Used Gastronomy Resolution for sale (1,173)

Condition: new, AEG speed monitor Lrodpsriutgsfx Apijn Type AL-NI DJ 086 144 4220-220-00 unused from magazine resolution stock number 28455

Condition: ready for operation (used), Year of construction: 2002, operating hours: 24,396 h, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table width: 600 mm, table length: 850 mm, table load: 600 kg, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 14,000 W, number of slots in tool magazine: 30, number of axes: 4, This 4-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2002. It features a travel of 640 mm on the X-axis, 600 mm on the Y-axis, and 500 mm on the Z-axis. The machine has a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMC 64V linear vertical machining centre we have for sale. Contact us for further details. • Condition: Used (good) • Operating hours: 24396 h • Electrical: • Nominal power: 39 kVA • Voltage: 400 V • Frequency: 50 Hz • Secondary voltage: 230 V • Control voltage: 24 V • Current: 63 A • Current (max): 56 A • Rapid traverse: • X: 70 m/min • Y: 40 m/min • Z: 40 m/min • Feed Force (X, Y, Z-Axis - 40% ED): 7000 N • Feed Speed (X, Y, Z-Axis): max. 40 m/min • Rapid Traverse (Y, Z-Axis): 40 m/min • Rapid Traverse (X-Axis): 60 m/min • Ball Screw Diameter/Pitch (X, Y-Axis): 40 x 15 mm • Position Accuracy (Y, Z-Axis Standard - Indirect Measurement System): 0.020 mm • Position Accuracy (X-Axis Standard - Direct Measurement System): 0.005 mm • Position Accuracy (Y, Z-Axis Option - Direct Measurement System): 0.008 mm • Resolution: 0.001 mm • Input Resolution (X, Y, Z-Axis): 0.001 mm • Main Drive Power (40% / 100% ED): 18 / 14 kW • Main Drive Torque (40% / 100% ED): 95 / 75 Nm • Front and Rear Spindle Bearing Diameter: No specification • Spindle Speed: Infinitely programmable from 0 to 12,000 min⁻¹ • Setup Operation Spindle Speed: 0 to 800 min⁻¹ • Program Check with Manual Intervention Spindle Speed: 0 to 5,000 min⁻¹ • Motor Type: Direct drive via speed-controlled asynchronous motor with liquid cooling • Maximum Torque (S1 - 100% ED): 70 Nm • Maximum Torque (S6 - 40% ED): 100 Nm • Maximum Motor Power (S1 - 100% ED): 13 kW Ledpeyz Tkfsfx Apiern • Maximum Motor Power (S6 - 40% ED): 19 kW • Included Equipment: Chip Conveyor (Spiral type) • Chip Conveyor Discharge Height: 380 mm • On this machine, compressed air can be activated through the spindle using an M-code command

Condition: ready for operation (used), Year of construction: 2010, operating hours: 36,033 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: DMG ErgoLine, overall weight: 16,000 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, number of axes: 4, This 4-axis DECKEL MAHO DMC 80 H duoBLOCK was manufactured in 2010. It features a maximum spindle speed of 12,000 rpm and an impressive X, Y, and Z-axis travel of 800 mm each. The machine has a robust weight of 16,000 kg, ensuring stability during operation. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 80 H duoBLOCK horizontal machining centre we have for sale. Contact us for further details. Lredpfxoy Ryyrs Apijn • Power capacity: 103 kVA • Current (In max): 148 A • Voltage: 400 V • Frequency: 50 Hz • Control voltage: 24 V • Measuring system: Direct, absolute, photoelectric • Resolution (X, Y, Z): 0.001 mm • Position tolerance (X, Y, Z): 0.007 mm (Standard) / 0.006 mm (with Accuracy Package) • Position tolerance A-axis: 9 ws (Standard) / 8 ws (with Accuracy Package) • Position tolerance B-axis: 8 ws (Standard) / 6 ws (with Accuracy Package) • Position tolerance C-axis: 7 ws (Standard) / 5 ws (with Accuracy Package) • Table height (top of pallet to floor): 1120 mm • Distance spindle center to table: 150 mm (Motor spindle) / 145 mm (Gear spindle) Technical Specification Taper Size HSK 100

Condition: ready for operation (used), Year of construction: 2017, operating hours: 9,271 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 510 mm, spindle motor power: 15,000 W, overall weight: 2,750 kg, controller manufacturer: FANUC, controller model: i Series, number of slots in tool magazine: 12, number of axes: 3, Horizontal turning machine manufactured in 2017. This DOOSAN LYNX 2100MA features a maximum turning diameter of 300 mm and a turning length of 510 mm. It is equipped with a 12-station drum turret and driven tools, providing versatility in machining. If you are looking to get high-quality turning capabilities, consider the DOOSAN LYNX 2100MA machine we have for sale. Contact us for further details. • Maximum turning diameter: 300 mm • Maximum turning length: 510 mm • Swing over bed: 600 mm • Bar capacity through spindle: 51 mm • Spindle bore: 61 mm • Spindle nose: A2-5 • Rapid traverse X / Z: 30 / 36 m/min • C-axis resolution: 0.001° • Turret: 12-station drum turret with driven tools • Driven tool speed: 6,000 rpm • Driven tool motor power: 3.7 kW • Tool shank size: 20 × 20 mm Ljdpjzc Iy Nofx Apijrn • Boring bar shank diameter: 32 mm • Chuck size: 6" hydraulic chuck • Tailstock quill diameter: 65 mm • Tailstock quill taper: MT4 • Tailstock quill stroke: 80 mm • Total parts counter: 393,105 pcs (control counter) • Cutting time: 9,271 h Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2010, A Mimaki UV printer including a Kühnast UV conveyor dryer is available. 1) Mimaki UJF-3042 UV LED flatbed printer, year of manufacture: 2010, print dimensions X/Y: 300mm/420mm, max. material height: 50mm, max. print resolution X/Y: 1440dpi/1200dpi, machine dimensions X/Y/Z: approx. 1200mm/1000mm/800mm, weight: approx. 120kg. 2) Kühnast 3000 UV conveyor dryer, year of manufacture: 1998. Both machines must be inspected. An on-site inspection is possible. Ledpjzfp H Ujfx Apiorn

