Used Gea Decanter for sale (193)

Condition: like new (used), Cutter CFS GEA CutMaster 500 VACUUM After capital renovation 3 months warranty for parts Lrjdpjyn Dy Nofx Ahkjr

Year of construction: 2010, condition: used, Manufacturer : GEA Niro Soavi S.p.A. Model : NS 2006 H Version : ARIETE Year : 2010 Type: Laboratory piston homogeniser Execution : SANITARY Special features: FDA-compliant + electropolished (Ra < 0.5 µm) + cGMP-compliant   Number of Plungers: 2 Plunger material: CERAMIC Plunger diameter: 10 mm Plunger stroke: 40 mm No. of Stages : 2 Type of Control : HANDWHEEL Ledpfx Aeyyq E Djhksrr Maximum pressure: 1500 bar Maximum viscosity: 500 cP Maximum temperature: 140 °C   Main motor power: 5.5 kW Speed: variable Min. flow rate: 17.5 L/h Max. flow rate: 35 L/h   Heat exchanger with no cross-flow Power cabinet + control panel Complete technical file

Condition: used, Year of construction: 1999, Capacity: 350 hl/h Ledpfezty Tujx Ahkerr Operating over pressure: 24 bar Desing temperature: 104 °C Length: 1,6 m Width: 0,85 m Height: 2,2 m Weight: 5000 kg Features: product pump H: 9,8 bar (Hygiana CN II, GEA, 350 hl/h), booster pump H: 4,7 bar (EURO Hygia CN II, GEA, 350 hl/h), hot water pump H: 1,3 bar (Maxa -DIN 80-2ßß 4/4, GEA, 700 hl/h)

Condition: like new (used), Year of construction: 2013, This floor-standing machine is designed for mixing a large number of dry products. Thanks to the planetary motion of the mixing tool, intensive and homogeneous mixing is achieved. The system consists of a stainless steel vessel—material 316L, mirror-polished, Ra < 0.8 µm—and a stainless steel housing, in which the vessel lid with the integrated mixing units and drives is installed. The mixing vessel has a capacity of approximately 90 liters (usable volume approx. 30 to 60 liters) and is placed and clamped onto two arms. The mixing material is filled in, after which the vessel is raised hydraulically, causing the mixing tool to immerse into the product. The mixer is equipped with a 45° spiral-shaped stainless steel mixing tool; the speed can be regulated via a gearbox. The mixing speed is adjustable—48, 82, 135, and 231 rpm. Vessel discharge is performed via a centrally located bottom outlet. Operation and control, including recipe and batch management, is performed via an operator panel on a separate stainless steel control cabinet. The operating language is English. The system is prepared for use in ATEX-rated (explosion-protected) areas. Lredpfx Aex Antuehkjr Electrical configuration: 230/400V, 3-phase, 50 Hz, IP55 Space requirement: 90 x 130 x 235 cm Weight: approx. 850 kg

Condition: used, all stainless steel mobile Lrodozum N Sspfx Ahker adjustable speed belt width 600 mm with air knife dimensions (l x w x h) : ± 3.250 x 1.000 x 2.000 mm

Year of construction: 2009, condition: used, GEA Niro Soavi NS2002H Laboratory Homogenizer – 30 L/h – 60 MPa – 2009 The GEA Niro Soavi NS2002H is a compact, high‑pressure laboratory homogenizer designed for R&D, pilot trials and small‑scale production. This 2009 unit is in very good condition and offers a processing capacity of up to 30 L/h (30 dm³/h), depending on product and pressure. With a working pressure up to 60 MPa (600 bar), the NS2002H delivers efficient particle size reduction and stable emulsions, making it ideal for demanding formulations and scale‑up work. Key Features • Model: GEA Niro Soavi NS2002H • Year of manufacture: 2009 • Capacity: up to 30 L/h (product and pressure dependent) • Working pressure: up to 60 MPa (600 bar) • Laboratory / bench‑scale design – compact and easy to install in R&D labs • Stainless steel product contact parts for hygiene and corrosion resistance • Adjustable homogenizing pressure for precise process control and repeatability • Designed for continuous operation with stable, reliable performance Typical Applications • Dairy: milk, cream, flavoured dairy beverages • Food & beverage: sauces, dressings, juices, nutritional drinks • Cosmetics & personal care: creams, lotions, gels, serums Lsdpfxjy Nmy Aj Ahkjrr • Pharma & biotech: emulsions, suspensions, nutraceuticals, pilot batches Benefits • Fine and uniform particle size for improved product stability • Enhanced texture, mouthfeel and visual appearance • Low product hold‑up volume – ideal for trials and high‑value products • Easy operation and cleaning, suitable for frequent product changeovers Capacity: 30 L/H on 600 Bar Working Pressure: 600 bar Max No. Stages: 2 condition: Very Good condition Available: Immediately

