Used Gastronomy Resolution for sale (1,167)

Condition: ready for operation (used), Year of construction: 2019, HEUFT ONE: Metal Detection and Code Verification Conveyor System Model Heuft HBBNXZ72 YOM 2019 High sensitivity to ferrous and non-ferrous metals Stainless Steel Construction Full Container Checking System (A4) The devices of the new HEUFT ONE series set new standards in terms of detection accuracy, operational reliability and price / performance ratio during an in-line quality inspection in a confined space, and celebrated their world premiere at interpack. The first metal detector and an inspection system for markings up to HEUFT standards can be experienced live at the trade fair. Hnodeyq Rkyepfx Ag Iel ONE for all: the new products make an affordable introduction to HEUFT cutting edge technology as particularly compact stand-alone devices which are extremely easy to integrate into packaging lines. They combine innovative detection technologies with customised hardware and software and proven procedures for a highly precise product tracking, inspection and fault rejection. Thus the compact complete solutions remove contaminated products and incorrectly marked packaging accurately; food safety has priority! The HEUFT ONE for detecting metal achieves maximum detection accuracy with unique evaluation procedures from the HEUFT development department: it even finds minute pieces of metal in filled food packaging reliably – almost unaffected by the product effect of saline or acidic products and the influence of metal packaging components. Even special ambient conditions such as a "metal free zone" are not necessary for the reliable operation of the compact stand-alone device. The first HEUFT metal detector complements the portfolio of sophisticated systems, which identify all types of foreign objects, with a slim entry-level solution. It is ideal for all those who only wish to find objects made of iron, steel, aluminium or stainless steel first and want to achieve a detection and rejection reliability up to HEUFT standards. The new HEUFT ONE for code verification, marking and dress inspection also provides this during the high-resolution complete examination of food packaging with in-house developed colour sensor camera technology and real-time image evaluation. It detects best before and expiry dates, barcodes and 2D codes, article and serial numbers, imprints and lettering which have been incorrectly applied and are inaccurate as regards content – and that independent of their respective position. The same also applies to deviating logos as well as non-brand colouring and design elements. Proven HEUFT procedures also ensure the accurate removal of incorrectly marked products in this case. Full traceability, clear information about shelf-life and digestibility as well as an attractive appearance at the point of sale are thus always guaranteed. The solid, extremely compact construction in accordance with the hygiene-optimised HEUFT CleanDesign also makes the new HEUFT ONE devices stand out. They are straightforward to integrate into existing packaging lines even where space is limited. The HEUFT ISI bus ensures minimum wiring with the open, flexible assembly directly above the conveyor. Dispensing with change parts makes easy brand changes without mechanical changeovers possible and the organised user interface, which has been reduced to the essentials, ensures error-free operation. This together with continuous monitoring brings the metal detection and code verification in line with HEUFT standards.

Condition: excellent (used), Year of construction: 2015, The Heuft Reflexx – high speed empty bottle and label inspector. Model Reflexx HBBRTIXX Spectrum TX controller Capacity to 50.000 bph. YOM 2015 EXCELLENT CONDITION It’s more than just a quick check. The HEUFT system diligently inspecting empty glass bottles for any defects before they move on to be filled is comprehensive quality assurance that brings immense value to the entire bottling process. Here’s why these HEUFT inspection solutions are so critical: 1. Full Coverage, Zero Blind Spots: The system doesn’t just glance at the bottle; it performs an all-surface, all-angle inspection of the base, sidewalls, finish, and threads. This level of detail is vital for spotting tiny defects the human eye can easily miss. 2. Advanced Detection Technologies: Utilizing a powerful combination of high-resolution cameras, smart AI image processing, and in some models, patented pulsed X-ray technology. This includes: - Glass Defects: Cracks, chips, inclusions, and finish damage. - Foreign Objects: Everything from foil and cigarette butts to insects, residual liquid (like caustic lye or oil), and, most dangerously, glass splinters hidden in the bottle base. 3. Low False Reject Rate: Thanks to intelligent image analysis (like HEUFT reflexx A.I.), they can distinguish between a critical defect and a harmless cosmetic blemish, meaning you don’t waste good, perfectly usable bottles. Hjdpjytrdtefx Ag Ienl HEUFT SPECTRUM TX Controlling centrally: one platform for all requirements. Precise, network-compatible and cross-system: the HEUFT SPECTRUM TX forms the basis for different technologies, modules and functions. The devices of the generation of the same name can be exactly adapted to individual requirements on site and retrofitted at any time due to this universal platform.