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table length: 550 mm, table width: 320 mm, table load: 400 kg, spindle mount: MK 2, total height: 1,750 mm, drill spindle length: 130 mm, total length: 1,400 mm, total width: 1,400 mm, rotational speed (min.): 60 rpm, rotational speed (max.): 3,000 rpm, distance between stands: 600 mm, quill travel distance: 130 mm, quill stroke: 130 mm, space requirement width: 2,100 mm, spindle motor power: 550 W, workpiece weight (max.): 400 kg, overall weight: 1,600 kg, number of previous owners: 2, Equipment: rotational speed infinitely variable, Special price due to retirement and business closure! HENRI HAUSER OP3 – Unique piece / excellent condition! (Bienne/Biel, Switzerland) This quality will never be produced again! Coordinate drilling machine / precision drilling machine with tool package in excellent, exceptional condition, second-hand (owned for 41 years). The coordinate drilling machine features the rare option of motorized table drive in the X and Y axes with potentiometers. This eliminates the need for tedious manual adjustment of individual coordinates over long distances using hand cranks. Furthermore, it has the rare thermal stabilization and expansion compensation feature. Two heaters are provided for this purpose, which can and must be switched on separately before starting work and to maintain high accuracy and dimensional precision. This explains the factory-specified high positioning accuracy of 0.002 mm with a resolution of 0.001 mm. What is unique is that the Hauser has two Heidenhain digital displays with a total of 4 glass scales with 1My resolution, also for the quill feed. This is a major advantage when drilling and milling precisely in depth with Wohlhaupter, spindle tools, etc. With the options mentioned and in this first-class condition, it is very rare and highly likely no longer available. Those familiar with these machines, which are primarily used in the watch industry, gunsmithing / defense industry, precision engineering, material testing, and the optical industry, know the value of these masterpieces of mechanical engineering. Also ideally suited for engine construction/overhaul, technical universities and training, materials technology, special machine construction, etc. All documents, manuals, electrical diagrams, etc. are, of course, available in their original form! Technical data: Table length 550 mm, table width = 320 mm, longitudinal travel X-axis = 400 mm, transverse travel Y-axis = 250 mm, vertical travel Z-axis = 400 mm Max. workpiece weight on the table = 400 kg, spindle mounting MK 2, stroke of the drilling spindle (Z-axis) = 130 mm Distance table to spindle = 590 mm, spindle speeds continuously variable from 60 rpm to 3000 rpm Feeds: Drilling spindle slide: 2 steps from 0.03 mm/rev to 0.06 mm/rev Connection 50 Hz 3x 380 Volt, spindle motor 0.80 hp Machine dimensions: Length = 1200 mm, Width = 1150 mm, Height = 1650 mm Machine weight approx. 1500 kg. Shipping (direct transport without transshipment) within the EU is possible. Price net, export within the EU. Fair offers are welcome! Lredpfxsy Sx Nhj Apijn

Condition: good (used), Year of construction: 2004, Ref. -No.: 10612 Manufacturer: LIEBHERR Type: LC 3002 Year of construction: 2004 Type of control: CNC-Steuerung Control: LIEBHERR Storage location: Halberstadt Country of origin: Germany Serial no.: 30XX Max. Module: 30 mm Min. Module: 4 mm Max. Workpiece Diameter: 3000 mm ambient temperature: +15...+38 ° cutting speed: 25 - 250 m / min Milling head swivel angle: 0,001 ° Resolution accuracy: 0,1 Degree Workpiece table load: 300 kN Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 230 A Fuse in the supply line: 250 A Max. milling diameter spur gears/helical gears: 3.000 mm Further information: Suitable for internal and external gear cutting. Lrjdezc D A Tepfx Apion The machine can be viewed by appointment.

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Ljdpfx Apezc Dzisisrn Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 - Oil mist separator - Set of tool holders, - Workbenches - 2x 6 drawers - Vise - Jaw width 125 mm - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10442 Manufacturer: LIEBHERR Type: LC 122 Year of construction: 2002 Type of control: CNC-Steuerung Control: LIEBHERR PC NC Storage location: Halberstadt Country of origin: Germany Hob diameter max.: 90 mm Table Diameter: 145 mm Max. Module: 3 mm Smallest number of millable teeth: 4 Milling head swivel angle: +/- 45 ° Resolution accuracy: 0,1 Degree Workpiece table load: 17 kN Milling speed: 450 - 4.500 1 / min Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 55 A Fuse in the supply line: 63 A Max. milling diameter spur gears/helical gears: 125 mm Max. milling width spur gears/helical gears: 250 (axial) mm Spindle stroke: 180 mm Max. cutter width: 200 mm Further information: Ambient temperature: +12°.....+40° Ljdeym Nbcjpfx Apisrn Operating noise: 78 dB (A) Milling head designation: motor milling head Workpiece axis: vertical Stand: movable Table: fixed Milling method: axial hobbing in the same or opposite direction The machine can be inspected under power by arrangement.

