Used Gastronomy Resolution for sale (1,094)

Condition: new, Year of construction: 2022, AVAILABLE FROM STOCK : Geka plasma cutting machine GCS P-4020 table size 4000 x 2000mm incl. plasma source Hypertherm 125A incl. PRONEST HYPETHERM NESTING SOFTWARE - GEKA CNC cutting table - Hypertherm Powermax 125A - cutting capacity: steel 25mm, stainless steel 20mm, aluminium 12mm - CNC control with GproCUT 2D CAD cutting software - Nesting included. - Country of manufacture Spain incl. CE conformity. - Heavy duty base for increased support and rigidity. - CNC Tex computer control with touch screen. - Linear guides on all axes for high repeatability. Rodpfxogypcls Ag Aoch - Safety cutting head to prevent damage to the cutting head. - Rack and pinion gearbox with 70kg/cm servo motors. - Fully enclosed cable drag to protect cables from damage. - Movement speed 40 meters/min. - Resolution 0.01mm. - Optional automatic lubrication on all axes. - Optional, separate suction chambers in the machine bed. - Z-axis with integrated THC (Torch Height Control) to ensure automatic cutting distance between torch and material during the entire cutting process. - Torch anti-collision system (machine stops before any collision). - Laser pointer to check X and Y axes for zero reference. - The effective cutting area for P-4020 is 4000 x 2000mm. - Portal height Z = 100 mm. - Table with compartements for aspiration

Year of construction: 1994, condition: good (used), Macmon M400 CNC with Heidenhain TNC 355 control Manufacturer: Macmon Type: M400 CNC Control: Heidenhain TNC 355 Year of construction: 1994 Weight: 2700 kg Connected load: 12 kW Travel X: 630 mm Travel Y: 450 mm Travel Z: 380 mm clamping surface table: 800x500 mm spindle revolutions: 20-2780 rpm Steps: 2x continuous Spindle power: 5,5 kW tool holder: SK40/ISO40 Axle drive: 0-2000 mm/min Axis drive rapid traverse: 5000 mm/min quill stroke W: 100 mm Swivelling of the head: 2x90 Resolution measuring system: 0.001 mm positioning: +/- 0,02 mm Special features: protective housing to open, chip tray, quill stroke Rjdpfx Asfmu E Aog Aech

Condition: ready for operation (used), Several vector network analyzers and one synthesizer-based HP function generator are available. 1) 3x HP 8753D, frequency range: 30kHz-6GHz, option: 006, max. dynamic range: 110dB, frequency resolution: 1Hz, output power min./max.: -85dBm/10dBm, power resolution: 0.05dB, input impedance: 50Ohm, measurement types: S-parameters/reflection/transmission/phase/magnitude/group delay, max. sweep speed: 200µs/point. Machine dimensions X/Y/Z: approx. 450mm/200mm/600mm, weight: approx. 25kg. 2) 6x HP 8753D, frequency range: 30kHz-3GHz, option: Standard, max. dynamic range: 110dB, frequency resolution: 1Hz, output power min./max.: -85dBm/10dBm, power resolution: 0.05dB, input impedance: 50Ohm, measurement types: S-parameters/reflection/transmission/phase/magnitude/group delay, max. sweep speed: 200µs/point. Machine dimensions X/Y/Z: approx. 450mm/200mm/600mm, weight: approx. 25kg. 3) HP 3325A, max. frequency range: 21MHz, resolution: 1µHz, max. amplitude: 10V. Machine dimensions X/Y/Z: approx. 450mm/150mm/450mm, weight: approx. 15kg. All devices were calibrated in 2019. Documentation available. On-site inspection possible. Rcodoxqqmmopfx Ag Ajh

Condition: good (used), Year of construction: 2016, resolution (max.): 800 dpi, Durst Rho 512r Rcodpsxqnrysfx Ag Ash Color: 6C Resolution: 12pl, 800 dpi (1000dpi) Print width: 500 cm

Condition: used, Year of construction: 2007, turning diameter 300 mm turning length 600 mm control FANUC, 18i-TB turning diameter over bed slide 230 mm travel x1 165 mm travel z1 700 mm travel x2 190 mm travel z2 720 mm travel -y axis +/- 50 mm main spindle bore 76 mm main spindle speed 5.000 U/min main spindle drive 22 kW max. torque on the spindle 208 Nm Rcedpfx Ajxn Amtjg Aoh sub spindle bore 76 mm sub spindle speed 5.000 U/min sub spindle drive 22 kW max. torque on the spindle 208 Nm tool turret 2 x 12 Stat. number of driven tool stations 2 x 12 speed of driven tools 5.000 U/min max. torque 47 Nm work piece power 5,5 kW C-axis resolution 0,001 ° rapid traverse x + z axis 20 / 40 m/min rapid traverse y-axis 7,5 m/min total power requirement 68,4 kVA weight of the machine ca. 7,8 t Accessories: collet fixture on main spindle, hydr. 3-jaw chuck make KITAGAWA, BB 208, 210 mmø, on sub spindle, various tool holders for turret, bar loader make HYDRAFEED, model MULTIFEED MX-1B for bar dia. 3 - 80 mm and bar length up to 1650 mm, chip conveyor, coolant with belt filter device