Condition: excellent (used), functionality: fully functional, We offer the KOMET PowerVac 200 double-chamber packaging machine—a professional device for vacuum packaging food products in meat processing plants, food processing facilities, the food service industry, and food processing operations. This model belongs to the double chamber model series, i.e., two-chamber machines that perform well where smooth operation, high efficiency, and consistent seal quality are essential. KOMET PowerVac 200 has a chamber measuring 580 x 760 x 215 mm, and the maximum recommended bag size is 400 x 700 mm. As standard, the machine is equipped with 2 sealing bars, each 420 mm long. The machine operates on a 400V, 3Ph+N+PE, 50Hz power supply, with parameters of 4.807 A and 1.6698 kW. Technical specifications: Manufacturer: KOMET Model: PowerVac 200 Type: dual-chamber packaging machine Power: 1.6698 kW Power supply: 400V, 3Ph+N+PE / 50Hz, 4.807 A Chamber dimensions: 580 x 760 x 215 mm Seal length: 2 x 420 mm Maximum bag size: 400 x 700 mm Pump: 40 m³/h External dimensions with lid closed: 1340 x 900 x 1170 mm External dimensions with lid open: 1340 x 900 x 1450 mm Weight: 335 kg standard Key advantages of the KOMET PowerVac 200 packaging machine dual-chamber design for efficient vacuum packaging, chamber dimensions: 580 x 760 x 215 mm, Hedpfx Agoy Snpqs Ijnl wide double seal, stainless steel and durable construction, program-controlled operation with a sensor, a solution for facilities requiring repeatability and reliability.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 150 mm, travel distance Y-axis: 50 mm, type of input current: AC, measuring range X-axis: 150 mm, measuring range Y-axis: 50 mm, measuring range Z-axis: 103 mm, table length: 280 mm, table width: 152 mm, Equipment: lighting, Offered here is a profile projector from the manufacturer Mitutoyo. Manufacturer: Mitutoyo Model: PJ-A3000 Year of manufacture: 2013 X/Y measuring range: 150 × 50 mm Table size: 280 × 152 mm X-axis: 150 mm Y-axis: 50 mm Vertical profile projector / optical comparator Screen diameter: 315 mm (12.4") Image display: reversed / inverted Digital angle display with: 0.01° or 1′ resolution Measuring range: ±360° Illumination: Transmitted light + incident light Halogen lamps 24 V / 150 W Telecentric optics Standard lens: 10× Hodoy Sm E Dopfx Ag Ienl Contour illumination: ±0.1 % Incident light: ±0.15 % X/Y resolution: 0.001 mm (1 µm)

Year of construction: 2021, condition: like new (used), functionality: fully functional, machine/vehicle number: 37022, We offer this as-new Tagarno ZIP Microscope + LCD Monitor, year of manufacture 2021. Manufacturer: Tagarno Model: ZIP Year of manufacture: 2021 Condition: as new Category ID: 689 Type: Microscope + LCD Monitor Professional digital inspection system for quality control and PCB assembly. A high-quality digital microscope, TAGARNO model ZIP, is for sale. This device is ideal for precise inspection, repair, and documentation in electronics manufacturing or precision engineering. Technical details and highlights: * Resolution: Full HD (1080p / 60fps) for sharp, lag-free imaging. * Zoom: 30x optical zoom (plus digital zoom). * Working distance: Large clearance under the camera (approx. 250 mm), ideal for soldering. * Interface: HDMI output for direct monitor connection (no PC required). * Condition: Technically and visually perfect, very low operating hours. Scope of delivery: Hjdpfx Ajym Sulog Ionl * TAGARNO ZIP camera head * Original TAGARNO stand / frame (column) * Power supply unit and HDMI cable Several units available / quantity discount possible for bulk purchase. If you have any questions or need further information, please feel free to send us a message or contact us by phone.

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel 0.2 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display ensures easy and intuitive programming and operation. Once the tube is loaded, it is fixed in place by the chuck in the carriage, enabling precise tube positioning and the production of dimensionally accurate geometries. Standard features include tube geometry verification before the bending process: if the bending operation is initiated at an incorrect position, the machine will not grant approval, reliably preventing operator errors. Optional features offer greater convenience, increase output, and therefore improve the machine's efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is performed via USB stick or network. Existing tube geometries can be imported into the software. Standard equipment: → Servo drive for bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Maximum bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive feed → Servo drive rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control System: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB Hnsdjtr U Hlopfx Ag Isl → Foot pedal operation → Data transfer via LAN network or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. After inputting length and angle, the control automatically calculates the feed values and bending angles. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Condition: used, Year of construction: 2017, pipe diameter (max.): 80 mm, mandrel length: 4,500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate pipe geometries with bending radii of up to 1.5XD → maximum bending performance pipe 76 x 4 mm (400 N/mm²) → maximum bending performance pipe 60 x 60 x 3 mm (400 N/mm²) → maximum bending performance pipe 76 x 2.9 mm (stainless steel) → total connected load 7 kW → pipe length 4.5 mtr Robust and durable steel construction in a force-locking connection - no construction susceptible to torsion due to, for example, the split construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The touch display of the control enables simple and intuitive programming and use of the system. After the pipe has been pushed on, it is fixed in the carriage by the chuck. This enables the pipe to be positioned precisely and thus the creation of dimensionally accurate geometries. The standard also includes checking the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine does not give permission for this. This prevents incorrect operation. Optional additional features provide more convenience and increase the output and thus the efficiency of the system. Data is exchanged from the optional pipe calculation program TBS-3D (PC version) via USB stick or via FTP access from the computer to the machine control system. USB or LAN connectors (RJ45) are available as standard. Existing pipe geometries can be converted quickly and easily, for example, using the STEP format. Standard equipment: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec.) → Bending direction left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic twist measurement ±0.1° → Manual stop system (overtravel stops in length) → Manual locking system (15° in twist) → Three-jaw chuck for locking the pipe in the carriage → External control panel PLC control: → Touchscreen 10.1" → ETH 10/100, X2X Link, USB → Foot switch operation → Data transfer via network (W)LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control calculates the feed values directly after entering the length and angle and the bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic pipe clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (can be ordered as additional equipment): → Variable bending speed using frequency converters or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck Hedpfettah Rsx Ag Ionl → Automatic mandrel lubrication → Pneumatic stop system (length + twist) → Mobile version (rollers) → Radius extension Pictures show new machine