Condition: used, Year of construction: 2009, 2009 OKUMA MILLAC 800 VH Palletised System 5 Axis Machining Centre With OSP P200M Control Automatic Pallet Changer (APC) 6-Station Automatic Pallet Pool, Including 4 Additional Pallets. Tool Magazine 120-Station ATC (Automatic Tool Changer). Linear Glass Scales On 'X, Y, Z' axes (In Addition To Standard Encoders). 'A'-Axis Rotary Scale: Circular Glass Scale On Tilting Head Spindle ('A'-Axis), 0.001° Resolution, Equipped With Tilting Brake Clamping. 'C'-Axis Rotary Scale: Circular Glass Scale On Rotary Table ('C'-Axis), 0.001° Resolution, Equipped With Continuous Brake Clamping. Maximum Spindle Speed 10,000rpm (18.5/22 kW Motor), 21 Nm Torque. Spindle Taper BT 50 BIG PLUS. Pallet Dimension 800 x 800mm. Maximum Pallet Load 1,000kg. Axis Travel 'X'=1,020mm, 'Y'=1,020mm, 'Z'=1,020mm. Rapid Traverse 'X'=30m/min, 'Y'==30m/min, 'Z'=30m/min, 'A'=3,600min-1, 'C'=3,600min-1. Cutting Feed 'X, Y, Z'=1-12,000mm/min, 'A, C'=1-2,400°/min. Spindle Nose To Pallet Top (Vertical) -100 To 920mm. Spindle Centre To Pallet Centre (Vertical) -50 To 970mm. Spindle Centre To Pallet Top (Horizontal) 150-1,170mm. Spindle Nose To Pallet Centre (Horizontal) -300 To 720mm. Maximum Tool Ø125mm (Ø200mm Without Adjacent Tool), Maximum Tool Length 400mm, Maximum Tool Weight 20kg. Tool Change Time (T-T) 4.5sec. Power Capacity 60kVA. S/No.143486 (2009/03). Lrjdpfx Apjzfhudjisn With Workpiece Probe: Spindle-Loadable Measuring Probe (From ATC) For Workpiece Zero-Setting & Inspection, Including Macro B Software Option On The CNC. Air Blow System: Spindle Annular Air Blow For Chip Removal & Cone/Flange Cleaning (BT 50 Big Plus). Tool Sensor: BLUM Laser System For Tool Length And Ø Control, Including Pneumatic System For Laser Lens Cleaning. Coolant Through Spindle (CTS): High-Pressure CTS System At 70 BAR (13/18 L/min / 6.9 MPa) With Inline Centrifugal Filter. Spindle Air/Fluid Output: Selectable Air Blow Or Coolant Through Spindle. Shower Coolant: Overhead Shower Wash System. Wash Gun: Coolant Wash-Down Gun Including Dedicated Pump. Chip Conveyor: Drum Filter Type Chip Conveyor With 700L Tank. Oil Skimmer: Installed On The Chip Conveyor. Work Coordinate System Expansion: Expanded To 400 Tool/Workpiece Origins. Tool Offset Expansion: Expanded To 500 Tool Length And Radius Offsets. 3D Tool Radius Compensation: Three-Dimensional Tool Radius Compensation Software. SUPER NURBS Kit: Included (Features: Tool Length Compensation, Vector Control, Lateral Tool Compensation). Data Transfer: DNC-DT Ethernet Software Interface. Programming Functions: Scaling (G50/G51 codes), Mirror Imaging, And Programmable Custom Message Input. Cycle Restart: Sequence Return / Block Restart From Any Interrupted Block. MOP (Machining Operation Monitor): Self-Learning Cutting Load Control/Tool Overload Monitoring. G93 Function: Inverse Time Feed Function. Thermal Compensation: Spindle Tilt Thermal Compensation Software. Overall Dimensions L4,760 x D6,300 x H3,600mm. Weight 22,000kg.