Condition: used, Year of construction: 2020, operating hours: 2,990 h, functionality: fully functional, machine/vehicle number: TJBX8213, turning length: 750 mm, turning diameter: 370 mm, spindle bore: 82 mm, spindle speed (max.): 4,200 rpm, travel distance X-axis: 267 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 840 mm, spindle motor power: 22,000 W, total height: 2,300 mm, total length: 3,000 mm, total width: 2,140 mm, turning diameter over bed slide: 370 mm, turning diameter over top slide: 600 mm, overall weight: 6,200 kg, TAKISAWA TS-4000YS FANUC 32i-B JAPAN Manufactured in Japan High rigidity (weight 6,200 kg, 30° slant bed, box guideways) - Main spindle: 22 kW with max. torque of 618 Nm - High performance and robust machine bed allow for heavy duty chip removal - Y-axis Technical Data: Capacity Max. swing diameter: Ø 600 mm Max. turning diameter and length: Ø 370 x 750 mm Bar capacity: Ø 82 mm Spindle Center height from floor: 1,140 mm Spindle bearing/through bore diameter: Ø 140 / Ø 90 mm Spindle nose: A2-8 Spindle speed: 4,200 rpm C-axis resolution: 0.001° Travels and Rapid Traverse Travel X-axis = 267 mm Z-axis = 840 mm Y-axis = -50 ~ +70 mm A-axis = 780 mm Rapid traverse X-axis = 30 m/min Z-axis = 30 m/min Y-axis = 10 m/min A-axis = 30 m/min Power Spindle motor (30 min / 100% duty cycle): AC 22 / 15 kW Max. torque: 618 Nm (S3 25%) Driven Tools Number of turret stations: 15 Max. tool speed: 6,000 rpm Drive power (30 min / 100% duty cycle): 7.5 / 3.7 kW Max. torque: 48 Nm Tooling Driven tool stations: 15 Tool cross-section: 25 x 25 mm For boring: Ø 40 mm Dimensions Height: 2,300 mm Depth (without chip conveyor): 2,140 mm Width (without chip conveyor): 3,000 mm Net weight: 6,200 kg Included Options: FANUC Data SERVER - TOP AUTOMAZIONI X FILES BAR FEEDER INTERFACE - KITAGAWA B6210 POWER CHUCK - AXIAL DRIVEN UNIT - RADIAL DRIVEN UNIT - UNILOCK SMS 80 COLLET HOLDER - TRANSFORMER - STD TOOL HOLDER SET - BAR PUSHER PREPARATION - TOOL SETTER - CHIP CONVEYOR - PARTS CATCHER ARM - 3 EXTERNAL TOOL HOLDERS - 2 BORING BAR HOLDERS - 1 FRONT GROOVING TOOL HOLDER - 2 INSERT DRILL HOLDERS - 1 CUT-OFF TOOL HOLDER - 2 AXIAL DRIVEN TOOL HOLDERS - 2 RADIAL DRIVEN TOOL HOLDERS - 6 BUSHINGS (OD 40 mm - Reductions 32, 25, 20, 16, 12, 10) - 3 DRILL BUSHINGS (OD 40 mm - Reductions 32, 25, 20) - FOOT PEDAL FOR POWER CHUCK OPEN/CLOSE - RIGID TAPPING - C AXIS - Y AXIS - FULL GUARDING - 8 BAR COOLANT SYSTEM - MEASUREMENT AND DRAWING PROGRAMMING - PROGRAM EDITING DURING OPERATION - PROGRAM MEMORY 1,280 m - PROGRAMMABLE DIMENSIONS INPUT - TYPE B & C PROGRAMMING CODES Rodpfoxqmrxjx Ag Aoch - DRILLING CYCLES - UP TO 1,000 PROGRAMS SAVABLE - SPINDLE ORIENTATION - CONVERSATIONAL PROGRAMMING SOFTWARE Tiwap-1 is - RAKU RAKU MONITOR (TOOL LOAD AND LIFE MONITORING) - END-OF-CYCLE/PWR-OFF LIGHTS - M FUNCTION FOR ACTUATING POWER CHUCK - HYDRAULIC UNIT - WORK LIGHT - SERVICE KEYS - ELECTRICAL DIAGRAMS/MANUALS