Year of construction: 2025, condition: used, functionality: fully functional, machine/vehicle number: ET1UA25015078612, This is an Ultravent hood manufactured by Rational, model UV 61/101/E, year of manufacture 2025. Suitable for iCombi classic and iCombi Pro units. The hood has been inspected in our in-house workshop and is in full working order, including the matching connection kit. RRP for the hood: €4,465 net You will receive an invoice with VAT shown separately. Service: We are happy to assist you in arranging a certified Rational customer service technician. Are you looking for a specific Rational device type? Contact us—we have access to a wide range of both used and new units. We are happy to advise you on all types of devices. Our used equipment service for you: - 6-month warranty on electrical components, limited to the replacement of defective parts (installation and removal costs excluded) - Premium branded equipment at fair prices - Professional refurbishment/inspection and expert cleaning - Tested & fully functional – or your money back - Flexible shipping or collection options Hnjdpfoy N Umwox Ag Iel - Competent advice – before and after the sale - Provision of operating manuals, wiring diagrams, and spare parts - DGUV V3 safety testing Technical Data: - W x D x H: approx. 854 x 885 x 313 mm - Electrical connection: V: 230 / Hz: 50-60 - Item no.: 60.75.134 - Serial no.: ET1UA25015078612 - Year of manufacture: 01/2025 Condition: Used, tested, fully functional Shipping: - Delivery or self-collection by arrangement - Worldwide shipping on request - Shipping to islands or mountain locations only by arrangement Subject to change and errors excepted. Do you have questions, require advice, or want to inspect something on site? You can reach us by phone during our business hours: Monday–Friday 09:00–13:00 and 14:00–17:00. Sales are exclusively subject to our general terms and conditions (GTC).

Condition: good (used), Year of construction: 2009, functionality: fully functional, CNC Sliding Head Lathe Manufacturer: Traub Machine Model: TNL 12 Control: Traub Year of manufacture: 2009 TECHNICAL DATA Headstock - Max. bar diameter (mm): 12.7 - Bar stock tolerance (DIN 671) (mm): Ø Xh9 - Max. spindle speed (rpm): 12,000 Max. turning length / headstock stroke - With fixed guide bush (mm): 130 - With rotating guide bush (mm): 80 - With programmable guide bush (mm): 80 C-axis resolution (degrees): 0.001 Hnsdpfx Aoy N A S Usg Iel Rapid traverse Z1 (m/min): 30 Tool carrier 1 - X1 axis travel (mm): 35 - Y1 axis travel (mm): 38 (-10 +28) - Rapid traverse X1/Y1 (m/min): 15 - Chip-to-chip time (s): 0.3 Tool carrier 2 - X2 axis travel (mm): 35 - Z2 axis travel (mm): 50 - Rapid traverse X2/Z2 (m/min): 15 - Chip-to-chip time (s): 0.3 Tool drive for tool carriers 1 and 2 - Max. speed (rpm): 8,000 - Max. number of driven tools: 2xG - Clamping diameter for drilling tools (mm): 0.5–7 Sub-spindle / Front attachment - Max. bar diameter (mm): 12.7 - Max. longitudinal stroke 23, 24 / Xg (mm): 140 / 228 - Rapid traverse 23,24/X3 (m/min): 30 - Tool positions (number): 4 - Max. speed (rpm): 12,000 - C-axis resolution (deg): 0.001 Rear attachment, driven / fixed - Z travel, driven with work spindle (mm): 80 - Tool holder diameter (mm): 20 - Tool positions (number): 3 Rear attachment (X4 axis) - X4 travel (mm): 39 - Rapid traverse speed (m/min): 15 - Tool holder diameter (mm): 28 - Tool positions (number): 4 Tool drive for rear attachment (with X4 axis) - Max. speed (rpm): 10,000 - Max. number of driven tools: 4 - Clamping diameter for drilling tools: - Driven (mm): 0.5–7 - Non-driven (mm): 0.5–10 Coolant system - Single-stage pump pressure (bar): 3 - Tank capacity (l): 180 - Delivery rate (l/min): 40 EQUIPMENT FEATURES - Chip conveyor - FMB Minimag 18 bar feeder - High-pressure system - Fire suppression system Subject to changes and errors in technical data and specifications.

Condition: good (used), Year of construction: 2007, functionality: fully functional, CNC Swiss-type Lathe Manufacturer: Traub Machine Model: TNL 12 Control: Traub Year of Manufacture: 2007 TECHNICAL DATA Spindle Head - Max. bar diameter (mm): 12.7 - Material quality (DIN 671) (mm): Ø Xh9 - Max. spindle speed (rpm): 12,000 Max. machining length / spindle stroke - With fixed guide bushing (mm): 130 - With rotating guide bushing (mm): 80 - With programmable guide bushing (mm): 80 C-axis resolution (degrees): 0.001 Rapid traverse Z1 (m/min): 30 Turret 1 - X1 axis travel (mm): 35 - Y1 axis travel (mm): 38 (-10 +28) - Rapid traverse X1 / Y1 (m/min): 15 - Chip-to-chip time (s): 0.3 Turret 2 - X2 axis travel (mm): 35 - Z2 axis travel (mm): 50 - Rapid traverse X2/Z2 (m/min): 15 - Chip-to-chip time (s): 0.3 Tool Drive for Turret 1 and 2 - Max. speed (rpm): 8,000 - Max. tools (number): 2xG - Clamping diameter for drilling tools (mm): 0.5-7 Sub-Spindle / Front Attachment - Max. bar diameter (mm): 12.7 - Max. longitudinal stroke 23, 24 / Xg (mm): 140 | 228 - Rapid traverse 23,24/X3 (m/min): 30 - Tool stations (number): 4 - Max. speed (rpm): 12,000 - C-axis resolution (degrees): 0.001 Backworking Attachment (dragged / fixed) - Z stroke, dragged with work spindle (mm): 80 - Holder diameter for tools (mm): 20 - Tool stations (number): 3 Backworking Attachment (X4 axis) - X4 travel (mm): 39 - Rapid traverse speed (m/min): 15 - Holder diameter for tools (mm): 28 - Tool stations (number): 4 Tool Drive for Backworking Attachment (with X4 axis) - Max. speed (rpm): 10,000 - Driven tools max. (number): 4 - Clamping diameter for drilling tools - driven (mm): 0.5 - 7 Hnsdjy N A Atepfx Ag Iol - non-driven (mm): 0.5 - 10 Coolant System - Single-stage pump pressure (bar): 3 - Tank capacity (l): 180 - Pump delivery rate (l/min): 40 EQUIPMENT FEATURES - Chip conveyor - FMB Minimag 18 bar feeder - High-pressure coolant system - Fire extinguishing system Subject to changes and errors in technical data and specifications.