Year of construction: 2022, condition: like new (used), New digital label printing machine Valloy Bizpress 13R. The equipment was only used for demonstration purposes. Toner-based LED printing technology Color configuration: CMYK Printing speed: 7.3 m/min Printing resolution: 1200x1200 dpi Media width: 210 - 330 mm Printing width up to 304 mm Media thickness: 50 - 350 microns (30 - 350 gsm) Media type: paper, PP, PVC, PE Eye-mark sensor for pre-printed or cut media Unwinder & rewinder max. roll diameter 450 mm Size: 1400x850x1000 mm Lrodowwg N Topfx Apion Features: Pneumatic expandable unwinder and rewinder Web guiding system with splice table Media cooling system High voltage anti-static ionizer Electric tension control via magnetic powder brake Machine inspection and testing are welcome. Installation and training can be provided for an additional fee.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, 3D Coordinate Measuring Machine | Brand: MAUSER/ZEISS | Type: KMZ-G 602520 | Year of manufacture: 1988/2003 Optionally available with an air-conditioned hall. The machine has been calibrated regularly by ZEISS. The last calibration was performed on August 7, 2025, the next calibration (recommended) is scheduled for August 2026. TECHNICAL SPECIFICATIONS:: Ledpfx Apsy Iub Seijrn Measuring ranges (Length x Width x Height): 6.000 x 2.500 x 2.000 mm Travels: - X-axis: 6.000 mm - Y-axis: 2.500 mm - Z-axis: 2.000 mm - Length measurement uncertainty according to VDI/VDE 2617: U3 = (5,0 + L/250)µm, V2 = 3,5 µm - Length measurement uncertainty according to ISO 10360-2: MPE_E = (5,0 + L/250)µm - Environmental conditions for maintaining the specified accuracy: * Temperature range: 21°C +/- 3°K * Temperature fluctuation: 0,5°K/h, 1,0°K/d, 0,5°K/m - Environmental conditions for operation: * Temperature range: + 15°C up to 35°C * Humidity: 30 up to 70% General features, Equipment: - Portal measuring machine with ultra-precision guides and ball-screw drives - Second Y-axis with granite guideway and air bearing - High-resolution Zeiss scales - Positive-drive mechanisms in all three axes - Collision protection for the quill and probe head (for VAST-TK) for manual and setup modes - Safety position for crane interlock - Reference temperature compensation - Microcomputer control - Practice piece: cube, star-shaped stylus - Reference probe D = 8 mm, length: 115 mm - Reference standard D = 30 mm - includes basic software package - Load-bearing capacity: Limited only by the foundation design - Measuring system: VAST - Software: Zeiss CALYPSO - Documentation Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, MACHINE Dimensions (height x width x depth): 2760 x 1110 x 1840 mm Weight: 2750 kg WORK TABLE Table size: 840 x 600 mm Dielectric above table: 360 mm Maximum workpiece weight: 1000 kg T-slots: 4 x 10 mm Distance between table and quill without chuck (max/min): 595/180 mm Ljdpfjwbalvex Apiorn WORKING HEAD Travel range X - Y: 565 x 400 mm Travel range Z: 415 mm Resolution X - Y - Z: 0.001 mm C-axis resolution: 0.001° Rapid traverse speed: 800 mm/min Max. electrode weight without rotation: 100 kg Max. electrode weight with rotation: 15 kg DIELECTRIC SUPPLY Tank volume: 400 liters Paper candle filters: 4 pieces GENERATOR Dimensions (height x width x depth): 1800 x 600 x 920 mm Weight: 300 kg Nominal current: 60 – 120 A Connected load: 15 – 23 kVA

Condition: excellent (used), Year of construction: 2019, operating hours: 403 h, functionality: fully functional, turning length: 1,200 mm, spindle bore: 120 mm, controller model: Siemens 840 Dsl, Equipment: documentation/manual, Technical data: Turning length 1200 mm Chuck diameter 350 mm Working stroke X top/bottom 200 mm Working stroke Y. axis 210 mm (+130/-80) Working stroke Z. axis 1200 mm Maximum travel speed W/X/Y/Z meters/minute 45/40/40/46 Ball screw diameter W/X/Y/Z mm 40/40/40/40 Profile rail guide, B/X/Y/Z mm 45/45/45/55 Tool flight circle 700 mm Maximum center distance 1200 mm Main spindle/counter spindle Spindle bearing diameter 120 mm/160 mm Spindle passage 65/105 mm Spindle bore diameter 80/120 mm Spindle flange/spindle head DIN 55026 A6 / A8 Drive power 100% ED 22 KW/67.4 Drive power, 40% ED 24 KW/80 Nominal speed 1400 rpm Maximum speed 5,700 rpm Torque 100% ED 150 nm/585 Torque 40% ED 191 nm/795 C-axis resolution 0.001 degrees Both turrets: Tool holder: VDI 40 Maximum speed rpm 6000 torque drive 12,000 speed drive Maximum drive power kW: 28.5 torque drive 23.5 speed drive Maximum torque (25% ED) Nm: 85 torque drive 56 speed drive Lrjdpfxevw Upco Apion Dimensions: 4500 x 2500 x 2500 Weight approx. 16000 kg Control: Siemens 840 Dsl

