Surface grinder

ELB-Schliff PERFEKT BD 8 SPS

Condition: used, Year of construction: 1980, grinding length 500 mm grinding width 200 mm Giodpfxjwb Hygs Amrjw workpiece height 290 mm Machine from the German Federal Institute of Physics and Metrology - geometrically revised - electrics tested, fully functional, relevant parts replaced - all wear parts replaced - colour light grey, colour condition good Equipment: - electro magnet 500x200mm - grinding spindle overhauled 2-axis display for Y and Z axes Automatic delivery for Y and Z axes Y-axis with zero shutdown Manual hand dresser Stepless speed for grinding wheel V-constant via disc wear Paper band filter system, used Max. height with 250 disc diameter 290mm max. grinding area 600x250mm max. load incl. magnet 100kg Warranty: 1 year on geometry and electronics, Germany-wide Delivery: ex works Shipping time: immediately Payment: before pickup Acceptance at our premises Shipping according to your specifications

Condition: used, Year of construction: 1992, grinding length 0800 mm grinding width 500 mm workpiece height 400 mm table-size 800 x 400 mm table speeds 1 - 25 m/min cross feed autom. 0 - 60 mm/Hub grinding wheel size 400 x 100 x 127 mm grinding spindle speed 1400/2800 U/min total power requirement 10 kW voltage 380 V weight of the machine ca. 6 t Machine has cooling arrangement, auto. vert. feed, dressing arrangement and Gjdpfx Amjwgnz Asrjiw wheel flanges. Control doesn't work continuesly !!

Condition: good (used), overall weight: 1,200 kg, Machine equipment as required available for an additional charge – almost anything is possible. We specialize in retrofitting Jungner machines. Godpjtwpyyefx Amrsiw

Condition: used, Year of construction: 2013, Punching capacity 220 kN laser capacity in Watt 4000 travel -x axis 2500 mm travel -y axis 1250 mm Cutting capacity structural steel 8 mm Cutting capacity stainless steel 8 mm Cutting capacity aluminum 6 mm workpiece weight 280 kg weight of the machine ca. 24.000 kg dimensions 10130 x 8898 x 2328 mm Includes DORNER 2200 Series conveyor belt Godpfx Amsy D T S Uerjiw Operating hours: - Approx. 7,880 h Standard equipment: - Travelling ball-bearing tables - Linear magazine for tool stations and clamping jaws - 22 tool stations, 3 clamping jaws - Foot switch for closing the jaws - Flap for stamped parts 500 x 500 mm incl. sensor - Chip container - 2 good parts containers (stamping and laser side) - Initial fill of hydraulic oil - FocusLine - NitroLine - FastLine - Additional Xp and Yp axes - Ejection cylinder for laser parts - High-speed flap for laser parts 500 x 500 mm incl. sensor - Liftable laser cutting table - Liftable laser cutting table - Slag cone detection TRUMPF Laser: - CO2 laser TruFlow 2700 incl. LensLine and optimized StandBy - Maintenance-free turbo radial blower - High-frequency excitation - TASC laser control Cutting head: - Lens cutting head with 170 mm lens - Universal quick-change device (UTI) with bus connection - ControlLine Punching head: - Electro-hydraulic punching head - Hydraulic single-tool holder with 360° rotation - Programmable hold-down device (active/passive/re-adjustment) - Tool length compensation - Spray lubrication for punch - Punching scrap extraction - Level monitoring for thread forming and tool lubrication Control system: - Open control system based on Rexroth IndraMotion MTX - 15" TFT color screen - Teleservice via the Internet - Automatic shutdown - Production plan Data transfer - USB interface - RJ45 network connection Safety: - CE marking - Dual-beam safety light curtains - Emergency stop

Condition: like new (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 700 mm, total height: 2,800 mm, total length: 1,350 mm, total width: 1,260 mm, workpiece weight (max.): 300 kg, table width: 450 mm, overall weight: 2,300 kg, type of input current: three-phase, table length: 888 mm, drilling depth: 500 mm, Technical equipment -4-way guide changer -32-way electrode changer -Preparation for rotary swivel axis -High quality of drive axes and guides -Integrated compressor cooling units for electronics and external connection option for dielectric cooling -High erosion performance thanks to MOSET generator -Fine filter for working with small pipe diameters EROSIX CONTROL -Fast probing -Simple programming for complex 5-axis machining -Extensive measuring cycles -Program transfer and storage via TCP/IP interface -High operating comfort Gjdevppw Sspfx Amreiw