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, input current: 24 A, Excellent condition brine injector – complete steaker line (type TDC-400), brine cooler and brine filter, little used, fully functional. 3-phase connection, 12 kW, 24 A, 380 V. We speak English, German, and ex-Yugoslav languages. Contact also possible via WhatsApp. Ledpfx Asyfgwlohkorr

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, GEA MultiFormer 400 | Plate Former Manufacturer: GEA Food Solutions Bakel B.V. Model: MultiFormer 400 Machine No.: E022110205415 Year of manufacture: 01/2021 Machine weight: 1200 kg Power supply: 380–415 V, 3-phase, 50 Hz Power (kW): 8 kW Current consumption: 15.4 A Belt: Stainless steel mesh belt, width 400 mm Machine dimensions: 3100 × 1000 × 2700 mm Additional equipment included: Forming plates: 2 pallets with a set of plates for various product shapes. Ledpsy Sbzmefx Ahksrr Service stand: Made of stainless steel, equipped with 2 additional discharge belts (width 400 mm). Dimensions: 1350 × 600 × 2100 mm. Tool trolley: Original GEA trolley for easy storage and changeover of forming parts. Dimensions: 1200 × 700 × 950 mm. The GEA MultiFormer 400 is a professional food forming machine utilizing proven plate technology. This 2021 unit features a modern design “Made in the Netherlands” that ensures maximum hygiene and production precision. The system allows for quick product changeover – from classic burgers and nuggets to custom 2D and 3D shapes. Thanks to its stainless steel mesh belt and the included discharge belt system, the machine is ready for direct integration with coating, frying, or freezing lines. The included tool trolley and complete set of forming plates make this package an extremely flexible solution for meat, poultry, and plant-based food processing plants.

Condition: good (used), Hermetic hydro clarifier, complete, tool set, 30 kW motor power, with documentation and overhauled. Price: 35,000 euros. Lodpfx Ahoy Rtlzeksrr

Condition: excellent (used), Gea combiGrind 200 frozen block grinder. In lovely condition. Has been fully checked over. stainless steel worms. Ljdpfx Ahoy U Hriekjrr

Condition: used, Year of construction: 2020, functionality: unexamined, machine/vehicle number: 1739-596, rotational speed (max.): 4,800 rpm, Equipment: type plate available, Used disc stack separator for fermentation lees separation. Machine mounted on a complete skid with the option to purchase additional spare parts. Motor: 55 kW - 60 Hz. Belt drive. Permissible nominal bowl speed: 4,800 rpm. Minimum throughput: 8 m³/h; maximum throughput: 22 m³/h. Permitted feed product density: 1.16 kg/dm³. Permitted heavy liquid density: 1.1 kg/dm³. Permitted solids density: 1.3 kg/dm³. Maintenance tool set with ring spanner and compression tool included. Lredpfx Ajxy R A Tehkjr

Condition: excellent (used), Year of construction: 2016, GEA Niro Ariete NS2006P piston homogeniser Serial: 12590 2016, Stainless, Max Press. (Mpa) 25, rated flow rate 150 dm3/h, 3Ph, with box of spares Ledpfxew Ulc Ej Ahksrr

Condition: used, all stainless steel suitable for thermal oil heating nett belt length 7.000 mm nett belt width 700 mm adjustable speed infeed conveyor outfeed conveyor sediment removal system filter mechanical hoists overall dimensions (l x w x h) : ± 12.500 x 2.400 x 3.900 mm thermic heating power 254 kw Lsdpfxjzudths Ahkjrr

Condition: used, 325L bowl capacity blad shaft motor power 120 kW/306 A (AC) Bowl motor power 3.7 / 4.4 kW - 8.2 / 8.8 A Ejection motor power 1.5 kW - 3.5 A Hydraulic pump motor power: 2.2 kW - 5.0 A blade shaft fan motor: 0.3/1.2 kW - 1.5/4.4 A Lrodpfxezvbxwo Ahker Other: 3 kW - 8 A Total power: 133 kW - 337 A Temperature measurement Operating voltage: 400 V / 50 Hz Control voltage: 24 VDC / 230 VAC Control: Cut Control Pro 2-speed turntable Product ejector (right) Knife cover Bowl cover Automatic lubrication Loader for Eurobins 200L (left) Weight: ± 5.390 kg Water connection 1" / 3-4 bar Air connection DN6 / 6 bar For dimensions, see the attached PDF.