Condition: used, Year of construction: 2014, 2 Vertical Turning Machines (Tandem) Manufacturer: EMAG Model: VL 3 Year: 2014 Control: Fanuc 31/32i TECHNICAL SPECIFICATIONS FOR THE VL3 MACHINE (Subject to errors and omissions) WORKING AREA Chuck diameter: 170 mm Swing diameter: 210 mm X-travel: 400 mm Lrjdpfsytn Emsx Apion Z-travel: 200 mm Loading time (depending on clamping device): 2–4 sec MAIN SPINDLE Spindle flange to DIN 55026, size 5 Spindle bearing diameter (front): 80 mm Maximum spindle speed: 7,500 rpm MAIN DRIVE AC asynchronous motor Power at 40/100% duty cycle: 25/16 kW Full power from spindle speed (100% ED): 1,800 rpm Torque at 40/100% duty cycle: 134/85 Nm FEED DRIVE Rapid traverse speed, X axis: 60 m/min Rapid traverse speed, Z axis: 30 m/min Feed force (X and Z): 5 kN Ball screw diameter (X/Z): 40 mm TURRET Cylinder shank mount DIN 69880, 12 positions Shank diameter: 40 mm ELECTRICAL EQUIPMENT according to VDE 0113 Operating voltage: 400 V Control voltage – DC: 24 V; AC: 230 V Frequency: 50 Hz Connected load without/with live tool: 28 / 31 kW Supply line protection: 50 A DIMENSIONS & WEIGHT Length: 2,500 mm Length incl. chip conveyor: 3,600 mm Width: 1,900 mm Height: 2,300 mm Weight: approx. 5,500 kg Linear roller guides in the X-axis located outside the machining area. GANTRY SLIDE INCLUDING SLIDE GUIDE Motor spindle mounting AC synchronous drives for X and Z axes Encapsulated linear measuring systems Resolution all longitudinal axes: 0.001 mm (absolute measurement) Rapid traverse: X axis 60 m/min, Z axis 30 m/min 1 MOTOR SPINDLE size 5 DIN 55026 Max. speed: 7,500 rpm Power at 40/100% duty cycle: 25/16 kW Torque at 40/100% duty cycle: 134/85 Nm HYDRAULIC UNIT with gear pump. CENTRALIZED OIL SUPPLY for lubrication of ball screws and roller guides COOLING UNIT Controls the machine’s thermal balance. Keeps motor spindle, turret, and control cabinet at ambient temperature. TOOL CARRIER SYSTEM 1 12-STATION TURRET with mounting holes Ø40 DIN 69880 Shortest indexing time via electric motor drive Cooled for consistent accuracy Internal coolant supply to tool in cut position WORKPIECE STORAGE & TRANSPORT SYSTEM 1 CIRCULATING WORKPIECE FEEDER Storage capacity: 27 workpieces (Ø 30–85 mm), or 18 workpieces (Ø 30–130 mm), Max. workpiece height: 100 mm Loading height: 1020 mm Chain-type accumulating conveyor with transport prisms Workpieces are NC-positioned for clamping device take-over. The pick-up spindle retrieves blanks from the conversion-free storage and conveyor system. COOLANT AND CHIP REMOVAL SYSTEM 1 COOLANT SUPPLY with integrated coolant tank, capacity approx. 300 l, coolant filter Coolant pump delivery rate: approx. 80 l/min at 7 bar 1 CHIP CONVEYOR Discharge height: 1,250 mm, hinge belt design 1 EMULSION MIST EXTRACTION from the machining area ADDITIONAL EQUIPMENT AND EXPANSIONS WORKPIECE STORAGE & TRANSPORT SYSTEM 1 INTERFACE FOR EMAG TRANSFER AND FLIP UNIT OP20 COOLANT AND CHIP REMOVAL SYSTEM 1 FLUSHING NOZZLES: 2x in working area, 1x in machine base HYDRAULICS & PNEUMATICS 1 MAINTENANCE UNIT FOR COMPRESSED AIR with mounting 1 PICK-UP DEVICE BLOW-OFF (2 nozzles, WITHOUT maintenance unit – see maintenance unit compressed air)

Condition: good (used), Year of construction: 2006, 1 used 4-axis horizontal machining center Brand Haas Type EC 1600 Year of manufacture 2006 Travel ranges X-axis 1626 mm Y-axis 1270 mm Z-axis 813 mm Spindle centerline to table 304 mm Spindle SK 50 Max. rated power 22.4 kW Max. speed 7500 rpm Max. torque 460.0 Nm 700 rpm Table size Length 1626 mm Width 914 mm T-slot width 16.00 mm T-slot center-to-center distance 125 mm Number of T-slots in standard configuration: 7 Max. load capacity on table (evenly distributed) 4536 kg Integrated 4-axis (B-axis) Table 1626 mm x 813 mm mm Clamping surface diameter 762 mm Adjustability 360° Max. workpiece swing diameter 1270 mm Table load 4536.0 kg Max. rated power 3.7 kW Rotational torque (continuous) 2712 Nm Backlash 30 arc-sec Gear ratio 500:1 Braking torque 5423 Nm Minimum resolution 0.001° Indexing accuracy ± 30 arc-sec Repeatability 15 arc-sec Rapid traverse rate on B axis 36°/sec Max. feed rate for machining on B axis 36°/sec Spindle centerline to table 146 mm Max. feed rate for machining in x, y, and z axes 12.7 m/min Lrjdpfx Apjv N Di Asion Rapid traverse rate on X axis 15.2 m/min Rapid traverse rate on Y axis 15.2 m/min Rapid traverse at Z 15.2 m/min Axis motors 30-station tool changer Max. tool diameter (full) 102 mm Max. tool diameter (adjacent positions empty) 254 mm Max. tool length 508 mm Max. tool weight 13.6 kg Tool-to-tool (average) 8.00 s Chip-to-chip (average) 12.60 s General information Coolant tank capacity 360 L Dimensions Domestic pallet 488 cm x 366 cm x 346 cm Export crate 488 cm x 366 cm x 348 cm Weight 13608.0 kg

