 mm, input current: 30 A, input frequency: 50 Hz, input voltage: 400 V, space requirement width: 3,000 mm, space requirement length: 4,000 mm, space requirement height: 3,000 mm, Equipment: rotational speed infinitely variable, WALTER CNC Grinding Machine HELITRONIC MINI PLUS (RAPID version) GE Fanuc Series 31i - B5 2025 650 working house. please see all information in attached PDF file * Machine Type: WALTER CNC Grinding Machine HELITRONIC MINI PLUS (RAPID version) * Fire extinguishing system DIMES * Holder for sharpening stones * Tool gripper Lhodeztti Aepfx Apmok * Protective and cleaning arbor * Plug gauge * Setting disc * Pull stud * Clamping arbor for hobs (diameter 32 mm) * Clamping arbor for hobs (diameter 40 mm) * Foot operated switch * Keyboard shelf * Standard grinding wheel adaptor (HSK50 form A, d20, D50, L55, L1=25 mm) * Standard grinding wheel adaptor (HSK50 form A, d20, D50, L55, L1=45 mm) * Standard grinding wheel adaptor (HSK50 form A, d20, D50, L55, L1=85 mm) * Dynamometric Key / torque wrench * Dynamometric Key * Mounting wrench * Sensor * Coolant unit Location in Israel . ready for inspaction . need export license

Year of construction: 2005, condition: ready for operation (used), - USED - CNC EXTERNAL GRINDING MACHINE CENTRE HEIGHT: 171 mm DISTANCE BETWEEN CENTRES: 430 mm MAX GRINDING LENGTH: 400 mm MAX ADMITTED LOAD: 150 Kg X-AXIS TRAVEL: 170 mm Z-AXIS TRAVEL: 600 mm RAPID FEEDS: 12 m/min SPINDLE: 830 rpm; 24 Nm GRINDING WHEEL SIZE: 508 x 80 x 203,2 mm MOTOR POWER: 7,5 kW CONTROL UNIT: FAGOR 8055 TCO WEIGHT: 4500 Kg ACCESSORIES: PAPER FILTER ; FUME EXHAUSTER ; Lhodpjyvlxdefx Apmok MAGNETIC FILTER ; GRINDING WHEEL BALANCER NOTE: 0-9° SWIVELLING TABLE; SWIVELLING CHUCK; INVERTER FOR KEEPING THE PERIPHERAL EXTERNAL GRINDING WHEEL SPEED STEADY; PIECE LOCKING DEVICE WITH PNEUMATIC SYSTEM; HYDRAULIC OPENING TAILSTOCK AND DEVICE FOR SEARCHING THE CYLINDRICITY

Condition: good (used), CNC grinder 3 grinding units on each side Ledpfjvviamjx Apmehk

Condition: good (used), Year of construction: 1981, Long-belt grinding machine Lhsdoztnlrjpfx Apmjk Manufacturer: Johannsen Type: T 8E Year of manufacture: 1981 Table size: 2,500 x 950 mm Max. workpiece height: 470 mm Overhang: 300 mm Reversible operation (left-right) Power: 4 kW Grinding belt dimensions: 7,100 x 150 mm

Condition: excellent (used), max. wheel diameter 300 / 400 mm gear width 76 mm max. module 6 min. module 0,5 Control BWO CNC 921 Lhsdpfjzq Hmcjx Apmok adjustment of stroke position 94 mm/Hub stroke 82 mm no. of strokes 75 - 1000 Hub/min number of teeth 5 - 200 taper of shaper cutter SK 45 table diameter 400 mm total power requirement 50 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 5,0 x 3,8 x 3,4 m Machine in top condition.