Year of construction: 2023, condition: used, functionality: fully functional, The iCombi Pro is the latest combination oven from RATIONAL. The iCombi Pro 20.1/1 Gas model with 20 GN 1/1 shelves is easy to operate, even for untrained personnel, ensuring outstanding food quality without the need for constant supervision. The ultra-fast intermediate and self-cleaning functions keep your unit spotless. The unit has been inspected by our in-house specialist workshop and is in full working order. The combi oven has only 552 operating hours. You will receive an invoice with VAT shown separately. Service: We are happy to assist you in arranging a Rational service technician. Looking for a specific Rational appliance? Contact us—our extensive selection includes used and new equipment. We are happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, or iCombi Classic and Pro. Hnjdpfx Asy Nycwog Ijl Our equipment service for you: — 6 months warranty on all electrical parts, covering replacement of defective parts only (excluding labor) — High-quality branded equipment at fair prices — Professional and competent advice—before and after purchase — Flexible shipping or self-collection options — Provision of user manuals, connection diagrams, and spare parts — Complete range of accessories at attractive prices The iCombi Pro by Rational sets the new standard for intelligence, efficiency, and flexibility. Condition: Used, inspected, and fully functional. Technical data: — Dimensions (W x D x H): 877 x 913 x 1872 mm — Minimum door opening for transport (W x H): 900 x 1900 mm — Serial number: G21SJ23083079345 — Year of manufacture: 2023 — Max. load per shelf: 5 kg — Max. total load: 100 kg — Weight (gas unit): 273 kg Electrical connection requirements: — Voltage: 1 NAC 230 V Gas connection rating: 42 kW Fuse: 16 A Water connection requirements: — Water supply (pressure hose): 3/4 inch — Waste water outlet: DN 50 Shipping: — Delivery or self-pickup by arrangement — Worldwide shipping available on request — Shipping to islands or mountain stations by arrangement only Do you have questions, need advice, or would like to view an item in person? You can reach us during our business hours: Monday–Friday 09:00–13:00 and 14:00–17:00. Sales are made exclusively in accordance with our general terms and conditions (GTC). Subject to change and errors excepted.

Year of construction: 2006, condition: excellent (used), Dispensing hot food products is normally associated with a number of health and safety risks. These risks are minimized with a fully automated dispensing system. The controls make sure that the operator avoids any direct contact with the 90°C hot product. The automatic bag-packing unit seals the bags once they are filled. Furthermore the need for lifting products over long distances is reduced since the ready packaged dishes are transported from the filling station to the operator via a small conveyer belt. This prevents inappropriate working positions. HOT-FILL DOS 3 ensures uniform portions. The quantity is controlled via the touch- screen display. The display also controls how quickly the product is to be dispensed allowing for flexibility in the workflow. Hsdpjh A Hbxsfx Ag Ionl The fully automated HOT-FILL DOS 3 sucks the product directly from the kettle and is fitted with a temperature alarm consistently ensuring the correct temperature of the product.

Condition: used, mileage: 59,986 km, power: 125 kW (169.95 HP), first registration: 04/2023, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 6,967 mm, total width: 2,020 mm, total height: 2,616 mm, loading space length: 4,307 mm, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Subject to errors and prior sale! Internal number: 1043. P575696 ----EQUIPMENT * Cup holder at front * Airbag on passenger side * Trailer coupling - for increased trailer load 3.5t * 13-pin trailer socket in conjunction with generator 14 V/250 A * Tachograph operation at front under roof lining * Seats: passenger seat two-seater * Brake assistant, active * Ceiling light in loading/passenger compartment - with door contact * Anti-theft alarm system and burglar alarm system * Diesel filler cap in red * PSM standard contact extension * Misfueling protection * Generator 14 V/250 A * Seat belt warning device for passenger seat * Grab handle for driver and passenger entry * Wooden floor (loading area) * Interior paneling of loading area up to roof height - wood * Intelligent tachograph EU * Air conditioning controlled Tempmatic * Comfort roof control unit * LED light strip in loading area * Load securing: Lashing rails on side wall on roof frame * Load anchoring rail system * Cable duct on rear portal * Cable duct on side wall * MBUX multimedia system with 7-inch touchscreen High-resolution 7-inch touchscreen (960 x 540 pixels) AM/FM radio with double tuner Bluetooth connectivity with audio streaming and hands-free function Smartphone integration via Android Auto or Apple CarPlay Multimedia connection unit for connecting portable devices via a USB-C interface 4 x 25 W output power, sound adjustment, separate volume adjustment for audio and telephone 2-way loudspeakers at the front * Steering wheel: Multifunction steering wheel * Package: Charging package for instrument panel The charging package expands the charging options in the cockpit with two 5V USB-C ports and a 12V socket. A USB port and the 12V socket are installed in the middle storage compartment of the instrument panel and another USB port in the lower area of the center console. This allows electrical devices such as mobile phones to be charged within reach of the driver and passenger. * Package: Parking package with rear view camera * Cross member with step * Radio: Digital radio DAB * Wheel arch can be loaded * Rain sensor * Spare wheel holder with jack - under frame end * Rear door with two wings, opening to the side wall * Seats: Comfort version suspension seat, driver's seat * Seats: Driver's seat box, low * Seat heating on driver's side * Cruise control * Partition wall with 1 window * USB 5 V socket * Load securing: Lashing rails on side wall on parapet belt * Front axle with increased load capacity * Pre-installation for electrics, parameterizable special module * Heat-insulating glass with band filter on windscreen * ADAPTIVE ESP * Storage above windscreen * Storage compartment under cockpit * Towing eye at the rear * Axle ratio i = 3.923 * Driver's side airbag * Electric adjustable and heated exterior mirrors * Outside temperature display * Hill start assist * Brake light, third * Brake lights, adaptive * DPF, SCR * Tachometer * Entry handle on corner pillar, rear right * Driving light assistant * Chassis stabilization level I * Electric window lifter, front * Noise reduction measures * Gearbox: 9G-TRONIC * Seat belt warning device * HOLD function * Grab handle for loading area sliding door * Main tank 71 liters * Instrument panel and instrument cluster Hnsdpfx Aoy Nvcmjg Ijl * KEYLESS start * Child safety lock on the rear doors * Headrests * Paintwork: Uni * Steering wheel, vertical and axial * Headlight range adjustment * Marker lights, side * Mercedes-Benz emergency call system * Without l