Condition: good (used), Year of construction: 2003, pad printing machine, NIR POWER TC 24, year: 2003, Preis: 1.900 Euro, price: Mr. Rainer Eckerle Gieded Ai Hkepfx Amrew

Condition: refurbished (used), Year of construction: 2024, ### Discover our selection of robust and precise bed milling machines! Are you in search of a reliable bed milling machine that boosts your productivity? Experience unparalleled precision and performance with our new and refurbished bed milling machines. Our machines offer X-travel distances from 1500-5000mm and are available with Heidenhain or Siemens control. With Y and Z travel distances up to 1200mm, you have limitless possibilities. Some refurbished machines are in stock and quickly available! Discover our extensive special accessories, such as universal heads, tool changers, and more, to make your bed milling machine even more versatile. Whether for complex workpieces or challenging tasks, our machines always deliver the best results. Trust in our years of experience and let us optimize your machining processes together. Invest in quality and precision - contact us today! Here is a selection of possible machine types, and we are happy to offer additional models or special machines upon request: TECHNICAL MAIN DATA: BFM Series including 15% BAFA subsidy and more! - X-travel: 1500-5000 mm - Y-travel: 1000 mm - Z-travel: 950 (opt. 1500) mm - Max. table load: 5000 kg - Spindle taper: 50 SK - Spindle speed: 3500 (5000 opt.) rpm - Spindle drive: 15/18.5 (22/26 opt) kW ACCESSORIES: Manual Universal Head, Siemens or Heidenhain Control, Linear scales in X-Y-Z axis, Chip Conveyor Screw execution front/rear, and more. Extensive SPECIAL ACCESSORIES available on request to make the machine even more productive. Currently available refurbished machines with warranty and BAFA subsidy, e.g.: - CORREA CF17D: HEIDENHAIN TNC-426, Travels (X/Y/Z): 2000 / 800 / 800 mm, manual milling head, and more. - CORREA CF25/25: HEIDENHAIN TNC-530, Travels (X/Y/Z): 2500 / 1000 / 1500 mm, automatic universal head UAD (all 0.1º) / 6,000 rpm, and more. - Additional models available on request Contact us now and explore the world of innovative bed milling technology! Gedpfx Aepwn Hhsmreiw Our service for you: - Consultation and solution finding on-site - Organization of machine transport to your facility - Installation, assembly, commissioning, and ready-to-use handover - Financing and exploration of funding opportunities through KFW and BAFA, and more.

Condition: new, Year of construction: 2026, The laser processing center skyCUBE M / P / SL - the new standard in laser material processing! (* Prices depending on equipment, this is a brand new laser machine from our production) Laser options according to your needs: CO2 laser 150W / 250W / 400W or fiber laser 1500 - 6000W PFEIFER laser processing center skyCUBE Processing areas: Mclass = X 1250 x Y 650 x Z 100mm Pclass = X 1250 x Y 1250 x Z 100 mm SLclass = X 1250 x Y 2550 x Z 100 mm skyCUBE laser processing center - the new multifunction laser engraving machine and laser cutting machine - laser processing easy - high precision - laser engraving, cutting with high speed and quality. Our new and best multifunctional talent not only impresses the most experienced user with its newly thought-out construction. This CO2 laser / fiber laser shows its outstanding capabilities as a CO2 or fiber engraving laser as well as a CO2 or fiber cutting laser in all industrial applications. With an optional laser power of up to 1500W (1.5kW), the CO2 laser device / fiber laser system can also be used extremely flexibly in your production. Gsdpfx Amobnphvjroiw skyCUBE laser devices meet all requirements of class 1 according to DIN EN 60825-1 and thus offer you the highest level of safety. Depending on the selected and installed laser power, this CO2 laser / fiber laser is ideally suited for cutting and engraving many materials, such as: various metals, acrylic glass, solid wood and wood-based materials, wood composite materials, paper, cardboard, various plastic and foam materials, textiles, and much more The excellent design of the laser machine, 100% produced in Plauen/Germany, guarantees the laser user a high working accuracy with consistently high quality from the metal construction to the laser source. With a cutting speed of up to 8000 mm/s and an engraving speed of up to 4000 mm/s, the high-quality laser technology produces clean and very sharp cut edges and precise laser engravings. The ergonomic design with a pull-out work table makes it easier to load the system. A drawer in the lower part of the machine is used to collect the clippings. User-friendly and intuitive - the supplied skyCUBE PC software (ready for Windows®). A simple, practical user interface adapted to the Windows standard lets you work quickly and effectively. The software is characterized by high system stability, professional monitoring with appropriate machine operation and control as well as compatibility with common file formats. The data is output via levels - separately for each level, including definition of the sequences and the type of processing. The parameters, such as laser power and processing speed, are automatically saved for each level and can therefore be retrieved in a material database at any time and can be reproduced. With a computer connected via LAN / USB interface, the laser projects are transferred to the skyCUBE M laser processing center. From there, these can be processed repeatedly without the PC having to be switched on. A modern touch control panel gives you access to all system information and functions. Laser processing center skyCUBE at a glance: German industry standard Machine steel construction for safe and vibration-free accommodation of the laser components and axis systems, on rollable industrial leveling feet