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor, crane motor -Manufacturer: ABM Greiffenberger Ledsxamghjpfx Apmjhk -Engine: Type 3G225F/132 / D 80 b-4 -Power: 0.75 kW -Speed: 4 rpm -Design: B5 -Shaft: Ø 65 x 105 mm -Protection class: IP 54/55 -Dimensions: 705/305/H400 mm -Weight: 106 kg

Condition: used, Year of construction: 2021, Manufacturer: Kolbe Model: MW52-120 Year: 2021 Condition: Used Serial Number: 128 0461 Stock Number: 3418 Hole plate diameter: Enterprise, E52, 130mm Capacity max: 2000 kg/h Hopper: 120 litre Power: 3 x 400V, 8.6kW Dimensions: 1550 x 950 x 1500 mm Lhjdpfx Apezqr Sqjmsk Weight: 560 kg With single mixer in the hopper and safety cover over head

Condition: used, Year of construction: 2005, Technical details: workpiece diameter: 63,5 mm centre distance: 350 mm honing length max.: mm total power requirement: kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2,70x2,x2,60 m Technical data G0504 working space Length of the clamping surface mm 1550 Number of T-slots mm 2 Width of the T-slots mm 18 Distance between T-slots mm 180 Center height (tailstocks) mm 350 Swivel range of the fine wheel head (U-axis) degrees Center distance - tailstock / fine wheel min./max. mm 120/225 Input resolution (all NC axes) mm / degrees Delivery slide Movement range (= Z-axis travel) mm 105 Input resolution mm tool Outside diameter min./max. mm 225/275 Hole diameter mm 160 Width mm 60 workpiece Outside diameter min./max. mm 40-150 Module min./max. mm 1.25-4.0 Tooth width max. Mm 45 weight Weight of the machine approx. Kg 5500 Operating fluid requirements Cooling lubricant recommendation, see chap. 8th Hydraulic fluid HLP D 46 approx. Itr 100 Speeds and feeds Tool speed (continuously adjustable) max. 1 / min 2000 Feed rates Rapid traverse / feed Z direction up to m / min 2 X direction up to m / min 2 Lsdpfewrh H Nox Apmohk U-direction up to m / min 2 V-direction up to m / min 2 C3 direction max.degree / sec 12 Electrical equipment Operating voltage V 400 Control voltage / lighting voltage V DC / AC 24/2 Frequency Hz 50 Power requirement approx. KVA 27 If the electrical installation has to be carried out according to customer specifications, only the information in the electrical documentation applies. Motor data Servo drives: Nm 1 / min Tool drive C1 27.0 00 Workpiece drive C2 27.0 00 X-axis 20.0 00 Z-axis 20.0 00 U-axis 6.0 00 Vertical portal (V1 axis) 6.0 00 Portal horizontal (U1 axis) Gripper axis of rotation C3 5.0 00 Loading slide (X1 axis) 5.0 00 Three-phase motors: KW 1 / min Hydraulic motor 1.5 1410 Central lubrication 0.07 Coolant pump 4 2840 Hydraulic equipment Delivery rate Itr / min 21 System pressure bar 50 Clamping pressure for: headstock max. Bar 35 Clamping tailstock min./max. bar 20 Only available if required. Not all limit values ??can necessarily be reached at the same time. If several maximum values ??come together in a processing task, performance restrictions must be expected! We reserve the right to make changes to the specified constructions, dimensions and weights *

Condition: used, ROSA LINEA IRON 11.6 is a CNC surface grinder engineered for precision, high accuracy and reliable performance. Capacities: table 1100×500 mm; travels X 1350 mm, Z 650 mm; table load max 1100 kg; grinding length 1200 mm; width 650 mm; wheel Ø400×100 mm, bore 127 mm. Specs: wheel speed fixed 1500 t/min; table speed 1–40 m/min; automatic cross feed stepless 1–3 m/min; voltage 3x400 V 50 Hz; machine weight ≈6400 kg; dimensions 5500×2490×2600 mm. Accessories: coolant system, paper filtration, magnetic plate 1100×500 mm, grinding wheel with flange. Delivers tight tolerances; suited to automotive, aerospace, toolmaking, medical and watchmaking. Lhsdpfszqbhzox Apmsk