Year of construction: 2019, condition: used, Used machine Hjdpfsy Nugqjx Ag Isnl Year of manufacture: 2019 - One print bed with a format of 2500 x 1300 mm or 2500 x 3100 mm (model 2531) - High speed: Prints up to 25 m²/h or up to eight sheets/h (color configuration 4C) in 2440 x 1220 mm format, and up to approx. 12.5 m²/h (color configuration 4C+W) with simultaneous white printing - New ink supply system: The 1-liter ink bottles can be easily replaced from the front — refilling is much faster! - Simple operation — no alignment issues: Equipped with alignment pins and a printed measuring scale for precise media positioning on the print table. The register pins secure the media against shifting. The measuring scale makes it easy to adjust layout and RIP data to the exact position. - Increased flexibility with direct print on thick media: Prints on boards up to 50 mm in thickness - Reduced banding thanks to Mimaki Advance Pass System - Special Mimaki circulation system prevents settling of white ink - Mimaki Clear Control (MCC): For glossy surfaces — to avoid dust adhesion and the formation of small air bubbles, MCC simultaneously reduces ink drying time and UV light exposure. This enables both glossy and stylish matte finishes. In addition, multiple layers of clear varnish can be applied for embossed, multidimensional effects. - Convenient ink options: - LH-100 rigid UV inks for all smooth surfaces with high scratch resistance, color brilliance, and solvent resistance - LUS-150 flexible UV inks for smooth and uneven surfaces, approximately 150% stretchability, making them suitable for a wide variety of substrates - White ink for image backing reduces light transmission - Two-layer printing with white on clear and colored substrates - Print finishing with gloss or matte varnish options - Environmentally conscious printing: No harmful emissions due to UV print technology. Lower power consumption and longer lifespan thanks to UV-LED lamps - RasterLink 6: - Powerful RIP supports outstanding color reproduction - Various print jobs can be easily nested - Simple and user-friendly interface - Intuitive icons help with quick orientation - Thematically related RIP settings are grouped in a single window and can be saved as favorites for repeated use - The print process is monitored directly in the main window - Software can be updated at any time via the internet, and profiles can be downloaded or updated. Printing method: Piezo inkjet Print heads: 2 heads in staggered arrangement Max. print format (W x L): 2500 × 1300 mm Max. media size (W x L): 2500 × 1300 mm Max. media thickness: 50 mm Max. media weight: 50 kg with even weight distribution Print resolutions: 300, 450, 600, 900, 1200 dpi Media hold-down: Vacuum Number of vacuum zones: 2 sections (on the X-axis) Accuracy (absolute): ± 0.3 mm or ± 0.3% of the specified distance (the larger value applies) Repeatability: ±0

Condition: new, Renishaw SA26DBA104B30S Resolute FS measuring head Siemens 26BIT / 104DIA 3.0M M12 , serial no. according to photo ,unused in original packaging, 100% functional, scope of delivery according to photos Hnsdpsi Ecm Nofx Ag Iel

Condition: like new (used), Year of construction: 2021, operating hours: 6,133 h, functionality: fully functional, feed length X-axis: 2,000 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 2,000 mm, travel distance X-axis: 620 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, quill travel distance: 80 mm, spindle speed (max.): 4,500 rpm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, table length: 820 mm, table width: 420 mm, total height: 1,800 mm, total length: 2,435 mm, total width: 1,875 mm, rotational speed (max.): 1 rpm, rotational speed (min.): 4,500 rpm, overall weight: 1,970 kg, table load: 350 kg, Equipment: rotational speed infinitely variable, Universal Milling and Drilling Machine High-quality, robust machine with high precision, long service life, and maximum operator comfort. Multi-ribbed cast construction ensures full operational performance throughout the entire working area. Control System SIEMENS 840D SL Path Control Working Area X / Y / Z 620 / 350 / 400 mm Drive System 2-stage, high-torque main gearbox with automatic gear shifting Drive power 100% / 25% duty cycle: 5.5 / 7.0 kW Torque 100% / 25% duty cycle: 210 / 340 Nm Infinitely variable speed range 0 - 4500 rpm Digital Feed Infinitely adjustable feed on all axes. Feed range 0 - 2000 mm/min, infinitely variable Rapid traverse 5 m/min Handwheel resolution 2.5 mm (X / Y / Z axis) Milling Head - Vertical Vertical milling head swivels +/- 90° (180°) Extendable vertical quill incl. manual clamp, 80 mm Tool holder SK 40 DIN 69872 Hydromechanical clamping system DIN 69872 – Standard Additionally, milling head is movable along Y-axis by 150 mm. For horizontal machining, the milling head does NOT need to be removed—simply slide it into its rear rest position. Fixed Angle Table Clamping surface 820 x 420 mm T-slots: 1 / 14 H7 reference slot 5 / 14 H12, 63 mm spacing Table load capacity: 350 kg Hsdpoy R Tctsfx Ag Isnl Standard Equipment Direct linear measuring systems on all axes Wear-free digital drive, infinitely variable on all axes Main spindle motor with spindle speed brake function Oriented spindle stop; vertical and horizontal spindle for tapping cycles without compensation chuck Swiveling milling head with extendable quill Automatic axis feed in X, Y, Z with rapid traverse Mechanical safety handwheels with graduated scale rings on all axes Precision ball screws on all axes Electronic overload protection on all axes 2-channel emergency stop system Control cabinet compactly integrated into machine Splash guard cabin with optimal, user-friendly access Safety glass window at the rear of the cabin Open at top—front and right doors, including sliding door at the front with safety interlock Interlocked when unpowered; additional service opening on left cabin side—bolted, removable Freestanding mobile coolant tank, 80 liters Dimensions (LxWxH): 1250x460x200 mm Automatic central lubrication Steel lamella cover for Z-axis guide protection Halogen machine lamp, 24V Easy-to-operate milling guard with plexiglass pane Operator's manual, spare parts list, and electrical diagram in paper form Set of machine feet Transport bar and retaining rings for 2-strand lifting tackle Color: light gray RAL 7035 and telegray RAL 7045, fine texture Space Requirement – Connection Values Machine weight approx. 1970 kg Footprint (W x D): 2435 x 1875 mm Power supply: 3x400 V AC 50Hz Power consumption: 17 kVA Max. fuse protection: 35 A NH Network type: TN-S Connection type: fixed connection Further information available in the PDF attachment. The machine is supplied without tools and without accessories.