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: E21SJ2307......., The iCombiPro is the latest combination steamer from RATIONAL. The iCombiPro 20.1/1 Gas model with 20 GN 1/1 racks is easy to operate, even for unskilled personnel, allowing you to achieve outstanding food quality without requiring constant supervision. The unit has been inspected in our in-house professional workshop and is fully functional. The ultra-fast interim and self-cleaning functions keep your device spotless. Sample photos are shown – originals will follow shortly. The combi steamer is available from 44 kW. You will receive an invoice with VAT shown separately. Condition: Used, inspected, and fully operational Technical data: W x D x H: 877 x 913 x 1872 mm Minimum door clearance for transport W x H: 900 x 1900 mm Serial number: G21SJ2307..... Year of manufacture: 2023 Max. loading per rack: 5 kg Max. total loading: 100 kg Weight (gas unit): 273 kg Electrical connection data: Voltage: 1 NAC 230 V Gas connection load: 42 kW Fuse: 16 A Water connection data: Water inlet (pressure hose): 3/4 inch Water outlet: DN 50 Further features: Temperature range: 30°C to 300°C Automatically senses the current cooking chamber conditions Recognizes the size, loading quantity, and condition of the product, and calculates the desired browning Learns which cooking habits are frequently used and implements them Determines the ideal cooking process for the desired result MyDisplay – user-customizable, user-specific operating display TFT color display and touchscreen Application and operating manual accessible on the unit display Core temperature probe with automatic error correction for incorrect positioning and positioning aid Glazed compartment door, energy-saving LED interior lighting Including energy consumption display Humidity control: precise percentage humidity measurement and setting Individual programming of at least 350 cooking programs with up to 12 steps each Steam injection adjustable in 3 levels USB interface High-performance fresh steam generator with automatic descaling 5 programmable air speeds Integrated, maintenance-free grease separation system without additional grease filter Cool-down function: rapid cooking chamber cooling Automatic adaptation to installation location (altitude, climate, etc.) Device door with ventilated triple-glazed panel and swiveling inner pane Rcedpfxexnzvmo Ag Aoh Direct-waste connection according to SVGW permitted Splash and jet water protection IP X5 Separate solenoid valves for soft and hot water up to +30°C Automatic start time preselection with date and time settings Inner and outer material made from stainless steel DIN 1.4301 WiFi module integrated Service: We are happy to arrange certified Rational service support for you throughout Germany. Are you looking for a specific Rational model? Contact us—we have access to an extensive range of used and new equipment. We are happy to advise you on all types of units, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or Pro. Our equipment service for you: 6-month warranty on all electrical components High-quality branded equipment at fair prices Professional and competent advice—before and after your purchase Flexible options for shipping or self-collection Provision of operating manuals, wiring diagrams, and spare parts Complete range of accessories at attractive prices

Condition: excellent (used), Product advantage: Product name: Outer diameter micrometer Specification: 25-50mm Resolution: 0.001mm Rjdpfoqgc R Rjx Ag Aoch Metric conversion Product process: surface spray Scaling process: laser scaling Multifunction dual-use type: digital display plus scale

Condition: used, Year of construction: 2017, functionality: fully functional, Print width up to 320 cm Resolution 800x600 dpi Efficiency: up to 310 m2/h 4 colors (CMYK) The machine is in good technical condition and used daily for production, demo possible for those really interested. Sale due to replacement of machinery. Price is negotiable. Rcsdpfx Aowx Rb Nsg Ajh

Condition: new, Year of construction: 2025, color: grey, Container description Our offer includes a complete package with high quality and is therefore unbeatable. We only purchase gas appliances from qualified, high-quality manufacturers. The construction and the entire kitchen with the equipment are NEW! 1. information about the container Availability: Delivery time immediately Color: Anthracite Delivery included in the price, delivery to the edge of the shelf. 2. structure made of isothermal aluminum fiberglass laminate with excellent aesthetic appearance. Guarantees optimum interior temperature in all seasons. Dimensions Total length: 3000 mm Total width: 2000 mm Overall height: 2300 mm 3. gastronomic equipment; kitchen made of stainless steel and wood Gas appliances Gas grill "Bertos" , smooth plate, dimensions (W x D x H) 600 x 600 x 290, power: 8 kW, made of stainless steel, G6FL6B Gas deep fryer "Bertos" , 2 x 8 liter bowl capacity, dimensions (W x D x H) 600 x 600x 290, power: 13.2 kW, made of stainless steel, with drain tap, GL8+8B Gas cabinet for 2 x 11 liter propane gas cylinders Cooling options Small under-counter refrigerator "Liebherr" Refrigerator with glass front, also suitable for drinks Water system Water system with water canisters, 30 liter capacity with fresh and waste water canisters Two stainless steel washbasins with fittings Hygiene package with folded towel dispenser and soap dispenser 10-liter hot water boiler Pump Lighting LED lighting on the ceiling LED lighting with color play around the sales hatch with remote control Emergency light Further equipment Brushed stainless steel serving surface and work surfaces Insulating wall at the hob (fireproof) Extractor hood with labyrinth filters Non-slip floor for gastronomy Optional spit protection Access through a side door Warranty 1 year warranty on body and kitchen This price applies to the standard equipment shown. Changes or additions will incur additional costs. Of course, we can also build this model differently! Delivery time is 6 months. Rsdpfx Agoxqlkgo Aech Do you need a shorter or longer version of this model? Do you need different equipment for this sales trolley? Does your equipment require a higher payload or more sales flaps? You can determine many vehicle details yourself!

