Digital pigment textile printer

Kornit Allegro

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 828-043, total width: 1,800 mm, number of ink cartridges: 8, color channels: 7, number of print heads: 64, The Kornit Allegro is a powerful textile printing machine that offers outstanding print quality, high speed and versatility. It is particularly suitable for textile printing companies that want to produce first-class prints in large quantities (roll-to-roll) on a wide variety of fabrics. To date, it has been used primarily for cotton fabrics: jersey, French terry, cotton woven fabrics, canvas, sweat and viscose & modal qualities. For sale due to business downsizing. The textile printing machine is currently still in operation and can be viewed at any time by appointment. The following are available for sale with the machine: main and backup air compressors, dryer, unwinder & rewinder. So a complete production line. We are also selling all available spare parts, colors, etc. Technical specifications: Ink type: Kornit NeoPigment Intenso, water-based Ink capacity: 4 liters Colors: Cyan, magenta, yellow, black, red, green, gray Print heads: 64 x Spectra Polaris, recirculating - (7 color channels, 1 channel for pre-treatment) Print width up to 180 cm Print speed: Up to 200m²/ hour Print modes: Multiple print modes from 400-1200 dpi Recommended print mode: 600 x 600 dpi in 6 passes in interlaced mode Weight: 3500 kg Power supply: 110/220V, 60/50 Hz, 40A, 3Ph+N+GND 25kW Media transport: High-precision, adhesive belt conveyor system Fabric feed system: Axial unwinding device with adjustable fabric width and Tensioning mechanisms Max media thickness: 15 mm Max roll width 180 cm Max roll outer diameter: 40 cm Ksdpfx Ajvmdw Ielfelr Max roll weight: 50 kg Compressed air: 6-8 bar/ < 0.4 m³/min

Condition: new, Best price 4499 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 2200x375mm Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Kljdpfx Aodnxydslfor Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Weight: 700 kg * Using the blade 400mm, the smaller should be removed. Reduced saw blade should be used with not more than 350 mm main shield.

Condition: excellent (used), Year of construction: 2004, operating hours: 18,990,620 h, functionality: fully functional, paper width (max.): 520 mm, paper height (max.): 360 mm, type of input current: three-phase, Equipment: documentation/manual, The machine is with console and are also a two-way print. Kodpfowa Ulzsx Alfjlr

Year of construction: 2026, condition: new, functionality: fully functional, Complete plastics recycling line for films and fibre materials from Taiwan leading Plastics Recycling Machinery manufacturer. GENIUS Machinery Co who have more than 30 years of recycling extruder production and experience. Extruder can be fed without size reduction or shredding.. Materials in baled, loose or reel form can be fed. Line can be supplied complete with Belt conveyor, Cutter compactor, Main extruder, Filtration system, (variety of types to suit requirements), Hot pellet die-face cutting device, Centrifugal pellet dryer, Vibrating screener, Storage silo for pellets. Additional ancillary equipment can be supplied . A two stage " Cascade" version is also available for heavily printed films, or very dirty films requiring double filtration. Alternative sizes from 100 kgs per hr up to 1200 kgs per hr can be offered. Full sales and support and training is available in UK and Europe for these extremely modern and economic machines. Kjdpfx Alswg R Rtefjlr

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Cheese vat / Pasteurizer / Process tank 100 liters. Used - 3.5 years old The Vat: - Completely stainless steel - Double jacket (bain-marie) + insulation - Must be operated without pressure - 100 liters - Butterfly valve, NW 50 - Agitator mounted on the lid and easily removed using a quick-change adapter. - Agitator rotates slowly; approximately 24 RPM - 400 volt / 8.4 kW heating (16 amp plug). Heating power can be halved with a switch (8.4 - 4.2 kW). Control: - Digital milk temperature display - PID controller / thermostat Kjdpfowg Ellsx Alfolr - Control system with one automatic program (heating - holding - cooling) and manual operation (manual heating and manual cooling with cold water) - Heats up to 90°C - Cooling with cold water. Water inlet with motor-controlled ball valve.