Condition: new, Year of construction: 2025, color: grey, Container Description Our offer includes a complete package of high quality, making it unbeatable. We source the gas appliances exclusively from qualified manufacturers of high standards. The construction and the entire kitchen with all equipment are NEW! Container Details Availability: Ready for immediate delivery Color: Anthracite Delivery is included in the price, delivery to the curbside. Structure is made from isothermal aluminum-fiberglass laminate with excellent aesthetic appearance. Guarantees optimal interior temperature year-round. Dimensions Internal length: 5,898 mm Internal width: 2,352 mm Internal standing height: 2,385 mm Two new containers are for sale: Container 1: Empty – ideal for individual use or custom conversion The water system opening, circuit breaker box, two serving hatches, and ceiling lighting are already installed (see final images in the gallery). Price: €25,000 net Warranty: 1 year warranty on body and electrical system. This price applies to the standard configuration shown. Changes or additions will incur additional costs. Container 2: Fully equipped with professional foodservice equipment – ready to use, perfect for street food Price with equipment listed below: €39,500 net. Gastronomy Equipment; Kitchen made of stainless steel Gas Appliances: • Bertos gas cooker with 2 burners, dimensions (W x D x H) 300 x 600 x 290 mm, output: 6.2 kW, made of stainless steel, G6F2B • Bertos gas grill, smooth plate, dimensions (W x D x H) 600 x 600 x 290 mm, output: 8 kW, made of stainless steel, G6FL6B • Bertos gas fryer, 2 x 8-litre basins, dimensions (W x D x H) 600 x 600 x 290 mm, output: 13.2 kW, made of stainless steel, with drain tap, GL8+8B Gas cabinet for 3 x 11-litre propane gas cylinders Refrigeration • Under counter refrigerator ‘Liebherr’ • Combination refrigerator Liebherr Water System • Water system with canisters, 30-litre capacity with fresh and waste water containers • Two stainless steel sinks with fittings • Hygiene package with paper towel dispenser and soap dispenser • 10-litre hot water boiler • Pump Lighting • LED ceiling lighting • LED lighting with color effects around the serving hatch, remote-controlled • Emergency light Additional fittings • Serving and work surfaces made of brushed stainless steel • Two serving hatches Hnodpey R S Ubefx Ag Ijl • Insulated partition at the cooking area (fire-resistant) • Extractor hood with labyrinth filters • Anti-slip flooring for commercial kitchens • Sneeze guard (optional) • Side door entry • Generator cabinet Warranty: 1-year warranty on body and kitchen This price applies to the standard configuration shown. Changes or additions will incur additional costs. We can also build this model to your custom specifications. Delivery time up to 6 months. Do you need different equipment for this sales vehicle? Does your equipment require a higher payload or more serving hatches? Many vehicle details can be customized to your specifications!

Condition: new, Year of construction: 2025, color: grey, Snack container for self-fit-out Container Description Our offer includes a comprehensive package of high quality, making it unbeatable. We source our gas appliances exclusively from certified manufacturers with high standards. The container structure and the entire kitchen equipment are NEW! Sea Container Specifications Availability: Ready for immediate delivery Colour: Anthracite Delivery included in the price, delivery to curbside. Construction made of isothermal aluminium-fiberglass laminate with excellent aesthetic appeal. Guarantees optimal interior temperature all year round. Dimensions Internal length: 5,898 mm Internal width: 2,352 mm Internal height: 2,385 mm Gastronomy Fittings; Kitchen for self-fit-out Water system inlet Distribution box Two sales hatches Ceiling lighting Warranty: 1-year warranty on structure and electrical system. The stated price applies to the pictured standard specification. Hnsdpfey R S T Dex Ag Iol Additional costs apply for changes or upgrades. We can also build this model differently or to your chosen specification. Please contact us and we will provide you with a quote.