Condition: good (used), Tornos ENC 74 T CNC automatic lathe TECHNICAL DATA Movable headstock Maximum round bar passage: 7 mm Minimum round bar passage: 1 mm Square bar capacity: 5 mm Hexagonal bar capacity: 6 mm Maximum turning length of fixed guide bush (7 mm): 113 mm Maximum turning length of fixed guide bush (10 mm): 109 mm Turning length of synchronously rotating guide bush (10 mm): 81 mm Turning length of synchronously rotating guide bush with 3 positions: 72 mm Maximum turning length of MAGIC guide bush (7 mm): 104 mm Maximum turning length of Habegger guide bush (10 mm): 103 / 94 mm Collet chuck Schaublin type F13: 76-357 Minimum and maximum clamping force: 270 and 590 daN Main spindle speed: 15`000 rpm Fast feed (headstock): 15 m/min Resolution of the measurement (Z1): 0.00025 mm Guide bush holder Number of tools: 7 Maximum number of cross drilling attachments and cross milling cutters: 3 Maximum speed: 6000 rpm Square layout of the tools: 8 x 8 mm Rapid feed of the tools (X1/Y): 7.5 / 10 m/min End attachment Movement speed X2: 15 m/min Movement speed Z2: 15 m/min Number of positions for end units: 3 Center distance between units: 50 mm Counter headstock maximum clamping diameter: 7 mm Rodpfx Ajvdwcfsg Asch Collet chuck Schaublin type F13: 76-357 Maximum counter-spindle headstock speed: 12`000 rpm Speed of the rotating units: 12`000 rpm Counter operations Number of positions: 3 Diameter of bores for tool carriers: 35 mm Center distance between positions: 50 mm SCOPE OF OFFER Including: (list not exhaustive) Tornos ENC 74 T CNC automatic lathe Control: GE Fanuc Series O-TT Fire extinguishing system: Siemens Chip conveyor Coolant tank / pump High pressure pump Bar feeder: LNS Exact scope of supply according to photo gallery No liability is assumed for the correctness, completeness and up-to-dateness of the information

Condition: excellent (used), functionality: fully functional, For sale: Taylor high-performance electric double-sided grill. Digital controls Option to save custom programs Rcjdpfxexqd Eve Ag Aoh Automatic lifting of the top plate at the end of the program Acoustic signal before the end of the program Grilling surface dimensions: 94 x 47 cm Easy to maintain and clean Mobile design for easier handling Dimensions: 106 x 93 x 127 cm Voltage: 400 V

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Rcedpfx Agjxnlf Es Aeh

Condition: used, Year of construction: 1984, Technical data: Longitudinal travel (x-axis) 15,900 mm Horizontal feed path (z-axis) 790 mm Vertical feed path (y-axis) 500 mm Swivel range of the milling spindle 45°F +/- Milling spindle drive power of the DC motor 50 kW Milling spindle diameter in the front bearing 160 mm Inside tool holder ISO No. 50 DIN 2079 Outside tool holder ISO No. 60 Tool feed - manual via threaded rod M24 Spindle speeds continuously adjustable in 2 ranges from 50-500 rpm. Speed range in the 1st stage 50-250 rpm. Speed range in the 2nd stage 100-500 rpm. Step step 1:2 Range of constant power 160 rpm. Max. torque on the milling spindle 2,000 Nm Milling feed in the x-direction continuously adjustable from 40-4,000 mm/min. Rapid traverse 8,000 mm/min. Adjustment speed in the y and z-direction continuously adjustable from 20-500 mm/min. Rapid traverse for the y and z-axis 1,000 mm/min. Max. swivel speed for the milling spindle 2°/sec. Rsdovvll Sepfx Ag Ajch Display resolution of the 3 axes (positioning accuracy) 0.1 mm Operating voltage 380 volts 50 Hz Control voltage 220 volts Distance from the clamping table to the retracted, horizontally positioned milling spindle nose 500 mm Distance from the cheek support (floor) to the middle of the milling spindle in the vertical middle position 1,300 mm Distance from the clamping table to the middle of the support guide 2,300 mm Length of the cheek and support guide 16,800 mm Weight approx. 23,000 kg Defects: some leaks on the clamping cylinders