Condition: used, Year of construction: 2024, operating hours: 4 h, functionality: fully functional, machine/vehicle number: B24AA452D3, LixelKity K1 with RTK Module – Demo Unit, Like New Condition For sale is a LixelKity K1 mobile mapping scanner, including an RTK module, offered as a demo unit in very good, like-new condition. The LixelKity K1 is a modern, high-precision 3D scanning system for the quick and efficient capture of buildings, construction sites, infrastructure projects, and terrain data. By combining LiDAR technology, high-resolution cameras, and RTK support, the system enables precise and georeferenced data acquisition in real time. Features: LixelKity K1 3D LiDAR scanner RTK module for centimeter-accurate positioning Integrated cameras for colored point clouds Mobile mapping system for indoor and outdoor use Compact and user-friendly design Original accessories included Application areas: Surveying and geodesy Ledpfx Apjzfgimeisrn Construction and BIM projects As-built documentation Architecture and monument preservation Infrastructure and asset management Digital twins and 3D modeling Condition: Demo unit Technically flawless Optically in very good condition Ready for immediate use Inspection and demonstration are possible by appointment. We will gladly send further information, technical data, and images upon request.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 18,476 h, spindle speed (max.): 7,000 rpm, travel distance X-axis: 70 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 250 mm, spindle motor power: 22,000 W, controller manufacturer: INDEX, controller model: C200-4D Control, number of axes: 9, This 9-axis Index C100 was manufactured in 2012. It features a robust cast iron machine frame and a powerful main spindle with a maximum speed of 7000 rpm and a bar diameter of 42 mm. The machine includes three turrets with live tools, offering versatile machining capabilities. If you are looking to get high-quality turning capabilities, consider the Index C100 horizontal turning machine we have for sale. Contact us for further details regarding this machine. Lrodpfx Apszcykgjion - Machine Frame: Cast iron machine frame in vertical bed design- Tool Carrier Guides: Plate guides with high level of rigidity and dampening- Axis Drives: Double-scissor kinematics for tool carriers; AC synchronous drive technology- Headstock Design: Thermo-symmetrical design- Main Spindle (D42): Spindle head size 5 (DIN 55026 and ISO 702), max. bar diameter 42 mm, max. speed 7000 rpm, front bearing diameter 75 mm- Main Spindle Power: 22/29 kW (at 100%/40% duty cycle)- Main Spindle Torque: 50/65 Nm (at 100%/40% max.)- Main Spindle Clamping Cylinder: Hollow clamping cylinder D42/14 for collet or chuck clamping, hydraulic operation, stroke 12 mm, clamping pressure 8/80 bar, max. thrust 34 kN, max. pull 34 kN- C-Axis Drive (Main & Counter Spindle): Hollow shaft motor, angular gauging system on spindle, resolution 0.00014 degrees, repeatability scatter Psmax = 0.01 degrees- Main Spindle Clamping Unit: Single pressure clamping unit, adjustable from 8 to 75 bar- Counter Spindle (D42): Spindle head size 5 (DIN 55026 and ISO 702), max. bar diameter 42 mm, max. speed 7000 rpm, collet chuck diameter 110 mm, front bearing diameter 75 mm- Counter Spindle Power: 16.5/19 kW (at 100%/40% duty cycle)- Counter Spindle Torque: 32/43 Nm (at 100%/40% max.)