Condition: good (used), Year of construction: 2022, Tool grinding machine, GEMINI Clottu AB-175, serial number 1949, manufactured in 2022. Lhedsztc Nlopfx Apmjk

Condition: ready for operation (used), functionality: fully functional, One used CNC gear grinding machine OERLIKON Opal 800 Lhsdpeyucd Hefx Apmek Max. tip diameter: 1000 mm Min. root diameter: 40 mm Min. module: 1 Max. module: 16 Number of teeth: 999 Max. gear width: 630 mm Opal grinding wheel and diamond disk Only single profile grinding possible, see photo.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, CNC Spiral Bevel Gear Cutting Machine Gleason No 631 Year of manufacture: 2011 Control: SIEMENS 840d Retrofitted in 2011/2012 with new control, drives, etc. The machine was fully overhauled in 2011. A new control system and drives were installed. Lhedpfx Apow Tfb Sjmek

Condition: ready for operation (used), Max. Gear Diameter: Approx. 100 – 110 mm Max. Rack Length: 1460 mm Max. Stroke Length: 55 mm Max. Module: 5 Stroke Rate: Clamping Table Size: 160 x 1550 mm Spindle Diameter: Approx. 70 mm (Tool bore diameter ø44.45 mm) Lsdpey R Sxtjfx Apmshk

Condition: ready for operation (used), Used bevel gear lapping machine Manufacturer: Oerlikon Model: SL 2 The machine is available for immediate collection. Lodpfx Apsycc Riomehk

Condition: ready for operation (used), thread length: 3,000 mm, Maximum spindle bore is Ø 80 mm. The possible diameter from the traverse path is max. Ø 250 mm and min. Ø 20 mm. Machining length: 3000 mm. Comes with accessories: change gears, steady rest. For further technical data, please refer to the PDF file. Lhodjv Huihjpfx Apmjk

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Grinding worm dimensions: Min./Max. outer diameter: 280/350 mm Width: 84/104 mm Max. pitch with limitations: MOD 8.0 (DP 3.2) Number of threads: up to 3 with limitations Max. usable width (shift distance): 90 mm Ledpfx Aoyfnlkjpmehk For detailed technical information, please refer to the attached PDF file. Accessories: Several Fässler diamond wheels Dressing device Grinding stones Turbo separator

Condition: used, Jones & Shipman 540 Surface Grinder (6" x 18"), 460 x 150mm Magnetic Chuck, Power Rise & Fall Wheel Head. S/No. 1682/78 Location: These lots are located in Burton-on-Trent, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Lhodezr I Dlopfx Apmsk

Condition: excellent (used), Year of construction: 1982, KLINGELNBERG SNC 30 GRINDER Brand: Klingelnberg Model: SNC 30 Type: Industrial grinder Year: 1982 Serial number: 3837 FEATURES: – Complete machine – Hydraulic unit and filtration system included – Heavy-duty industrial installation – Precision machine – Equipment visible in the photos Lhedpfxsy S Akpe Apmek

Condition: good (used), Code: 0460 Brand: SAMCO Model: LL 3000 Belt sander with double goose neck for wood, furniture, window frames, composite materials, aluminium and various Technical data: Ledpfx Aszpvy Ajpmshk Cast-iron structure Table length mm 3000 Table width mm 800 Vertical stroke mm 650 Motor Hp 4 N°2 speeds rpm 1450/2800 Automatic table lifting Belt width mm 120 Belt length max mm 8000 Overall dimensions mm 4350 x 1500 x 1550 h Weight kg 600

Condition: used, Year of construction: 1994, Grinding length: 2600 mm Grinding width: 850 mm Dust extraction nozzle diameter: 180 mm Lhjdpjzg Nawjfx Apmok Motor: 4 kW Speed: 1430 rpm Belt speed: 22 m/s Weight: approx. 700 kg Location: Customer

Condition: ready for operation (used), Year of construction: 1998, Saacke UWIC Lhjdszrz I Djpfx Apmsk