Condition: used, functionality: fully functional, mileage: 40,300 km, power: 78 kW (106.05 HP), fuel type: diesel, gearing type: automatic, first registration: 08/2014, color: white, machine/vehicle number: -9201-, Equipment: ABS, airbag, all-season tires, electronic stability program (ESP), immobilizer system, Fully equipped food truck with new kitchen We offer flexible installment plan and leasing options. Please contact us. Vehicle description The body is made of isothermal aluminum fiberglass laminate with an excellent aesthetic appearance. Guarantees optimum interior temperature in all seasons. Used car with new unused kitchen! The kitchen was built with great attention to detail. We have set ourselves the task of converting new and used vehicles into food trucks in accordance with standards. Today we can proudly say that our years of expertise have convinced our customers of our work Visit us and we will convince you of the quality of our vehicles! Technical data Engine capacity: 2,287 cm³ Emission class: Euro 5, environmental sticker 4 (green) Permissible total weight: 3,500 kg Rear parking aid Color: White Gastronomic equipment, wooden kitchen Gas appliances Gas deep fryer "Bertos", 2 x 8 liter bowl capacity, dimensions (W x D x H) 600 x 600x 290, power: 13.2 kW, made of stainless steel, with drain tap, GL8+8B Gas stove "Bertos" with 4 burners, dimensions (W x D x H) 600 x 600 x 290, power: 12.4 kW, made of stainless steel, G6F4B Gas grill "Bertos" , smooth plate, dimensions (W x D x H) 600 x 600x 290, power: 8 kW, made of stainless steel, G6FL6B Cooling options Refrigerator with glass front, also suitable for drinks Large refrigerator with integrated chest "Liebherr", 340 liter capacity Saladette with glass front Water system Water system with water canisters, 30 liter capacity with fresh and waste water canisters Two stainless steel washbasins with tap Hygiene package with folded towel dispenser and soap dispenser 10-liter hot water boiler Pump Lighting LED lighting on the ceiling LED lighting with color play around the sales hatch with remote control Emergency light Further equipment Rjdjxqlivjpfx Ag Ajch Brushed stainless steel serving counter and work surfaces Insulating wall at the cooking area (fireproof) Extractor hood with labyrinth filters Non-slip floor for gastronomy Optional spit protection Built-in insulated generator cabinet Access via step We take care of the necessary paperwork (TÜV approval and expert opinion). Warranty: 1 year guarantee on the kitchen Of course we also build this model differently! Do you need a shorter or longer version of this model? Do you need different equipment for this sales trolley? Does your equipment require a higher payload or more sales flaps? You can determine many vehicle details yourself!

Condition: excellent (used), Year of construction: 2013, Traub TNL 18-7B CNC Automatic Lathe Base machine: 2441 x 1396 mm Weight: 3800 kg Spindle height above floor: 3800 mm Connected power: 24 kW Main spindle Max. bar capacity: 18 mm Max. speed: 12,000 rpm Cross-cut speed: 5,000 rpm Z stroke: 205 mm Rapid traverse: 40 m/min Z measuring system resolution: 0.001 mm Feed force: 3000 N Spindle head / short taper: Traub short taper mount Max. clamping force: 1400 daN Max. clamping pressure: 40 bar Min. clamping pressure: 7.5 bar Piston area: 40 cm2 Total cylinder travel: 5 mm Clamping tube thread: M25 X 1 Counter spindle Workpiece diameter: 21 mm Workpiece clamping depth: 180 mm Max. speed: 12,000 rpm Strokes: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. clamping pressure: 30 bar Min. clamping pressure: 10 bar Top tool turret with B-axis Number of stations: 8 Shank cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Redpfx Agjwg Take Aech Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower tool turret Number of stations: 7 + counter spindle Shaft cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Tool drive for upper tool turret Number of driven stations: Max. 8 Drive power: 2 kW Max. speed: 12,000 rpm Torque: 3.9 Nm Tool drive for lower tool turret Number of driven stations: 7 + counter spindle Drive power: 3.4 kW Max. speed: 12,000 rpm Torque: 7.3 Nm Tool drive for the rear unit Number of stations: 7 Number of driven stations: max. 3 Pitch spacing: 46 mm Drive power: 2 kW Max. speed: 7,500 rpm Torque: 4.7 Nm Drive power: 2 kW Max. speed: 4,000 rpm Torque: 11.8 SCOPE OF OFFER INCLUDES (list is not exhaustive): Traub CNC lathe Tool holders, driven and non-driven High-pressure and belt filter system Oil mist separator Fire extinguishing system Chip conveyor Bar loader Operational documentation For the exact scope of offer, see the photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information provided.