Condition: new, Year of construction: 2025, color: grey, Container description Our offer includes a complete package with high quality and is therefore unbeatable. We only purchase gas appliances from qualified, high-quality manufacturers. The construction and the entire kitchen with the equipment are NEW! 1. information about the container Availability: Delivery time immediately Color: Anthracite Delivery included in the price, delivery to the edge of the shelf. 2. structure made of isothermal aluminum fiberglass laminate with excellent aesthetic appearance. Guarantees optimum interior temperature in all seasons. Dimensions Total length: 3000 mm Total width: 2000 mm Overall height: 2300 mm 3. gastronomic equipment; kitchen made of stainless steel and wood Gas appliances Gas grill "Bertos" , smooth plate, dimensions (W x D x H) 600 x 600 x 290, power: 8 kW, made of stainless steel, G6FL6B Gas deep fryer "Bertos" , 2 x 8 liter bowl capacity, dimensions (W x D x H) 600 x 600x 290, power: 13.2 kW, made of stainless steel, with drain tap, GL8+8B Gas cabinet for 2 x 11 liter propane gas cylinders Cooling options Small under-counter refrigerator "Liebherr" Refrigerator with glass front, also suitable for drinks Water system Water system with water canisters, 30 liter capacity with fresh and waste water canisters Two stainless steel washbasins with fittings Hygiene package with folded towel dispenser and soap dispenser 10-liter hot water boiler Pump Hedpfjy R S Tqox Ag Ionl Lighting LED lighting on the ceiling LED lighting with color play around the sales hatch with remote control Emergency light Further equipment Brushed stainless steel serving surface and work surfaces Insulating wall at the hob (fireproof) Extractor hood with labyrinth filters Non-slip floor for gastronomy Optional spit protection Access through a side door Warranty 1 year warranty on body and kitchen This price applies to the standard equipment shown. Changes or additions will incur additional costs. Of course, we can also build this model differently! Delivery time is 6 months. Do you need a shorter or longer version of this model? Do you need different equipment for this sales trolley? Does your equipment require a higher payload or more sales flaps? You can determine many vehicle details yourself!

Condition: new, empty load weight: 1,700 kg, overall weight: 3,500 kg, color: grey, Year of construction: 2025, Equipment: hydraulics, A Contrailer is a perfect combination of a food truck and a container, offering you flexible usage options, ample space, and increased load capacity for the catering sector. You can use the Contrailer either as a stationary unit (like a container) or transport it flexibly to any location with a vehicle. Setting down the unit is easily accomplished via a hydraulic system. Our offer includes a comprehensive package of superior quality, making it unbeatable. All gas appliances are sourced exclusively from certified manufacturers renowned for high quality. The body structure and the entire kitchen, including equipment, are BRAND NEW! Color: Anthracite Body constructed from isothermal aluminum fiberglass laminate with an excellent aesthetic appearance. Ensures optimal interior temperature throughout all seasons. Body dimensions: Total length: 4,450 mm Total width: 2,400 mm Total height: 2,495 mm Vehicle Equipment - Gas Grill "Bertos", smooth plate, dimensions (W x D x H) 600 x 600 x 290 mm, output: 8 kW, stainless steel construction, model G6FL6B - Gas Fryer "Bertos", 2 x 8-liter tank capacity, dimensions (W x D x H) 600 x 600 x 290 mm, output: 13.2 kW, stainless steel, with drain valve, model GL8+8B - Gas Cooker "Bertos" with 4 burners, dimensions (W x D x H) 600 x 600 x 290 mm, output: 12.4 kW, stainless steel construction, model G6F4B Cooling Hodoy R S Tkepfx Ag Ionl - Compact undercounter refrigerator "Liebherr" - Display fridge with glass front, suitable for beverages, "Klarstein" - Refrigerator with integrated chest freezer "Liebherr", 340-liter capacity Water System - Water system with canisters, 30-liter capacity with separate fresh and waste water tanks - Double stainless steel sink with faucet - Hygiene package including a foldable towel dispenser and soap dispenser - 10-liter hot water boiler - Pump Additional Features - Service counter and work surfaces made of brushed stainless steel - Insulated partition wall at the cooking area (fire-resistant) - Extractor hood with labyrinth filters - Non-slip flooring for gastronomy - Sneeze guard available as an option

Condition: new, machine/vehicle number: 6750, power: 125 kW (169.95 HP), fuel type: diesel, overall weight: 3,500 kg, color: black, gearing type: mechanical, number of seats: 3, Vehicle Description Fully equipped new food truck with a brand new kitchen. We offer flexible hire-purchase and leasing options. Please contact us. The vehicle is new and the kitchen has been built with great attention to detail. It is our mission to convert new and used vehicles into food trucks in accordance with regulations. Today, we are proud to say that our years of expertise have convinced our customers of the quality of our work. Visit us and experience the quality of our vehicles for yourself! Body construction made from isothermal aluminum-fiberglass laminate with an excellent aesthetic appearance. Ensures optimal interior temperature throughout the year. Permissible gross weight: 3,500 kg, Driving license class: B Emissions standard: Euro 6 Environmental badge: 4 (Green) Parking sensors Summer tires Catering equipment, kitchen made from stainless steel Gas appliances: Gas fryer “Bertos”, 2 x 8-liter basins, dimensions (W x D x H) 600 x 600 x 290 mm, output: 13.2 kW, made of stainless steel, with drain tap, GL8+8B Gas stove “Bertos” with 4 burners, dimensions (W x D x H) 600 x 600 x 290 mm, output: 12.4 kW, made of stainless steel, G6F4B Gas griddle “Bertos”, smooth plate, dimensions (W x D x H) 600 x 600 x 290 mm, output: 8 kW, made of stainless steel, G6FL6B Cooling options: Refrigerator with glass front, suitable for beverages Small under-counter refrigerator "Liebherr" Water system: Water installation with canisters, 30-liter capacity with fresh and waste water tanks Two stainless steel sinks with fittings Hygiene package with paper towel dispenser and soap dispenser 10-liter hot water boiler Pump Lighting: LED ceiling lighting LED ambient lighting with color effects around the sales hatch, remote-controlled Emergency light Additional equipment: Serving counter and work surfaces made of brushed stainless steel Fire-resistant insulation wall at the cooking area Extractor hood with labyrinth filters Slip-resistant gastronomy flooring Sneeze guard (optional) Built-in insulated generator cabinet We take care of all required paperwork (TÜV inspection and certification) Warranty: One-year warranty on body and kitchen Manufacturer’s warranty from Renault This model can of course be customized! Need a shorter or longer version of this model? Need different equipment for this sales vehicle? Does your equipment require a higher payload or additional sales hatches? Hedpfxsy R S S Ho Ag Ijnl You can determine many vehicle features yourself!