- Counter Spindle Slides (Z-axis): AC motor and ball screws drive, working travel 500 mm, rapid traverse 60 m/min, acceleration 10 m/s^2, feed thrust 3000 N- Counter Spindle Clamping Cylinder: Hollow clamping cylinder D42/14, hydraulic operation, stroke 12 mm, clamping pressure 8/80 bar, max. thrust 34 kN, max. pull 34 kN- Counter Spindle Clamping Device: Single pressure clamping device, adjustable from 8 to 75 bar- Tool Carrier 1: X-axis travel 70 mm (rapid 30 m/min, acc. 9 m/s^2, feed force 3000 N); Z-axis travel 250 mm (rapid 60 m/min, acc. 9 m/s^2, feed force 3000 N); Y-axis travel 70 mm (rapid 15 m/min, acc. 5 m/s^2, feed force 3000 N). Turret 1 with 10 stations, parallel shank mountings D25x48 (DIN 69880), live tools on all stations (Power 4.2 kW, Torque 11 Nm, max. speed 8000 rpm)- Tool Carrier 2: X-axis travel 70 mm (rapid 30 m/min, acc. 9 m/s^2, feed force 3000 N); Z-axis travel 400 mm (rapid 60 m/min, acc. 9 m/s^2, feed force 3000 N); Y-axis travel 70 mm (rapid 15 m/min, acc. 5 m/s^2, feed force 3000 N). Turret 2 with 10 stations, parallel shank mountings D25x48 (DIN 69880), live tools on all stations (Power 4.2 kW, Torque 11 Nm, max. speed 8000 rpm)- Tool Carrier 3: X-axis travel 125 mm (rapid 30 m/min, acc. 10 m/s^2, feed force 3000 N). Turret 3 with 10 stations, parallel shank mountings D25x48 (DIN 69880), live tools on all stations (Power 4.2 kW, Torque 11 Nm, max.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 19,295 h, spindle motor power: 10,700 W, spindle speed (max.): 8,000 rpm, overall weight: 6,000 kg, total width: 2,500 mm, total height: 2,600 mm, bar diameter (max.): 32 mm, travel distance X-axis: 140 mm, controller manufacturer: TRAUB, controller model: TX 8i-p, product length (max.): 4,500 mm, number of axes: 7, This 7-axis TRAUB TNL 32 P was manufactured in 2012. It features a maximum bar diameter of 32 mm and a maximum Z-axis travel of 305 mm. The machine includes two turrets with live tooling capabilities, offering 10 and 9 tool stations respectively. If you are looking to get high-quality turning capabilities, consider the TRAUB TNL 32 P swiss type turning machine we have for sale. Contact us for further details. • Number of Turrets: 2 • Maximum Z-Axis Travel: 305 mm • Main Spindle Torque: 21 / 32 Nm • Main Spindle C-Axis Resolution: 0.001° • Turret 1 Tool Stations: 10 • Turret 1 Live Tool Stations: 10 • Turret 1 Live Tool Speed: 12,000 rpm • Turret 1 Live Tool Power: 1.5 / 2.5 kW • Turret 1 Tool Holder Diameter: 45 mm • Turret 1 Turning Tool Shank: 16 x 16 mm • Turret 1 X-Axis Travel: 140 mm • Turret 1 Z-Axis Travel: 305 mm • Turret 1 H-Axis Resolution: 0.001° • Turret 1 Chip-to-Chip Time: 0.3 sec • Turret 2 Tool Stations: 9 • Turret 2 Live Tool Stations: 9 • Turret 2 Live Tool Speed: 12,000 rpm • Turret 2 Live Tool Power: 1.5 / 2.5 kW • Turret 2 Tool Holder Diameter: 45 mm • Turret 2 Turning Tool Shank: 16 x 16 mm • Turret 2 X-Axis Travel: 140 mm • Turret 2 Y-Axis Travel: -25 / +40 mm • Turret 2 Z-Axis Travel: 320 mm • Turret 2 Chip-to-Chip Time: 0.3 sec • Counter Spindle Speed: 8,000 rpm • Counter Spindle Power: 1.5 / 2.5 kW • Counter Spindle Torque: 4.5 / 7.7 Nm • Counter Spindle C-Axis Resolution: 0.001° • Maximum Clamping Length: 250 mm • Maximum Bar Diameter (Counter Spindle): 32 mm • Back Working Tool Stations: 8 • Back Working Live Tool Stations: 3 • Back Working Live Tool Speed: 12,000 rpm • Back Working Live Tool Power: 1.5 / 2.5 kW • Back Working Tool Holder Diameter: 36 mm • Rapid Traverse (X / Y / Z): 20 / 20 / 20 m/min • Maximum Feed Rate: 20,000 mm/min • Total Power Requirement: 46 kW • Space Requirement incl. Bar Feeder: 8,000 x 2,500 x 2,600 mm • Chip Conveyor: Optional, not included • Coolant System: Yes • Tool Turrets: 2 • Back Working Unit: Yes • Bar Feeder Interface: Yes • Bar Feeder: LNS Hydrobar Express 332 S2 / 3 m Lrsdpfxozcyhxe Apijn • Electronic Handwheel: Yes • Hydraulic Unit: YesMachine defects: The counter spindle is currently unusable due to prolonged inactivity. Either the sensor or the motor is defective. Technical Specification Counter Spindle Yes Driven Tools Yes Through-spindle Coolant Yes