Condition: new, power: 103 kW (140.04 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, color: black, Year of construction: 2024, machine/vehicle number: 9326, Vehicle description Fully equipped new food truck with new kitchen. We offer flexible installment plan and leasing options. Please contact us. The vehicle is new and the kitchen was built with great attention to detail. We have set ourselves the task of converting new and used vehicles into food trucks in line with standards. Today we can proudly say that our years of expertise have convinced our customers of the quality of our work Visit us and we will convince you of the quality of our vehicles! Body made of isothermal aluminum fiberglass laminate with excellent aesthetic appearance. Guarantees optimum interior temperature in all seasons. Permissible total weight 3500 kg, driving license class: B Emission class Euro 6 Environmental badge4 (green) Parking aid (rear) Gastronomic equipment, stainless steel kitchen Gas appliances Gas deep fryer "Bertos", 2 x 8 liter bowl capacity, dimensions (W x D x H) 600 x 600x 290, power: 13.2 kW, made of stainless steel, with drain tap, GL8+8B Gas stove "Bertos" with 4 burners, dimensions (W x D x H) 600 x 600 x 290, power: 12.4 kW, made of stainless steel, G6F4B Gas grill "Bertos" , smooth plate, dimensions (W x D x H) 600 x 600x 290, power: 8 kW, made of stainless steel, G6FL6B Cooling options Refrigerator with glass front, also suitable for drinks Large refrigerator with integrated chest "Liebherr", 340 liter capacity Water system Water system with water canisters, 30 liter capacity with fresh and waste water canisters Two stainless steel washbasins with taps Hygiene package with folded towel dispenser and soap dispenser 10-liter hot water boiler Pump Lighting LED lighting on the ceiling LED lighting with color play around the sales hatch with remote control Emergency light Further equipment Brushed stainless steel serving counter and work surfaces Insulating wall at the cooking area (fireproof) Extractor hood with labyrinth filters Non-slip floor for gastronomy Optional spit protection Built-in insulated generator cabinet Access via step We take care of the necessary papers (TÜV approval and expert opinion) Warranty: 1 year warranty on body and kitchen Rsdpfx Agsxqliie Asch Manufacturer's warranty from Peugeot Of course we also build this model differently! Do you need a shorter or longer version of this model? Do you need different equipment for this sales trolley? Does your equipment require a higher payload or more sales flaps? You can determine many vehicle details yourself!

Condition: excellent (used), Year of construction: 2012, Werth Scope-Check 300x200x200 3D CNC coordinate measuring machine TECHNICAL DATA Rcsdpfxovffcpo Ag Aoh Measuring capacity (X x Y x Z): 300 x 200 x 200 mm Work table, load capacity: 20 kg Magnification: X5 Resolution: 0.5 micron Weight: Approx. 300 kg No responsibility is taken for the accuracy, completeness and up-to-dateness of the information provided