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Specifications - Feed volume: 400 - 500 m³/week Lsdpfevhctwsx Ahksrr - Feed volume: 80 - 100 m³/day - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C Consumption - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h - CIP water: approx. 19 m³/h - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0 Cleaning-in-Place (CIP) - Max. temperature: 85 °C - Max. pressure: 10 bar - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0

Condition: used, Year of construction: 2012, GEA Milk Separator MSE 100-06-177 Year of manufacture: 2012 Maximum permissible drum speed: 7200 rpm Maximum permissible feed density: 1.0 kg/dm³ Heavy liquid: 1.0 kg/dm³ Solids: 1.1 kg/dm³ Min./max. feed temperature: 5/100 °C Max. throughput: 30 m³/h Lrodpfx Aowayr Tshkjr

Condition: excellent (used), Year of construction: 2014, Rarely available for sale, GEA Comas Tartomatic 1000 in beautiful condition. Has not been used very much. Comes with many accessories as shown in the photographs. Lrjdpfx Asvd Elnshker

Condition: used, Evaporator GEA KUBA -Type: SGBE 63-F42 -Cooling capacity: 25.3 kW at DT8, 20.2 kW at DT7 Lrjdpfx Ahjzt Sczekor -Fin spinning: 7 mm -Electric heating -Fans: 2 x 630 mm -Dimensions: 3080 x 930 x 1130 mm -Refrigerant: Freon -Volume: 29.9 L -Quantity in stock: 6 -Stock number: CH 615 -Condition: Used in very good condition, evaporator 100% tight, fans working, ready to work

Condition: like new (used), HERMETIC CLARIFIER. POWER: 7.5 kW. COMPLETE TOOL SET. INSPECTED. DOCUMENTATION AVAILABLE. PRICE: 25,000 EUROS PLUS VAT. Ledjy S Smyjpfx Ahksrr

Condition: used, Item: L-032016-GEA-Damrow Cheese Prepress 15,000 L Used GEA-Damrow Cheese Prepress, 15,000 L capacity, in very good condition. Recently dismantled! Lrsdpfx Ahoztwmrokjr The complete unit was in operation until the beginning of the year. Please contact us for further information.

Condition: used, Year of construction: 2006, Overview This GEA Westfalia GSC15 beer centrifuge, manufactured in 2006, is designed for beer clarification with low oxygen pickup. The machine has a reported capacity of approx. 20 hl/h and is specified with an oxygen pickup of < 10 ppb, making it suitable for breweries requiring gentle clarification with minimized oxygen ingress. The centrifuge is currently still in production and is planned to be decommissioned during 2026. It is installed on a stainless steel skid frame and includes the control cabinet mounted directly on the machine. The system is equipped with stainless steel process piping, pressure gauges, flexible product connections, an ABB drive motor, and an integrated Grundfos pump unit. The control interface is located on the dedicated PLC panel and includes an LCD display, membrane keypad, and emergency stop. Included in the scope are the control cabinet, maintenance tools, and a spare maintenance set including seals, oil, and related service items. Overall, the unit appears to be a compact and complete brewery centrifuge package suitable for small to medium-sized breweries. Technical Data - Manufacturer: GEA Westfalia Separator AG - Model: GSC15 Lrsdpfjzfyyxsx Ahkor - Machine Type: Beer centrifuge - Year of Manufacture: 2006 - Capacity: approx. 20 hl/h - Oxygen Pickup: < 10 ppb - Application: Beer clarification - Controller Model: CIP-P 5500 LH - Control Cabinet: Included, mounted on the machine - Control Interface: PLC panel with LCD display and membrane keypad - Drive Motor: ABB - Pump Unit: Grundfos pump integrated into skid - Construction: Stainless steel skid frame with adjustable leveling feet - Piping: Stainless steel process piping with pressure gauges and flexible hose connections - Certification: CE - Current Status: Still in production - Planned Decommissioning: 2026 - Included Accessories: Maintenance tools and spare maintenance set including seals, oil, etc. - Location: Belgium - Condition: Used, currently operational

Condition: used, net belt width ± 600 mm total electrical power 33 kW thermal connection: NW32 2x5 tiers product height: ± 100 mm cooking time min/max : 4-40 min Ljdpfxozudt Is Ahkorr max. temperature: 200°C automatic elevator with belt wash system suitable for CIP-cleaning suitable for steam injection (heating and product yield): 4-8 bar, connection: NW 40 turning to the left

Condition: excellent (used), Year of construction: 2022, GEA 600 mm Pro Edge Drive spiral for sale. This was installed new in 2022 and only used for a few months. 18 tiers, 600mm belt. Lrjdpfx Ahov U T Tbokor

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 12CG001009, Used GEA continuous mixing and granulation system, model ConsiGma1, stainless steel product contact surfaces, with Brabender feeder, twin screw continuous mixer, and fluid bed dryer granulator, with controls, CE and Ex rated, 400 volt, 50 Hz, seiral# 12CG001009, built 2012. Ljdpfx Ajtvm Uljhkorr

Condition: used, Used GEA Westfalia model FSD 1-06-107 stainless steel disc bowl centrifuge. Clarifier design with total capacity 1 litre and solids holding space 0.5 litre. Heavy liquid 1.0 kg/dm3 and solids 1.4 kg/dm3 solids. Maximum speed rated 10,000rpm. Centripetal pump output up to 300 l/h depending on medium. Belt driven by 1.1 kW 220/380 volt 3/50 3,000 rpm motor. Mounted on skid with HMI control panel and stainless steel collection pot. New 2018. Lredpfx Ajzimv Uohkor