Condition: used, SICK Safety Light Curtain C40S-1001AA030 + C40E-1001BH030 Manufacturer: SICK Condition: Used Type: Safety Light Curtain Transmitter: C40S-1001AA030 Receiver: C40E-1001BH030 Product Series: C4000 Protective field height: 1050 mm Resolution: 30 mm Safety category: Type 4 according to IEC 61496 Degree of protection: IP65 Connection type: M12 connector Supply voltage: 24 V DC Application area: Personnel protection on machines, production systems, and automated production lines Feature: Non-contact safety device Lodpfxszcw S Uo Apisrn

Condition: used, SICK Safety Light Curtain C40S-1301AA030 + C40E-1301BH030 Lodpfxjzcw Dwj Apiern Manufacturer: SICK Condition: Used, good condition Type: Safety Light Curtain Transmitter: C40S-1301AA030 Receiver: C40E-1301BH030 Product series: C4000 Protective field height: 1350 mm Resolution: 30 mm Safety category: Type 4 according to IEC 61496 Protection class: IP65 Connection type: M12 connector Supply voltage: 24 V DC Application area: Personnel protection on machines and automated systems Quantity available: 4 pieces

Condition: ready for operation (used), Year of construction: 1998, spindle speed (max.): 6,000 rpm, travel distance X-axis: 235 mm, travel distance Z-axis: 310 mm, spindle motor power: 7,500 W, total height: 1,700 mm, total width: 1,700 mm, overall weight: 2,500 kg, bar diameter (max.): 32 mm, controller manufacturer: MITSUBISHI, controller model: MSC-803, product length (max.): 2,500 mm, number of axes: 2, Horizontal turning machine manufactured in 1998. This MORI SEIKI CL 150 features a maximum turning diameter of 400 mm and a maximum turning length of 303 mm. It includes a spindle speed range of 60 - 6000 rpm and a turret with 12 stations for efficient tool management. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI CL 150 machine we have for sale. Contact us for further details. Control Unit Defective: At least data loss or damaged circuit board (unverified diagnosis) Ledjzcwy Sspfx Apiorn • Swing Over Bed: 515 mm • Maximum Turning Diameter: 400 mm • Standard Turning Diameter: 176 mm • Standard Turning Length: 150 mm • Maximum Turning Length: 303 mm • Spindle Centre Height: 950 mm • Spindle Nose: A2-5 • Spindle Bore: 43 mm • Spindle Bearing Inner Diameter: 80 mm • Standard Chuck Diameter: 169 mm • Tool Size for External and Facing Tools: 20 x 20 mm • Number of Turrets: 1 • Number of Turret Stations: 12 • Turret Index Time: 0.7 sec • Turret Clamping Force: 2300 Nm • Index Coupling Diameter: 180 mm • Automatic Tool Selection Logic: Yes • X-Axis Motor Power: 1.5 kW • Z-Axis Motor Power: 2.0 kW • Manual Feed Rate: 0 - 1260 mm/min • Programmable Feed Rate: mm/rev • Rapid Traverse X-Axis: 30 m/min • Rapid Traverse Z-Axis: 30 m/min • Positioning Resolution: mm • Coolant Tank Capacity: 123 l • Coolant Pump Capacity: 13 l/min • Lubrication: Automatic Central Lubrication • Power Supply: 380 V / 3 Phase / 50 Hz • Control Voltage: 200 V AC / 24 V DC • Connected Load: 20 kVA • Rated Power: 23 kVA • Full Load Current: 67 A • Spindle Motor Current Rating: 74 A • Interrupting Capacity: 5 kA • Frequency: 50 Hz • Voltage: AC 200 V • Phase: 3 Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 900 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 660 mm, overall weight: 3,050 kg, table load: 1,250 kg, number of axes: 3, This 3-axis Other SHEFFIELD Endeavor 9.15.7 was manufactured in 2003. It features an X-axis travel of 900 mm, Y-axis travel of 1500 mm, and Z-axis travel of 660 mm. The machine is equipped with a granite table and brushless linear motors on the X and Y axes. If you are looking to get high-quality measurement capabilities, consider the Other SHEFFIELD Endeavor 9.15.7 CMM machine we have for sale. Contact us for further details. Lrodpfxezcwfbo Apijn • CE Marked • Maximum 3D Speed: 39 m/min • Maximum 3D Acceleration: 1.7 m/s² • Voltage: 240 V • Accuracy Standard: DIN EN ISO 10360-2 • Specified Accuracy Temperature Range: 15°C – 25°C • Volumetric Length Measuring Error (MPEE): 2.8 + L/263 µm • Volumetric Probing Error (MPEP): 3.0 µm • Maximum Hourly Temperature Gradient: 2°C/h • Maximum Daily Temperature Gradient: 5°C/24h • Maximum Spatial Temperature Gradient: 1°C/m • Permissible Ambient Temperature Variation: ±5°C • Granite Table • Threaded Inserts: ISO M8 x 1.25 • Air Bearing Axes • Brushless Linear Motors on X and Y Axis • Renishaw High-Resolution Linear Scales • Geometric Error Compensation • Automatic Volumetric Temperature Compensation • Probe Head: Renishaw PH10MQ • Probe Head Weight: 645 g • A-Axis Indexing Range: 0° to 105° in 7.5° Increments • B-Axis Indexing Range: ±180° in 7.5° Increments • Positioning Repeatability: 1 µm • Maximum Extension Length: 300 mm • Probe Head Mount: M10 Thread • Probe Connection Thread: M8 Thread • Probe System: Renishaw TP20 • Reference Sphere Diameter: 19 mm • Parallel Port Sale WITHOUT Software License

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: 20221015WA-2000LJ, We offer a compact and efficient tunnel-type vegetable washing machine. The machine is equipped with a conveyor belt that automatically removes the washed vegetables at the end of the process, which significantly improves efficiency and reduces manual handling. Lrjdpfx Ajzd Tffepijn Technical specifications: Machine dimensions: 3500 × 820 × 1340 mm Power supply: 3.25 kW, 400 V Intended use: washing fresh vegetables, e.g., cabbage Tunnel design ensures even and effective washing Collection belt for automatic product discharge The machine is fully functional, ready for use, and ideal for vegetable processing plants, catering companies, and food manufacturers.

Condition: used, Year of construction: 2011, pricing can only be given out if you send me an email writing your email address. As machine seeker encrypts your email address. MACHINE: GILDEMEISTER CTX Alpha 300 V3S YEAR: 2011 Lrjdpfx Aozd R S Aepion SERIAL NUMBER: 00400003392 CONTROL: Siemens Sinumerik 840D sl ShopTurn ERGOline MACHINE TYPE: CNC Turning Center with C-Axis and Live Tooling CAPACITY: Maximum Turning Diameter: 200 mm Maximum Swing Diameter: 500 mm Maximum Turning Length: 300 mm Bar Capacity: 51 mm MAIN SPINDLE: Spindle Nose: A2-5 Chuck Size: 165 mm Hydraulic 3-Jaw Chuck Spindle Bore: 65 mm Maximum Spindle Speed: 6,000 rpm Spindle Motor Power: 16.5 kW (100% duty) 25 kW (40% duty) Maximum Spindle Torque: 192 Nm AXES: X-Axis Travel: 190 mm Z-Axis Travel: 335 mm Rapid Traverse X: 30 m/min Rapid Traverse Z: 30 m/min TURRET: Turret Type: VDI 30 Number of Stations: 12 Live Tool Stations: 12 Maximum Live Tool Speed: 5,000 rpm Live Tool Power: 3.7 kW C-Axis Resolution: 0.001° TAILSTOCK: Hydraulic Tailstock (optional depending on machine configuration) COOLANT SYSTEM: Flood Coolant Chip Conveyor Compatible ACCURACY: Positioning Accuracy: ±0.005 mm Repeatability: ±0.003 mm ELECTRICAL: Power Requirement: 400 V / 50 Hz / 3 Phase Connected Load: Approx. 30 kVA DIMENSIONS: Length: 4,260 mm Width: 2,510 mm Height: 1,825 mm MACHINE WEIGHT: Approx. 4,000 kg