Condition: excellent (used), Year of construction: 2011, TECHNICAL DATA Linear Axes (Slides X, Y, Z) Travel distances: Axis X: 250 mm Axis Y: 200 mm Axis Z: 300 mm Rapid traverse (X, Y, Z): 30 m/min Feed force (X, Y, Z): 3700 N Rodpfx Agjwv Hnmo Aech Resolution (X, Y, Z): 0.0001 mm Rotary Motion of Motor Spindle – Axis B Rotary travel range: -15° to +100° Rotary travel range (with tailstock): Tailstock in position: -20° to +45° Tailstock removed: -20° to +90° Maximum speed: 20 rpm Drive torque: 750 Nm Hydraulic clamping: 50 bar Holding torque: 300 Nm Resolution: 0.0001 mm Milling Motor Spindle HSK E40 Power at 100% duty cycle: 10 kW Power at 25% duty cycle: 15 kW Nominal torque (100%): 8 Nm Nominal torque (25%): 12 Nm Speed range: 50 – 30,000 rpm Axis A (Bar capacity Ø 40 mm) Spindle type: A4 Max. bar diameter: 40 mm Max. speed: 35 rpm Drive torque (nominal): 112 Nm Drive torque (max.): 238 Nm Resolution: 0.0001° Axis clamping (Axis A): Pressure: 70 bar Holding torque: 130 Nm Tool Changer Number of tool discs: 2 Positions per disc: 24 Max. tool weight: 1 kg Rotational speed: 60 rpm Max. tool diameter (adjacent positions occupied): 50 mm Max. tool diameter (adjacent positions free): 63 mm Max. tool length (from spindle nose): 95 mm Coulisse de Reprise Travel distance: 80 mm Feed force: 1700 N Tilting moment: 90 Nm Resolution: 0.0001° Hydraulic pressure for tilting motion: 100 bar Workpiece Manipulator Pneumatic vertical slide gate: Ø 25 mm Stroke: 710 mm Linear travel per motor revolution: 70.4 mm/rev Max. transfer speed: 60 m/min Max. workpiece weight: 5 kg Max. manipulator stroke: 1120 mm (2×560 mm) Max. vertical travel: 150 mm Part pick-up Ø/length: Ø 32 mm / 100 mm Part ejection Ø/length: Ø 32 mm / 100 mm Accuracy: +/- 0.05 mm Grip force: 45 N (at 6 bar) Max. gripper opening: 14 mm (2×7 mm) Pneumatic Equipment Operating pressure: 6 bar Hydraulic System Operating pressure: 95 – 105 bar Coolant System Coolant tank volume: 80 liters Chip pan volume: 30 liters Kinematic viscosity in operation: 10 – 15 cSt SCOPE OF DELIVERY Includes (not limited to): Willemin Macodel W 408 B machining center Extraction unit Fire suppression system Probe Coolant system Oil chiller Data backup Complete operator documentation Exact scope of delivery as per photo gallery No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: good (used), Year of construction: 2010, 3D Coordinate Measuring Machine Werth Video-Check-IP 400×200 3D CNC TECHNICAL DATA Manufacturer: Werth Model: Video-Check-IP 400×200 3D CNC Function: 3D Coordinate Measuring Machine Year of manufacture: 2010 Measuring range X-axis: 400 mm Measuring range Y-axis: 200 mm Measuring range Z-axis: 250 mm Max. workpiece weight: 30 kg Drives: Ball screw drives with servo motors Measuring systems: Incremental scales with 0.1 µm resolution Guides: Precision ball guides on all axes Illumination: Transmitted light, bright field and dark field reflected light with LED Optics: Zoom optics with zoom factor 0.2x–100x Camera: High-resolution CCD black-and-white camera Rsdpsxfluuofx Ag Asch Electrical connection: 230 V AC, 50 Hz Current consumption: max. 10 A Power: max. 1.5 kVA Noise level: < 70 dB(A) SCOPE OF DELIVERY Including (not limited to): 3D Coordinate Measuring Machine Werth Video-Check-IP 400×200 3D CNC Control panel Probes Fiber optic and reference standard sets Exact scope of delivery according to photo documentation The Werth Video-Check-IP 400×200 3D CNC is a high-precision coordinate measuring machine for optical and tactile metrology. With a measuring range of 400 x 200 x 250 mm, it offers versatile application options for quality assurance of a wide variety of components. The combination of high-resolution CCD black-and-white camera, powerful zoom optics and LED lighting ensures precise image capture and reliable results. Precision ball guides and servo drives guarantee high repeatability. The device comes with extensive accessories and is ideally suited for precise 3D measuring tasks in industrial and manufacturing environments. No guarantee is given for the correctness, completeness or currentness of the information provided.

Year of construction: 2003, condition: excellent (used), Schneeberger DMR Gemini CNC tool grinding machine TECHNICAL DATA Control: GE Fanuc 160, 5 axes simultaneous Software: Schneeberger Quinto Measuring system X,Y and Z axis: 0.1 μm A-axis: 0.0001° C axis: 0.0001° Grinding head Power: 15 kW speed: 50 - 10`000 rpm spindle nose: HSK 50 Rcedsmqni Aopfx Ag Aoh Max. wheel diameter: 250 mm Max. Number of grinding wheels: 6 Linear axes X-axis, travel: 380 mm feed speed: 20`000 mm/min resolution: 0,0001 mm gear ratio: 1 : 1 Power: 1,0 kW / 3 Nm Y-axis, travel: 300 mm feed speed: 5`000 mm/min resolution: 0,0001 mm Gear ratio: 24 :4 Power: 1,6 kW / 8 Nm Z-axis, travel: 280 mm feed speed: 20`000 mm/min resolution: 0,0001 mm gear ratio: 1 : 1 Power: 1,0 kW / 3 Nm Rotary axes C-axis: 210 ° Speed: 72 ° / s Resolution: 0,0001 ° Power: 1.6 kW / 8 Nm C` axis: +- 180 ° Speed: 90 ° / s Resolution: 0,0001 ° Infeed: Hydraulic A axis: +- 360 ° Speed: 225 ° / s resolution: 0,0001° Power: 1,0 kW Nose: ISO 50 Center height: 210 mm Dimensions and weight Length: 1700 mm Depth: 2270 mm Height: 2260 mm Weight: 8`000 kg We do not guarantee the accuracy, completeness and timeliness of the information.