Condition: used, Digitaldruckmaschine - Digital Printing Machine HP Indigo 5500 Year 2007- Serial-No. 30005331 Printing speed 68 4-color 8.5 x 11 in images per minute (two-up); 136 2-color and 8.5 x 11 in images per minute (two-up) Hedpfx Agey Nmhgs Ienl Image resolution 812 dpi at 8 bit, 812 x 1624 dpi in High Definition Imaging Line screens 144, 160, 175, 180, 230 lpi Paper format 13 x 19 in maximum Image format 12.12 x 17.7 in Paper weight* Coated: 55 lb text - 130 lb; Uncoated: 40 lb text - 120 lb; Thickness: 3-16 pt Paper input system • Two drawers with 7 in depth each each (1800 sheets of 3-16 pt) • A total of 3600 sheets of 80 lb. text. • All paper drawers support the full range of substrates Paper output system • Autoduplex/autoperfecting standard • Main stacking tray with 23.6 in stack height with job offset stacking (6000 sheets of 80 lb text) • Proof tray with 2.36 in stack height (600 sheets of 18 lb text) Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2019, condition: refurbished (used), functionality: fully functional, This is a VCC (Vario Cooking Center) 112 L with 2 x 25 liter pans, Dynamic version – energy-saving due to its reduced power rating (21 kW) from the premium manufacturer Rational, year of manufacture 2019. The VCC is offered complete with the undershelf and accessories as shown. The unit has been completely overhauled in our in-house workshop and is in full working condition. You will receive an invoice showing VAT. Service: We are happy to assist you in finding a certified Rational service partner anywhere in Germany. Looking for a specific Rational unit? Ask us – we have access to an extensive range of used and new equipment. We’re happy to advise on all model types, whether SCC, CM, CMP, VCC, iVario, or iCombi Classic and Pro. Our used equipment service for you: • 6 months warranty on electrical components, limited to replacement of defective parts (excluding removal/installation costs) • High-quality branded equipment at fair prices • Professionally refurbished/inspected & expertly cleaned – tested and fully functional – or your money back • Flexible options for shipping or collection • Expert consultation – before and after your purchase • Provision of user manuals, wiring diagrams, and spare parts • DGUV V3 safety inspection performed The Vario Cooking Center MULTIFICIENCY® combines the functions of conventional cooking appliances such as stove, griddle, fryer, tilting pan, and kettle – all in one unit. Technical Data: • W x D x H: approx. 1100 x 930 x 1100 mm • Power connection: V: 400 / kW: 21 / Hz: 50 • Weight: approx. 132 kg • Year of manufacture: 2019 • Serial number: E13VJ19038038896 Hodey Nkfcjpfx Ag Ijnl Condition: used, refurbished, fully operational Additional Information: • Core temperature probe • VarioDose – integrated water inlet • Integrated water drain • Anti-burn-on protection • Non-heated side panels • VarioBoost® heating system reaches 200°C in 2.5 min • Integrated hand shower • Meals per day: 50-100 • Net capacity 2 x 25 liters • Dynamic version – energy-saving due to reduced power rating Shipping: • Delivery or self-collection by arrangement • Worldwide shipping available on request • Shipping to islands or mountain stations only by arrangement Subject to change and error. Do you have questions, wish to arrange a consultation, or would like to inspect the equipment onsite? You can reach us by phone during our business hours: Monday–Friday 09:00–13:00 and 14:00–17:00. All sales are subject exclusively to our general terms and conditions (AGB).

Year of construction: 2004, condition: ready for operation (used), travel distance X-axis: 350 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 200 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 810D Powerline, overall weight: 1,800 kg, total width: 1,800 mm, total height: 2,000 mm, spindle motor power: 4,000 W, product length (max.): 1,800 mm, spindle speed (max.): 8,000 rpm, number of axes: 2, Cylindrical grinding machine manufactured in 2004. This AVYAC NC240 features a maximum tool diameter of 40 mm and a sharpening length of 950 mm. It is compatible with HSS and carbide materials, equipped with an automatic touch probe for precise tool positioning. The machine also includes programmable indexing for variable teeth/flutes and an integrated oil mist extractor for effective mist control. If you are looking to get high-quality grinding capabilities, consider the AVYAC NC240 machine we have for sale. Contact us for further details. • A (workhead rotation): 360° continuous • B (pivot): -45° to +45° • C (grinding wheel incline): 360° • Workpiece capacity: • Diameter range: 2–40 mm • Max length: 300 mm • Grinding wheel diameter: 150 mm • Number of CNC axes: 4 (A, B, C, X) + 1 manual (Y) • Resolution: 0.001 mm / 0.001° Hnedpfxeyux T Rs Ag Isl • Positioning accuracy: ±0.005 mm • Utilities: • Power supply: 400 V / 50 Hz • Compressed air: 6 bar (87 psi) • Coolant tank capacity: 150 L

Condition: good (used), Year of construction: 2016, AGFA TITAN 3020 industrial flatbed printer Format: 3 m x 2 m Resolution: 7p-1200 dpi Colours: 6C + White Hedpfx Agsy R Dmvs Ionl Speed up to 224 m²/h Under Agfa full service