Condition: ready for operation (used), Year of construction: 2014, Printing technology: piezo DOD printheads: Xaar 1001, resolution: 720x360dpi, drying: 1xUV GOZ and 1xUV FOZ Höhnle with 7,2kW, pinning system (LED) after printing unit 1+5, extraction: in the drying unit for cooling the UV lamps and for odor minimization and improvement of sensory conditions, inert gas system: oxygen-reduced curing unit (inert gas system), consumption: under 6m³/h, printing: roll-to-roll, web width: 350mm, print width: 330mm, repeat length: min./max. printable section length 10-1000mm, print tolerance: single spacing +/-0,2mm, cumulative spacing: +/-1,5mm (over one meter), register: register accuracy +/-50μm, max. speed: 48m/min with 4 colors depending on ink coverage, white at 30m/min, speed must be preselected from 18 to 48m/min, print pre-treatment: corona with 1500VA, web cleaning: polymer rollers LC 350, air shafts: for cores with 76mm diameter for unwinding and rewinding, air shaft clamping pneumatic, clamping releasable to allow rotation of the winding mandrel, max. roll diameter for unwinding and rewinding: 610mm, max. roll weight for unwinding and rewinding: 120kg. power consumption: approx. 39kVA/60A, air consumption: 100NL/min, cooling capacity: approx. 60.000BTU/h =18kW, data interface: USB2.0, Ethernet, data format: PDF-X1 or X3 or EPS or AI, length: 4550mm, width: 1750mm, height: 2200mm, weight: approx. 3t. With documentation, chiller unit and inks. The machine is fault-free, complete and ready for operation, and has been serviced regularly. On-site inspection is possible. Klsdpfx Ajxz Ewnelfor

Condition: refurbished (used), Dry board sorting line - dry board sorting line - 20 pockets - belt - automatic spacer collection - Trimmer Almab with 16 saw blades Klsdpfsvzqcysx Alfer - automation- TG automation, Sweden Sorting - Dynalyse MC Pro 2400 System - marking/printer - Alpha Dot Merlyn 350 - Drum chipper Erjo 204 MA - stacker Almab with 9 cassettes - Pack press

Condition: used, Year of construction: 1998, machine/vehicle number: 100057, 1998 AMADA VIPROS 2510 KING The punching machine is in good condition, always serviced on time by Amada service. All documentation is included. This machine can be operated with a punching force of 196 kN. Made in Japan. The punching machine is still under power and can be tested at any time in Vilnius, Lithuania. Specification: Klsdpfx Aom Ncayolfsr Model: AMADA VIPROS 2510K Serial no: 100057 Year: 1998 Made in: Japan Punching force: 20 tons Stations: 31 Tools: included (RO 6; RO 6,5; RO 3; RE 30x5; RE 25x5; RE 80x5; RO 5; RO 3,5; RE 10x3; RE 10x5; RE 50x5; RE 8x12) Maximum sheet thickness: 3 mm X-axis movement: 2500 mm Y axis travel: 1270 mm Weight: 11 000 kg Location: Vilnius, Lithuania Testable: Yes If you have any questions, please do not hesitate to contact us.

Condition: new, Year of construction: 2025, MACHINERY WILL BE BRAND NEW The machinery is available to bale aluminum cans as well as steel cans up to 0.2 mm of the thickness and 3 liters of the volume. All electric-electronic materials will be from Schneider and Siemens Brand. The machine will be fully automatic with PLC control and a touch screen Siemens HMI Simatic Panel with emergency buttons. Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for one (1) year or two thousand five hundred (2.500) operation hours, whichever comes first. There will be an Oil cooling/heating system depending on the operation zone. MB 500 Magnetic Separator and VH (120-250) Vibration Hopper are optional for separating the scrap aluminum and steel cans and for getting rid of the dirt and dust in the scrap. Kledporc Dkqofx Alfer Technical Specifications: Bale Size: 500mm x 330mm x ... Container Dimension (Width x Length x Height): 500mm x 1.000mm x 330mm Capacity Up to 1.000 kg/hour (Aluminum) Up to 2.000 kg/hour (Steel) Bale weighs with a mechanic scale system: 10-20 kg Cycle Time: 30 seconds Top Cover Cylinder Force: 25 tons Main Compression Cylinder Force: 100 tons General Working Pressure: 225 bars Machine Dimensions (Width x Length x Height): 1.100mm x 4.200mm x 2.600mm Electric Motor: 18,5 kW Machine Weight: 5.000 kg

Year of construction: 2008, condition: excellent (used), SMG HZPU 8000-3000/2100-S1 Hydraulic Drawing Press Brand SMG Type HZPU 8000-3000/2100-S1 Kedpfon Awd Rex Alfelr Year 1995 Description Hydraulic Drawing Press H frame hydraulic press Pressing force 800 ton Clamping area Approx. 3,000 x 2,100 mm Installation height Max. 1,400 mm