Condition: good (used), Year of construction: 2010, Technical Specifications Manufacturer: Werth Messtechnik GmbH Model: Video-Check 800x400x200 3D Year of manufacture: 2010 Measuring range: 800x400x200 mm Control system: Operator console with joystick and function buttons Voltage: 230 V AC Frequency: 50 Hz Current consumption: max. 10 A Camera: High-resolution video technology Probes: Renishaw measuring probe Multi-sensor technology: Combined optical and tactile measurement Construction: Solid granite base SCOPE OF DELIVERY Includes, among others (list not exhaustive): Rcsdpsxfly Dsfx Ag Aeh • 3D measuring machine Werth Video-Check 800x400x200 • Operator console with joystick and function buttons • Probes Exact scope of delivery as per photo documentation The Werth Video-Check 800x400x200 is a high-precision 3D measuring machine for versatile applications in quality assurance. With its large measuring range of 800x400x200 mm, it is suitable for small to medium-sized components. The machine features multi-sensor technology that allows both optical and tactile measurements, offering maximum flexibility. The robust granite construction ensures the highest measurement accuracy and long-term stability. Thanks to the Renishaw probe, video camera, and convenient control via operator console, complex measuring tasks can be performed efficiently and reliably. No guarantee is given for the accuracy, completeness, or timeliness of the information provided.

Condition: good (used), STAR SV-32 CNC sliding headstock automatic lathe TECHNICAL DATA Main spindle, bar capacity: 32 mm Travel: 310 mm Spindle speed: 7000 rpm Spindle drive power: 7.5 kW Minimum resolution, C-axis: 0.01 ° Counter spindle, bar capacity: 32 mm Spindle speed: 7000 rpm Spindle drive power: 7.5 kW Rcjdpfx Agou Uicys Ajh Resolution, C-axis: 0.01 ° Turret: Number of tools: 10 of which driven: 10 Speed of the driven tools: 5`700 rpm Driven tools, power: 2.8 kW Tool carrier: Number of tools: 4 Of which driven: 3 Speed of the driven tools: 6'000 rpm Weight and dimensions: Weight: 3800 kg Dimensions: 2700 x 1400 x 2400 mm SCOPE OF OFFER U.A: (list not exhaustive) Control system: Fanuc Fire extinguishing system: Siemens Oil mist separator: Donaldson transformer High pressure pump Parts conveyor Chip conveyor Exact scope of supply according to photo gallery We assume no liability for the correctness, completeness and up-to-dateness of the information.

Condition: good (used), Year of construction: 1997, Rollomatic CNC 600 X Tool Grinding Machine Rsdjwf Nn Ispfx Ag Asch TECHNICAL DATA X-axis: 228 mm Y-axis: 177 mm Z-axis: 52 mm A-axis: -15 to 90° B-axis: -110 to 40° C-axis: 360° Resolution: 0.0001 mm Rapid traverse: 12 m/min Grinding spindle angle: 105° Power: 4.1 kW Speed: 2000 – 7200 rpm Max. grinding wheel diameter: 150 mm Dimensions: 2060 x 2032 x 1880 mm Weight: 3500 kg SCOPE OF OFFER Among other things: (list not exhaustive): Rollomatic CNC tool grinding machine, year of manufacture: 1997 Rollomatic Pick and Place Robot Exact scope of supply as per photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information provided.

Condition: good (used), Year of construction: 2006, TECHNICAL DATA Main drive Speed: Infinitely programmable: 18`000 rpm In set-up mode: 20 - 800 rpm Work spindle: Hollow shank taper: HSK-A63 Tool clamping: Hydraulic Feed drive Linear motor: X-axis AC servomotors: C, B, Y, Z Feed speed X, Y, Z: Up to 20`000 mm/min Rapid traverse Y, Z: 50 m/min X: 80 m/min B: 40 rpm C: 50 rpm Rcodpfx Ageu Hkb Re Ajh Position measuring system Resolution: C, B, X, Y, Z: 0.001 mm Position tolerance: C, B, X, Y, Z: 0.010 mm Working range X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: 0° to 161.955 ° C-axis: n x 360 ° Tool changer with double gripper Magazine slots: 120 Max. Tool diameter without free spaces: 80 Max. Tool diameter with free spaces: 130 Max. Tool length from spindle nose: 300 mm Max. Tool weight: 6 kg NC rotary table with swivel axis C-axis: Clamping surface rotary axis (mm): 500 x 380 mm Distance of T-slots / size: 63 / 14 H7 Centering bore: 30 H6 Max. Torque: 1491 Nm Max. Rotation of the table top: 50 rpm B-axis: Max. Swivel torque: 1864 Nm Swivel speed: 40 rpm Swivel range: 0° - 161.955 ° Input and display precision: 0.001 ° Weight: 420 kg Max. load: 200 kg Weight: Approx. 6800 kg Installation weight: Approx. 7500 kg Dimensions: 4170 x 3133 x 2560 mm SCOPE OF OFFER U.A: (list not exhaustive): Deckel Maho DMU 50 Evo CNC machining center Heidenhain iTNC 530 Tool breakage control Blum measuring probe Oil mist separator Fire extinguishing system High-pressure pump and belt filter system Chip conveyor Exact scope of supply according to photo gallery We assume no liability for the accuracy, completeness and up-to-dateness of the information provided