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: NTC20 - 14720, cooling capacity: 21 kW (28.55 HP), type of input current: three-phase, type of cooling: water, overall weight: 225 kg, input voltage: 400 V, total width: 950 mm, total length: 1,080 mm, total height: 1,400 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Air-cooled chiller / water chiller, Type: NOVATECH NTC 20 NOVATECH NOVATECH NTC 20 are air-cooled compact water chillers suitable for indoor/outdoor installation (IP 54). Includes a shell-and-tube evaporator, 110-liter buffer tank, and built-in circulation pump. Galvanized steel frame, hot-painted with polyester powder. Special features: - Mounted expansion tank for internal water only - Shut-off valve between water inlet and outlet - Water outlet balancing valve Cooling capacity: 21 kW Cold water temp. Outlet/Inlet (°C): 15 / 20 Flow rate (l/min) max. 100 Available pump pressure (bar) max. 3.3 Ambient temperature (°C) 35 Refrigerant: R 410A Electrical data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max. power consumption (kW) 8.85 Max. current (A) 12.5 Starting current (A) 19 Protection class: IP54 Dimensions: Length (mm) 1080, Width (mm) 950, Height (mm) 1400 Weight (kg) 225 Connection: Rp 1" Serial no.: 14720 Year of manufacture: 2020 Condition: Visually 1-2, Technically OK Used, like new Price: Available upon request in euros (plus VAT from Nettetal) – 3-month warranty Gsdpfxswcflwe Amreiw Used machines may have cosmetic defects due to use. (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 88131 Lindau

Condition: good (used), Year of construction: 2014, functionality: fully functional, Table surface: 850 x 400 mm Magnetic table: 800 x 400 x 105 mm Gedpfx Ajy T Nuwomrsiw Max. table travel (X x Y): 950 x 440 mm Max. workpiece weight: 700 kg (230 kg on the magnetic table) T-slots on the table: 3 pcs x 17 mm Distance between table and spindle center: 47,5 – 547,5 mm Grinding wheel dimensions: D355 x 38 x d127 mm Spindle speed: 1500 / 1800 rpm (50Hz / 60Hz) Spindle drive power: 3.7 kW / 4.0 kW Longitudinal travel: 3 – 25 m/min (hydraulic and stepless) Cross travel: 1 – 1000 mm/min Vertical feed rate: 1 – 1000 mm/min Minimum increment / feed amount: 0,0001 mm – 0,0002 mm Machine weight: 4000 kg Dimensions (L x W x H): 3310 x 2228 x 2710 mm Accessories / Equipment - Semi-automatic operation - Magnetic table 800 x 400 mm - Coolant system with magnetic separator - Paper band filter - Machine feet - Digital display system for the infeed / increment - Built-in wheel dresser in the spindle head The machine is being sold due to company liquidation. It is in good condition and still under power in Hungary.